CMOS LOW VOLTAGE, LOW CHARGE INJECTION QUAD SPST ANALOG SWITCHES
|
|
|
- Thomasina Carpenter
- 6 years ago
- Views:
Transcription
1 ADVANCED LINEAR DEVICES, INC. ALD421/ALD422M CMOS LOW VOLTAGE, LOW CHARGE INJECTION QUAD SPST ANALOG SWITCHES GENERAL DESCRIPTION The ALD421/ALD422M are quad SPST CMOS analog switches specifically developed for 3 to 12 volt applications where low charge injection and low leakage currents are important analog switch operating characteristics. The main features are precision matching, charge compensation circuitry, fast switching, low on-resistance and micropower consumption. The ALD421 operates in break-before-make switching whereas the ALD422M operates in make-before-break switching. The ALD421/ALD422M are designed for precision applications such as charge amplifiers, sample and hold amplifiers, data converter switches, and programmable gain amplifiers. These switches are also excellent for general purpose switching applications for micropower battery operated systems. APPLICATIONS INFORMATION The ALD421/ALD422M are designed to operate with standard single or dual power supplies of +3V to 1V or ±1.5V to ±5V. Functionality extends down to +2V or ±1V power supply, making it suitable for lithium battery or rechargeable battery operated systems where power efficiency and performance are important design parameters. These switches feature na quiescent current and interface directly to CMOS logic levels from microprocessor or logic interface circuits. Built- in level shifters at the input stage provide for dual supply analog signal switching. On the board level, low charge injection and fast operation can be obtained by using short leads, minimizing input and output capacitances, and by adequate bypass capacitors placed on the board at the supply nodes. For more information, see Application Note AN42. The ALD421/422M are manufactured with Advanced Linear Devices' enhanced ACMOS silicon gate CMOS process, and are also part of the linear elements in Advanced Linear Devices' "Function-Specific" ASIC. ORDERING INFORMATION Operating Temperature Range -55 C to +125 C C to +7 C C to +7 C 16-Pin 16-Pin 16-Pin CERDIP Plastic Dip SOIC Package Package Package ALD421 DC ALD421 PC ALD421 SC ALD422M DC ALD422M PC ALD422M SC LOGIC TABLE Input Logic Switch State ALD421 ALD422M On Off 1 Off On * Contact factory for industrial temperature range. FEATURES 3V, 5V & 1V supply operation ±1.5V, ±2.5V & ±5V supply operation.1µw power dissipation 1pC charge injection Rail-to-rail signal range Low on-resistance pa leakage current 421 break-before-make switching 422M make-before-break switching Built-in dual supply level translator BENEFITS Fast effective signal throughput Low switching transients Low signal loss Essentially no DC power consumption Full analog signal range over power supply rail Flexible power supply range for battery operated systems APPLICATIONS Low level signal conditioning circuits Portable battery operated instruments Computer peripherals PCMCIA Fast sample and hold Analog signal multiplexer Programmable gain amplifiers Switched capacitor circuits Micropower based systems Video/audio switches Feedback control systems PIN CONFIGURATION / BLOCK DIAGRAM IN 1 D 1 S 1 V - S 4 D DC, PC, SC PACKAGE S 2 V + IN IN IN 2 D 2 NC S 3 D Advanced Linear Devices, Inc. 415 Tasman Drive, Sunnyvale, California Tel: (48) Fax: (48)
2 ABSOLUTE MAXIMUM RATINGS Supply voltage, V+ referenced to V- -.3V to +13.2V -.3V to +13.2V Terminal voltage range (any terminal) Note 1 (V- -.3)V to (V+ +.3)V Power dissipation 6 mw Operating temperature range PC, SC package C to +7 C DC package -55 C to +125 C Storage temperature range -65 C to +15 C Lead temperature, 1 seconds +26 C DC current (any terminal) 1mA POWER SUPPLY RANGE 421/422M (PC,SC) 421/422M (DC) Parameter Symbol Min Typ Max Min Typ Max Unit Supply V SUPPLY ±1.5 ±6. ±1.5 ±6. V Dual Supply Voltage V Single Supply DC ELECTRICAL CHARACTERISTICS T A = 25 C V+ = +5.V, V- = -5.V =.V unless otherwise specified 421/422M (PC,SC) 421/422M (DC) Parameter Symbol Min Typ Max Min Typ Max Unit Test Conditions Analog Signal Range V A V On - Resistance R ON Ω V A = V I A = 1mA C to +7 C C to +125 C Change of On-Resistance R ON % from -V S to +V S Change of On-Resistance R ON / T %/ C with Temperature R ON Match 2 2 % Between Switches Source Off I S(OFF) pa V S = +/-4.V, V D = -/+4.V Leakage Current 5 pa C to +7 C 4 pa -55 C to +125 C Drain Off I D(OFF) pa V D = +/-4.V, V S = -/+4.V Leakage Current 5 pa C to +7 C 4 pa -55 C to +125 C Channel On I D(ON) pa Leakage Current 5 pa C to +7 C 4 pa -55 C to +125 C Input High Voltage V IH Logic "1" Input Low Voltage V IL.8.8 V Logic "" Input High or I IH Input Low Current I IL 1 1 na ±1.5 V SUPPLY ±5.V Supply Current I SUPPLY µa ALD421/ALD422M Advanced Linear Devices 2
3 AC ELECTRICAL CHARACTERISTICS T A = 25 C V+ = +5.V, V- = -5.V, =.V unless otherwise specified 421/422M (PC) 421/422M (DC) 421/422M (SC) Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Unit Test Conditions Turn On t ON ns 421 (Note 2) Delay time ns 422M Turn Off t OFF ns 421 (Note 2) Delay time ns 422M Break-Before-Make t BD ns 421 (Note 3) Delay Time Make-Before-Break t MD ns 422M (Note 3) Delay Time Charge Injection Q INJ pc 421 (Note 3) (Note 4) pc 422M Off Isolation db At f = 1KHz, (Note 5) Crosstalk db At f = 1KHz, (Note 6) Total Harmonic T HD % 1K Distortion K Source/Drain C S(OFF) Off Capacitance C D(OFF) pf Channel On C DS(ON) pf Capacitance Pin to Pin C PP pf Capacitance DC ELECTRICAL CHARACTERISTICS T A = 25 C V+= +5.V, V- = =.V unless otherwise specified ALD421/422M (PC,SC) ALD421/422M (DC) Parameter Symbol Min Typ Max Min Typ Max Unit Test Conditions Analog Signal Range V A V On - Resistance R ON Ω V A = +2.5V I A = 1mA C to +7 C C to +125 C Change of On-Resistance R ON 2 2 % from -V S to +V S Change of On-Resistance R ON / T %/ C with Temperature R ON Match 2 2 % Between Switches Input High Voltage V IH V Input Low Voltage V IL.8.8 V Notes: 1. Voltage on any terminal must be less than (V+) +.3V and greater than (V-) -.3V, at all times including before power is applied and V+ = V- =.V. Vsupply power supply needs to be sequenced on first on power turn-on and sequenced off last during power turn-off. 2. See Switching Time Test Circuit. 3. Guaranteed by design. 4. See Charge Injection Test Circuit 5. See Off Isolation Test Circuit 6. See Crosstalk Test Circuit ALD421/ALD422M Advanced Linear Devices 3
4 DC ELECTRICAL CHARACTERISTICS T A = 25 C V+ = +3.V, V- = =.V unless otherwise specified 421/422M (PC,SC) 421/422M (DC) Parameter Symbol Min Typ Max Min Typ Max Unit Test Conditions Analog Signal Range V A V On - Resistance R ON Ω V A = 1.5V I A = 1mA C to +7 C C to +125 C Change of On-Resistance R ON % from -V S to +V S Change of On-Resistance R ON / T %/ C with Temperature R ON Match Between Switches 2 2 % Input High Voltage V IH V Input Low Voltage V IL.8.8 V TYPICAL PERFORMANCE CHARACTERISTICS 1. POWER DISSIPATION AS A FUNCTION OF FREQUENCY 24 ON RESISTANCE AS A FUNCTION OF SIGNAL VOLTAGE POWER DISSIPATION (mw) ON - RESISTANCE (Ω) V SUPPLY = 1V 125 C 85 C 25 C -25 C -55 C FREQUENCY (KHz) SIGNAL VOLTAGE (V) 5 ON RESISTANCE AS A FUNCTION OF SIGNAL VOLTAGE 85 ON RESISTANCE AS A FUNCTION OF SIGNAL VOLTAGE ON - RESISTANCE (Ω) C 2 85 C 25 C - 25 C - 55 C ON - RESISTANCE (Ω) 7 55 V SUPPLY = 3V 125 C 4 85 C C - 25 C - 55 C SIGNAL VOLTAGE (V) SIGNAL VOLTAGE (V) ALD421/ALD422M Advanced Linear Devices 4
5 TYPICAL PERFORMANCE CHARACTERISTICS 2. SUPPLY CURRENT AS A FUNCTION OF INPUT VOLTAGE 1 SUPPLY CURRENT AS A FUNCTION OF INPUT VOLTAGE SUPPLY CURRENT (ma) V SUPPLY = 1V SUPPLY CURRENT (µa) INPUT VOLTAGE (V) INPUT VOLTAGE (V) SUPPLY CURRENT (µa) SUPPLY CURRENT AS A FUNCTION OF INPUT VOLTAGE V SUPPLY = 3V TOTAL HARMONIC DISTORTION(%) TOTAL HARMONIC DISTORTION AS A FUNCTION OF FREQUENCY V S =.355 V RMS 1K 1K INPUT VOLTAGE (V) FREQUENCY (KHz) 5 SWITCH DELAY TIME AS A FUNCTION OF SUPPLY VOLTAGE 5 SWITCH DELAY TIME AS A FUNCTION OF SUPPLY VOLTAGE SWITCH DELAY TIME (ns) ALD421 TURN ON DELAY TIME TURN OFF DELAY TIME SWITCH DELAY TIME (ns) ALD422M TURN OFF DELAY TIME TURN ON DELAY TIME SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) ALD421/ALD422M Advanced Linear Devices 5
6 TEST CIRCUITS SWITCHING TIME TEST CIRCUIT CROSSTALK TEST CIRCUIT V S = 3V 1KHz 4.5V V RL = C L = 35pF Vi = 1Vrms 1KHz 5Ω S2 D2 C L = 15pF C L = 15pF t r = t f 2ns CCRR = 2 log [ /Vi ] 5% 5% 9% 1% TOTAL HARMONIC DISTORTION TEST CIRCUIT t on / t off toff / t on Vi = 1Vpp 1KHz 5Ω C L = 15pF CHARGE INJECTION TEST CIRCUIT OFF ISOLATION TEST CIRCUIT C L = 1pF 4.5V.5V 1KHz Vi = 1Vrms 1KHz 5Ω C L = 15pF Q = C L ALD421/ALD422M Advanced Linear Devices 6
High-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG27 High-Speed Quad Monolithic SPST CMOS Analog Features Benefits Applications Fast ing : ns Low Charge Injection: pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Description Fast Settling Times
High-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG High-Speed Quad Monolithic SPST CMOS Analog Switch Features Benefits Applications Fast Switching t ON : ns Low Charge Injection: 9 pc Low r DS(on) : 3 TTL Compatible Low Leakage: pa Fast Settling Times
Precision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
HI-201HS. High Speed Quad SPST CMOS Analog Switch
SEMICONDUCTOR HI-HS December 99 Features Fast Switching Times, N = ns, FF = ns Low ON Resistance of Ω Pin Compatible with Standard HI- Wide Analog Voltage Range (±V Supplies) of ±V Low Charge Injection
Monolithic Dual SPST CMOS Analog Switch
Monolithic Dual SPST CMOS Analog Switch DG00B DESCRIPTION The DG00B is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally
PART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
QUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER
ADVANCED LINEAR DEVICES, INC. ALD472A/ALD472B ALD472 QUAD 5V RAILTORAIL PRECISION OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The ALD472 is a quad monolithic precision CMOS railtorail operational amplifier
Maxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
Improved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,
Pin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
Low-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
Quad SPST JFET Analog Switch SW06
a FEATURES Two Normally Open and Two Normally Closed SPST Switches with Disable Switches Can Be Easily Configured as a Dual SPDT or a DPDT Highly Resistant to Static Discharge Destruction Higher Resistance
DUAL ULTRA MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER
ADVANCED LINEAR DEVICES, INC. ALD276A/ALD276B ALD276 DUAL ULTRA MICROPOWER RAILTORAIL CMOS OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The ALD276 is a dual monolithic CMOS micropower high slewrate operational
Quad SPST CMOS Analog Switches
9-3960; Rev 3; 6/06 Quad SPST CMOS Analog Switches General Description The are normally open, quad singlepole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with
High-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing Glitches High Precision High-Speed
HI-201HS. Features. High Speed, Quad SPST, CMOS Analog Switch. Applications. Ordering Information. Pinout (Switches Shown For Logic 1 Input) FN3123.
HI-HS Data Sheet September 4 FN.4 High Speed, Quad SPST, CMOS Analog Switch The HI-HS is a monolithic CMOS Analog Switch featuring very fast switching speeds and low ON resistance. The integrated circuit
DATASHEET HI-201HS. Features. Applications. Ordering Information. Pinout (Switches Shown For Logic 1 Input) High Speed, Quad SPST, CMOS Analog Switch
DATASHEET HI-21HS High Speed, Quad SPST, CMOS Analog Switch The HI-21HS is a monolithic CMOS Analog Switch featuring very fast switching speeds and low ON resistance. The integrated circuit consists of
10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
BCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
CMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.)
DGA_MIL/A_MIL/A_MIL/A_MIL CMOS Analog Switches (Obsolete for non-hermetic. Use DGB Series as pin-for-pin replacements.) -V Input Range Fast Switching t ON : ns Low r DS(on) : Single Supply Operation CMOS
LC 2 MOS Quad SPST Switches ADG441/ADG442/ADG444
LC 2 MOS Quad SPST Switches ADG441/ADG442/ADG444 FEATURES 44 V supply maximum ratings VSS to VDD analog signal range Low on resistance (
Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
MAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
PI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
NTE4016B & NTE4016BT Integrated Circuit CMOS, Quad Analog Switch/Quad Multiplexer
NTE4016B & NTE4016BT Integrated Circuit CMOS, Quad Analog Switch/Quad Multiplexer Description: The NTE4016B (14 Lead DIP) and NTE4016BT (SOIC 14) quad bilateral switches are constructed with MOS P channel
Quad Audio Switch REV. B BLOCK DIAGRAM OF ONE SWITCH CHANNEL
a FEATURES CIickless Bilateral Audio Switching Four SPST Switches in a -Pin Package Ultralow THD+N:.8% @ khz ( V rms, R L = k ) Low Charge Injection: 3 pc typ High OFF Isolation: db typ (R L = k @ khz)
PI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
MM74HC4051 MM74HC4052 MM74HC Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer
8-Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer General Description The MM74HC4051, MM74HC4052 and MM74HC4053 multiplexers are digitally controlled analog
ADG1411/ADG1412/ADG1413
.5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
MM74HC4066 Quad Analog Switch
MM74HC4066 Quad Analog Switch General Description The MM74HC4066 devices are digitally controlled analog switches utilizing advanced silicon-gate CMOS technology. These switches have low ON resistance
74VHC Channel Analog Multiplexer 74VHC4052 Dual 4-Channel Analog Multiplexer 74VHC4053 Triple 2-Channel Analog Multiplexer
74VHC4051 8-Channel Analog Multiplexer 74VHC4052 Dual 4-Channel Analog Multiplexer 74VHC4053 Triple 2-Channel Analog Multiplexer General Description Ordering Code: These multiplexers are digitally controlled
High-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog FEATURES BENEFITS APPLICATIONS Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 3 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing
Low-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
LC 2 MOS Precision 5 V Quad SPST Switches ADG661/ADG662/ADG663
a FEATURE +5 V, 5 V Power upplies Ultralow Power issipation (
50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
TOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223
Data Sheet Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223 FEATURES
PI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
High-Speed Quad Monolithic SPST CMOS Analog Switch
DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage
Quad SPDT Switch ADG333A
Quad SPT Switch AG333A FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (45 Ω max) Low RON (5 Ω max) Low RON match (4 Ω max) Low power dissipation Fast switching times
74VHC VHC VHC Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer
April 1994 Revised April 1999 74VHC4051 74VHC4052 74VHC4053 8-Channel Analog Multiplexer Dual 4-Channel Analog Multiplexer Triple 2-Channel Analog Multiplexer General Description These multiplexers are
Quad 2-Input NAND Gate High-Voltage Silicon-Gate CMOS
TECHNICAL DATA Quad 2-Input NAND Gate High-oltage Silicon-Gate CMOS The NAND gates provide the system designer with direct emplementation of the NAND function. Operating oltage Range:.0 to 18 Maximum input
0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
MAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
SGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
High-Speed, Low-Glitch D/CMOS Analog Switches
High-Speed, Low-Glitch /CMOS Analog Switches G/2/3 Fast Switching t ON : 2 ns Low Charge Injection: 2 pc Wide Bandwidth: MHz -V CMOS Logic Compatible Low r S(on) : 8 Low Quiescent Power :.2 nw Single Supply
LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453
LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
CD4016BC Quad Bilateral Switch
Quad Bilateral Switch General Description The CD4016BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4066BC.
Description. Features. Applications. Pin Assignment. Pin Description Pin No Pin Name. Logic Function Table Logic Inputs(S) PI5A4157
Low Voltage SPDT 0.8Ω Analog Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage
3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers
DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual
Dual SPDT Analog Switch
Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V
SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
High-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches
9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to
UM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
Dual SPDT Negative Rail Analog Switches with ±VCC Capability
19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature
5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
DG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
0.5 pc Charge Injection, 100 pa Leakage, Dual SPDT Analog Switch
0.5 pc Charge Injection, pa Leakage, Dual SPDT Analog Switch DESCRIPTION The is an analog CMOS, dual SPDT switch, designed to operate from a +2.7 V to +12 V single supply or from ± 2.7 V to ± 5 V, dual
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
Precision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
Dual SPDT Switch ADG436
ual SPT Switch AG436 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (12 Ω typ) Low RON (3 Ω max) Low RON match (2.5 Ω max) Low power dissipation Fast switching times
MM74HC132 Quad 2-Input NAND Schmitt Trigger
Quad 2-Input NAND Schmitt Trigger General Description The utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as well as the capability
S 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413
19-572; Rev ; 12/1 Quad SPST +7V Analog Switches General Description The are analog switches with a low on-resistance of 1I (max) that conduct equally well in both directions. All devices have a rail-to-rail
MP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
MAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
Precision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers
9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within
Single Supply, Low Power Triple Video Amplifier AD813
a FEATURES Low Cost Three Video Amplifiers in One Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = 15 ) Gain Flatness.1 db to 5 MHz.3% Differential Gain Error.6
PI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features
2345678923456789234567892234567892345678923456789223456789234567892345678922345678923456789234567892234567892 Features Single-Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Range Low On-Resistance
Obsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s) STG3684
LOW VOLTAGE 0.5Ω MAX DUAL SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 3.0V t PD = 0.4ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L
.5 Ω CMOS 1.65 V to 3.6 V ual SPT/2:1 MUX AG836L FEATURES.5 Ω typical on resistance.8 Ω maximum on resistance at 125 C 1.65 V to 3.6 V operation Automotive temperature range: 4 C to +125 C Guaranteed leakage
Functional Diagrams, Pin Configurations, and Truth Table
Ω Ω µ With +12V power supply, the PS4066/PS4066A guarantee
MAX4734 LOGIC NO1 GND. Maxim Integrated Products 1
9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has
PRECISION INTEGRATING ANALOG PROCESSOR
ADVANCED LINEAR DEVICES, INC. ALD500AU/ALD500A/ALD500 PRECISION INTEGRATING ANALOG PROCESSOR APPLICATIONS 4 1/2 digits to 5 1/2 digits plus sign measurements Precision analog signal processor Precision
ON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839
.35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55
MAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
Low-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859
1.3 Ω CMOS, 1.8 V to 5.5 ingle SPT Switch/2:1 MUX in SOT-66 Package AG859 FEATURES 1.8 V to 5.5 V single supply Tiny 1.65 mm 1.65 mm package Low on resistance: 1.3 Ω at 5 V supply High current-carrying
Precision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The DG4 series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. Combining
Analog Multiplexer Demultiplexer
Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS The SL74HC4051 utilize silicon-gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents.
MAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF
9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat
TOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
DG200, DG201. CMOS Dual/Quad SPST Analog Switches. Description. Features. Ordering Information. Applications. Pinouts.
SEMICONDUCTOR DG200, DG20 December 993 CMOS Dual/Quad SPST Analog Switches Features Switches Greater than 28V P-P Signals with ±5 Supplies Break-Before-Make Switching t OFF 250ns, t ON 700ns Typical TTL,
CD4016BC Quad Bilateral Switch
CD4016BC Quad Bilateral Switch General Description The CD4016BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with
1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436
Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
MAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
Four-Channel Sample-and-Hold Amplifier AD684
a FEATURES Four Matched Sample-and-Hold Amplifiers Independent Inputs, Outputs and Control Pins 500 ns Hold Mode Settling 1 s Maximum Acquisition Time to 0.01% Low Droop Rate: 0.01 V/ s Internal Hold Capacitors
Multiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
The UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw