OPTOTRONIC Intelligent

Transcription

1 OPTOTRONIC Intelligent Dimmable DALI Areas of application _ Installation in emergency lighting systems according to IEC , appendix J _ Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset) _ Suitable for indoor SELV installations _ Suitable for luminaires of protection classes I and II _ Suitable for downlights, spotlights, LED panels, etc. _ Installation via Cable Clamp Kit possible (depending on version of product) _ Independent mounting via Cable Clamp Kit possible (depending on version of product) Product benefits _ Versatile DALI window driver due to flexible output characteristic _ Very high efficiency and reliability _ Protection of the system thanks to thermal management and Smart Control _ High-quality dimming of % by amplitude dimming (OTi DALI 15) Versatile scope of application due to OSRAM DALI Technology: _ Easy to use in corridors and restrooms because of three-level Corridor function _ Touch DIM application: easy to control via pushbutton or sensor _ Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light _ Suitable for emergency Installations (acc. to EN and IEC , appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable _ Feedback of power consumption and operating hours (Fit for SMART GRID) _ Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting Product features _ Supply voltage: V _ Line frequency: 0 Hz 50 Hz 60 Hz _ Line voltage: V _ Safety according to EN , , , _ RI suppression according to EN 55015:2007+A1:2007/CDN OPTOTRONIC Intelligent Page 1 of 10

2 _ Line harmonics according to EN _ Immunity according to EN _ Lifetime: up to 100,000 h (temperature at Tc = 65 C, max. 10 % failure rate) _ Independent connection via through-looping (except OTi DALI 15) OPTOTRONIC Intelligent Page 2 of 10

3 Technical data Electrical data Nominal voltage Mains frequency Input voltage AC Input voltage DC Total harmonic distortion V Hz V 1) V < 10 % V Hz V 1) V < 15 % > V Hz V 1) V < 10 % > V Hz V 1) V < 18 % > 0.95 ECG efficiency Device power loss Power loss in stand-by mode Inrush current Max. ECG no. on circuit breaker 10 A (B) 88 % 2) 2.4 W 0.27 W 5 A 3) % 2) 5.0 W <0.5 W < 20 A 8) % 2) 5.7 W <0.35 W < 20 A 8) % 2) 7.5 W <0.4 W 30 A 12) Max. ECG no. on circuit breaker 16 A (B) Power factor λ Max. ECG no. on circuit breaker 25 A (B) Surge capability (L/N- Ground) Nominal output voltage - 1 kv V 4) 60 V V 4) 60 V - 1 kv V 4) 60 V - 2 kv 13) V 4) 60 V U-OUT (working voltage) Nominal output current ma 5) ma 5) ma 5) ma 5) Output current tolerance Output ripple current (100 Hz) Nominal output power ±3 % < 2 % 18 W 6) ±5 % < 2 % 27 W 9) ±5 % < 2 % 35 W 11) ±3 % 2 % 55 W 14) Galvanic isolation Galvanic isolation primary/secondary SELV 3.75 kv 7) SELV equivalent 3.75 kv 10) 1 kv SELV equivalent 3.75 kv 10) 1 kv SELV equivalent 3.75 kv 10) 1 kv Surge capability (L- N) 1) Permitted voltage range 2) Typical 3) twidth = 45 µs (measured at 50 % I peak ) 4) Maximum 60 V OPTOTRONIC Intelligent Page 3 of 10

4 5) ±5% 6) Partial load 3 18 W 7) SELV 8) twidth = 50 µs (measured at 50 % I peak ) 9) Partial load 7 27 W 10) SELV-equivalent 11) Partial load W 12) twidth = 200 µs (measured at 50 % I peak ) 13) Functional Earth 14) Partial load W Dimensions & weight Length Width Height Product weight Cable crosssection, input side 95.0 mm 53.0 mm 30.0 mm g mm² 1) mm 67.0 mm 29.5 mm g mm² 1) mm 67.0 mm 29.5 mm g mm² 1) mm 75.0 mm 25.0 mm g mm² 1) Cable crosssection, output side Wire preparation length, input side Wire preparation length, output side mm² 1) mm mm Mounting hole spacing, length Mounting hole spacing, width mm² 1) mm mm 94.0 mm 58.0 mm mm² 1) mm mm 94.0 mm 58.0 mm mm² 1) mm mm 99.0 mm 64.0 mm 1) Solid or flexible leads OPTOTRONIC Intelligent Page 4 of 10

5 Product line drawing OPTOTRONIC Intelligent Page 5 of 10

6 Colors & materials Casing material Plastic Plastic Plastic Plastic Temperatures & operating conditions Ambient temperature range Maximum temperature at tc test point Max.housing temperature in case of fault C 75 C 1) 100 C 5 85 % 2) C 75 C 1) 110 C 5 85 % 2) C 75 C 1) 110 C 5 85 % 2) C 80 C 1) 100 C 5 85 % 2) Permitted rel. humidity during operation 1) Maximum at the Tc-point 2) Maximum 56 days/year at 85 % Lifespan ECG lifetime / h 1) / h 1) / h 1) / h 2) 1) Tc = 75 C, 0.2% / h failure rate 2) Tc = 80 C, 0.2% / 1,000 h failure rate Additional product data Encapsulated No No No No OPTOTRONIC Intelligent Page 6 of 10

7 Capabilities Dimmable Dimming interface Dimming range Dimming method No DALI / Touch DIM / Touch DIM Sensor No DALI / Touch DIM / Touch DIM Sensor No DALI / Touch DIM / Touch DIM Sensor Yes DALI / Touch DIM / Touch DIM Sensor % Amplitude Modulation % 1) Amplitude Modulation / Pulse Width Modulation 2) % 1) Amplitude Modulation / Pulse Width Modulation 3) % 1) Amplitude Modulation / Pulse Width Modulation 4) Constant lumen function Overheating protection Overload protection Programmable Automatic reversible Automatic reversible Programmable Automatic reversible Automatic reversible Programmable Automatic reversible Automatic reversible Programmable Automatic reversible Automatic reversible Short-circuit protection No-load proof Max. cable length to lamp/led module Suitable for fixtures with prot. class Automatic reversible Yes 2.0 m I / II Yes Automatic reversible Yes 2.0 m I / II Yes Automatic reversible Yes 2.0 m I / II Yes Automatic reversible Yes 2.0 m I / II Yes Suitable for emergency lighting Type of connection, output side Push terminal Push terminal Push terminal Push terminal 1) For maximum nominal output current 2) AM (> 160 ma) + PWM (< 160 ma) 3) AM (> 260 ma) + PWM (< 260 ma) 4) AM (> 450 ma) + PWM (< 450 ma) Certificates & standards Approval marks approval ENEC 10 / VDE / EMC / EL / CE ENEC 10 / VDE / EMC / EL / CE ENEC 10 / VDE / EMC / EL / CE ENEC 10 / VDE / EMC / EL / CE Standards Protection class Acc. to EN /Acc. to EN /Acc. to EN 55015/Acc. to EN II OPTOTRONIC Intelligent Page 7 of 10

8 Standards Protection class 61547/Acc. to EN /Acc. to EN Acc. to EN /Acc. to EN /Acc. to EN 55015/Acc. to EN 61547/Acc. to EN /Acc. to EN Acc. to EN /Acc. to EN /Acc. to EN 55015/Acc. to EN 61547/Acc. to EN /Acc. to EN Acc. to EN /Acc. to EN /Acc. to EN 55015/Acc. to EN 61547/Acc. to EN /Acc. to EN II II I Type of protection IP20 IP20 IP20 IP20 Logistical data Temperature range at storage C C C C Application advice For more detailed application information and graphics please see product datasheet. Sales and Technical Support Sales and Technical Support Country specific information Product code METEL-Code SEG number STK-Number UK Org OTi DALI 15/ /1A0 LT2 OTi DALI 25/ /700 LT2 OTi DALI 35/ /1A OPTOTRONIC Intelligent Page 8 of 10

9 LT2 OTi DALI 50/ /1A4 LT2 FAN Download Data File Brochures OPTOTRONIC Compact LED drivers (GB) Certificates CB-Certificate-OTi DALI 15 Certificates VDE_CB-Certificate-OTi DALI 15 Declarations of conformity Declaration of Conformity_OTi DALI 15 1A0 LT2 CAD data OTi DALI 15_CAD file_igs CAD data OTi DALI 15_CAD file CAD data OTi DALI 15_CAD file_step CAD data CAD Data OT-CableClamp-F-Style CAD data CAD Data OT-CableClamp-F-Style CAD data PDF CAD Data OT-CableClamp-F-Style Certificates ENEC Certification_OT FIT CS CAD data 3-dim CAD OTi DALI 351A0 LT2 OTi DALI LT2 CAD data 3-dim IGS - CAD OTi DALI 351A0 LT2 OTi DALI LT2 CAD data PDF CAD OTi DALI 351A0 LT2 OTi DALI LT2 Declarations of conformity DoC OTi DALI CAD data 3-dim STEP-CAD - OTI DALI A4 LT2 FAN CAD data PDF CAD - OTI DALI A4 LT2 FAN CAD data PDF IGS - CAD - OTI DALI A4 LT2 FAN OPTOTRONIC Intelligent Page 9 of 10

10 Logistical Data Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight OTi DALI 15/ /1A0 LT OTi DALI 25/ /700 LT OTi DALI 35/ /1A0 LT OTi DALI 50/ /1A4 LT2 FAN Shipping carton box 20 Shipping carton box 20 Shipping carton box 20 Shipping carton box mm x 207 mm x 90 mm 5.29 dm³ g 357 mm x 222 mm x 96 mm 7.61 dm³ g 357 mm x 222 mm x 96 mm 7.61 dm³ g 389 mm x 234 mm x 72 mm 6.55 dm³ g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Accessories Optional Accessory name Accessory code OT Cable Clamp, F-STYLE OT Cable Clamp, B-STYLE OT Cable Clamp, B-STYLE TL OT Cable Clamp, B-STYLE OT Cable Clamp, B-STYLE TL OTi DALI 50/ /1A4 LT2 FAN OTi DALI 50/ /1A4 LT2 FAN OT Cable Clamp, A-STYLE OT Cable Clamp, A-STYLE TL Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. OPTOTRONIC Intelligent Page 10 of 10