62xxH Series Galvanometer Scanners
|
|
|
- Russell Goodman
- 6 years ago
- Views:
Transcription
1 Product Highlights Our popular xxh Series of closed loop, galvanometer-based scanners is consistently the industry s leading solution for high-performance laser beam steering. Each motor combines our moving magnet actuator technology with a position detector only available from Cambridge Technology. This patented technology features stable positioning while achieving the fastest scan speeds available in its category. Whether your focus is on speed, accuracy, or footprint, the xxh Series delivers both performance and value. Attain high-performance and reliability for your value-driven application Industry s fastest motor speeds deliver maximum throughput with long-term reliability High-accuracy output across a diverse range of application scanning needs Robust design supports consistent stability over long product lifetimes Footprint of compact models ensures ease of integration for small spaces Available with a wide range of mirrors sizes ( to 0 mm) and coating options
2 Product Specifications Recommended Aperture Size (mm) Wavelength Options Maximum Scan Angle (degrees) Rotor Inertia (gm cm, ±0%) Torque Constant (dyne cm/amp, ±0%) Maximum Rotor Temperature ( C) Thermal Resistance (Rotor to Case) ( C/watt, maximum) Coil Resistance (ohms, ±0%) Coil Inductance (μh, ±0%) Back EMF Voltage (μv/ /sec, ±0%) RMS Current (A at Tcase = 0 C, maximum) Peak Current (A, maximum) Small Angle Step Response (typical) 00H 0H H 0H 0H H 0H 0H 0H to to to to 0 to to to to 0 to 00 nm / nm / 00 nm - 00 nm / 9. μm - 0. μm Broadband Coatings: 0 nm μm x0.9x0.x0.x0.x0.x0.0x0.0x0.x mm Y mirror mm Y mirror 0 mm Y mirror mm Y mirror 0 mm Y mirror (Be) 0 μs 00 μs 0 μs 00 μs 0 μs 0 μs 0 μs.0 ms. ms Weight (grams, typical) Position Detector (specifications common across all models) Linearity 99.9% minimum, over 0 99.% typical, over 0 Scale Drift 0 ppm/ C, maximum Zero Drift μrad/ C, maximum Repeatability, Short-Term μrad Output Signal, Common Mode μa minimum with AGC current of 0 ma Output Signal, Differential Mode µa/ C (±.%) at common mode current of µa Output Signal, Common Mode to Differential Mode Ratio. (±.%) All angles are in mechanical degrees, unless otherwise noted. All specifications are subject to change without notice. Reference:. 0. step and settled to within 99% of the final position. Requires Cambridge Technology servo board.
3 00H Galvanometers.. 9 REF.. Ia Ib DC CATH AN S M- M+. Ø Ø. Ø SLOT TO./. DP.. REF...0. REF. 0H Galvanometers... REF..0. Ia Ib DC CATH AN S M- M+ Ø Ø SLOT.0 TO./. DP.. REF.... REF
4 H Galvanometers... REF..0. Ia Ib DC CATH AN S M- M+ Ø Ø. Ø REF REF.. SLOT.0 TO./. DP. 0H Galvanometers.. Ø REF.... Ø.00.9 Ø..0. Ø. REF.
5 0H Galvanometers H Galvanometers. REF Ø REF. Ø.9.9 CABLE LENGTH ( STD. LENGTH 0 ±. ) Ø.0 9. OVER SCREW HEAD.
6 0H Galvanometers VIEW FROM CONNECTOR END REF. P P P Ø.0 Ø.99.9 STD. LENGTH CABLE 0 ±. 9 REF. Ø.99.9 P SCALE : 0H Galvanometers Ø 0.90 ±0.0 Ø 0. SCREW HEAD CLEARANCE P Ø Ø CABLE LENGTH 0. ±. STD. P CONNECTOR END VIEW SCALE :.
7 0HA Galvanometers.... REF. VIEW FROM CONNECTOR END SCALE : Ø 0. Ø P P 9.9 REF. Ø STD. LENGTH CABLE 0 ±. P Reference:. 0HA model shown with the A connector type. Additional connector options are available for all models. About Cambridge Technology With close to 0 years of expertise, Cambridge Technology designs, develops, and manufactures innovative beam steering solutions including polygon- and galvanometer-based optical scanning components, -axis and -axis scan heads, scanning subsystems, high power scanning heads, and controlling hardware and software. We excel in collaborating with our key OEM partners to engineer products that meet their needs from the largest engineering solution to the smallest component. Key market applications include advanced industrial processes like additive manufacturing, laser converting, laser marking, and via-hole drilling, and medical applications such as laser treatment and optical coherence tomography. Cambridge Technology is a Novanta company. CAMBRIDGE TECHNOLOGY: AMERICAS + () 00 support-us@cambridgetechnology.com CAMBRIDGE TECHNOLOGY: EMEA +9 (0)9 0 0 support-eu@cambridgetechnology.com CAMBRIDGE TECHNOLOGY: JAPAN & KOREA + () support-jp@cambridgetechnology.com CAMBRIDGE TECHNOLOGY: CHINA, SINGAPORE, MALAYSIA, THAILAND & INDONESIA + () -00 support-cn@cambridgetechnology.com 0 Cambridge Technology. All rights reserved. DS0000 0/
ProSeries Scan Head 2-Axis, Enclosed
Product Highlights Our ProSeries 2-Axis enclosed scan heads are designed for a broad range of applications that require fast processing speeds or high-position accuracy. The plug-and-play scan heads are
Lincoln Motor Polygon Assemblies Polygonal Scanners
Product Highlights Lincoln high-performance motor polygon assemblies (MPA) are designed and assembled from an extensive selection of mirror, bearing, and motor technologies to meet your most demanding
Servo Driver Solutions for Optical Scanning Analog Series
Product Highlights Our performance PID drivers are fully-featured servos in compact, dual-axis, and high power configurations. Delivering both accuracy and power, our driver solutions support even the
Sintec Optronics Pte Ltd
10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 Sintec Optronics Pte Ltd OSST Series Galvanometer Optical Scanners Part number OSST8162 OSST8161 OSST8062 Optical
Nmark AGV-HPO. High Accuracy, Open Frame, Thermally Stable Galvo Scanner. Highest accuracy scanner available attains singledigit,
Nmark AGV-HPO Galvanometer Nmark AGV-HPO High Accuracy, Open Frame, Thermally Stable Galvo Scanner Highest accuracy scanner available attains singledigit, micron-level accuracy over the field of view Optical
QuantumScan-7 & 10 Moving Magnet Galvanometers
QuantumScan-7 & 10 Moving Magnet Galvanometers QuantumScan-10 For 10-15 mm Beam Apertures Patent Pending Ceramic Rotor For Faster Step Response Patent Pending Rear Adjustable Stops 3X Greater Position
Nmark AGV-HP. High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback technology significantly
Nmark AGV-HP. High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP Galvanometer Nmark AGV-HP High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback
intelliscan smart scanning
smart scanning SCANLAB's scan heads stand out with variant diversity and high dynamics. They're among the 2D scan systems that enable deflecting and positioning of laser beams in the working plane. The
Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) Galvanometer Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical
Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner
Nmark AGV-HP(O) High Accuracy, Thermally Stable Galvo Scanner Highest accuracy scanner available attains single-digit, micron-level accuracy over the field of view Optical feedback technology significantly
Atlantic. Industrial High Power Picosecond Lasers. features
Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 6 W output power at
FAST AND ACCURATE LASER DRILLING WITH HIGH SPEED DIGITAL SCAN HEAD AND SMART CONTROLLING METHODS Paper # M504
FAST AND ACCURATE LASER DRILLING WITH HIGH SPEED DIGITAL SCAN HEAD AND SMART CONTROLLING METHODS Paper # M504 Rosie Luo, Jin Li, Mark Lucas, Seetharam Sivam, Tony Li and Ying Li Cambridge Technology 125
Keysight Technologies Optics and Laser Heads for Laser-Interferometer Positioning Systems
Keysight Technologies Optics and Laser Heads for Laser-Interferometer Positioning Systems Technical Overview Choose from a large selection of optical components for system design flexibility Table of Contents
PRELIMINARY. The following table outlines the specifications of our standard tunable 2D-mirror MR Custom mirror coatings are possible.
Datasheet: MR-1-3 Copyright 212 Optotune Dual axis mirror with position feedback MR-1-3 Optotune s dual axis mirror series MR-1-3 is the ideal choice for applications that require large deflections in
hurryscan, hurryscan II
hurryscan, hurryscan II more Information at: universal and compatible These compact scan heads from SCANLAB provide optimal solutions for nearly all challenges found in industrial laser materials processing.
Sapphire LP. CW Visible Lasers from Deep Blue to Orange. Superior Reliability & Performance. Sapphire LP Features:
Sapphire LP Features: Sapphire LP is a series of compact CW visible lasers based on Coherent s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides established
Fast Tip/Tilt Platform
Fast Tip/Tilt Platform Short Settling Time and High Dynamic Linearity S-331 Tip/tilt angle up to 5 mrad, optical deflection angle up to 10 mrad (0.57 ) Parallel-kinematic design for identically high performance
BN17 Specifications BN17 SPECIFICATIONS - Continuous Stall Torque 11.0 to 21.0 oz-in ( Nm) Peak Torque oz-in (
BN17 Specifications Direct BN17 SPECIFICATIONS - Continuous Stall Torque 11.0 to 21.0 oz-in (.078 -.148 Nm) Peak Torque 21-66 oz-in (.148 -.466 Nm) Part Number* BN17-15AA- BN17-20AA- BN17-25AA- T F O T
Atlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W output
Optics and Laser Heads for Laser-Interferometer Positioning Systems Product Overview
Optics and Laser Heads for Laser-Interferometer Positioning Systems Product Overview Choose from a large selection of optical components for system design flexibility Table of Contents 3 4 6 8 8 9 10 12
mirrors in motion positioning and focusing laser beams
mirrors in motion positioning and focusing laser beams SCANLAB enables Single-Axis Modules XY Scan Modules SCANcube SCANgine intelliscan hurryscan hurryscan II SCANLAB s industry-proven galvano- This combination
OBIS CellX. The Universal Light Engine FEATURES
OBIS CellX The Universal Light Engine OBIS CellX is a multi-wavelength platform for use as the laser excitation Light Engine in applications requiring or laser wavelengths from a single module. CellX delivers
MEASUREMENT APPLICATION GUIDE OUTER/INNER
MEASUREMENT APPLICATION GUIDE OUTER/INNER DIAMETER Measurement I N D E X y Selection Guide P.2 y Measurement Principle P.3 y P.4 y X and Y Axes Synchronous Outer Diameter Measurement P.5 y of a Large Diameter
AgilOptics mirrors increase coupling efficiency into a 4 µm diameter fiber by 750%.
Application Note AN004: Fiber Coupling Improvement Introduction AgilOptics mirrors increase coupling efficiency into a 4 µm diameter fiber by 750%. Industrial lasers used for cutting, welding, drilling,
Atlantic. Industrial High Power Picosecond Lasers. features
Atlantic Industrial High Power Picosecond Lasers lasers have been designed as a versatile tool for a variety of industrial material processing applications. They are compact, OEM rugged, with up to 8 W
Motion Solutions for Digital Pathology
Parker Hannifin Electromechanical Dvision N. A. 1140 Sandy Hill Road Irwin, PA 1564203049 724-861-8200 www.parkermotion.com Motion Solutions for Digital Pathology By: Brian Handerhan and Jim Monnich Design
OPTICS IN MOTION. Introduction: Competing Technologies: 1 of 6 3/18/2012 6:27 PM.
1 of 6 3/18/2012 6:27 PM OPTICS IN MOTION STANDARD AND CUSTOM FAST STEERING MIRRORS Home Products Contact Tutorial Navigate Our Site 1) Laser Beam Stabilization to design and build a custom 3.5 x 5 inch,
Motion Solutions for Digital Pathology. White Paper
Motion Solutions for Digital Pathology White Paper Design Considerations for Digital Pathology Instruments With an ever increasing demand on throughput, pathology scanning applications are some of the
PiezoMike Linear Actuator
PiezoMike Linear Actuator With Position Sensor for Closed-Loop Operation N-472 High stability and holding force >100 N Self-locking at rest even when closed-loop control is switched off Compact design
P-611.Z Piezo Z-Stage
Physik Instrumente (PI) GmbH & Co. KG 2008. Subject to change without notice. All data are superseded by any new release. The newest release for data sheets is available for download at www.pi.ws. Cat120E
intelliweld smart welding
intellield more Information at: smart welding Designed for robot-assisted welding applications, this 3D-scan system is capable of swiftly positioning the laser beam along 3D contours. hile a robot guides
L = Length inches millimeters
BN42 Specifications Direct Brush Motors Position Sensors Synchros BN42 SPECIFICATIONS - Notes: 1. Motor mounted to a 10 x 10 x 1/4 inches aluminum plate, still air. 2. Maximum winding temperature of 155
COMPACT Diode Laser System (Water-Cooled)
COMPACT Diode Laser System (Water-Cooled) Easy-to-integrate CW system consists of a compact 19 (11HU including water-air-chiller), rack-mountable chassis and metal-armored fiber. Can be combined with DILAS
High Performance Current Transducer IT 200-S ULTRASTAB = A. ε L
High Performance Current Transducer IT 200-S ULTRASTAB For the electronic measurement of currents: DC, AC, pulsed..., with galvanic isolation between the primary circuit and the secondary circuit. I PM
Mini-MAG Positioning Products
Mini-MAG Positioning Products Miniature Linear Stage The Mini-MAG (MMG and MMX) line of miniature linear stages blends the ultimate in performance, reliability, and value, delivering nearly twice the accuracy
User-selectable output bus voltages for optimized voltage/current matching to load requirements.
Three Axis Gradient Amplifier 3-Axis 700A Precision Gradient Amplifier System 1500 VDC (OEM adjustable down to 800V) 100% Digital D-SERIES Technology Hi-Speed, Single Fiber-Optic Digital Command Universal
Analog Servo Drive. Peak Current 16 A (11.3 A RMS )
Description The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with a 120-degree
Galvanometer Scanning Technology and 9.3µm CO 2 Lasers for On-The-Fly Converting Applications
Lasers in Manufacturing Conference 2017 Galvanometer Scanning Technology and 9.3µm CO 2 Lasers for On-The-Fly Converting Applications M. Hemmerich a,*, M. Darvish a, J. Conroy b, L. Knollmeyer b, J. Way
High Reliability, High Performance and Value
High Reliability, High Performance and Value series Servo High Reliability, High Performance and Value series Servo βi series SERVO with high performance and value has enough performance and functions
Conduction-Cooled Bar Packages (CCPs), nm
Conduction-Cooled Bar Packages (CCPs), 780-830 nm High Power Single-Bar Packages for Pumping and Direct-Diode Applications Based on Coherent s legendary Aluminum-free Active Area (AAA ) epitaxy, Coherent
Genesis CX STM-Series
Coherent s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the Genesis CX-STM Series, providing up to 250 mw of UV laser light or up to 10W of visible laser light from either OEM or
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics. Preliminary Data Sheet
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics Preliminary Data Sheet The Keysight Technologies, Inc. E1834 family of beam delivery optics uses high performance mounts to meet the pointing
Laser Systems. !!!! iflex-iris
iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
Physics review Practice problems
Physics review Practice problems 1. A double slit interference pattern is observed on a screen 2.0 m behind 2 slits spaced 0.5 mm apart. From the center of one particular fringe to 9 th bright fringe is
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-S ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
Analog Servo Drive. Continuous Current. Features
Description Power Range The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with
NeoMetric Series Brushless servo motors
Compumotor NeoMetric Series Brushless servo motors 6 to 62 lb-in continuous torque Brushless construction High torque density packaging 4 week deliveries Outstanding torque-to-inertia ratios Bridged stator
DATA SHEET RTA-ARXXX-3G SMART DEFLECTOR TM NEWSON NV.
DATA SHEET RTA-ARXXX-3G SMART DEFLECTOR TM NEWSON NV Copyright Newson NV, 2000-2016 A3G_RTA Revision 1.6 page 1 Table of Contents 1 SMART DEFLECTOR TM... 3 1.1. GENERAL DESCRIPTION... 3 1.2. DIMENSIONS...
SCANLAB Perfect Scanning
mirrors in motion SCANLAB Perfect Scanning Galvanometer scanners High-performance laser scan systems Objectives and focusing units Components for system integration Software Customer-specific system development
FemtoFAB. Femtosecond laser micromachining system. tel fax Konstitucijos ave. 23C LT Vilnius, Lithuania
FemtoFAB Femtosecond laser micromachining system Konstitucijos ave. 23C LT-08105 Vilnius, Lithuania tel. +370 5 272 57 38 fax +370 5 272 37 04 info@wophotonics.com www.wophotonics.com INTRODUCTION FemtoFAB
F6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices
Coherent Diode Lasers Single-Stripe F6 Series Diode Lasers 6-Pin Fiber-Coupled Single-Stripe CW Devices Coherent s high-power, fiber-coupled, single-stripe diode lasers offer the simplest and easiest means
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer ITN 1000-S ULTRASTAB I PM = 1000 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
CUBE. Diode Laser System FEATURES
CUBE Diode Laser System The Coherent CUBE laser is a compact all-in-one laser system. CUBE lasers offer wavelengths from 75 nm to 70 nm with output power as high as 00 mw. Based on laser diode technologies
2554 n n n n n n n n n n n n n n. Captive External. E2554 n n n n n n n
HAYD: 03 756 744 G4 5000 Series: Ø 5 mm (.0-in) Can-Stack Stepper Motor Linear Actuator Haydon 5000 Series generates higher force than all other competitors. Offers high durability and exceptional performance.
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-SB ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features ± 10 V voltage output
M-041 M-044 Tip/Tilt Stage
M-041 M-044 Tip/Tilt Stage Piezo Drive Option for Nanometer Precision Ordering Information Linear Actuators & Motors M-041.00 Small Tilt Stage, Manual Micrometer Drive M-041.D01 Small Tilt Stage, DC-Motor
Wavelength Control and Locking with Sub-MHz Precision
Wavelength Control and Locking with Sub-MHz Precision A PZT actuator on one of the resonator mirrors enables the Verdi output wavelength to be rapidly tuned over a range of several GHz or tightly locked
Continuous-Wave (CW) Single-Frequency IR Laser. NPRO 125/126 Series
Continuous-Wave (CW) Single-Frequency IR Laser NPRO 125/126 Series www.lumentum.com Data Sheet The Lumentum NPRO 125/126 diode-pumped lasers produce continuous-wave (CW), singlefrequency output at either
Acculase Green PWM. Direct Drive Green Laser Diode Module
Acculase Green PWM Direct Drive Green Laser Diode Module Acculase Direct Drive Green Available in 520nm wavelength and with powers output powers up to 35mW the Acculase Direct Drive Green PWM represents
Beam deflection technologies for ultra short pulse lasers June 5th, 2018
Beam deflection technologies for ultra short pulse lasers June 5th, 2018 Agenda SCANLAB GmbH XL Scan excellishift precsys 2 SCANLAB at a Glance Worldwide leading OEM manufacturer of scan solutions for
Kollmorgen TBM(S) Motor Selection Guide
Kollmorgen TBM(S) Motor Selection Guide Sold & Serviced By: K O L L M O R G E N T B M ( S ) M O T O R S E L E C T I O N G U I D E Table of Contents u TBM Series Frameless Motor 3 u TBM(S) 60 Series Motor
Compact Photonics Control Solutions
Compact Photonics Control Solutions CONEX RoHS Compliant With the increasing complexity of optical setups, the need for remote diagnostics and control of repetitive tasks increases. Scientists and engineers
BMC s heritage deformable mirror technology that uses hysteresis free electrostatic
Optical Modulator Technical Whitepaper MEMS Optical Modulator Technology Overview The BMC MEMS Optical Modulator, shown in Figure 1, was designed for use in free space optical communication systems. The
High Performance Current Transducer ITL 900-T = A
High Performance Current Transducer ITL 900-T For the electronic measurement of currents: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. I PM = 0... 900 A Electrical
FC1010 FC10010 FC15030 BFC1010 BFC10010 BFC15030 BFC
Filter Cards for Single Phase Loads: Brushed Motors, Voice Coils, and other Single Phase Loads Filter Cards for Three Phase Loads: Brushless Motors, Linear Motors, and other Three Phase Loads Filter Cards
ART50/100 Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and small footprint. Ultra-fine resolution
/ Series Rotary Stages /100 Series Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and small footprint Ultra-fine resolution Integral brushless servomotor or microstepping motor Optional aperture
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer IN 1000-S N = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed loop (compensated)
BU941Z/BU941ZP BU941ZPFI
BU941Z/BU941ZP BU941ZPFI HIGH VOLTAGE IGNITION COIL DRIVER NPN POWER DARLINGTON TRANSISTOR VERY RUGGED BIPOLAR TECHNOLOGY BUILT IN CLAMPING ZENER HIGH OPERATING JUNCTION TEMPERATURE WIDE RANGE OF PACKAGES
Tunable Laser Kits. Features
Thorlabs' Tunable Laser Kits are designed for superior cavity construction flexibility and high-stability performance. Available in either a Littrow or Littman configuration, these external cavity laser
Ultimag Rotary Actuators
Ultimag Rotary Actuators.42 1% Duty Cycle 5% Duty Cycle 1% Duty Cycle.28 Torque - m.14 WARIG: Exposed Magnet may affect pacemakers. In the event a product unit's magnet is exposed due to product disassembly,
TETRA COMPACT - E AND FLEXI - PRO
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Motor Power Company introduces its new brushless servo bundle: TETRA COMPACT- ENHANCED, brushless servomotors, perfectly matched with the FLEXI-PRO
CUBE. Diode Laser System FEATURES & BENEFITS
Diode Laser System The Coherent laser is a compact all-in-one laser system. lasers offer wavelengths from 375 nm to 730 nm with output power as high as 100 mw. Based on laser diode technologies the laser
ADALAM Sensor based adaptive laser micromachining using ultrashort pulse lasers for zero-failure manufacturing D2.2. Ger Folkersma (Demcon)
D2.2 Automatic adjustable reference path system Document Coordinator: Contributors: Dissemination: Keywords: Ger Folkersma (Demcon) Ger Folkersma, Kevin Voss, Marvin Klein (Demcon) Public Reference path,
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
OBIS CORE LS. Next Generation Miniaturized OEM Laser Module FEATURES
OBIS CORE LS Next Generation Miniaturized OEM Laser Module The Coherent OBIS CORE LS suite of products provide miniaturized building blocks for OEM instruments designers. Consisting out of the Optically
CL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T
CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more
MODELS SM SERVOTUBE MODULE
Force» Peak: 46-92 N» Continuous: 6-27 N Maximum Velocity» Up to 10.8 m/s Feedback» Built-in position sensor» 1V pk-pk sin/cos» 6 micron repeatability» Optionally with high resolution encoder Range of
Mercury TM 1200 PCB-Mount Analog Encoders
Mercury TM 1200 PCB-Mount Analog Encoders For Customer Interpolation- Resolution to 0.078μm Reflective Linear and Rotary Encoders Sensor the size of a Dime Resolution Determined by Customer Electronics
Description of options, upgrades and accessories for the laser beam stabilization system Compact
Description of options, upgrades and accessories for the laser beam stabilization system Compact The basic configuration of the Compact laser beam stabilization system is fully equipped for stabilization
Actively Stabilized Scanning Single-Frequency. Ti:Sa /Dye Ring Laser External Doubling Ring Ti:Sa /Dye Standing Wave Laser
Actively Stabilized Scanning Single-Frequency Ti:Sa /Dye Ring Laser External Doubling Ring Ti:Sa /Dye Standing Wave Laser Ring Laser with the following options Broadband Ring Laser Passively Stabilized
Your Partner for Leading-Edge Scan Solutions
Your Partner for Leading-Edge Scan Solutions SCANLAB GmbH is the leading OEM manufacturer of scan solutions for deflecting and positioning laser beams. 30,000+ scan systems shipped annually to 38 countries
iflex-iris Fiber coupled laser systems Product features include:
PSM1041 issue 2 iflex-iris Fiber coupled laser systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally
Atlantic. series. Industrial High Power Picosecond DPSS Lasers
Atlantic series Industrial High Power Picosecond DPSS Lasers Laser description Laser micromachining is rapidly becoming the material processing technology of choice for numerous small scale, real world
MODEL Sx SERVOTUBE MODULE
Force» Peak: 156-780 N» Continuous: 42-102 N Maximum Velocity» Up to 8.5 m/s Feedback» Built-in position sensor» 1V pk-pk sin/cos» 12 micron repeatability» Optionally with high resolution encoder Range
Capacitive sensors capancdt
Capacitive sensors capancdt Measuring principle capacitive sensors - Principle of ideal plate capacitor - Two plate electrodes are represented by sensor and measurement object - Measurement on insulators
Concepts for High Power Laser Diode Systems
Concepts for High Power Laser Diode Systems 1. Introduction High power laser diode systems is a new development within the field of laser diode systems. Pioneer of such laser systems was SDL, Inc. which
UNMATCHED OUTPUT POWER AND TUNING RANGE
ARGOS MODEL 2400 SF SERIES TUNABLE SINGLE-FREQUENCY MID-INFRARED SPECTROSCOPIC SOURCE UNMATCHED OUTPUT POWER AND TUNING RANGE One of Lockheed Martin s innovative laser solutions, Argos TM Model 2400 is
iflex-iris Laser Systems Product features include:
PSM1035 issue 3 iflex-iris Laser Systems The Qioptiq iflex-iris solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for
WDBR Series (RoHS compliant)
WDBR Series (RoHS compliant) This new range of thick film planar power resistors on steel, offering high pulse withstand capability, compact footprint and low profile, to many demanding applications including
FireFly Green. It is a self-contained laser that offers the user increased stability over a wide operating temperature and with a faster warm up time.
FireFly Green FireFly Green The FireFly Green range sets a new standard for industrial grade, green laser diode modules. A radically new design provides TE stabilised performance without TE cost and power
Integrated Diode Laser System DioPower
Integrated Diode Laser System DioPower PC with LETSoft program DioPower Integrated Components Applications Laser Diode from 15 to 120W Material processing Laser Diode driver up to 6V / 100A Laser soldering
Fastest high definition Raman imaging. Fastest Laser Raman Microscope RAMAN
Fastest high definition Raman imaging Fastest Laser Raman Microscope RAMAN - 11 www.nanophoton.jp Observation A New Generation in Raman Observation RAMAN-11 developed by Nanophoton was newly created by
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
Diamond Analysis. Innovation with Integrity. Reliable identification and type determination by FTIR spectroscopy FTIR
Diamond Analysis Reliable identification and type determination by FTIR spectroscopy Innovation with Integrity FTIR FTIR Diamond Analysis Since the appearance of synthetic diamonds, nearly perfect imitates
Marking Cutting Welding Micro Machining Additive Manufacturing
Marking Cutting Welding Micro Machining Additive Manufacturing Slide: 1 CM-F00003 Rev 4 G4 Pulsed Fiber Laser Slide: 2 CM-F00003 Rev 4 Versatility for Industry Automotive 2D/3D Cutting Night & Day Marking
:... resolution is about 1.4 μm, assumed an excitation wavelength of 633 nm and a numerical aperture of 0.65 at 633 nm.
PAGE 30 & 2008 2007 PRODUCT CATALOG Confocal Microscopy - CFM fundamentals :... Over the years, confocal microscopy has become the method of choice for obtaining clear, three-dimensional optical images