POWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
|
|
- Francine Jacobs
- 6 years ago
- Views:
Transcription
1 POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical and ITE safety approvals, x MOPP Dual fused Type BF ready Active Power Factor Correction, 60-- compliant Built-in Class B EMI filter Less than 1U high LPX enclosure kit available <500 mw no-load power consumption Compact size: x 4 x 1. For use in Class I or Class II applications Three-year warranty (consult factory for extended terms) SAFETY EN / UL / CSA CE LVD Mark CCC Electrical Specifications Input Input voltage ra nge Frequency Inrush current Leakage current No load power Output Maximum power Vrms 47-6 Hz ( Hz with higher leakage) 70 Apk, < 1 ms, cold start 9% typical Specified for medical approvals < 500 mw Adjustment range -0% / +10% Holdup time Fan output Standby output Control and Protection Remote On/Off DC OK Overvoltage protection Overcurrent protection Short circuit protection Overtemperature protection 50 W, forced-air cooling 155 W, free-air natural convection 10 5 W ma 5 ma (For CPS5-M1 only) For CPS5-M1 only For CPS5-M1 only Latching/AC Recycle required to restart PSU Auto-recovery Auto-recovery (impedance <50 mohm Auto-recovery with hysteresis
2 CPS50-M Series Data Sheet Environmental Specifications Operating temperature -0 C to +70 C (derate at 50 C), startup at -40 C Storage temperature -40 C to +85 C Operating humidity 5% to 90% (non-condensing) Non-operating humidity 5% to 95% (non-condensing) Maximum altitude 5000 m (000 m for medical), derating may apply Other Specifications Isolation Line harmonics 4000 Vac (input to output) 1500 Vac (input to PE; output to PE) 60--, Class A Conducted EMI* Level B, CISPR and FCC Part 15 Radiated EMI* Level B, CISPR and FCC Part 15 Surge immunity Medical EMC MTBF (Telcordia, Issue, Method 1 Case ) Level, , Criterion A , Edition 4 (cover may be required for some tests) >. MHrs, 5 C, 155 W Natural Convection, 115 VAC > 5.1 MHrs, 5 C, 50 W Forced Air, 115 VAC *Applies to Class I input with ground tabs tied to a common ground plane and connected to system ground. Consult Technical Reference Notes for details. Pin Assignments Connector Pin Number Designation Mating Conectors J5 (AC Input) 1 Mounting Holes J0 (DC Output) AC Input L1/Line AC Input L/Neutral PE Return Return Return Molex housing with crimp or equivalent. Use AWG 0-18 wires. Molex housing with crimp or equivalent. Use AWG 0-18 wires. BusBar (DC Output) Applies to 1 V variant only. 1 Return Ring terminal: Tyco 5148 or KST RV-4 or equivalent. J (Fan Supply) 1 Fan Return Fan Voltage Cvilux: CI010S0000 housing; CI01T01MPP0 crimp Landwin: 001S000 housing; 005T011V crimp AWG # 0-4 J40 Applies to CPS5-M1 only Vdc Standby Standby Return Remote Inhibit DC OK VFB (feedback loop pin) Molex with crimp or equivalent. Use AWG 0-6 wires.
3 CPS50-M Series Data Sheet Mechanical Drawings - 1 V Variant
4 CPS50-M Series Data Sheet Mechanical Drawings - 4 V and 48 V Variants
5 CPS50-M Series Data Sheet Mechanical Drawings - CPS5-M1.77MAX Vo(+) 50.8 ASSY-J0.5MAX J-PIN 1 (X)4.8 (X).5 Q501 SEE DETAIL A J (X).5 WARNING LABEL C1 J40 SEE DETAIL B (X)94.6 L T501 BARCODE (4X) 4 J40 - PIN1 MODEL LABEL J5 -PIN 1 INPUT J5 PREFERRED EARTH Q501 DETAIL B DETAIL A Notes: 1. OCP can not be adjusted on the fly. Default setting is for 50 W Forced Air.. Unit should be turned off before trimpot adjustment.. OCP does not vary linearly with the trimpot adjustment. It is either Full clockwise (50 W) or Full counter clockwise (155 W). 4. Thermal Hot Spot Reference - Do not exceed indicated temperature limits to ensure operation is within the conponent thermal derating limits. Measure the component temperatures using K type thermocouples. 5. Recommended Mounting Screw: M.0 (4X) Pan head screw with teeth washer; 6 mm length; 6~8 Kgf-cm Torque. 6. Unit weight: 00 g max Thermal Hot Spot Reference Component Temperature Limit L 15 C T C Q C C1 95 C
6 CPS50-M Series Data Sheet Output Power Derating Output Power Derating Output Power VS. Input Line Output Power [Watts] FORCED AIR NATURAL CONVECTION Output Power [Watts] FORCED AIR NATURAL CONVECTION Ambient Temperature [ C] Figure 1. Output Power vs. Ambient Temperature at Natural Convection and Forced Air Cooling [00 LFM] AC Input Line [Vac] Figure. Output Power vs. Input Line at Natural Convection and Forced Air Cooling [00 LFM]. Curves 96% CPS5 M (1V) Curve 96% CPS55 M (4V) Curve 95% 95% 94% 94% 9% 9% 9% 91% 90% 9% 91% 90% 89% 89% 88% 87% 115 Vac 0 Vac 88% 87% 115 Vac 0 Vac 86% % of Rated Output Load Figure. Typical for 1 V Output 86% % of Rated Output Load Figure 4. Typical for 4 V Output 96% CPS58 M (48V) Curve Natural Convection Estimated Service Life vs Component Temp % 94% 9% 9% 91% 90% 89% 88% 87% 115 Vac 0 Vac Estimated Life 50 Lifetime (KHrs) 86% % of Rated Output Load C1 Temperature [ C] Figure 5. Typical for 48 V Output Figure 6. Estimated product useful life based on C1 (bulk capacitor) case temperature
7 CPS50-M Series Data Sheet Ordering Information Model number Output voltage Minimum load Max. Continuous Load (Free Air) Peak Load (Free Air) 1 Max. Continuous Load (Forced Air) Regulation Ripple (p-p) 4 CPS5-M 1 V 0 A 1.9 A 15.5 A 0.8 A ±% 10 mv CPS5-M1 1 V 0 A 1.9 A 15.5 A 0.8 A ± % 10 mv CPS55-M 4 V 0 A 6.45 A 7.74 A 10.4 A ±% 40 mv CPS58-M 48 V 0 A. A.88 A 5.1 A ± % 480 mv 1 Peak Load current not to exceed 0 seconds with maximum 10% duty cycle. Requires at least 00 LFM of airflow. At 5 C including factory setpoint, Line voltage and Load current variations. 4 Peak to peak ripple measured at the output terminals with 10µF tantalum capacitor in parallel with 0.1µF ceramic capacitor across the output & at 5 C and output load 6W. Accessories and Connector Kits Part Number Description CPS55-M (4 V) and CPS58-M (48 V): Complete mating connector kit for Input (J5); Output (J0) and 1 V fan supply (J) CPS5-M (1 V): Complete mating connector kit for Input (J5); DC busbar ring lugs and 1 V fan supply (J) CPS5-M1 (1 V + M1 option): Complete mating connector kit for Input (J5); DC busbar ring lugs; 1 V fan supply (J) and -M1 optional features (J40) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 900 S.Diablo Way Tempe, AZ 858 USA Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) /F, Lu Plaza Wing Yip Street Kwun Tong, Kowloon Hong Kong Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. 017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit For more information: For support: productsupport.ep@artesyn.com CPS50-M Series DS 08Dec017
POWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-6 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationPOWER CSV900BP. 900 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV900BP 900 Watts Distributed Power System Front-end Bulk Power Total Output Power: 900 W Input Voltage: 90 to 264 Vac SPECIAL FEATURES 900 W output power U power supply Active Power
More informationPOWER CSV1300BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV300BP 300 Watts Distributed Power System Front-end Bulk Power Total Output Power: 300 W continuous at high line Input Voltage: 90 to 37 Vac, 80 to 264 Vac SPECIAL FEATURES 300 W output
More informationPOWER CSV2000BP Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSV2000BP 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W Input Voltage: 80 to 265 Vac Special features 2000 W output power U power supply Active Power
More informationElectrical Specifications. Input range Vac (Operating) 115/230 Vac (Nominal) TERMINAL BLOCK Frequency Hz, Nominal 50/60
POWER Data Sheet LCM300 310 Watt Bulk Front End Total Power: 310 W # of Outputs: Single Outputs: 12 to 60 V Optional 5.0 V standby SPECIAL FEATURES 310 W output power (350 W at 45 C for 24 V and 36 V models)
More informationPOWER DS500SDC. 500 Watts Distributed Power System. Data Sheet
POWER Data Sheet Front-end Bulk Power Total Output Power: 500 W continuous Wide Input Voltage: -36 to -72 Vdc DS500SDC 500 Watts Distributed Power System SPECIAL FEATURES 500 W output power High power
More informationElectrical Specifications. > 0.9 beginning at 20% load. ITHD 10% Leakage current. Ordering Information
POWER Data Sheet DS2000SPE Series 2000 Watts Distributed Power System Front-end Bulk Power Total Output Power: 2000 W continuous at high line 90-140 V &180-264 Vac Operation SPECIAL FEATURES 2000 W output
More informationPOWER DS Watts Distributed Power System. Data Sheet
POWER Data Sheet Distributed Power Bulk Front-End Total Output Power: 2900 Watts +3.3 Vdc Stand-by Output Wide Range Input Voltage: 180-264 Vac DS2900 2900 Watts Distributed Power System Special features
More informationPOWER CSU550AP. 550 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet CSU550AP 550 Watts Distributed Power System Front-end Bulk Power Total Output Power: 550 W continuous Wide Input Voltage: 90-264 Vac; 164-320 Vdc SPECIAL FEATURES 550 W output power High
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90-264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER LCM Watt Bulk Front End. Electrical Specifications. Data Sheet. Total Power: 3000 W # of Outputs: Single Outputs: 12 to 72 V
POWER Data Sheet LCM3000 3000 Watt Bulk Front End Total Power: 3000 W # of Outputs: Single Outputs: 12 to 72 V Special features 3000 W output power Low cost 2.5 x 7.0 x 10.9 15.7 Watts per cubic inch Industrial/Medical
More informationPOWER DS250SPE. 250 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS250SPE 250 Watts Distributed Power System Front-end Bulk Power Total Output Power: 250 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 250 W output power High power and
More informationElectrical Specifications. Harmonics Meets EN Class A and Class C 2. Artesyn Filter PN: (Zhongguang PN: ZGLPG-10-02M).
POWER Data Sheet LCC600 600 Watts Conduction Cooling Total Power: 600 W # of Outputs: Single Outputs: 12, 28, 36, 48 Vdc SPECIAL FEATURES 600 W full power at elevated temperatures Wide operating temperature
More informationElectrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
More informationPOWER DS1100PED Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100PED 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High-power
More informationPOWER DS1100SLPE Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS1100SLPE 1100 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1100 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 1100 W output power High power
More informationPOWER DS750PED. 750 Watts Distributed Power System. Electrical Specifications. Data Sheet
POWER Data Sheet DS750PED 750 Watts Distributed Power System Front-end Bulk Power Total Output Power: 750 W continuous Wide Input Voltage: 90 to 264 Vac SPECIAL FEATURES 750 W output power High-power and
More informationElectrical Specifications
POWER Data Sheet LCM600 600 Watt Bulk Front End Total Power: 600 W # of Outputs: Single Outputs: 12 to 60 V Optional 5.0 V standby SPECIAL FEATURES 600 W output power Low cost 2.4 x 4.5 x 7.5 7.41 W/cu-in
More informationElectrical Specifications. Input voltage range Vac: 1000 W/1200 W Vac: 1200 W. Max input current. ITHD 10% Leakage current
POWER Data Sheet DS1200HE 1200 Watts Distributed Power System Front-end Bulk Power Total Output Power: 180 to 264 Vac: 1200 W continuous 90 to 140 Vac: 1000 W/ 1200 W 1 continuous SPECIAL FEATURES 1200
More informationPOWER DS1600SPE Watts Distributed Power System. Electrical Specifications. Ordering Information. Data Sheet
POWER Data Sheet DS1600SPE 1600 Watts Distributed Power System Front-end Bulk Power Total Output Power: 1600 W continuous at high line Wide Range Input Voltage: 90-264 Vac SPECIAL FEATURES 1600 W output
More informationElectrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
More informationThese medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationCPS250-M. Product Descriptions. 250 Watts (forced air) 155 Watts (convection) Special Features
CPS250M 250 Watts (forced air) 155 Watts (convection) ITE / Medical CPS250M Page 1 Total Power: 155250 Watts Input Voltage: 90264 Vac # of Outputs: Single Special Features Designed for forced air and natural
More informationPOWER DS3000PE High Line: 3000 W Low Line: 1350 W. Electrical Specifications. Data Sheet
POWER Data Sheet DS3000PE High Line: 3000 W Low Line: 1350 W Distributed Power Bulk Front-end Single Ouptut Standard Total Output Power: 3000 W continuous 208 Vac to 264 Vac, 3000 W 1 90 Vac to 140 Vac,
More informationThese power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
More informationThese medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
More information150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
More informationPOWER. LGA50D Standard Profile Series Dual O/P Non-isolated 50 A Digital DC/DC Converter. Electrical Specifications. PROPOSED PRODUCT Data Sheet
POWER PROPOSED PRODUCT Data Sheet Total Current: 50 A (single) 25 A (dual) Input Voltage: 7.5-14 Vdc Variable Output: 0.6-5.0 V (standard profile) LGA50D Standard Profile Series Dual O/P Non-isolated 50
More informationThe MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
More information1 V/ms V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
1 Vin 1 of 5 Total Power: Watts # of Outputs: Single Special Features A output current 1 V input voltage Wide-output voltage adjust 1. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc - 1.8 Vdc for suffix L Auto-track
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
More informationElectrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
More informationElectrical Specifications
Up to 6000 Watts 1 of 6 Total Power: Up to 6000 W Input Voltage: 85-264 Vac # of s: Single + Aux : 24 V & 48 V Special Features Rack mounted chassis (1U, 19 ) 3 hot pluggable rectifiers per 1U chassis,
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationCompliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
More informationElectrical Specifications. Input undervoltage shutdown/startup. 37 Vdc shutdown 93% (target for -04Y variant) Overtemperature protection (Open frame)
POWER Preliminary Data Sheet ADC100M Series 100 Amp PSA Main DC/DC Converter Total Power: 100 W, 180 W (1.0 V @ 100 A) (1.8 V @ 100 A) Input Voltage: 40-60 Vdc Single Output Versions: 0.6-1.2 V 1.6-2.0
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1..1_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features W Full power at elevated temperatures Wide
More information5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
More informationElectrical Specifications Input
3000 Watts 1 of 8 Distributed Power Bulk Front-End Single Output Special Features 3000 W output power 40 W/cu-in Optional customer provided air 1U x 3U form factor N+1 Redundant Hot-swap Internal OR-ing
More informationIMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
More informationLFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
More informationElectrical Specifications
usiness-ritical ontinuity L Watts onvection/onduction Mounting Rev. 1.31.11_11 L Series 1 of 7 Total Power: W # of Outputs: Single Output: 1,, 8 V Special Features 1 VD / W output power Wide Operating
More informationECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
More informationMedical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
More informationIMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 400 Watts Power Supply Series for medical and industrial applications Product data sheet 400 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More informationGeneral. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
More informationElectrical Specifications
Series 0 Watts C-Class Non-Isolated SXX06E Rev. 08.0.06 Page of 2 of Total Power: 0 Watts Input Voltage: 3-3.8 Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: 0.9 -.
More informationIMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More information420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
More informationPTH03060Y & PTH05060Y PTH12060Y. Vin increasing Vin decreasing PTH05060Y PTH12060Y PTH12060Y
3.3/5/ of 5 Total Power: Watts # of Outputs: Single Special Features V TT bus termination output (output the system V REF ) 0 A output current 3.3, 5 or Vdc input voltage DDR and QDR compatible ON/OFF
More informationMVAB120 Series 120W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAB120 Series FEATURES ITE (2nd) and Medical 3rd ed. 1MOPP (primarysecondary) safety approved 120W compact high density 2" x 4" standard footprint High effi ciency up to 91% Universal
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationPTH03010Y & PTH05010Y PTH12010Y. Vin increasing Vin decreasing PTH05010Y PTH12010Y PTH12010Y
PTHxx00Y 3.3/5/ Rev. 3.3.09_3 of 5 Total Power: Watts # of Outputs: Single Special Features bus termination output (output the system V REF ) 5 A output current 3.3, 5, or Vdc input voltage DDR and QDR
More informationLDO03C SERIES. Single Output. LDO03C Series 3 A DC-DC C Class Non-Isolated DC/DC Converter [ 2 YEAR WARRANTY ]
LDO03C SERIES Single Output 3 A current rating Input voltage range 3-13.8 V Adjustable output voltage 0.59-5.1 V Optional 3-pin model factory set Optional 5-pin model factory set with power good option
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationOutput Voltage (Vfan) Convection-cooled (6,7) Forced-cooled (8) & Current
C-DC Power Supplies 5/8/25/35 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safety pprovals (Class I & II)
More informationECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationThis convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationGeneral. Environmental. EMC & Safety
AC-DC 400-2500 Watts f lexpower Series Configurable for Fast Time to Market SEMI F47 Compliant xppower.com Flexible Series & Parallel Capability -20 C Operation Extra Power Available at High Line Optional
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationCLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationPDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
More informationOutput Voltage (Vfan) & Current
C-DC Power Supplies 50/80/250/350 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safey pprovals (Class I & II) < 0.5 W Standby Power (50 & 80 Models) -40 C to +70 C Operation
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationAC/DC Power Supply Series APPLICATION NOTE
-175 AC/DC Power Supply Series APPLICATION NOTE NV175 Application notes 3.4.doc Document Number 69493 Page 1 of 16 1. INPUT...3 AC INPUT LINE REQUIREMENTS... 3 2. DC OUTPUT...3 OUTPUT VOLTAGES... 3 REMOTE
More informationWatts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
More informationCCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
More informationXSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationIP67 DESCRIPTION KEY FEATURES MARKET SEGMENT AND APPLICATIONS TRC ELECTRONICS, INC
DESCRIPTION DDP400HV is a series of high efficiency, small form factor AC DC power supplies operating at 277/347/480V AC inputs. The series provides a steady 400 W of regulated DC power through the full
More informationAC/DC Power Supply Series APPLICATION NOTE
-175 AC/DC Power Supply Series APPLICATION NOTE 69493 NV175 App note 4.doc Document Number 69493 Page 1 of 17 1. INPUT...3 AC INPUT LINE REQUIREMENTS... 3 2. DC OUTPUT...3 OUTPUT VOLTAGES... 3 REMOTE SENSE...
More informationQUARTER-BRICK QUARTER-BRICK SERIES. Single Output Ultra Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 28 Total Power: 150-200W Total Power: -- Input Voltage: 36-75Vdc Input Voltage: -- # of Outputs: Single Output
More information70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL CIRCUIT TOPOLOGY...2
SNP-Z077 Specification Page 1 of 7 70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL...2 2. CIRCUIT TOPOLOGY...2 3. AC INPUT...2 3.1. INPUT VOLTAGE...2 3.2. INPUT
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationsolo Ultra-high efficiency 1U size Xsolo Single Output Power Supply 500W W 2 FEATURES APPLICATIONS INCLUDE
XS XS solo Ultra-high efficiency 1U size FEATURES The family of single output power supplies provides up to an incredible 1008W in an extremely compact package. Single output: 24V, 36V or 48V IEC60950
More informationDDP400 SERIES KEY FEATURES DESCRIPTION MARKET SEGMENTS AND APPLICATIONS
400 W ACDC COMPACT, EFFICIENT POWER SUPPLY DDP400 SERIES KEY FEATURES Universal input voltage range (85 264 V AC ) Active PFC, EN 6100032 Class C, D compliant Steady 400W output power (440 W peak) INDUS
More informationAC/DC Power Supply Series APPLICATION NOTE
-175 AC/DC Power Supply Series APPLICATION NOTE 69493 NV175 App note 6a.doc Document Number 69493 Page 1 of 20 1. INPUT... 4 AC INPUT LINE REQUIREMENTS... 4 2. DC OUTPUT... 4 OUTPUT VOLTAGES all models
More informationEIGHTH-BRICK SERIES. Single Output Value Products. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity 1 of 31 EIGHTH-BRICK SERIES Total Power: 50 W Input Voltage: 36-75 VDC # of Outputs: Single Special Features High efficiency topology
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationThe MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
More informationThe MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
More information