New Eagle PWM to Analog Converter
|
|
- Maurice McCarthy
- 6 years ago
- Views:
Transcription
1 New Eagle P.O. Box #272 Ann Arbor, MI Phone Fax M E C H A T R O N I C C O N T R O L S O L U T I O N S New Eagle PWM to Analog Converter Revision 0.2 PWM-AN Last Update: 9/8/2014 New Eagle 3588 Plymouth Road, #272 Ann Arbor, MI (voice) (fax)
2 Features 0-5V analog output that is proportional to PWM duty cycle useful for controllers that cannot read duty cycle (i.e. PWM signals) 3 separate channels Safety feature allows a second input signal (e.g. OEM pedal signal) to pass thru to output if the control module generating PWM signal freezes, shuts down, or loses connection. reverse polarity and ESD protection Wide operating voltage range: 8V 20V Closed Loop Feedback Control Software Library available for improved accuracy Works with Low Side Drive inputs; does not require TTL inputs Description The New Eagle PWM to Analog Converter converts PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs but no analog outputs. Safety Pulse Feature The safety pulse feature is intended for vehicle pedal applications. This feature ensures that the original pedal signal (i.e the analog signal from the actual pedal) will pass thru the PWM to Analog box to the OEM ECU unimpeded in the event that the External Control Module (ECM) freezes or loses power. If no oscillating signal is present at this input pin, the Pass Thru signals (Pins 5, 6, & 7 of the grey connector) will be routed through the box to the output pins (Pins 9, 10, 11 of the grey connector). If the New Eagle PWM to Analog Converter loses power, then its output will default to the Pass Thru signals as well. If the Safety Pulse Feature is not desired, then Pins 10,11,12 of the black connector should be used to read the analog signal(s). These pins will always output an analog signal, regardless of whether a safety pulse is present. Closed Loop Feedback Control Software Library Accuracy is heavily dependent on the design of the particular low side drive. If accuracy is required, close loop feedback is recommended. New Eagle offers a Feedback Control Software library that allows end users to accurately convert PWM signals into analog signals. New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 2
3 Application Examples Vehicle Pedal Emulation The New Eagle PWM to Analog Converter allows an external control module to command the pedal signal going into the OEM ECU. Control over the pedal signal is a highly desirable feature in dual fuel vehicle conversions, for example. Should the external control module fail or lose power, the safety pulse feature ensures that the original pedal signal (i.e the analog signal from the actual pedal) will pass thru the PWM to Analog box to the OEM ECU unimpeded. The safety pulse feature can also be used to enable and disable pedal interception at any time if the designer so chooses. Aftermarket ECM New Eagle PWM to Analog PWM Output 1 PWM Output 2 PWM Output 3 PWM Signals PWM Input 1 Analog output 1 PWM Input 2 Analog output 2 PWM Input 3 Analog output 3 Foot Pedal Safety Pulse output Safety Pulse Signal Analog Signals OEM ECU Safety Pulse Input Pass Thru 1 Pass Thru 2 Pass Thru 3 Analog signal 1 Analog signal 2 Analog signal 3 Analog Pedal Input 1 Analog Pedal Input 2 Analog Pedal Input 3 Analog Signals Electric Vehicle Conversion One customer has used the New Eagle PWM to Analog Converter in an electric vehicle conversion project. The customer desired to use the OEM fuel gauge on the instrument cluster to display battery State of Charge. The fuel gauge input required an analog signal and the EV control module did not have any analog output channels. The New Eagle PWM to Analog Converter was used to translate a PWM signal (originating from the EV control module) into an analog signal that the fuel gauge could read. ECM New Eagle PWM to Analog Battery SOC PWM Output PWM Signal PWM Input 1 Analog output 1 Analog Signal New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 3
4 Absolute Maximum Ratings Parameter Min Nom Max Units Supply Voltage 25 V Storage Temperature* C Analog Output Source Current (per channel) <30 ma *These values have not been tested; however according to the specifications for all of the board components, the PWM to Analog board should be able to operate under these conditions. Operating Ratings Parameter Conditions Min Nom Max Units Supply Voltage V Operating Temperature C Total Current Draw 45 ma PWM Input Signal Frequency 1,000 Hz Safety Pulse Frequency Safety Pulse Duty Cycle safety pulse duty cycle = 50% safety pulse frequency=1000hz 100 1,000 10,000 Hz % PWM to Analog Open Loop Offset Error 2 3 % Open Loop Rise Time 3 10% to 90% 160 ms Open Loop Fall Time 3 90% to 10% 155 ms Closed Loop Rise Time 3 10% to 90% 80 ms Closed Loop Fall Time 3 90% to 10% 80 ms 1These values have not been tested; however according to the specifications for all of the board components, the PWM to Analog board should be able to operate under these conditions. 2Open Loop Accuracy is not guaranteed and heavily dependent on the design of the particular low side drive. If accuracy is required, close loop feedback is recommended. 3Within 1% of steady state value New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 4
5 Dynamic Response Open and Closed Loop Response from 90% to 10% Setpoint Open Loop Response Closed Loop Respone 70 Duty Cycle(%) time (s) 100 Open and Closed Loop Response from 10% to 90% Duty Cycle(%) Setpoint 10 Open Loop Response Closed Loop Respone time (s) New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 5
6 Connections LEFT Connector* RIGHT Connector* Pin I/O Name Description 1 Battery Voltage 2 Input PWM 1 3 Input PWM 2 4 Input PWM 3 5 Input Pass Thru 1 6 Input Pass Thru 2 7 Input Pass Thru 3 8 Input Safety Pulse 9 Output Analog 3 10 Output Analog 2 11 Output Analog 1 Connects to positive lead of battery with 12V Nominal Voltage PWM signals from an external control module. Note that these inputs are designed to be driven by a Low Side Drives. The signals entering pins 5, 6, & 7 will be passed thru to output pins 11, 10, 9, respectively, when a safety pulse signal is no longer detected on Pin Ground Connects to chassis ground Analog 1 8 Analog 2 9 Analog 3 10 Analog Bypass 1 11 Analog Bypass Hz square wave signal sent from an external control module. If the input to pin 8 is not oscillating (e.g. frozen external control module, broken wire, etc.), then signals going into pins 5, 6, & 7 will be passed thru to output pins 11,10, 9, respectively. Note that this input is designed to be driven by a Low Side Drive. Pins 9, 10, & 11 output 0V-5V analog signals that are proportional to the duty cycle of the PWM signal going into this pins 4, 3, and 2, respectively. Not Used Same as Pin 11 on Grey Connector; used for closed loop feedback; OPTIONAL Same as Pin 10 on Grey Connector; used for closed loop feedback; OPTIONAL Same as Pin 9 on Grey Connector; used for closed loop feedback; OPTIONAL channels bypasses relay, used if pass thru signal was not needed 12 Analog Bypass 3 *When looking towards the connectors from outside the enclosure. Left connector is grey. Right connector is black. New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 6
7 Physical Characteristics Parameter Value Units Overall Length 5.24 (133.03) in (mm) Overall Height 1.42 (36.00) in (mm) Overall Width 4.68 (118.8) in (mm) Total Weight (0.213) lb (kg) New Eagle 3588 Plymouth Rd. #272 Ann Arbor, MI (voice) (fax) 7
New Eagle PWM to Analog Converter
New Eagle P.O. Box #272 Ann Arbor, MI 48105-2603 Phone 734.395.2112 Fax 928.395.2114 M E C H A T R O N I C C O N T R O L S O L U T I O N S New Eagle PWM to Analog Converter Revision 0.2 PWM2AN-012-1301
More informationNew Eagle J1772 Vehicle Power Interface Module (VPIM)
New Eagle P.O. Box #272 Ann Arbor, MI 48105-2603 Phone 734.395.2112 Fax 928.395.2114 New Eagle J1772 Vehicle Power Interface Module (VPIM) Revision 0.8 VPIM-024-1301 8/5/2013 New Eagle 3588 Plymouth Road,
More informationP/N: AX Applications: Off-highway construction equipment Municipal vehicles. Ordering Part Numbers:
Features: Command messages are received through the CAN network (no physical inputs) 10 universal outputs of up to 2.5A are user selectable from the following types (up to a maximum of 7A of controller
More informationP/N: AX TECHNICAL DATASHEET #TDAX Single Input, Dual Output Valve Controller 1 Universal Input, +5V reference CAN (SAE J1939)
TECHNICAL DATASHEET #TDAX022000 Single Input, Dual Output Valve Controller 1 Universal Input, +5V reference (SAE J1939) Features: 1 universal signal input 2 proportional or on/off outputs up to 3 A User
More informationProgrammable with Electronic Assistant Simulink
TECHNICAL DATASHEET #TDAX022410 2 Universal Inputs, Dual Valve Controller 2 Universal Signal Inputs 2-3A Outputs Drive Hydraulic Valves CAN (SAE J1939) Programmable with Electronic Assistant Simulink P/N:
More informationApplications: Power generation, Cogeneration, Stationary power Large engines
Features: 8 inputs are user selectable from the following. 0-5V, 0-10V, 4-20 ma or 0-20 ma Digital inputs for interface to switches, etc. PWM signal, pulse or 16-bit counter inputs from sensors or diesel
More informationTECHNICAL DATASHEET #TDAX INPUTS, 5 OUTPUTS VALVE CONTROLLER
TECHNICAL DATASHEET #TDAX020510 6 INPUTS, 5 OUTPUTS VALVE CONTROLLER Up to 6 Digital, Analog or PWM Command Inputs 5 Independent Proportional or On/Off Outputs 1 +5V, 100 ma Reference Voltage CAN (SAE
More informationTECHNICAL DATASHEET #TDAX A DC MOTOR CONTROLLER P/N: AX Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging
TECHNICAL DATASHEET #TDAX102000 35A DC MOTOR CONTROLLER P/N: AX102000 Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging with Electronic Assistant Features: Unidirectional or bi-directional
More informationOrdering Part Numbers: SAE J1939 version Controller: AX022400
TECHNICAL DATASHEET #TDAX022400 2 Universal Inputs, Dual Valve Controller 2 Universal Inputs 2-3A Outputs CAN (SAE J1939) Programmable with Electronic Assistant P/N: AX022400 Features: 2 universal signal
More informationwith Electronic Assistant
Description: The quad valve controller provides precise, repeatable control of 4 proportional solenoids and 1 on/off solenoid over a SAE J1939 network. PWM signal inputs or analog voltage or current inputs
More informationApplications: Off-highway construction equipment Municipal vehicles Material handling equipment (forklifts, etc.) Ordering Part Numbers:
TECHNICAL DATASHEET #TDAX021201 CAN to 9 Output Valve Controller P/N: AX021201 CANopen Features: Command messages are received through the CAN network (no physical inputs) 9 outputs are user selectable
More informationTECHNICAL DATASHEET #TDAX Universal Signal Inputs CAN Controller V, ma, Digital, PWM, Hz/RPM, Counter Inputs CANopen P/N: AX030121
TECHNICAL DATASHEET #TDAX030121 10 Universal Signal Inputs CAN Controller V, ma, Digital, PWM, Hz/RPM, Counter Inputs CANopen Features: 10 user selectable signal inputs: o 0-5 V o 0-10 V o 0-20 ma o 4-20
More informationwith Electronic Assistant
TECHNICAL DATASHEET #TDAX021300 Valve Controller 6 On/Off P/N: AX021300 2 Analog and 3 Frequency Command Inputs 6 On/Off Outputs (Option: PWM) CAN (SAE J1939) with Electronic Assistant Features: 2 user
More informationTECHNICAL DATASHEET #TDAX CAN SAE J1939, Dual Output Valve Controller
TECHNICAL DATASHEET #TDAX020200 CAN SAE J1939, Dual Output Valve Controller Features: Two independent, software controlled outputs selectable as: Proportional Current (up to 2.5A); Hotshot Digital; PWM
More informationTECHNICAL DATASHEET #TDAX ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER
Preliminary TECHNICAL DATASHEET TDAX130540 ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER 2 Analog (Bipolar), Resistive, Digital, Frequency (RPM) or PWM Signal Inputs Encoder Input Magnetic Pick Up Input
More informationApplications: oil and gas equipment automation; off-highway machine automation; agricultural equipment
Features: 6 Universal Signal Inputs are user configurable as: o 0-5V, 0-10V, 4-20mA or 0-20mA o 20Ω to 250 kω Resistive o 1 Hz to 10 khz PWM o Digital o Three of the inputs can be configured as a pulse
More informationTECHNICAL DATASHEET #TDAX022420
TECHNICAL DATASHEET TDAX022420 Four Inputs, Two Outputs Universal Valve Controller 2 Universal Signal Inputs, Magnetic Pick Up Sensor, or Encoder Inputs 2-3A High Side, Low Side or Half-bridge Outputs
More informationTECHNICAL DATASHEET #TDAX INPUT, 12 OUTPUT VALVE CONTROLLER,
TECHNICAL DATASHEET #TDAX020400 12 INPUT, 12 OUTPUT VALVE CONTROLLER, Multi-functional 7 Signal and 5 Digital Inputs 8-2.5A Proportional and 4-3A On/Off Outputs 1 +5V, 100 ma Reference Voltage CAN (SAE
More informationTECHNICAL DATASHEET #TDAX Universal Input, Single Output Valve Controller CAN (SAE J1939)
Features: TECHNICAL DATASHEET #TDAX021610 Universal Input, Single Output Valve Controller CAN (SAE J1939) 1 universal signal input (voltage, current, resistive, PWM, frequency or digital) 1 output: proportional
More informationGenerator Speed Controller Model GSC 1
enerator Speed Controller odel SC 1 RA 29 977/09.95 Replaces: 4.92 Self contained controller for driving electrical power generators with a hydrostatic transmission 16 Bit microprocessor based controller
More informationPRELIMINARY. Preliminary TECHNICAL DATASHEET #TDAX DC MOTOR CONTROLLER P/N: AX100650
Preliminary TECHNICAL DATASHEET #TDAX100650 DC MOTOR CONTROLLER P/N: AX100650 Variable Speed Control, Onboard Inputs 6A DC Motor Output, 2.5A Proportional Output, 2 Signal Outputs CAN SAE J1939, Rugged
More informationTECHNICAL DATASHEET #TDAX QUAD VALVE CONTROLLER P/N: AX SERIES
TECHNICAL DATASHEET #TDAX020500 QUAD VALVE CONTROLLER P/N: AX020500 SERIES Multiple Digital, Analog or PWM Command Inputs 4 Independent Proportional Outputs and 1 On/Off Output Standard Open Loop Control
More information500mA Laser Diode Controller
IP500 500mA Laser Diode Controller Operating Manual THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 300-3600 Newton, NJ 07860 USA www.thorlabs.com Table of Contents TABLE OF FIGURES 1 OVERVIEW
More informationUSB-UT350(T) Portable Ultrasonic Pulser/Receiver and Analog to Digital Converter. User s Guide
USB-UT350(T) Portable Ultrasonic Pulser/Receiver and Analog to Digital Converter User s Guide 2000-2009 US Ultratek, Inc. Revision 1.77 September 30, 2009 US Ultratek, Inc. 4070 Nelson Ave., Suite B Concord,
More informationB25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation
B25A20FAC Series B25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation FEATURES: All connections on front of amplifier Surface-mount technology Small size, low cost,
More informationISO 9001 CERTIFIED. 607 NW 27th Ave Ocala, FL Phone: (352) or Fax: (352) OPERATION MANUAL
ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 ES-Key 12 PDM module (4 selectable polarity outputs) with 4 Inputs (selectable polarity) and 4 MFI Inputs P/N 610-00035 PAGE
More informationCIC ENGINEERING 345 CENTER STREET EAST PEORIA, IL PH FAX
Micro Multi-Purpose Input Simulator (MPIS) CIC P/N: umpis µmpis Overview The µmpis test box is a general-purpose test box that generates signals used to control the inputs of an electronic control module
More informationRev.8 03/08 SSRMAN-1P SERIES USERS MANUAL SSR INTELLIGENT PHASE ANGLE CONTROL MODULE COPYRIGHT 2008 NUWAVE TECHNOLOGIES, INC.
Rev.8 03/08 MAN-1P SERIES USERS MANUAL INTELLIGENT PHASE ANGLE MODULE COPYRIGHT 2008 MAN-1P Users Manual Page 2 TABLE OF CONTENTS 1. Ordering Codes... 2 2. Description... 2 2.1 Features... 3 3. Installation...
More informationP/N: AX Applications: Typical applications can include: test stands; and industrial automation.
Description: The universal motor controller, 100W, drives a brushed DC Motor up to 6A or a 3- phase BLDC motor up to 6A. It features two SAE J1939 ports. Interfacing with 12V or 24Vdc power, the controller
More informationCoils & Electronic Controls
HYDRAFORCE Coils & Electronic Controls COILS FOR SOLENOID OPERATED VALVES Standard Coils and Proportional Valve Coils... 3.200.1 Series E Water/Weather Resistant Coils... 3.400.1 ELECTRONIC CONTROLS FOR
More informationTECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR OEM DISTRIBUTION ONLY TECHNICAL PRODUCT DATASHEET High Density PDM 21 Output / 10
More informationTECHNICAL DATASHEET #TDAX021901
TECHNICAL DATASHEET #TDAX021901 8 In, 5 Output Valve Controller 6 Universal Analog Inputs, 1 Digital Input 1 Magnetic Pickup Sensor Input 4-2.5A Proportional or On/Off Outputs 1-2.5A Digital Output CANopen
More informationMTS Automation P R O D U C T S P E C I F I C A T I O N. MaxPlus Digital Servo Drive. MP-FLX 230 Series. MP-FLX 230 Series. Single- and Dual-Axis
P R O D U C T S P E C I F I C A T I O N MaxPlus Digital Servo Drive MP-FL 230 Series MP-FL 230 Series Single- and Dual-Axis At two times the standard industry speed for digital current loop update rates,
More informationTECHNICAL DATASHEET #TDAX INPUTS, 2 BIDIRECTIONAL
TECHNICAL DATASHEET TDAX024010 4 INPUTS, 2 BIDIRECTIONAL 10-400 ma OUTPUTS VALVE CONTROLLER, DIN rail mount Four Signal Inputs Two Bi-directional 10-400 ma Outputs One Reference Voltage Isolated CAN (SAE
More informationAnalog amplifier RA. RE Edition: Replaces:
Analog amplifier RA RE 950 Edition: 08.05 Replaces: 0.006 For control of simple functions of electrohydraulic components Two power outputs (PWM) and one switching output Each output has a separately adjustable
More informationAmetek, Inc. Rotron Technical Products Division. 100 East Erie St., Suite 200 Kent, Ohio User's Guide. Number Revision F
Ametek, Inc. Rotron Technical Products Division 100 East Erie St., Suite 200 Kent, Ohio 44240 User's 120 Volt, 800 Watt and 240 Volt, 1200 Watt Brushless Motor Drive Electronics 5.7" (145 mm) and 7.2"
More informationPrecision Voltage Control System
1.800.61.8754 Precision Voltage Control System The PVCS is a driver controller module with many powerful features that can be easily programmed for use with many applications such as speed and directional
More informationRelay Driver Overview and Applications
Relay Driver Overview and Applications Describes Basic and Advanced Settings for common and alternative/novel uses for the Relay driver (RD-1). Morningstar s Relay Driver (RD-1) is a fully programmable
More informationDeluxe ECM Speed Controller. ECMDX Series MANUAL INSTALLATION + SERVICE
MANUAL INSTALLATION + SERVICE Deluxe ECM Speed Controller ECMDX Series Revision #: 01 Issue Date: 03/11/14 2014 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview General...1
More informationOptions & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
More informationThe rangefinder can be configured using an I2C machine interface. Settings control the
Detailed Register Definitions The rangefinder can be configured using an I2C machine interface. Settings control the acquisition and processing of ranging data. The I2C interface supports a transfer rate
More informationElectronic Amplifier Model VT 3017 and VT 3018 (Series 3X) for the control of proportional directional valves, without positional feedback
RA 29 939/06.98 Electronic Amplifier Model T 301 and T 3018 (Series 3X) for the control of proportional directional valves, without positional feedback RA 29 939/06.98 Replaces: 09.94 Electronic amplifier
More informationSixPac Series of SCR AC Controller and DC Converters
SixPac Series of SCR AC Controller and DC Converters Complete Series of SCR Three-Phase Power Control Units Features Include: Compact, rugged construction Applications include: Windmill Converters Motor
More informationRev /13 SSRMAN-1B SERIES USERS MANUAL SSR INTELLIGENT BURST FIRING CONTROL COPYRIGHT 2013 NUWAVE TECHNOLOGIES, INC.
Rev.2.2 12/13 MAN-1B SERIES USERS MANUAL INTELLIGENT BURST FIRING CONTROL COPYRIGHT 2013 MAN-1B Users Manual Page 2 TABLE OF CONTENTS 1. Ordering Codes... 2 2. Description... 2 2.1 Features... 3 3. Installation
More informationDMC-8 (SKU#ROB )
DMC-8 (SKU#ROB-01-007) Selectable serial or parallel interface Use with Microcontroller or PC Controls 2 DC motors For 5 24 Volt Motors 8 Amps per channel Windows software included Fuse protection Dual
More informationElectronically Commutated (EC) Motor Control with Solo, Select and Sync PWM Boards
Electronically Commutated (EC) Motor Control with Solo, Select and Sync PWM Boards The Solo, Select and Sync PWM boards provide a pulse-width modulated (PWM) signal to the EC motor to control fan speed.
More informationAUTOMOTIVE CURRENT TRANSDUCER HAB 60-S/SP5
AUOMOIVE CURREN RANSDUCER HAB 60-S/SP5 Introduction he HAB Family is best suited for DC, AC or pulsed currents measurement in high power and low voltage automotive applications. It s contains galvanic
More informationPenny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272
Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272 No-Contact Hall-effect technology Wear-Free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or
More informationTECHNICAL DATASHEET #TDAX032100
Preliminary TECHNICAL DATASHEET TDAX032100 2 Bipolar Analog/Digital and 8 Universal Signal Inputs Controller CAN (SAE J1939), Ethernet Two +5V references DIN rail mount P/N: AX032100 Features: SAE J1939
More informationMSK4310 Demonstration
MSK4310 Demonstration The MSK4310 3 Phase DC Brushless Speed Controller hybrid is a complete closed loop velocity mode controller for driving a brushless motor. It requires no external velocity feedback
More informationOptions & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
More informationMIC2245. Features. General Description. Applications. Typical Application. 4MHz PWM Synchronous Buck Regulator with LDO Standby Mode
4MHz PWM Synchronous Buck Regulator with LDO Standby Mode General Description The Micrel is a high efficiency 4MHz pulse width modulated (PWM) synchronous buck (stepdown) regulator that features a LOWQ
More informationAnalog Amplifier RA. RE / /12 replaces: RE RE RE RE Technical Data Sheet
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Analog Amplifier RA RE 95 230/03.06 1/12 replaces: RE 95 022 RE 95 023 RE 29 874 RE 29 875 Technical Data
More informationVariable Speed Brushed DC Motor Drive
The driving force of motor control & electronics cooling. Equinox: Variable Speed Brushed DC Motor Drive Navigator Equinox The Equinox variable speed brushed DC motor drive with Navigator Programmer is
More informationdmx2pwm 9 channel dimmer setup manual
dmx2pwm 9 channel dimmer setup manual www.ecue.de dmx2pwm 9ch dimmer - setup manual e:cue control GmbH An OSRAM Company Rev. 1.2_06/2009 dmx2pwm 9ch dimmer - setup manual table of contents 1. Device Overview....................................
More informationMAE3. Absolute Magnetic Kit Encoder Page 1 of 8. Description. Mechanical Drawing. Features
Description MAE3 Page 1 of 8 The MAE3 is an absolute magnetic kit encoder that provides shaft position information over 360 of rotation with no stops or gaps. This magnetic encoder is designed to easily
More informationHypex Electronics BV Kattegat JP Groningen, The Netherlands
Hypex Electronics BV Kattegat 8 9723 JP Groningen, The Netherlands +31 50 526 4993 sales@hypex.nl www.hypex.nl High Efficiency Power Amplifier Module (OEM Version) Highlights Flat, fully load-independent
More informationMAE3. Absolute Magnetic Kit Encoder Page 1 of 9. Description. Features EH-1009.pdf
Page 1 of 9 Description The is an absolute magnetic kit encoder that provides shaft position information over 360 of rotation with no stops or gaps. This magnetic encoder is designed to easily mount to,
More informationDVC700 Series Programmable System Controller
Programmed with HCT s Intella Software Suite 23 I/O (14 inputs & 9 outputs), 2 CAN interfaces Supply voltage 9-30Vdc The is a robust programmable controller for solenoid-operated proportional valves. It
More informationSTEPPING MOTOR EMULATION
OPERATING MANUAL SERIES SMTBD1 OPTIONAL FUNCTIONS (Version 2.0) European version 2.0 STEPPING MOTOR EMULATION OPTION C This manual describes the option "C" of the SMT-BD1 amplifier: Stepping motor emulation.
More informationAutomotive Sensor Simulator. Automotive sensor simulator. Operating manual. AutoSim
Automotive sensor simulator Operating manual AutoSim Contents Introduction.. page 3 Technical specifications.... page 4 Typical application of AutoSim simulator..... page 4 Device appearance... page 5
More informationTF Electronics Throttle Controller
TF Electronics Throttle Controller Software Installation: Double click on TFEsetup.exe file to start installation. After installation there will be a shortcut on your desktop. Connecting the USB cable
More informationroject work presentation
roject work presentation roject Title: roject Index: 122 Microcontroller based power controller for an Electric Vehicle. y: Eric Bulimo Ubaga F17/1451/2011 upervisor: xaminer: Mr. C. Ombura. Dr. Dharma.
More informationSPEED SENSORS SIGNAL CONDITIONERS. Standard & Custom Sensors, Signal Conditioners and Interface Electronics
for INNOVATIVE SENSOR SOLUTIONS Standard & Custom Sensors, Signal Conditioners and Interface Electronics SPEED SENSORS Magnetic Speed Sensors (Active & Passive) Hall Effect Speed Sensors, GBR (Zero Speed)
More informationMIC3385. General Description. Features. Applications. Typical Application. 8MHz Inductorless Buck Regulator with LDO Standby Mode
8MHz Inductorless Buck Regulator with LDO Standby Mode General Description The Micrel is a high efficiency inductorless buck regulator that features a LOWQ LDO standby mode that draws only 18µA of quiescent
More informationEffective: June, 2000 EX-1821 Satellite Display Unit Receiver Installation Manual Models: 4643-*-* 4644-*-9 Since 1937
Effective: June, 2000 LevelPRO Satellite Display Unit Receiver Installation Manual Models: 4643-*-* 4644-*-9 Since 1937 The information contained in this manual was accurate at the time of release. Specifications
More informationSTARTER / GENERATOR MOTOR CONTROLLER
MIL-PRF-38534 AND 38535 CERTIFIED FACILITY M.S.KENNEDY CORP. STARTER / GENERATOR MOTOR CONTROLLER 4413 (315) 701-6751 FEATURES: 28V/160A Brushless DC motor control capability. 28V/90A Synchronous Boost
More informationA Model-Based Development Environment and Its Application in Engine Control
A Model-Based Development Environment and Its Application in Engine Control Shugang Jiang, Michael Smith, Charles Halasz A&D Technology Inc. ABSTRACT To meet the ever increasing requirements for engine
More informationElectronic amplifier for the control of proportional valves without position control Model VT 3006, Series 3X H/A 4240/94 VT X
Electronic amplifier for the control of proportional valves without position control Model T 3006, Series 3X RA 29 926/06.98 Replaces: 02.96 The amplifier T 3006-3X is suitable for the control of pilot
More informationAnacon Power & Controls
2254 Main Street, Concord, MA 01742-3829 Tel: 800-466-9080 978-287-0715 Fax: 978-287-0952 www.anaconpower.com sales@anaconusa.com SCR Power Controllers Zero Cross Time Based / Burst Fire C - SCR (Burst)
More informationCG-503 OPERATION MANUAL
CG-503 GROUND CONTINUITY TESTER OPERATION MANUAL REVISION 1.0 FILE:CG-503-E PN:800-04002 2000/7/13 CG-503 GROUND CONTINUITY TESTER 1. Introduction 3 2. Specifications 4 3. Panel Function Overview 5 4.
More information24/48V Fan Driver/Controller With High-Side Drive
24/48V Fan Driver/Controller With High-Side Drive Features High-side drive allows use of tachs Direct interface to host controller Noise-immune linear speed control 4-bit digital speed control Operates
More informationOVEN INDUSTRIES, INC. Model 5C7-362
OVEN INDUSTRIES, INC. OPERATING MANUAL Model 5C7-362 THERMOELECTRIC MODULE TEMPERATURE CONTROLLER TABLE OF CONTENTS Features... 1 Description... 2 Block Diagram... 3 RS232 Communications Connections...
More informationAdvanced Monolithic Systems
Advanced Monolithic Systems FEATURES 5V Version Available* Output Current of 1mA Very Low Quiescent Current Reverse Battery Protection Input-output Differential less than.6v Short Circuit protection Internal
More information2/2 way Proportional Valve (motordriven)
2/2 way Proportional (motordriven) Actuator isolated from fl ow path Excellent range and fast response times Low power consumption Orifi ce sizes 8 to 25 mm Versions: Standard, positioner, process controller
More informationModel 805 PWM Proportional Valve / Solenoid Driver with Peak and Hold Control Modes
Applied Processor and Measurement, Inc. FEATURES Model 805 PWM Proportional Valve / Solenoid Driver with Peak and Hold Control Modes Proportional Valve Driver with PWM output 3.5A max proportional control,
More informationOBSOLETE. Charge Pump Regulator for Color TFT Panel ADM8830
FEATURES 3 Output Voltages (+5.1 V, +15.3 V, 10.2 V) from One 3 V Input Supply Power Efficiency Optimized for Use with TFT in Mobile Phones Low Quiescent Current Low Shutdown Current (
More informationFeatures V OUT C BYP. Ultra-Low-Noise Regulator Application
MIC525 MIC525 5mA Low-Noise LDO Regulator Final Information General Description The MIC525 is an efficient linear voltage regulator with ultralow-noise output, very low dropout voltage (typically 7mV at
More informationPRELIMINARY AVB250A060 PRELIMINARY. Servo Drive. Peak Current (10 seconds)
Description Power Range The servo amplifiers are designed to drive brushless DC motors at a high switching frequency for vehicle applications. t is fully protected against over-voltage, over-current, over-heating,
More informationElectronic amplifier for the control of proportional valves without position control Model VT 3024, Series 3X H/A 4149/94 VT X
RA 29 934/0.98 Electronic amplifier for the control of proportional valves without position control Model T 3024, Series 3X RA 29 934/2.9 The amplifier T 3024-3X is suitable for the control of pilot operated
More information2 GHz to 6 GHz, 500 W Power Amplifier HMC8113
Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)
More informationPHOENIX CONTACT - 03/2007
Inline Function Terminal for Pulse Width Modulation and Frequency Modulation N AUTOMATIONWORX Data Sheet 6920_en_01 1 Description PHOENIX CONTACT - 03/2007 $ ' ) The terminal is designed for use within
More informationXC4e PWM Digital Drive
PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Amplifiers/Drives Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety
More informationTC LV-Series Temperature Controllers V1.01
TC LV-Series Temperature Controllers V1.01 Electron Dynamics Ltd, Kingsbury House, Kingsbury Road, Bevois Valley, Southampton, SO14 OJT Tel: +44 (0) 2380 480 800 Fax: +44 (0) 2380 480 801 e-mail support@electrondynamics.co.uk
More informationEBS MULTIDRIVE - STUDIO EDITION USERS MANUAL
EBS MULTIDRIVE - STUDIO EDITION USERS MANUAL USERS MANUAL EBS MULTIDRIVE - STUDIO EDITION THANK YOU FOR PURCHASING THE EBS MULTIDRIVE - STUDIO EDITION PEDAL! The EBS MultiDrive is an ultra compact and
More informationAnalog Servo Drive 25A20DD
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAdvanced Regulating Pulse Width Modulators
Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with
More informationThe outputs can also be programmed as 0-5 Vdc, 0-10 Vdc, 0-20 ma, 4-20 ma, Frequency, RPM, PWM or digital on/off signals.
TECHNICAL DATASHEET #TDAX130521 ECONOMY DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER 2 Analog, Resistive, Digital, Frequency (RPM) or PWM Signal Inputs 2 Analog, Digital, Frequency or PWM Signal Outputs +5V
More informationMIC4812. Features. General Description. Applications. Typical Application
High Current 6 Channel Linear WLED Driver with DAM and Ultra Fast PWM Control General Description The is a high efficiency linear White LED (WLED) driver designed to drive up to six high current WLEDs
More informationECE 511: FINAL PROJECT REPORT GROUP 7 MSP430 TANK
ECE 511: FINAL PROJECT REPORT GROUP 7 MSP430 TANK Team Members: Andrew Blanford Matthew Drummond Krishnaveni Das Dheeraj Reddy 1 Abstract: The goal of the project was to build an interactive and mobile
More informationEBS MULTICOMP - GUITAR EDITION USERS MANUAL
EBS MULTICOMP - GUITAR EDITION USERS MANUAL USERS MANUAL EBS MULTICOMP - GUITAR EDITION THANK YOU FOR PURCHASING THE EBS MULTICOMP - GUITAR EDITION PEDAL! EBS MultiComp is a high performance, analog compressor
More informationOwner s Manual S10 SERIES ELECTRONIC STEP CONTROLLER WITH VERNIER CONTROL
Owner s Manual S10 SERIES ELECTRONIC STEP CONTROLLER WITH VERNIER CONTROL This manual covers installation, setup, operation and troubleshooting. Read carefully before attempting to install, operate or
More informationAnacon Power & Controls Relay Assembly Specialists An Anacon Electronic Sales, Inc. Company
ZERO CROSS SSR CONTROLLER USERS MANUAL SSR INTELLIGENT POWER CONTROL MODULE TABLE OF CONTENTS Section Page 1 Ordering Code... 3 2 Description... 3 2.1 Features... 3 3 Installation... 3 3.1 Mounting Instructions...
More informationFEATURES APPLICATION
DESCRIPTION The is a Boost LED driver for driving up to 39 LEDs (3-series and 13-parallel) from a 5V system rail. The uses current mode, fixed frequency architecture to regulate the LED current, which
More informationFEBFAN3240_001NDA FEBFAN3241_001NDA Evaluation Boards. FAN324x Smart Dual-Coil Relay Driver Evaluation Board
User Guide for FEBFAN3240_001NDA FEBFAN3241_001NDA Evaluation Boards FAN324x Smart Dual-Coil Relay Driver Evaluation Board Featured Fairchild Products: FAN3240, FAN3241 (FAN324x) Direct questions or comments
More informationT150C / T151C Configurator
T150C / T151C Configurator Customer Name: Machine Name\Model Number: Revision Number: Please note revision history details on last page for updates to existing configurators. Date: Contact Name: Contact
More informationHigh-Efficiency, 40V White LED Driver with Dimming Control
High-Efficiency, 40V White LED Driver with Dimming Control Description The is a step-up DC/DC converter specifically designed for driving WLEDs with a constant current. The can drive up 10 white LEDs in
More informationDA 20 Technical Specification
1/18 DA 2 DA 2-6-255 DA 2-12-2515 DA 2-3-253 2/18 Content 1. General Description... 3 2. Operating Data... 4 2.1. Operating Data 6V-Versions... 4 2.2. Operating Data 12V-Version... 5 2.3. Operating Data
More informationPulse Generation. Pulsout. 555 Timer. Software version of pulse generation Pulsout pin, Period
Lecture 9 Pulse Generation Pulsout Software version of pulse generation Pulsout pin, Period Pin: specified I/O pin from 0 to 15 Period: 2 µsec per each unit 555 Timer Hardware version of pulse generation
More informationSA60. H-Bridge Motor Driver/Amplifiers SA60
H-Bridge Motor Driver/Amplifiers FEATURES LOW COSOMPLETE H-BRIDGE SELF-CONTAINED SMART LOWSIDE/ HIGHSIDE DRIVE CIRCUITRY WIDE SUPPLY RANGE: UP TO 8V A CONTINUOUS OUTPUT ISOLATED CASE ALLOWS DIRECT HEATSINKING
More information