Standard 0603 SMD LED

Transcription

1 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY Standard 63 SMD LED 856 DESCRIPTION The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller products of higher performance more design in flexibility enhanced applications The 63 LED is an obvious solution for small-scale, high power products that are expected to work reliability in an arduous environment. PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: SMD 63 Product series: standard Angle of half intensity: ± 8 EATURES Smallest SMD package 63 with exceptional brightness.6 mm x.8 mm x.6 mm (L x W x H) High reliability lead frame based Temperature range - 4 C to + C ootprint compatible to 63 chipled Wavelength 47 nm (blue), 57 nm (green), 56 nm (pure green), 587 nm (yellow), 66 nm (orange), 633 nm (red) AllnGaP and GaN technology Viewing angle: extremely wide 6 Grouping parameter: luminous intensity, wavelength Available in 8 mm tape Compatible to IR reflow soldering Compliant to RoHS Directive /95/EC and in accordance to WEEE /96/EC Preconditioning: acc. to JEDEC level AEC-Q qualified APPLICATIONS Backlight keypads Navigation systems Cellular phone displays Displays for industrial control systems Automotive features Miniaturized color effects Traffic displays PARTS TABLE PART TLMS-GS8 TLMO-GS8 TLMY-GS8 TLMG-GS8 TLMP-GS8 TLMB-GS8 COLOR, LUMINOUS INTENSITY AT Red, I V = 63 mcd (typ.) Orange, I V = 8 mcd (typ.) Yellow, I V = 8 mcd (typ.) Green, I V = 35 mcd (typ.) Pure green, I V = 5 mcd (typ.) Blue, I V = 5 mcd (typ.) ** Please see document Vishay Material Category Policy : /doc?999 Document Number 8373 Rev.., 7-eb-

2 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY ABSOLUTE MAXIMUM RATINGS ) TLMS, TLM, TLMY, TLMG, TLMP PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage ) V R V DC orward current T amb 75 C 3 ma Surge forward current t p µs SM.5 A Power dissipation P V 9 mw Junction temperature T j C Operating temperature range T amb - 4 to + C Storage temperature range T stg - 4 to + C Soldering temperature acc. Vishay spec. T sd 6 C Thermal resistance junction/ ambient mounted on PC board (pad size > 5 mm ) ) T amb = 5 C, unless otherwise specified ) Driving the LED in reverse direction is suitable for short term application R thja 48 K/W ABSOLUTE MAXIMUM RATINGS ) TLMB PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage ) V R 5 V DC orward current T amb 6 C 5 ma Surge forward current t p µs SM. A Power dissipation P V 68 mw Junction temperature T j C Operating temperature range T amb - 4 to + C Storage temperature range T stg - 4 to + C Soldering temperature acc. Vishay spec. T sd 6 C Thermal resistance junction/ ambient mounted on PC board (pad size > 5 mm ) ) T amb = 5 C, unless otherwise specified ) Driving the LED in reverse direction is suitable for short term application R thja 48 K/W OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMS, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I V 3 63 mcd Dominant wavelength d nm Peak wavelength p 645 nm Angle of half intensity ± 8 deg orward voltage V. 3. V Reverse voltage I R = µa V R 6 V Junction capacitance V R =, f = MHz C j 5 p ) T amb = 5 C, unless otherwise specified Document Number 8373 Rev.., 7-eb-

3 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMO, ORANGE PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I V 5 8 mcd Dominant wavelength d nm Peak wavelength p 6 nm Angle of half intensity ± 8 deg orward voltage V. 3 V Reverse voltage I R = µa V R 6 V Junction capacitance V R =, f = MHz C j 5 p ) T amb = 5 C, unless otherwise specified OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMY, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I V 5 8 mcd Dominant wavelength d nm Peak wavelength p 59 nm Angle of half intensity ± 8 deg orward voltage V. 3 V Reverse voltage I R = µa V R 6 V Junction capacitance V R =, f = MHz C j 5 p ) T amb = 5 C, unless otherwise specified OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMG, GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I V.5 35 mcd Dominant wavelength d nm Peak wavelength p 57 nm Angle of half intensity ± 8 deg orward voltage V. 3. V Reverse voltage I R = µa V R 6 V Junction capacitance V R =, f = MHz C j 5 p ) T amb = 5 C, unless otherwise specified OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMP, PURE GREEN PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I V mcd Dominant wavelength d nm Peak wavelength p 555 nm Angle of half intensity ± 8 deg orward voltage V. 3 V Reverse voltage I R = µa V R 6 V Junction capacitance V R =, f = MHz C j 5 p ) T amb = 5 C, unless otherwise specified Document Number 8373 Rev.., 7-eb- 3

4 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY OPTICAL AND ELECTRICAL CHARACTERISTICS ) TLMB, BLUE PARAMETER TEST CONDITION SYMBOL MIN TYP. MAX UNIT Luminous intensity = ma I V 4 5 mcd Dominant wavelength = ma d 466 nm Peak wavelength = ma p 48 nm Angle of half intensity = ma ± 8 deg orward voltage V V Reverse voltage I R = µa V R 5. V ) T amb = 5 C, unless otherwise specified COLOR CLASSIICATION GROUP DOMINANT WAVELENGTH (nm) BLUE PURE GREEN GREEN YELLOW ORANGE MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX Wavelengths are tested at a current pulse duration of 5 ms and an accuracy of ± nm LUMINOUS INTENSITY CLASSIICATION GROUP LUMINOUS INTENSITY (mcd) MIN. MAX. Pa Pb 5 8 Qa 6.3 Qb 8.5 Ra 6 Rb.5 Sa 6 5 Sb 3 Ta 5 4 Tb 3 5 Ua 4 63 Ub 5 8 Va 63 Vb 8 5 Wa 6 Wb 5 Luminous intensity is tested at a current pulse duration of 5 ms and an accuracy of ± %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable. 4 Document Number 8373 Rev.., 7-eb-

5 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY GROUP NAME ON LABEL LUMINOUS INTENSITY GROUP HALGROUP WAVELENGTH Q b 4 One packing unit/tape contains only one classification group of luminous intensity, color and forward voltage. Only one single classification groups is not available. The given groups are not order codes, customer specific group combinations require marketing agreement. No color subgrouping for super red. TYPICAL CHARACTERISTICS T amb = 5 C, unless otherwise specified - orward Current (ma) I Vrel - Relative Luminous Intensity orange T amb - Ambient Temperature ( C) igure. orward Current vs. Ambient Temperature T amb - Ambient Temperature ( C) igure 3. Relative Luminous Intensity vs. Amb. Temperature - Change of Dom. Wavelength (nm) d orange T amb - Ambient Temperature ( C) igure. Change of Dominant Wavelength vs. Ambient Temperature.4.35 orange T am b - Ambient Temperature ( C) V - orward Voltage (V) igure 4. orward Voltage vs. Ambient Temperature Document Number 8373 Rev.., 7-eb- 5

6 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY orange blue I - orward Current (ma) - orward Current (ma) V - orward Voltage (V) igure 5. orward Current vs. orward Voltage T amb - Ambient Temperature ( C) igure 8. orward Current vs. Ambient Temperature I - Relative Luminous Intensity Vrel 99. orange. - orward Current (ma) igure 6. Relative Luminous Intensity vs. orward Current - Change of Dom. Wavelength (nm) d blue = ma T amb - Ambient Temperature ( C) igure 9. Change of Dominant Wavelength vs. Ambient Temperature P V - Power Dissipation (mw) blue T amb - Ambient Temperature ( C) igure 7. Power Dissipation vs. Ambient Temperature I V rel - Relative Luminous Intensity. blue = ma T amb - Ambient Temperature ( C) igure. Relative Luminous Intensity vs. Amb. Temperature 6 Document Number 8373 Rev.., 7-eb-

7 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY V - orward Voltage (V) blue = ma T amb - Ambient Temperature ( C) igure. orward Voltage vs. Ambient Temperature - Change of Dom. Wavelength (nm) d pure green T amb - Ambient Temperature ( C) igure 4. Change of Dominant Wavelength vs. Ambient Temperature - orward Current (ma) blue I Vrel - Relative Luminous Intensity pure green V - orward Voltage (V) T amb - Ambient Temperature ( C) igure. orward Current vs. orward Voltage igure 5. Relative Luminous Intensity vs. Amb. Temperature I V rel - Relative Luminous Intensity blue orward Current (ma) igure 3. Relative Luminous Intensity vs. orward Current.4.35 pure green T amb - Ambient Temperature ( C) V - orward Voltage (V) igure 6. orward Voltage vs. Ambient Temperature Document Number 8373 Rev.., 7-eb- 7

8 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY I - orward Current (ma) pure green I Vrel - Relative Luminous Intensity green V - orward Voltage (V) T am b - Ambient Temperature ( C) igure 7. orward Current vs. orward Voltage igure. Relative Luminous Intensity vs. Amb. Temperature I - Relative Luminous Intensity Vrel. pure green. 9 - orward Current (ma) igure 8. Relative Luminous Intensity vs. orward Current.4.35 green T amb - Ambient Temperature ( C) V - orward Voltage (V) igure. orward Voltage vs. Ambient Temperature - Change of Dom. Wavelength (nm) d green T amb - Ambient Temperature ( C) igure 9. Change of Dominant Wavelength vs. Ambient Temperature - orward Current (ma) green V - orward Voltage (V) igure. orward Current vs. orward Voltage 8 Document Number 8373 Rev.., 7-eb-

9 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY I Vrel - Relative Luminous Intensity. green. 9 - orward Current (ma) igure 3. Relative Luminous Intensity vs. orward Current V - orward Voltage (V).4.35 yellow T amb - Ambient Temperature ( C) igure 6. orward Voltage vs. Ambient Temperature - Change of Dom. Wavelength (nm) yellow I - orward Current (ma) yellow d T amb - Ambient Temperature ( C) V - orward Voltage (V) igure 4. Change of Dominant Wavelength vs. Ambient Temperature igure 7. orward Current vs. orward Voltage I V rel - Relative Luminous Intensity yellow T amb - Ambient Temperature ( C) igure 5. Relative Luminous Intensity vs. Amb. Temperature I - Relative Luminous Intensity Vrel. yellow orward Current (ma) igure 8. Relative Luminous Intensity vs. orward Current Document Number 8373 Rev.., 7-eb- 9

10 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY - Change of Dom. Wavelength (nm) red I - orward Current (ma) red d T amb - Ambient Temperature ( C) igure 9. Change of Dominant Wavelength vs. Ambient Temperature V - orward Voltage (V) igure 3. orward Current vs. orward Voltage I Vrel - Relative Luminous Intensity red = ma T am b - Ambient Temperature ( C) igure 3. Relative Luminous Intensity vs. Amb. Temperature I V rel - Relative Luminous Intensity red orward Current (ma) igure 33. Relative Luminous Intensity vs. orward Current V - orward Voltage (V) red T amb - Ambient Temperature ( C) igure 3. orward Voltage vs. Ambient Temperature Document Number 8373 Rev.., 7-eb-

11 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY REEL DIMENSIONS in millimeters 943 Document Number 8373 Rev.., 7-eb-

12 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY TAPE DIMENSIONS in millimeters 944 Document Number 8373 Rev.., 7-eb-

13 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY PACKAGE DIMENSIONS in millimeters 946 Document Number 8373 Rev.., 7-eb- 3

14 TLMB, TLMG, TLMO, TLMP, TLMS, TLMY SOLDERING PROILE Temperature ( C) C 4 C 7 C IR Reflow Soldering Profile for lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level max. s max. Ramp Up 3 C/s max. 3 s max. s max. 6 C 45 C max. Ramp Down 6 C/s Time (s) max. cycles allowed igure 34. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-C) DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. RECOMMENDED METHOD O STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: Storage temperature C to 3 C Storage humidity 6 % RH max. After more than year under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 9 h at 4 C + 5 C/- C and < 5 % RH (dry air/nitrogen) or 96 h at 6 C + 5 C and < 5 % RH for all device containers or 4 h at C + 5 C not suitable for reel or tubes. An EIA JEDEC standard JESD-A level label is included on all dry bags. Aluminum bag Label Reel Example of JESD-A level label INAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain specific data. 4 Document Number 8373 Rev.., 7-eb-

15 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, UNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 Revision: -Mar-