Relays & Sockets. Switching & Controls.

Transcription

1 Switching & Controls For more information on this product family, visit our website. Additional resources include: New and updated product information Downloadable software demos & upgrades Part confi guration tool & cross reference Online stock check & ordering IDEC fi eld sales & distributor search Online literature request NEW Downloadable manuals & CAD drawings Manufacturer s suggested retail price list Product training schedule & locations Advertising & trade show schedules Press releases & FAQs Selection Guide... General Purpose Relays... RH Series Compact Power Relays... RJ Series Slim Power Relays... RQ Series PCB Relays... RR Series Power Relays... RU Series Universal Relays... RY/RM Series Miniature Relays... Latching Relays... RRKP Series Latch Relays... RYKS Series Latch Relays... Solid State Relays... RSC Series DIN Mount SSR... RSS Series Panel Mount SSR... NEW Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers Table of Contents Automation & Sensing - Pg. Safety - Pg. Switching & Controls - Pg. Index - Pg.

2 Selection Guide Selection Guide Switches & Pilot Lights General Purpose Relays Appearance RH Series RJ Series RQ Series RR Series NEW Models Display Lights Page Contact Configuration SPDT, DPDT, PDT, PDT SPDT, SPST, DPDT, DPST SPDT, DPDT SPDT, DPDT, PDT Terminal Blade or PCB Blade or PCB PCB Pin or Blade Contact Rating (resistive) 0A, 0V DC/0V AC /HP, 0V AC /HP, 0V AC SPDT: A/A, 0V DC/0V AC DPDT: A, 0V DC/0V AC SPDT: A, A DPDT: A Contact Material Silver-Cadmium Oxide Silver-Nickel alloy Silver-Nickel alloy Silver 0A, 0V DC/ 0V AC /HP, 0V AC /HP, 0V AC RU Series RY/RM Series Timers Appearance Page Contact Configuration DPDT, PDT DPDT, PDT DPDT Terminal Blade or PCB Blade or PCB Contact Rating (resistive) Contact Material DPDT: 0A, 0V DC/0V AC PDT: A, 0V DC/0V AC /0 HP, 0V AC Bifurcated: A 0V AC DPDT PDT Silver Tin Oxide Indium Gold-Silver Alloy on Silver RY: DPDT: A, 0V DC/0V AC PDT: A, 0V DC/0V AC Bifurcated: A 0V DC/0V AC Standard: Gold plated silver Bifurcated: Palladium Alloy Silver A, 0V DC/0V AC Silver Circuit Breakers Terminal Blocks

3 Selection Guide Selection Guide con t Latching Relays Appearance RRKP Series RYKS Page Contact Configuration DPDT DPDT Terminal Pin Blade Contact Rating (resistive) 0A, 0V DC 0A, 0V AC A, 0V DC A, 0V AC Contact Material Silver Silver, gold-plated Solid State Relays Appearance RSC Series RSS Series Page Output Configuration Form A (SPST-NO) Form A (SPST-NO) Output Rating Output NEW 0A, 0A, A - 00V AC 0A, A, 0A, A, 0A - 0V AC Dual SCR (zero crossing) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

4 RH Series RH Series Compact Power Relays Switches & Pilot Lights SPDT through PDT, 0A contacts Compact power type relays The RH series are miniature power relays with a large capacity. The RH relays feature 0A contact capacity as large as the RR series but in a miniature package. The compact size saves space. Terminal Blocks Timers Display Lights Contact SPDT DPDT PDT PDT Model Part Number Selection Blade Terminal Part Number PCB Terminal BasicRHB-U RHV-U Coil Voltage Code (Standard Stock in bold) With Indicator RHB-UL ACV, ACV, ACV, AC0V, AC0V, With Check Button RHB-UC AC0V, AC0V DCV, DCV, DCV, With Indicator and Check Button RHB-ULC DCV, DC0V Top Bracket Mounting RHB-UT With Diode (DC coil only) RHB-UD RHV-UD DCV, DCV, DCV, DCV, DC0V With Indicator and Diode (DC coil only) RHB-ULD DCV, DCV, DCV, DC0V BasicRHB-U RHV-U With Indicator RHB-UL RHV-UL With Check Button RHB-UC With Indicator and Check Button RHB-ULC Top Bracket Mounting RHB-UT With Diode (DC coil only) RHB-UD RHV-UD With Indicator and Diode (DC coil only) RHB-ULD BasicRHB-U RHV-U With Indicator RHB-UL RHV-UL With Check Button RHB-UC With Indicator and Check Button RHB-ULC Top Bracket Mounting RHB-UT With Diode (DC coil only) RHB-D* RHV-D* With Indicator and Diode (DC coil only) RHB-LD* BasicRHB-U RHV-U With Indicator RHB-UL RHV-UL With Check Button RHB-UC With Indicator and Check Button RHB-ULC Top Bracket Mounting RHB-UT With Diode (DC coil only) RHB-UD RHV-UD With Indicator and Diode (DC coil only) RHB-LD* ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V DCV, DCV, DCV, DCV, DC00-0V ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V DCV, DCV, DCV, DCV, DC0V ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DCV, DCV, DC0V DCV, DCV, DCV, DCV, DC0V Circuit Breakers. *Carries no UL recognition mark.. PCB terminal relays are designed to mount directly to a circuit board without any socket. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RHB-U AC0V Part No. Coil Voltage Code

5 RH Series Sockets (for Blade Terminal Models) Relays Standard Mount Finger-safe Mount Through Panel Mount PCB Mount RHBSHB-0SHB-OCSHB-SHB- RHBSHB-0SHB-0CSHB-SHB- RHBSHB-0SHB-0CSHB-SHB- RHBSHB-0SHB-0CSHB-SHB- Hold Down Springs & Clips Appearance Description Relay AC Coil Ratings Voltage (V) Pullover Wire Spring Leaf Spring (side latch) Leaf Spring (top latch) AC 0Hz For DIN Mount Socket RHBSYS-0F RHBSYS-0F RHBSHB-0F RHBSHB-0F RHB, RHB, RHB, RHB SFA-0 SFA-0 RHB, RHB, RHB, RHB SFA-0 SFA-0 Rated Current (ma) ±% at 0 C AC 0Hz For Through Panel & PCB Mount Socket Min Order Qty SYS-F 0 Coil Resistance (Ω) ±0% at 0 C SPDT DPDT PDT PDT SPDT DPDT PDT PDT SPDT DPDT PDT PDT ,00, ,00, ,00, , ,00,0 DC Coil Ratings Voltage (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% at 0 C SPDT DPDT PDT PDT SPDT DPDT PDT PDT ,0,00,00, ,0 0.,00,00,0 Max. Continuous Applied Voltage 0% 0 Operation Characteristics (against rated values at 0ºC) Pickup Voltage 0% maximum. mount socket comes with two horseshoe clips. Do not use unless you plan to insert pullover wire spring. Replacement horseshoe clip part number is Y-0.. Must use horseshoe clip when mounting in DIN mount socket. Replacement horseshoe clip part number is Y-0.. Two required per relay. Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied Voltage 0% Dropout Voltage 0% minimum Pickup Voltage 0% maximum Dropout Voltage 0% minimum Standard coil voltages are in BOLD. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

6 RH Series Switches & Pilot Lights Display Lights Contact Ratings Model SPDT Continuous Current 0A Maximum Contact Capacity Allowable Contact Power Resistive Load 0VA 00W Inductive Load 0VA 0W Voltage (V) Rated Load Res. Load Ind. Load 0 AC 0A A 0 AC A.A 0 DC 0A A 0 AC 0A.A DPDT 0VA 00VA PDT 0A 0 AC.A A 00W W PDT 0 DC 0A.A Note: Inductive load for the rated load cos ø = 0., L/R = ms TÜV Ratings Voltage RH RH RH RH 0V AC 0A 0A.A.A 0V DC 0A 0A 0A 0A UL Ratings Voltage RH RH Resistive General Use Horse Power Rating RH RH RH RH RH RH RH RH 0V AC 0A.A.A A.A A / HP / HP 0V AC 0A 0A.A.A / HP / HP 0V DC 0A 0A A V DC 0A CSA Ratings Horse Voltage Resistive General Use Power Rating RH RH RH RH RH RH RH RH RH,, 0V AC 0A 0A.A A A A A / HP 0V AC 0A 0A 0A 0A.A.A.A / HP 0V DC 0A 0A 0A 0A A.A RH RH AC: cos ø =.0, DC: L/R = 0 ms Timers Terminal Blocks Socket Specifications Sockets Terminal Electrical Rating Wire Size Torque Mount Sockets Finger-safe Mount Through Panel Mount Socket PCB Mount Socket Accessories SHB-0 SHB-0 SHB-0 SHB-0 SHB-0C SHB-0C SHB-0C SHB-0C SHB- SHB- SHB- SHB- (Coil) M screws (contact) M. screws with captive wire clamp 0V, 0A Maximum up to #AWG. - in lbs -. in lbs M. screws with captive wire clamp 00V, 0A Maximum up to #AWG -. in lbs (coil) M screws (contact) M. screws with captive wire clamp, fingersafe 0V, 0A Maximum up to #AWG. - in lbs -. in lbs M. screws with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG -. in lbs Solder 00V, 0A SHB- PCB mount 0V, 0A SHB- SHB- SHB- PCB mount 00V, 0A Description Appearance Use with Part No. Remarks Aluminum ( meter length) All DIN rail sockets BNDN000 IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). Circuit Breakers End Stop Replacement Hold-Down Spring Anchor DIN rail BNL. mm wide. DIN mount sockets and hold down springs. Y-0 For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket.

7 RH Series Specifications Contact Material Contact Resistance Minimum Applicable Load Operate Time Release Time Power Consumption (approx.) Insulation Resistance Dielectric Strength Operating Frequency Vibration Resistance Shock Resistance Mechanical Life Electrical Life Operating Temperature Operating Humidity Weight (approx.) SPDT DPDT PDT PDT Silver cadmium oxide 0mΩ maximum V DC, 0 ma; V DC, 00 ma (reference value) 0ms maximum ms maximum SPDT DPDT 0ms maximum PDT PDT ms maximum SPDT AC:.VA (0Hz), VA (0Hz) DC: 0.W DPDT AC:.VA (0Hz),.VA (0Hz) DC: 0.W PDT AC: VA (0Hz),.VA (0Hz) DC:.W PDT AC:.VA (0Hz), VA (0Hz) DC:.W SPDT DPDT PDT PDT 00MΩ minimum (00V DC megger) Between live and dead parts:,000v AC, minute Between contact and coil:,000v AC, minute Between contacts of the same pole:,000v AC, minute Between live and dead parts:,000v AC, minute Between contact and coil:,000v AC, minute Between contacts of different poles:,000v AC, minute Between contacts of the same pole:,000v AC, minute Electrical: Mechanical: Damage limits: Operating extremes: Damage limits: Operating extremes: 0,000,000 operations minimum,00 operations/hour maximum,000 operations/hour maximum 0 to Hz, amplitude 0. mm 0 to Hz, amplitude 0. mm,000m/s (00G) 00m/s (0G - SPDT, DPDT) 00m/s (0G - PDT, PDT) DPDT 00,000 operations minimum (0V AC, 0A) SPDT PDT 00,000 operations minimum (0V AC, 0A) PDT SPDT to +0 C (no freezing) DPDT PDT to +0 C (no freezing) PDT to % RH (no condensation) SPDT: g, DPDT: g, PDT: 0g, PDT: g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum. Relays with indicator or diode: 000V AC, minute. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

8 RH Series Characteristics (Reference Data) Switches & Pilot Lights Electrical Life Curves AC Load 000 (RH) Life ( 0,000 operations) V AC resistive DC Load 000 (RH) Life ( 0,000 operations) V DC resistive 0V DC resistive Display Lights 0 0 0V AC inductive 0V AC inductive 0V AC resistive V DC inductive 00V DC inductive 0 (RH) 000 0V AC resistive (RH) V DC resistive Life ( 0,000 operations) V AC inductive 0V AC resistive 0V AC inductive Life ( 0,000 operations) V DC resistive 00V DC inductive 0V DC inductive (RH/RH) 000 (RH/RH) V AC resistive 00 0V DC resistive Timers Life ( 0,000 operations) 00 0 Life ( 0,000 operations) V DC inductive Terminal Blocks 0 0 0V AC inductive Maximum Switching Capacity (RH) 0.0 0V AC resistive 0V AC inductive 0 AC resistive 0 0 (RH/RH/RH) V DC resistive 00V DC inductive 0 AC resistive.0 AC inductive.0 AC inductive Circuit Breakers.0 0. DC inductive DC resistive.0 0. DC inductive DC resistive Load Voltage (V) Load Voltage (V) 0

9 RH Series Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Top Bracket Mounting Type) (RH) Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC Coil DC Coil 0 (RH) Operating Temperature ( C) Note: The rated voltage is applied to the coil. DC Coil AC Coil 0 (RH/RH) Internal Connection (View from Bottom) Basic Type SPDT DPDT PDT PDT With Check Button ( ) ( + ) With Indicator (-L type) Below 00V AC/DC 00V AC/DC and over ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) SPDT PDT PDT DPDT ( ) ( + ) ( ) ( + ) With Diode (-D type) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) SPDT DPDT PDT PDT ( ) ( + ) ( ) ( + ) 0 ( ) ( + ) 0 Below V AC/DC V AC/DC and over ( ) ( + ) Operating Temperature ( C) Note: The rated voltage is applied to the coil. AC/DC Coil 0 Front Pushbutton Contacts can be operated by pressing the check button. ( ) ( + ) ( ) ( + ) When the relay is energized, the indicator goes on. Relay coils less than 00V DC do not contain a protection diode (except DPDT). Relay coils below 00V use LED indicator, coils above 00V use neon lamp indicator. Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Available for DC coil only. Diode Characteristics Reverse withstand voltage:,000v Forward current: A Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

10 RH Series Switches & Pilot Lights Display Lights With Indicator LED & Diode (-LD type) Below 00V DC 00V DC and over SPDT PDT PDT DPDT ( ) ( + ) ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) 0 ( ) ( + ) Below V AC/DC V AC/DC and over ( ) ( + ) ( ) ( + ) Contains an LED indicator and a surge absorber, and has the same height as the basic type. Dimensions (mm) RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-UD/RHB-ULD RHB-U/RHB-UL/RHB-D/RHB-LD Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. ø. hole. Dimensions in the ( ) include a hold-down spring. Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. ø. hole. Dimensions in the ( ) include a hold-down spring. Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max. ø. hole. Dimensions in the ( ) include a hold-down spring max.... max max.. Timers RHB-U/RHB-UL/RHB-UD/RHB-LD RHB-UT RHB-UT Total length from panel surface including relay socket SHB-0:. (.) max., SHB-:. (.) max.. 0 Dimensions in the ( ) include a hold-down spring. ø. hole 0.. ø. hole Terminal Blocks. max. ø. hole max max.. RHB-UT RHB-UT Circuit Breakers ø. hole ø. hole max..... max.. max..

11 RH Series Dimensions con t (mm) RHV-U/RHV-UD max... RHV-U/RHV-UL/RHV-D max.. 0 Standard Mount Sockets SHB SHB-0. 0 M Terminal Screw M. Terminal Screw. M. Terminal Screw... (BNDN). max.. max. -ø holes.. -ø. holes min. (For terminals,, and ).. (BNDN). max. -ø. Mounting Holes (or M Tapped Holes) ø. min. max.. max.. min. -ø. holes.. (For terminals and ) -ø. Mounting Holes (or M Tapped Holes). max.. min. ø. min..... (Top View) ø. min. 0 (Top View) RHV-U/RHV-UL/RHV-UD max.. RHV-U/RHV-UL/RHV-UD SHB max.. 0 SHB M. Terminal Screw. M. Terminal Screw (BNDN) -ø. holes.. max.. -ø. holes 0 0 -ø. Mounting Holes (or M Tapped Holes). max.. min. (BNDN) ø. min. 0. -ø. Mounting Holes (or M Tapped Holes). max.. min.. max. ø. min (Top View) 0 (Top View) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

12 RH Series Dimensions con t (mm) Switches & Pilot Lights Finger-safe Mount Sockets SHB-0C. 0 M. Terminal Screw ø. M Terminal Screw.. (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View) SHB-0C. 0 M. Terminal Screw ø... (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View) Display Lights SHB-0C M. Terminal Screw ø. (BNDN) -ø. Mounting Holes (or M Tapped Holes) SHB-0C ø. (BNDN) -ø. Mounting Holes (or M Tapped Holes).. 0. Through Panel Mount Socket SHB- Ring terminals cannot be used. 0 (Top View). SHB- 0.. Ring terminals cannot be used. 0 (Top View) Timers Terminal Blocks Circuit Breakers Panel Thickness: to +0. [ (N ) +.] 0 Panel Thickness: to +0. [ (N ) +.] (Bottom View) min. N: No. of sockets mounted 0. min. when using hold-down springs (Bottom View) min. N: No. of sockets mounted 0. min. when using hold-down springs SHB- SHB- Panel Thickness: to +0. [ (N ) + 0.] 0 Panel Thickness: to +0. [ (N ) +.] (Bottom View) min. N: No. of sockets mounted 0. min. when using hold-down springs (Bottom View) min. N: No. of sockets mounted 0. min. when using hold-down springs 0..

13 RH Series Dimensions con t (mm) PCB Mount Sockets SHB-. SHB (Bottom View) 0 (Bottom View) -ø. holes... min.. min. when using hold-down springs. min.... min. when using hold-down springs.. min.. -ø holes (Tolerance 0.) min ø. holes (Tolerance ±0.) SHB-. SHB (Bottom View) 0 (Bottom View) min. when using hold-down springs.... min.. min. when using hold-down springs min min min. -ø. holes (Tolerance ±0.) -ø. holes (Tolerance ±0.) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

14 RJ Series RJ Series Slim Power Relays Circuit Breakers Terminal Blocks Timers Display Lights Switches & Pilot Lights Compact and rugged power relays. Large switching capacity. Compact housing only.-mm wide. Large contact rating RJ (-pole): A (UL general use AC) RJ (-pole): A Non-polarized LED indicator available on blade type. IDEC s unique light guide structure enables high visibility of coil status from any direction. Excellent electrical and mechanical life. Electrical life: 00,000 operations (AC load) Mechanical life: 0 million operations (AC coil) RoHS directive compliant (EU directive 00//EC). Contains no lead, cadmium, mercury, hexavalent chromium, PBB or PBDE). Diode model: Diode reverse withstand voltage: 000V UL recognized, CSA certifi ed, EN compliant. Coil Voltage Table UL0 UL File No. E CSA C. No. 0 CSA File No. LR Reg.-Nr. B Part Number Selection Terminal Contact Model Part Number Blade PCB SPDT DPDT SPDT EN0- VDE (REG.-Nr B) Coil Voltage Code (Standard Stock in bold) StandardRJS-C- A, A0, A0, A0, A0, with LED RJS-CLwith D, D, D, D00 Surge Suppresion Diode RJS-CDwith LED & Surge Suppresion Diode RJS-CLD- D, D, D, D00 StandardRJS-C- A, A0, A0, A0, A0, with LED RJS-CLwith D, D, D, D00 Surge Suppresion Diode RJS-CDwith LED & Surge Suppresion Diode RJS-CLD- D, D, D, D00 High Capacity StandardRJV-C- RJV-CH- StandardRJV-A- SPST-NO High Capacity RJV-AH- DPDT StandardRJV-C- DPST-NO StandardRJV-A- A, A0, A0, A0, A0, D, D, D, D, D, D00 EN0- EC Low Voltage Directive Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RJS-C- A0 Part No. Coil Voltage Code Coil Voltage Code A A A0 A0 A0 A0 D D D D D D00 Coil Rating V AC V AC 0V AC 0V AC 0V AC 0V AC V DC V DC V DC V DC V DC 00-0V DCV DC

15 RJ Series Sockets Blade Models PCB Models Relays Standard Mount Finger-safe Mount PCB Mount RJS (Std)SJS-0BSJS-0LSJS- RJS (Std)SJS-0BSJS-0LSJS- RJV (Std) SQV-0B*SQV-* RJV (HC) RJV *Hold-down clip or spring must be removed to use with RJ PCB relays. Accessories SQV-0B*SQV-* Description Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Replacement Hold Down Springs Part Number Used With Socket SJZ-C SQZ-C SQZ-C SJS-0B, SJS-0L, SJS-0B, SJS-0L SQV-0B, SQV-0B SQV-, SQV- Jumpers for SJ Sockets Poles Part Number Quantity SJZ-JF Must SJZ-JF purchase in SJZ-JF quantities 0 SJZ-JF0 of 0. IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). Specifications Model RJ RJ Number of Poles -pole -pole Contact Configuration SPDT DPDT Contact Material Silver-nickel alloy Degree of Protection IP0 Contact Resistance (initial value) (*) 0 mω maximum Operate Time (*) ms maximum Release Time (*) 0 ms maximum (with diode: 0 ms maximum) Dielectric Strength Vibration Resistance Shock Resistance Electrical Life (rated load) Mechanical Life (no load) Between contact and coil 000V AC, minute 000V AC, minute Between contacts of the same pole 000V AC, minute 000V AC, minute Between contacts of different poles 000V AC, minute Operating extremes Damage limits Operating Temperature (*) Operating Humidity Weight (approx.) 0 to Hz, amplitude 0. mm 0 to Hz, amplitude 0. mm Operating extremes NO contact: 00 m/s, NC contact: 00 m/s Damage limits 000 m/s Note: Above values are initial values.. Measured using V DC, A voltage drop method.. Measured at the rated voltage (at 0 C), excluding contact bounce time.. 00% rated voltage. AC load: 00,000 operations minimum (operation frequency 00 operations per hour) DC load: 00,000 operations minimum (operation frequency 00 operations per hour) AC coil: 0,000,000 operations minimum (operation frequency,000 operations per hour) DC coil: 0,000,000 operations minimum (operation frequency,000 operations per hour) 0 to +0 C (no freezing) to % RH (no condensation) g (blade type), g (PCB form C type), g (PCB form A type) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

16 RJ Series Circuit Breakers Terminal Blocks Timers Display Lights Switches & Pilot Lights Coil Ratings Coil Ratings AC DC Rated Voltage Blade & PCB Models Rated Voltage Blade Models PCB Models Coil Voltage Code Rated Current (ma) Coil Operating Characteristics ±% (at 0ºC) Resistance Without LED With LED (ohms)±0% Pickup Dropout Maximum 0Hz 0Hz 0Hz 0Hz (at 0ºC) Voltage Voltage Allowable Voltage V A.... 0V A0....,00 0V A0....,0 Coil Voltage Code Rated Current (ma) ±% (at 0ºC) Coil Resistance Without LED With LED (ohms)±0% Pickup (at 0ºC) Voltage Power Consumption 0% max 0% min 0% 0.VA (0Hz) Operating Characteristics Dropout Voltage Maximum Allowable Voltage V D..0 V D..,00 0% 0% max 0% min V D.0 0.,0 00-0V D ,0 0% V D 0. V D.. V D. 0% 0% max 0% min V D.,00 V D.0,0 00-0V D00. -.,0 0%. LED Indicator is only available on Blade relays.. Operating characteristics are at 0ºC.. The maximum allowable voltage is the maximum value which can be applied to the relay coils. Contact Ratings Contact Ratings Blade Models PCB Models Model pole Agency Ratings pole poles poles Standard Type High Capacity Type Contact Allowable Contact Power Resistive Load Inductive Load Voltage Rated Load Resistive Load Inductive Load cosø=0. L/R=ms Allowable Switching Current Allowable Switching Voltage NO NC 000V AC 000V AC VA VA 0V AC 0V AC A A.A.A A A AC0V DC0V NO 000V AC 000VA 0V AC A A A AC0V NC 000V AC 000VA 0V AC A A A DC0V NO 000V AC VA 0V AC A.A A 0W 0W 0V DC A A AC0V NC 000V AC VA 0V AC A.A DCV A 0W 0W 0V DC A A NO 000V AC 000VA 0V AC A A A 0W 0W 0V DC A A AC0V NC 000V AC 000VA 0V AC A A DCV A 0W 0W 0V DC A A NO 000V AC 000VA 0V AC A A A 0W 0W 0V DC A A AC0V NC 000V AC 000VA 0V AC A A DCV A 0W 0W 0V DC A A Power Consumption 0.W 0.-0.W Minimum Applicable Load UL CSA VDE Voltage General Use Resistive Inductive Resistive AC-, DC-* RJ RJ RJ RJ RJ RJ RJ RJ RJ RJ NO NC NO NC NO NC NO NC NO NC NO NC NO NO NO NO 0V AC A A A A A A A A.A.A A A A A A A 0V DC A A A A A A A A A A A A A A.A A *According to the utilization categories of IEC0-- DCV 00mA DCV 00mA DCV 00mA DCV 00mA DCV 0mA

17 RJ Series Socket Specifications / Panel Mount Finger-safe / Panel Mount PCB Mount Socket Terminal Electrical Rating Wire Size Torque SJS-0B M screw with captive wire clamp 0V, A Maximum up to - # AWG SJS-0B M screw with captive wire clamp 0V, A Maximum up to - # AWG SJS-0L M screw with captive wire clamp, fingersafe 0V, A Maximum up to - # AWG N m (Maximum.N m) N m (Maximum.N m) N m (Maximum.N m) SJS-0L M screw with captive wire clamp, fingersafe 0V, A Maximum up to - # AWG N m (Maximum.N m) SQV-0B M screw with box clamp, fingersafe 00V, A Maximum up to - # AWG.0N m Maximum SQV-0B M screw with box clamp, fingersafe 00V, 0A Maximum up to - # AWG.0N m Maximum SJS- PCB mount 0V, A SJS- PCB mount 0V, A SQV- PCB mount 00V, A SQV- PCB mount 00V, A Electrical Life Curve (Resistive Load) RJ RJ High Capacity RJ ( 0,000 operations) V DC Resistive Load (NO Contact) 0V AC Resistive Load (NO contact) ( 0,000 operations) V DC Resistive Load (NO Contact) 0V AC Resistive Load (NO contact) Maximum Switching Capacity (Resistive Load) RJ RJ High Capacity RJ 0 AC Resistive (NO Contact) DC Resistive (NO Contact) Load Voltage (V) 0 DC Resistive (NC Contact) DC Inductive (NO Contact) DC Inductive (NC Contact) AC Resistive DC Resistive (NO Contact) Load Voltage (V) AC Inductive ( 0,000 operations) V DC Resistive Load (NO Contact) AC Resistive (NO Contact) DC Resistive (NO Contact) Load Voltage (V) V AC Resistive Load (NO contact) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

18 RJ Series Switches & Pilot Lights Display Lights Operating Temperature and Coil Temperature Rise RJ (AC Coil, 0 Hz) RJ (AC Coil, 0 Hz) RJ (DC Coil) Temperature Rise ( C) AC Coil (0 Hz) Load Current A pole No Load Current Ambient Temperature ( C) Temperature Rise ( C) AC Coil (0 Hz) Load Current A pole No Load Current Ambient Temperature ( C) RJ (AC Coil, 0 Hz) RJ (AC Coil, 0 Hz) RJ (DC Coil) Temperature Rise ( C) DC Coil Load Current A poles No Load Current Ambient Temperature ( C) 0 Temperature Rise ( C) AC Coil (0 Hz) Load Current A poles No Load Current Ambient Temperature ( C) The above temperature rise curves show characteristics when 00% the rated coil voltage is applied. The slanted dashed line indicates allowable temperature rise for the coil at different ambient temperatures. Temperature Rise ( C) Temperature Rise ( C) DC Coil Load Current A pole No Load Current Ambient Temperature ( C) DC Coil Load Current A poles No Load Current Ambient Temperature ( C) 0 Timers Terminal Blocks Circuit Breakers Internal Connection (View from Bottom) RJS-C-* Standard (A) (A) () () () RJS-CL-* With LED Indicator (A) (A) () () () Coil voltage V AC/DC and below RJS-CD-* With Diode (A) (A) + () () () (A) (A) RJS-CLD-* With LED Indicator and Diode (A) (A) + () () () Coil voltage V DC and below () () () Coil voltage greater than V AC/DC (A) (A) + () () () Coil voltage greater than V DC RJS-C-* Standard (A) (A) () () () () () () RJS-CL-* With LED Indicator (A) (A) () () () () () () Coil voltage V AC/DC and below RJS-CD-* With Diode (A) (A) + () () () () () () (A) (A) RJS-CLD-* With LED Indicator and Diode (A) (A) + () () () () () () Coil voltage V DC and below () () () () () () Coil voltage greater than V AC/DC (A) () () () + (A) () () () Coil voltage greater than V DC 0

19 RJ Series Blade Relay (mm) RJS.0 ø. hole PCB Relay (mm) RJV-C-*. max. (.) max. (.) RJV-CH-*/RJV-C-*. max. (.) max. (.).0.0. max. (.) max. (.).0.0 (.) (.) (.) 0.. -ø. holes 0.0 -ø. holes.0 (.) Dimensions (mm)..0. RJS ø. hole 0... RJV-A-*. max. (.) max. (.) RJV-AH-*/RJV-A-*. max. (.) max. (.) All dimensions in mm. max. (.) max. (.).0.0 (.) (.). -ø. holes (.) 0.0 -ø. holes... (.) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

20 RJ Series Switches & Pilot Lights Standard Mount Sockets SJS-0B. M Terminal Screws Dimensions con t (mm) SJS-0B. M Teminal Screws Display Lights (A) () (A) () () (TOP VIEW) Terminal Blocks..... ø. ø () () (A) () (A) () () () (TOP VIEW) Finger-safe Mount Sockets SJS-0L SJS-0L. M Teminal Screws ø.. M Terminal Screws Timers ø ø. ø (A) (A) () () () (TOP VIEW) (A) (A) () () () () () () (TOP VIEW) SQV-0B SQV-0B Circuit Breakers A A (TOP VIEW) A A (TOP VIEW)

21 RJ Series Dimensions con t (mm) PC Mount Sockets SJS SQV- (.).0 ±0..0 ±0. ±0. ± ±0..0 ±0. (Bottom View) -ø. holes SJS SQV-..0 (.). ± ±0..0 ±0. ±0..0 (Bottom View) -ø. holes Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

22 RQ Series RQ Series PCB Relays Switches & Pilot Lights Display Lights IDEC RQ relays are low-profile, PCB relays that provide quality within a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger power needs, a A model is also available. Low profile: x. x mm Contact rating: A (DPDT) and A (SPDT) High capacity model with A (SPDT) contact rating Operational life: 00K cycles at full resistive load 0 million cycles, no load LED/Diode Plug-in modules available with DIN rail socket UL Recognized File No. E0, Vol R Part Number Selection Part Number Contact Model Pin Terminal Coil Voltage Code SPDT A BasicRQV-CM-0 A, A, A0, D, D Timers SPDT A HIgh Capacity (HC) RQV-CH-0 A, A, A0, D, D, D0 DPDT A Terminal Blocks Basic RQV-CN-0 A, A, A0, D, D, D0 Circuit Breakers Coil Voltage Table Coil Voltage Code A A A0 D D D0 Coil Rating V AC 0-0V AC 0-0V AC V DC V DC 0V DC Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RQV-CM A Part No. Coil Voltage Code

23 RQ Series Sockets Relays Finger-safe DIN Rail Mount PCB Mount RQSQV-0B SQV-* RQ RQ HC SQV-0B SQV-*. *Comes with hold down spring. Comes with retaining clip and marking plate. Replacement Parts & Accessories Part Number Description Part Number Description SQZ-C Replacement retaining clip SQZ-LD Diode plug in modules for DIN socket SQZ-C Replacement hold-down spring for SQ PCB sockets SQZ-LR RC plug-in module (0-0V AC) for DIN socket SQZ-J pt jumper for DIN socket SQZ-P Replacement marking plate Accessories Description Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Specifications Model (Contact) RQ RQ HC RQ No. of poles Contact Configuration SPDT SPDT DPDT Contact Rating A A A Contact Material Silver-Nickel alloy Contact Resistance 00mΩ max Operating Time ms Release Time ms Dielectric Strength Vibration Resistance Between contact & coil Between contacts Damage limits Operating extremes,000vac, minute,000vac, minute 0- Hz, amplitude.mm 0- Hz, amplitude.mm Shock Resistance Damage limits 00m/s min (0G) Operating extremes,000m/s min (00G) Mechanical Life 0,000,000 operations Electrical Full Rated Load 00,000 operations Operating Temperature -0 to º C Operating Humidity to % RH Dimensions (H x W x D mm) x. x Weight (Approx.) g IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

24 RQ Series Switches & Pilot Lights Display Lights Coil Ratings Rated Voltage Nominal Current Coil Power Consumption 0HZ 0HZ Resistance 0HZ 0HZ Pickup Voltage Dropout Voltage Max Allowable Voltage V.mA 0Ω DC V.mA,0Ω 0.0W 0% Max % Min 0% 0V.mA,0Ω V.mA.mA 0Ω 0.W 0.W AC V.mA.mA,00Ω 0.W 0.W 0% Max 0% Min 0% 0V.mA.mA,00Ω 0.W 0.W Socket Specifications Relays Terminal Electrical Rating Wire Size Torque Sockets SQV-0B M screw with box clamp 00V, A Maximum up to - # AWG.0N m Maximum SQV-0B M screw with box clamp 00V, A Maximum up to - # AWG.0N m Maximum PCB Mount Socket SQV- PCB mount 00V, A SQV- PCB mount 00V, A Electrical Life Curves Maximum Switching Capacity RQ & RQ High Capacity RQ RQ, RQ High Capacity & RQ (V) 0 0 load 00 Operations 0 Operations 0 of Voltage Timers 0 0 RQ RQ-HC RQ RQ RQ-HC Internal Connection (View from Bottom) RQ RQ RQ HC Terminal Blocks NC C Circuit Breakers NO NC NC C C NO NO NC C NO

25 RQ Series Dimensions (mm) RQ RQ/RQ HC SQ Socket Domensions SQV-0B SQV-0B A A A A (TOP VIEW) (TOP VIEW) SQV- PCB Pin Layout SQV- SQV- PCB Pin Layout SQV- Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

26 RR Series RR Series Power Relays Switches & Pilot Lights SPDT through PDT, 0A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and side fl ange. DIN rail, surface and panel mount sockets are available for a wide a variety of mounting applications. Display Lights Part Number Selection Part Number Contact Model Pin Terminal Blade Terminal* SPDT Basic RRBA-U With Indicator RRBA-UL With Check Button RRBA-UC With Indicator and Check Button RRBA-ULC Side Flange Model RRBA-US DPDT BasicRRP-URRBA-U With Indicator RRP-UL RRBA-UL With Check Button RRP-UC RRBA-UC With Indicator and Check Button RRP-ULC RRBA-ULC Side Flange Model RRBA-US PDT BasicRRPA-URRB-U With Indicator RRPA-UL RRB-UL With Check Button RRPA-UC RRB-UC With Indicator and Check Button RRPA-ULC RRB-ULC Coil Voltage Code (Standard Stock Items in Bold) ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V, DCV, DCV, DCV, DCV, DC0V Timers Terminal Blocks Sockets RRP RRPA *Blade type not TUV tested or CE marked. Side Flange Model RRB-US Relays Standard Mount Finger-safe Mount Through Panel Mount SRP-0 SRP-0 SRP-0 SRP-0 SRP-0CSRP- SRP-0CSRP- Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RRB-U AC0V Part No. Coil Voltage Code RRBA RRBA RRB SRB-0 SRB- Circuit Breakers All DIN rail mount sockets shown above can be mounted using DIN rail BNDN000.

27 RR Series Hold Down Springs & Clips Appearance Description Relay Accessories Pullover Wire Spring Leaf Spring (side latch) For DIN Mount Socket For Through Panel & PCB Mount Socket RRPSRB-0F SRP-0F RRPASRB-0F RRBA, RRBA, SRB-0FSRB-0F RRB Min Order Qty 0 pcs RRP, RRPA SFA-0 0 pcs Description Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop Replacement Hold-Down Spring Anchor All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Horseshoe clip for sockets SRB-0, SRP-0, SRP-0 Chair clip for sockets SRP-0(C), SRP-0(C) Y-0 Y0-0 Specifications Contact Material Silver Contact Resistance 0 mω maximum Minimum Applicable Load V DC, 0 ma Operate Time ms maximum Release Time ms maximum Power Consumption (approx.) AC: VA (0 Hz),. VA (0 Hz) DC:.W Insulation Resistance 00 MΩ minimum (00V DC megger) Between live and dead parts: 00V AC, minute Pin Terminal Between contact and coil: 00V AC, minute Between contacts of different poles: 00V AC, minute Dielectric Between contacts of the same pole: 000V AC, minute Strength Between live and dead parts: 000V AC, minute Blade Terminal Between contact and coil: 000V AC, minute Between contacts of different poles: 000V AC, minute Between contacts of the same pole: 000V AC, minute Operating Frequency Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Vibration Resistance Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Shock Resistance Damage limits: 000 m/s (00g) Operating extremes: 00 m/s (0G) Mechanical Life 0,000,000 operations Electrical Life 00,000 operations (0V AC, A) Operating Temperature to +0 C (no freezing) Operating Humidity to % RH (no condensation) Weight (approx.) (Basic type) RRP: 0g, RRPA: g, RRBA/RRBA/RRB: g IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

28 RR Series Switches & Pilot Lights Display Lights Coil Ratings Rated Voltage (V) AC (0/0 Hz) DC Rated Current (ma) ±% (at 0 C) 0 Hz 0 Hz Coil Resistance (Ω) ±0% (at 0 C) ,0 0 0., , ,00 0,0 Maximum Continuous Applied Voltage Operating Characteristics (values at 0 C) Pickup Voltage Dropout Voltage 0% 0% maximum 0% minimum 0% 0% maximum 0% minimum Timers Contact Ratings Continuous Current 0A Maximum Contact Capacity Allowable Contact Power Resistive Load 0VA AC 00W DC Inductive Load 00VA AC 0W DC Note: Inductive load for the rated load cos ø = 0., L/R = ms TÜV Ratings Voltage 0V AC 0V DC 0A 0A Rated Load Voltage (V) Res. Load Ind. Load 0 AC 0A.A 0 AC.A A 0 DC 0A A AC: cos ø =.0, DC: L/R = 0 ms UL Ratings Voltage Resistive General use Horse Power Rating 0V AC 0A A / HP 0V AC 0A.A / HP 0V DC 0A A CSA Ratings Voltage Resistive General use 0V AC 0A A 0V AC 0A.A 00V DC 0.A 0V DC 0A.A Terminal Blocks Circuit Breakers Socket Specifications Relays Terminal Electrical Rating Wire Size Torque Sockets Through Panel Mount Sockets SRP-0 M screw with captive wire clamp 00V, 0A - AWG -.in lbs SRP-0C M screw with captive wire clamp, fingersafe 00V, 0A - AWG -.in lbs SRP-0 M screw with captive wire clamp 00V, 0A - AWG -.in lbs SRP-0 M screw with captive wire clamp 00V, 0A - AWG -.in lbs SRP-0C M screw with captive wire clamp, fingersafe 00V, 0A - AWG -.in lbs SRP-0 M screw with captive wire clamp 00V, 0A - AWG -.in lbs SRB-0 M screw with captive wire clamp 00V, A (0A)* (*CSA rating) - AWG -.in lbs SRP- Solder 00V, 0A SRP- Solder 00V, 0A SRB- Solder 00V, 0A 0

29 RR Series Characteristics (Reference Data) Electrical Life Curves AC Load Life ( 0,000 operations) V AC resistive 0 0V AC resistive 0V AC inductive 0 0V AC inductive Maximum Switching Capacity DC resistive DC inductive AC resistive AC inductive Load Voltage (V) DC Load Life ( 0,000 operations) V DC resistive 00V DC inductive 0 0V DC resistive 0V DC inductive Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Side Flange Type) Operating Temperature ( C) AC Coil DC Coil 0 Internal Connection (View from Bottom) Basic Type RRP-U RRPA-U RRBA-U RRBA-U RRB-U With Check Button ( ) (+) ( ) 0 (+) A B ( ) ( + ) A B ( ) ( + ) A B ( ) ( + ) With Indicator (-UL type) RRP RRPA RRBA RRBA RRB Coil Below 00V ( ) AC/DC Coil 00V AC/DC and over ( ) (+) (+) ( ) ( ) 0 (+) 0 (+) A B ( ) ( + ) A B ( ) ( + ) A B ( ) ( + ) A B ( ) ( + ) Front Pushbutton Contacts can be operated by pressing the check button. A B ( ) ( + ) A B ( ) ( + ) When the relay is energized, the indicator goes on. The LED protection diode is not contained in relay coils below 00V DC. Coils below 00V use LED indicator while coils above 00V use neon lamp indicator. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

30 RR Series Dimensions (mm) Switches & Pilot Lights RRP-U/RRP-UL Total length from panel surface including relay socket SRP-0:. (.) max., SRP-: () max.. RRPA-U/RRPA-UL Total length from panel surface including relay socket SRP-0:. (.) max., SRP-: () max. 0.. max... Dimensions in the ( ) include a hold-down spring.. max... Dimensions in the ( ) include a hold-down spring. Display Lights RRBA-U/RRBA-UL/RRBA-U RRBA-UL/RRB-U/RRB-UL. RRBA-US/RRBA-US/RRB-US...0 ø.0 oblong hole -ø. Mounting Holes.0 ø.0 oblong hole Total length from panel surface including relay socket SRB-0: () max., SRB-: (0) max.. max..... max.. 0. A Dimensions in the ( ) include a hold-down spring. B 0. A B Standard Mount Sockets Timers SRP-0 M. Terminal Screw (BNDN) -ø. Mounting Holes (or M Tapped Holes) SRP-0 0 M. Terminal Screw. (BNDN) -ø. Mounting Holes (or M Tapped Holes) Terminal Blocks SRP-0 ø ø. hole M. Terminal Screw. 0.. max.. max. min. (BNDN) ø. min. -ø. Mounting Hole (or M Tapped Holes) (Top View) 0 SRP-0 ø. hole ø M. Terminal Screw.. max.. max. min. (BNDN) ø. min. -ø. Mounting Holes (or M Tapped Holes) (Top View) Circuit Breakers ø. hole ø. 0.. max. min.. max. ø. min. 0 (Top View) 0 ø. hole ø. max. min.. max. ø. min. 0 (Top View)

31 RR Series Standard Mount Sockets SRB-0 M. Terminal Screw.. (BNDN). Finger-safe Mount Sockets SRP-0C. ø ø. hole.. 0 Through Panel Mount Socket SRP- 0. SRB ø Panel Surfarface. max. 0.. (BNDN). max. -ø. Mounting Holes (or M Tapped Holes). max.. min. ø. min. -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. (Bottom View) A B (Bottom View).. min. ø0. B A (Top View) (Top View) -ø. Mounting Holes (or M Tapped Holes) -ø. Mounting Holes (M Tapped Holes). (Tolerance ±0.) When two or more sockets are mounted side by side: L = (N ) +. N: No. of sockets mounted SRP-0C. SRP- 0. ø ø. hole ø Panel Surfarface (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring type crimping terminals cannot be used. 0 (Bottom View) ø0 0 (Top View) -ø. Mounting Holes (or M Tapped Holes) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

32 RU Series RU Series Universal Relays Switches & Pilot Lights Display Lights Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal wires, lead-free construction Cadmium-free contacts Mechanical flag indicator available on plug-in relays Manual latching lever with color coding for AC or DC coil Snap-on yellow marking plate; optional marking plates are available in four other colors Maximum contact ratings: 0A (RU), A (RU), A (RU) UL Recognized, CSA Certifi ed, EN Compliant UL0 CSA C. No. File No. E0 CSA C. No. CSA File No. LR EN0- Timers With Latching or Momentary Lever Mechanical Indicator* The contact position can be confirmed through the fi ve small windows. Marking Plate Standard yellow marking plate is easily replaced with optional marking plates in four colors for easy identifi cation of relays. LED Indicator* Non-polarized green LED indicator is standard provision for plug-in terminal, latching lever types Latching and Momentary Lever Using the lever, operation can be checked without energizing the coil. The lever is color coded for AC and DC coils. Latching Momentary AC coil: Orange Red DC coil: Green Blue In Normal Operation Note: Turn off the power to the relay coil when using the latching lever. After checking the operation, return the latching lever in the normal position. Terminal Blocks Standard (without lever) Mechanical Indicator* Marking Plate AC/DC Color Marking For identification of AC or DC coils. AC coil: Yellow DC coil: Blue Coil Voltage Tape Color V AC White 00 to 0V AC Clear Circuit Breakers LED Indicator* Non-polarized green LED indicator is standard provision for plug-in terminal types. *Not available on PCB type. AC Coil DC Coil 0 to 0V AC Blue 00 to 0V AC Black 0 to 0V AC Red V DC Green V DC V DC V DC 0V DC Voltage marking on yellow tape

33 RU Series Part Number Selection Part Number Contact Model Standard With Latching Lever With Momentary Lever Coil Voltage Code (Standard Stock in bold) PDT (A) PDT Bifurcated (A) PCBRUV-NF- A, A0, A0 D, D, D, D, D0 DPDT (0A) StandardRUS-C-RUS-RUS-M- A, A0, A0 D, D, D, D, D0 With RC (AC coil only) RUS-CR- RUS-R- RUS-MR- A0, A0 With diode (DC coil only) RUS-CD- RUS-D- RUS-MD- D, D, D, D, D0 StandardRUS-C-RUS-RUS-M- A, A0, A0 D, D, D, D, D0 With RC (AC coil only) RUS-CR- RUS-R- RUS-MR- A0, A0 With diode (DC coil only) RUS-CD- RUS-D- RUS-MD- D, D, D, D, D0 PCBRUV-NF- A, A0, A0 D, D, D, D, D0 StandardRUS-C- RUS-RUS-M- A, A0, A0 D, D, D, D, D0 With RC (AC coil only) RUS-CR- RUS-R- RUS-MR- A0, A0 With diode (DC coil only) RUS-CD- RUS-D- RUS-MD- D, D, D, D, D0 PCBRUV-NF- A, A0, A0 D, D, D, D, D0. Plug-in terminal models have an LED indicator and a mechanical indicator as standard.. PCB models do not have an LED indicator or a mechanical indicator. Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RUS-C A0 Coil Voltage Table Coil Voltage Code A A0 A0 D D D D D0 Coil Rating V AC 0-0V AC 0-0V AC V DC V DC V DC V DC 0V DC Sockets Relays Spring Clamp Mount Standard DIN Rail Mount Finger-safe DIN Rail Mount RUS (DPDT) SUS-L SMS-0 SMS-0C RUS (PDT) RUS (PDT) SUS-L SYS-0 SYS-0C Panel Mount SYS- PCB Mount SMS- SMS- SYS- SYS- Part No. Coil Voltage Code Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

34 RU Series Switches & Pilot Lights Hold Down Springs & Clips Appearance Description Relay Pullover Wire Spring RUS/RUS/ RUS For DIN Mount Socket For Through Panel & PCB Mount Socket Min Order Qty SYS-0FSYS-F 0 Display Lights Accessories Leaf Spring (side latch) Leaf Spring (top latch) RUS/RUS/ RUS RUS/RUS/ RUS SFA-0SFA-0 SFA-0SFA-0 Name Part Number Color Code * Min. Order Qty. 0 Marking Plate RUZ-P* A (orange), G (green), S (blue), W (white), Y (yellow) 0 Specify a color code when ordering. The marking plate can be removed from the relay by inserting a fl at screwdriver under the marking plate. Circuit Breakers Terminal Blocks Timers Specifications Model (Contact) RU (DPDT) RU (PDT) RU (PDT) Contact Material Silver alloy Silver (gold clad) Silver-nickel (gold clad) Contact Resistance 0 mω maximum Minimum Applicable Load Operate Time Release Time V DC, ma (reference value) V DC, ma V DC, 0. ma 0 ms maximum 0 ms maximum Power Consumption AC:. to.va (0 Hz), 0. to.va (0 Hz) DC: 0. to.0w Insulation Resistance 00MΩ minimum (00V DC megger) Dielectric Strength Operating Frequency Vibration Resistance Shock Resistance Between contact and coil: 00V AC, minute Between contacts of different poles: 00V AC, minute 000V AC, minute Between contacts of the same pole: 000V AC, minute Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Damage limits: 0 to Hz, amplitude 0. mm Operating extremes: 0 to Hz, amplitude 0. mm Damage limits: 000 m/s (00G) Operating extremes: 0 m/s (G) AC: 0,000,000 operations Mechanical Life 0,000,000 operations DC: 00,000,000 operations Electrical Life See table on page Operating Temperature Operating Humidity Weight PCB model: to +0 C (no freezing) Blade model: to +0 C (no freezing) to % RH (no condensation) Approx. g. Measured using V DC, A voltage drop method. Measured at operating frequency of 0 operations/min (failure rate level P, reference value). Measured at the rated voltage (at 0 C), excluding contact bouncing; Release time of AC relays with RC: ms maximum Release time of DC relays with diode: 0 ms maximum. Contact Load and Electrical Life (at ambient temperature 0 C). Measured at the rated voltage.

35 RU Series Accessories Description Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop Replacement Hold-Down Spring Anchor Coil Ratings Rated Voltage (V) AC (0/0 Hz) DC Coil Voltage Code All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Horseshoe clip for DIN rail sockets Rated Current (ma) ±% (at 0 C) Coil Resistance (Ω) ±0% (at 0 C) 0 Hz 0 Hz A A ,0 0-0 A ,0 D 0 D 0 0 D. 0 D,0 0 D0.,00. The rated current includes the current of the LED indicator. Surge Suppressor Ratings Model AC Coil With RC DC Coil Contact Ratings Contact DPDT PDT PDT bifurcated Continuous Current 0A A A With Diode RC series circuit R: 0 kω, C: 0.0 μf Ratings Diode reverse voltage: 000V Diode forward current: A Maximum Contact Capacity Y-0 Allowable Contact Power Voltage Rated Load Resistive Load Inductive Load (V) Res. Load Ind. Load 00VA AC 0VA AC 0 AC 0A A 00W DC 0W DC 0 DC 0A A 00VA AC 00VA AC 0 AC A 0.A 0W DC 0W DC 0 DC A.A 0VA AC 00VA AC 0 AC A 0.A 0W DC W DC 0 DC A.A. On PDT relays, the maximum allowable total current of neighboring two poles is A. At the rated load, make sure that the total current of neighboring two poles does not exceed A (A + A = A).. Inductive load for the rated load cos ø = 0., L/R = ms IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Maximum Continuous Applied Voltage Operating Characteristics (values at 0 C) Pickup Voltage Dropout Voltage 0% 0% maximum 0% minimum 0% 0% maximum 0% minimum UL and c-ul Ratings Voltage Resistive General Use Horse Power Rating RU RU RU RU RU RU RU RU RU 0V AC 0A A A /0HP 0V DC 0A A A CSA Ratings Voltage 0V AC 0V DC Resistive RU A A TÜV Ratings Voltage Resistive Inductive RU RU RU RU RU RU 0V AC 0A A A A 0.A 0.A 0V DC 0A A A A.A.A Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

36 RU Series Switches & Pilot Lights Display Lights Socket Specifications Mount Sockets Through Panel Mount Socket Sockets Terminal Electrical Rating Wire Size Torque SUS-L Spring clamp terminals 0V/0A - AWG SUS-L Spring clamp terminals 0V/A (using RU), 0A (using RU) - AWG SMS-0 M screw with captive wire clamp 00V, 0A Maximum up to #AWG. - in lbs SMS-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG. - in lbs SYS-0 M screw with captive wire clamp 00V, A (using RU), 0A (using RU) Maximum up to #AWG. - in lbs SYS-0C M screw with captive wire clamp, fingersafe 00V, A (using RU), 0A (using RU) Maximum up to #AWG. - in lbs SYS- Solder 00V, A PCB Mount Socket SYS- PCB mount 00V, A SYS- PCB mount 0V, A Electrical Life Curves RU (Resistive Load) RU (Resistive Load) RU (Resistive Load) 000 0V AC 0V DC 0V DC 0V AC 0V DC 0V DC 0V AC 0V DC 0V DC Timers Terminal Blocks ( 0,000 operations) ( 0,000 operations) ( 0,000 operations) RU (Inductive Load) RU (Inductive Load) RU (Inductive Load) ( 0,000 operations) AC: cos ø = 0. DC: L/R = ms 0V AC/0V DC 0V DC ( 0,000 operations) 00 0 AC: cos ø = 0. DC: L/R = ms 0.0 0V AC 0V DC 0V DC ( 0,000 operations) 00 0 AC: cos ø = 0. DC: L/R = ms Maximum Switching Current RU RU RU (Bifurcated) 0.0 0V AC 0V DC 0V DC AC resistive AC inductive (cos ø = 0.) AC resistive AC inductive (cos ø = 0.) AC resistive AC inductive (cos ø = 0.) Circuit Breakers 0. DC resistive DC inductive L/R = ms 0. DC resistive DC inductive L/R = ms 0. DC resistive DC inductive L/R = ms Load Voltage (V) Load Voltage (V) Load Voltage (V)

37 RU Series Ambient Temperature vs. Temperature Rise Curves RU (AC Coil, 0 Hz) RU (AC Coil, 0 Hz) RU (DC Coil) Temperature Rise ( C) Load current 0A poles Load current A poles No load current Ambient Temperature ( C) 0 Temperature Rise ( C) Load current 0A poles Load current A poles No load current Ambient Temperature ( C) Temperature Rise ( C) Load current 0A poles Load current A poles RU/RU (AC Coil, 0 Hz) RU/RU (AC Coil, 0 Hz) RU/RU (DC Coil) Temperature Rise ( C) Load current A poles Load current A poles No load current Temperature Rise ( C) Load current A poles Load current A poles No load current Ambient Temperature ( C) Ambient Temperature ( C) The above temperature rise curves show the characteristics when 00% the rated coil voltage is applied. The heat resistance of the coil is 0 C. The slant dashed line indicates the allowable temperature rise for the coil at different ambient temperatures. Load current A x poles is for the RU models only. Temperature Rise ( C) No load current Ambient Temperature ( C) Load current A poles Load current A poles No load current Ambient Temperature ( C) 0 Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

38 RU Series Switches & Pilot Lights Internal Connection (View from Bottom) RUS-* Standard RUS-*R with RC RUS-*D With Diode RUV-NF-* () () () () () () () () () () () () () () () () () () () () () ()A ()A ()A ()A ()A ()A ()A V AC/DC coil or less V DC coil or less () () () ()A () () () () () () () () () () () () Display Lights ()A ()A ()A ()A Over V AC/DC coil Over V DC coil RUS-*/RUS-* Standard RUS-*R/RUS-*R With RC RUS-*D/RUS-*D With Diode RUV-NF-*/RUV-NF-* () () () () () () () () () () () () () () () () () () () () () () () () () () () () () () () () () (0) () () () (0) () () () (0) () () () (0) () () ()A ()A ()A ()A ()A ()A ()A ()A V AC/DC coil or less () () () () () () () () () (0) () () V DC coil or less () () () () () () () () () (0) () () ()A ()A ()A ()A Over V AC/DC coil Over V DC coil Dimensions (mm) Timers RUS RUV Marking Plate Removal Slot.0 Marking Plate Removal Slot Terminal Blocks ø.. Hole Marking plate removal slot is provided only on one side. Insert a flat screwdriver into the slot to remove the marking plate Mounting Hole Layout.0 -ø Holes. 0.. Circuit Breakers... All dimensions in mm. 0

39 RU Series RUS Marking Plate Removal Slot.0 Spring Clamp Mount Sockets SUS-L ø.. Hole Marking plate removal slot is provided only on one side. Insert a flat screwdriver into the slot to remove the marking plate...0 Standard Mount Sockets SMS M Terminal Screw.. (BNDN) -ø. Mounting Holes Ring terminals cannot be used. -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. Dimensions con t (mm) (Top View) (Top View) RUV, RUV SUS-L 0.. Marking Plate Removal Slot SYS Mounting Hole Layout.0... M Terminal Screw ø Holes...0 (BNDN) All dimensions in mm. -ø. Mounting Holes Ring terminals cannot be used. -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. 0 (Top View) 0 (Top View) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

40 RU Series Dimensions con t (mm) Switches & Pilot Lights Finger-safe Mount Sockets SMS-0C 0 ø.. M Terminal Screw. (BNDN) -ø. Mounting Holes (or M Tapped Holes) SYS-0C 0. M Terminal Screw ø.. (BNDN) -ø. Mounting Holes (or M Tapped Holes).. Ring terminals cannot be used. (Top View).. Ring terminals cannot be used. 0 (Top View) Display Lights PCB Mount Sockets SMS- SMS-. SYS (Bottom View). min... min. when using hold-down springs min. -ø holes (Tolerance ±0.) Timers Terminal Blocks Circuit Breakers.. SYS- 0. (Bottom View) 0... min..... min. -ø holes (Tolerance ±0.). min. when using a hold-down spring.. min. when using a hold-down spring for the relay with check button (Bottom View). min... min. when using hold-down springs min. -ø holes (Tolerance ±0.) (Bottom View) 0... min min. -ø holes (Tolerance ±0.). min. when using a hold-down spring.. min. when using a hold-down spring for the relay with check button Through Panel Mount Socket SYS-. Panel Thickness: to (Bottom View) min. +0. [ (N ) +.] 0 N: No. of sockets mounted.. 0. min. when using hold-down springs

41 RY/RM Series RY/RM Series Miniature Relays RY (A), RY (A), RM (A) Bifurcated contacts are also available The RY/RM series are general purpose miniature relays with a A or A contact capacity. A wide variety of terminal styles and coil voltages meet a wide range of applications. All PDT types have arc barriers. Part Number Selection Part Number Contact Model Plug-in Terminal PC Board Terminal Coil Voltage Code DPDT (Slim) A DPDT (Wide) A PDT A BasicRYS-U RYV-U With Indicator RYS-UL RYV-UL With Check Button RYS-UC With Indicator and Check Button RYS-ULC Top Bracket Mounting RYS-UT With Diode (DC coil only) RYS-UD RYV-UD With Indicator and Diode (DC coil only) BasicRMS-U RMV-U With Indicator RMS-UL RMV-UL With Check Button RMS-UC With Indicator and Check Button RMS-ULC Top Bracket Mounting RMS-UT With Diode (DC coil only) RMS-UD With Indicator and Diode (DC coil only) RMS-ULD BasicRYS-U RYV-U With Indicator RYS-UL RYV-UL With Check Button RYS-UC With Indicator and Check Button RYS-ULC Top Bracket Mounting RYS-UT With Diode (DC coil only) RYS-UD With Indicator and Diode (DC coil only) RYS-ULD DPDT (Slim) A Bifurcated BasicRYS-U RYV-U With Indicator RYS-UL RYV-UL Top Bracket Mounting RYS-UT ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DV, DCV, DC0V DCV, DCV, DCV, DCV, DC0V ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V DCV, DCV, DCV, DCV, DC00-0V ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V DCV, DCV, DCV, DCV, DC00-0V ACV, ACV, ACV, AC0V, AC0V, AC0V, AC0V DCV, DCV, DV, DCV, DC0V With Diode (DC coil only) RYS-UD RYV-UD DCV, DCV, DCV, DCV, DC0V PDT A Bifurcated BasicRYS-U RYV-U With Indicator RYS-UL RYV-UL Top Bracket Mounting RYS-UT ACV, ACV, ACV, AC0-0V, AC0-0V DCV, DCV, DCV, DCV, DC00-0V Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RYS-U AC0-0V Part No. Coil Voltage Code Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

42 RY/RM Series Switches & Pilot Lights Sockets Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount RYS RYS RMSMS-0SMS-0CSMS- RYS RYS Through Panel Mount SYS-0SYS-0CSYS-SYS- SYS-0SYS-0CSYS- SYS- SYS- PCB Mount Display Lights Hold Down Springs & Clips Appearance Description Relay For DIN Mount Socket For Through Panel & PCB Mount Socket Min Order Qty RYS RYS SYS-0F SYS-F Pullover Wire Spring Leaf Spring* (side latch) RM RYS RYS RYS, RYS RM, RYS, RYS SYS-F SYS-F SFA-0SFA-0 0 Leaf Spring* (top latch) RYS, RYS RM RYS, RYS SFA-0SFA-0 0 Timers *Not available for PCB mount socket SYS-. Terminal Blocks Accessories Description Appearance Use with Part No. Remarks Aluminum ( meter length) End Stop Replacement Hold-Down Spring Anchor All DIN rail sockets BNDN000 DIN rail BNL. mm wide. Horseshoe clip for all DIN rail sockets Y-0 IDEC offers a low-profile DIN rail (BNDN000). The BNDN000 is designed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN000 measures 0. (0.mm) in height and. (mm) in width (DIN standard). Standard length is (,000mm). For use on DIN rail mount socket when using pullover wire hold down spring. pieces included with each socket. Circuit Breakers

43 RY/RM Series Specifications Contact Model Standard Contact Bifurcated Contact RY - DPDT Slim RM - DPDT Wide RY - PDT RY - DPDT / RY - PDT Contact Material Gold-plated silver Silver Gold-plated silver Silver-palladium alloy Contact Resistance 0 mω maximum 0 mω maximum 0 mω maximum 00 mω minimum Minimum Applicable Load Operate Time Release Time Power Consumption (approx.) Insulation Resistance Dielectric Strength Operating Frequency Vibration Resistance Shock Resistance Mechanical Life V DC, ma; V DC, 0 ma (reference value) AC:. VA (0 Hz), VA (0 Hz) DC: 0.W 00 MΩ minimum (00V DC megger) Electrical: Mechanical: V DC, 0 ma; V DC, 0 ma (reference value) AC:. VA (0 Hz),. VA (0 Hz) DC: 0.W V DC, ma; V DC, 0 ma (reference value) 0 ms maximum 0 ms maximum AC:. VA (0 Hz),. VA (0 Hz) DC: 0.W V DC, 00 μa (reference value) AC:. VA (0 Hz), VA (0 Hz) DC: 0.W Between live and dead parts: 00V AC, minute 000V AC, minute 000V AC, minute 00V AC, minute Between contact and coil: 00V AC, minute 000V AC, minute 000V AC, minute 00V AC, minute Between contacts of different poles: 00V AC, minute 000V AC, minute 000V AC, minute 00V AC, minute Between contacts of the same pole: 000V AC, minute 000V AC, minute 000V AC, minute 000V AC, minute Damage limits: Operating extremes: 00 operations/h maximum,000 operations/h maximum 0 to Hz, amplitude 0. mm 0 to Hz, amplitude 0. mm Damage limits: 000 m/s Operating extremes: 00 m/s (DPDT Slim), 00 m/s (PDT, DPDT Wide) 0,000,000 operations Electrical Life 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) 00,000 operations (0V AC, A) Operating Temperature to + C (no freezing) to + C (no freezing) to + C (no freezing) to + C (no freezing) Operating Humidity to % RH (no condensation) Weight (approx.) g g g RY: g / RY: g Note: Above values are initial values.. Measured using V DC, A voltage drop method. Measured at the rated voltage (at 0 C), excluding contact bouncing Release time of relays with diode: 0 ms maximum. Relays with indicator or diode: 000V AC, minute. For use under different temperature conditions, refer to Continuous Load Current vs. Operating Temperature Curve. The operating temperature range of relays with indicator or diode is to +0 C.. When the total current of contacts is less than A, the operating temperature range is to +0 C. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

44 RY/RM Series Switches & Pilot Lights Display Lights AC Coil Ratings Voltage (V) DPDT Slim Rated Current (ma) ±% at 0 C AC 0Hz DPDT Wide & PDT DPDT Slim AC 0Hz DPDT Wide & PDT Coil Resistance (Ω) ±0% at 0 C DPDT Slim DPDT Wide & PDT , ,0 0..,00 0.., ,0 0..,0 DC Coil Ratings Voltage (V) Rated Current (ma) ±% at 0 C Coil Resistance (Ω) ±0% at 0 C DPDT Slim DPDT Wide & PDT DPDT Slim DPDT Wide & PDT ,0, ,0 0,00 Max. Continuous Applied Voltage Operation Characteristics (against rated values at 0ºC) Max. Continuous Applied Voltage Pickup Voltage 0% 0% maximum Operation Characteristics (against rated values at 0ºC) Pickup Voltage Dropout Voltage 0% 0% maximum 0% minimum Dropout Voltage 0% minimum Timers Terminal Blocks Contact Ratings Contact DPDT Slim (RY) DPDT Wide (RM) PDT (RY) Bifurcated Contact (RY/ RY) Continuous Current A A A A Maximum Contact Capacity Allowable Contact Power Rated Load Resistive Load Inductive Load Voltage (V) Res. Load Ind. Load 0 VA AC 0W DC 00VA AC 0W DC 00 VA AC 0W DC VA AC 0W DC VA AC W DC 0VA AC W DC VA AC 0W DC VA AC W DC Note: Inductive load for the rated load cos ø = 0., L/R = ms 0V AC A.A 0V AC A 0.A 0V DC A.A 0V AC A.A 0V AC A A 0V DC A.A 0V AC A.A 0V DC A A 0V AC A 0.A 0V AC 0.A 0.A 0V DC A 0.A UL Ratings (Standard Contact) Voltage DPDT Slim Resistive DPDT Wide PDT DPDT Slim General use DPDT Wide PDT 0V AC A A A 0.A A A 0V AC.A.A 00V DC 0.A 0.A 0.A 0.A 0.A 0V DC A A A A A CSA Ratings (Standard Contact) Voltage DPDT Slim Resistive DPDT Wide PDT DPDT Slim General use DPDT Wide PDT 0V AC A A A 0.A A A 0V AC A A.A.A 00V DC 0.A 0.A 0.A 0V DC A A A.A.A.A Circuit Breakers TÜV Ratings (Standard Contact) Voltage DPDT Slim DPDT Wide PDT 0V AC A A A 0V DC A A A UL Ratings (Bifurcated Contact) Voltage Resistive General use 0V AC 0.A 0.A 0V AC A 0.A 0V DC A 0.A CSA Ratings (Bifurcated Contact) Voltage Resistive General use 0V AC 0.A 0.A 0V AC A 0.A 0V DC A AC: cos ø =.0, DC: L/R = 0 ms

45 RY/RM Series Socket Specifications Mount Sockets Finger-safe Mount Through Panel Mount Socket PCB Mount Socket Sockets Terminal Electrical Rating Wire Size Torque SYS-0 M screws with captive wire clamp 00V, A Maximum up to #AWG. - in lbs SMS-0 M screw with captive wire clamp 00V, 0A Maximum up to #AWG. - in lbs SYS-0 M screw with captive wire clamp 00V, A* Maximum up to #AWG. - in lbs SYS-0C M screws with captive wire clamp, fingersafe 00V, A Maximum up to #AWG. - in lbs SMS-0C M screw with captive wire clamp, fingersafe 00V, 0A Maximum up to #AWG. - in lbs SYS-0C M screw with captive wire clamp, fingersafe 00V, A* Maximum up to #AWG. - in lbs SYS- Solder 0V, A SMS- Solder 0V, 0A SYS- Solder 0V, A* SYS- PCB Mount 00V, A SYS- PCB Mount 00V, A SYS- PCB Mount 0V, A * When using only poles of the -poles, the UL recognized current is 0A. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

46 RY/RM Series Characteristics (Reference Data) Switches & Pilot Lights Display Lights Electrical Life Curves AC Load (RY) (RY/ RY) Life ( 0,000 operations) V AC resistive 0V AC resistive 0V AC inductive 0V AC inductive (RY) (RM) Life ( 0,000 operations) V AC resistive V AC inductive V AC resistive 0V AC resistive Life ( 0,000 operations) V AC resistive 0V AC resistive 0V AC inductive 0V AC inductive Life ( 0,000 operations) V AC inductive 0V AC inductive 0 0 DC Load (RY) 0V DC resistive (RY) Timers Terminal Blocks Circuit Breakers (RY/ RY) Life ( 0,000 operations) Life ( 0,000 operations) V DC inductive 0 00V DC resistive 00V DC inductive V DC resistive 0V DC inductive 00V DC resistive 00V DC inductive (RM) Life ( 0,000 operations) Life ( 0,000 operations) V DC resistive 00 0V DC inductive V DC resistive 000 0V DC inductive V DC resistive 00V DC inductive 0 0

47 RY/RM Series Maximum Switching Capacity (RY) (RY/ RY) DC inductive AC resistive AC inductive DC resistive Load Voltage (V) DC resistive DC inductive AC resistive AC inductive Load Voltage (V) (RY) (RM) DC resistive DC inductive AC resistive AC inductive Load Voltage (V) DC inductive AC resistive AC inductive DC resistive Load Voltage (V) Continuous Load Current vs. Operating Temperature Curve (Basic Type, With Check Button, and Top Bracket Mounting Type) (RY) Operating Temperature ( C) AC Coil DC Coil (RY) Operating Temperature ( C) AC Coil DC Coil (RM) Operating Temperature ( C) AC Coil DC Coil Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

48 RY/RM Series Switches & Pilot Lights Internal Connection (View from Bottom) Basic Type DPDT Slim (RY/RY) DPDT Wide (RM) PDT (RY/RY) With Check Button ( ) ( + ) ( ) (+) 0 ( ) ( + ) Front Pushbutton Contacts can be operated by pressing the check button. With Indicator (-L type) DPDT Slim (RY/RY) DPDT Wide (RM) PDT (RY/RY) Display Lights Coil Below 00V AC/DC Coil 00V AC/DC and over ( ) (+) ( ) (+) Coil Below V AC/DC Coil V AC/DC and over ( ) (+) ( ) (+) With Diode (-D type) DPDT Slim (RY/RY) DPDT Wide (RM) PDT (RY) 0 ( ) (+) 0 ( ) (+) When the relay is energized, the indicator goes on. The LED protection diode is not contained in DPDT relays for coils below 00V DC. If coil polarity is reversed LED will not light. ( ) (+) ( ) (+) 0 ( ) (+) Contains a diode to absorb the back emf generated when the coil is de-energized. The release time is slightly longer. Diode Characteristics Reverse withstand voltage:,000v Forward current: A Timers With Indicator and Diode (-LD type) DPDT Wide (RM) PDT (RY) DPDT Wide (RM) PDT (RY) Coil Below V DC ( ) (+) 0 ( ) (+) Coil V DC and over ( ) (+) 0 ( ) (+) Contains LED indicator and a surge absorber. Circuit Breakers Terminal Blocks 0

49 RY/RM Series Dimensions (mm). RYS/RYS RYS/RYS RMS Total length from panel surface including relay socket SYS-0:. (.) max., SYS-:. (.) max. ø. oblong hole 0. Dimensions in the ( ) include a hold-down spring... max... Total length from the panel surface including relay socket SYS-0:. (.) max., SYS-:. (.) max.. ø. oblong hole Dimensions in the ( ) include a hold-down spring max.. RYV/RYV RYV/RYV RMV max.. -ø holes ø holes. max.. RYS-UT/RYS-UT RYS-UT/RYS-UT RMS-UT.. ø. oblong hole max ø. oblong hole max Total length from the panel surface including relay socket. SMS-0:. (.) max., SMS-:. (.) max. Dimensions in the ( ) include a hold-down spring. 0.. ø. hole. 0.. max max..... ø. hole max ø hole.... Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

50 RY/RM Series Dimensions Switches & Pilot Lights Standard Mount Sockets SYS-0 0. M Terminal Screw.. (BNDN) -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min. (Top View) SMS M Terminal Screw.. (BNDN). max. -ø. Mounting Holes (or M Tapped Holes) max.. min. ø. min. (Top View) Display Lights 0. SYS-0 0. M Terminal Screw.. (BNDN). max. Finger-safe Mount Sockets SYS-0C -ø. Mounting Holes (or M Tapped Holes) max.. min. ø. min. 0 (Top View) SMS-0C Timers.. 0 M Terminal Screw ø Circuit Breakers. Terminal Blocks.. (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View). 0 ø.. M Terminal Screw.. (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. (Top View) SYS-0C 0 M Terminal Screw. (BNDN) ø. -ø. Mounting Holes (or M Tapped Holes)... Ring terminals cannot be used. 0 (Top View)

51 RY/RM Series Through Panel Mount Socket SYS-. SYS-.. Panel Thickness: to 0... PCB Mount Sockets SYS-. SYS-.. Panel Thickness: to min.. [(N )+.] SMS- (Bottom View) N: No. of sockets mounted. 0. min. when husing hold-down springs. 0 (Bottom View) (Bottom View) 0.. min min. when using hold-down springs min.. 0 (Bottom View) [ (N ) +.] N: No. of sock 0. min. when using hold-do 0... min.. min.... -ø holes (Tolerance ±0.).. SYS-.. Panel Thickness: to (Bottom View) 0 (Bottom View). min... min. when using hold-down springs min [ (N ) +.] 0 N: No. of sockets mo 0. min. when using hold-down sp.... min. -ø holes (Tolerance ±0.) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

52 Operating Instructions Operating Instructions Terminal Blocks Timers Display Lights Switches & Pilot Lights Driving Circuit for Relays. To ensure correct relay operation, apply rated voltage to the relay coil.. Input voltage for the DC coil: A complete DC voltage is best for the coil power to make sure of stable relay operation. When using a power supply containing a ripple voltage, suppress the ripple factor within %. When power is supplied through a rectifi cation circuit, the relay operating characteristics, such as pickup voltage and dropout voltage, depend on the ripple factor. Connect a smoothing capacitor for better operating characteristics as shown below. Smoothing Capacitor + R Relay Pulsation Emin Emax Emean DC Emax Emin Ripple Factor (%) 00% Emean Emax = Maximum of pulsating current Emin = Minimum of pulsating current Emean= DC mean value. Leakage current while relay is off: When driving an element at the same time as the relay operation, special consideration is needed for the circuit design. As shown in the incorrect circuit below, leakage current (Io) fl ows through the relay coil while the relay is off. Leakage current causes coil release failure or adversely affects the vibration resistance and shock resistance. Design a circuit as shown in the correct example. Incorrect R Io TE Correct. Surge suppression for transistor driving circuits: When the relay coil is turned off, a high-voltage pulse is generated, causing a transistor to deteriorate and sometimes to break. Be sure to connect a diode to suppress the back electromotive force. Then, the coil release time becomes slightly longer. To shorten the coil release time, connect a Zener diode between the collector and emitter of the transistor. Select a Zener diode with a Zener voltage slightly higher than the power voltage. Back emf suppressing diode R + R Relay Protection for Relay Contacts. The contact ratings show maximum values. Make sure that these values are not exceeded. When an inrush current fl ows through the load, the contact may become welded. If this is the case, connect a contact protection circuit, such as a current limiting resistor.. Contact protection circuit: When switching an inductive load, arcing causes carbides to form on the contacts, resulting in increased contact resistance. In consideration of contact reliability, contact life, and noise suppression, use of a surge absorbing circuit is recommended. Note that the release time of the load becomes slightly longer. Check the operation using the actual load. Incorrect use of a contact protection circuit will adversely affect switching characteristics. Four typical examples of contact protection circuits are shown in the following table: RC Diode Varistor Power Power + Power Power C R C R D Varistor Ind. Load Ind. Load Ind. Load Ind. Load This protection circuit can be used when the load impedance is smaller than the RC impedance in an AC load power circuit. R: Resistor of approximately the same resistance value as the load C:0. to μf This protection circuit can be used for both AC and DC load power circuits. R: Resistor of approximately the same resistance value as the load C: 0. to μf This protection circuit can be used for DC load power circuits. Use a diode with the following ratings. Reverse withstand voltage: Power voltage of the load circuit x 0 Forward current: More than the load current This protection circuit can be used for both AC and DC load power circuits. For a best result, when using a power voltage of to V AC/DC, connect a varistor across the load. When using a power voltage of 00 to 0V AC/DC, connect a varistor across the contacts.. Do not use a contact protection circuit as shown below: C Power C Power Load Load This protection circuit is very effective in arc suppression when opening the contacts. But, the capacitor is charged while the contacts are opened. When the contacts are closed, the capacitor is discharged through the contacts, increasing the possibility of contact welding. This protection circuit is very effective in arc suppression when opening the contacts. But, when the contacts are closed, a current flows to charge the capacitor, causing contact welding. Generally, switching a DC inductive load is more diffi cult than switching a DC resistive load. Using an appropriate arc suppressor, however, will improve the switching characteristics of a DC inductive load. Soldering Circuit Breakers. When soldering the relay terminals, use a soldering iron of 0 to 0W, and quickly complete soldering (within approximately seconds).. Use a non-corrosive rosin fl ux.

53 Operating Instructions Operating Instructions con t Other Precautions. General notice: To maintain the initial characteristics, do not drop or shock the relay. The relay cover cannot be removed from the base during normal operation. To maintain the initial characteristics, do not remove the relay cover. Use the relay in environments free from condensation, dust, sulfur dioxide (SO ), and hydrogen sulfide (H S). Make sure that the coil voltage does not exceed applicable coil voltage range. Turn off the power to the relay before starting installation, removal, wiring, maintenance, and inspection of the relays. Failure to turn power off may cause electrical shock or fi re hazard. Observe specifications and rated values, otherwise electrical shock or fi re hazard may be caused. Use wires of the proper size to meet voltage and current requirements. Tighten the terminal screws on the relay socket to the proper tightening torque. Surge absorbing elements on AC relays with RC or DC relays with diode are provided to absorb the back electromotive force generated by the coil. When the relay is subject to an excessive external surge voltage, the surge absorbing element may be damaged. Add another surge absorbing provision to the relay to prevent damage. Safety Precautions. UL and CSA ratings may differ from product rated values determined by IDEC.. Do not use relays in the vicinity of strong magnetic fi eld, as this may affect relay operation. Precautions for the RU Relays Before operating the latching lever of the RU relay, turn off the power to the RU relay. After checking the circuit, return the latching lever to the original position. Do not use the latching lever as a switch. The durability of the latching lever is a minimum of 00 operations. When using DC loads on PDT relays, apply a positive voltage to terminals of neighboring poles and a negative voltage to the other terminals of neighboring poles to prevent the possibility of short circuits. DC relays with a diode have a polarity in the coil terminals. Apply the DC voltage to the correct terminals. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

54 RRKP Series RRKP Series Latch Relays Switches & Pilot Lights Self-maintained Latch Relays DPDT 0A contact capacity The RRKP series latch relays have a self-holding function using permanent magnets in the magnetic circuit. Applying a voltage on the set (or reset) coil operates the armature and retains the contacts in that position until the opposite coil is energized, hence the latch relays are ideal for memory and fl ip-fl op circuit applications. Enhanced self-holding functions, and vibration and shock resistance. The self-holding mechanism is not subject to wear unlike mechanical latch relays. Recognized by UL and certified by CSA Display Lights Part Number Selection Part Number Contact Model Pin Terminal Coil Voltage Code DPDT BasicRRKP-U AC, AC, AC, AC0, AC0, AC0, AC0 DC, DC, DC, DC, DC0 With Check Button RRKP-UC Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RRKP-U AC0 Part No. Coil Voltage Code Timers Sockets RRKP Relay Mount Finger-safe Mount Panel Mount SRP-0 SRP-0 SRP-0CSRP- Springs & Clips (optional) Part Number Description SRP-0F SRP-F use with SRP-0 SRP-0C SRP-0 use with SRP- Circuit Breakers Terminal Blocks

55 RRKP Series Specifications Contact Material Silver Contact Resistance 0 mω maximum (initial value) Operate Time ms maximum (at the rated voltage) Power Consumption (approx.) AC:. VA (0 Hz),. VA (0 Hz) DC:.W Insulation Resistance 00 MΩ minimum (00V DC megger) Between live and dead parts:,00v AC, minute Dielectric Strength Between contact and coil:,00v AC, minute Between contacts of different poles:,00v AC, minute Between contacts of the same pole:,000v AC, minute Operating Frequency Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Temperature Rise Coil: C maximum, Contact: C maximum Vibration Resistance 0 to 0 m/s (maximum frequency: Hz), Frequency: to Hz, Amplitude: 0. mm Shock Resistance 00 m/s minimum Mechanical Life,000,000 operations minimum Electrical Life 00,000 operations minimum (0V AC, 0A) Operating Temperature to +0 C (no freezing) Operating Humidity to % RH (no condensation) Weight (approx.) 0g Coil Ratings Rated Current (ma) ±% at 0 C Coil Resistance (Ω) Operation Characteristics (values at 0 C) Rated Voltage (V) 0Hz 0Hz ±0% at 0 C Maximum Continuous Applied Voltage Set and Reset Voltage. AC (0/0Hz) DC Contact Ratings Switching Voltage 0V AC V DC ,00 0, , , ,00 0.,0 Continuous Current 0A Maximum Contact Capacity Allowable Contact Power Resistive Load 0VA AC 00W DC Inductive Load 00VA AC W DC Note: Inductive load for the rated load cos ø = 0., L/R = ms Voltage (V) Rated Load Res. Load Ind. Load 0 AC 0A.A 0 AC.A A 0 DC 0A A 00V DC 0.A 0.A 0% 0% 0% maximum 0% maximum UL Ratings Voltage Resistive General use Motor Load 0V AC 0A A / HP 0V AC 0A.A / HP 0V DC 0A A CSA Ratings Voltage Resistive General use Motor Load 0V AC 0A A / HP 0V AC 0A.A / HP 00V DC 0.A 0V DC 0A.A Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

56 RRKP Series Switches & Pilot Lights Socket Specifications Mount Sockets Through Panel Mount Socket Relays Terminal Electrical Rating Wire Size Torque SRP-0 M screw with captive wire clamp 00V, 0A #AWG -. in lbs SRP-0C M screw with captive wire clamp, fingersafe 00V, 0A #AWG -. in lbs SRP-0 M screw with captive wire clamp 00V, 0A #AWG -. in lbs SRP- Solder 00V, 0A Electrical Life Curve AC Load DC Load Internal Connection (View from Bottom) (Shown in unlatched/reset position) (+) Display Lights Life ( 0,000 operations) V AC resistive 0V AC resistive 0V AC inductive 0V AC inductive Life ( 0,000 operations) V DC resistive 0V DC inductive 00V DC resistive 00V DC inductive ( ) ( ) RESET SET 0 (+) Dimensions (mm) Total length from panel surface including relay socket SRP-0: 0 (0.) max., SRP-:. () max max. Timers Dimensions in the ( ) include a hold-down spring. Standard Mount Sockets SRP-0 M. Terminal Screw (BNDN Types) -ø. Mounting Hole (or M Tapped Holes) SRP-0 M. Terminal Screw. (BNDN) -ø. Mounting Holes (or M Tapped Holes) Terminal Blocks ø. hole ø. 0.. max. min.. max. ø. min. 0 (Top View) 0 ø. hole ø. max. min.. max. ø. min. 0 (Top View) Circuit Breakers Finger-safe Mount Sockets SRP-0C. ø ø. hole.. 0 (BNDN) -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. 0 (Top View) Through Panel Mount Socket SRP- 0. ø Panel Surfarface (Bottom View) ø0 -ø. Mounting Holes (or M Tapped Holes)

57 RYKS Series RYKS Series Latch Relays Self-maintained Latch Relays DPDT A contact capacity The RYKS series latch relays have a self-holding function using permanent magnets in the magnetic circuit. Applying a voltage on the set (or reset) coil operates the armature and retains the contacts in that position until the opposite coil is energized, hence the latch relays are ideal for memory and fl ip-fl op circuit applications. Part Number Selection Part Number Contact Model Blade Terminal Coil Voltage Code DPDT BasicRYKS-U* AC, AC, AC, AC0 DC, DC, DC, DC, DC0 With Check Button RYKS-UC* Sockets Relay Mount Finger-safe Mount RYKSSYS-0SYS-0CSYS- Panel Mount Ordering Information When ordering, specify the Part No. and coil voltage code: (example) RYKS-U AC0 SYS- SYS- PCB Mount Part No. Coil Voltage Code Springs & Clips (optional) Part Number Description SFA-0 SYS-F (SYS-0F) SFA-0 SYS-F SYS-0F use with SYS-0 SYS-0C use with SYS- SYS- use with SYS- Notes:. For the relays with check button, use the parenthesized hold-down springs shown in the above table. When the spring is used, sockets cannot be mounted closely side by side.. Use the hold-down springs in environments where the relays are subject to vibrations or shocks. Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

58 RYKS Series Timers Display Lights Switches & Pilot Lights Specifications Contact Material Contact Resistance Set Time Reset Time Power Consumption (approx.) Insulation Resistance Dielectric Strength Operating Frequency Temperature Rise Vibration Resistance Shock Resistance Mechanical Life Electrical Life Operating Temperature Weight (approx.) Coil Ratings Gold-plated silver 0 mω maximum (initial value) ms maximum (at the rated voltage) ms maximum (at the rated voltage) AC:. VA (0 Hz),. VA (0 Hz) DC:.W 00 MΩ minimum (00V DC megger) Between live and dead parts:,00v AC, minute Between contact and coil:,000v AC, minute Between contacts of different poles:,000v AC, minute Between contacts of the same pole: 00V AC, minute Electrical: 00 operations/h maximum Mechanical:,000 operations/h maximum Coil: C maximum, Contact: C maximum 0 to 0 m/s (maximum frequency: Hz), Frequency: to Hz, Amplitude: 0. mm 00 m/s minimum,000,000 operations minimum 00,000 operations minimum to +0 C (no freezing) g Rated Current (ma) ±% at 0 C Coil Resistance (Ω) Operation Characteristics (values at 0 C) Rated Voltage (V) 0Hz 0Hz ±0% at 0 C Maximum Continuous Applied Voltage Set and Reset Voltage 0 0. AC (0/0Hz) DC , ,0 0 0,000 0% 0% 0% maximum 0% maximum Terminal Blocks Circuit Breakers Contact Ratings Switching Voltage 0V AC V DC Continuous Current A Maximum Contact Capacity Allowable Contact Power Resistive Load 00VA AC 0W DC Inductive Load VA AC W DC Note: Inductive load for the rated load cos ø = 0., L/R = ms Voltage (V) Rated Load Res. Load Ind. Load 0 AC A.A 0 AC A 0.A 0 DC A.A 00V DC 0.A 0.A UL Ratings Voltage Resistive General use 0V AC A 0.A 0V AC A.A 0V DC A CSA Ratings Voltage Resistive General use 0V AC A 0.A 0V AC A.A 0V DC A.A 0

59 RYKS Series Socket Specifications Mount Sockets Through Panel Mount Socket PCB Mount Sockets Sockets Terminal Electrical Rating Wire Size Torque SYS-0 M screw with captive wire clamp 00V, A Maximum up to #AWG. - in lbs SYS-0C M screw with captive wire clamp, fingersafe 00V, A Maximum up to #AWG. - in lbs SYS- Solder 00V, A SYS- Solder/PCB Mount 00V, A SYS- Solder/PCB Mount 0V, A Electrical Life Curve Internal Connection (View from Bottom) AC Load DC Load (Shown in unlatched/reset position) Life ( 0,000 operations) V AC resistive 0V AC resistive 0V AC inductive 0 0V AC inductive 0 Standard Mount Socket SYS M Terminal Screw.. (BNDN) Life ( 0,000 operations) V DC resistive 0V DC inductive 00V DC resistive 0 00V DC inductive 0 Dimensions (mm) Total length from the panel surface including relay socket SYS-0:. (.) max., SYS-:. (.) max. -ø. Mounting Holes (or M Tapped Holes) max.. min.. max. ø. min ø. oblong hole. max.. 0 (Top View) Dimensions in the ( ) include a hold-down spring. 0. Finger-safe Mount Socket SYS-0C. 0. M Terminal Screw ø... (BNDN) ( ) 0 ( + ) ( ) SET ( + ) RESET -ø. Mounting Holes (or M Tapped Holes) Ring terminals cannot be used. 0 (Top View) Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

60 RYKS Series Switches & Pilot Lights Through Panel Mount Socket SYS-. Panel Thickness: to (Bottom View) min. +0. [ (N ) +.] 0 N: No. of sockets mounted.. 0. min. when using hold-down springs Display Lights PCB Mount Sockets SYS (Bottom View) Circuit Breakers Terminal Blocks Timers. min... min. when using hold-down springs min. -ø holes (Tolerance ±0.) SYS (Bottom View) 0... min min. -ø holes (Tolerance ±0.). min. when using a hold-down spring.. min. when using a hold-down spring for the relay with check button

61 RSC Series RSC Series Solid State Relays Key features of the RSC series include: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design Choice of 0A, 0A and A models LED indicator Finger-safe terminals Zero voltage switching Back-to-back SCR output Direct Bond Copper (DBC) substrate construction Built-in transient protection (TVS) 00k-cycle UL0 endurance rating UL Recognized, CSA Certifi ed, TUV Approved, CE Marked Lead free and RoHS compliant EMC (Level ) & IEC compliant UL Recognized File No. E Part Number Selection Specifications -V DC 0-0V AC Input Control Voltage 0-0V AC *Input control voltage is 0-0V AC. Output Current Rating Part Number 0ARSCDN-0A 0A RSCDN-0A A RSCDN-A 0ARSCAN-0A 0A RSCAN-0A A RSCAN-A 0ARSCAN-0A 0A A RSCAN-0A RSCAN-A* General Characteristics Model 0A 0A A -0 to +0 Operating temperature (ºC) -0 to +0 (0-0 V AC input models) Storage temperature (ºC) -0 to +00 Input-to-Output isolation voltage (Vrms) 00 Input/Output to ground isolation voltage (Vrms) 000 Operating frequency (Hz) to Housing material UL-V0 Self-extinguishing polycarbonate Heat sink material Anodized aluminum black Protection (IEC 0) - Casing IP0 Input terminal wire size (stranded and solid) AWG to AWG Input terminal tightening torque (Nm) 0. Output terminal wire size (stranded) AWG to AWG Output terminal wire size (solid) 0 AWG to AWG Output terminal tightening torque (Nm). Weight (g) 00 Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

62 RSC Series Timers Display Lights Switches & Pilot Lights Specifications con t Safety Standards Input Specifications Conformity to standards Model 0A 0A A UL recognized per UL 0 Vibrations according to IEC/ EN00-- mm / 0- Hz Shock test IEC 00-- G / ms Immunity to electrostatic discharges IEC/EN Level Immunity to electrostatic fields ENV 00/0 (IEC 000--) Level Immunity to rapid transient bursts to IEC Level Immunity to shock waves according to IEC/EN Level Immunity to radio frequency in common mode acc. to ENV (CEI Level 000--) Conducted and radiated noise for industrial environments per Class A CISPR Pollution Degree Overvoltage Category III IEC IEC 0-- (AC ) IEC 0-- (AC a) CE compliant with LVD //EEC TUV certified per EN 00 CSA certified per C..no. - Model 0A, 0A, A Input voltage (V) -V DC 0-0V AC 0-0V AC* Turn-off voltage (V) 0 0 Max. controlled current (ma) 0 Min. input current (ma) Turn-on time (ms). (0Hz) / 0 (0Hz) 0 0 Max. turn-off time (ms). (0Hz) / 0 (0Hz) 0 0. LED is not an absolute indicator of power being present.. *A model is 0-0V AC Terminal Blocks Circuit Breakers Output Specifications Model 0A 0A A Voltage range (Vrms max) Non-rep. peak voltage (Vpeak) Maximum off-state leakage at Vmax and T = ºC (μa) Current 0ºC (A) 0 0 Minimum current (ma) On-state voltage drop at I max (Vpeak)... I t (t = 0 ms) (A s) (0/0 Hz) /00 0/0 00/00 Static (off-state) dv/dt (V/μs) HP ratings at 0V / /. HP ratings at 0V HP ratings at 0V Utilization category AC- (A) 0 0 Utilization Category AC- (A) 0 Max. non-rep. s surge (T=ºC) (A) Max. non-rep.-cycle surge (T=ºC) (A)

63 RSC Series Dimensions (mm) 0A/0A Models A Model Switches & Pilot Lights Display Lights Timers Terminal Blocks Circuit Breakers USA: 00--IDEC Canada: --IDEC

64 RSS Series RSS Series DIN Panel Mount Solid State Relays Switches & Pilot Lights Display Lights Key features of the RSS series include: Input status LED Indicator Dual SCR output Direct bond copper substrate Internal transient protection built-in snubber EMC compliant (level ) Photo isolation 00 volt blocking voltage 000 volt optical isolation Zero voltage turn-on High surge capability Optional fingersafe terminal cover (RSS-CVR) UL Recognized File No. E Part Number Selection Specifications AC Input 0-0V AC Input Continuous Output Current Part Number 0ARSSAN-0A A RSSAN-A 0A RSSAN-0A A RSSAN-A 0A RSSAN-0A 0ARSSDN-0A Input Specifications Series RSSDN RSSAN Voltage Range to V DC 0 to 0V AC Input Current current regulated (0mA) Pick Up Voltage V DC 0V AC Drop Out Voltage V DC 0V AC Dielectric Strength (Input-Output-Base) 000 RMS (min) 000 RMS (min) Capacitance (Input to Output) pf pf DC Input -V DC A 0A RSSDN-A RSSDN-0A Rev. Voltage Protection Yes ( VDC) N/A Current (continuous) 0A A 0A A 0A Timers A 0A RSSDN-A RSSDN-0A -Cycle Surge Current 0A 00A 0A 000A 00A -Second Surge Current 0A A 0A A 00A Minimum Holding Current 0mA 0mA 00mA 00mA 00mA Voltage Drop at Rated Current Terminal Blocks Circuit Breakers.V (maximum) Output Specifications Voltage Range Output Over Voltage Rating Frequency Range Off-State Leakage at Rated Voltage Turn-On Time Turn-Off Time Zero Voltage Switching - 0V AC Dual SCR (N.O.) 00 PIV to 0Hz 0mA (maximum) / 0Hz / 0Hz Yes Static DV/DT 00V/μsec Commutating DV/DT Snubbed for 0. power factor at rated load Weight 0g (approx.)