PSI5: Safety & latest developments

Size: px
Start display at page:

Download "PSI5: Safety & latest developments"

Transcription

1 Vector Congress 2016 PSI5: Safety & latest developments Juan Pontes, Robert Bosch GmbH

2 Vehicle as networking platform Networking between different systems in the vehicle Networking between different vehicles Networking between vehicle and infrastructure Page 2

3 Overview of wired interfaces Networking between different systems in the vehicle Digital UART/USART RS-485 RS-232 PWM SENT Automotive digital Peripheral device interfaces Main bus interfaces Voltage Current On-board (ECU) sensor Interfaces USB I 2 C SPI LIN PSI5 DSI3 CAN Flexray 100Base-T1 Analog Page 3

4 Overview of automotive wired digital interfaces Sensors & Embedded Control 1G 100M Data rates [bit/s] 10M 1M 100k 10k SENT LIN 3-wire 3-wire DSI3 PSI5 2-wire 2-wire SPI 6-wire I2C 4-wire CAN FD CAN high 3/4-wire CAN low 3/4-wire FlexRay wire/optical Implementation costs Page 4

5 Evolution of PSI5 Standard Focus on Airbag Systems Autoliv Bosch Continental Siemens VDO PAS3 / PAS4 only asynchron Peer 2Peer PEGASUS synchron, Bus capability PSI5 V1.2 June 2007 open Standard PSI5 V1.3 June2008 open Standard Focus extended on Powertrain and Chassis PSI5 V2.0 June 2011 V2.1 October 2012 V2.2 August 2016 Page 5

6 PSI5 Governing body Page 6

7 PSI5 specification structure Application specific substandard - Airbag - Chassis and Safety - Powertrain + Base standard Latest release v2.2 (August 2016) Page 7

8 Basic functionality Sensor Data communication with Manchester-Coding - high Data Rate with 125kbit/s (commercial options: 83kbit/s, 189kbit/s) - flexible Payload Range (10 28bit) with Parity or 3bit CRC Different bus topologies possible asynchron Peer2Peer transmission synchronized Master-Slave Bus communication Parallelbus Daisy-Chain Page 8

9 Basic implementation Physical layer Simple & safe circuitry Twisted pair cable Specified I/F networks for maximum flexibility and compatibility Page 9

10 PSI5 interface requirements Costs - Cost efficient components - Cable and Harness - Low weight, little required space, low power Functionality - Flexible system fulfilling different needs and applications - Scalable and extendable (for different data rates) Safety - Reduced emmision - Signal robustness - Error handling Availability - Allows reuse/adaptation of existing developments for/in automotive - Keeps being mantained Robustness - Stable networking, fast start- up - Data availability Page 10

11 PSI5 physical layer scope for safety & robustness uc Receiver Cable Sensor sync generation sensor supply receiver logic receiver (external interface supply, control logic, ) PSI5 data Control and timing supply shift register sensor (see of gates, mechanic, analog, ) depends partly on specific implementation PSI5 GND depends partly on specific implementation proposed scope of PSI5 safety consideration within PSI5 consortium Measures for data reliability Simple robust circuit Twisted pair cable (recommendation) Large SNR (determines raw failure rate ) Page 11

12 PSI5 data link layer scope for safety & robustness NRZ Manchester 1st half bit 2nd half bit evaluation by receiver 0 0 detected failure 0 1 data bit = '0' 1 0 data bit = '1' 1 1 detected failure Non Return to Zero Simple receiver / Manchester decoder with over-sampling factor 2 Redundant Transmission Measures for data reliability Manchester encoded signal (corresponds to full redundant data transmission) pre-defined start bit pattern failure detection by parity check / CRC check (cyclic redundancy check code) gap bit (defined period of no transmission) Page 12

13 PSI5 safety concept Error probability P E error Probability of Halfbits P RES residual frame error probability P RES, Sys Residual system error probability physical data link application Signal distortion half bit errors bit errors frame errors random and systematic faults system errors residual system failure current modulation, deterministic timing Manchester Encoding start bits, frame gap, parity/crc error frames, initialization sequence signal plausibility, redundant sensors, oversampling PSI5 interface specification Page 13

14 Aspects of functional safety in system context P RES : Residual error probability for one undetected corrupted data word System goal? What is critical on system level? Final judgement on safety goals can only be done on system level: residual failures regarding the LSBs might not be significant Are there plausibility checks with other sensor signals? How many subsequent data words cause a system failure? Have filtering methods been implemented to supress wrong data? Is oversampling being used? further improvement of data reliability on system level Page 14

15 ISO26262 Fault Model and Failure Modes fault systematic fault random fault random hardware fault random environmental fault A systematic fault is a fault whose failure is manifested in a deterministic way that can only be prevented by applying process or design measures design and safety measures of PSI5 interface A random fault can occur unpredictably during the lifetime of a hardware element and follows a probability distribution Implementation specific consideration necessary Source: ISO26262, BL18 FDIS Page 15

16 Systematic Failures within PSI5 Interface electric faults mechanic faults operation faults design faults resistive (incl. short/ open), inductive and capacitive errors wrong voltage and/or current levels wrong timing for single bits, frames or sync periods detection Manchester decoding parity/crc, start/stop-bits deterministic data* Systematic failures can be safely detected by means of PSI5 specification on system level *) Within the design of a PSI5 interconnection, it is predefined which data must be available (deterministic), missing data should be handled on system level. Page 16

17 Random (Env.) Failures within PSI5 Interface burst continious noise S1 S0 D0 Dn P S1 S0 D0 Dn P sinosidal S1 S0 D0 Dn P S1 S0 D0 Dn P offset S1 S0 D0 Dn P S1 S0 D0 Dn P Error models to evaluate PSI5 robustness have been investigated PSI5 capable withstanding all different error types. Page 17

18 Residual error rate with gaussian noise 10-2 P E 1 u = SNR = erfc Q bit error probability P E Manch (10 bit) 10 bit P 20 bit CRC SNR [db] Residual error probability <10-14 for SNR >14dB Comparable results for 10bit parity and 20bit CRC frames for SNR > 8dB Page 18

19 Safety overview PSI5 interface provides means for systematic error detection and avoidance The PSI5 interface shows very high data reliability residual error probability <10-14 for SNR >14dB system design defines raw bit error rate P E parity check sufficient for small data words, CRC recommended for large data frames 10bit parity and 20bit CRC frames have comparable P RES for SNR > 8dB Presented methods and argumentations support conformity considerations regarding ISO26262 for systems rated up to ASIL D. Page 19

20 Influence of disturbances on PSI5 signal For standard signal levels ( I S =22 30mA) typical noise distortions (Gaussian type, as considered) are uncritical Margin can be used to compensate implementation dependent effects: Resonant Worst Case" Long wires = High inductance Current modulation leads to current oscillations & overshoots "Capacitive Worst Case" High capacitive bus load Limitation of slope steepness Page 20

21 Critical implementation parameters Comparator Sampling Digital Decoder Page 21

22 Critical implementation parameters Undershoot I Undershoot Data Transmission Parameters: Sending current amplitude Data rate / bit length Slope steepness (20% - 80% rise- & fall-times) Undershoot current Current Amplitude Rise / Fall Times Hardware Parameters: Sensor(s) capacitive load & resistance ECU capacitive load & resistance Cable inductance & resistance Page 22

23 PSI5 2 nodes 1.94m / 2.64m ECU 1.94m 2.64m S1 S2 189kbps Nominal case: rise time: 557 ns over- & undershoot: 0% Capacitive worst case: rise time: 1144 ns Resonant worst case: overshoot: 3.6% undershoot: -3.6% rise time: 373 ns Robust system operation expected Page 23

24 PSI5 2 nodes 4.08m / 1.30m ECU 4.08m 1.3m S1 S2 189kbps Nominal case: rise time: 533 ns over- & undershoot: 0% Capacitive worst case: rise time: 1144 ns Resonant worst case: overshoot: 12.8% undershoot: -6.6% rise time: 361 ns Robust system operation expected Page 24

25 PSI5 3 nodes 3.22m / 2.74m / 2.04m ECU 3.22m 2.74m 2.04m S1 S2 S3 189kbps Nominal case: rise time: 533 ns overshoot: 1.3% undershoot: -3.35% Capacitive worst case: rise time: 1395 ns Resonant worst case: overshoot: 24.6% undershoot: -11.4% rise time: 352 ns Robust system operation expected Page 25

26 PSI5 4 nodes 2.25m / 3.65m / 3.60m / 5.54m ECU 2.25m 3.65m 3.60m 5.54m S1 S2 S3 S4 189kbps Nominal case: rise time: 520 ns overshoot: 11.2% undershoot: -1.8% Capacitive worst case: rise time: 1618 ns Resonant worst case: overshoot: 43.3% undershoot: -21.3% rise time: 339 ns Robust system operation expected Page 26

27 PSI5 outlook Costs - Cost efficient components - Cable and Harness - Low weight, little required space, low power Functionality - Flexible system fulfilling different needs and applications - Scalable and extendable (for different data rates) Safety - Reduced emmision - Signal robustness - Error handling Availability - Allows reuse/adaptation of existing developments for/in automotive - Keeps being mantained Robustness - Stable networking, fast start- up - Data availability Page 27

28 PSI5 outlook Costs - Cost efficient components - Cable and Harness - Low weight, little required space, low power Availability - Allows reuse/adaptation of existing developments for/in automotive - Keeps being mantained Functionality - Flexible system fulfilling different needs and applications - Scalable and extendable (for different data rates) Data rates [bit/s] 1G 100M 10M 1M 100k 10k SENT LIN 3-wire 3-wire DSI3 PSI5 2-wire 2-wire SPI 6-wire I2C 4-wire CAN FD CAN high 3/4-wire CAN low 3/4-wire FlexRay wire/optical Implementation costs Page 28

Considerations on Functional Safety of the PSI5 Interface in the Scope of the ISO26262

Considerations on Functional Safety of the PSI5 Interface in the Scope of the ISO26262 PSI5 Considerations on Functional Safety of the PSI5 Interface in the Scope of the ISO26262 part 1 presentation part 2 paper Chassis Systems Control 1 AE/PJ-APS-Hepp, CC/ECS4 04/06/2012 Robert Bosch GmbH

More information

Keysight Technologies Triggering on and Decoding the PSI5 Sensor Serial Bus

Keysight Technologies Triggering on and Decoding the PSI5 Sensor Serial Bus Keysight Technologies Triggering on and Decoding the PSI5 Sensor Serial Bus Using Keysight InfiniiVision X-Series Oscilloscopes Application Note Introduction The Peripheral Sensor Interface 5 (PSI5) serial

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications Peripheral Sensor Interface for Automotive Applications Substandard Powertrain I Contents 1 Introduction 1 2 Definition of Terms 2 3 Data Link Layer 3 Sensor to ECU Communication... 3 3.1.1 Data Frame...

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications Technical Peripheral Sensor Interface for Automotive Applications I Contents 1 Introduction 1 1.1 Description... 1 1.2 Main Features... 1 1.3 Scope... 2 1.4 Legal Information... 2 1.4.1 Disclaimer... 2

More information

IBM Platform Technology Symposium

IBM Platform Technology Symposium IBM Platform Technology Symposium Rochester, Minnesota USA September 14-15, 2004 Remote control by CAN bus (Controller Area Network) including active load sharing for scalable power supply systems Authors:

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications Page 0 / 46 for Automotive Applications Technical psi5_specification_v13_080729.doc / 29.07.08 Page 1 / 46 Content 1 Introduction... 3 1.1 Description... 3 1.2 Main Features... 3 1.3 Scope... 3 1.4 Legal

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications for Automotive Applications Technical 01/2018 I Contents 1 Introduction 1 2 Definition of Terms 2 3 Data Link Layer 3 3.1 Sensor to ECU Communication... 3 3.2 ECU to Sensor Communication... 4 4 Physical

More information

Distributed Systems Interface

Distributed Systems Interface Distributed Systems Interface http://www.dsiconsortium.org/ June 22, 2010 1 Agenda 1. What is the DSI Consortium? 2. What are the consortium goals for the 3 rd generation DSI standard (DSI3)? 3. What are

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications Peripheral Sensor Interface for Automotive Applications Substandard Airbag I Contents 1 Introduction 1 2 Definition of Terms 2 3 Data Link Layer 3 3.1 Sensor to ECU Communication... 3 3.2 ECU to Sensor

More information

VT System. Product Information

VT System. Product Information VT System Product Information Table of Contents 1 I/O Interface Modules for the ECU Test... 4 1.1 Overview of Advantages... 4 1.2 Application Areas... 4 1.3 Functions... 4 1.4 Integration into CANoe...

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications I for Automotive Applications Substandard Chassis and Safety 121005_psi5_spec_v2d1_Chassis_and_Safety.doc 04.10.2012 II Contents 1 Introduction 1 2 Recommended Operation Modes 2 3 Sensor to ECU communication

More information

Systems. Roland Kammerer. 29. October Institute of Computer Engineering Vienna University of Technology. Communication in Distributed Embedded

Systems. Roland Kammerer. 29. October Institute of Computer Engineering Vienna University of Technology. Communication in Distributed Embedded Communication Roland Institute of Computer Engineering Vienna University of Technology 29. October 2010 Overview 1. Distributed Motivation 2. OSI Communication Model 3. Topologies 4. Physical Layer 5.

More information

Peripheral Sensor Interface for Automotive Applications

Peripheral Sensor Interface for Automotive Applications I Peripheral Sensor Interface for Automotive Applications Substandard Airbag II Contents 1 Introduction 1 2 Recommended Operation Modes 2 2.1 Daisy Chain Operation Principle... 2 2.1.1 Preferred Daisy-Chain

More information

DSI Bus Standard. Version March 29, 2005

DSI Bus Standard. Version March 29, 2005 SI Bus Standard Version. March 9, 5 **Implementation of the Bus Standard is governed by the terms of the Bus Standard ovenant, any changes to the specification must be agreed to by both TRW and Freescale

More information

BiSS Interface AN18: BiSS C ANALYZER

BiSS Interface AN18: BiSS C ANALYZER Rev A3, Page 1/7 CONTENTS BASIC OPERATION 1 Clock rates................... 1 BiSS analyzer modes............. 2 2 BiSS ANALYZER INSTALLATION 2 ELECTRICAL INTERFACE 2 RS422 BiSS Encoder Interface........

More information

VT System. Product Information

VT System. Product Information VT System Product Information V22/2018 2 Table of Contents 1 I/O Interface Modules for the ECU Test... 5 1.1 Overview of Advantages... 5 1.2 Application Areas... 5 1.3 Functions... 5 1.4 Integration into

More information

Copyright 2007 Year IEEE. Reprinted from ISCAS 2007 International Symposium on Circuits and Systems, May This material is posted here

Copyright 2007 Year IEEE. Reprinted from ISCAS 2007 International Symposium on Circuits and Systems, May This material is posted here Copyright 2007 Year IEEE. Reprinted from ISCAS 2007 International Symposium on Circuits and Systems, 27-30 May 2007. This material is posted here with permission of the IEEE. Such permission of the IEEE

More information

Serial Bus Analysis Application Note

Serial Bus Analysis Application Note Mixed Signal Oscilloscopes DLM2000 Series 1. Introduction Embedded systems are being built into information and industrial devices used in various sectors, with focus on digital household appliances, such

More information

Communication systems for vehicle electronics

Communication systems for vehicle electronics Background Communication systems for vehicle electronics Communication systems for vehicle electronics Presentation overview automotive electronics as an application area for realtime communication Real

More information

CAN FD and the CRC issue

CAN FD and the CRC issue CAN FD CAN FD and the CRC issue During ISO standardization the original CAN FD protocol needed to be modified, in order to maintain the high level of reliability of Classical CAN. This article illustrates

More information

Outputs U8 I1. Protection class IP64 (IP67) WB25

Outputs U8 I1. Protection class IP64 (IP67) WB25 Analog Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 12000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant version on request Specifications Outputs

More information

Modbus communication module for TCX2: AEX-MOD

Modbus communication module for TCX2: AEX-MOD Modbus communication module for TCX2: Communication Specification TCX2 is factory installed in TCX2 series controllers with -MOD suffix, and is also available separately upon request for customer installation

More information

EECE494: Computer Bus and SoC Interfacing. Serial Communication: RS-232. Dr. Charles Kim Electrical and Computer Engineering Howard University

EECE494: Computer Bus and SoC Interfacing. Serial Communication: RS-232. Dr. Charles Kim Electrical and Computer Engineering Howard University EECE494: Computer Bus and SoC Interfacing Serial Communication: RS-232 Dr. Charles Kim Electrical and Computer Engineering Howard University Spring 2014 1 Many types of wires/pins in the communication

More information

In this lecture, we will first examine practical digital signals. Then we will discuss the timing constraints in digital systems.

In this lecture, we will first examine practical digital signals. Then we will discuss the timing constraints in digital systems. 1 In this lecture, we will first examine practical digital signals. Then we will discuss the timing constraints in digital systems. The important concepts are related to setup and hold times of registers

More information

Payload measurements with digital signals. Markus Lörner, Product Management Signal Generation Dr. Susanne Hirschmann, Signal Processing Development

Payload measurements with digital signals. Markus Lörner, Product Management Signal Generation Dr. Susanne Hirschmann, Signal Processing Development Payload measurements with digital signals Markus Lörner, Product Management Signal Generation Dr. Susanne Hirschmann, Signal Processing Development Agenda ı Why test with modulated signals? ı Test environment

More information

Comfort Electronics: Thermal Management Chassis Control Parking Assistant

Comfort Electronics: Thermal Management Chassis Control Parking Assistant Presentation overview Background automotive electronics as an application area for realtime communication Real time protocols LIN Local Interconnection Network A premium passenger car is controlled and

More information

BSc (Hons) Computer Science with Network Security, BEng (Hons) Electronic Engineering. Cohorts: BCNS/17A/FT & BEE/16B/FT

BSc (Hons) Computer Science with Network Security, BEng (Hons) Electronic Engineering. Cohorts: BCNS/17A/FT & BEE/16B/FT BSc (Hons) Computer Science with Network Security, BEng (Hons) Electronic Engineering Cohorts: BCNS/17A/FT & BEE/16B/FT Examinations for 2016-2017 Semester 2 & 2017 Semester 1 Resit Examinations for BEE/12/FT

More information

Datacommunication I. Layers of the OSI-model. Lecture 3. signal encoding, error detection/correction

Datacommunication I. Layers of the OSI-model. Lecture 3. signal encoding, error detection/correction Datacommunication I Lecture 3 signal encoding, error detection/correction Layers of the OSI-model repetition 1 The OSI-model and its networking devices repetition The OSI-model and its networking devices

More information

Designing with STM32F3x

Designing with STM32F3x Designing with STM32F3x Course Description Designing with STM32F3x is a 3 days ST official course. The course provides all necessary theoretical and practical know-how for start developing platforms based

More information

Industrial Interface Standards Overview:

Industrial Interface Standards Overview: Industrial Interface Standards Overview: RS-485, RS-422, PROFIBUS, RS-232, CAN, LIN, IO-Link, I2C October 2018 ASC/INT/TRX 1 Agenda The following standards will be covered RS-485, RS-422, ProfiBus RS-232

More information

Automotive Control Solution for Brushless DC Motors

Automotive Control Solution for Brushless DC Motors Page 1 Automotive Control Solution for Brushless DC Motors TTTech provides solutions for setting up distributed systems with brushless DC motors. Today brushless DC motors are used in a variety of applications.

More information

POWER- SWITCHING CONVERTERS Medium and High Power

POWER- SWITCHING CONVERTERS Medium and High Power POWER- SWITCHING CONVERTERS Medium and High Power By Dorin O. Neacsu Taylor &. Francis Taylor & Francis Group Boca Raton London New York CRC is an imprint of the Taylor & Francis Group, an informa business

More information

Outputs U8 I1. Protection class IP64 (IP67) WB25KT

Outputs U8 I1. Protection class IP64 (IP67) WB25KT Analog or Digital Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 236.2 in. to 0... 984.3 in. 0... 6000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant

More information

RIGOL Data Sheet. DG3000 Series Function/Arbitrary Waveform Generator DG3121A, DG3101A, DG3061A. Product Overview. Easy to Use Design.

RIGOL Data Sheet. DG3000 Series Function/Arbitrary Waveform Generator DG3121A, DG3101A, DG3061A. Product Overview. Easy to Use Design. RIGOL Data Sheet DG3000 Series Function/Arbitrary Waveform Generator DG3121A, DG3101A, DG3061A Product Overview DG3000 Series Function/Arbitrary Waveform Generators adopt DDS technology, which enables

More information

POSICHRON position sensor in a stainless steel pressure tube. Protection class IP68/IP69K

POSICHRON position sensor in a stainless steel pressure tube. Protection class IP68/IP69K Round Profile Housing with Analog POSICHRON position sensor in a stainless steel pressure tube Protection class IP68/IP69K Underwater applications, permanent pressure-proof up to 15 bar Measurement range

More information

Applications: Power generation, Cogeneration, Stationary power Large engines

Applications: Power generation, Cogeneration, Stationary power Large engines Features: 8 inputs are user selectable from the following. 0-5V, 0-10V, 4-20 ma or 0-20 ma Digital inputs for interface to switches, etc. PWM signal, pulse or 16-bit counter inputs from sensors or diesel

More information

6. has units of bits/second. a. Throughput b. Propagation speed c. Propagation time d. (b)or(c)

6. has units of bits/second. a. Throughput b. Propagation speed c. Propagation time d. (b)or(c) King Saud University College of Computer and Information Sciences Information Technology Department First Semester 1436/1437 IT224: Networks 1 Sheet# 10 (chapter 3-4-5) Multiple-Choice Questions 1. Before

More information

P/N: AX Applications: Off-highway construction equipment Municipal vehicles. Ordering Part Numbers:

P/N: AX Applications: Off-highway construction equipment Municipal vehicles. Ordering Part Numbers: Features: Command messages are received through the CAN network (no physical inputs) 10 universal outputs of up to 2.5A are user selectable from the following types (up to a maximum of 7A of controller

More information

Industrial Interface Standards Overview: RS-485/422, PROFIBUS, RS-232, CAN, LIN, I2C, IO-Link. October 2018 Transceiver Interface Products

Industrial Interface Standards Overview: RS-485/422, PROFIBUS, RS-232, CAN, LIN, I2C, IO-Link. October 2018 Transceiver Interface Products Industrial Interface Standards Overview: RS-485/422, PROFIBUS, RS-232, CAN, LIN, I2C, IO-Link October 2018 Transceiver Interface Products 1 Agenda Following standards will be covered RS-485 RS-422 ProfiBus

More information

INTERNATIONAL TELECOMMUNICATION UNION. Timing requirements of slave clocks suitable for use as node clocks in synchronization networks

INTERNATIONAL TELECOMMUNICATION UNION. Timing requirements of slave clocks suitable for use as node clocks in synchronization networks INTERNATIONAL TELECOMMUNICATION UNION ITU-T G.812 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (06/2004) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital networks Design

More information

SourceSync. Exploiting Sender Diversity

SourceSync. Exploiting Sender Diversity SourceSync Exploiting Sender Diversity Why Develop SourceSync? Wireless diversity is intrinsic to wireless networks Many distributed protocols exploit receiver diversity Sender diversity is a largely unexplored

More information

Performance of Combined Error Correction and Error Detection for very Short Block Length Codes

Performance of Combined Error Correction and Error Detection for very Short Block Length Codes Performance of Combined Error Correction and Error Detection for very Short Block Length Codes Matthias Breuninger and Joachim Speidel Institute of Telecommunications, University of Stuttgart Pfaffenwaldring

More information

ROM/UDF CPU I/O I/O I/O RAM

ROM/UDF CPU I/O I/O I/O RAM DATA BUSSES INTRODUCTION The avionics systems on aircraft frequently contain general purpose computer components which perform certain processing functions, then relay this information to other systems.

More information

Lecture 3 Data Link Layer - Digital Data Communication Techniques

Lecture 3 Data Link Layer - Digital Data Communication Techniques DATA AND COMPUTER COMMUNICATIONS Lecture 3 Data Link Layer - Digital Data Communication Techniques Mei Yang Based on Lecture slides by William Stallings 1 ASYNCHRONOUS AND SYNCHRONOUS TRANSMISSION timing

More information

Gary Hsiao 蕭舜謙 2019/01/15&16. Project Manager, Keysight Technologies

Gary Hsiao 蕭舜謙 2019/01/15&16. Project Manager, Keysight Technologies Gary Hsiao 蕭舜謙 2019/01/15&16 Project Manager, Keysight Technologies W H AT Y O U C A N E X P E C T What is Automotive Ethernet? Challenges of moving to a new standard Solution Details 2 B E N E F I T S

More information

LIN Bus Shunt. Slave Node Position Detection. Revision 1.0. LIN Consortium, LIN is a registered Trademark. All rights reserved.

LIN Bus Shunt. Slave Node Position Detection. Revision 1.0. LIN Consortium, LIN is a registered Trademark. All rights reserved. December 10, 2008; Page 1 LIN Bus Shunt LIN Consortium, 2008. LIN is a registered Trademark. All rights reserved. December 10, 2008; Page 2 DISCLAIMER This specification as released by the LIN Consortium

More information

Findings of the Artist2 Workshop Beyond Autosar

Findings of the Artist2 Workshop Beyond Autosar Findings of the Artist2 Workshop Beyond Autosar Werner Damm OFFIS Acknowledgements This presentation reports on Results of the NoE Artist2, Workshop Beyond Autosar (co-organized with Albert Benveniste,

More information

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface EPAD & CPAD Modules EPAD2/CPAD2/CPAD3 Modules Modules with CAN or RS-485 The EPAD2 and CPAD2/CPAD3 series are multichannel modules and combine analog signal conditioning and A/D converter in an extremely

More information

DG5000 series Waveform Generators

DG5000 series Waveform Generators DG5000 series Waveform Generators DG5000 is a multifunctional generator that combines many functions in one, including Function Generator, Arbitrary Waveform Generator, IQ Baseband /IQ IF, Frequency Hopping

More information

Mapping Peripheral Capabilities When Migrating From 8-bit to 16-bit PIC MCUs

Mapping Peripheral Capabilities When Migrating From 8-bit to 16-bit PIC MCUs Mapping Peripheral Capabilities When Migrating From 8-bit to 16-bit PIC MCUs Peripherals Summary When migrating from one PIC microcontroller (MCU) family to another, you get to stay within the same MPLAB

More information

Digital Power: Consider The Possibilities

Digital Power: Consider The Possibilities Power: Consider The Possibilities Joseph G Renauer Michael G. Amaro David Figoli Texas Instruments 1 The Promise of Power Accuracy and precision No drift Unit to unit uniformity Programmable performance

More information

ETSI ES V1.1.1 ( )

ETSI ES V1.1.1 ( ) ES 202 007 V1.1.1 (2002-03) Standard Electromagnetic compatibility and Radio spectrum Matters (ERM); Close Range peer-to-peer symmetrical Data Communication (CRDC) system 2 ES 202 007 V1.1.1 (2002-03)

More information

RS-232 Electrical Specifications and a Typical Connection

RS-232 Electrical Specifications and a Typical Connection Maxim > Design Support > Technical Documents > Tutorials > Interface Circuits > APP 723 Keywords: RS-232, rs232, RS-422, rs422, RS-485, rs485, RS-232 port powered, RS-232 to RS-485 conversion, daisy chain,

More information

Ultra flat POSICHRON position sensor. Current Resolution

Ultra flat POSICHRON position sensor. Current Resolution Ultra flat Profile Housing with analog Ultra flat POSICHRON position sensor Only 8 mm high and 28 mm wide Protection class up to IP67 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement

More information

U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB61

U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB61 Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...

More information

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface EPAD & CPAD Modules Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement EPAD2/CPAD2/CPAD3 Modules Modules with CAN or RS-485 The EPAD2 and CPAD2/CPAD3 series

More information

Data and Computer Communications

Data and Computer Communications Data and Computer Communications Error Detection Mohamed Khedr http://webmail.aast.edu/~khedr Syllabus Tentatively Week 1 Week 2 Week 3 Week 4 Week 5 Week 6 Week 7 Week 8 Week 9 Week 10 Week 11 Week 12

More information

INTEGRATED CIRCUITS. AN109 Microprocessor-compatible DACs Dec

INTEGRATED CIRCUITS. AN109 Microprocessor-compatible DACs Dec INTEGRATED CIRCUITS 1988 Dec DAC products are designed to convert a digital code to an analog signal. Since a common source of digital signals is the data bus of a microprocessor, DAC circuits that are

More information

CTD600 Communication Trainer kit

CTD600 Communication Trainer kit kit Digital RELATED PRODUCTS v Analog s v Optical Fibers s v Digital and Analog s v Communication Electronic Trainers v Function Generator and Power Supply v Multiple Signal Generator and 1 Line Code 2

More information

LCC-10 Product manual

LCC-10 Product manual LCC-10 Product manual Rev 1.0 Jan 2011 LCC-10 Product manual Copyright and trademarks Copyright 2010 INGENIA-CAT, S.L. / SMAC Corporation Scope This document applies to i116 motion controller in its hardware

More information

HAMEG Programmable Measuring Instruments Series 8100

HAMEG Programmable Measuring Instruments Series 8100 HAMEG Programmable Measuring Instruments Series 8100 HAMEG Programmable Measuring Instruments Series 8100 are ideally suited for test installations in production and automated tests in laboratories. They

More information

Theoretical maximum data rate estimations for PLC in automotive power distribution systems

Theoretical maximum data rate estimations for PLC in automotive power distribution systems Theoretical maximum data rate estimations for PLC in automotive power distribution systems Alexander Zeichner, Zongyi Chen, Stephan Frei TU Dortmund University Dortmund, Germany alexander.zeichner@tu-dortmund.de

More information

Prototyping Unit for Modelbased Applications

Prototyping Unit for Modelbased Applications PUMA Software and hardware at the highest level Prototyping Unit for Modelbased Applications With PUMA, we offer a compact and universal Rapid-Control-Prototyping-Platform optionally with integrated power

More information

RS Pro ARBITRARY/FUNCTION WAVEFORM GENERATOR SDG800 SERIES

RS Pro ARBITRARY/FUNCTION WAVEFORM GENERATOR SDG800 SERIES Product Datasheet ENGLISH Stock No: 1236458 1236459 RS Pro ARBITRARY/FUNCTION WAVEFORM GENERATOR SDG800 SERIES DDS technology, Single-channel output 125MSa/s sample rate, 14bit vertical resolution. 5 types

More information

U8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB12

U8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB12 Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...

More information

How different FPGA firmware options enable digitizer platforms to address and facilitate multiple applications

How different FPGA firmware options enable digitizer platforms to address and facilitate multiple applications How different FPGA firmware options enable digitizer platforms to address and facilitate multiple applications 1 st of April 2019 Marc.Stackler@Teledyne.com March 19 1 Digitizer definition and application

More information

ArbStudio Arbitrary Waveform Generators. Powerful, Versatile Waveform Creation

ArbStudio Arbitrary Waveform Generators. Powerful, Versatile Waveform Creation ArbStudio Arbitrary Waveform Generators Powerful, Versatile Waveform Creation UNMATCHED WAVEFORM UNMATCHED WAVEFORM GENERATION GENERATION Key Features 125 MHz bandwidth 1 GS/s maximum sample rate Long

More information

Keysight Technologies Automotive Serial Bus Testing

Keysight Technologies Automotive Serial Bus Testing Keysight Technologies Automotive Serial Bus Testing Using Keysight s InfiniiVision X-Series and Infiniium S-Series Oscilloscopes Application Note Introduction The primary reason engineers use oscilloscopes

More information

CAN for time-triggered systems

CAN for time-triggered systems CAN for time-triggered systems Lars-Berno Fredriksson, Kvaser AB Communication protocols have traditionally been classified as time-triggered or eventtriggered. A lot of efforts have been made to develop

More information

Components Signal Conditioning For Your Computer Instruments Standard Models

Components Signal Conditioning For Your Computer Instruments Standard Models EPAD2/CPAD2 Modules Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement CAN and RS-485 Modules EPAD2/CPAD2 Modules The EPAD2 and CPAD2 series are multichannel

More information

DEMONSTRATIONAL SYSTEM FOR TRAINING IN FlexRay COMMUNICATION

DEMONSTRATIONAL SYSTEM FOR TRAINING IN FlexRay COMMUNICATION XIX IMEKO World Congress Fundamental and Applied Metrology September 611, 29, Lisbon, Portugal DEMONSTRATIONAL SYSTEM FOR TRAINING IN COMMUNICATION Jan Malinsky 1, Petr Kocourek 2 1 Czech Technical University

More information

Design of Vehicle Lamp Control System based on LIN bus Wen Jian-yue1, a, Luo Feng1, b

Design of Vehicle Lamp Control System based on LIN bus Wen Jian-yue1, a, Luo Feng1, b 4th National Conference on Electrical, Electronics and Computer Engineering (NCEECE 2015) Design of Vehicle Lamp Control System based on LIN bus Wen Jian-yue1, a, Luo Feng1, b 1 Clean Energy Automotive

More information

SMARTALPHA RF TRANSCEIVER

SMARTALPHA RF TRANSCEIVER SMARTALPHA RF TRANSCEIVER Intelligent RF Modem Module RF Data Rates to 19200bps Up to 300 metres Range Programmable to 433, 868, or 915MHz Selectable Narrowband RF Channels Crystal Controlled RF Design

More information

10 Mb/s Single Twisted Pair Ethernet Implementation Thoughts Proof of Concept Steffen Graber Pepperl+Fuchs

10 Mb/s Single Twisted Pair Ethernet Implementation Thoughts Proof of Concept Steffen Graber Pepperl+Fuchs 10 Mb/s Single Twisted Pair Ethernet Implementation Thoughts Proof of Concept Steffen Graber Pepperl+Fuchs IEEE802.3 10 Mb/s Single Twisted Pair Ethernet Study Group 9/8/2016 1 Overview Signal Coding Analog

More information

INTEGRATED CIRCUITS. MF RC500 Active Antenna Concept. March Revision 1.0 PUBLIC. Philips Semiconductors

INTEGRATED CIRCUITS. MF RC500 Active Antenna Concept. March Revision 1.0 PUBLIC. Philips Semiconductors INTEGRATED CIRCUITS Revision 1.0 PUBLIC March 2002 Philips Semiconductors Revision 1.0 March 2002 CONTENTS 1 INTRODUCTION...3 1.1 Scope...3 1.1 General Description...3 2 MASTER AND SLAVE CONFIGURATION...4

More information

ArbStudio Arbitrary Waveform Generators

ArbStudio Arbitrary Waveform Generators ArbStudio Arbitrary Waveform Generators Key Features Outstanding performance with 16-bit, 1 GS/s sample rate and 2 Mpts/Ch 2 and 4 channel models Digital pattern generator PWM mode Sweep and burst modes

More information

MIL-STD-1553 DATA BUS/PCM MULTIPLEXER SYSTEM

MIL-STD-1553 DATA BUS/PCM MULTIPLEXER SYSTEM MIL-STD-1553 DATA BUS/PCM MULTIPLEXER SYSTEM Item Type text; Proceedings Authors Malone, Erle W.; Breedlove, Phillip Publisher International Foundation for Telemetering Journal International Telemetering

More information

Design Implementation Description for the Digital Frequency Oscillator

Design Implementation Description for the Digital Frequency Oscillator Appendix A Design Implementation Description for the Frequency Oscillator A.1 Input Front End The input data front end accepts either analog single ended or differential inputs (figure A-1). The input

More information

Bluetooth in service and production applications. By Kent Lennartsson, KVASER AB Copyright September 2001

Bluetooth in service and production applications. By Kent Lennartsson, KVASER AB  Copyright September 2001 Bluetooth in service and production applications. By Kent Lennartsson, KVASER AB www.kvaser.com Copyright September 2001 This paper will describe the experience we have gained using radio communication,

More information

A premium passenger car is controlled and managed by 80+ Embedded Systems. Communication systems for vehicle electronics

A premium passenger car is controlled and managed by 80+ Embedded Systems. Communication systems for vehicle electronics Presentation overview Background automotive electronics, an application area for time triggered communication. Time triggered protocols A premium passenger car is controlled and managed by 80+ Embedded

More information

POSIWIRE. WS10SG Position Sensor. Cable Extension Position Sensors. Datasheet

POSIWIRE. WS10SG Position Sensor. Cable Extension Position Sensors. Datasheet Cable Extension Position Sensors Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation

More information

Digital to Digital Encoding

Digital to Digital Encoding MODULATION AND ENCODING Data must be transformed into signals to send them from one place to another Conversion Schemes Digital-to-Digital Analog-to-Digital Digital-to-Analog Analog-to-Analog Digital to

More information

RIGOL. User s Guide. DS6000 Digital Oscilloscope Demo Board. July RIGOL Technologies, Inc.

RIGOL. User s Guide. DS6000 Digital Oscilloscope Demo Board. July RIGOL Technologies, Inc. RIGOL User s Guide DS6000 Digital Oscilloscope Demo Board July 2011 RIGOL Technologies, Inc. RIGOL Guaranty and Declaration Copyright 2011 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information

More information

EMS THOMAS WÜNSCHE. CANwatch. CAN Physical Layer Analyser. User Manual. Documentation for CANwatch version 1.2. Documentation date: November 2004.

EMS THOMAS WÜNSCHE. CANwatch. CAN Physical Layer Analyser. User Manual. Documentation for CANwatch version 1.2. Documentation date: November 2004. Documentation for version 1.2. Documentation date: November 2004. No part of this document or the software described herein may be reproduced in any form without prior written agreement from EMS Dr. Thomas

More information

Project: IEEE P Working Group for Wireless Personal Area Networks (WPANS)

Project: IEEE P Working Group for Wireless Personal Area Networks (WPANS) Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANS) Title: [General Atomics Call For Proposals Presentation] Date Submitted: [4 ] Source: Naiel Askar, Susan Lin, General Atomics-

More information

Applications & Cases. EPCOS AG A TDK Group Company Edition

Applications & Cases. EPCOS AG A TDK Group Company Edition Applications & Cases Reference Firs EPCOS AG A TDK Group Company Edition 2018 www.epcos.com 1 / 11 egrated solution for inverters to be used in e-mobility powertrains and industrial applications. The design

More information

Using Signaling Rate and Transfer Rate

Using Signaling Rate and Transfer Rate Application Report SLLA098A - February 2005 Using Signaling Rate and Transfer Rate Kevin Gingerich Advanced-Analog Products/High-Performance Linear ABSTRACT This document defines data signaling rate and

More information

QUESTION BANK EC 1351 DIGITAL COMMUNICATION YEAR / SEM : III / VI UNIT I- PULSE MODULATION PART-A (2 Marks) 1. What is the purpose of sample and hold

QUESTION BANK EC 1351 DIGITAL COMMUNICATION YEAR / SEM : III / VI UNIT I- PULSE MODULATION PART-A (2 Marks) 1. What is the purpose of sample and hold QUESTION BANK EC 1351 DIGITAL COMMUNICATION YEAR / SEM : III / VI UNIT I- PULSE MODULATION PART-A (2 Marks) 1. What is the purpose of sample and hold circuit 2. What is the difference between natural sampling

More information

Getting Started Guide

Getting Started Guide MaxEye IEEE 0.15.4 UWB Measurement Suite Version 1.0.0 Getting Started Guide 1 Table of Contents 1. Introduction... 3. Installed File Location... 3 3. Programming Examples... 4 3.1. 0.15.4 UWB Signal Generation...

More information

Dual Channel Function/Arbitrary Waveform Generators 4050 Series

Dual Channel Function/Arbitrary Waveform Generators 4050 Series Data Sheet Dual Channel Function/Arbitrary Waveform Generators The Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary

More information

Project: IEEE P Study Group for Wireless Personal Area Networks (WPANs(

Project: IEEE P Study Group for Wireless Personal Area Networks (WPANs( Project: IEEE P802.15 Study Group for Wireless Personal Area Networks (WPANs( WPANs) Title: Alternatives for Lower Frequency Band Extension Date Submitted: July 12, 2004 Source: Andreas Wolf, Dr. Wolf

More information

Importance of measuring parasitic capacitance in isolated gate drive applications. W. Frank Infineon Technologies

Importance of measuring parasitic capacitance in isolated gate drive applications. W. Frank Infineon Technologies Importance of measuring parasitic capacitance in isolated gate drive applications W. Frank Infineon Technologies Contents 1 Why is capacitive coupling important in high voltage (HV) applications? 2 Measurement

More information

Applications. Operating Modes. Description. Part Number Description Package. Many to one. One to one Broadcast One to many

Applications. Operating Modes. Description. Part Number Description Package. Many to one. One to one Broadcast One to many RXQ2 - XXX GFSK MULTICHANNEL RADIO TRANSCEIVER Intelligent modem Transceiver Data Rates to 100 kbps Selectable Narrowband Channels Crystal controlled design Supply Voltage 3.3V Serial Data Interface with

More information

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family Hardware Documentation Data Sheet HAL 1...6, 8, 9, HAL 16...19, 23 Hall Effect Sensor Family Edition Nov. 27, 23 621-48-4DS HALxx DATA SHEET Contents Page Section Title 3 1. Introduction 3 1.1. Features

More information

Chapter 4 Digital Transmission 4.1

Chapter 4 Digital Transmission 4.1 Chapter 4 Digital Transmission 4.1 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 4-2 ANALOG-TO-DIGITAL CONVERSION We have seen in Chapter 3 that a digital signal

More information

Application Note TLE9251V

Application Note TLE9251V Z8F57889426 Application Note TLE9251V About this document Scope and purpose This document provides application information for the transceiver TLE9251V from Infineon Technologies AG as Physical Medium

More information

QPLL Manual. Quartz Crystal Based Phase-Locked Loop for Jitter Filtering Application in LHC. Paulo Moreira. CERN - EP/MIC, Geneva Switzerland

QPLL Manual. Quartz Crystal Based Phase-Locked Loop for Jitter Filtering Application in LHC. Paulo Moreira. CERN - EP/MIC, Geneva Switzerland QPLL Manual Quartz Crystal Based Phase-Locked Loop for Jitter Filtering Application in LHC Paulo Moreira CERN - EP/MIC, Geneva Switzerland 2004-01-26 Version 1.0 Technical inquires: Paulo.Moreira@cern.ch

More information

POSICHRON position sensor in square profile. Protection class

POSICHRON position sensor in square profile. Protection class Square Profile Housing with Analog Output POSICHRON position sensor in square profile Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Easy installation with

More information

Week 2 Lecture 1. Introduction to Communication Networks. Review: Analog and digital communications

Week 2 Lecture 1. Introduction to Communication Networks. Review: Analog and digital communications Week 2 Lecture 1 Introduction to Communication Networks Review: Analog and digital communications Topic: Internet Trend, Protocol, Transmission Principle Digital Communications is the foundation of Internet

More information

Ranges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm. 4 pin socket M8 / cable 2 m

Ranges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm. 4 pin socket M8 / cable 2 m Flat Profile Housing with Analog POSICHRON position sensor Only 12 mm height and 36 mm width Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Ultra flat profile

More information