SMI. Strip Measurement Inductive. maintenance-free self regulating reliable

Transcription

1 SMI Strip Measurement Inductive maintenance-free self regulating reliable

2 SMI Strip Measurement Inductive Operating principle: The inductive strip centre sensor SMI (Strip Measurement Inductive) is based on electromagnetic induction. Two strip centre sensors are arranged on each strip edge at right angles to the strip pass direction in such a way that the strip moves centrally between the strip centre sensors. The strip centre sensor arranged below the strip is the receiver, and the sensor arranged above the strip is the emitter. The electronic unit SMI2.11 x feeds the emitters with a sinusoidal alternating voltage with controlled frequency and amplitude. On each emitter coil, a distinctive electromagnetic alternating field is formed and directed towards the opposite receiver. The receivers detect a different intensity, depending on the position of the strip. The alternating voltages induced in this manner provide analogue output signals for the strip edge position by evaluating the frequency-dependent amplitude. The inductive strip sensing system contains complex self-test facilities. The individual signals are combined into the cumulative signals sensing system OK and strip detected. In addition to the proven performance features maintenance-freedom and stability the new modular sensor design as well as the improved symmetry characteristics of the sensor family SMI offer a better centre measurement accuracy as well as various possibilities to achieve your individual demands. Since it is unsusceptible to disruptive exterior influences from the outside, even non-magnetic materials such as aluminium, copper, brass and austenitic chrome nickel steels (e.g ) are also reliably sensed with the inductive measurement process. SMI-SE: Standard measuring frame SMI-HE: High precision strip centering control EMG Automation GmbH specialises in the automation of continuous production processes in the metal, paper and plastics industries as well as in the foil and tyre industries. The company, which was established in 1946, is a leading provider of electro hydraulic control systems. Furthermore, EMG provides quality assurance systems for the manufacturing industry. Based on the combination of more than 70 years of experience, the quality of our products and complete solutions as well as our advisory skills, our customer, by his trust, makes us the market leader. In close co-operation with our customers, research facilities and universities we are permanently searching for innovative solutions to promote our new and further developments and therefore to design and form the market as innovation leader actively. SMI-SE: Strip centre guiding system for operation at normal ambient temperatures. Compact measuring frame with integrated evaluation electronics. Optional supply of 30 m lead cable for remote mounting of the evalutation electronics. SMI-SE / 150 +/- 2 mm 300 mm SMI-SE / 300 +/- 2 mm 600 mm SMI-SE / 500 +/- 3 mm 1000 mm SMI-SE / 750 +/- 3 mm 1500 mm SMI-SE / 900 +/- 5 mm 1800 mm

3 maintenance-free SMI-HE: High precision strip centre guiding system for operation at normal ambient temperatures. Compact measuring frame with integrated evaluation electronics. Optional supply of 30 m lead cable for remote mounting of the evalutation electronics. SMI-HE / 150 +/- 1 mm 300 mm SMI-HE / 300 +/- 1 mm 600 mm SMI-HE / 500 +/- 1 mm 1000 mm SMI-HE / 750 +/- 1 mm 1500 mm SMI-HE / 900 +/- 3 mm 1800 mm self-regulating SMI-LE: Strip centre guiding system for use at a normal ambient temperature, with frame reinforcements for enhanced mechanical requirements, such as on a loop carriage. Compact measuring frame with integrated evaluation electronics. Optional supply of 30 m lead cable for remote mounting of the evalutation electronics. SMI-LE / 500 +/- 3 mm 1000 mm SMI-LE / 750 +/- 3 mm 1500 mm SMI-LE / 900 +/- 5 mm 1800 mm IMR: Strip centering control in humid environment SMI3: Strip centering control for temperatures up to 130 C IMR: Strip centre guiding system for use in an aggressive and humid environment such as in strip pickling or cleaning lines with fluid temperatures of up to 80 C. Four encapsulated measuring coils of tubular design, which are inserted (by the customer) into non-metallic sheathing tubes which are resistant to the agent, and which are installed across the treatment tank above and below the strip. SMI3: Strip centre guiding system for strip temperatures of up to 300 C and to not exceed at sensor a maximum of 130 C. Compact measuring frame with thermal insulation, separate evaluation electronics. IMR-SR / 300 +/- 5 mm 550 mm IMR-SR / 500 +/- 5 mm 950 mm IMR-SR / 800 +/- 5 mm 1550 mm SMI3-SR / 400 +/- 5 mm 600 mm SMI3-SR / 600 +/- 5 mm 1050 mm SMI3-SR / 800 +/- 5 mm 1450 mm

4 reliable Customer's benefits: Wide application range from 0.05 mm to 16 mm thickness (others on request) EMG consultancy for all kinds of steering guide applications in steel processing lines Sensors are impervious to changing insulation resistance due to dust accumulation on the measuring equipment disturbance of the static field, e. g. in the case of inspection tours by the line staff water, steam and metallic fumes produced during treatment scale and metal-containing dust produced during machining ionising furnace atmospheres durable Options: All SMI sensors available with separate evaluation electronics for remote mounting outside the process line Supply of customised mounting supports on request Supply of various sensors with ex-proof certificate for use in explosive areas Design and supply of non metallic sheathing tubes for IMR sensors on request Optional design, engineering or supply of mechanical protection supports for all kinds of inductive sensors IGS: Inductive fork-type sensor for strip edge sensing EMI / EKI: High precision strip centering and edge sensing IGS: Strip edge sensor for metal strip in areas where liquids with temperatures of up to 80 C are sprayed or for metal strip with a projecting protective film at a measuring accuracy of +/- 1 mm. Encapsulated sensor (fork shaped) in a plastic housing, protection type IP 67, with a 50 mm sensor opening 120 mm sensor depth. The evaluation electronics is separated from the IGS sensor. EMI / EKI: EMI: High-precision strip centre guiding system for operation at normal ambient temperatures with a measuring accuracy of +/- 1 mm. An optional output of the strip width is possible with an accuracy of +/- 1.5 mm*. EKI: For strip edge guiding systems at a normal ambient temperature with a measuring accuracy of +/- 1 mm*. *Generally speaking, this level of accuracy can only be achieved with a constant strip thickness, material type and pass line! The compact measuring frame, which consists of anodised extruded aluminium profiles, is equipped with mobile inductive sensors on both strip edges that are driven by electric motors. The two sensors above and below the strip are mechanically coupled at the side via a synchronising shaft and they follow the strip edges in rigid position control loops. The corresponding positions are continuously detected via integrated position sensors. The strip position is calculated from these positions and the extent of sensor coverage.

5 Sensor overview SMI-SE SMI-HE Solutions for Inductive Strip Measurement IMR SMI3 IGS EMI / EKI Further information about solutions for inductive and radar-based strip measurement is available in separate brochures:

6 Automation GmbH Industriestraße Wenden Germany Phone: Fax: automation@emg-automation.com Group The Best of German Engineering.moving ahead. Das Lexikon des deutschen Maschinenbaus aufgenommen: EMG / A-M / EN / Strip Measurement Inductive / Revision 05 / / Printed in Germany / Subject to modification