Dual-Rate 1000BASE-LX and 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver SFP-10GLR-31

Size: px
Start display at page:

Download "Dual-Rate 1000BASE-LX and 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver SFP-10GLR-31"

Transcription

1 Optical Communication System Dual-Rate 1000BASE-LX and 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver SFP-10GLR-31 Features Hot-pluggable SFP+ footprint Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates Power dissipation < 1W RoHS-6 compliant (lead-free) Commercial temperature range 0 C to 70 C Single 3.3V power supply Maximum link length of 10km Uncooled 1310nm DFB laser Receiver limiting electrical interface Application 1000BASE-LX 1G Ethernet 10GBASE-LR/LW 10G Ethernet 1 Duplex LC connector Built-in digital diagnostic functions)

2 Description The 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10- Gigabit Ethernet links up to 10km over singlemode fiber. They are compliant with SFF- 8431, IEEE GBASE-LR/LW and 1000BASE-LX.Digital diagnostics functions are available via a 2-wire serial interface. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. This is a limiting module, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer s recommended settings for interoperating the host- board EDC PHY with a limiting receiver SFP+ module. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. Product Specifications I.General Specifications Parameter Symbol Min Type Max Unit Note Bit Rate (RS0 = LOW) BR 1.25 Gb/s 1 Bit Rate (RS0 = HIGH) BR Gb/s 2 Max. Supported Link Length L MAX 10 km Notes: BASE-LX. Tested with a 27-1 PRBS. See Section I, Note 5 for RS0 conditions for 1.25Gb/s operation GBASE-LR/LW. Tested with a PRBS. See Section I, Note 5 for RS0 conditions for 10.3 Gb/s operation. 2

3 II. Absolute Maximum Ratings Parameter Symbol Min Type Max Unit Ref. Maximum Supply Voltage Vcc V Storage Temperature T S C Case Operating Temperature T OP 0 70 C Relative Humidity RH 0 85 % 1 Note: Non-condensing. III. Electrical Characteristics (TOP = 0 to 70, VCC = 3.14 to 3.46 Volts) Parameter Symbol Min Type Max Unit Ref. Supply Voltage V cc V Supply Current I cc ma Transmitter (Tx) Input differential impedance R in 100 Ω 1 Differential data input swing V in,pp mv Transmit Disable Voltage V D 2 V CC V Transmit Enable Voltage V EN Vee Vee+0.8 V 3

4 Receiver (Rx) Differential data output swing V out,pp mv 2,5 Output rise time and fall time T r, T f 20 ps 3 LOS Fault V LOS Fault 2 V cchost V 4 LOS Normal V LOS Norm Vee V ee +0.8 V 4 Power Supply Noise Tolerance V cct /V ccr Per SFF-8431 Rev 4.1 mvpp Notes: 1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC. 2. Into 100Ωdifferential termination %. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1 s and four 0 s sequence in the PRBS 9 is an acceptable alternative. 4. LOS is an open collector output. Should be pulled up with 4.7kΩ 10kΩon the host board. Normal operation is logic 0; loss of signal is logic The transceiver is a limiting module, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. 4

5 IV. Optical Characteristics for RS0 = LOW (1G Operation) (TOP = 0 to 70, VCC = 3.14 to 3.46 V) Parameter Symbol Min Type Max Unit Note Transmitter Average Launch Power P AVE dbm 1 Optical Wavelength λ nm Rise-Fall Time Trise/Tfal 0.26 ns 2 RMS Spectral Width λ rms 4 nm Optical Extinction Ratio ER 9 db Average Launch power of OFF transmitter P OFF -30 dbm Tx Jitter Txj Per requirements Relative Intensity Noise RIN -120 db/hz Receiver Receiver Sensitivity RSENS dbm 3 Stressed Receiver Sensitivity SRS dbm 4 Average Receive Power P AVE -3 dbm Optical Center Wavelength λ C nm Return Loss Rrx 12 db Receive electrical 3dB upper cutoff frequency 1500 MHz 5

6 LOS De-AssertLOS De-Assert LOS D -17 dbm LOS Assert LOS A -30 dbm LOS Hysteresis 0.5 db Notes: 1. Average power figures are informative only, per IEEE %-80%. 3. Valid between 1260 and 1355 nm. Measured with worst-case ER; BER<10-12; PRBS. 4. Valid between 1260 and 1355 nm. Per IEEE dB extinction ratio transmitter. V. Optical Characteristics for RS0 = HIGH (10G Operation) (TOP = 0 to 70, VCC3 = 3.14 to 3.46 Volts) Parameter Symbol Min Type Max Unit Ref. Transmitter Optical Modulation Amplitude (OMA) P OMA dbm 1 Average Launch Power P AVE dbm Optical Wavelength λ 1260 nm Side-Mode Suppression Ratio SMSR 30 db Optical Extinction Ratio ER 3.5 db Transmitter and Dispersion Penalty Average Launch power of OFF transmitter TDP 3.2 db P OFF -30 dbm 6

7 Tx Jitter Txj Per requirements Relative Intensity Noise RIN -128 db/hz Receiver Receiver Sensitivity 10.3Gb/s Stressed Receiver Sensitivity 10.3Gb/s Average Receive Power Optical Center Wavelength R SENS dbm 2 R SENS dbm 3 P AVE dbm λ C nm Receiver Reflectance Rrx -12 db LOS De-Assert LOS D -17 dbm LOS Assert LOS A -30 dbm LOS Hysteresis 0.5 db Notes: 1. Average power figures are informative only, per IEEE Valid between 1260 and 1355 nm. Measured with worst ER; BER<10-12; PRBS. 3. Valid between 1260 and 1355 nm. Per IEEE

8 VI.Digital Diagnostic Specifications Dual-Rate 1000BASE-LX and 10GBASE-LR SFP+ transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics. Parameter Symbol Min Type Max Units Ref. Accuracy transceiver temperature transceiver supply voltage DD Temperature 3 ºC DD Voltage 3 % Measured TX bias current DD Bias 10 % 1 Measured TX output power DD Tx-Power 2 db Measured RX received average optical power DD Rx-Power 2 db Dynamic Range for Rated Accuracy transceiver temperature transceiver supply voltage DD Temperature ºC DD Voltage V Measured TX bias current DD Bias 0 tbd ma Measured TX output power DD Tx-Power dbm Measured RX received average optical power DD Rx-Power dbm 8

9 Max Reporting Range transceiver temperature DD Temperature ºC transceiver supply voltage DD Voltage V Measured TX bias current DD Bias 0 20 ma 1 Measured TX output power DD Tx-Power dbm Measured RX received average optical power DD Rx-Power dbm Parameter Symbol Min Type Max Units Ref. Accuracy transceiver temperature DD Temperature ºC transceiver supply voltage DD Voltage V Measured TX bias current DD Bias 0 tbd ma Measured TX output power DD Tx-Power dbm Measured RX received average optical power DD Rx-Power dbm 9

10 Max Reporting Range transceiver temperature DD Temperature ºC transceiver supply voltage DD Voltage V Measured TX bias current DD Bias 0 20 ma Measured TX output power DD Tx-Power dbm Measured RX received average optical power DD Rx-Power dbm Notes: 1. Accuracy of measured Tx bias current is 10% of the actual bias current from the laser driver to the laser. 10

11 VII. Pin Description Figure 1. Diagram of Host Board Connector Block Pin Numbers and Names. Pin Symbol Name/Description Ref. 1 V EET Transmitter Ground 1 2 T FAULT Transmitter Fault 2 3 T DIS Transmitter Disable. Laser output disabled on high or open. 3 4 SDA 2-wire Serial Interface Data Line 2 5 SCL 2-wire Serial Interface Clock Line 2 6 MOD_ABS Module Absent. Grounded within the module 2 7 RS0 Rate Select

12 8 RX_LOS Loss of Signal indication. Logic 0 indicates normal operation. 5 9 RS1 Rate Select V EER Receiver Ground 1 11 V EER Receiver Ground 1 12 RD- 13 RD+ Receiver Inverted DATA out. AC Coupled. Receiver Non-inverted DATA out. AC Coupled. 14 V EER Receiver Ground 1 15 V CCR Receiver Power Supply 16 V CCT Transmitter Power Supply 17 V EET Transmitter Ground 1 18 TD+ 19 TD- Transmitter Non-Inverted DATA in. AC Coupled. Transmitter Inverted DATA in. AC Coupled. 20 V EET Transmitter Ground 1 Notes: 1. Circuit ground is internally isolated from chassis ground. 2. TFAULT is an open collector/drain output, which should be pulled up with a 4.7k -10k Ohms resistor on the host board if intended for use. Pull up voltage should be between 2.0V to Vcc + 0.3V. A high output indicates a transmitter fault caused by either the TX bias current or the TX output power exceeding the preset alarm thresholds. A low output indicates normal operation. In the low state, the output is pulled to <0.8V. 3. Laser output disabled on T DIS >2.0V or open, enabled on T DIS <0.8V. 4. Internally pulled down per SFF-8431 Rev 2.0. See Sec. X for the logic table to use for the internal CDRs locking modes. 5. LOS is open collector output. Should be pulled up with 4.7kΩ -10kΩ on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. 12

13 VIII. Mechanical Specifications 13

14 IX. PCB Layout and Bezel Recommendations 14

15 15

16 Copyright Fiberstore Optical Communication System Test Center Only when quality and 100% compatibility is verified and proved do our modules enter the market. This depends on Fiberstore test center which is supported by a variety of mainstream original brand switches and professional staff. We are proud of this test center and believe all of these devices worth the investments, because it brings the best to our customers. The original switches could be found nowhere but at Fiberstore's test center, eg: Juniper MX960 & EX 4300 series, Cisco Nexus 9396PX & Cisco ASR 9000 Series, HP 5900 Series & HP 5406R ZL2 V3(J9996A), Arista 7050S-64, Brocade ICX Q & ICX , Avaya VSP 7000 MDA 2, etc. Cisco ASR 9000 Series(A9K-MPA-1X40GE) ARISTA 7050S-64(DCS-7050S-64) Juniper MX (755) sales@fiberstore.com www. Brocade ICX Q Extreme Networks X670V VIM-40G4X Mellanox M3601Q Dell N4032F HP 5406R ZL2 V3(J9996A) AVAYA 7024XLS(7002QQ-MDA) 16

17 Test Assured Program Fiberstore truly understands the value of compatibility and interoperability to each optics. Every module Fiberstore provides must run through programming and an extensive series of platform diagnostic tests to prove its performance and compatibility. In our test center, we care of every detail from staff to facilities professionally trained staff, advanced test facilities and comprehensive original-brand switches, to ensure our customers to receive the optics with superior quality. Our smart data system allows effective product management and quality control according to the unique serial number, properly tracing the order, shipment and every part. Our in-house coding facility programs all of our parts to standard OEM specs for compatibility on all major vendors and systems such as Cisco, Juniper, Brocade, HP, Dell, Arista and so on. With a comprehensive line of originalbrand switches, we can recreate an environment and test each optics in practical application to ensure quality and distance. The last test assured step to ensure our products to be shipped with perfect package. 17

18 Copyright Fiberstore Optical Communication System Order Information Part Number SFP-10GSR-85 SFP-10GLRM-31 SFP-10GLR-31 SFP-10GER-55 SFP-10GZR-55 SFP-10GZRC-55 SFP-10GSR-85 SFP-10GLR-31 Description 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 10GBASE-ER SFP+ 1550nm 40km DOM Transceiver 10GBASE-ZR SFP+ 1550nm 80km DOM Transceiver 10GBASE-ZR SFP+1550nm 100km DOM Transceiver Dual-Rate 1000BASE-SX and 10GBASE-SR SFP+ 850nm 300m DOM Transceiver Dual-Rate 1000BASE-LX and 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver Note: Every transceiver is individually tested on corresponding equipment, walks through the testing challenges and 100% compatible with Cisco, Arista, Juniper, Dell, Brocade and other brands. Page 5 of 6 sales@fs.com 18 FS.COM

19 Copyright Fiberstore Optical Communication System Contact Us Fiberstore China Room 301, Third Floor, Weiyong Building, No. 10 Kefa Road, Nanshan District, Shenzhen, , China Tel: +86 (755) Fax: +86 (755) Fiberstore U.S. 331 Andover Park East Ste330, Tukwila, WA 98188, United States Tel: Fax: Fiberstore Hong Kong 1220 Tung Chun Commercial Centre, Shanghai Street, Kowloon, HongKong Tel: +(852) Fax: +(852) Fiberstore U.K. Third Floor 207 Regent Street, London, W1B 3HH, United Kingdom Tel: +44 (020) Addresses, phone number and fax number also have been listed at Please us at or call us for assistance. All statements, technical information, and recommendations related to the products here are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FS for more information. Fiber Optic Transceivers Copyright FS.COM All Rights Reserved.

Datasheet. 10GBASE-SR SFP+ 850nm 300m DOM Transceiver SFP-10GSR-85. Features. Application

Datasheet. 10GBASE-SR SFP+ 850nm 300m DOM Transceiver SFP-10GSR-85. Features. Application 10GBASE-SR SFP+ 850nm 300m DOM Transceiver SFP-10GSR-85 Features Hot-pluggable SFP+ footprint Supports 9.95 to 10.5 Gb/s bit rates Power dissipation < 1W RoHS-6 compliant (lead-free) Industrial temperature

More information

10G DWDM SFP+ 100GHz nm nm 80KM DOM Transceiver DWDM-SFP10G-80. Features

10G DWDM SFP+ 100GHz nm nm 80KM DOM Transceiver DWDM-SFP10G-80. Features 10G DWDM SFP+ 100GHz 1528.77nm-1563.86nm 80KM DOM Transceiver DWDM-SFP10G-80 Features Application Available in all C-Band Wavelengths on the 100GHz DWDM ITU Grid Duplex LC Connector Temperature-Stabilized

More information

Datasheet. 1000BASE-ZX SFP 1550nm 80km DOM Transceiver SFP1G-ZX-55. Features. Application

Datasheet. 1000BASE-ZX SFP 1550nm 80km DOM Transceiver SFP1G-ZX-55. Features. Application 1000BASE-ZX SFP 1550nm 80km DOM Transceiver SFP1G-ZX-55 Features Application Operating Data Rate up to 1.25Gbps 1550nm DFB Laser Transmitter 80km with 9/125 µm SMF Single 3.3V Power Supply and TTL Logic

More information

Product Specification. RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX1475D3BNV

Product Specification. RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX1475D3BNV Product Specification RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX1475D3BNV PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports rate selectable 1.25Gb/s and 9.95 to 10.5Gb/s

More information

Datasheet. 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31. Features. Application

Datasheet. 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31. Features. Application 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31 Features Application Fiber Channel Links Gigabit Ethernet Links Fast Ethernet Links Other Optical Links Operating data rate up to 1.25Gbps 1310nm

More information

Product Specification. RoHS-6 Compliant 10Gb/s Extended Temperature 10km Single Mode Datacom SFP+ Transceiver FTLX1471D3BNL

Product Specification. RoHS-6 Compliant 10Gb/s Extended Temperature 10km Single Mode Datacom SFP+ Transceiver FTLX1471D3BNL Product Specification RoHS-6 Compliant 10Gb/s Extended Temperature 10km Single Mode Datacom SFP+ Transceiver FTLX1471D3BNL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.95 to 10.5Gb/s bit rates

More information

FTLX1471D3BCV. Product Specification. RoHS-6 Compliant 1G/10G 10km Datacom SFP+ Transceiver FTLX1471D3BCV

FTLX1471D3BCV. Product Specification. RoHS-6 Compliant 1G/10G 10km Datacom SFP+ Transceiver FTLX1471D3BCV Product Specification RoHS-6 Compliant 1G/10G 10km Datacom SFP+ Transceiver FTLX1471D3BCV PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates

More information

40GBASE-PLR4 QSFP +1310nm 10km MTP/MPO Transceiver for SMF QSFP-PLR4-40G

40GBASE-PLR4 QSFP +1310nm 10km MTP/MPO Transceiver for SMF QSFP-PLR4-40G 40GBASE-PLR4 QSFP +1310nm 10km MTP/MPO Transceiver for SMF QSFP-PLR4-40G Features Hot-pluggable QSFP+ form factor Supports 4 independent streams of 10G Ethernet or OTN data Power dissipation < 2.5W RoHS-6

More information

Product Specification. RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL

Product Specification. RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL Product Specification RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.83 to 10.5Gb/s bit rates Power dissipation

More information

Product Specification

Product Specification Product Specification RoHS-6 Compliant 10Gb/s 10km Single Mode Bidirectional Datacom SFP+ Transceiver FTLX2071D327/FTLX2071D333 PRODUCT FEATURES Hot-pluggable SFP+ footprint Bidirectional 10G over single

More information

Product Specification

Product Specification Product Specification RoHS-6 Compliant CWDM 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX2471DC0xx PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.95 to 10.5Gb/s bit rates Power dissipation

More information

Product Specification. 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL APPLICATIONS

Product Specification. 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL APPLICATIONS Product Specification 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint 8.5 through 11.3 Gb/s bit rates 40km link length -40/85 C case temperature

More information

Datasheet. 10GBASE-T SFP+ Copper RJ-45 30m Transceiver SFP-10G-T. Features. Application

Datasheet. 10GBASE-T SFP+ Copper RJ-45 30m Transceiver SFP-10G-T. Features. Application 0GBASE-T SFP+ Copper RJ-45 30m Transceiver SFP-0G-T Features Hot-pluggable SFP footprint Support 0GBASE-T / 5GBASE-T / 2.5GBASE-T / 000BASE-T Compact RJ-45 connector assembly RoHS compliant and lead-free

More information

Product Specification Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLX1370W3BTL APPLICATIONS

Product Specification Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLX1370W3BTL APPLICATIONS Product Specification 9.8304 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLX1370W3BTL PRODUCT FEATURES Up to 9.8304 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital

More information

Product Specification

Product Specification Product Specification Extended Temperature 10Gb/s 850nm SFP+ Datacom Transceiver FTLX8574D3BNL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.95 to 10.5 Gb/s bit rates* Power dissipation < 1W

More information

Product Specification. RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom SFP+ Transceiver FTLX8571D3BCL

Product Specification. RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom SFP+ Transceiver FTLX8571D3BCL Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom SFP+ Transceiver FTLX8571D3BCL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.95 to 10.5 Gb/s bit rates* Power dissipation

More information

PROLABS SFP-10G-LR-C 10GBd SFP+ LR Transceiver

PROLABS SFP-10G-LR-C 10GBd SFP+ LR Transceiver PROLABS SFP-10G-LR-C 10GBd SFP+ LR Transceiver SFP-10G-LR-C Overview PROLABS s SFP-10G-LR-C SFP+ optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard, and provide

More information

Product Features. Applications. Standards Compliance. 10G SFP+ LR Transceiver. General Description

Product Features. Applications. Standards Compliance. 10G SFP+ LR Transceiver. General Description General Description Accelight ASP10I-LR is designed for use in 10 Gb/s links over single mode fibers(smf). It is compliant with the SFP+ MSA and industry standard SFF-8472. The module incorporates a 1310nm

More information

Product Specification. 10Gb/s 80km Single Mode SFP+ Transceiver FTLX1871D3BCL APPLICATIONS FTLX1871D3BCL

Product Specification. 10Gb/s 80km Single Mode SFP+ Transceiver FTLX1871D3BCL APPLICATIONS FTLX1871D3BCL Product Specification 10Gb/s 80km Single Mode SFP+ Transceiver FTLX1871D3BCL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s 80km link length -5/70 C case temperature range

More information

10GBd SFP+ LR Long Wavelength (1310nm) Transceiver

10GBd SFP+ LR Long Wavelength (1310nm) Transceiver CFORTH-SFP+-10G-LR Specifications Rev. Preliminary DATA SHEET CFORTH-SFP+-10G-LR 10GBd SFP+ LR Long Wavelength (1310nm) Transceiver CFORTH-SFP+-10G-LR Overview CFORTH-SFP+-10G-LR SFP+ optical transceivers

More information

10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver SFP-10G-BX40

10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver SFP-10G-BX40 Optical Communication System 10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver SFP-10G-BX40 Features Application 10GBASE-ER at 10.3125Gbps 10GBASE-EW at 9.953Gbps OBSAI rates 6.144 Gb/s, 3.072 Gb/s,

More information

PROLABS EX-SFP-10GE-LR-C

PROLABS EX-SFP-10GE-LR-C PROLABS EX-SFP-10GE-LR-C 10GBd SFP+ LR Transceiver EX-SFP-10GE-LR-C Overview PROLABS s EX-SFP-10GE-LR-C SFP+ optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard,

More information

Datasheet. 10G CWDM SFP+ 1350nm~1610nm 20km Transceiver for SMF CWDM-SFP10G-20L. Features. Application

Datasheet. 10G CWDM SFP+ 1350nm~1610nm 20km Transceiver for SMF CWDM-SFP10G-20L. Features. Application 10G CWDM SFP+ 1350nm~1610nm 20km Transceiver for SMF CWDM-SFP10G-20L Features Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-Pluggable SFP+ Footprint 14-Wavelengths CWDM DFB Transmitter from 1350nm to 1610nm,

More information

Datasheet. 10G CWDM SFP+ 1270nm~1450nm 40km Transceiver for SMF CWDM-SFP10G-40S. Features. Application

Datasheet. 10G CWDM SFP+ 1270nm~1450nm 40km Transceiver for SMF CWDM-SFP10G-40S. Features. Application 10G CWDM SFP+ 1270nm~1450nm 40km Transceiver for SMF CWDM-SFP10G-40S Features Hot-Pluggable SFP+ Footprint 10-Wavelengths CWDM DFB Transmitter from 1270nm to 1450nm, with step 20nm 14dB Power Budget Duplex

More information

Prolabs SFP-10G-LRM. Datasheet: Transceivers. 10GBd SFP+ LRM Transceiver. Ordering Information. Introduction. Ordering Information SFP-10G-LRM

Prolabs SFP-10G-LRM. Datasheet: Transceivers. 10GBd SFP+ LRM Transceiver. Ordering Information. Introduction. Ordering Information SFP-10G-LRM Prolabs SFP-10G-LRM 10GBd SFP+ LRM Transceiver Key Features Up to 10.5 GBd bi-directional data links Compliant with IEEE 802.3aq 10GBASE-LRM Compliant with SFF8431 Hot-pluggable SFP+ footprint 1310nm FP

More information

SFP-1020-WA/B 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX

SFP-1020-WA/B 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX SFP-1020-WA/B 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Features Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver

More information

Product Specification. 10Gb/s Multi-Rate, 10km Single Mode SFP+ Transceiver FTLX1472M3BTL

Product Specification. 10Gb/s Multi-Rate, 10km Single Mode SFP+ Transceiver FTLX1472M3BTL Product Specification 10Gb/s Multi-Rate, 10km Single Mode SFP+ Transceiver FTLX1472M3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint Up to 10km link length 6.14, 8.5 & 9.83 through 11.3 Gb/s -40 to 85

More information

Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver

Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 10.5Gb/s bit rates Power dissipation

More information

10GBd SFP+ Short Wavelength (850nm) Transceiver

10GBd SFP+ Short Wavelength (850nm) Transceiver Preliminary DATA SHEET CFORTH-SFP+-10G-SR 10GBd SFP+ Short Wavelength (850nm) Transceiver CFORTH-SFP+-10G-SR Overview CFORTH-SFP+-10G-SR SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae

More information

Product Specification. 6.1 Gb/s Short-Wavelength SFP+ Transceiver FTLF8526P3BNL

Product Specification. 6.1 Gb/s Short-Wavelength SFP+ Transceiver FTLF8526P3BNL Product Specification 6.1 Gb/s Short-Wavelength SFP+ Transceiver FTLF8526P3BNL PRODUCT FEATURES Up to 6.1 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic functions

More information

PROLABS J9150A-C 10GBd SFP+ Short Wavelength (850nm) Transceiver

PROLABS J9150A-C 10GBd SFP+ Short Wavelength (850nm) Transceiver PROLABS J9150A-C 10GBd SFP+ Short Wavelength (850nm) Transceiver J9150A-C Overview PROLABS s J9150A-C SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard, and

More information

10G DWDM SFP+ 100GHz nm nm 80KM DOM Transceiver DWDM-SFP10G-80. Features

10G DWDM SFP+ 100GHz nm nm 80KM DOM Transceiver DWDM-SFP10G-80. Features 10G DWDM SFP+ 100GHz 1528.77nm-1563.86nm 80KM DOM Transceiver DWDM-SFP10G-80 Features Application Available in all C-Band Wavelengths on the 100GHz DWDM ITU Grid Duplex LC Connector Temperature-Stabilized

More information

Product Specifications. 10Gb/s, 1310nm 40km, Single Mode, Multi-Rate SFP+ Transceiver FTLX1772M3BCL FTLX1772M3BCL

Product Specifications. 10Gb/s, 1310nm 40km, Single Mode, Multi-Rate SFP+ Transceiver FTLX1772M3BCL FTLX1772M3BCL Product Specifications 10Gb/s, 1310nm 40km, Single Mode, Multi-Rate SFP+ Transceiver FTLX1772M3BCL PRODUCT FEATURES Hot-pluggable SFP+ footprint 17dB optical link budget for up to 40km (1) over G.652 single

More information

10G DWDM SFP+ 50GHz nm nm 40KM DOM Transceiver DWDM-SFP10G-40. Features

10G DWDM SFP+ 50GHz nm nm 40KM DOM Transceiver DWDM-SFP10G-40. Features 10G DWDM SFP+ 50GHz 1528.77nm-1563.86nm 40KM DOM Transceiver DWDM-SFP10G-40 Features Application Available in all C-Band Wavelengths on the 50GHz DWDM ITU Grid Duplex LC Connector Temperature-Stabilized

More information

PRODUCT DATASHEET. 10Gb/s 1310nm SFP+ 10km Transceiver PART NUMBER: SFPPT-LR1-01 PRODUCT FEATURES APPLICATIONS.

PRODUCT DATASHEET. 10Gb/s 1310nm SFP+ 10km Transceiver PART NUMBER: SFPPT-LR1-01 PRODUCT FEATURES APPLICATIONS. PART NUMBER: SFPPT-LR1-01 PRODUCT FEATURES Up to 11.1Gbps Data Links Up to 10km transmission on SMF DFB Laser and PIN receiver Metal enclosure, for lower EMI 2-wire interface with integrated Digital Diagnostic

More information

10Gb/s CWDM SFP+ 80km Transceiver

10Gb/s CWDM SFP+ 80km Transceiver PRODUCT FEATURES 10Gb/s CWDM SFP+ 80km Transceiver Up to 11.1Gbps Data Links Up to 80km transmission on SMF Power dissipation < 1.5W CWDM EML Laser and APD receiver Metal enclosure, for lower EMI 2-wire

More information

XFP-10GLR-OC192SR-C. 10 Gigabit XFP Transceiver, LC Connectors, 1310nm, SingleMode Fiber 10km

XFP-10GLR-OC192SR-C. 10 Gigabit XFP Transceiver, LC Connectors, 1310nm, SingleMode Fiber 10km PROLABS XFP-10GLR-OC192SR-C 10 Gigabit 1310nm SingleMode XFP Optical Transceiver XFP-10GLR-OC192SR-C Overview ProLabs s XFP-10GLR-OC192SR-C 10 GBd XFP optical transceivers are designed for the IEEE 802.3ae

More information

SFP-10GD-LR-TP 10Gb/s 1310nm Single-mode SFP+ Transceiver

SFP-10GD-LR-TP 10Gb/s 1310nm Single-mode SFP+ Transceiver SFP-10GD-LR-TP 10Gb/s 1310nm Single-mode SFP+ Transceiver PRODUCT FEATURES 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR. 1310nm DFB transmitter, PIN photo-detector Up to 10km transmission

More information

Parameter Symbol Min Typ Max Unit Remarks Data Rate DR GBd IEEE 802.3ae Bit Error Rate BER Input Voltage V CC

Parameter Symbol Min Typ Max Unit Remarks Data Rate DR GBd IEEE 802.3ae Bit Error Rate BER Input Voltage V CC SFP-10G-ER The SFP-10G-ER is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed

More information

MODULETEK SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview.

MODULETEK SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview. DATA SHEET MODULETEK SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview ModuleTek s SFP10-CWDM-DML-xxxx-20KM-15DB-D10 SFP+ CWDM 20km optical

More information

1000BASE-BX SFP+ 1490nmTX/1310nmRX 20km DOM Transceiver SFP-GE-BX Features

1000BASE-BX SFP+ 1490nmTX/1310nmRX 20km DOM Transceiver SFP-GE-BX Features 1000BASE-BX SFP+ 1490nmTX/1310nmRX 20km DOM Transceiver Features Application Switch to Switch Interface Fast Ethernet Switched Backplane Applications Router/Server Interface Other Optical Links Operating

More information

Product Specification. RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8511D3

Product Specification. RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8511D3 Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8511D3 PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 10.5Gb/s bit rates Power dissipation

More information

GBP-XXXX192-L2C 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX

GBP-XXXX192-L2C 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX GBP-XXXX192-L2C 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Features Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver

More information

PROLABS GP-10GSFP-1S-C 10GBd SFP+ Short Wavelength (850nm) Transceiver

PROLABS GP-10GSFP-1S-C 10GBd SFP+ Short Wavelength (850nm) Transceiver PROLABS GP-10GSFP-1S-C 10GBd SFP+ Short Wavelength (850nm) Transceiver GP-10GSFP-1S-C Overview PROLABS s GP-10GSFP-1S-C SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF

More information

10Gb/s 1550nm SFP+ 40kmTransceiver

10Gb/s 1550nm SFP+ 40kmTransceiver PRODUCT FEATURES 10Gb/s 1550nm SFP+ 40kmTransceiver Up to 11.1Gbps Data Links Up to 40km transmission on SMF EML transmitter and PIN receiver Metal enclosure, for lower EMI 2-wire interface with integrated

More information

Features. Application. Datasheet. 1000BASE-EX SFP 1550nm 40km DOM Transceiver SFP1G-EX-55

Features. Application. Datasheet. 1000BASE-EX SFP 1550nm 40km DOM Transceiver SFP1G-EX-55 1000BASE-EX SFP 1550nm 40km DOM Transceiver SFP1G-EX-55 Features Application Operating Data Rate up to 1.25Gbps 1550nm DFB Laser Transmitter 40km with 9/125 µm SMF Single 3.3V Power Supply and TTL Logic

More information

Product Specification. 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCV

Product Specification. 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCV Product Specification 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCV PRODUCT FEATURES Up to 14.025 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic

More information

Prolabs CWDM-SFP8G-ER-xxxx

Prolabs CWDM-SFP8G-ER-xxxx Prolabs CWDM-SFP8G-ER-xxxx 8 Gigabit Fibre Channel 40km CWDM SFP+ Transceiver Key Features Compliant with 8G/4G/2G Fibre Channel Compliant with SFF8431 Hot-pluggable SFP+ footprint Temperature-stabilized

More information

Product Specification. RoHS-6 Compliant Industrial Temperature 10Gb/s 10km XFP Optical Transceiver FTLX1412D3BTL

Product Specification. RoHS-6 Compliant Industrial Temperature 10Gb/s 10km XFP Optical Transceiver FTLX1412D3BTL Product Specification RoHS-6 Compliant Industrial Temperature 10Gb/s 10km XFP Optical Transceiver FTLX1412D3BTL PRODUCT FEATURES Supports 9.95Gb/s to 10.5Gb/s bit rates Industrial temperature range: -40

More information

XTBxxA-20LY 10 Gbps SFP+ Bi-Directional Transceiver, 20 km Reach

XTBxxA-20LY 10 Gbps SFP+ Bi-Directional Transceiver, 20 km Reach XTBxxA-20LY 10 Gbps SFP+ Bi-Directional Transceiver, 20 km Reach 1270/1330 nm TX/1330/1270 nm RX Features: Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver

More information

10Gb/s 10km Datacom XFP Optical Transceiver XFP-10G-LR

10Gb/s 10km Datacom XFP Optical Transceiver XFP-10G-LR 10Gb/s 10km Datacom XFP Optical Transceiver PRODUCT FEATURES XFP-10G-LR Supports 9.95Gb/s to 10.5Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km RoHS-6 compliant (lead-free) Power

More information

Product Specification. 8 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1428P3BNV

Product Specification. 8 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1428P3BNV Product Specification 8 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1428P3BNV PRODUCT FEATURES Up to 8.5 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic

More information

Lightem LSFP+BDxxx-LM20 Series 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX

Lightem LSFP+BDxxx-LM20 Series 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Lightem LSFP+BDxxx-LM0 Series 0Gbps SFP+ Bi-Directional Transceiver, 0km Reach 70/330 TX / 330/70 RX The LSFP+BDxxx-LM0 series single mode transceiver is small form factor pluggable module for duplex optical

More information

PROLABS DS-SFP-FC8G-LW-C 8GBd Long Wavelength SFP+ Transceiver

PROLABS DS-SFP-FC8G-LW-C 8GBd Long Wavelength SFP+ Transceiver PROLABS DS-SFP-FC8G-LW-C 8GBd Long Wavelength SFP+ Transceiver DS-SFP-FC8G-LW-C Overview PROLABS s DS-SFP-FC8G-LW-C SFP+ optical transceivers are based on 8G Fiber Channel standard, and provide a quick

More information

BCHP D-H3 10Gb/s 1310nm SFP+ 10km Transceiver

BCHP D-H3 10Gb/s 1310nm SFP+ 10km Transceiver BCHP-1396-10D-H3 10Gb/s 1310nm SFP+ 10km Transceiver PRODUCT FEATURES Up to 11.1Gbps Data Links Up to 10km transmission on SMF DFB Laser and PIN receiver Metal enclosure, for lower EMI 2-wire interface

More information

XFP-10GER-192IR V Operating Environment Supply Voltage 1.8V V CC V Operating Environment Supply Current 1.8V I CC1.

XFP-10GER-192IR V Operating Environment Supply Voltage 1.8V V CC V Operating Environment Supply Current 1.8V I CC1. XFP-10GER-192IR The XFP-10GER-192IRis programmed to be fully compatible and functional with all intended CISCO switching devices. This XFP optical transceiver is designed for IEEE 802.3ae 10GBASE-ER, 10GBASE-

More information

10GBASE-BX SFP+ 1330nmTX/1270nmRX 80km DOM Transceiver SFP-10G-BX80

10GBASE-BX SFP+ 1330nmTX/1270nmRX 80km DOM Transceiver SFP-10G-BX80 10GBASE-BX SFP+ 1330nmTX/1270nmRX 80km DOM Transceiver SFP-10G-BX80 Features Application Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-pluggable SFP+ footprint Single LC for Bi-directional Transmission Maximum

More information

Product Specification Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1426P2BTL

Product Specification Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1426P2BTL a r Product Specification 6.144 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1426P2BTL PRODUCT FEATURES Up to 6.144 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital

More information

Features. Application. Datasheet. 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31

Features. Application. Datasheet. 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31 1000BASE-SX SFP 1310nm 2km DOM Transceiver SFP1G-SX-31 Features Application Fiber Channel Links Gigabit Ethernet Links Fast Ethernet Links Other Optical Links Operating data rate up to 1.25Gbps 1310nm

More information

Product Specification. 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCE

Product Specification. 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCE Product Specification 16GFC RoHS Compliant Long-Wavelength SFP+ Transceiver FTLF1429P3BCE PRODUCT FEATURES Up to 14.025 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic

More information

Product Specification. RoHS-6 Compliant 10Gb/s 10km Datacom XFP Optical Transceiver FTLX1412D3BCL

Product Specification. RoHS-6 Compliant 10Gb/s 10km Datacom XFP Optical Transceiver FTLX1412D3BCL Product Specification RoHS-6 Compliant 10Gb/s 10km Datacom XFP Optical Transceiver FTLX1412D3BCL PRODUCT FEATURES Supports 9.95Gb/s to 10.5Gb/s bit rates Power dissipation

More information

10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver

10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver 10GBASE-BX SFP+ 1270nmTX/1330nmRX 40km DOM Transceiver SFP-10G-BX40 Features Operating data rate up to 11.3Gbps Two types: A: 1270nm DFB Transmitter/ 1330nm Receiver B: 1330nm DFB Transmitter/ 1270nm Receiver

More information

SFP-10GCWZR-xx-TP 10Gb/s CWDM SFP+ 80km Transceiver

SFP-10GCWZR-xx-TP 10Gb/s CWDM SFP+ 80km Transceiver PRODUCT FEATURES SFP-10GCWZR-xx-TP 10Gb/s CWDM SFP+ 80km Transceiver Up to 11.1Gbps Data Links Up to 80km transmission on SMF Power dissipation < 1.5W CWDM EML Laser and APD receiver Metal enclosure, for

More information

Product Specification. Industrial Temperature Range 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8512D3BTL

Product Specification. Industrial Temperature Range 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8512D3BTL Product Specification Industrial Temperature Range 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver FTLX8512D3BTL PRODUCT FEATURES Hot-pluggable XFP footprint Supports 8.5Gb/s and 9.95 through 10.5

More information

10GBASE-LR/LW SFP MSA SFF-8472 SFF-8431 SFF-8432 Compliant

10GBASE-LR/LW SFP MSA SFF-8472 SFF-8431 SFF-8432 Compliant APSPBxxB33CDL60 Product Features Single LC connector Hot-pluggable SFP footprint Uncooled DFB laser RoHS compliant and Lead Free Distance up to 60Km on 9/125um SMF Metal enclosure for lower EMI Power dissipation

More information

Part Number Operating Case temperature DDMI. ESD to the Electrical PINs: compatible with MIL-STD-883 Method 3015

Part Number Operating Case temperature DDMI. ESD to the Electrical PINs: compatible with MIL-STD-883 Method 3015 APSP31B33xDL10 Product Features Duplex LC connector Hot-pluggable SFP footprint Uncooled 1310nm DFB laser RoHS compliant and Lead Free Distance up to 10Km on 9/125um SMF Metal enclosure for lower EMI Power

More information

DATA SHEET. MODULETEK: SFP10-CWDM-DML-xxxx-20KM-15DB-D10. 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview

DATA SHEET. MODULETEK: SFP10-CWDM-DML-xxxx-20KM-15DB-D10. 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview DATA SHEET MODULETEK: SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview ModuleTek s SFP10-CWDM-DML-xxxx-20KM-15DB-D10 SFP+ CWDM 20km optical

More information

FTLX14. 10Gb/s 10km. Datacom. Product. bit rates* -5 C to 75 C APPLICATIONS. of 10km Uncooled. 10G Fibre. Channel 10G CPRI. Small Form comply with

FTLX14. 10Gb/s 10km. Datacom. Product. bit rates* -5 C to 75 C APPLICATIONS. of 10km Uncooled. 10G Fibre. Channel 10G CPRI. Small Form comply with F i n i s a r Product Specification 10Gb/s 10km Datacom XFP Optical Transceiver FTLX1413D3BCL PRODUCT FEATURES Supports 8.5Gb/s to 10.5Gb/s bit rates* Power dissipation

More information

SFP+ 1 ETU-LINK. Applications. Standard. Optical Communication System ESP3192-3LCD2. 10Gbps 1310nm MM 2KM SFP+ Optical Transceiver

SFP+ 1 ETU-LINK. Applications. Standard. Optical Communication System ESP3192-3LCD2. 10Gbps 1310nm MM 2KM SFP+ Optical Transceiver 1 ETU-LINK SFP+ Optical Communication System ESP3192-3LCD2 10Gbps 1310nm MM 2KM SFP+ Optical Transceiver Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431

More information

Datasheet. 40GBASE-LR4L QSFP+ 1310nm 2km LC Transceiver for SMF QSFP-IR4-40G. Features. Application

Datasheet. 40GBASE-LR4L QSFP+ 1310nm 2km LC Transceiver for SMF QSFP-IR4-40G. Features. Application 40GBASE-LR4L QSFP+ 1310nm 2km LC Transceiver for SMF QSFP-IR4-40G Features Application Hot Pluggable QSFP+ form factor Supports 41.2 Gb/s aggregate bit rates Power dissipation

More information

XFP-10G-Z-OC192-LR2-C

XFP-10G-Z-OC192-LR2-C PROLABS XFP-10G-Z-OC192-LR2-C 10 Gigabit 1550nm Single Mode XFP Optical Transceiver XFP-10G-Z-OC192-LR2-C Overview PROLABS s XFP-10G-Z-OC192-LR2-C 10 GBd XFP optical transceivers are designed for 10GBASE-ZR,

More information

PROLABS JD121B-C. 10 Gigabit 1550nm SingleMode XFP Optical Transceiver, 40km Reach.

PROLABS JD121B-C. 10 Gigabit 1550nm SingleMode XFP Optical Transceiver, 40km Reach. PROLABS JD121B-C 10 Gigabit 1550nm SingleMode XFP Optical Transceiver, 40km Reach. JD121B-C Overview PROLABS s JD121B-C 10 GBd XFP optical transceivers are designed for the IEEE 802.3ae 10GBASE-ER, 10GBASE-

More information

Product Specification. RoHS-6 Compliant 10Gb/s 220m Multi Mode Datacom SFP+ Transceiver FTLX1371D3BCL FTLX1371D3BCL

Product Specification. RoHS-6 Compliant 10Gb/s 220m Multi Mode Datacom SFP+ Transceiver FTLX1371D3BCL FTLX1371D3BCL Product Specification RoHS-6 Compliant 10Gb/s 220m Multi Mode Datacom SFP+ Transceiver FTLX1371D3BCL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 10.3Gb/s bit rate Power dissipation < 1W RoHS-6

More information

Features. Applications. Description. Absolute Maximum Ratings

Features. Applications. Description. Absolute Maximum Ratings Features - Compliant with SFF-8413 and IEE802.3ae - Data rate selectable 4.25Gbps or 9.95Gbps to 10.52Gbps bit rates - Uncooled DFP-1310 Transmitter and PIN Receiver - Link length up to 10km - Low Power

More information

Product Specification

Product Specification Product Specification 10Gb/s DWDM 80km Multi-Rate SFP+ Transceiver FTLX3871MCCxx PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s Up to 80km link length 100 GHz channel

More information

Product Specification

Product Specification Product Specification 8.5 Gb/s Short-Wavelength SFP+ Transceiver FTLF8528P3BxV PRODUCT FEATURES Up to 8.5 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic functions

More information

Ⅲ Optical Characteristics (T OP = -5 to 85, VCC = 3.14 to 3.46 Volts) Parameter Symbol Min Typ Max Unit Ref. Transmitter Output Opt. Pwr POUT -6-1 dbm

Ⅲ Optical Characteristics (T OP = -5 to 85, VCC = 3.14 to 3.46 Volts) Parameter Symbol Min Typ Max Unit Ref. Transmitter Output Opt. Pwr POUT -6-1 dbm Ⅰ Absolute Maximum Ratings Parameter Symbol Min Typ Max Unit Ref. Maximum Supply Voltage Vcc -0.5 4.7 V Storage Temperature TS -40 85 C Case Operating Temperature Tcase -5 85 C Ⅱ Electrical Characteristics

More information

SFP-10G-LR-TX. Product Features. Applications. Product Selection. Cisco Compatible 10GBase-LR SFP TurboX

SFP-10G-LR-TX. Product Features. Applications. Product Selection. Cisco Compatible 10GBase-LR SFP TurboX Product Features Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection DFB Transmitter and PIN Receiver Distance up to 10Km on 9/125um SMF Single 3.3V power supply and

More information

Product Specification

Product Specification Product Specification 10Gb/s DWDM 40km Multi-Rate Tunable SFP+ Transceiver FTLX6672MCC PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s Up to 40km link length 50GHz ITU-based

More information

10Gb/s 850nm Multimode SFP+ Transceiver

10Gb/s 850nm Multimode SFP+ Transceiver VER 1.0 / 060217 SFP-10GB-SR 10Gb/s 850nm Multimode SFP+ Transceiver Feature Hot-pluggable SFP+ footprint Supports 9.95 to 10.3 Gb/s bitrates* Power dissipation < 1W RoHS-6 compliant (lead-free) ommercial

More information

10Gbps 1550nm 80KM SFP+ Optical Transceiver

10Gbps 1550nm 80KM SFP+ Optical Transceiver 10Gbps 1550nm 80KM SFP+ Optical Transceiver Model: JFSP5592-3LCD80 Size (mm): 58.4*13.9*12.6 Features Hot pluggable 1550nm cooled EML, APD Receiver Up to 80km on 9/125um SMF SFP+ MSA package with duplex

More information

XBR C. 8Gbs SFP+ Transceiver

XBR C. 8Gbs SFP+ Transceiver XBR-000153-C Brocade 8GBase-LR SFP+ SMF 1310nm, 10km Reach, LC XBR-000153-C 8Gbs SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent ESD protection DFB Transmitter

More information

Product Specification

Product Specification PRODUCT FEATURES Product Specification 25G SFPwire, SFP+ Active Optical Cable FCBG125SD1Cxx Hot-pluggable SFP+ cable ends Supports 25.7813 Gb/s bit rate SFI limiting interface Input equalization and output

More information

Product Specification. Short-Wavelength Pluggable SFP Transceiver FTRJ D

Product Specification. Short-Wavelength Pluggable SFP Transceiver FTRJ D Product Specification Short-Wavelength Pluggable SFP Transceiver FTRJ-8519-7D PRODUCT FEATURES Up to 1.25 Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions

More information

Product Specification. 3.7 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver FTLF8524P3BNL

Product Specification. 3.7 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver FTLF8524P3BNL Product Specification 3.7 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver FTLF8524P3BNL PRODUCT FEATURES Up to 3.7 Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic

More information

OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver

OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions Uncooled 1550nm

More information

Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS

Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS Product Features Compliant with IEEE Std 802.3-2005 10G Ethernet 10GBase-LR/LW Electrical interface specifications per SFF-8431 Management interface specifications per SFF-8431 and SFF-8472 SFP+ MSA package

More information

1.25GBd SFP (Small Form Pluggable) Long Wavelength (1550nm) Transceiver

1.25GBd SFP (Small Form Pluggable) Long Wavelength (1550nm) Transceiver Preliminary DATA SHEET CFORTH-SFP-ZX-D 1.25GBd SFP (Small Form Pluggable) Long Wavelength (1550nm) Transceiver CFORTH-SFP-ZX-D Overview CFORTH-SFP-ZX-D SFP optical transceivers are based on Gigabit Ethernet

More information

Features: Applications: Description:

Features: Applications: Description: Monolithic MZM Tunable TOSA APD Receiver Supports 50GHz ITU Grid C-Band with a wavelength locker Duplex LC connector Power supply voltages : +3.3V Temperature range 0 C to 70 C Power dissipation:

More information

Features: Compliance: Applications: Warranty: QFX-SFP-10GE-LR-GT SFP+ 10GBASE-LR 10GB 1310nm 10km Juniper QFX Compatible

Features: Compliance: Applications: Warranty: QFX-SFP-10GE-LR-GT SFP+ 10GBASE-LR 10GB 1310nm 10km Juniper QFX Compatible The GigaTech Products is programmed to be fully compatible and functional with all intended JUNIPER switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed

More information

Parameter Symbol Min Typ Max Unit Remarks Data Rate DR 1.25 GBd IEEE Bit Error Rate BER Input Voltage V CC

Parameter Symbol Min Typ Max Unit Remarks Data Rate DR 1.25 GBd IEEE Bit Error Rate BER Input Voltage V CC GLC-BX-U The GLC-BX-U is programmed to be fully compatible and functional with all intended Cisco Series switching devices. This SFP optical transceiver is designed for IEEE 802.3 Gigabit Ethernet interconnects

More information

SFP-10G-SR Specifications, R01. SFP-10G-SR-OEM 10GBd SFP+ Short Wavelength (850nm) Transceiver

SFP-10G-SR Specifications, R01. SFP-10G-SR-OEM 10GBd SFP+ Short Wavelength (850nm) Transceiver SFP-10G-SR-OEM 10GBd SFP+ Short Wavelength (850nm) Transceiver Up to 10.5 GBd bi-directional data links Compliant with IEEE 802.3ae 10GBASE-SR/SW Compliant with SFF8431 Hot-pluggable SFP+ footprint 850nm

More information

Product Specification. FWLF1625P2Lxx

Product Specification. FWLF1625P2Lxx Product Specification 4.25 Gigabit RoHS Compliant CWDM SFP Transceiver FWLF1625P2Lxx PRODUCT FEATURES Up to 4.25 Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions

More information

Modulelink(Shenzhen) Technology Co., Ltd. XFP 10G Transceiver M10G-XFP-DWDM-80D

Modulelink(Shenzhen) Technology Co., Ltd. XFP 10G Transceiver M10G-XFP-DWDM-80D XFP 10G Transceiver M10G-XFP-DWDM-80D PRODUCT FEATURES Supports 9.95Gb/s to 11.3Gb/s bit rates Power dissipation

More information

Parameter Symbol Min Max Unit Storage Temperature T ST Case Operating Tempature Tc Supply Voltage V CC V

Parameter Symbol Min Max Unit Storage Temperature T ST Case Operating Tempature Tc Supply Voltage V CC V Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 40km over Single mode fiber 1310nm DFB laser transmitter. Duplex

More information

Product Specification

Product Specification PRODUCT FEATURES Product Specification 25G SFPwire SFP28 Active Optical Cable FCCG125SD1Cxx Hot-pluggable SFP28 cable ends Supports 25.7813 Gb/s bit rate Connectivity Diagnostics SFI limiting interface

More information

Part Number Wavelength Operating Case temperature. APCSP23B33CDL10 Tx-1270 / Rx-1330 Commercial. APCSP32B33CDL10 Tx-1330 / Rx-1270 Commercial

Part Number Wavelength Operating Case temperature. APCSP23B33CDL10 Tx-1270 / Rx-1330 Commercial. APCSP32B33CDL10 Tx-1330 / Rx-1270 Commercial APCSPxxB33xDL10 Product Features Two Bi-Directional transceivers in one SFP package Up to 10.3125Gb/s data links Duplex LC connector Hot-pluggable SFP footprint Uncooled DFB laser transmitter RoHS compliant

More information

ProLabs LX-SFP-1G-C 1.25GBd SFP (Small Form Pluggable) Long Wavelength (1310nm) Transceiver

ProLabs LX-SFP-1G-C 1.25GBd SFP (Small Form Pluggable) Long Wavelength (1310nm) Transceiver ProLabs LX-SFP-1G-C 1.25GBd SFP (Small Form Pluggable) Long Wavelength (1310nm) Transceiver GLC-LH-SMD-C Overview ProLabs s LX-SFP-1G-C SFP optical transceivers are based on Gigabit Ethernet IEEE 802.3

More information

Product Specification

Product Specification Product Specification 10Gb/s DWDM 80km Multi-Rate Tunable SFP+ Transceiver FTLX6871MCC and FTLX6872MCC PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s Up to 80km link length

More information