TELECOMMUNICATION SWITCHING SYSTEMS STUDY NOTES
|
|
- Aron Charles
- 6 years ago
- Views:
Transcription
1 TELECOMMUNICATION SWITCHING SYSTEMS STUDY NOTES UNIT I EVALUATION OF PUBLIC SWITCHED TELECOMMUNICATION NETWORKS Switching system functions stronger switching system cross bar exchange SPC exchange Message switching circuits switching Telephone handset four wire concept Hybrid circuit Echo suppressor and cancellors PCM coders Modems and relays Telecommunication standard. 1.1 Switching System. The switching centers receives the control signals, messages or conversations and forwards to the required destination, after necessary modification (link amplifications) if necessary. A switching system is a collection of switching elements arranged and controlled in such a way as to setup a communication path between any two distant points. A switching center of a telephone network comprising a switching network and its control and support equipment is called a central office. In computer communication, the switching technique used is known as packet switching or message switch (store and forward switching). In telephone network the switching method used is called circuit switching. Some practical switching system are step-by-step, cross barred relay system, digital switching systems, electronic switching system etc. Signalling Systems: A signalling system in a data communication networks exchanges signalling information effectively between subscribers. The signalling systems are essential building blocks in providing the ultimate objective of a worldwide automatic telephone services standardized. Signalling provides the interface between different national systems. The introduction of signalling system was the big step in improving the PSTN. 1.2 Strowger switching systems-the Invention of Automatic Switching Almon B. Strowger was an undertaker in Kansas City, USA. The story goes that there was a competing undertaker locally whose wife was an operator at the local (manual) telephone exchange. Whenever a caller asked to be put through to Strowger, calls were deliberately put through to his competitor. This obviously frustrated Strowger greatly and he set about devising a system for doing away with the human part of the equation.strowger developed a system of automatic switching using an electromechanicalcal switch based around around electromagnets and pawls. In this selector, a moving wiper (with contacts on the end) moved up to and around a bank of many other contacts, making a connection with any one of them.
2 Selector Theory A selector starts in the 'home' position and with each 'impulse' the wiper contacts would progress round the output bank to the next position. Each output would be connected to a different subscriber, thus the caller could connect to any other subscriber who was connected to that bank, without any manual assistance from an operator. Fig1. Diagram of a simple Selector In Figure (above), the selector has 10 outputs, so a caller can choose to connect to any of 10 different subscribers by dialling any digit from 1 to 0 (0=10). This sort of automatic selector is known as a Uniselector, as it moves in just one plane (rotary). Fig2. simple Selector The contact arm (wiper) moves across a fixed set of switch contacts. In the case single uniselector, each contact is connected to an outgoing channel, so a caller can choose to connect to any of 10 different subscribers by dialling any digit from 1 to 10. As this selector moves in just one plane, thus sort of automated selector is known as uniselector. An uniselector is operated by (wiper movement) is performed by a drive mechanism of a rotary switch. This mechanism contains an armature, electromagnet, Pawl, and Ratched wheel. The wiper is attached to the ratchet wheel. When the line relay detects a calling signal, the magnet is energised and operates the ratchet wheel, pawl and its associated wiper. When the electromagnet is deenergised the armature is released and returns to its rest position. Thus, if the electromagnet is energised and deenergised, (for example 3 times by applying 3 pulses), the wiper moves by three contacts. Two motion selectors
3 A two motion selector is a selector in which a set of wipers is moved in two different planes by means of separate mechanisms. By mounting several arcs of outlets on top of each other, the number of outlets can be increased significantly, but the wipers are then required to move both horizontally to select a bank and then vertically to move around that bank to the required outlet. Such a selector is known as a Two motion selector. By mounting several arcs of outlets on top of each other, the number of outlets can be increased significantly but the wipers are then required to move both horizontally to select a bank and then vertically to move around that bank to the required outlet. Such a selector is known as atwo-motion Selector. Two-motion selectors typically have 10 rows of 10 outlets, thus 100 possible outlets altogether. A two-motion selector can therefore accept two dialled digits from a subscriber and route the call to any of 100 numbers. The selector 'wipers' always start in their resting 'home' position. The first digit moves the selector veritically up to the corresponding level and then the second digit moves the wipers around the contacts of that level. This is shown in figure 3, below. Fig. 3 - A Two-Motion "Final" Selector The type of selector shown above is known as a Final Selector as it takes the final two digits of the number dialled. Most numbers dialled are several digits longer, and therefore pass through a
4 chain of selectors. Selectors previous to the Final Selectors are different; they are called Group Selectors. Group selectors take only ONE digit from the caller, and step up the number of levels according to the digit dialled. The rotary movement is then automatic; the wipers search around that level to find a free outlet - i.e. the next free selector in the chain. This is covered in more depth later. The Rotary Dial A train of pulses is used to represent a digit in the subscriber number Successive Digits are distinguished by a pulse (interdigit gap) To dial a digit, the circuit is interrupted according to the number dialed so, for example, if you dialed a '4' then the line would be pulsed four times, quickly in succession. After a moment, it was assumed that the digit was complete and that any further pulses belonged to the next digit. In order to ensure that successive digits didn't come too soon and thus be mistaken for pulses belonging to the previous digit, the finger stop on the dial was put some way round so that after removing your finger from the dial, there was a minimum time taken for the dial to return to the home position. It is important to note here that for the purposes of dialing, the digit '0' sends TEN pulses for dialling - i.e. the selector will step around to the 10th position. Progress Tones With manual switching systems, there had always been an operator to advise the caller of the current status. Having removed the need for an operator, a system was required to indicate call progress to the caller. A series of distinctive tones was developed which were produced by a machine called a Ring Generator. The ring generator was entirely electromechanical; different cadences and tones were produced by rotating cams connected to a generator. As well as generating the tones, the Ring Generator machine also provided timed pulses which were used by various processes throughout the exchange. The progress tones produced were as follows : Dial Tone (DT). This is a 33 c/s continuous note and is applied to the line after the subscriber has lifted his handset and the switching equipment has allocated him an
5 available outlet for this call to proceed. There would have been a physical limit on the number of calls an exchange could handle so if all equipment was already in use, the subscriber would not get dial tone. The actual pitch of the dial Tone varied from exchange to exchange depending on the adjustment of the ring generator. Call in Progress Tone. Inform the calling subscriber that the call is being established Busy Tone (BT). A higher pitched note of 400 c/s interrupted to give a cadence of 0.75 seconds on, 0.75 seconds off. Busy tone indicated either that the called subscriber is already off-hook (busy) or that the route to the called subscriber is congested. In later systems, a slightly different cadence was introduced in order to distinguish between these two scenarios. Number Unobtainable Tone (NUT). Identical pitch to the busy tone but continuous. This tone is used to indicate that a number is out of service, faulty or that a spare line has been dialled. Ring Tone (RT). A tone of 133c/s which interrupted in the same cadence as the ring current which rings the telephone's bell at the called party's end : 0.4 seconds on, 0.2 seconds off. Step-by-step Switching What does step-by-step mean? The wiper steps forward by one contact at a time and moves as many contacts as the number of dial pulses received. Construction *Using uniselector *Using two-motion selectors *Combination of both
6 configuration of a step-by-step switching system Line equipment part (Pre-selector stage) Function: Provide access to common switching resources Category: Selector hunters - There is one dedicated selector hunter for each subscriber to search and seize a free selector from the switching matrix part. Usually 24-outlet uniselectors are used as selector hunters. Suitable for large Switches with fairly heavy traffic. Line finder-associated with the first set of selectors in switching matrix part, there is one line finder for each selector. Usually built using uniselectors or two-motion selectors. Suitable for small Switches with low traffic.
7 Switching network part (group selector stage + final stage) Control functions Performed by circuits associated with the selectors. Contact banks: Control and supervisory signals (P-wire/private~) Voice signals (positive & negative wires) Control and supervisory signals are carried from stage to stage by means of contacts in one of the banks. A selector X is said to have seized another selector Y in the next stage when positive, negative and private wires have been connected to those of Y. Selector control circuits Guarding circuit - An essential feature of all the selectors Making the selector busy as soon as it is seized. The guarding condition remains set as long as the call is not terminated.the guarding condition is indicated by an earth on the P-wire. Impulsing circuit - An essential part of all those selectors which have to respond to dialing pulses, i.e. group and final selectors The circuit is designed around 3 relays: 1.Fast acting: respond to dialing pulses and pass them to P-wire. 2 slow acting: Maintaining guarding conditions Recognizing the end of a pulse train
8 Homing circuit: All the selectors need homing circuit. Function: At the end of a conversation, release all the selectors and make them return to their home positions. Metering circuit A special feature of the final selectors. Function: Register a call against the calling party as soon as the called party answers. The circuit drives a meter containing counting mechanism. Ring-trip circuit A part of the final selectors. Function: Control the ringing current to the called party and the ringing tone to the calling party. Both the ringing current and the ringing tone are cut off by the ring-trip circuit as soon as the called party answers the call. Alarm circuit Provide visual and audible indications of any fault or undesirable condition creeping into the selector circuits. Three types of faults detected: Off-hook condition: short circuit in the subscriber line or the subscriber not having replaced his handset on the hook. Called-subscriber-held: the handset of called-subscriber is not replaced properly. Release held: sense the failure of a selector to return to home position. This is a SAMPLE (Few pages have been extracted from the complete notes:-it s meant to show you the topics covered in the full notes and as per the course outline Download more at our websites: To get the complete notes either in softcopy form or in Hardcopy (printed & Binded) form, contact us on: Call/text/whatsApp /
9 Get news and updates by liking our page on facebook and follow us on Twitter Sample/preview is NOT FOR SALE
OUTLINE OF AUTOMATIC STEP BY STEP SYSTEM. The Telephone Dial 3. Subscribers' Calling Equipment 11. Typical Numbering Scheme 14
P.O. ENGINEERING DEPARTMENT EDUCATIONAL PAMPHLET - DRAFT SERIES TELEPHONES 3/1 OUTLINE OF AUTOMATIC STEP BY STEP SYSTEM CONTENTS Page Introduction 1 The Telephone Dial 3 The Selector 4 Switching Arrangements
More informationIntroduction to Strowger
Introduction to Strowger Strowger is an exchange system built around electro-mechanical switches that can drive or be stepped around a bank of outlets. The system can be considered to have the following
More informationDIAGRAM NOTES RELATING TO GBW GROUP SELECTOR FOR UAX NZ 13. Diagrams to be considered in conjunction with this circuit are :-
DIAGRAM NOTES RELATING TO GBW 15960 GROUP SELECTOR FOR UAX NZ 13 1. GENERAL This diagram shows the circuit of the 100 outlet group selector of the 2000-typw used at a UAX NZ 13. Diagrams to be considered
More informationTELEPHONE TRANSMISSION SYSTEMS. ETI 2506 Telecommunication Systems
TELEPHONE TRANSMISSION SYSTEMS ETI 2506 Telecommunication Systems 1 BASIC ANALOGUE TELEPHONE Earphone (earpiece) The moving diaphragm produces varying sound that corresponds to the sound waves that were
More informationSignalling In Telecom
Signalling In Telecom Venkat Chowdary Mannava, Final Year BTech, K.L.University. M. Satya Manohar Raju,Final Year BTech,K.L.University. T. Ravi MTech(Ph.D) ABSTRACT: This handout discusses the growth of
More informationTELECOMMUNICAIONS SWITCHING SYSTEMS AND NETWORKS
TELECOMMUNICAIONS SWITCHING SYSTEMS AND NETWORKS 1. How are switching systems classified? In what way is stored program control (SPC) superior to hardwired control? ELECTRO MECHANICAL SWITCHING SYSTEM
More informationSubscriber loop. Claude Rigault ENST FCN, 29/09/2002 Claude Rigault, ENST 1
Subscriber loop Claude Rigault ENST claude.rigault@enst.fr FCN, 29/09/2002 Claude Rigault, ENST 1 FCN, 29/09/2002 Claude Rigault, ENST 2 2-wire / 4-wire Transformation FCN, 29/09/2002 Claude Rigault, ENST
More informationLine Signalling Fundamentals
Line Signalling Fundamentals Introduction This document refers to the types of signalling provided by and large by the PRX in its various forms across the range of delivered systems. Some of the concepts
More information)454 1 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU
INTERNATIONAL TELECOMMUNICATION UNION )454 1 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU 30%#)&)#!4)/.3 /& 3)'.!,,).' 3934%- 2 ).4%22%')34%2 3)'.!,,).' 3)'.!,,).' #/$% )454 Recommendation 1 (Extract
More informationThe Knowledge Bank at The Ohio State University. Ohio State Engineer
The Knowledge Bank at The Ohio State University Ohio State Engineer Title: Dial Telephone Systems Creators: Taylor, Jack A. Issue Date: 1945-04 Publisher: Ohio State University, College of Engineering
More informationRecommendation T/CS (Vienna 1982) ANALOGUE SUBSCRIBER LINE TESTS AND MEASUREMENTS
o T/es 54-07 E B Page 1 Recommendation T/CS 54-07 (Vienna 1982) ANALOGUE SUBSCRIBER LINE TESTS AND MEASUREMENTS Recommendation proposed by Working Group T/No. 11 Switching and Signaling (CS) Text of the
More informationThe step-by-step telephone switching system: The line finder switch
The step-by-step telephone switching system: The line finder switch Douglas A. Kerr Issue 3 June 20, 2018 ABSTRACT AND INTRODUCTION The step-by-step telephone switching system (as it is known in the Bell
More informationCall Progress Tone and Ringing Signal Generation
Exercise 1-3 Call Progress Tone and Ringing Signal Generation EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with call progress tone and ringing signal generation. DISCUSSION
More informationPart IV: Glossary of Terms
Issue 9 November 2004 Spectrum Management and Telecommunications Policy Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing
More informationExercise 1-4. Pulse Dialing
Exercise 1-4 Pulse Dialing When you have completed this exercise, you will be able to demonstrate pulse dialing, an older signaling technique to transmit telephone numbers to central offices using a series
More informationCS 621 Mobile Computing
Lecture 11 CS 621 Mobile Computing Location Management for Mobile Cellular Systems Zubin Bhuyan, Department of CSE, Tezpur University http://www.tezu.ernet.in/~zubin Several slides and images in this presentation
More informationThe Panel Dial Telephone Switching System Interoperation with Manual Switching Systems
The Panel Dial Telephone Switching System Interoperation with Manual Switching Systems Douglas A. Kerr Issue 4 June 18, 2018 ABSTRACT AND INTRODUCTION The panel dial system was a very complex telephone
More information1.4 OPERATING INSTRUCTIONS
1.4 OPERATING INSTRUCTIONS I -. 1.4.1 1.4.2 1.4.3 1.4.4 1.45 1.4.6 1.4.7 1.4.8 1.4.9 Station Nomenclature Station Lamp Signals DSS Console Lamp Signals System Tones Outside Calls - Outgoing 1.4.5.1 Seizing
More informationHistory of Communication
1 History of Communication Required reading: Forouzan Ch. 1 Garcia 1.1 and 1.2 CSE 3213, Fall 2015 Instructor: N. Vlajic History of Telecommunications 2 Papyrus 3000 BC http://www.prologprintmedia.co.uk/news-whats-next-in-the-evolution-of-communication
More information!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" A624 Feature / Programming Overview The A624 has many new and changed features compared with the 30810 / 61610 This Guide is intended to assist installers
More informationThe panel dial telephone switching system
The panel dial telephone switching system Douglas A. Kerr Issue 6 June 15, 2018 ABSTRACT In the 1910s, AT&T, the parent of the Bell Telephone System, anxious to reduce the stupendous labor costs of manual
More informationSuppliers' Information Note. BT Public Switched Telephone Network (PSTN): Technical Characteristics Of The Multi-Line Analogue Line Interface
SIN 352 Issue 2.7 June 2018 Suppliers' Information Note For The BT Network BT Public Switched Telephone Network (PSTN): Technical Characteristics Of The Multi-Line Analogue Line Interface Each SIN is the
More informationThe Communiqué Digital Telephone Station
The Communiqué Digital Telephone Station Press the Security* and 1 Automation* keys to access your security system and any home automation features, respectively (optional: see below). Press and hold the
More information- 1 - Rep. ITU-R M.2009 REPORT ITU-R M.2009 DIRECT-DIAL TELEPHONE SYSTEMS FOR THE MARITIME MOBILE SERVICE
- 1 - REPORT ITU-R M.2009 DIRECT-DIAL TELEPHONE SYSTEMS FOR THE MARITIME MOBILE SERVICE (1995) General Although the DSC system may be used to establish fully automatic systems in the directions ship-to-shore,
More informationThanks for selecting PREMIER QUANTUM Series for your requirement of Voice Communication Quantum series comes in four models expandable up to
Thanks for selecting PREMIER QUANTUM Series for your requirement of Voice Communication Quantum series comes in four models. 1. 416 expandable up to 816 2. 416 expandable up to 424 3. 424 expandable up
More informationTRANSMISSION AND SWITCHING: CORNERSTONES OF A NETWORK
4 TRANSMISSION AND SWITCHING: CORNERSTONES OF A NETWORK 4.1 TRANSMISSION AND SWITCHING DEFINED The IEEE defines transmission as the propagation of a signal, message, or other form of intelligence by any
More informationWIRELESS COMMUNICATION STUDY NOTES
WIRELESS COMMUNICATION STUDY NOTES TOPIC 1 OVERVIEW AND EVOLUTION OF WIRELESS COMMUNICATION CHAPTER ONE CONTENTS 0 Introduction 0 Objectives 23 Main Content 23 Concept of Wireless Communication Wireless
More informationNEW ZEALAND POST OFFICE ENGINEERING REPORT
NEW ZEALAND POST OFFICE ENGINEERING REPORT ER/TP 1048 BASIS OF DESIGN : N.Z. UNIT TYPE AUTOMATIC EXCHANGE SYSTEMS ENGINEER-IN-CHIEF S OFFICE GENERAL POST OFFICE WELLINGTON (FOR OFFICIAL USE ONLY) NEW ZEALAND
More informationThe step-by-step telephone switching system: Overview
The step-by-step telephone switching system: Overview Douglas A. Kerr Issue 1 March 31, 2018 ABSTRACT AND INTRODUCTION The step-by-step telephone switching system (as it is known in the Bell Telephone
More informationWIRELESS TERMINAL EQUIPMENT. ETI TELECOMMUNICATIONS Monday, 10 October 2016
WIRELESS TERMINAL EQUIPMENT ETI2506 - TELECOMMUNICATIONS Monday, 10 October 2016 1 CLASSIFICATION OF MOBILE RADIO TRANSMISSION 1. Simplex radio systems utilize simplex channels i.e., the communication
More informationUCS-805 MOBILE COMPUTING NIT Agartala, Dept of CSE Jan-May,2011
Location Management for Mobile Cellular Systems SLIDE #3 UCS-805 MOBILE COMPUTING NIT Agartala, Dept of CSE Jan-May,2011 ALAK ROY. Assistant Professor Dept. of CSE NIT Agartala Email-alakroy.nerist@gmail.com
More informationS Signaling Protocols
S38.3115 Signaling Protocols PSTN Modeling of signaling systems Signaling flow charts (Extended) Finite state machines Classification of Legacy Signaling Systems Subscriber signaling Impulse code Multifrequency
More information) ,4)&2%15%.#9 053("544/. 3)'.!, 2%#%04)/. '%.%2!, 2%#/--%.$!4)/.3 /. 4%,%0(/.% 37)4#().'!.$ 3)'.!,,).'
INTERNATIONAL TELECOMMUNICATION UNION )454 1 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU '%.%2!, 2%#/--%.$!4)/.3 /. 4%,%0(/.% 37)4#().'!.$ 3)'.!,,).' ).4%2.!4)/.!,!54/-!4)#!.$ 3%-)!54/-!4)# 7/2+).'
More informationDesign and Construction of Microcontroller- Based Telephone Exchange System
Design and Construction of Microcontroller- Based Telephone Exchange System Aye Sandar Win International Science Index, Electrical and Information Engineering waset.org/publication/3916 Abstract This paper
More informationMAGNETO AND C.B.S. WORKING
MM. 22.6.2 P.O. ENGINEERING DEPARTMENT EDUCATIONAL PAMPHLET - DRAFT SERIES TELEPHONES 2/2 MAGNETO AND C.B.S. WORKING introduction CONTENTS Page The Magneto System 2 Central Battery Signalling (C.B.S.)
More informationIntroduction. AM7 Central Office Simulator with option boards
Introduction The Ameritec Model AM7 CO Simulator is capable of simulating many of the functions of Central Office switches, PABX switches or the Public Switched Telephone Network (PSTN). The AM7 is user
More informationMOBILE COMPUTING NIT Agartala, Dept of CSE Jan-May,2012
Location Management for Mobile Cellular Systems MOBILE COMPUTING NIT Agartala, Dept of CSE Jan-May,2012 ALAK ROY. Assistant Professor Dept. of CSE NIT Agartala Email-alakroy.nerist@gmail.com Cellular System
More informationConventional Telephony. Engr. Cyrill O. Escolano Contract of Service Instructor College of Engineering Southern Luzon State University
Conventional Telephony Engr. Cyrill O. Escolano Contract of Service Instructor College of Engineering Southern Luzon State University Telephone People Behind Innocenzo Manzetti Antonio Meucci Johann Philipp
More informationTLS-3A. Telephone Line Simulator. User Manual , Rev. B Covers Model TLS-3A-01
User Manual TLS-3A Telephone Line Simulator 40-400-00010, Rev. B Covers Model TLS-3A-01 Teltone Corporation 22121-20th Avenue SE Bothell, Washington 98021-4408 USA Phone: 1-800-426-3926 or 425-487-1515
More informationInternational maritime VHF radiotelephone system with automatic facilities based on DSC signalling format
Recommendation ITU-R M.689-3 (03/2012) International maritime VHF radiotelephone system with automatic facilities based on DSC signalling format M Series Mobile, radiodetermination, amateur and related
More informationPart I: Requirements for Terminal Equipment (TE) and Related Access Arrangements Intended for Direct Connection to Analog Wireline Facilities
Issue 9, Amendment 5 March 2016 Spectrum Management and Telecommunications Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing
More informationCompliance Requirements Overview 1
Compliance Requirements Overview The standard two-wire telephone-set connection known as analog PSTN (Public Switched Telephone Network) (loop start) or POTS (Plain Old Telephone Service) is the oldest
More informationSuppliers' Information Note. BT Public Switched Telephone Network (PSTN): Technical Characteristics Of The Single Analogue Line Interface
SIN 351 Issue 4.8 October 2017 Suppliers' Information Note For The BT Network BT Public Switched Telephone Network (PSTN): Technical Characteristics Of The Single Analogue Line Interface Each SIN is the
More informationCHAPTER 1 : INTRODUCTION
1 CHAPTER 1 : INTRODUCTION 1.1. Introduction to Dual Tone Multi Frequency (DTMF) DTMF is a way for instructing a telephone switching system of the telephone number to be dial, or to concern commands to
More informationETSI ES V1.1.1 ( )
ES 201 970 V1.1.1 (2002-08) Standard Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics at a 2-wire analogue presented
More informationEG V1.1.1 ( )
EG 201 188 V1.1.1 (1999-06) Guide Public Switched Telephone Network (PSTN); Network Termination Point (NTP) analogue interface; Specification of physical and electrical characteristics at a 2-wire analogue
More informationExercise 9. Electromagnetism and Inductors EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Magnetism, magnets, and magnetic field
Exercise 9 Electromagnetism and Inductors EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the concepts of magnetism, magnets, and magnetic field, as well as electromagnetism
More informationTelephone Instruments and Signals The Telephone Circuit
TELEPHONE INSTRUMENTS AND SIGNALS The Subscriber Loop, Standard Telephone Set, Basic Telephone Call Procedures, Call Progress Tones and Signals, Cordless Telephones, Caller ID, Electronic Telephones, Paging
More informationSynchronism Check Equipment
MULTILIN GER-2622A GE Power Management Synchronism Check Equipment SYNCHRONISM CHECK EQUIPMENT K. Winick INTRODUCTION Synchronism check equipment is that kind of equipment that is used to check whether
More informationPROTECTION SIGNALLING
PROTECTION SIGNALLING 1 Directional Comparison Distance Protection Schemes The importance of transmission system integrity necessitates high-speed fault clearing times and highspeed auto reclosing to avoid
More informationGSM-4 (program version 4.02)
COMMUNICATION MODULE GSM-4 (program version 4.02) OPERATING INSTRUCTION GDAŃSK, POLAND gsm4_e 11/03 WARNING For safety reasons, the module should only be installed by qualified personnel. In order to avoid
More informationETSI TS V1.1.1 ( )
TS 102 971 V1.1.1 (2005-05) Technical Specification Access and Terminals (AT); Public Switched Telephone Network (PSTN); Harmonized specification of physical and electrical characteristics of a 2-wire
More informationMOBILE COMPUTING 4/8/18. Basic Call. Public Switched Telephone Network - PSTN. CSE 40814/60814 Spring Transit. switch. Transit. Transit.
MOBILE COMPUTING CSE 40814/60814 Spring 2018 Public Switched Telephone Network - PSTN Transit switch Transit switch Long distance network Transit switch Local switch Outgoing call Incoming call Local switch
More informationTELE4652 Mobile and Satellite Communications
Mobile and Satellite Communications Lecture 1 Introduction to Cellular Mobile Communications Public Switched Telephone Networks (PSTN) Public Land Mobile Networks (PLMN) evolved from the PSTN - Aimed to
More informationDraft ES V1.1.2 ( )
Standard Public Switched Telephone Network (PSTN); Protocol over the local loop for display services; Server Display and Script Services (SDSS) [European adaptation of Bellcore SR-INS-002461 and TR-NWT-001273]
More informationSection 10.3 Telephones
Section 10.3 Telephones Telephones allow you to talk to friends over great distances by measuring the sound of one person's voice and recreating that sound in another person's ear. Telephones perform this
More informationSTUDY NOTES UNIT I IMAGE PERCEPTION AND SAMPLING. Elements of Digital Image Processing Systems. Elements of Visual Perception structure of human eye
DIGITAL IMAGE PROCESSING STUDY NOTES UNIT I IMAGE PERCEPTION AND SAMPLING Elements of Digital Image Processing Systems Elements of Visual Perception structure of human eye light, luminance, brightness
More information3.6. Cell-Site Equipment. Traffic and Cell Splitting Microcells, Picocelles and Repeaters
3.6. Cell-Site Equipment Traffic and Cell Splitting Microcells, Picocelles and Repeaters The radio transmitting equipment at the cell site operates at considerably higher power than do the mobile phones,
More informationREFERENCE 1 A 1 KEY TELEPHONE SYSTEM. "TOUCH-TONE n ADAPTERS
BELL SYSTEM PRACTICES AT&TCo Standard Issue 2, September 1971 REFERENCE 1 A 1 KEY TELEPHONE SYSTEM "TOUCH-TONE n ADAPTERS 1. GENERAL 1.01 This section is reissued to change relay designation H3 to L3 for
More informationEXERCISE OBJECTIVE DISCUSSION Introduction 2-31
Exercise 2-3 Two-Dimensional Switching EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with two-dimensional switching. DISCUSSION Introduction The first two exercises of
More informationTS V1.1.1 ( )
Technical Specification Corporate telecommunication Networks (CN); CEPT signalling systems (L1 and L2) for analogue inter-pabx lines European Telecommunications Standards Institute 2 Reference DTS/CN-00006
More informationTNA 102. Characteristics of the Spark Analogue Telephone Network Customer Interface. TNA 102: October 2017 DRAFT FOR COMMENT.
TNA 102 Characteristics of the Spark Analogue Telephone Network Customer Interface DRAFT FOR COMMENT Access Standards Spark Limited Wellington NEW ZEALAND October 2017 1 CONTENTS REFERENCES 2 FOREWARD
More informationEDACS SYSTEM MANAGER. User s Guide. Mobile Communications. User s Guide For Version 3.XX (Group 3) LBI-38984
Mobile Communications EDACS SYSTEM MANAGER (Enhanced Digital Access Communications System) User s Guide For Version 3.XX (Group 3) User s Guide TABLE OF CONTENTS Page Section/Paragraph INTRODUCTION..................................................
More informationINCOMING SELECTOR CIRCUITS FROM PANEL LOCAL, OFFICE TANDEM AND PANEL SENDER TANDEM OFFICES MANUAL TEST USING TEST SET ES OR ES
BELL SYSTEM PRACTICES Plant Series INCOMING SELECTOR CIRCUITS FROM PANEL LOCAL, OFFICE TANDEM AND PANEL SENDER TANDEM OFFICES MANUAL TEST USING TEST SET ES-20150-01 OR ES-239844,,, I' I Issue 3, November,
More informationContents 1. FEATURES EQUIPMENT DESCRIPTION INSTALLATION OPERATION TROUBLESHOOTING SPECIFICATIONS...
Contents 1. FEATURES... 3 2. EQUIPMENT DESCRIPTION... 3 3. INSTALLATION... 5 4. OPERATION... 5 5. TROUBLESHOOTING... 7 6. SPECIFICATIONS... 8 2 1. FEATURES Telephone Foreign Exchange Subscriber (FXS) Service:
More informationFigure FXS Front Panel. Figure FXS Front Panel
Telecommunications Group Section 365-780-202 Equipment Issue 2 Fifth Printing, October 2006 12-Channel (3657-80) and 6-Channel (3657-81) 2-Wire Foreign Exchange Subscriber, Private Line Automatic Ringdown
More informationFaculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad
Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad EXPERIMENT #2 UNDERSTANDING TELEPHONE BASICS Telephone components: 1. Handset containing
More informationVC-4/4A, VC-8/8A, VC-16
Data Sheet Megaplex-4, Megaplex-2100/2104 VC-4/4A, VC-8/8A, VC-16 E&M, FXS or FXO options Caller ID A-law or µ-law companding Optional inband signaling with A-law encoded channels PCM (64 kbps) and ADPCM
More informationChapter 2: Global System for Mobile Communication
Chapter 2: Global System for Mobile Communication (22 Marks) Introduction- GSM services and features, GSM architecture, GSM channel types, Example of GSM Call: GSM to PSTN call, PSTN to GSM call. GSM frame
More informationS.C.C.-Va.-No Verizon Virginia LLC. in the State of Virginia as provided herein
Original Title Regulations, Rates and Charges applying to the provision of Access Services within a Local Access and Transport Area (LATA) for connection to intrastate communications facilities for customers
More informationExercise 2-1. Battery Feed Power Supply
Exercise 2-1 Battery Feed Power Supply When you have completed this exercise, you will be able to demonstrate how the central office supplies power to analog telephone sets. A telephone set requires electrical
More informationFrame structure for a (E1) 30-channel connection. Channel 1 15 Channel (15 * 64kbps) (15 * 64kbps) &Alarms
CAS A Novice Guide Introduction CAS stands for Channel Associated Signalling. With this method of signalling each traffic channel has a dedicated signalling channel. In other words the signalling for a
More informationExercise 1-1. Architecture of a Digital PABX EXERCISE OBJECTIVE
Exercise 1-1 Architecture of a Digital PABX EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the architecture of a digital PABX (the Lab-Volt PABX). You will be able
More informationT106 INSTALLATION and MAINTENANCE MANUAL CONTENTS
T106 INSTALLATION and MAINTENANCE MANUAL CONTENTS I. 1.1 1.2 GENERAL INTRODUCTION WARNINGS l-l l-l 1.3 1.4 CAPACITY AND STATION CONFIGURATION l-2 EQUIPMENT FEATURES 1.4.1 Main Equipment Features l-4 1.4.2
More informationGROUND ROUTING PROTOCOL FOR USE WITH AUTOMATIC LINK ESTABLISHMENT (ALE) CAPABLE HF RADIOS
GROUND ROUTING PROTOCOL FOR USE WITH AUTOMATIC LINK ESTABLISHMENT (ALE) CAPABLE HF RADIOS October 2002 I FOREWORD 1. The Combined Communications-Electronics Board (CCEB) is comprised of the five member
More informationODMA Opportunity Driven Multiple Access
ODMA Opportunity Driven Multiple Access by Keith Mayes & James Larsen Opportunity Driven Multiple Access is a mechanism for maximizing the potential for effective communication. This is achieved by distributing
More informationSatellite Terminal. Installation Guide. Release 2.2 Ref. nr
Satellite Terminal Installation Guide Release 2.2 Ref. nr. 37628 Table of Contents Table of Contents Table of Contents... 2 1 Introduction... 3 1.1 About this Guide... 3 1.2 Material Provided in the Box...
More informationASTRO/Intercom System
ASTRO/Intercom System SISTEMA QUALITÀ CERTIFICATO ISO 9001 ISO 9001 CERTIFIED SYSTEM QUALITY F I T R E S.p.A. 20142 MILANO ITALIA via Valsolda, 15 tel.: +39.02.8959.01 fax: +39.02.8959.0400 e-mail: fitre@fitre.it
More informationETSI EG V1.1.3 ( )
EG 201 121 V1.1.3 (2000-02) Guide A guide to the application of TBR 21 2 EG 201 121 V1.1.3 (2000-02) Reference REG/ATA-005073bis Keywords PSTN, terminal Postal address F-06921 Sophia Antipolis Cedex -
More informationElectronic Pipeline Technology
Pipe and Cable Locator Pearson Holiday Detector Model EPT- 1000 Electronic Pipeline Technology Electronic Pipeline Technology 26 Palomino Drive, Richmond Hill, Ontario, Canada, L4C 0P8 Tel: (905) 918-0025
More informationVoice Communication Control System Specification for CWP Tungmahamek. Voice Communication Control System Specification. For.
Voice Communication Control System Specification for CWP Tungmahamek Voice Communication Control System Specification For CWP Tungmahamek VCCS Specification For MK 16-10-2015 1 Table of Contents 1. INTRODUCTION...
More information)454 1 '%.%2!,!30%#43 /& 05",)#,!.$ -/"),%.%47/2+3 05",)#,!.$ -/"),%.%47/2+3. )454 Recommendation 1 INTERNATIONAL TELECOMMUNICATION UNION
INTERNATIONAL TELECOMMUNICATION UNION )454 1 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU 05",)#,!.$ -/"),%.%47/2+3 '%.%2!,!30%#43 /& 05",)#,!.$ -/"),%.%47/2+3 )454 Recommendation 1 (Extract from the
More informationSummary. Rec. ITU-R M RECOMMENDATION ITU-R M *
Rec. ITU-R M.492-6 1 RECOMMENDATION ITU-R M.492-6 * Rec. ITU-R M.492-6 OPERATIONAL PROCEDURES FOR THE USE OF DIRECT-PRINTING TELEGRAPH EQUIPMENT IN THE MARITIME MOBILE SERVICE (Question ITU-R 5/8) (1974-1978-1982-1986-1990-1992-1995)
More informationT-1048 ISSUE 2 - ~ CARLSON TYPE C TEST TU. Operating Instruction
T1048 ISSUE 2 BT ~ CARLSON TYPE C TEST TU Operating Instruction T1048 ISSUE 2 STROMBERGCARLSON TYPE C TEST TURRET Operating Instructions TABLE OF CONTENTS PARAGRAPH INTRODUCTION PURPOSE AND USE... 1 a.
More informationOEM WIRELESS DIALLER INSTALLATION & USER MANUAL. (Product No )
OEM WIRELESS DIALLER INSTALLATION & USER MANUAL (Product No. 100-023) CONTENTS 1. INTRODUCTION... 2 2. FEATURES... 2 3. EQUIPMENT LIST... 3 4. INSTALLATION... 3 5. PROGRAM MODE... 4 5.1 To Enter Program
More informationUNIT I THEORY OF METAL CUTTING
THEORY OF METAL CUTTING & TOOL DESIGN UNIT I THEORY OF METAL CUTTING INTRODUCTION In an industry, metal components are made into different shapes and dimensions by using various metal working processes.
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ELEC 225 TELECOMMUNICATIONS
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ELEC 225 TELECOMMUNICATIONS Prepared By: Stephen E. Frempong SCHOOL OF ENGINEERING TECHNOLOGY ELECTRICAL ENGINEERING DEPARTMENT
More informationWI-LAN Inc. v. Alcatel-Lucent USA Inc. et al Doc. 182 Att. 2 EXHIBIT I. Dockets.Justia.com
WI-LAN Inc. v. Alcatel-Lucent USA Inc. et al Doc. 182 Att. 2 EXHIBIT I Dockets.Justia.com WIL-192825 United States Patent [19] Uola 111111111111111111111111111111111111111111111111111111111111111111111111111
More informationData and Computer Communications. Chapter 10 Cellular Wireless Networks
Data and Computer Communications Chapter 10 Cellular Wireless Networks Cellular Wireless Networks 5 PSTN Switch Mobile Telecomm Switching Office (MTSO) 3 4 2 1 Base Station 0 2016-08-30 2 Cellular Wireless
More informationchange (PABX) systems. There must, however, be isolation between and the higher voltage, transientprone
Ring Detection with the HCPL-00 Optocoupler Application Note 0 Introduction The field of telecommunications has reached the point where the efficient control of voice channels is essential. People in business
More informationChapter 3. Communication and Data Communications Table of Contents
Chapter 3. Communication and Data Communications Table of Contents Introduction to Communication and... 2 Context... 2 Introduction... 2 Objectives... 2 Content... 2 The Communication Process... 2 Example:
More information3. Telephone. From Wikipedia: Telephone 최양희서울대학교컴퓨터공학부
3. Telephone From Wikipedia: Telephone 최양희서울대학교컴퓨터공학부 Overview The telephone (from the Greek words tele (τηλέ) = far and phone (φωνή) = voice) is a telecommunications device that is used to transmit and
More informationFunction Key Settings THE TAIT ORCA 5000 CORPORATE HEAD OFFICE NEW ZEALAND. Tait Electronics Ltd CANADA. P O Box 1645, Christchurch
Custom Settings 5015 CONVENTIONAL TAIT ORCA Function Key Settings Short Press Long Press THE TAIT ORCA 5000 F1: CORPORATE HEAD OFFICE SERIES OF F2: Ext1: Ext2: Handset Mode Volume Keys Volume Up: Volume
More informationSERVICE MANUAL PARTS LIST MODEL: NH40
SERVICE MANUAL & PARTS LIST MODEL: NH40 CONTENTS What to do when... 1-3 SERVICE ACCESS Face Cover... 4 Bed Cover... 5 Free-arm Cover... 6 Front Cover... 7 Rear Cover... 8 MECHANICAL ADJUSTMENT Presser
More informationSYSTEM ACCESS CODES. CODE: GA A ED: 01 AUGUST 1998 Printed In Korea
SYSTEM ACCESS CODES The DCS telephone system has the following pre-set (default) feature access codes. These codes can be used if a key is not available for the feature you want to use. Standard telephone
More informationXen IPK II ANALOGUE TELEPHONE User Guide
Xen IPK II ANALOGUE TELEPHONE User Guide Table of Contents General Information............................... 3 Answering Calls.................................. 3 Making Calls.....................................
More informationEUROPEAN ETS TELECOMMUNICATION January 1998 STANDARD
EUROPEAN ETS 300 778-2 TELECOMMUNICATION January 1998 STANDARD Source: ATA Reference: DE/ATA-005062-2 ICS: 33.020 Key words: PSTN, CLIP, supplementary services Public Switched Telephone Network (PSTN);
More informationIntroduction to IS-95 CDMA p. 1 What is CDMA p. 1 History of CDMA p. 2 Forms of CDMA p MHz CDMA p MHz CDMA (PCS) p. 6 CDMA Parts p.
Introduction to IS-95 CDMA p. 1 What is CDMA p. 1 History of CDMA p. 2 Forms of CDMA p. 3 800 MHz CDMA p. 6 1900 MHz CDMA (PCS) p. 6 CDMA Parts p. 7 Mobile Station p. 8 Base Station Subsystem (BSS) p.
More informationClick here to have this read to you
TELEPHONE Click here to have this read to you Telephone Alexander Graham Bell developed the first successful telephone in 1876. By the end of the 20th century, more than 800 million telephones were installed
More informationThis document is designed to be used in conjunction with the CMX869A data sheet.
CML Microcircuits COMMUICATIO SEMICODUCTORS Publication: A/Telecom/869A/1 May 2006 Application ote Bell 212A Implementation with CMX869A 1 Introduction The Bell 212A data communications protocol, originally
More information