TPP OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE. Application Specific Discretes A.S.D.

Size: px
Start display at page:

Download "TPP OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE. Application Specific Discretes A.S.D."

Transcription

1 Application Specific Discretes A.S.D. OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE FEATURES UNIDIRECTIONAL FUNCTION PROGRAMMABLE BREAKDOWN VOLTAGE UP TO 250 V PROGRAMMABLE CURRENT LIMITATION FROM 40 ma TO 500 ma SURGE CURRENT CAPABILITY I PP = 30A 10/1000 µs DESCRIPTION Dedicated to sensitive telecom equipment protection, this device can provide both voltage and current triggered protection with a very tight tolerance. The breakdown voltage can be easily programmed by using an external zener diode. A multiple protection mode can be also performed when using several zener diodes, providing to each line interface an optimized protection level. The current limiting function is achieved with the use of a resistor between the gate and the cathode. The value of the resistor will determine the level of the desired current. SCHEMATIC DIAGRAM SO-8 COMPLIES WITH THE FOLLOWING STANDARDS : CCITT K17 : 10/700 µs 1.5 kv 5/310 µs 38 A VDE 0433 : 10/700 µs 2k V 5/310 µs 40 A (*) CNET : 0.5/700 µs 1.5 kv 0.2/310 µs 38 A FCC part 68 : 2/10 µs 2.5 kv 2/10 µs 75 A (*) BELLCORE TR-NWT : 10/1000 µs 1 kv 10/1000 µs 30 A (*) (*) with series resistors or PTC. TM: ASD is trademarks of STMicroelectronics. October Ed: 5 1/7

2 ABSOLUTE MAXIMUM RATINGS (T amb =25 C) Symbol Parameter Value Unit I PP Peak pulse current (see note 1) 10/1000µs 5/310µs 2/10µs I TSM T stg T j Non repetitive surge peak on-state current (F = 50Hz) Storage temperature range Maximum junction temperature t p = 10ms t=1s to A A C Note 1 : Pulse waveform : 10/1000µs t r =10µs t p =1000µs 5/310µs t r =5µs t p =310µs 2/10µs t r =2µs t p =10µs 100 %I PP 50 0 tr tp t THERMAL RESISTANCES Symbol Parameter Value Unit R th (j-a) Junction to ambient 170 C/W 2/7

3 ELECTRICAL CHARACTERISTICS (T amb = 25 C) Symbol V RM I RM V BR V BO I H I BO I PP V GN I G C Parameter Stand-off voltage Leakage current at stand-off voltage Breakdown voltage Breakover voltage Holding current Breakover current Peak pulse current Gate voltage Gate triggering current Capacitance 1 - OPERATION WITHOUT GATE Type I RM V I R BO I H C max. min. max. min. note1 max. min. note 2 max. note 3 µa V V ma V ma ma ma pf OPERATION WITH GATE Type V GN =30mA I G Note 1: See the reference test circuit 1. Note 2: See test circuit 2. Note 3: V R = 5V, F = 1MHz min. max. min. max. note 4 V A-C = 100 V V V ma ma /7

4 REFERENCE TEST CIRCUIT 1 : Auto Transformer 220V/2A static relay. tp =20ms R1 140 R V V out K I BO measure D.U.T VBO measure TEST PROCEDURE : Transformer 220V/800V 5A Pulse Test duration (tp = 20ms): - For Bidirectional devices = Switch K is closed - For Unidirectional devices = Switch K is open. V OUT Selection - Device with V BO < 200 Volt -V OUT = 250 V RMS,R 1 = 140 Ω. - Device with V BO 200 Volt -V OUT = 480 V RMS,R 2 = 240 Ω. FUNCTIONAL HOLDING CURRENT (I H ) TEST CIRCUIT 2=GO-NOGO TEST R V BAT =-48V D.U.T. -V P Surge generator This is a GO-NOGO Test which allows to confirm the holding current (I H ) level in a functional test circuit. TEST PROCEDURE : 1) Adjust the current level at the I H value by short circuiting the AK of the D.U.T. 2) Fire the D.U.T with a surge Current : Ipp = 10A, 10/1000 µs. 3) The D.U.T will come back off-state within 50 ms max. 4/7

5 APPLICATION CIRCUIT Overvoltage protection and current limitation TPP250 Table below gives the tolerance of the limited current IT for each standardized resistor value. CURRENT TOLERANCE R Ω ( ± 5%) I T ma min I T ma max Line - + LOAD 5/7

6 Telephone set protection PROTECTION MODES : OFF HOOK = Ringer circuit protection is insured with intrinsic breakdown voltage at 250 V ON HOOK = In dialing mode and in conversation mode, the breakdown voltage of TPP250 can be adapted at different levels with zener diodes. ORDER CODE TPP RL Telecom Programmable Protection Breakdown voltage Version Packaging: RL = Tape & reel = Tube Package: 1 = SO-8 Plastic 6/7

7 MARKING Package Type Marking SO-8 TPP250 PACKAGE MECHANICAL DATA SO-8 Plastic DIMENSIONS REF. Millimetres Inches Min. Typ. Max. Min. Typ. Max. A a a b b C c1 45 (typ) D E e e F L M S 8 (max) Packaging : Products supplied antistatic tubes or tape and reel. Weight :0.08g Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States 7/7

THBTxxx11D TRIPOLAR OVERVOLTAGE PROTECTION FOR TELECOM LINE. Application Specific Discretes A.S.D. 8 TIP 7 GND 6 GND 5 RING GND 3 RING FEATURES

THBTxxx11D TRIPOLAR OVERVOLTAGE PROTECTION FOR TELECOM LINE. Application Specific Discretes A.S.D. 8 TIP 7 GND 6 GND 5 RING GND 3 RING FEATURES Application Specific Discretes A.S.D. THBTxxx11D TRIPOLAR OEROLTAGE PROTECTION FOR TELECOM LINE FEATURES n BIDIRECTIONAL CROWBAR PROTECTION BETWEEN TIP AND, AND AND BETWEEN TIP AND. n PEAK PULSE CURRENT

More information

LCP1511D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION. Application Specific Discretes A.S.D. TIP TIP GATE GND GND RING FEATURES SO-8

LCP1511D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION. Application Specific Discretes A.S.D. TIP TIP GATE GND GND RING FEATURES SO-8 Application Specific Discretes A.S.D. LCP111D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION FEATURES n DUAL PROGRAMMABLE TRANSIENT SUP- PRESSOR. n WIDE NEGATIVE FI VOLTAGE RANGE : V MGL

More information

BZW06-5V8/376 BZW06-5V8B/376B

BZW06-5V8/376 BZW06-5V8B/376B BZW06-5V8/376 BZW06-5V8B/376B TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 5.8V to 376 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL

More information

LCDP1521. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits. Functional diagram

LCDP1521. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits. Functional diagram LCDP121 Dual line programmable transient voltage suppressor for SLIC protection Features Dual line programmable transient voltage suppressor Wide negative firing voltage range: V MGL = -10 V max. Low dynamic

More information

SMP30 TRISIL FOR TELECOM EQUIPMENT PROTECTION

SMP30 TRISIL FOR TELECOM EQUIPMENT PROTECTION SMP3 TRISIL FOR TELECOM EQUIPMENT PROTECTION FEATURES Bidirectional crowbar protection Voltage range from 62V to 27V Low capacitance from 1pF to 2pF typ.@ 5V Low leakage current: I R = 2µA max. Holding

More information

SMP100LC-65 TRISIL FOR TELECOM EQUIPMENT PROTECTION

SMP100LC-65 TRISIL FOR TELECOM EQUIPMENT PROTECTION SMP1LC TRISIL FOR TELECOM EQUIPMENT PROTECTION FEATURES Bidirectional crowbar protection Voltage range from 8V to 4V Low capacitance from 2pF to 45pF @ 5V Low leakage current : I R = 2µA max Holding current:

More information

Symbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case

Symbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case BZW50-10,B/180,B TRANSIL TM FEATURES PEAK PULSE POWER : 5000 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION

More information

t p = 10 ms T j initial = T amb

t p = 10 ms T j initial = T amb P6KE TRANSIL FEATURES Peak pulse power: 600 W (/0 µs ) Stand-off voltage range 6.8 to 440V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil

More information

ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D.

ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D. Application Specific Discretes A.S.D. ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : COMPUTERS PRINTERS

More information

TPN3021. Tripolar overvoltage protection for network interfaces. Features. Applications. Description. Benefits

TPN3021. Tripolar overvoltage protection for network interfaces. Features. Applications. Description. Benefits TPN321 Tripolar overvoltage protection for network interfaces Features Triple crowbar protection Low capacitance Low holding current: I H = 3 ma minimum Surge current: I PP = 2 A, 2/1 µs I PP = 3 A, 1/1

More information

LCP02-150B1 PROTECTION IC FOR RINGING SLICS TIP GND GND RING A.S.D.

LCP02-150B1 PROTECTION IC FOR RINGING SLICS TIP GND GND RING A.S.D. A.S.D. PROTECTION IC FOR ING SLICS FEATURES Protection IC recommended for ringing SLICs. Wide firing voltage range: from -11V to +95V. Low gate triggering current: I G = 5mA max. Peak pulse current: I

More information

LCP1511D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION. Application Specific Discretes A.S.D. TIP GND GND RING

LCP1511D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION. Application Specific Discretes A.S.D. TIP GND GND RING Application Specific Discretes A.S.D. LCP111D PROGRAMMABLE TRANSIENT VOLTAGE SUPPRESSOR FOR SLIC PROTECTION FEATURES DUAL PROGRAMMABLE TRANSIENT SUP- PRESSOR. WIDE NEGATIVE FI VOLTAGE RANGE : VMGL = -0V

More information

LCDP1521S. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits

LCDP1521S. Dual line programmable transient voltage suppressor for SLIC protection. Features. Description. Benefits LCDP121S Dual line programmable transient voltage suppressor for SLIC protection Features Dual line programmable transient voltage suppressor with separated gates Wide negative firing voltage range: V

More information

ESDALC6V1W5. Quad TRANSIL array for data protection. Main applications. Features. Description. Benefits SOT323-5L. Order codes

ESDALC6V1W5. Quad TRANSIL array for data protection. Main applications. Features. Description. Benefits SOT323-5L. Order codes Quad TRANSIL array for data protection Main applications Where transient overvoltage protection in ESD sensitive equipment is required, such as : Computers Printers Communication systems Cellular phones

More information

STD10NF10 N-CHANNEL 100V Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET

STD10NF10 N-CHANNEL 100V Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET N-CHANNEL 100V - 0.115 Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STD10NF10 100 V

More information

STPS20120D POWER SCHOTTKY RECTIFIER. Table 1: Main Product Characteristics I F(AV) 20 A V RRM. 120 V T j (max) 175 C V F (typ) 0.

STPS20120D POWER SCHOTTKY RECTIFIER. Table 1: Main Product Characteristics I F(AV) 20 A V RRM. 120 V T j (max) 175 C V F (typ) 0. STPS22D POWER SCHOTTKY RECTIFIER Table : Main Product Characteristics I F(AV) 2 A V RRM 2 V T j (max) 75 C V F (typ).54 V FEATURES AND BENEFITS High junction temperature capability Avalanche rated Low

More information

SMP80MC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards

SMP80MC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards SMP8MC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage: range from 12 V to 32 V Low V BO / V R ratio Micro capacitance equal to 12 pf @ 5 V Low leakage current:

More information

GND IEC level 4 15 kv (air discharge) 8 kv (contact discharge) I/O5 MIL STD 883G- Method : class 3B 25 kv (human body model)

GND IEC level 4 15 kv (air discharge) 8 kv (contact discharge) I/O5 MIL STD 883G- Method : class 3B 25 kv (human body model) Transil array for data line protection Features High surge capability Transil array: I PP = 40 A (8/20 µs) Peak pulse power : 300 W (8/20 µs) Up to 6 bidirectional Transil functions Low clamping factor

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY

More information

TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING

TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING 1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip

More information

BTA40 and BTA/BTB41 Series

BTA40 and BTA/BTB41 Series BTA4 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

ACS1026T. AC switch family Transient protected AC switch (ACS ) Main product characteristics OUT COM TO-92 SO-8 ACS102-6T1 ACS102-6T1-TR.

ACS1026T. AC switch family Transient protected AC switch (ACS ) Main product characteristics OUT COM TO-92 SO-8 ACS102-6T1 ACS102-6T1-TR. AC switch family Transient protected AC switch (ACS ) Main product characteristics Overvoltage protection by crowbar technology High noise immunity - static dv/dt > 300 V/µs Applications AC ON/OFF static

More information

Value Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)

Value Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C) MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge

More information

SMTYF. Low forward voltage TVS Transky. Features. Description. Complies with the following standards:

SMTYF. Low forward voltage TVS Transky. Features. Description. Complies with the following standards: Low forward voltage TVS Transky Features High peak pulse power: 600 W (10/1000 µs) 4000 W (8/20 µs) Stand-off voltage 5 or 12 V Low forward voltage: 0.48 V @ 0.85 A @ 25 C K A Low clamping factor V CL

More information

TS HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE

TS HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE LOW Tc: ppm/ C MAXIMUM.V OUTPUT VOLTAGE LOW OPERATING CURRENT: 6µA max @ C HIGH PRECISION AT C: ±.% AND ±% STABLE WHEN USED WITH CAPACITIVE LOADS

More information

STD20NF06L N-CHANNEL 60V Ω - 24A DPAK/IPAK STripFET II POWER MOSFET

STD20NF06L N-CHANNEL 60V Ω - 24A DPAK/IPAK STripFET II POWER MOSFET Table 1: General Features N-CHANNEL 60V - 0.032 Ω - 24A DPAK/IPAK STripFET II POWER MOSFET Figure 1:Package TYPE V DSS R DS(on) I D -1 60 V 60 V TYPICAL R DS (on) = 0.032 Ω < 0.040 Ω < 0.040 Ω EXCEPTIONAL

More information

STS7PF30L P-CHANNEL 30V Ω - 7A - SO-8 STripFET II Power MOSFET General features Description Internal schematic diagram

STS7PF30L P-CHANNEL 30V Ω - 7A - SO-8 STripFET II Power MOSFET General features Description Internal schematic diagram P-CHANNEL 30V - 0.16Ω - 7A - SO-8 STripFET II Power MOSFET General features Type V DSS R DS(on) I D STS7PF30L 30V

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) BYT 30P-1000 FAST RECOVERY RECTIFIER DIODE VERY HIGH REVERSE VOLTAGE CAPABILITY VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING SUITABLE APPLICATIONS FREE WHEELING

More information

STIEC45-XXAS. Transil for IEC compliance. Features. Description. Complies with the following standards

STIEC45-XXAS. Transil for IEC compliance. Features. Description. Complies with the following standards Transil for IEC 61000-4-5 compliance Features Peak pulse current: 500 A (8/20 μs, 1.2/50 µs) Stand off voltage range: from 24 to 33 Unidirectional types Low leakage current 0.2 µa at 25 C 1 µa at 85 C

More information

TSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR

TSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER

More information

-55 to 175 C T j ( ) Pulse width limited by safe operating area.

-55 to 175 C T j ( ) Pulse width limited by safe operating area. N-CHANNEL 60V - 0.020 Ω - 28A IPAK/DPAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D 60 V

More information

STGP10NB60SD. N-CHANNEL 10A - 600V - TO-220 Low Drop PowerMESH IGBT. General features. Description. Internal schematic diagram.

STGP10NB60SD. N-CHANNEL 10A - 600V - TO-220 Low Drop PowerMESH IGBT. General features. Description. Internal schematic diagram. STGP10NB60SD N-CHANNEL 10A - 600V - TO-220 Low Drop PowerMESH IGBT General features Type V CES V CE(sat) (Max)@ 25 C I C @100 C STGP10NB60SD 600V < 1.7V 10A HIGH CURRENT CAPABILITY HIGH INPUT IMPEDANCE

More information

STP80NF10 STB80NF10 N-CHANNEL 100V Ω - 80A - TO-220/D 2 PAK LOW GATE CHARGE STripFET II MOSFET

STP80NF10 STB80NF10 N-CHANNEL 100V Ω - 80A - TO-220/D 2 PAK LOW GATE CHARGE STripFET II MOSFET STP80NF10 STB80NF10 N-CHANNEL 100V - 0.012Ω - 80A - TO-220/D 2 PAK LOW GATE CHARGE STripFET II MOSFET Table 1: General Features Figure 1: Package TYPE V DSS R DS(on) I D STB80NF10 STP80NF10 100 V 100 V

More information

STF12PF06 P-CHANNEL 60V Ω - 12A TO-220/TO-220FP STripFET II POWER MOSFET

STF12PF06 P-CHANNEL 60V Ω - 12A TO-220/TO-220FP STripFET II POWER MOSFET STP12PF06 STF12PF06 P-CHANNEL 60V - 0.18 Ω - 12A TO-220/TO-220FP STripFET II POWER MOSFET Table 1: General Features TYPE V DSS R DS(on) I D Figure 1:Package STP12PF06 STF12PF06 60 V 60 V TYPICAL R DS (on)

More information

SMA6F. High junction temperature Transil. Features. Description. Complies with the following standards

SMA6F. High junction temperature Transil. Features. Description. Complies with the following standards High junction temperature Transil Features ECOPACK 2 compliant product Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Stand off voltage: 5, 12 or 13 V Unidirectional type Low clamping voltage versus

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) STP60NE06-16 STP60NE06-16FP N-CHANNEL 60V - 0.013 Ω - 60A TO-220/TO-220FP "SINGLE FEATURE SIZE " POWER MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STP60NE06-16 60 V < 0.016

More information

1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional

1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional 1N5908 SM5908 Transil Features Peak pulse power: 1500 W (10/1000 μs) Stand off voltage: 5 V Unidirectional A A Operating T jmax : 175 C High power capability at T jmax : 1500 W (10/1000 µs) JEDEC registered

More information

1.5KE. Transil. Features. Description

1.5KE. Transil. Features. Description Transil Datasheet production data Features Peak pulse power: 1500 W (/0 µs) Breakdown voltage range: From 6.8 V to 440 V Uni and bidirectional types Low clamping factor Fast response time UL 497B file

More information

SMP100LC. Trisil for telecom equipment protection. Features. Main applications. Description. Order code. Benefits

SMP100LC. Trisil for telecom equipment protection. Features. Main applications. Description. Order code. Benefits SMP1LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 4 V Low capacitance from 2 pf to 45 pf @ 5 V Low leakage current : I R = 2 µa max Holding

More information

SD1488 RF POWER BIPOLAR TRANSISTORS UHF MOBILE APPLICATIONS

SD1488 RF POWER BIPOLAR TRANSISTORS UHF MOBILE APPLICATIONS RF POWER BIPOLAR TRANSISTORS UHF MOBILE APPLICATIONS FEATURES SUMMARY 470 MHz 12.5 VOLTS EFFICIENCY % COMMON EMITTER P OUT = 38 W MIN. WITH 5.8 db GAIN DESCRIPTION The SD1488 is a 12.5 V Class C epitaxial

More information

LM217L LM317L LOW CURRENT 1.2 TO 37V ADJUSTABLE VOLTAGE REGULATOR

LM217L LM317L LOW CURRENT 1.2 TO 37V ADJUSTABLE VOLTAGE REGULATOR LM217L LM317L LOW CURRENT 1.2 TO 37V ADJUSTABLE VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 100 ma LINE REGULATION TYP. 0.01% LOAD REGULATION TYP. 0.1% THERMAL OVERLOAD

More information

STP36NF06 STP36NF06FP

STP36NF06 STP36NF06FP STP36NF06 STP36NF06FP N-CHANNEL 60V - 0.032 Ω - 30A TO-220/TO-220FP STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STP36NF06 STP36NF06FP 60 V 60 V TYPICAL R DS (on) = 0.032 Ω

More information

SMA4F. High junction temperature Transil. Features. Description. Complies with the following standards

SMA4F. High junction temperature Transil. Features. Description. Complies with the following standards High junction temperature Transil Features ECOPACK2 halogen-free component Peak pulse power: 400 W (10/1000 µs) 3 kw (8/20 µs) Stand off voltage: 5 V Unidirectional type Low clamping voltage versus standard

More information

STD12NF06L N-CHANNEL 60V Ω - 12A IPAK/DPAK STripFET II POWER MOSFET

STD12NF06L N-CHANNEL 60V Ω - 12A IPAK/DPAK STripFET II POWER MOSFET N-CHANNEL 60V - 0.08 Ω - 12A IPAK/DPAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D 60 V < 0.1 Ω 12 A TYPICAL R DS (on) = 0.08 Ω EXCEPTIONAL dv/dt CAPABILITY LOW GATE CHARGE LOW THRESHOLD DRIVE THROUGH-HOLE

More information

ESDAxxxP6 ASD. Transil array for ESD protection. Main applications. Order codes. Features. Description. Benefits

ESDAxxxP6 ASD. Transil array for ESD protection. Main applications. Order codes. Features. Description. Benefits ASD Transil array for ESD protection Main applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Servers Printers Communication systems and cellular

More information

HCF4070B QUAD EXCLUSIVE OR GATE

HCF4070B QUAD EXCLUSIVE OR GATE QUAD EXCLUSIVE OR GATE MEDIUM-SPEED OPERATION t PHL =t PLH = 70ns (Typ.) at CL = 50 pf and V DD = 10V QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I

More information

STP55NF03L STB55NF03L STB55NF03L-1 N-CHANNEL 30V Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II POWER MOSFET

STP55NF03L STB55NF03L STB55NF03L-1 N-CHANNEL 30V Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II POWER MOSFET STP55NF03L STB55NF03L STB55NF03L-1 N-CHANNEL 30V - 0.01 Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STP55NF03L STB55NF03L STB55NF03L-1 30 V 30 V 30 V

More information

T2550H-600T 25A TRIACS MAIN FEATURES:

T2550H-600T 25A TRIACS MAIN FEATURES: SNUBBERLESS HIGH TEMPERATURE 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 600 V I GT (Q1 ) 50 ma DESCRIPTION Specifically designed for use in high temperature environment (found

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET TYPE STW20NM50 550V < 0.25Ω 20 A TYPICAL R DS (on) = 0.20Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED LOW INPUT CAPACITANCE AND

More information

Symbol Parameter Value Unit. Note 1 : For a surge greater than the maximum values, the diode will fail in short-circuit. Symbol Parameter Value Unit

Symbol Parameter Value Unit. Note 1 : For a surge greater than the maximum values, the diode will fail in short-circuit. Symbol Parameter Value Unit SM15T6V8A/220A SM15T6V8CA/220CA TRANSIL TM FEATURES PEAK PULSE POWER : 1500 W (10/1000µs) BREAKDOWN VOLTAGE RANGE : From 6.8 V to 220 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME

More information

BAT48 Series. Small signal Schottky diodes. Main product characteristics. Features and benefits. Order codes. Description. BAT48ZFILM (Single) SOD-123

BAT48 Series. Small signal Schottky diodes. Main product characteristics. Features and benefits. Order codes. Description. BAT48ZFILM (Single) SOD-123 Small signal Schottky diodes Main product characteristics I F V RRM C (typ) T j (max) 350 ma 40 V 18 pf 150 C SOD-123 BAT48ZFILM (Single) Features and benefits Low leakage current losses Negligible switching

More information

L9305A DUAL HIGH CURRENT RELAY DRIVER

L9305A DUAL HIGH CURRENT RELAY DRIVER L9305A DUAL HIGH CURRENT RELAY DRIVER. HIGH OUTPUT CURRENT HYSTERESIS INPUT COMPARATOR WITH WIDE RANGE COMMON MODE OPERATION AND GROUND COMPATIBLE INPUTS INPUT COMPARATOR HYSTERESIS INTERNAL THERMAL PROTECTION

More information

HCF4020B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE

HCF4020B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE MEDIUM SPEED OPERATION: 16MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS

More information

STD16NF06. N-Channel 60V Ω - 16A - DPAK STripFET II Power MOSFET. General features. Description. Internal schematic diagram.

STD16NF06. N-Channel 60V Ω - 16A - DPAK STripFET II Power MOSFET. General features. Description. Internal schematic diagram. N-Channel 60V - 0.060Ω - 16A - DPAK STripFET II Power MOSFET General features Type V DSS R DS(on) I D STD16NF06 60V

More information

MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS

MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS MJD122-1 / MJD122T4 MJD127-1 / MJD127T4 COMPLEMENTARY POWER DARLINGTON TRANSISTORS Ordering Code Marking Package Shipment MJD122T4 MJD122-1 MJD127T4 MJD127-1 MJD122 MJD122 MJD127 MJD127 TO-252 (DPAK) TO-251

More information

IRF540 N-CHANNEL 100V Ω - 22A TO-220 LOW GATE CHARGE STripFET II POWER MOSFET

IRF540 N-CHANNEL 100V Ω - 22A TO-220 LOW GATE CHARGE STripFET II POWER MOSFET N-CHANNEL 100V - 0.055 Ω - 22A TO-220 LOW GATE CHARGE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D IRF540 100 V

More information

SMM4F12AVCL. 400 W low clamping voltage Transil. Features. Description. Complies with the following standards

SMM4F12AVCL. 400 W low clamping voltage Transil. Features. Description. Complies with the following standards 400 W low clamping voltage Transil Features Typical peak pulse power: 400 W (10/1000 µs) 2.4 kw (8/20 µs) Stand off voltage: 12 V Unidirectional type Low clamping factor Low leakage current: 0.2 µa at

More information

BU941ZP BU941ZPFI HIGH VOLTAGE IGNITION COIL DRIVER NPN POWER DARLINGTON TRANSISTORS. Figure 1: Package

BU941ZP BU941ZPFI HIGH VOLTAGE IGNITION COIL DRIVER NPN POWER DARLINGTON TRANSISTORS. Figure 1: Package BU941ZP BU941ZPFI HIGH VOLTAGE IGNITION COIL DRIVER NPN POWER DARLINGTON TRANSISTORS n n n n VERY RUGGED BIPOLAR TECHNOLOGY BUILT IN CLAMPING ZENER HIGH OPERATING JUNCTION TEMPERATURE FULLY INSULATED PACKAGE

More information

SMP100LC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards

SMP100LC. Trisil for telecom equipment protection. Features. Description. Applications. Benefits. Complies with the following standards SMP1LC Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 8 V to 4 V Low capacitance from 2 pf to 45 pf @ 2 V Low leakage current: I R = 2 µa max Holding

More information

LM723 HIGH PRECISION VOLTAGE REGULATOR

LM723 HIGH PRECISION VOLTAGE REGULATOR HIGH PRECISION VOLTAGE REGULATOR INPUT VOLTAGE UP TO 40V OUTPUT VOLTAGE ADJUSTABLE FROM 2 TO 37V POSITIVE OR NEGATIVE SUPPLY OPERATION SERIES, SHUNT, SWITCHING OR FLOATING OPERATION OUTPUT CURRENT TO 150mA

More information

Table 3: Absolute Maximum Ratings Symbol Parameter Value Unit I T(RMS) RMS on-state current (full sine wave) T l = 50 C 0.8 A

Table 3: Absolute Maximum Ratings Symbol Parameter Value Unit I T(RMS) RMS on-state current (full sine wave) T l = 50 C 0.8 A 查询 2BL2 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 STANDARD 0.8A TRIAC Table 1: Main Features Symbol Value Unit I T(RMS) 0.8 A V DRM /V RRM 600 V I GT (Q1 ) 5 ma G A2 A1 DESCRIPTION The is suitable for low power AC

More information

STPSC V power Schottky silicon carbide diode. Features. Description

STPSC V power Schottky silicon carbide diode. Features. Description 600 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) N-CHANNEL 30V - 0.016 Ω - 9A SO-8 LOW GATE CHARGE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STS9NF3LL 30 V

More information

STD7NS20 STD7NS20-1 N-CHANNEL 200V Ω - 7A DPAK / IPAK MESH OVERLAY MOSFET

STD7NS20 STD7NS20-1 N-CHANNEL 200V Ω - 7A DPAK / IPAK MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STD7NS20 STD7NS20-1 N-CHANNEL 200V - 0.35Ω - 7A DPAK / IPAK MESH OVERLAY MOSFET PRELIMINARY DATA STD7NS20 STD7NS20-1 200 V 200 V < 0.40 Ω < 0.40 Ω 7A 7A TYPICAL R DS (on) = 0.35

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM150/LM250 LM350 THREE-TERMINAL 3 A ADJUSTABLE VOLTAGE REGULATORS GUARANTEED

More information

STD5NM50 STD5NM50-1 N-CHANNEL 500V - 0.7Ω - 7.5A DPAK/IPAK MDmesh Power MOSFET

STD5NM50 STD5NM50-1 N-CHANNEL 500V - 0.7Ω - 7.5A DPAK/IPAK MDmesh Power MOSFET STD5NM50 STD5NM50-1 N-CHANNEL 500V - 0.7Ω - 7.5A DPAK/IPAK MDmesh Power MOSFET TYPE V DSS R DS(on) I D STD5NM50 STD5NM50-1 500V 500V

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) TRIPLE 3-INPUT NOR GATE HIGH SPEED: t PD = 4.1 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) P-CHANNEL 20V - 0.065Ω - 5ASOT23-6L 2.5V-DRIVE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STT5PF20V 20 V < 0.080 Ω (@4.5V)

More information

t p = 10 ms T j initial = T amb -65 to T L Maximum lead temperature for soldering during 10 s. 260 C

t p = 10 ms T j initial = T amb -65 to T L Maximum lead temperature for soldering during 10 s. 260 C SMAJ TRANSIL FEATURES Peak Pulse Power : 400 W (10/0µs) Stand off voltage range: From 5V to 188V Uni and Bidirectional types Low clamping factor Fast response time JEDEC registered package outline K A

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) MMBT2222A APPLICATIONS WELL SUITABLE FOR PORTABLE EQUIPMENT SMALL LOAD SWITCH TRANSISTOR WITH HIGH GAIN AND LOW SATURATION OLTAGE SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Type Marking MMBT2222A M22

More information

L4940 SERIES VERY LOW DROP 1.5A REGULATORS

L4940 SERIES VERY LOW DROP 1.5A REGULATORS L4940 SERIES VERY LOW DROP 1.5A REGULATORS PRECISE 5, 8.5, 10, 12V OUTPUTS LOW DROPOUT VOLTAGE (500mV Typ. at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Low forward voltage TVS: Transky Main applications Power rail ESD transient over-voltages and reverse voltages protection for 5 and 12 V supplied IC s Description The Transky is designed specifically for

More information

74VHC20 DUAL 4-INPUT NAND GATE

74VHC20 DUAL 4-INPUT NAND GATE DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 3.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) BUL138FP HIGH OLTAGE FAST-SWITCHING NPN POWER TRANSISTOR STMicroelectronics PREFERRED SALESTYPE NPN TRANSISTOR HIGH OLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD FOR RELIABLE

More information

STY60NM50 N-CHANNEL 500V Ω - 60A Max247 Zener-Protected MDmesh Power MOSFET

STY60NM50 N-CHANNEL 500V Ω - 60A Max247 Zener-Protected MDmesh Power MOSFET N-CHANNEL 500V - 0.045Ω - 60A Max247 Zener-Protected MDmesh Power MOSFET TYPE V DSS R DS(on) I D STY60NM50 500V < 0.05Ω 60 A TYPICAL R DS (on) = 0.045Ω HIGH dv/dt AND AVALANCHE CAPABILITIES IMPROVED ESD

More information

SD1275 RF POWER BIPOLAR TRANSISTORS VHF MOBILE APPLICATIONS. FEATURES SUMMARY 160 MHz 13.6 VOLTS COMMON EMITTER P OUT = 40 W MIN.

SD1275 RF POWER BIPOLAR TRANSISTORS VHF MOBILE APPLICATIONS. FEATURES SUMMARY 160 MHz 13.6 VOLTS COMMON EMITTER P OUT = 40 W MIN. RF POWER BIPOLAR TRANSISTORS VHF MOBILE APPLICATIONS FEATURES SUMMARY 1 MHz 13.6 VOLTS COMMON EMITTER P OUT = W MIN. WITH 9 db GAIN Figure 1. Package DESCRIPTION The SD1275 is a 13.6 V Class C epitaxial

More information

TDA0161. Proximity Detectors. Features. Description. Block Diagram. 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V

TDA0161. Proximity Detectors. Features. Description. Block Diagram. 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V Proximity Detectors Features 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V Description These monolithic integrated circuits are designed for metallic body detection by sensing

More information

74LX1G132CTR SINGLE 2-INPUT SCHMITT NAND GATE

74LX1G132CTR SINGLE 2-INPUT SCHMITT NAND GATE SINGLE 2-INPUT SCHMITT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 5.5ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C TYPICAL HYSTERESIS: V h =1V at V CC =4.5V POWER DOWN PROTECTION

More information

L9686D AUTOMOTIVE DIRECTION INDICATOR

L9686D AUTOMOTIVE DIRECTION INDICATOR L9686 AUTOMOTIVE DIRECTION INDICATOR RELAY DRIVER IN CAR DIRECTION INDICATORS FLASH FREQUENCY DOUBLES TO INDI- CATE LAMP FAILURE DUMP PROTECTION ( ± 80 V) REVERSE BATTERY PROTECTION DESCRIPTION The L9686

More information

MMBT2222A SMALL SIGNAL NPN TRANSISTOR

MMBT2222A SMALL SIGNAL NPN TRANSISTOR SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Type Marking M22 SILICON EPITAXIAL PLANAR NPN TRANSISTOR MINIATURE SOT-23 PLASTIC PACKAGE FOR SURFACE MOUNTING CIRCUITS TAPE & REEL PACKING THE PNP COMPLEMENTARY

More information

2N2219A 2N2222A HIGH SPEED SWITCHES

2N2219A 2N2222A HIGH SPEED SWITCHES 2N2219A 2N2222A HIGH SPEED SWITCHES PRELIMINARY DATA DESCRIPTION The 2N2219A and 2N2222A are silicon Planar Epitaxial NPN transistors in Jedec TO-39 (for 2N2219A) and in Jedec TO-18 (for 2N2222A) metal

More information

TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER

TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER STTH22TV TURBO 2 ULTRAAST HIGH VOLTAGE RECTIIER MAIN PRODUCT CHARACTERISTICS I (AV) Up to 2 x 12 A V RRM 2 V T j 15 C V (typ).75 V t rr (typ) 41 ns EATURES AND BENEITS Suited for SMPS Very Low orward Losses

More information

STS7PF30L P-CHANNEL 30V Ω - 7ASO-8 STripFET II POWER MOSFET

STS7PF30L P-CHANNEL 30V Ω - 7ASO-8 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STS7PF30L P-CHANNEL 30V - 0.016Ω - 7ASO-8 STripFET II POWER MOSFET PRELIMINARY DATA STS7PF30L 30 V < 0.021 Ω 7A TYPICAL R DS (on) = 0.016Ω STANDARD OUTLINE FOR EASY AUTOMATED SURFACE

More information

STG719 LOW VOLTAGE 4Ω SPDT SWITCH

STG719 LOW VOLTAGE 4Ω SPDT SWITCH LOW VOLTAGE 4Ω SPDT SWITCH HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 5V t PD = 0.4ns (TYP.) at V CC = 3.3V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C LOW "ON" RESISTANCE: R ON = 4Ω (MAX. T A

More information

STW9NC80Z N-CHANNEL 800V Ω - 9.4A TO-247 Zener-Protected PowerMESH III MOSFET

STW9NC80Z N-CHANNEL 800V Ω - 9.4A TO-247 Zener-Protected PowerMESH III MOSFET N-CHANNEL 800V - 0.82Ω - 9.4A TO-247 Zener-Protected PowerMESH III MOSFET TYPE V DSS R DS(on) I D STW9NC80Z 800 V

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) PN2222A ABSOLUTE MAXIMUM RATINGS SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Ordering Code Marking Package / Shipment PN2222A PN2222A TO-92 / Bulk PN2222A-AP PN2222A TO-92 / Ammopack SILICON EPITAXIAL

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) SINGLE 2-INPUT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.7ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT

More information

STP08CL596 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER

STP08CL596 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE POWER SUPPLY DOWN TO 3V 8 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA

More information

Table 3: Absolute Ratings (limiting values) Symbol Parameter Value Unit V RRM Repetitive peak reverse voltage 40 V I F(RMS) RMS forward voltage 7 A

Table 3: Absolute Ratings (limiting values) Symbol Parameter Value Unit V RRM Repetitive peak reverse voltage 40 V I F(RMS) RMS forward voltage 7 A SPS4 POWER SCHOKY RECIFIER able : Main Product Characteristics I F(AV) A V RRM 4 V j (max) 5 C V F (max).5 V FEAURES AND BENEFIS Very small conduction losses Negligible switching losses Low forward voltage

More information

74VHC174 HEX D-TYPE FLIP FLOP WITH CLEAR

74VHC174 HEX D-TYPE FLIP FLOP WITH CLEAR HEX D-TYPE FLIP FLOP WITH CLEAR HIGH SPEED: f MAX = 175MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION

More information

100 A Tj initial = T amb -65to T L Maximum lead temperature for soldering during 10 s. 260 C

100 A Tj initial = T amb -65to T L Maximum lead temperature for soldering during 10 s. 260 C SMBJ5.0A-TR,CA-TR SMBJ188A-TR,CA-TR TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND OFF VOLTAGE RANGE : From 5V to 188V. UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 6 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC diode

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) STD2NM60 STD2NM60-1 N-CHANNEL 600V - 2.8Ω - 2A DPAK/IPAK Zener-Protected MDmesh Power MOSFET TYPE V DSS R DS(on) I D STD2NM60 STD2NM60-1 600V 600V TYPICAL R DS (on) = 2.8 Ω < 3.2 Ω < 3.2 Ω HIGH dv/dt AND

More information

ESDALCL6-4P6A. Multi-line low capacitance and low leakage current ESD protection. Features. Applications. Description

ESDALCL6-4P6A. Multi-line low capacitance and low leakage current ESD protection. Features. Applications. Description Multi-line low capacitance and low leakage current ESD protection Features Datasheet production data Diode array topology: 4 lines protection Low leakage current: 10 na at 3 V 1 na at 1 V Very low diode

More information

STB55NF06 STB55NF06-1 STP55NF06 STP55NF06FP

STB55NF06 STB55NF06-1 STP55NF06 STP55NF06FP STB55NF06 STB55NF06-1 STP55NF06 STP55NF06FP N-CHANNEL 60V - 0.015 Ω - 50A TO-220/TO-220FP/I ² PAK/D²PAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STP55NF06 STB55NF06-1 STB55NF06 STP55NF06FP 60 V

More information

STGP7NB60KD - STGB7NB60KD STGP7NB60KDFP N-CHANNEL 7A - 600V - TO-220/TO-220FP/D 2 PAK SHORT CIRCUIT RATED PowerMESH IGBT

STGP7NB60KD - STGB7NB60KD STGP7NB60KDFP N-CHANNEL 7A - 600V - TO-220/TO-220FP/D 2 PAK SHORT CIRCUIT RATED PowerMESH IGBT STGP7NB60KD - STGB7NB60KD STGP7NB60KDFP N-CHANNEL 7A - 600V - TO-220/TO-220FP/D 2 PAK SHORT CIRCUIT RATED PowerMESH IGBT TYPE V CES V CE(sat) I C STGP7NB60KD STGP7NB60KDFP STGB7NB60KD 600 V 600 V 600 V

More information

LCP03. Transient voltage suppressor for dual voltage SLIC. Features. Applications. Description

LCP03. Transient voltage suppressor for dual voltage SLIC. Features. Applications. Description LCP3 Transient voltage suppressor for dual voltage SLIC Features Datasheet production data Figure 1. Functional diagram TIP RING TIP RING SO-8 LCP3 GND GND Figure 2. Pin-out configuration GND GND Protection

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Lightning protection for LNB power supply Features 3 kv, 4 kv and 6 kv protection (8/20 µs) Axial & SMD package Unidirectional and low V F (V F = 1.2 V at I F = 3 A) Low clamping factor Fast response time

More information

HCF4066B QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS

HCF4066B QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS QUAD BILATERAL SWITCH FOR TRANSMISSION OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS 15V DIGITAL OR ± 7.5V PEAK TO PEAK SWITCHING 125Ω TYPICAL ON RESISTANCE FOR 15V OPERATION SWITCH ON RESISTANCE MATCHED

More information