November Clamp filters (Ferrite core with case) For cable. ZCAT series ZCAT ZCAT-A ZCAT-B ZCAT-D ZCAT-DT. Caution
|
|
- Cecily Harper
- 6 years ago
- Views:
Transcription
1 E M C C o m p o n e n t s November 207 Clamp filters (Ferrite core with case) For cable ZCAT series ZCAT ZCAT-A ZCAT-B ZCAT-D ZCAT-DT Caution
2 (2/6) Products in this catalog are in preparation for mass production. Part No. ZCAT DT(-BK) ZCAT DT(-BK) ZCAT DT(-BK) Status Not recommended to a new design Not recommended to a new design Not recommended to a new design Please refer to our Web site about replacement information / clamp-filter_commercial_zcat_en.fm
3 (3/6) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 2 months. Be sure to follow the storage conditions (temperature: 5 to 40 C, humidity: 0 to 75% RH or less). Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). The case may crack when it is handled below freezing point or when it experiences a fall or other mechanical shock, as it is made of plastic; please exercise caution when handling the case. In a case where the product is attached to a cable larger than the product's internal diameter, the ferrite core may be damaged. Please confirm compatibility with the cable before use. Dropping or forcible engagement may cause damage to the product. Please handle the product with care when engaging. Do not detach and reuse a product that has been engaged. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. () Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (0) Electric heating apparatus, burning equipment () Disaster prevention/crime prevention equipment (2) Safety equipment (3) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment / clamp-filter_commercial_zcat_en.fm
4 (4/6) Clamp filters For cable Product compatible with RoHS directive Halogen-free Overview of the ZCAT series FEATURES Using TDK's unique structure where the ferrite core is mounted and integrated in a plastic case, it is possible to attach them to interface cables and power cables with one touch without having to cut the cables. Have excellent absorption of high-frequency noise using the high-frequency absorption characteristics of the ferrite core. Effective for common mode noise, so can be implemented as a noise countermeasure without influencing signal quality. Series are according to the outer diameter of the cable in order to be compatible with various cable sizes. APPLICATION PCs, word processors, monitors, HDDs, digital telephones, audio equipment, electronic musical instruments, video games, copiers, and facsimiles PART NUMBER CONSTRUCTION ZCAT A BK Series name Outer diameter dimensions Length dimensions Inner diameter dimensions (mm) (mm) (mm) Core material code A B D DT Non code Fixing type code Fixed cable type (cable is affixed to the main body) Chassis fixed type Flat cable type Flat cable type (double-sided tape fixed type) Band fixed type (cable is affixed to the body by a nylon band) Outer color code BK Black Non code Gray OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Operating Package quantity Individual weight Type Part No. temperature range C (pieces/box) g ZCAT (-BK) ZCAT (-BK) 640 ZCAT ZCAT (-BK) 40 to ZCAT (-BK) ZCAT (-BK) ZCAT A (-BK),344 6 ZCAT A (-BK) ZCAT-A ZCAT A (-BK) 40 to ZCAT A (-BK) ZCAT A (-BK) ZCAT-B ZCAT B (-BK) 40 to ZCAT D (-BK) ZCAT-D ZCAT D (-BK) 40 to ZCAT D (-BK) ZCAT DT (-BK) ZCAT-DT ZCAT DT (-BK) 40 to ZCAT DT (-BK) ZCAT0D (-BK) ZCAT**D ZCAT3D (-BK) 40 to ZCAT20D (-BK) Background yellow: The product which is not recommended to a new design. RoHS Directive Compliant Product: See the following for more details. Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 500ppm / clamp-filter_commercial_zcat_en.fm
5 (5/6) ZCAT series ZCAT type SHAPE & DIMENSIONS A B D C Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT (-BK) 22± 8± 7± 5± 7max. ZCAT (-BK) 2± 7± 9± 20± 9max. ZCAT (-BK) 36± 32± 9± 9.5± 9max. ZCAT232-30(-BK) 36± 32± ± 20.5± max. ZCAT (-BK) 39± 34± 3± 30± 3max. A fixing band is included when shipped. INTERNAL CONSTRUCTION STRUCTURE OF THE FIXING BAND Ferrite core Plastic case 2.4 to 2.6mm 02 to 06mm Material: 66-nylon(natural color) / clamp-filter_commercial_zcat_en.fm
6 (6/6) ZCAT series ZCAT type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] Part No ZCAT (-BK) ZCAT (-BK) ZCAT (-BK) ZCAT232-30(-BK) ZCAT (-BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT ZCAT ZCAT ZCAT ZCAT / clamp-filter_commercial_zcat_en.fm
7 (7/6) ZCAT series ZCAT-A type SHAPE & DIMENSIONS A B E C D Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT A(-BK) 25± 20± 5± 2.8±.2± 3 to 5(USB) ZCAT A(-BK) 30± 23± 7± 6.5± 5± 4 to 7(USB/IEEE394) ZCAT A(-BK) 35± 28± 9± 9.5± 7.4± 6 to 9 ZCAT A(-BK) 35± 28± 0± 2.5± 20± 8 to 0 ZCAT A(-BK) 36± 29± 3± 23.5± 22± 0 to 3 INTERNAL CONSTRUCTION Ferrite core Plastic case / clamp-filter_commercial_zcat_en.fm
8 (8/6) ZCAT series ZCAT-A type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] Part No ZCAT A(-BK) ZCAT A(-BK) ZCAT A(-BK) ZCAT A(-BK) ZCAT A(-BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT A ZCAT A ZCAT A ZCAT A 000 ZCAT A / clamp-filter_commercial_zcat_en.fm
9 (9/6) ZCAT series ZCAT-B type SHAPE & DIMENSIONS B A E D C Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT B(-BK) 2± 7± 9± 20± (29) 9max. Chassis fixed type attachment hole: ø4.8 to 4.9mm, Plate thickness: 0.5 to 2mm INTERNAL CONSTRUCTION Ferrite core Plastic case / clamp-filter_commercial_zcat_en.fm
10 (0/6) ZCAT series ZCAT-B type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. Part No. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] ZCAT B(-BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT B / clamp-filter_commercial_zcat_en.fm
11 (/6) ZCAT series ZCAT-D type SHAPE & DIMENSIONS A D B C Applicable cable thickness:.3mm max. Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT D(-BK) 33.5± 7.5± 26±.5± For 20 wires flat cable ZCAT D(-BK) 45.5± 24.5± 34± 2± For 26 wires flat cable ZCAT D(-BK) 67.5± 8.5± 52± 6± For 40 wires flat cable INTERNAL CONSTRUCTION Ferrite core Plastic case / clamp-filter_commercial_zcat_en.fm
12 (2/6) ZCAT series ZCAT-D type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] Part No. 30 ZCAT D(-BK) 35 ZCAT D(-BK) 35 ZCAT D(-BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT D ZCAT D ZCAT D / clamp-filter_commercial_zcat_en.fm
13 (3/6) ZCAT series ZCAT-DT type SHAPE & DIMENSIONS A B D C Applicable cable thickness:.3mm max. Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT DT(-BK) 33.5± 7.5± 26± 2.5± For 20 wires flat cable ZCAT DT(-BK) 45.5± 24.5± 34± 3± For 26 wires flat cable ZCAT DT(-BK) 67.5± 8.5± 52± 7± For 40 wires flat cable Double-sided tape fixed type (tape included when shipped). Background yellow: The product which is not recommended to a new design. INTERNAL CONSTRUCTION Ferrite core Plastic case / clamp-filter_commercial_zcat_en.fm
14 (4/6) ZCAT series ZCAT-DT type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] Part No. 30 ZCAT DT(-BK) 35 ZCAT DT(-BK) 35 ZCAT DT(-BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable Background yellow: The product which is not recommended to a new design. IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT DT ZCAT DT ZCAT DT / clamp-filter_commercial_zcat_en.fm
15 (5/6) ZCAT series ZCAT0D, 3D, 20 type SHAPE & DIMENSIONS A C D B E Dimemsions in mm Part No. A B C D E Applicable cable outer diameter ZCAT 0D-(BK) 27± 4.5± 0± 4± 7± 4max. ZCAT 3D-(BK) 34± 20± 3± 5± 8.5± 5max. ZCAT 20D-(BK) 35± 30± 20± 5± 5± 5max. INTERNAL CONSTRUCTION Ferrite core Plastic case / clamp-filter_commercial_zcat_en.fm
16 (6/6) ZCAT series ZCAT0D, 3D, 20 type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Impedance( )min. [0 to 00MHz] [00 to 500MHz] [50 to 500MHz] Part No ZCAT 0D-(BK) ZCAT 3D-(BK) ZCAT 20D-(BK) Test conditions: When passing through an impedance meter (unloaded) ømm copper cable IMPEDANCE VS. FREQUENCY CHARACTERISTICS ZCAT0D ZCAT3D ZCAT20D / clamp-filter_commercial_zcat_en.fm
September Clamp filters (Ferrite core with case) For automobile ECU. ZCAT-V series ZCAT-V-BK. Caution
E M C C o m p o n e n t s September 2017 Clamp filters (Ferrite core with case) For automobile ECU ZCAT-V series ZCAT-V-BK Caution (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationApril Common mode filters. For power line. ACP series. ACP3225 type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s April 2018 Common mode filters For power line ACP series ACP3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationMay Common Mode Filters. For power line. ACM Series. ACM1211 Type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s May 2016 Common Mode Filters For power line ACM Series ACM1211 [4844 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationNovember Common Mode Filters. For automotive power line. ACM-V series ACM4520V ACM70V ACM90V ACM12V
E M C C o m p o n e n t s November 0 Common Mode Filters For automotive power line ACM-V series ACM50V ACM70V ACM90V ACMV (/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
More informationJuly Common Mode Filters. For power line. ACM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 0 Common Mode Filters For power line ACM series ACM50 ACM7060 ACM9070 ACM ACM5 [808 inch]* [8 inch] [68 inch] [8 inch] [605 inch] * Dimensions Code JIS[EIA] (/5) REMINDERS
More informationNovember Common Mode Filters. For automobile signal line. ACM series. [0805 inch]* MOST. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s November 2013 Common Mode Filters For automobile signal line ACM series ACM2012 [0805 inch]* MOST * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using
More informationJuly Chip beads. For general signal line. HF-ACB series. HFxxACB4532. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 2016 Chip beads For general signal line HF-ACB series HFxxACB4532 Type HFxxACB4532 [1812 inch]* * Dimensions code JIS[EIA] (2/8) Reminders for using these products Before
More informationDecember Common Mode Filters. For automobile signal line. ZJYS81 Series. ZJYS81R5 Type. Caution. Nov.4, Sep.29, 2017
E M C C o m p o n e n t s December 2015 Common Mode Filters For automobile signal line ZJYS81 Series Caution Nov.4, 2015 Sep.29, 2017 Mar.30, 2018 (2/7) REMINDERS FOR USING THESE PRODUCTS Before using
More informationApril Inductors for power circuits. Multilayer ferrite. MLP series. MLP2520 type [1008 inch]* * Dimensions Code JIS[EIA] Caution
I N D U C T O R S April 2018 Inductors for power circuits Multilayer ferrite MLP series MLP2520 type MLP2520 2520 [1008 inch]* * Dimensions Code JIS[EIA] Caution (2/20) Products in this catalog are in
More informationFebruary Chip Beads. For general signal line. HF-ACB Series. HFxxACB3225. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 2015 Chip Beads For general signal line HF-ACB Series HFxxACB3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationJuly terminal filters. For power line. ACH series. ACH32C type. * Dimensions Code JIS[EIA] Caution
E M C C o m p o n e n t s July 2017 3-terminal filters For power line ACH series ACH32C [1206 inch]* * Dimensions Code JIS[EIA] Caution (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationJuly Inductors for Power Circuits. Multilayer Ferrite. MLP Series. MLP1608 Type [0603 inch]* * Dimensions Code JIS[EIA]
July 2016 Inductors for Power Circuits Multilayer Ferrite MLP Series MLP1608 Type MLP1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/13) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationJuly Common Mode Filters. For signal line. ZJYS51 series
E M C C o m p o n e n t s July 2013 Common Mode Filters For signal line ZJYS51 series (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJanuary Inductors for Power Circuits. Multilayer Ferrite. MLP Series. MLP1005 Type [0402 inch]* * Dimensions Code JIS[EIA]
January 2015 Inductors for Power Circuits Multilayer Ferrite MLP Series MLP1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure
More informationMMZ1005-V type. Chip beads. MMZ-V series. For general signal line High GHz noise countermeasure (high-speed signal line) May 2018
E M C C o m p o n e n t s May 218 Chip beads For general signal line High GHz noise countermeasure (high-speed signal line) MMZ-V series MMZ15-V 15[42 inch]* * Dimensions code JIS[EIA] (2/9) REMINDERS
More informationACM2012H-T05. Common Mode Filters. ACM-H Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2017 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) ACM-H Series ACM2012H-T05 [0805 inch]* * Dimensions Code JIS[EIA]
More informationSeptember Chip beads. For power line. MPZ series. MPZ0402 type. 0402[01005 inch]* * Dimensions code: JIS[EIA]
E M C C o m p o n e n t s September 2017 Chip beads For power line MPZ series MPZ0402 0402[01005 inch]* * Dimensions code: JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationJuly Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM0806G TCM608G [0202 inch]* [0302 inch] [0603 inch] * Dimensions
More informationJuly Chip beads. For power line. MPZ series (for automobiles) MPZ1005 Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 26 Chip beads For power line MPZ series (for automobiles) MPZ5 Type MPZ5 5[42 inch]* * Dimensions code JIS[EIA] (2/) Reminders for using these products Before using these
More informationApril Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s April 2014 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM1608G [0202 inch]* [0603 inch] * Dimensions Code JIS[EIA]
More informationFebruary Inductors for power circuits. Wound metal. SPM series. SPM5030 type SPM5030
I N D U C T O R S February 2018 Inductors for power circuits Wound metal SPM series SPM5030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationMay Inductors for Power Circuits. Wound Metal. SPM Series. SPM6530 Type SPM6530
I N D U C T O R S May 2017 Inductors for Power Circuits Wound Metal SPM Series SPM6530 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJanuary Noise suppression filter. For LED lights (Radiated noise suppression) MAF series. MAF2520A type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s January 2018 Noise suppression filter For LED lights (Radiated noise suppression) MAF series MAF2520A 2520 [1008 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE
More informationNovember Noise suppression filter for audio lines. For cellular bands. MAF Series. MAF1608G Type. * Dimensions Code
E M C C o m p o n e n t s November 2016 Noise suppression filter for audio lines For cellular bands MAF Series MAF1608G 1608[0603 inch]* * Dimensions Code (2/8) REMINDERS FOR USING THESE PRODUCTS Before
More informationAugust Inductors for power circuits. Wound metal. SPM-LR series. SPM5015-LR type SPM5015-LR
I N D U C T O R S August 2017 Inductors for power circuits Wound metal SPM-LR series SPM5015-LR (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJuly Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line, general signal line ACM series ACM202 ACM2520 [0805 inch]* [008 inch] * Dimensions Code JIS[EIA] (2/) REMINDERS
More informationFebruary Common Mode Filters. For automobile signal line. ACT Series. ACT45L Type. [1812 inch]* (Ethernet) * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 2016 Common Mode Filters For automobile signal line ACT Series ACT45L [1812 inch]* (Ethernet) * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before
More informationJuly Chip beads. For power line GHz noise countermeasure. MPZ-E series (for automobiles) MPZ1005-E Type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s July 216 Chip beads For power line GHz noise countermeasure MPZ-E series (for automobiles) MPZ15-E Type MPZ-E15-E 15[42 inch]* * Dimensions code JIS[EIA] (2/1) Reminders for using
More informationTCM0403S Type. Common Mode Filters. TCM-S Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2016 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) TCM-S Series TCM0403S [0201 inch]* * Dimensions Code JIS[EIA]
More informationATB series. Balun Transformers. Wound SMD
R F C o m p o n e n t s March 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) ATB-00CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationSeptember Chip Beads. For signal line. MMZ-V series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 213 Chip Beads For signal line MMZ-V series MMZ15-V 15[42 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationApril Common mode filters. Automotive power line (for power train/safety) ACM-V series. ACM12V type ACM12V
E M C C o m p o n e n t s April 2018 Common mode filters Automotive power line (for power train/safety) ACM-V series ACM12V (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure
More informationMay Inductors for Decoupling Circuits. Multilayer Ferrite. MLZ Series. MLZ1005 Type [0402 inch]* * Dimensions Code JIS[EIA]
I N D U C T O R S May 2017 Inductors for Decoupling Circuits Multilayer Ferrite MLZ Series MLZ1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationOctober Common Mode Filters. For automobile signal line. ACT series. ACT1210 type. [1210 inch]* (CAN-BUS, FlexRay) * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s October 2017 Common Mode Filters For automobile signal line ACT series ACT1210 [1210 inch]* (CAN-BUS, FlexRay) * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS
More informationSeptember terminal Filters. For high-speed signal line. MEM-D series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 2013 3-terminal Filters For high-speed signal line MEM-D series MEM1608D 1608[0603 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before
More informationMEA2010PE Type. 3-terminal Filters, SMD Array. MEA-PE Series. For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible)
E M C C o m p o n e n t s September 2015 3-terminal Filters, SMD Array For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-PE Series MEA2010PE 2010[0804 inch]* * Dimensions
More informationNovember Inductors for power circuits. Wound metal. SPM series. SPM10040 type SPM10040
I N D U C T O R S November 2017 Inductors for power circuits Wound metal SPM series SPM10040 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for Decoupling Circuits. Wound Ferrite. NLFV-EF Series. NLFV32-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Decoupling Circuits Wound Ferrite NLFV-EF Series NLFV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using
More informationJune Inductors for Power Circuits. Wound Ferrite. VLF-M Series. VLF302512MT Type VLF302512MT. Caution. May 18, Mar.
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite VLF-M Series VLF302512MT Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationSeptember terminal Filters. For signal line. MEM Series. MEM1608P Type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 2015 3-terminal Filters For signal line MEM Series MEM1608P 1608[0603 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationAugust June Noise suppression filter. For audio lines (Cellular band suppression) MAF series. MAF1005G type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s August June 218 Noise suppression filter For audio lines (Cellular band suppression) MAF series MAF15G type MAF15G 15 [42 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR
More informationJuly Inductors for power circuits. Wound metal. SPM series. SPM10040XTType SPM10040XT
I N D U C T O R S July 2017 Inductors for power circuits Wound metal SPM series SPM10040XTType SPM10040XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationE M C C o m p o n e n t s MCZ-CH Series MCZ1210CH [0504 inch]*
E M C C o m p o n e n t s December 2015 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH Series MCZ1210CH [0504 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR
More informationApril Inductors for Standard Circuits. Wound Ferrite. NLV-EF Series. NLV25-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Standard Circuits Wound Ferrite NLV-EF Series NLV25-EF 2520 [1008 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationVLF403212MT-CA Type. Inductors for Power Circuits. Caution. VLF-M-CA Series (For automobiles) Wound Ferrite VLF403212MT-CA. June 2017.
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite VLF-M-CA Series (For automobiles) VLF403212MT-CA Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE
More informationJune Inductors for power circuits. Wound ferrite. VLS-E series. VLS4012E type VLS4012E. Caution
I N D U C T O R S June 2017 Inductors for power circuits Wound ferrite VLS-E series VLS4012E Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationOctober Inductors for power circuits. Wound ferrite. VLS-E-CA series. VLS252010E-CA type VLS252010E-CA. Caution
I N D U C T O R S October 2017 Inductors for power circuits Wound ferrite VLS-E-CA series VLS252010E-CA Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationJuly Balun Transformers. Wound SMD. ATB series. ATB CT ( mm) ATB CT ( mm) ATB CT (
R F C o m p o n e n t s July 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
More informationApril Inductors for Standard Circuits. Wound Ferrite. NLV-EF Series. NLV32-EF Type. * Dimensions Code JIS[EIA]
I N D U C T O R S April 2017 Inductors for Standard Circuits Wound Ferrite NLV-EF Series NLV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationMEA-PE series. 3-terminal Filters, SMD Array. For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) October 2013
E M C C o m p o n e n t s October 2013 3-terminal Filters, SMD Array For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-PE series MEA1210PE MEA1608PE MEA2010PE 1210[0504
More informationOctober Inductors for power circuits. Wound ferrite. VLS-E-CA series (For automobiles) VLS3012E-CA type VLS3012E-CA. Caution
I N D U C T O R S October 2017 Inductors for power circuits Wound ferrite VLS-E-CA series (For automobiles) VLS3012E-CA Caution (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationMarch Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM3012 Type SPM3012
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM3012 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for power circuits. Wound ferrite. VLCF series. VLCF type VLCF4018-2
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite VLCF series VLCF4018-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJanuary Pulse transformers. For LAN interface (10/100/1000BASE-T) ALT series. * Dimensions Code JIS[EIA]
January 2018 Pulse transformers For LAN interface (10/100/1000BASE-T) ALT series ALT3232M ALT4532M 3232 [1210 inch]* 4532 [1812 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS
More informationSeptember Inductors for Decoupling Circuits. Wound Ferrite. NLCV-EF Series. NLCV32-EF Type. * Dimensions Code JIS[EIA]
September 2016 Inductors for Decoupling Circuits Wound Ferrite NLCV-EF Series NLCV32-EF 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationMarch Inductors for Power Circuits. Wound Metallic Magnetic Material. SPM Series. SPM4015 Type SPM4015
March 2015 Inductors for Power Circuits Wound Metallic Magnetic Material SPM Series SPM4015 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationAugust Inductors for power circuits. Wound ferrite. VLS-CX-1 series. VLS252010CX-1 type VLS252010CX-1
I N D U C T O R S August 2017 Inductors for power circuits Wound ferrite VLS-CX-1 series VLS252010CX-1 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationOctober Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s October 2014 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series MCZ1210CH MCZ2010CH [0504 inch]* [0804 inch] * Dimensions Code JIS[EIA]
More informationFebruary Inductors for Power Circuits. Wound Ferrite. VLF-M Series. VLF252015MT Type VLF252015MT
February 2016 Inductors for Power Circuits Wound Ferrite VLF-M Series VLF252015MT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationMEA1608LE Type. 3-terminal Filters, SMD Array. MEA-LE Series
E M C C o m p o n e n t s September 2015 3-terminal Filters, SMD Array For differential signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-LE Series MEA1608LE 1608[0603 inch]*
More informationDecember Inductors for decoupling circuits. Wound ferrite. NLCV-EFRD Series (for automotive) NLCV32-EFRD. * Dimensions Code JIS[EIA]
I N D U C T O R S December 2017 Inductors for decoupling circuits Wound ferrite NLCV-EFRD Series (for automotive) NLCV32-EFRD 3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE
More informationMay Inductors for Power Circuits. Wound Metal. SPM Series. SPM12565XTType SPM12565XT
May 2016 Inductors for Power Circuits Wound Metal SPM Series SPM12565XTType SPM12565XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationAugust Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s August 2016 Multilayer Band Pass Filter For 2412-2484MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2412-2484MHz Conformity to RoHS Directive
More informationMLZ1608 type. Inductors for decoupling circuits. MLZ series (for automotive) Multilayer ferrite [0603 inch]* December 2017
I N D U C T O R S December 2017 Inductors for decoupling circuits Multilayer ferrite MLZ series (for automotive) MLZ1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS
More informationDecember Inductors for decoupling circuits. ADL-VT series (for automotive) ADL3225VT type. * Dimensions code
I N D U C T O R S December 2017 Inductors for decoupling circuits ADL-VT series (for automotive) ADL3225VT 3225 [1210 inch]* * Dimensions code (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these
More informationApril Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF Type VLCF5024-2
April 2016 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5024-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationVLS-HBX-1 series. Inductors for Power Circuits. Winding metal magnetic material VLS201610HBX-1 VLS201612HBX-1 VLS252010HBX-1 VLS252012HBX-1
September 2014 Inductors for Power Circuits Winding metal magnetic material VLS-HBX-1 series VLS201610HBX-1 VLS201612HBX-1 VLS252010HBX-1 VLS252012HBX-1 (2/21) REMINDERS FOR USING THESE PRODUCTS Before
More informationDecember Inductors for power circuits. Wound ferrite. VLS-EX-CA series (for automotive) VLS6045EX type VLS6045EX
I N D U C T O R S December 2017 Inductors for power circuits Wound ferrite VLS-EX-CA series (for automotive) VLS6045EX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationFebruary Inductors for Power Circuits. Winding metal magnetic material. VLS-HBX series VLS201610HBX VLS252010HBX
February 2014 Inductors for Power Circuits Winding metal magnetic material VLS-HBX series VLS201610HBX VLS252010HBX (2/13) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationIFM series Hybrid type (magnetic layer+copper layer)
M A G N E T I C S H E E T June 2017 Noise suppression sheets Flexield (2/5) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS
More informationApril Inductors for Power Circuits. Wound Ferrite. VLS-CX Series. VLS201610CX Type VLS201610CX
April 2016 Inductors for Power Circuits Wound Ferrite VLS-CX Series VLS201610CX (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationApril Inductors for Power Circuits. Wound Ferrite. VLS-E Series. VLS252008E Type VLS252008E
April 2016 Inductors for Power Circuits Wound Ferrite VLS-E Series VLS252008E (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
More informationVLF-Mseries. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLF-Mseries VLF252010MT VLF252012MT VLF252015MT VLF302510MT VLF302512MT VLF302515MT VLF403210MT VLF403212MT VLF403215MT VLF504010MT VLF504012MT VLF504015MT
More informationVLCFseries. Inductors for Power Circuits. Wound Ferrite VLCF VLCF4020 VLCF VLCF VLCF5020 VLCF VLCF VLCF VLCF5028-2
May 2013 Inductors for Power Circuits Wound Ferrite VLCFseries VLCF4018-2 VLCF4020 VLCF4024-2 VLCF4028-2 VLCF5020 VLCF5020-1 VLCF5020-3 VLCF5024-2 VLCF5028-2 (1/40) REMINDERS FOR USING THESE PRODUCTS Before
More informationJune Inductors for Power Circuits. Wound Ferrite. CLFseries CLF7045 CLF10040
June 2013 Inductors for Power Circuits Wound Ferrite CLFseries CLF7045 CLF10040 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationJanuary Pulse transformers. For LAN interface (PoE(600mA)[1000BASE-T], Non-PoE [2.5GBASE-T/5GBASE-T]) ALT series. * Dimensions Code JIS[EIA]
January 2018 Pulse transformers For LAN interface (PoE(600mA)[1000BASE-T], Non-PoE [2.5GBASE-T/5GBASE-T]) ALT series ALT4532P 4532 [1812 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE
More informationMarch Inductors for Decoupling Circuits. Multilayer Ferrite. MLZ Series. MLZ2012 Type [0805 inch]* * Dimensions Code JIS[EIA]
March 205 Inductors for Decoupling Circuits Multilayer Ferrite MLZ Series MLZ202 202 [0805 inch]* * Dimensions Code JIS[EIA] (2/5) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure
More informationFebruary Inductors for Standard Circuits. Multilayer Ferrite. MLF Series. MLF1608 Type [0603 inch]* * Dimensions Code JIS[EIA]
I N D U C T O R S February 2017 Inductors for Standard Circuits Multilayer Ferrite MLF Series MLF1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/11) REMINDERS FOR USING THESE PRODUCTS Before using
More informationJune Inductors for Power Circuits. Wound Ferrite. CLF Series. CLF6045 Type CLF6045. Caution. May 18, Mar. 29, 2019
I N D U C T O R S June 2017 Inductors for Power Circuits Wound Ferrite CLF Series CLF6045 Caution May 18, 2017 Mar. 29, 2019 Sep. 30, 2019 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationMay Inductors for Power Circuits. Wound Ferrite. VLMseries VLM VLM
May 2013 Inductors for Power Circuits Wound Ferrite VLMseries VLM10555-2 VLM10555-3 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationMLF2012 Type. Inductors for Standard Circuits. MLF Series (For automobiles) Multilayer Ferrite [0805 inch]* February 2017
I N D U C T O R S February 2017 Inductors for Standard Circuits Multilayer Ferrite MLF Series (For automobiles) MLF2012 2012 [0805 inch]* * Dimensions Code JIS[EIA] (2/11) REMINDERS FOR USING THESE PRODUCTS
More informationCKD series MULTILAYER CERAMIC CHIP CAPACITORS. Commercial grade 3-terminal feedthrough type CAPACITORS
September 208 MULTILAYER CERAMIC CHIP Commercial grade 3-terminal feedthrough type CKD series Type: CKD7JB 05 [0402 inch]* CKD6JB 608 [0603 inch]* CKD6BJB 608 [0603 inch]* * Dimensions code (2/6) REMINDERS
More informationNL Type. Inductors for Standard Circuits. Caution. NL Series. Wound Ferrite. December May.21, Dec.22, 2016
December 2015 Inductors for Standard Circuits Wound Ferrite NL Series NL565050 5650 [2220 inch]* * Dimensions Code JIS[EIA] Caution May.21, 2015 Dec.22, 2016 Jan.30, 2017 (2/9) REMINDERS FOR USING THESE
More informationJuly Inductors for power circuits. Wound ferrite. RLF series. RLF7030 type RLF7030
I N D U C T O R S July 2017 Inductors for power circuits Wound ferrite RLF series RLF7030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationApril Inductors for power circuits. Wound ferrite. SLF series. SLF7032 type SLF7032
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF7032 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationDecember Inductors for decoupling circuits. Soft termination. KLZ-HR series (for automotive) KLZ2012-HR type. * Dimensions code JIS[EIA]
I N D U C T O R S December 207 Inductors for decoupling circuits Soft termination KLZ-HR series (for automotive) KLZ202-HR 202 [0805 inch]* * Dimensions code JIS[EIA] (2/3) REMINDERS FOR USING THESE PRODUCTS
More informationMay Inductors for Power Circuits. Wound Ferrite. VLPseries VLP6045L VLP8040
May 2013 Inductors for Power Circuits Wound Ferrite VLPseries VLP6045L VLP8040 (1/12) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationJuly Inductors for Decoupling Circuits. Wound Ferrite. NLC series. * Dimensions Code JIS[EIA]
July 2013 Inductors for Decoupling Circuits Wound Ferrite NLC series NLC453232 NLC565050 4532 [1812 inch]* 5650 [2220 inch] * Dimensions Code JIS[EIA] (2/15) REMINDERS FOR USING THESE PRODUCTS Before using
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
December 2013 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 (3.2x3.0 mm) SPM4012 (4.4x4.1 mm) SPM5012 (5.4x5.1 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) (2/25) REMINDERS
More informationOctober Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s October 2017 Multilayer Band Pass Filter For 4920 5950MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4920 5950MHz Conformity to RoHS Directive
More informationJanuary Inductors for power circuits. Wound metal. SPM-HZ series (for automotive) SPM6530-HZ type SPM6530-HZ
I N D U C T O R S January 2018 Inductors for power circuits Wound metal SPM-HZ series (for automotive) SPM6530-HZ (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More informationMarch Thin-Film Directional Coupler. For MHz / MHz TFSC A1X. 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s March 17 Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz 0.65x0.5mm [EIA 02]* * Dimensions Code JIS[EIA] Thin-Film Directional Coupler For 2400-2500MHz / 4900-5850MHz
More informationMay Inductors for Decoupling Circuits. Multilayer Ferrite. MLZseries [0402 inch]* * Dimensions Code JIS[EIA]
May 203 Inductors for Decoupling Circuits Multilayer Ferrite MLZseries MLZ05 MLZ608 MLZ202 05 [0402 inch]* 608 [0603 inch] 202 [0805 inch] * Dimensions Code JIS[EIA] (/24) REMINDERS FOR USING THESE PRODUCTS
More informationApril Inductors for power circuits. Wound ferrite. SLF series. SLF12575 type SLF12575
I N D U C T O R S April 2018 Inductors for power circuits Wound ferrite SLF series SLF12575 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
More informationJanuary Inductors for Power Circuits. Wound Ferrite. CLF Series. CLF12555 Type CLF12555
January 2016 Inductors for Power Circuits Wound Ferrite CLF Series CLF12555 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationJune Multilayer Low Pass Filter. For MHz DEA161990LT-1182A8
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 1710-1990MHz Multilayer Low Pass Filter For 1710-1990MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS [Top view] 1.60±0.15 (2) 0.80±0.10
More informationIFF series (Heat-resistant)
M A G N E T I C S H E E T April 2018 Noise suppression sheets Flexield IFF series (Heat-resistant) (2/5) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
More informationMay Chip beads. For power line. MPZ series (for automotive) MPZ2012 type. * Dimensions code JIS[EIA]
E M C C o m p o n e n t s May 218 Chip beads For power line MP series (for automotive) MP212 212[85 inch]* * Dimensions code JIS[EIA] (2/1) EMINDES FO USING THESE PODUCTS Before using these products, be
More informationJanuary Inductors for power circuits. Wound ferrite. CLF-NI-D series (for automotive) CLF7045NI-D type CLF7045NI-D
I N D U C T O R S January 2018 Inductors for power circuits Wound ferrite CLF-NI-D series (for automotive) CLF7045NI-D (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
More information