ESDARF01-1BF4. ESD protection for AM and FM antenna. Features. Applications. Description. Complies with the following standards
|
|
- Hillary Walker
- 6 years ago
- Views:
Transcription
1 ESD protection for AM and FM antenna Datasheet production data Features Single line bidirectional protection Very low capacitance (1.2 pf max) Lead-free package Very low capacitance, line to ground, for optimized data integrity Low PCB space consumption: 0.18 mm 2 max No insertion loss in AM and FM band High reliability offered by monolithic integration Complies with the following standards IEC : 15 kv (air discharge) 8 kv (contact discharge) MIL STD 883G- Method : class 3B Applications Where transient over voltage protection in ESD sensitive equipment is required, such as: Portable audio systems Communication systems Cellular phone handsets and accessories Audio and video equipment Description The is a monolithic application specific device dedicated to ESD protection of the AM and FM antenna in cell phones and portable equipment. The device is ideal for applications where both reduced printed circuit board space and power absorption capability are required. Figure Flip Chip Functional diagram January 2013 Doc ID Rev1 1/13 This is information on a product in full production. 13
2 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameter Value Unit V PP (1) Peak pulse voltage IEC contact discharge IEC air discharge T j Maximum operating junction temperature 125 C T stg Storage temperature range - 55 to +150 C T L Maximum lead temperature for soldering during 10 s at 5 mm for case 260 C 1. For a surge greater than the maximum values, the diode will fail in short-circuit kv Figure 2. Electrical characteristics (definitions) Symbol Parameter V BR = Breakdown voltage V RM = Stand-off voltage V CL = Clamping voltage I RM = Leakage VRM I = Peak pulse current PP V CL V BR V RM I I RM V V RM V BR V CL Slope: 1/R d I PP Table 2. Electrical characteristics (values, T amb = 25 C) Symbol Parameter Test conditions Value Min. Typ. Max. Unit V BR Breakdown voltage I R = 1 ma V I RM Leakage Current V RM = 100 mv 50 na C i/o-gnd Capacitance between I/O and GND V R = 0 V, F = 1 MHz, any I/O pin to GND 1.2 pf 2/13 Doc ID Rev1
3 Characteristics Figure 3. Dynamical resistance measurements Figure 4. S21 attenuation measurements (50 / 50 ) I PP (A ) Reverse Forward 0 S/dB -1 db V CL (V) F (Hz) k 1M 10M 100M 1G 10G f/hz Figure 5. ESD response to IEC (+8 kv contact discharge) 20 V/div Figure 6. ESD response to IEC (-8 kv contact discharge) 20 V/div V 1 V CL: Peak clamping voltage 2 V CL :clamping voltage at 30 ns 3 V CL :clamping voltage at 60 ns 4 V :clamping voltage at 100 ns CL 3-5 V V V V V V 1 V CL: Peak clamping voltage 2 V CL :clamping voltage at 30 ns 3 V CL :clamping voltage at 60 ns 4 V :clamping voltage at 100 ns CL V 20 ns/div 20 ns/div Doc ID Rev1 3/13
4 Characteristics Figure 7. Junction capacitance versus reverse applied voltage (typical values) 1.0 C (pf) 0.8 F=1 MHz V R =0 to 300mV V osc =30mV RMS T j =25 C Direct / Reverse V R (V) 0.1 Figure 8. Junction capacitance versus frequency (typical values) C (pf) F = 1 MHz to 3 GHz V osc = 30 mv RMS T j = 25 C Direct / Reverse F (MHz) /13 Doc ID Rev1
5 Application schematics 2 Application schematics Figure 9. Application schematics When the reference of earpieces (audio amplifier) is different from 0 V To reference of earpieces (audio amplifier) 100 nf 270 nh To bottom connector, reference of the earpieces and FM antenna To FM RF input of the FM module FM Receiver When the reference of earpieces (audio amplifier) is 0 V 270 nh To bottom connector, reference of the earpieces and FM antenna To FM RF input of the FM module FM Receiver Whatever the reference of earpieces (audio amplifier) To reference of earpieces (audio amplifier) 100 nf 270 nh To bottom connector, reference of the earpieces and FM antenna To FM RF input of the FM module FM Receiver Doc ID Rev1 5/13
6 Ordering information scheme 3 Ordering information scheme Figure 10. Ordering information scheme ESDA RF 01-1B F4 ESD protection device Application RF Antenna Number of lines Directional B = Bi-directional Package F4 = 0201 Flip Chip 6/13 Doc ID Rev1
7 Package information 4 Package information Epoxy meets UL94, V0 Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. Figure Flip Chip dimension definitions D Top view A E Side view b1 b b2 L1 L2 e Bottom view Table Flip Chip dimension values Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A b b b D e E L L Doc ID Rev1 7/13
8 Package information Figure 12. Marking Pin1 R Pin2 Note: The marking codes can be rotated by 90 or 180 to differentiate assembly location.in no case should this product marking be used to orient the component for its placement on a PCB. Only pin 1 mark is to be used for this purpose. Figure 13. Tape and reel specification 2.0 ± ± 0.1 Ø 1.5 ± ± ± ± ± ± ± ± 0.05 All dimensions in mm User direction of unreeling 8/13 Doc ID Rev1
9 Recommendation on PCB assembly 5 Recommendation on PCB assembly 5.1 Stencil opening design 1. General recommendation on stencil opening design a) Stencil opening dimensions: L (Length), W (Width), T (Thickness). Figure 14. Stencil opening dimensions L T W b) General design rule Stencil thickness (T) = 75 ~ 125 µm W Aspect Ratio = T Aspect Area L W = T L + W Reference design a) Stencil opening thickness: 100 µm b) Stencil opening for leads: Opening to footprint ratio is 60% to 75%. Figure 15. Recommended stencil window position 250 µm 350 µm 25 µm 300 µm 240 µm X 250 µm 190 µm 110 µm 200 µm Solder opening Solder lands X: From 50 to 120 µm, depend s on PCB supplier capability Sencil opening Doc ID Rev1 9/13
10 Recommendation on PCB assembly 5.2 Solder paste 1. Use halide-free flux, qualification ROL0 according to ANSI/J-STD No clean solder paste recommended. 3. Offers a high tack force to resist component displacement during PCB movement. 4. Use solder paste with fine particles: powder particle size µm. 5.3 Placement 1. Manual positioning is not recommended. 2. It is recommended to use the lead recognition capabilities of the placement system, not the outline centering. 3. Standard tolerance of ± 0.05 mm is recommended N placement force is recommended. Too much placement force can lead to squeezed out solder paste and cause solder joints to short. Too low placement force can lead to insufficient contact between package and solder paste that could cause open solder joints or badly centered packages. 5. To improve the package placement accuracy, a bottom side optical control should be performed with a high resolution tool. 6. For assembly, a perfect supporting of the PCB (all the more on flexible PCB) is recommended during solder paste printing, pick and place and reflow soldering by using optimized tools. 5.4 PCB design preference 1. To control the solder paste amount, the closed via is recommended instead of open vias. 2. The position of tracks and open vias in the solder area should be well balanced. The symmetrical layout is recommended, in case any tilt phenomena caused by asymmetrical solder paste amount due to the solder flow away. 10/13 Doc ID Rev1
11 Recommendation on PCB assembly 5.5 Reflow profile Figure 16. ST ECOPACK recommended soldering reflow profile for PCB mounting 250 Temperature ( C) 2-3 C/s C -2 C/s sec (90 max) -3 C/s C/s C/s Time (s) Note: Minimize air convection currents in the reflow oven to avoid component movement. Doc ID Rev1 11/13
12 Ordering information 6 Ordering information Table 4. Ordering information Order code Marking Package Weight Base qty Delivery mode R 0201 Flip Chip mg Tape and reel 7 Revision history Table 5. Document revision history Date Revision Changes 16-Jan First issue 12/13 Doc ID Rev1
13 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America Doc ID Rev1 13/13
USBULC6-2N4. Ultralow capacitance ESD protection for high speed interface. Features. Applications. Description. Benefits
Ultralow capacitance ESD protection for high speed interface Features 2-line TVS diodes Ultralow capacitance 0.6 pf typ. 1.0 x 0.8 mm package 0.4 mm pitch Lead-free package Benefits Flow-through layout
More informationESDA5-1BF4. Low clamping single line bidirectional ESD protection. Features. Applications. Description. Complies with the following standards
ESDA-1BF4 Low clamping single line bidirectional ESD protection Features Datasheet - production data Low clamping voltage: 11 V (IEC 600-4-2 contact discharge 8 kv at 30 ns) Bidirectional device Low leakage
More informationESDARF01-1BM2. ESD protection for AM and FM antenna. Features. Applications. Description. Complies with the following standards
ES protection for AM and FM antenna atasheet production data Features Single line bidirectional protection Very low capacitance (3 pf typical) Lead-free package Very low capacitance, line to ground, for
More informationESDA-1K. EOS and ESD Transil protection for charger and battery port. Features. Description. Applications. Benefits
EOS and ESD Transil protection for charger and battery port Features Breakdown voltage: 12 V, 18 V Unidirectional device High peak power dissipation: 450 W (8/20 µs waveform) ESD protection level better
More informationESDAULC6-1U2. Single-line unidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line unidirectional ESD protection for high speed interface Features Datasheet production data Unidirectional device Ultralow diode capacitance: 0.8 pf Low leakage current 0201 SMD package size
More informationESDAVLC6V1-1BM2 ESDAVLC6V1-1BT2
ESDAVLC6V1-1BM2 ESDAVLC6V1-1BT2 Single line low capacitance Transil for ESD protection Features single line bidirectional protection breakdown voltage V BR = 6.1 V min. very low capacitance (6 pf typ.
More informationESDAVLC8-1BM2, ESDAVLC8-1BT2
Features Single-line low capacitance Transil, transient surge voltage suppressor (TVS) for ESD protection Single-line bidirectional protection Breakdown voltage = 8.5 V min. Very low capacitance = 4.5
More informationESDAVLC6-1V2. Single line low capacitance Transil for ESD protection. Description. Features. Applications. Complies with following standards:
Single line low capacitance Transil for ESD protection Description Datasheet production data Features Ultra small PCB area = 0.09 mm² Unidirectional device Very low diode capacitance Low leakage current
More informationESDALCL6-4P6A. Multi-line low capacitance and low leakage current ESD protection. Features. Applications. Description
Multi-line low capacitance and low leakage current ESD protection Features Datasheet production data Diode array topology: 4 lines protection Low leakage current: 10 na at 3 V 1 na at 1 V Very low diode
More informationESDALY. Automotive dual Transil array for ESD protection. Features. Description. Applications. Benefits. Complies with the following standards
Automotive dual Transil array for ESD protection Features Dual unidirectional Transil functions 3 Low leakage current: I R max. < 20 µa at V BR 300 W peak pulse power (8/20 µs) Benefits High ESD protection
More informationESDA6V1M6, ESDA6V1-5M6 4- and 5-line Transil arrays for ESD protection Features Description Applications Micro QFN package
4- and 5-line Transil arrays for ESD protection Features High ESD protection level High integration Suitable for high density boards 4 unidirectional Transil diodes (ESDA6V1M6) 5 unidirectional Transil
More informationESDAVLC6-1BV2. Single line low capacitance Transil for ESD protection. Features. Applications. Pin1. Description
Single line low capacitance Transil for ESD protection Features Datasheet production data PCB area: 0.0 mm² Bidirectional device Low capacitance: 8 pf max. Minimum breakdown voltage BR = 6 Low leakage
More informationEMIF08-LCD04M16. 8-line L-C IPAD, EMI filter and ESD protection in Micro QFN. Features. Description. Applications
8-line L-C IPAD, EMI filter and ESD protection in Micro QFN Features High cut off frequency low-pass filter: F C = 400 MHz at -6 db High efficiency in EMI filtering: better than -35 db from 900 MHz to
More informationAutomotive single-line low capacitance Transil, transient surge voltage suppressor (TVS) for ESD protection. Description
Automotive single-line low capacitance Transil, transient surge voltage suppressor (TVS) for ESD protection Applications Datasheet production data Where transient overvoltage protection in ESD sensitive
More informationESDALC14V2-1U2. Single-line low capacitance Transil for ESD protection. Features. Applications. Description. Benefits
Single-line low capacitance Transil for ESD protection Features Breakdown voltage V BR = 14.2 V min. Unidirectional device Multiple ESD strike sustainability Very low diode capacitance: 6 pf typ. at 0
More informationBAT30F4 Datasheet production data Features Description 0201 package Figure 1. Pin configuration and marking Table 1. Device summary Symbol Value
Small signal Schottky diodes Features Very low conduction losses Negligible switching losses 0201 package Low capacitance diode Description Datasheet production data 0201 package Figure 1. Pin configuration
More informationESDARF03-1BF3. Ultralow capacitance ESD protection for antenna. Features. Applications. Description. Benefits. Complies with the following standards
Ultralow capacitance ESD protection for antenna Features ultralow diode capacitance 0.6 pf Single line, protected against 15 kv ESD breakdown voltage V BR = 6.0 V min. Flip Chip 400 µm pitch, lead-free
More informationHSP line ESD protection for high speed lines. Applications. Description. Features. Complies with following standards.
2-line ESD protection for high speed lines Datasheet - production data Complies with following standards MIL-STD 883G Method 3015-7 Class 3B: 8 kv IEC 61000-4-2 level 4: 15 kv (air discharge) 8 kv (contact
More informationESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line bidirectional ESD protection for high speed interface Features Datasheet production data Bidirectional device Extra low diode capacitance: 0.2 pf Low leakage current 0201 SMD package size compatible
More informationEMIF04-EAR02M8. 4-line IPAD EMI filter and ESD protection for headset. Features. Application. Description. Complies with following standards:
4-line IPAD EMI filter and ESD protection for headset Features lead-free package high attenuation: -3 db at 9 MHz low cut-off frequencies: 6 MHz for speaker lines high current capability: 5 ma per line
More informationHSP061-4M10Y. Automotive 4-line ESD protection for high speed lines. Applications. Features. Description. Benefits. Complies with following standards
Automotive 4-line ESD protection for high speed lines ISO 7637-3: pulse 3a: -150 V pulse 3b: +100 V Applications Datasheet - production data Features Flow-through routing to keep signal integrity Ultralarge
More informationEMIF02-SPK03F2. 2-channel EMI filter and ESD protection for speaker phone. Features. Application. Description. Complies with the following standards
2-channel EMI filter and ESD protection for speaker phone Datasheet production data Features 2-channel EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: S21 attenuation, -40 db at
More informationObsolete Product(s) - Obsolete Product(s)
Ultra low capacitance ESD protection for enhanced mini USB interface Features Diode array topology D+/D- and ID lines protection with 6.8 V low voltage diodes (LV) V BUS line protection with 14.6 V high
More informationESD051-1BF4. 5 V low clamping single line bidirectional ESD protection. Datasheet. Features. Application. Description
Datasheet 5 V low clamping single line bidirectional ESD protection Features ST0201 package Low clamping voltage: 11 V (IEC 61000-4-2 contact discharge at 30 ns) Bidirectional diode Low leakage current
More informationESDALC5-4BN4. 4-line bidirectional Transil, transient voltage surge suppressor for ESD protection. Features. Applications.
ESDAC5-4BN4 4-line bidirectional Transil, transient voltage surge suppressor for ESD protection Datasheet production data Features 4 bidirectional Transil diodes Breakdown voltage V BR = 5.5 V min. ow
More informationESDALC6V1-5P6. ESD protection for high speed interface. Features. Applications. Description. Benefits Low capacitance uni-directional ESD protection.
ESDALC6V1-5P6 ESD protection for high speed interface Features Diode array topology Low capacitance (12 pf typical) Lead-free package Benefits Low capacitance uni-directional ESD protection. Low PCB space
More informationESDALC6-4N4. ESD array with low capacitance. Features. Applications. Description. Benefits. Complies with the following standards
ESD array with low capacitance Datasheet production data Features Stand-off voltage 7 V Very low capacitance: 9.5 pf Small package: 1.0 x 0.8 mm Very thin package: 0.40 mm max Low leakage current: 70 na
More informationESD051-1F4. Low clamping single line unidirectional ESD. Datasheet. Features. Application. Description
Datasheet Low clamping single line unidirectional ESD Features ST0201 package Low clamping voltage: -3 V / +9 V (IEC 61000-4-2 contact discharge at 30 ns) Unidirectional diode Low leakage current 0201
More informationLFTVS18-1F3. Low forward voltage Transil, transient voltage suppressor. Features. Description. Complies with the following standards:
Low forward voltage Transil, transient voltage suppressor Features Strong ESD and EOS protection Datasheet production data Very low clamping factor V CL /V BR Unidirectional device Fast response time Very
More informationEMIF03-SIM05F3. EMI filter with SWP protection for SIM interface. Features. Application. Description. Complies with the following standards:
EMIF0-SIM05F EMI filter with SWP protection for SIM interface Datasheet production data Features Lead-free package Very low PCB space consumption Very thin package: < 0.55 mm after reflow High efficiency
More informationEMIF04-1K030F3. 4-line IPAD, EMI filter including ESD protection. Features. Application. Description. Complies with the following standards:
4-line IPAD, EMI filter including ESD protection Features Datasheet production data Flip-Chip package (9 bumps) Figure 1. Pin configuration (bump side) 4-line EMI symmetrical (I/O) low-pass filter High
More informationESDALC6V1-5M6. 5-line low capacitance Transil arrays for ESD protection ESDALC6V1-5M6. Applications. Description. Features
5-line low capacitance Transil arrays for ESD protection Applications Datasheet - production data Where transient overvoltage protection in ESD sensitive equipment is required, such as: Micro QFN package
More informationDPIULC6. ESD protection for internal DisplayPort. Features. Description. Complies with the following standards
ESD protection for internal DisplayPort Features Compliant with DisplayPort 1.1a IEC 61000-4-2 level 4 compliant Ultralarge bandwidth (> 5 GHz) Low capacitance variation: 0.05 pf 100 Ω ± 10% differential
More informationESDA14V2-1BF3. Single-line bidirectional Transil array for ESD protection. Features. Applications. Description. Complies with the following standards
Single-line bidirectional Transil array for ESD protection Features ESD Protection: IEC61000-4-2 level 4 Low leakage current Very small PCB area < 0.4 mm² 400 micron pitch Complies with the following standards
More informationEMIF01-SMIC01F2. Single line IPAD, EMI filter including ESD protection. Features. Application. Description. Complies with the following standards
Single line IPAD, EMI filter including ESD protection Features High density capacitor 1 line low-pass-filter Lead-free package High efficiency in EMI filtering Very low PCB space consumtion Very thin package:
More informationObsolete Product(s) - Obsolete Product(s)
Single line low capacitance Transil for ESD protection Features single line low capacitance Transil diode bidirectional ESD protection ESD protection > 30 kv (IEC 61000-4-2 contact discharge) breakdown
More informationESDAxxxP6 ASD. Transil array for ESD protection. Main applications. Order codes. Features. Description. Benefits
ASD Transil array for ESD protection Main applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Servers Printers Communication systems and cellular
More informationCBTVS2A12-1F3. Circuit breaker with transient voltage suppressor. Features. Description. Complies with the following standards:
Circuit breaker with transient voltage suppressor Features Datasheet - production data Flip Chip (4 bumps) Figure 1. Pin configuration (bump side) A B 1 Transient voltage suppressor (TVS) Non-resettable
More informationObsolete Product(s) - Obsolete Product(s)
EMIF06-MSD03F3 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features EMI low-pass filter ESD protection ±15 kv (IEC 61000-4-2) Integrated pull up resistors to prevent
More informationEMIF06-MSD03F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application. Description.
EMIF06-MSD03F3 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features EMI low-pass filter ESD protection ±15 kv (IEC 61000-4-2) Integrated pull up resistors to prevent
More informationESDA24P140-1U3M. High power transient voltage suppressor. Datasheet. Features. Application. Description
Datasheet High power transient voltage suppressor Features Pin # ID 2 Top view Pin 3 bus (bus pin) 3 3 Bottom view 2 Pin, 2* GND (ground pin) *Pin and Pin 2 must be connected together. Low clamping voltage
More informationETP01-xx21 Protection for Ethernet lines Features Description Applications Benefits Complies with the following standards
Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved resin
More information2-line IPAD, ultra low capacitance protection for high speed USB
2-line IPAD, ultra low capacitance protection for high speed USB Features Ultra low diode capacitance (1.2 pf max) Two data lines (D+ and D-) protected against 15 kv ESD Breakdown voltage V BR = 6.0 V
More information1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional
1N5908 SM5908 Transil Features Peak pulse power: 1500 W (10/1000 μs) Stand off voltage: 5 V Unidirectional A A Operating T jmax : 175 C High power capability at T jmax : 1500 W (10/1000 µs) JEDEC registered
More informationEMIF03-SIM02F3. 3-line IPAD, EMI filter including ESD protection. Features. Applications. Description. Complies with the following standards
3-line IPAD, EMI filter including ESD protection Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Lead-free package Very low PCB space consuming: 1.2 mm 2 Very thin package:
More informationESDA18-1F2. Transil, transient voltage suppressor. Features. Description. Complies with the following standards A 1
Transil, transient voltage suppressor Features Stand-off voltage 16V Unidirectional device Low clamping factor V CL /V BR Fast response time Very thin package: 0.65 mm Complies with the following standards
More informationCPL-WB-02D3. Wide-band, directional coupler with integrated 50 ohm loaded isolated port. Features. Applications. Description.
CPL-WB-02D3 Wide-band, directional coupler with integrated 50 ohm loaded isolated port Datasheet production data Features 50 Ω nominal input / output impedance Wide operating frequency range (2400 MHz
More informationDSL03. Secondary protection for VDSL2 lines. Description. Features. Complies with the following standards
Secondary protection for VDSL2 lines Description Datasheet - production data Features SOT23-6L High surge capability to comply with GR-1089 and ITU-T K20/21 Voltages: 10, 22 and 24 V Low capacitance device:
More informationSTIEC45-XXAS. Transil for IEC compliance. Features. Description. Complies with the following standards
Transil for IEC 61000-4-5 compliance Features Peak pulse current: 500 A (8/20 μs, 1.2/50 µs) Stand off voltage range: from 24 to 33 Unidirectional types Low leakage current 0.2 µa at 25 C 1 µa at 85 C
More informationGND IEC level 4 15 kv (air discharge) 8 kv (contact discharge) I/O5 MIL STD 883G- Method : class 3B 25 kv (human body model)
Transil array for data line protection Features High surge capability Transil array: I PP = 40 A (8/20 µs) Peak pulse power : 300 W (8/20 µs) Up to 6 bidirectional Transil functions Low clamping factor
More informationESDZL5-1F4. Low clamping, low capacitance unidirectional single line ESD protection. Description. Features. Applications.
Low clamping, low capacitance unidirectional single line ESD protection Datasheet - production data Description The is a unidirectional single line TS diode designed to protect data lines or other I/O
More informationBAT30F4. Small signal Schottky diodes. Description. Features
Small signal Schottky diodes Description Datasheet production data The BAT30F4 uses 30 V Schottky barrier diodes in a 0201 package. This device is intended to be used in smartphones, and is especially
More informationESDA15P60-1U1M. High power transient voltage suppressor
Pin1 Pin2 High power transient voltage suppressor Datasheet - production data Pin2 Pin1 Description The is an unidirectional single line TVS diode designed to protect the power line against EOS and ESD
More informationCPL-WB-00C2. Wide band directional coupler with ISO port. Features. Applications. Description. Benefits
Wide band directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range (824 MHz to 2170 MHz) Low Insertion Loss (< 0.2 db) 34 db typical coupling factor
More informationLow clamping and low capacitance bidirectional single line ESD protection
Low clamping and low capacitance bidirectional single line ESD protection Datasheet - production data Description The ESDAL5-1BF4 is a bidirectional single line TVS diode designed to protect the data line
More informationSMM4F12AVCL. 400 W low clamping voltage Transil. Features. Description. Complies with the following standards
400 W low clamping voltage Transil Features Typical peak pulse power: 400 W (10/1000 µs) 2.4 kw (8/20 µs) Stand off voltage: 12 V Unidirectional type Low clamping factor Low leakage current: 0.2 µa at
More informationSMA6F. High junction temperature Transil. Features. Description. Complies with the following standards
High junction temperature Transil Features ECOPACK 2 compliant product Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Stand off voltage: 5, 12 or 13 V Unidirectional type Low clamping voltage versus
More informationEMIF10-COM01F2. 10-line IPAD, EMI filter including ESD protection. Features. Applications. Description. Complies with the following standard:
10-line IPAD, EMI filter including ESD protection Features EMI symmetrical (I/O) low-pass filter Lead free package Very low PCB space consuming: < 6 mm 2 Very thin package: 0.65 mm High efficiency in ESD
More informationDCPL-WB-02D3. Wide-band, dual-path directional coupler with integrated 50 ohm loaded isolated port. Features. Applications. Description.
Wide-band, dual-path directional coupler with integrated 50 ohm loaded isolated port Datasheet production data Features 50 Ω nominal input / output impedance Wide operating frequency range: 2400 MHz-5850
More informationSTPSC V power Schottky silicon carbide diode. Features. Description
600 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC
More informationEMIF06-HSD03F3 Datasheet production data Features Flip-Chip package (17 bumps) Figure 1. Pin configuration (bump side)
EMI filter with integrated ESD protection for micro-sd Card Features Datasheet production data Flip-Chip package ( 17 bumps) Figure 1. Pin configuration (bump side) I1 O1 Vcc I2 O2 I3 O3 I4 O4 I5 O5 I6
More informationCPL-WB-01D3. Wide-band directional coupler with ISO port. Features. Applications. Description. Benefits
Wide-band directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range (824 MHz to 2170 MHz) Low insertion loss (< 0.2 db) 26 db coupling factor High
More informationESDAxxSCxY. Automotive quad-line Transil transient voltage suppressor (TVS) for ESD protection. Applications. Description. Features.
Automotive quad-line Transil transient voltage suppressor (TVS) for ESD protection Applications Datasheet - production data Where ESD and EOS transient overvoltage protection in susceptible equipment is
More information1.5KE. Transil. Features. Description
Transil Datasheet production data Features Peak pulse power: 1500 W (/0 µs) Breakdown voltage range: From 6.8 V to 440 V Uni and bidirectional types Low clamping factor Fast response time UL 497B file
More informationECMF2-0730V12M12. Common mode filter with ESD protection for USB2.0 interface. Applications. Description. Features. Complies with following standards
Common mode filter with ESD protection for USB2.0 interface Datasheet - production data V BUS high power TVS diode: V RM = 13.2 V I PP (8/20 µs): 70 A Very low PCB space consumption Thin package: 0.55
More informationDCPL-WB-00D3. Wide-band, dual-path directional coupler with ISO port. Features. Description. Applications. Benefits
Wide-band, dual-path directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range: 824 MHz-2170 MHz Low insertion loss (< 0.2 db) High directivity (>
More informationSMTYF. Low forward voltage TVS Transky. Features. Description. Complies with the following standards:
Low forward voltage TVS Transky Features High peak pulse power: 600 W (10/1000 µs) 4000 W (8/20 µs) Stand-off voltage 5 or 12 V Low forward voltage: 0.48 V @ 0.85 A @ 25 C K A Low clamping factor V CL
More informationECMF02-2BF3. Dual line IPAD, common mode filter with ESD protection for high speed serial interface. Description. Features.
Dual line IPAD, common mode filter with ESD protection for high speed serial interface Description Datasheet - production data The ECMF02-2BF3 is a highly integrated common mode filter designed to suppress
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationBAT48 Series. Small signal Schottky diodes. Main product characteristics. Features and benefits. Order codes. Description. BAT48ZFILM (Single) SOD-123
Small signal Schottky diodes Main product characteristics I F V RRM C (typ) T j (max) 350 ma 40 V 18 pf 150 C SOD-123 BAT48ZFILM (Single) Features and benefits Low leakage current losses Negligible switching
More informationSMA4F. High junction temperature Transil. Features. Description. Complies with the following standards
High junction temperature Transil Features ECOPACK2 halogen-free component Peak pulse power: 400 W (10/1000 µs) 3 kw (8/20 µs) Stand off voltage: 5 V Unidirectional type Low clamping voltage versus standard
More informationSTPS30H60-Y. Automotive power Schottky rectifier. Features. Description
Automotive power Schottky rectifier Datasheet production data Features High junction temperature capability Avalanche rated Low leakage current Good trade-off between leakage current and forward voltage
More informationTPN3021. Tripolar overvoltage protection for network interfaces. Features. Applications. Description. Benefits
TPN321 Tripolar overvoltage protection for network interfaces Features Triple crowbar protection Low capacitance Low holding current: I H = 3 ma minimum Surge current: I PP = 2 A, 2/1 µs I PP = 3 A, 1/1
More informationEMIF10-COM01C2 IPAD. EMI Filter including ESD protection. Main product characteristics. Description. Order code. Benefits
IPAD EMI Filter including ESD protection Main product characteristics EMI filtering and ESD protection for: Computers and printers Communication systems Mobile phones Description The is a highly integrated
More informationSTTH200W06TV1. Turbo 2 ultrafast high voltage rectifier. Features. Description
Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching and conduction losses Insulated package
More informationSTPS140Z-Y. Automotive power Schottky rectifier. Features. Description
Automotive power Schottky rectifier Datasheet production data Features Very small conduction losses Negligible switching losses Extremely fast switching ECOPACK 2 compliant component AEC-Q101 qualified
More informationESDAL. Dual Transil array for ESD protection
Dual Transil array for ESD protection Datasheet - production data Applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Entertainment Signal communications
More informationObsolete Product(s) - Obsolete Product(s)
6 V power Schottky silicon carbide diode Features No or negligible reverse recovery Switching behavior independent of temperature Particularly suitable in PFC boost diode function Description The SiC diode
More informationObsolete Product(s) - Obsolete Product(s)
Low forward voltage TVS: Transky Main applications Power rail ESD transient over-voltages and reverse voltages protection for 5 and 12 V supplied IC s Description The Transky is designed specifically for
More informationEVAL-RHF310V1. EVAL-RHF310V1 evaluation board. Features. Description
evaluation board Data brief Features Mounted Engineering Model RHF310K1: Rad-hard, 120 MHz, operational amplifier (see RHF310 datasheet for further information) Mounted components (ready-to-use) Material:
More informationESDLIN03-1BWY. Automotive single-line Transil, transient voltage suppressor (TVS) for LIN bus. Application. Description. Features
Automotive single-line Transil, transient voltage suppressor (TVS) for LIN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω ±30 kv (air discharge)
More informationSTTH60W03C. Turbo 2 ultrafast high voltage rectifier. Features. Description
STTH6W3C Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses ECOPACK 2 compliant
More informationEMIF02-USB03F2. 2-line IPAD, EMI filter including ESD protection. Features. Application. Description. Complies with the following standards
2-line IPAD, EMI filter including ESD protection Features 2-line, low-pass filter + 2-line ESD protection High efficiency in EMI filtering Lead-free package Very low PCB space occupation: < 2.80 mm 2 Very
More informationESDCAN01-2BLY, ESDCAN24-2BLY
ESDCAN01-2BLY, ESDCAN24-2BLY Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Application Datasheet - production data Automotive controller area network (CAN) bus lines where
More informationSTTH200W03TV1. Turbo 2 ultrafast high voltage rectifier. Features. Description
Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching and conduction losses Insulated package
More informationSTTH1210-Y. Automotive ultrafast recovery - high voltage diode. Features. Description
Automotive ultrafast recovery - high voltage diode Datasheet production data Features AEC-Q1 qualified Ultrafast, soft recovery Very low conduction and switching losses High frequency and high pulsed current
More informationSPT02-236DDB. Automation sensor transient and overvoltage protection. Applications. Description. Features. Complies with following standards.
Automation sensor transient and overvoltage protection Applications Datasheet production data Features µqfn-2l Double diode array for switch protection and reverse blocking protection 6 V to 36 V supply
More informationSTTH30W03C. Turbo 2 ultrafast high voltage rectifier. Features. Description
Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses ECOPACK 2 compliant component
More information2STD1665. Low voltage fast-switching NPN power transistor. Features. Applications. Description
Low voltage fast-switching NPN power transistor Features Very low collector to emitter saturation voltage High current gain characteristic TAB Fast-switching speed Applications Voltage regulators High
More informationSTTH200W04TV1. Turbo 2 ultrafast high voltage rectifier. Features. Description
STTH2W4TV1 Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse current Low thermal resistance Reduces switching and conduction losses Insulated package:
More informationObsolete Product(s) - Obsolete Product(s)
High bandwidth analog switch with 16-to-8 bit MUX/DEMUX Features Low R ON : 5.5 Ω typical V CC operating range: 3.0 to 3.6 V Low current consumption: 20 µa ESD HBM model: > 2 kv Channel on capacitance:
More informationSTPS1045B-Y. Automotive power Schottky rectifier. Features. Description
STPS45B-Y Automotive power Schottky rectifier Features Negligible switching losses Low forward voltage drop Low capacitance High reverse avalanche surge capability Avalanche specification AEC-Q qualified
More informationObsolete Product(s) - Obsolete Product(s)
2 W mono amplifier Features 2 W output power into 8 Ω at 12 V, THD = 10% Internally fixed gain of 32 db No feedback capacitor No boucherot cell Thermal protection AC short-circuit protection SVR capacitor
More informationSTTH100W06C. Turbo 2 ultrafast high voltage rectifier. Features. Description
STTH1W6C Turbo 2 ultrafast high voltage rectifier Datasheet production data Features Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses ECOPACK 2 compliant
More informationR 1 typ. = 15 kω. Order codes Marking Polarity Package Packaging. 2N6036 2N6036 NPN SOT-32 Tube 2N6039 2N6039 PNP SOT-32 Tube
2N6036 2N6039 Complementary power Darlington transistors Features. Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode Applications
More informationBAL-2593D5U 50 / 50+j50 balun transformer for 2.45 GHz ISM band Features Application Description Benefits
50 / 50+j50 balun transformer for 2.45 GHz ISM band Features 50 Ω nominal Input / 50+j50 output differential impedance Lo insertion loss Lo amplitude imbalance Lo phase imbalance Small footprint: BAL-2593D5U
More informationSTEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description
High-side current-sense amplifier demonstration board based on the TSC102 Data brief Features Independent supply and input common-mode voltages Wide common-mode operating range: 2.8 V to 30 V Wide common-mode
More informationECMF04-4HSWM10. Common-mode filter with ESD protection for high-speed serial interfaces. Features. Applications. Description
Common-mode filter with ESD protection for high-speed serial interfaces Features Datasheet - production data µqfn-10l 2.60 x 1.35 mm Figure 1. Pin configuration (top view) Very large differential bandwidth
More informationBAT41. Low capacitance small signal Schottky diodes. Features. Description. BAT41ZFILM (Single) SOD-123. BAT41JFILM (Single) SOD-323
Low capacitance small signal Schottky diodes Features Low leakage current losses Negligible switching losses Low forward and reverse recovery times Extremely fast switching Surface mount device Low capacitance
More informationESDALY. Automotive dual Transil array for ESD protection
Automotive dual Transil array for ESD protection Datasheet - production data Applications Where transient overvoltage protection in ESD sensitive equipment is required, such as: Entertainment Signal communications
More information