Figure 1: AAT4712 Evaluation Board Picture.

Size: px
Start display at page:

Download "Figure 1: AAT4712 Evaluation Board Picture."

Transcription

1 Introduction EVALUATION BOARD DATA SHEET The AAT4712 is an integrated P-channel MOSFET load switch with adjustable current limits, integrated discharge paths, over-temperature protection, a power loop and a super capacitor charger. The input current limit control is combined with an over-temperature thermal limit and power loop circuit to provide a comprehensive system to protect the load switch and its supply from load conditions exceeding the supply specifications. A brief Getting Started section is included to help the user to begin operating the evaluation board. The AAT4712 evaluation board is shown in Figure 1; Figure 2 and Figure 8 depict the board schematic and layout. For additional information, please consult the AAT4712 product datasheet. Board Picture (a) Top Side (b) Bottom Side Figure 1: AAT4712 Evaluation Board Picture. 1

2 Schematic EVALUATION BOARD DATA SHEET VCC VCC RDY R SET 1.24M D1 LED R1 1.74k U1 AAT4712 RDY ISET N/C POK 16 GND 15 ADJ 14 VCC 13 VCC 12 OUT 11 OUT 10 D2 LED R2 1.74k C1 10µF R ADJ 18.2k POK GND VCC 8 OUT 9 OUT C2 10µF C3 22µF RB1 Super Cap RB2 Figure 2: AAT4712 Evaluation Board Schematic. Getting Started 1. Connect a DC power supply and a super capacitor or ultra capacitor to the AAT4712 evaluation board as shown in Figure 3. Set the DC power supply to 5V and the load to 0A. After power on, a current up to the current limit (2A set by R SET = 1.24M) charging the super capacitor can be observed by either current meter in the power supply or current probe of an oscilloscope. Figure 4 shows the start-up waveform of charging the super capacitor with softstart at 5V V CC. The operating voltage may vary from 2.5V to 5.5V. 2. After the power is on and the super capacitor is fully charged, the integrated discharge path management can be observed by decreasing the V CC with system load added. The AAT4712 integrates discharge path for (to system load) from the VCC input and OUT input (connect to super capacitor). After the power is on and the super capacitor is fully charged, the super capacitor is used as a backup power to support the system load for a short time when the input voltage drops below the power good detect (POK) threshold and the OUT pin voltage is greater than the V UVLO_OUT and voltage by turning on the OUT to switch discharge path and turning off the path of V CC to. The OUT to switch remains continuously on until the OUT pin voltage falls below V UVLO_OUT. 2

3 Figure 3: AAT4712 Evaluation Board Demonstration Connection. (a) Zoom in (b) Zoom out Figure 4: AAT4712 Start-up without System Load. 3

4 Figure 5 shows the dynamic process of the power path switching with V POK_TH = 4.5V, 0.5F super capacitor with 75mΩ ESR when V CC drops from 5V to 4V with 1A system load. D2 will be lighted when the OUT to path is turned on and the VCC to path is turned off. Figure 6 shows the waveform of the super capacitor supporting the system load as backup power when V CC is removed. The supporting time can be calculated using the following formula: T SUPPORT = (V DROP I OUT ESR SUPERCAP ) C SUPERCAP I OUT V DROP is the delta voltage when the super capacitor is active to support the system load and is equal to V CC minus V UVLO_OUT. For the condition as shown in Figure 6, the V DROP is 3V by V CC 5V minus V UVLO_OUT 2V. The supporting time can be calculated using the following equation. The calculation result is same as the measurement result. T SUPPORT = (3V - 1A 75mΩ) 0.5F 1A = 1.46 sec. Discharge path management by the AAT4712 can also be observed by observing the input current I CC, system load I, and super capacitor charge current I OUT. The input current is equal to the current plus the OUT charging current as shown in the formula below and if the load current increases/decreases, the OUT charging current will automatically decrease/increase accordingly via the device control loop. I CC = I + I OUT Figure 7 shows the measurement waveform when powering on the AAT4712 with 1A system load. Make sure the super capacitor is fully discharged before doing the measurement. Figure 5: AAT4712 Operating Waveform When V CC Drops from 5V to 4V with 1A System Load. Figure 6: AAT4712 Backup Time when 5V V CC is Removed with 1A System Load and 0.5F SuperCap. 4

5 Figure 7: AAT4712 Startup with 1A System Load. Current Limit and POK Setting The input current limit is programmed by by the R SET resistor from the I SET pin to ground in the range from 150mA to 2.4A. R SET can be calculated by: R SET = I LIM 1.6 Table 1 lists some 1% standard metal film resistor values for current limit settings. R SET (kω) Current Limit (A) Table 1: Recommended Current Limit R SET Values. 5

6 The POK detect threshold can be programmed by the external resistor R ADJ connected from the ADJ pin to GND. The R ADJ value can be calculated by: R ADJ = 60 V POK_TH Table 2 lists some 1% standard metal film resistor values for various V POK_TH settings. R ADJ (kω) V POK_TH (V) Table 2: Recommended Resistor Values for V POK_TH Setting. Printed Circuit Board (a) Top Layer (not to scale) (b) Bottom Layer (not to scale) Figure 8: AAT4712 Evaluation Board. 6

7 AAT4712 EVAL Component Listing EVALUATION BOARD DATA SHEET Component Part Number Description Manufacturer U1 AAT4712 Current Limited Switch with Capcitor Charger Skyworks R1,R2 RC0603FR-071K74L Res 1.74KΩ 1/10W 1% 0603 SMD R SET RC0603FR-071M24L Res 1.24MΩ 1/10W 1% 0603 SMD R ADJ RC0603FR-0718K2L Res 18.2KΩ 1/10W 1% 0603 SMD Yageo C1,C2 GRM21BR61C106K Cap Ceramic 10µF 0805 X5R 16V 10% C3 GRM21BR60J226M Cap Ceramic 22µF 0805 X5R 6.3V 20% D1, D2 0805KRCT Red LED 0805 HB SUPERCAP, RB1, RB2 Not populated Table 3: AAT4712 Evaluation Board Bill of Materials. Copyright 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ( Skyworks ) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, IN- CLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and Breakthrough Simplicity are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at are incorporated by reference. 7

EV-175 EVALUATION BOARD DATASHEET. AAT4712 EVAL: Power Path with Input Current Limit and Capacitor Charger. Introduction.

EV-175 EVALUATION BOARD DATASHEET. AAT4712 EVAL: Power Path with Input Current Limit and Capacitor Charger. Introduction. Introduction EVALUATION BOARD DATASHEET The AAT4712 is an integrated P-channel MOSFET load switch with adjustable current limits, integrated discharge path, over temperature protection, a power loop and

More information

Evaluation Board for the AAT High Efficiency Six-Channel, 1X/1.5X Charge Pump for White LED Applications

Evaluation Board for the AAT High Efficiency Six-Channel, 1X/1.5X Charge Pump for White LED Applications Introduction The AAT69- evaluation board demonstrates the functionality of the AAT69- and its application as a white LED driver under Skyworks' wire serial digital interface and/or interface control. The

More information

Evaluation Board for the AAT2868 CABC Compatible Four-Channel Backlight Driver with Dual LDO Regulators

Evaluation Board for the AAT2868 CABC Compatible Four-Channel Backlight Driver with Dual LDO Regulators Introduction EVALUATION BOARD DATA SHEET The AAT88 EVAL board demonstrates the functionality of the AAT88 and its application as a backlight driver with dual LDO outputs. The AAT88 is a low-noise, constant-frequency

More information

DATA SHEET AAT4712. Power Path with Input Current Limit and Capacitor Charger. Features. General Description. Applications. Typical Application V IO

DATA SHEET AAT4712. Power Path with Input Current Limit and Capacitor Charger. Features. General Description. Applications. Typical Application V IO General Description The is a programmed, current limited P-channel MOSFET power switch designed for high-side load-switching applications for SSD memory buffer saving solutions. With the programmed current

More information

Evaluation Board for the AAT2784 Three-Channel Step-down DC/DC Converter

Evaluation Board for the AAT2784 Three-Channel Step-down DC/DC Converter Introduction EVALUATION BOARD DATA SHEET EV57 The AAT2784 evaluation board provides a platform for test and evaluation of the AAT2784 -channel.8mhz step-down converter. The input voltages (V P ) of the

More information

Evaluation Board for the AAT1409/7/5 Eight/Six/Four-Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming

Evaluation Board for the AAT1409/7/5 Eight/Six/Four-Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming Introduction The AAT09/07/0 evaluation board provides a platform for evaluating the family of 8-channel / 6-channel / -channel LED backlight drivers. The PCB layout has been optimized for portable device

More information

Evaluation Board for the AAT1409/7/5 Eight/Six/Four-Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming

Evaluation Board for the AAT1409/7/5 Eight/Six/Four-Channel LED Backlight Driver with Integrated Boost and High Frequency Direct PWM Dimming Introduction The AAT09/07/0 evaluation board provides a platform for evaluating the family of 8-channel / 6-channel / -channel LED backlight drivers. The PCB layout has been optimized for portable device

More information

Figure 1: AAT1278 Evaluation Board Picture.

Figure 1: AAT1278 Evaluation Board Picture. Introduction EVALUATION BOARD DATA SHEET The AAT1278 evaluation board demonstrates the functionality of the AAT1278 and its application as LED photo flash driver under Skyworks' AS 2 Cwire serial digital

More information

SKY65120: WCDMA PA Bias Method For Lower Junction Temperature

SKY65120: WCDMA PA Bias Method For Lower Junction Temperature application note SKY6120: WCDMA PA Bias Method For Lower Junction Temperature Introduction This application note describes how SKY6120 may be used with reduced bias control to obtain better thermal performance.

More information

The AAT1451 evaluation board demonstrates the functionality of the AAT1451 and its application as a white LED driver under PWM control.

The AAT1451 evaluation board demonstrates the functionality of the AAT1451 and its application as a white LED driver under PWM control. Introduction The AAT141 evaluation board demonstrates the functionality of the AAT141 and its application as a white LED driver under PWM control. The AAT141 is a step-up LED driver with four-precision

More information

Features OUTA INA AAT4902 INB OUTB VLIM GND

Features OUTA INA AAT4902 INB OUTB VLIM GND General Description The is a member of Skyworks' Application Specific Power MOSFET (ASPM TM ) product family. It is a full-bridge, constant output voltage power stage operating with supply voltage range

More information

SMP LF: Surface Mount PIN Diode

SMP LF: Surface Mount PIN Diode DATA SHEET SMP1324-087LF: Surface Mount PIN Diode Applications Switches Attenuators Features Low-series resistance: 0.75 Ω maximum @ 50 ma Low total capacitance: 1.5 pf maximum @ 30 V Excellent thermal

More information

Evaluation Board for the AAT1210 High Power DC/DC Boost Converter

Evaluation Board for the AAT1210 High Power DC/DC Boost Converter Introduction The AAT0 evaluation board provides a platform for test and evaluation of the AAT0 switching boost regulator. The evaluation board demonstrates suggested size and placement of external components

More information

SMV LF and SMV LF: Surface Mount, 0402 Hyperabrupt Tuning Varactor Diodes

SMV LF and SMV LF: Surface Mount, 0402 Hyperabrupt Tuning Varactor Diodes DATA SHEET SMV1247-040LF and SMV1249-040LF: Surface Mount, 0402 Hyperabrupt Tuning Varactor Diodes Applications Wide bandwidth VCOs Wide voltage range, tuned phase shifters and filters Features High capacitance

More information

SMS : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode

SMS : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode DATA SHEET SMS7621-060: Surface Mount, 0201 Low-Barrier Silicon Schottky Diode Applications Sensitive detector circuits Sampling circuits Mixer circuits Features Low barrier height Suitable for use above

More information

SMP LF: Surface Mount PIN Diode

SMP LF: Surface Mount PIN Diode DATA SHEET SMP1345-087LF: Surface Mount PIN Diode Applications Switches Attenuators Features Low-series resistance: 2 Ω maximum @ 10 ma Low total capacitance: 0.2 pf maximum @ 5 V QFN (2 x 2 mm) package

More information

AS183-92/AS183-92LF: 300 khz-2.5 GHz phemt GaAs SPDT Switch

AS183-92/AS183-92LF: 300 khz-2.5 GHz phemt GaAs SPDT Switch DATA SHEET AS183-92/AS183-92LF: 300 khz-2.5 GHz phemt GaAs SPDT Switch Applications General purpose medium-power switches in telecommunication applications Transmit/receive switches in 802.11 b/g WLAN

More information

Zero Bias Silicon Schottky Barrier Detector Diodes

Zero Bias Silicon Schottky Barrier Detector Diodes DATA SHEET Zero Bias Silicon Schottky Barrier Detector Diodes Features High sensitivity Low video impedance Description Skyworks series of packaged, beam-lead and chip zero bias Schottky barrier detector

More information

SMS : 0201 Surface Mount Low Barrier Silicon Schottky Diode Anti-Parallel Pair

SMS : 0201 Surface Mount Low Barrier Silicon Schottky Diode Anti-Parallel Pair PRELIMINARY DATA SHEET SMS7621-092: 0201 Surface Mount Low Barrier Silicon Schottky Diode Anti-Parallel Pair Applications Sub-harmonic mixer circuits Frequency multiplication Features Low barrier height

More information

SKY LF: GaAs SP2T Switch for Ultra Wideband (UWB) 3 8 GHz

SKY LF: GaAs SP2T Switch for Ultra Wideband (UWB) 3 8 GHz DATA SHEET SKY1398-36LF: GaAs SPT Switch for Ultra Wideband (UWB) 3 8 GHz Features Positive voltage control (/1.8 V to /3.3 V) High isolation 5 for BG1, 5 for BG3 Low loss.7 typical for BG1,.9 for BG3

More information

Current Limited Load Switch General Description. Features OUT AAT4610 SET

Current Limited Load Switch General Description. Features OUT AAT4610 SET AAT General Description The AAT SmartSwitch is a current limited P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with inputs ranging from.7v to.v,

More information

SPD1101/SPD1102/SPD : Sampling Phase Detectors

SPD1101/SPD1102/SPD : Sampling Phase Detectors DATA SHEET SPD1101/SPD1102/SPD1103-111: Sampling Phase Detectors NOTE: These products have been discontinued. The Last Time Buy opportunity expires on 12 April 2010. Applications Phase-Locked Loops Phase-locked

More information

SKY LF: GHz SP3T Switch, 50 Ω Terminated

SKY LF: GHz SP3T Switch, 50 Ω Terminated DATA SHEET SKY13408-465LF: 1.0 6.0 GHz SP3T Switch, 50 Ω Terminated Applications WiMAX 802.16 Dual-band WLANs (802.11 a/b/g/n) LTE/4G systems WLAN 802.11a/c 5 GHz video distribution Features 50 Ω matched

More information

SKY LF: GHz Five-Bit Digital Attenuator (0.5 db LSB)

SKY LF: GHz Five-Bit Digital Attenuator (0.5 db LSB) DATA SHEET SKY12328-350LF: 0.5-4.0 GHz Five-Bit Digital Attenuator (0.5 LSB) Applications Transceiver transmit automatic level control or receive automatic gain control in WiMAX, GSM, CDMA, WCDMA, WLAN,

More information

SKY LF: GHz Two-Way, 0 Degrees Power Divider

SKY LF: GHz Two-Way, 0 Degrees Power Divider DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:

More information

Evaluation Board for the AAT2428 Sixteen-Channel White LED Driver Solutionwith LED Current and Timing Control

Evaluation Board for the AAT2428 Sixteen-Channel White LED Driver Solutionwith LED Current and Timing Control EV9 Evaluation Board for the AAT48 Introduction The AAT48 evaluation board is a hardware platform to evaluate the functions of the AAT48, a 6-channel white LED driver for LED current and timing control.

More information

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier DATA SHEET SKY67107-306LF: 2.3-2.8 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier Applications LTE cellular infrastructure and ISM band systems Ultra low-noise, high gain and high linearity

More information

AA103-72/-72LF: 10 MHz GHz GaAs One-Bit Digital Attenuator (10 db LSB)

AA103-72/-72LF: 10 MHz GHz GaAs One-Bit Digital Attenuator (10 db LSB) DATA SHEET AA103-72/-72LF: 10 MHz - 2.5 GHz GaAs One-Bit Digital Attenuator (10 LSB) Applications Cellular radio Wireless data systems WLL gain level control circuits Features Attenuation: 10 Single, positive

More information

AA104-73/-73LF: 300 khz-2.5 GHz One-Bit Digital Attenuator

AA104-73/-73LF: 300 khz-2.5 GHz One-Bit Digital Attenuator DATA SHEET AA104-73/-73LF: 300 khz-2.5 GHz One-Bit Digital Attenuator (32 ) Applications Sixth-bit value for Skyworks AA260-85 and AA101-80 digital attenuators IF and RF components for cable, GSM, PCS,

More information

PIN Diode Chips Supplied on Film Frame

PIN Diode Chips Supplied on Film Frame DATA SHEET PIN Diode Chips Supplied on Film Frame Applications Switches Attenuators Features Preferred device for module applications PIN diodes supplied are 00% tested, saw cut, and mounted on film frame

More information

SKY , SKY LF: SP3T Switch for Bluetooth and b, g

SKY , SKY LF: SP3T Switch for Bluetooth and b, g DATA SHEET SKY325-349, SKY325-349LF: SP3T Switch for Bluetooth and 82.b, g Applications 82.b, g Bluetooth Zigbee TDMA/GSM/EDGE CDMA/WCDMA Other short-range wireless applications Simplified Block Diagram

More information

SMV LF: Surface Mount, 0402 Silicon Hyperabrupt Tuning Varactor Diode

SMV LF: Surface Mount, 0402 Silicon Hyperabrupt Tuning Varactor Diode DATA SHEET SMV1232-040LF: Surface Mount, 0402 Silicon Hyperabrupt Tuning Varactor Diode Applications Wide bandwidth VCOs Wide range voltage-tuned phase shifters and filters Features Low series resistance:

More information

CLA LF: Surface Mount Limiter Diode

CLA LF: Surface Mount Limiter Diode DATA SHEET CLA4609-086LF: Surface Mount Limiter Diode Applications Low loss, high power limiters Receiver protectors Features Low thermal resistance: 25 C/W Typical threshold level: +36 dbm Low capacitance:

More information

SKY LF: MHz Low-Noise, Low-Current Amplifier

SKY LF: MHz Low-Noise, Low-Current Amplifier DATA SHEET SKY67013-396LF: 600-1500 MHz Low-Noise, Low-Current Amplifier Applications ISM band receivers General purpose LNAs Features Low NF: 0.85 db @ 900 MHz Gain: 14 db @ 900 MHz Flexible supply voltage

More information

Silicon Tuning Varactor Diodes in Hermetic Surface Mount Package

Silicon Tuning Varactor Diodes in Hermetic Surface Mount Package DATA SHEET Silicon Tuning Varactor Diodes in Hermetic Surface Mount Package Features Silicon abrupt and hyperabrupt tuning varactors available Hermetic ceramic package,.83 x.43 x.0 mm Very low parasitic

More information

AAT1451/05/07 SW VIN. Figure 1: Solution Structure for Multi-channel WLED Backlight in Li-ion Battery Application

AAT1451/05/07 SW VIN. Figure 1: Solution Structure for Multi-channel WLED Backlight in Li-ion Battery Application Introduction The white LED backlight is very popular in notebook, portable DVD/TV, ipad and similar applications. Larger display screens need greater number of WLEDs to meet their requirement of brightness.

More information

SKY LF: 20 MHz-2.7 GHz GaAs SPDT Switch

SKY LF: 20 MHz-2.7 GHz GaAs SPDT Switch DATA SHEET SKY13270-92LF: 20 MHz-2.7 GHz GaAs SPDT Switch Applications Transmit/receive and diversity switching over 3 W Analog and digital wireless communication systems including cellular, GSM, and UMTS

More information

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier DATA SHEET SKY67106-306LF: 1.5-3.0 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier Applications CDMA, WCDMA, TD-SCDMA, WiMAX, and LTE cellular infrastructure systems Ultra low-noise, high

More information

SKY LF: PHEMT GaAs IC SP3T Switch GHz

SKY LF: PHEMT GaAs IC SP3T Switch GHz DATA SHEET SKY1339-37LF: PHEMT GaAs IC SP3T Switch.1 3. GHz Features Positive low voltage control (/3 V) Low insertion loss (.5 db at.5 GHz) High isolation (5 db at.5 GHz) Simplified Block Diagram RF3

More information

SKY : GHz SP3T/SPDT Wire-Bondable GaAs Die

SKY : GHz SP3T/SPDT Wire-Bondable GaAs Die DATA SHEET SKY13434-002: 0.1 6.0 GHz SP3T/SPDT Wire-Bondable GaAs Die Applications 802.11 a/b/g/n/ac WLAN networks Embedded modules Features SP3T (2.5 GHz) and SPDT (5.0 GHz) switches with Bluetooth capability

More information

DME, DMF, DMJ Series: Silicon Beam-Lead Schottky Mixer Diode (Singles, Pairs, and Quads) Bondable Beam-Lead Devices

DME, DMF, DMJ Series: Silicon Beam-Lead Schottky Mixer Diode (Singles, Pairs, and Quads) Bondable Beam-Lead Devices DATA SHEET DME, DMF, DMJ Series: Silicon Beam-Lead Schottky Mixer Diode (Singles, Pairs, and Quads) Bondable Beam-Lead Devices Applications Microwave Integrated Circuits Mixers Detectors Features Low 1/f

More information

SMP1321 Series: Low Capacitance, Plastic Packaged PIN Diodes

SMP1321 Series: Low Capacitance, Plastic Packaged PIN Diodes DATA SHEET SMP1321 Series: Low Capacitance, Plastic Packaged PIN Diodes Applications High-performance wireless switches Features Capacitance: 0.18 pf typical @ 30 V Series resistance: 1.05 Ω typical @

More information

SKY LF: GHz High Linearity, Active Bias Low-Noise Amplifier

SKY LF: GHz High Linearity, Active Bias Low-Noise Amplifier DATA SHEET SKY67102-396LF: 2.0-3.0 GHz High Linearity, Active Bias Low-Noise Amplifier Applications CDMA, WCDMA, TD-SCDMA, WiMAX, and LTE cellular infrastructure Ultra low-noise systems Features Ultra

More information

SMS : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode

SMS : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode DATA SHEET SMS7621-060: Surface Mount, 0201 Low-Barrier Silicon Schottky Diode Applications Sensitive detector circuits Sampling circuits Mixer circuits Features Low barrier height Suitable for use above

More information

DATA SHEET SE2425U : 2.4 GHz Bluetooth Power Amplifier IC. Applications. Product Description. Features. Ordering Information

DATA SHEET SE2425U : 2.4 GHz Bluetooth Power Amplifier IC. Applications. Product Description. Features. Ordering Information Applications Bluetooth tm wireless technology (Class 1) USB dongles, PCMCIA, flash cards, Access Points Enhanced data rate Features Integrated input and inter-stage match +25 dbm GFSK Output Power +19.5

More information

SKY LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz

SKY LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz data sheet SKY13318-321LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz Features l Application 82.11a (5.2 5.8 GHz) and 82.11b, (2.4 GHz) diversity l Operating frequency LF 6 GHz l Positive low

More information

SMP1345 Series: Very Low Capacitance, Plastic Packaged Silicon PIN Diodes

SMP1345 Series: Very Low Capacitance, Plastic Packaged Silicon PIN Diodes DATA SHEET SMP1345 Series: Very Low Capacitance, Plastic Packaged Silicon PIN Diodes Applications High isolation LNBs, WLANs, and wireless switches Features Very low insertion loss: 0.4 db Capacitance:

More information

SMP1322 Series: Low Resistance, Plastic Packaged PIN Diodes

SMP1322 Series: Low Resistance, Plastic Packaged PIN Diodes DATA SHEET SMP1322 Series: Low Resistance, Plastic Packaged PIN Diodes Applications High-performance wireless switch applications Features Resistance: 0.8 Ω typical @ 1 ma Packages rated MSL1, 260 C per

More information

SMP LF: Surface Mount PIN Diode for High Power Switch Applications

SMP LF: Surface Mount PIN Diode for High Power Switch Applications DATA SHEET SMP1304-085LF: Surface Mount PIN Diode for High Power Switch Applications Applications Low loss, high power switches Low distortion attenuators Features Low-thermal resistance: 35 C/W Suitable

More information

AS LF: GaAs IC High-Isolation Positive Control SPDT Nonreflective Switch LF to 4 GHz

AS LF: GaAs IC High-Isolation Positive Control SPDT Nonreflective Switch LF to 4 GHz DATA SHEET AS186-32LF: GaAs IC High-Isolation Positive Control SPDT Nonreflective Switch LF to 4 GHz Applications GSM, PCS, WCDMA, 2.4 GHz ISM and 3.5 GHz wireless local loop V1 J2 Features Positive voltage

More information

AAT4610B DATA SHEET AAT4610B SOT23-5. Current Limited Load Switch. General Description. Features. Applications. Typical Application

AAT4610B DATA SHEET AAT4610B SOT23-5. Current Limited Load Switch. General Description. Features. Applications. Typical Application AATB General Description The AATB SmartSwitch is a current limited P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with inputs ranging from.v to.v,

More information

ACA2417: 1218 MHz CATV Push-Pull Driver Amplifier

ACA2417: 1218 MHz CATV Push-Pull Driver Amplifier DATA SHEET ACA2417: 1218 MHz CATV Push-Pull Driver Amplifier Applications DOCSIS and Euro DOCSIS 3.1 (D3.1) compliant downstream RF Pre-amplifier for node + 0 HFC and FTTC/FTTB networks Final stage amplifier

More information

ADA1200: Linear Amplifier

ADA1200: Linear Amplifier DATA SHEET ADA1200: Linear Amplifier Applications Low-noise amplifier for CATV set-top boxes CATV drop amplifier Features 12 db gain 50 to 1000 MHz frequency range Noise figure: 2.3 db Single +5 V supply

More information

SKY LF: GHz GaAs SPDT Switch

SKY LF: GHz GaAs SPDT Switch DATA SHEET SKY13321-36LF:.1-3. GHz GaAs SPDT Switch Applications Higher power applications with excellent linearity performance RFC WiMAX systems J2 J1 Features Positive voltage control ( to 1.8 V) High

More information

SMV LF: Hyperabrupt Junction Tuning Varactor

SMV LF: Hyperabrupt Junction Tuning Varactor DATA SHEET SMV1800-079LF: Hyperabrupt Junction Tuning Varactor Applications Satellite tuners VCOs Tuneable couplings Features Cross to NXP s BB181 Low series resistance High capacitance ratio Ultra-small

More information

Features IN1 OUT. System Load +3.3V IN2 IIN1 IIN2 SEL R IIN2. R IIN1 Enable EN GND

Features IN1 OUT. System Load +3.3V IN2 IIN1 IIN2 SEL R IIN2. R IIN1 Enable EN GND General Description The - is a member of Skyworks' Application Specific Power Management SmartSwitch family. This device is a dual input single output power supply selector switche designed to operate

More information

EV188 EVALUATION BOARD DATA SHEET

EV188 EVALUATION BOARD DATA SHEET Introduction The AAT2138 evaluation board demonstrates its functions and high precision current application as a 2.5A synchronous step-down converter with an integrated current-limited load switch. By

More information

SKY LF: GaAs Digital Attenuator 5-Bit, 1 db LSB 400 MHz 4 GHz

SKY LF: GaAs Digital Attenuator 5-Bit, 1 db LSB 400 MHz 4 GHz data sheet SKY12329-35LF: GaAs Digital Attenuator 5-Bit, 1 db LSB 4 MHz 4 GHz Applications l Transceiver transmit automatic level control or receive automatic gain control in WiMAX, GSM, CDMA, WCDMA, WLAN,

More information

ACA4789: 1218 MHz 25 db Gain CATV Power-Doubler Amplifier

ACA4789: 1218 MHz 25 db Gain CATV Power-Doubler Amplifier DATA SHEET ACA4789: 1218 MHz 25 Gain CATV Power-Doubler Amplifier Applications Advanced high-power, high-frequency HFC transmission systems Output power doubler for deep fiber node in CATV distribution

More information

SMS : 0201 Surface-Mount Low-Barrier Silicon Schottky Diode Anti-Parallel Pair

SMS : 0201 Surface-Mount Low-Barrier Silicon Schottky Diode Anti-Parallel Pair DATA SHEET SMS7621-092: 0201 Surface-Mount Low-Barrier Silicon Schottky Diode Anti-Parallel Pair Applications Sub-harmonic mixer circuits Frequency multiplication Features Low barrier height Suitable for

More information

SKY : 5 GHz Low-Noise Amplifier

SKY : 5 GHz Low-Noise Amplifier DATA SHEET SKY6544-31: 5 GHz Low-Noise Amplifier Applications V_ENABLE VCC 82.11a/n/ac radios 5 GHz ISM radios Smartphones Bias Notebooks, netbooks, and tablets Access points, routers, and gateways RF_IN

More information

SKY LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated

SKY LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated DATA SHEET SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch, 50 Ω Terminated Applications WiMAX 802.16 Dual-band WLANs (802.11 a/b/g/n) LTE/4G systems Features RF1 50 Ω 50 Ω RF2 50 Ω matched RF ports in all

More information

SKY LF: GHz Five-Bit Digital Attenuator with Serial-to-Parallel Driver (0.5 db LSB)

SKY LF: GHz Five-Bit Digital Attenuator with Serial-to-Parallel Driver (0.5 db LSB) DATA SHEET SKY12345-362LF: 0.7-4.0 GHz Five-Bit Digital Attenuator with Serial-to-Parallel Driver (0.5 LSB) Applications Base stations Wireless and RF data Wireless local loop gain control circuits Features

More information

Ultra-Low-Noise Amplifiers

Ultra-Low-Noise Amplifiers WHITE PAPER Ultra-Low-Noise Amplifiers By Stephen Moreschi and Jody Skeen This white paper describes the performance and characteristics of two new ultra-low-noise LNAs from Skyworks. Topics include techniques

More information

OLF400: Low-Input Current Hermetic Surface Mount Optocoupler

OLF400: Low-Input Current Hermetic Surface Mount Optocoupler DATA SHEET OLF400: Low-Input Current Hermetic Surface Mount Optocoupler Features Hermetic SMT package Electrical parameters guaranteed over -55 C to +125 C ambient temperature range 1000 VDC electrical

More information

SMP1302 Series: Switch and Attenuator Plastic Packaged PIN Diodes

SMP1302 Series: Switch and Attenuator Plastic Packaged PIN Diodes DATA SHEET SMP1302 Series: Switch and Attenuator Plastic Packaged PIN Diodes Applications TV distribution and cellular base stations High volume switch and attenuators Features Designed for base station

More information

SKY LF: 10 MHz GHz Six-Bit Digital Attenuator with Driver (0.5 db LSB, 31.5 db Range)

SKY LF: 10 MHz GHz Six-Bit Digital Attenuator with Driver (0.5 db LSB, 31.5 db Range) DATA SHEET SKY12353-470LF: 10 MHz - 1.0 GHz Six-Bit Digital Attenuator with Driver (0.5 db LSB, 31.5 db Range) Applications Cellular base stations Wireless data transceivers Broadband systems Features

More information

SMP1307 Series: Very Low Distortion Attenuator Plastic Packaged PIN Diodes

SMP1307 Series: Very Low Distortion Attenuator Plastic Packaged PIN Diodes DATA SHEET SMP1307 Series: Very Low Distortion Attenuator Plastic Packaged PIN Diodes Applications Very low distortion Pi and TEE attenuators Cable TV AGC High-volume wireless systems Features Low distortion

More information

SKY LF: GHz Five-Bit Digital Attenuator (1 db LSB)

SKY LF: GHz Five-Bit Digital Attenuator (1 db LSB) DATA SHEET SKY12323-303LF: 0.5-3.0 GHz Five-Bit Digital Attenuator (1 db LSB) Applications Transceiver transmit automatic level control or receive automatic gain control in GSM, CDMA, WCDMA, WLAN, Bluetooth,

More information

SKY LF: 20 MHz to 6.0 GHz GaAs SPDT Switch

SKY LF: 20 MHz to 6.0 GHz GaAs SPDT Switch DATA SHEET SKY13351-378LF: 2 MHz to 6. GHz GaAs SPDT Switch Applications WLAN 82.11 a/b/g/n networks WLAN repeaters INPUT ISM band radios Low power transmit receive systems OUTPUT1 OUTPUT2 Features Positive

More information

Why VPEAK is the Most Critical Aperture Tuner Parameter

Why VPEAK is the Most Critical Aperture Tuner Parameter APPLICATION NOTE Why VPEAK is the Most Critical Aperture Tuner Parameter VPEAK and Voltage Handling: Selecting an Aperture Tuner with Insufficient VPEAK May Result in Degraded TRP, TIS and Phone Certification

More information

SKY LF: Low Noise Amplifier Operation

SKY LF: Low Noise Amplifier Operation application note SKY655-372LF: Low Noise Amplifier Operation Introduction The SKY655-372LF is a high performance, low noise, n-channel, depletion mode phemt, fabricated from Skyworks advanced phemt process

More information

SMS : Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode

SMS : Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode DATA SHEET SMS7630-061: Surface Mount, 0201 Zero Bias Silicon Schottky Detector Diode Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High volume wireless systems

More information

SKY LF: GHz Seven-Bit Digital Attenuator with Serial and Parallel Drivers

SKY LF: GHz Seven-Bit Digital Attenuator with Serial and Parallel Drivers DATA SHEET SKY12343-364LF: 0.01 4.0 GHz Seven-Bit Digital Attenuator with Serial and Parallel Drivers Applications Cellular and 3G infrastructure WiMAX, LTE, 4G infrastructure Features Broadband operation:

More information

SKY LF: GHz High Linearity, Active Bias Low-Noise Amplifier

SKY LF: GHz High Linearity, Active Bias Low-Noise Amplifier PRELIMINARY DATA SHEET SKY671-396LF: 1.7-2. GHz High Linearity, Active Bias Low-Noise Amplifier Applications GSM, CDMA, WCDMA, and TD-SCDMA cellular infrastructure Ultra low-noise systems Features Ultra

More information

SKY : Direct Quadrature Demodulator GHz Featuring No-Pull LO Architecture

SKY : Direct Quadrature Demodulator GHz Featuring No-Pull LO Architecture PRELIMINARY DATA SHEET SKY73013-306: Direct Quadrature Demodulator 4.9 5.925 GHz Featuring No-Pull LO Architecture Applications WiMAX, WLAN receivers UNII Band OFDM receivers RFID, DSRC applications Proprietary

More information

SKY LF: 0.1 to 6.0 GHz GaAs SPDT Switch

SKY LF: 0.1 to 6.0 GHz GaAs SPDT Switch DATA SHEET SKY13320-374LF: 0.1 to 6.0 GHz GaAs SPDT Switch Applications Two-way radios WiMAX WLANs J2 J1 Features Broadband frequency range: 0.1 to 6.0 GHz Low insertion loss: 0.5 @ 2.4 GHz High isolation:

More information

SKY LF: 40 MHz to 1 GHz Broadband 75 Ω CATV Low-Noise Amplifier with Bypass Mode

SKY LF: 40 MHz to 1 GHz Broadband 75 Ω CATV Low-Noise Amplifier with Bypass Mode DATA SHEET SKY65450-92LF: 40 MHz to 1 GHz Broadband 75 Ω CATV Low-Noise Amplifier with Bypass Mode Applications Terrestrial and cable set-top box Cable modem Home gateway Personal video recorder (PVR)

More information

SKY LF: GHz 40 W High Power Silicon PIN Diode SPDT Switch

SKY LF: GHz 40 W High Power Silicon PIN Diode SPDT Switch DATA SHEET SKY12209-478LF: 0.9-4.0 GHz 40 W High Power Silicon PIN Diode SPDT Switch Applications Transmit/receive switching and RF path switching in TD-SCDMA, WiMAX, and LTE base stations Transmit/receive

More information

Features. Reverse Blocking OUT. Over-Temp. Loop. Current Limit Control. GND SuperCap RHYS

Features. Reverse Blocking OUT. Over-Temp. Loop. Current Limit Control. GND SuperCap RHYS General Description The SmartSwitch is a current limited P-channel MOSFET power switch designed for high-side loadswitching applications in PCMCIA GSM/GPRS/3G modem cards. Used in conjunction with a super

More information

SKY : MHz Variable Gain Amplifier

SKY : MHz Variable Gain Amplifier DATA SHEET SKY65387-11: 2110-2170 MHz Variable Gain Amplifier Applications WCDMA base stations Femto cells Features Frequency range: 2110 to 2170 MHz High gain: >30 db Attenuation range: > 35 db OP1dB:

More information

SKY LF: MHz Low-Noise Power Amplifier Driver

SKY LF: MHz Low-Noise Power Amplifier Driver DATA SHEET SKY65095-360LF: 1600-2100 MHz Low-Noise Power Amplifier Driver Applications 2.5G, 3G, 4G wireless infrastructure transceivers ISM band transmitters WCS fixed wireless 3GPP LTE Features Wideband

More information

SKY LF: GHz SP10T Switch with GPIO Interface

SKY LF: GHz SP10T Switch with GPIO Interface PRELIMINARY DATA SHEET SKY13404-466LF: 0.4-2.7 GHz SP10T Switch with GPIO Interface Applications 2G/3G multimode cellular handsets (UMTS, CDMA2000, EDGE, GSM) Embedded data cards Features Broadband frequency

More information

SMSA : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode

SMSA : Surface Mount, 0201 Low-Barrier Silicon Schottky Diode DATA SHEET SMSA7621-060: Surface Mount, 0201 Low-Barrier Silicon Schottky Diode Automotive Applications 24 GHz and 77 GHz collision avoidance 2.4 GHz and 5.8 GHz WiFi detector Infotainment Navigation Garage

More information

SKY LF: 300 khz 3 GHz Medium Power GaAs SPDT Switch

SKY LF: 300 khz 3 GHz Medium Power GaAs SPDT Switch DATA SHEET SKY13268-344LF: 3 khz 3 GHz Medium Power GaAs SPDT Switch Applications Transceiver transmit-receive switching in GSM, CDMA, WCDMA, WLAN, Bluetooth, Zigbee, land mobile radio base stations or

More information

SKY LF: 0.02 to 4.0 GHz High Isolation SP4T Absorptive Switch with Decoder

SKY LF: 0.02 to 4.0 GHz High Isolation SP4T Absorptive Switch with Decoder DATA SHEET SKY13392-359LF:.2 to 4. GHz High Isolation SP4T Absorptive Switch with Decoder Applications GSM/CDMA/WCDMA/LTE cellular infrastructure Test and measurement systems Military communications Features

More information

Figure 1: AAT2469/AAT2499 Evaluation Board Picture.

Figure 1: AAT2469/AAT2499 Evaluation Board Picture. Introduction EVALUATION BOARD DATA SHEET The AAT246/AAT24 evaluation board is a hardware platform to evaluate the functions of the AAT246 and AAT24 devices. The AAT246 is a dedicated TVLite TM control

More information

OLH5730/5731: Hermetic Low Input Current, Dual-Channel Optocouplers

OLH5730/5731: Hermetic Low Input Current, Dual-Channel Optocouplers 9DATA SHEET OLH7/731: Hermetic Low Input Current, Dual-Channel Optocouplers Features Rugged and reliable hermetic Dual Inline Package (DIP) Performance guaranteed over full military temperature range High

More information

Surface Mount Mixer and Detector Schottky Diodes

Surface Mount Mixer and Detector Schottky Diodes DATA SHEET Surface Mount Mixer and Detector Schottky Diodes Applications Sensitive RF and microwave detector circuits Sampling and mixer circuits High-volume wireless WiFi and mobile Low-noise receivers

More information

ACA1216: 1218 MHz CATV MMIC Power Doubler

ACA1216: 1218 MHz CATV MMIC Power Doubler DATA SHEET ACA1216: 1218 MHz CATV MMIC Power Doubler Features 1218 MHz specified performance 12 V MMIC power doubler with 28 db gain Very low distortion Best-in-class input/output match 20 db typical Low

More information

SKY : 2.4 GHz Transmit/Receive Front-End Module

SKY : 2.4 GHz Transmit/Receive Front-End Module DATA SHEET SKY65337-11: 2.4 GHz Transmit/Receive Front-End Module Applications 2.4 GHz ISM band radios ZigBee FEMs IEEE 802.15.4 applications Features Transmit output power > +20 dbm Bidirectional path

More information

SKY LF: 20 MHz-6.0 GHz GaAs SP4T Switch

SKY LF: 20 MHz-6.0 GHz GaAs SP4T Switch DATA SHEET SKY13322-375LF: 2 MHz-6. GHz GaAs SP4T Switch Applications Multiband telecommunications up to 6 GHz Features Broadband frequency range: 2 MHz to 6. GHz Low insertion loss:.45 @ 1 GHz Very high

More information

ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier

ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier DATA SHEET ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier Applications Advanced high-power, high-frequency HFC transmission systems Output power doubler for deep fiber node in CATV distribution

More information

ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier

ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier DATA SHEET ACA2431: 1218 MHz High-Output GaN CATV Power-Doubler Amplifier Applications Advanced high-power, high-frequency HFC transmission systems Output power doubler for deep fiber node in CATV distribution

More information

AS LF: PHEMT GaAs IC 1 W Low-Loss 0.1 to 6 GHz SPDT Switch

AS LF: PHEMT GaAs IC 1 W Low-Loss 0.1 to 6 GHz SPDT Switch DATA SHEET AS225-313LF: PHEMT GaAs IC 1 W Low-Loss 0.1 to 6 GHz SPDT Switch Applications INPUT WLAN 802.11a/b/g Features OUTPUT1 OUTPUT2 Positive low voltage control (0/3 V) Low insertion loss (0.6, 0.1

More information

Applications. Product Description. Features. Ordering Information. Functional Block Diagram

Applications. Product Description. Features. Ordering Information. Functional Block Diagram Applications DSSS 5 GHz WLAN (IEEE802.11a) Access Points, PCMCIA, PC cards Features High output power amplifier 19.5dBm Only 1 external component required Integrated power amplifier enable pin (VEN) Buffered,

More information

AWB7138: 791 to 821 MHz Small-Cell Power Amplifier Module

AWB7138: 791 to 821 MHz Small-Cell Power Amplifier Module DATA SHEET AWB7138: 791 to 821 MHz Small-Cell Power Amplifier Module Applications LTE, WCDMA and HSDPA air interfaces Picocell, femtocell, home nodes Customer premises equipment Data cards and terminals

More information

SKY LF: MHz Quadrature Modulator

SKY LF: MHz Quadrature Modulator DATA SHEET SKY73077-459LF: 1500-2700 Quadrature Modulator Applications Cellular base station systems: GSM/EDGE, CDMA2000, W-CDMA, TD-SCDMA, LTE WiMAX/broadband wireless access systems Satellite modems

More information

SKY : 5 GHz Low-Noise Amplifier

SKY : 5 GHz Low-Noise Amplifier DATA SHEET SKY6544-31: 5 GHz Low-Noise Amplifier Applications _ENABLE CC 82.11a/n/ac radios 5 GHz ISM radios Smartphones Bias Notebooks, netbooks, and tablets Access points, routers, and gateways RF_IN

More information

SKY LF: 20 MHz-5 GHz, 7 W SPDT Switch

SKY LF: 20 MHz-5 GHz, 7 W SPDT Switch DATA SHEET SKY13299-321LF: 2 MHz-5 GHz, 7 W SPDT Switch Applications RFC WiMAX and WLAN systems Features VCTL1 J1 VCTL2 J2 Positive voltage operation: /3 to /5 V Low insertion loss:.5 typical @ 3.5 GHz

More information