Handy LCZ Chips Smart Tweezer latest/improved Model ST5S

Transcription

1 Handy LCZ Chips Smart Tweezer latest/improved Model ST5S Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezers Additional Features in latest ST5S Smart Tweezers LCR meter allows you to test various component types, including secondary components of Dissipation Factor (D), Quality Factor (Q). This handheld model also includes other functions that result in a more detailed component analysis. Advance Devices, Inc. Canada is the ORIGINAL & ONLY manufacturer of Smart Tweezers. Inde Enterprises is their stocking distributor as well the only after-sales-service partner in India. We keep all spares in stock to lower the down time of the Smart Tweezers. The in-built ESR mode (Equivalent Series Resistance) helps you better understand the inherent resistance - behavior typically found in capacitors across selected frequencies. in its DIODE mode Smart Tweezers tests diode polarity and indicates if it is short. This Smart Tweezers has a continuity detector. Variable beeper sounds for resistance reading below set thresholds. Additionally, this function helps to locate shorted conductors (e.g. on a PCB) In manual mode, the Smart Tweezers measures a specific circuit parameter like L, C, R, Z or ESR. Manual modes also improves overall component type identification for in-circuit tests. Variable test signal output from 0.5 to 1.0 Vrms, allows to improve test precision in different situation e.g. for in-circuit measurement and loose leaded ceramic capacitors. Visible and audible tolerance mode allows to perform component sorting. Math null function allows to store a prem e a s u r e d o f f s e t a n d i m p r o v e measurement precision. Technical Speciications AC Test Mode Test frequency : 1kHz, 10kHz, 120Hz, 100Hz Test Signal Level : 0.5/1.0 +/- 5% V rms Sine wave Measurement Ranges Resistance R Capacitance C Inductance L Quality factor Q Dissipation factor D Other Specifications Size Weight Battery Type 4-Directional Navigation Control Multi-Parameter Secondary Display : 0.05 Ω to 9.9 MΩ : 0.5 pf to 4999 uf : 0.5 uh to 999 mh : to 1000 : to 1000 : 15.0 x 1.8 x 1.5 cm approx. : 29 grams approx. : 3.7V LiPO rechargeable Automatic Test Mode Battery Indicator LED Display C,L,R,ESR,Diode Modes SWISS MADE Shielded 4-Wire Handles Swiss precision non-magnetic steel with gold-plated tips Swiss made Gold Plated Tips Warranty is 12 months from the date of invoice. It excludes consumable like tips and any mechanically damaged part. Landline: Cell Phone: headoffice@indeonline.in

2 Handy LCZ Chips Smart Tweezer latest/improved Model ST5S Siborg is also a re-seller like Inde, they are not manufacturer of Smart Tweezers An Efficient and Convenient Way to Test SMD Chip Components Built-in high-precision LCR probe Convenient one-hand operation Ideal for Surface Mount Devices Automated component identiication Automated test range selection Manual C, R, L, Z and ESR Modes Adjustable test signal levels Swiss-made precise test leads Diode Polarity/Short Testing Secondary D, Q and ESR parameters Portable and ergonomic design Built-in Li-Ion battery Smart Tweezers is a handheld LCR meter of a new concept. It provides a perfect solution for testing and identification of Surface Mount Devices as well as troubleshooting of complex electronic systems. Its unique mechanical and electronic design combines a pair of precise gold-plated tweezers and a digital LCR meter in compact, lightweight, battery powered instrument. The probe is able to measure resistance, capacitance, inductance with high accuracy and automatic component identification. Testing Surface Mount Devices Surface mount devices are usually tiny and without wire leads, making them more difficult to test and identify than conventional leaded components. Smart Tweezers gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Precise tips reliably contact even the smallest SMD components and take measurements from already soldered devices. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals. Automated Measurements The Smart Tweezers measures quickly and accurately using the automatic component identification feature, thus eliminating unnecessary trial and error time. Smart Tweezers automatically specifies L, C, or R with parallel and series mode and selects a proper measurement range and test frequency for high accuracy measurements. The unit displays component type and more detailed component analysis such as Z and ESR. Lightweight and Ergonomic The integrated measurement head allows the operator to use one hand and focus attention on the tested component and on the job at hand. Sorting, testing and troubleshooting become more efficient and cost effective. 4-wire shielded Smart Tweezers handles assure low capacitance and resistance offset during measurements. High Precision Gold Plated Steel Tips Smart Tweezers greatly simplifies testing and troubleshooting process. Resistance, capacitance and inductance can be measured with automatic selection of the test parameters and range. Spare High Precision Straight Tips Additional High Precision Bent Tips Warranty is 12 months from the date of invoice. It excludes consumable like tips and any mechanically damaged part. Landline: Cell Phone: headoffice@indeonline.in

3

4

5 Low Cost Handy LCZ Chips Smart Tweezer Colibri Smart Tweezers with rechargeable Li-ion Battery, USB Charger Smart Tweezers Colibri Gold Plated Replaceable Steel Tips 4-Directional Navigation Control Multi-Parameter Secondary Display Automatic Test Mode Shielded 4-Wire Handles Battery Indicator LED Display C,L,R,ESR,Diode Modes Smart Tweezers Colibri is a professional quality, low cost LCR/ESR-meter. It is a perfect solution for testing, identifying components and troubleshooting electronic circuits. The unique design combines a pair of tweezers like probes and a digital LCR-meter in one compact and lightweight device. The gold-plated precision probes are designed to work with smallest SMT components. Smart Tweezers Colibri displays component type and value include a secondary parameter for capacitors and inductors. Automatic component identi cation and test frequency selection simpli es measurement by eliminating unnecessary trial and error time. Long battery life and extremely low sleep current makes this device an ideal choice for broad spectrum of applications from production lines to autonomous missions. Using Smart Tweezers Colibri provides a quick and convenient way to test, sort and evaluate SMT components and perform on-board measurements and debugging Features: L, C, R and ESR measurement Bright and easy to read OLED display Automatic or manual identi cation of tested component type Secondary parameters display with automatic Parallel or Series equivalent circuit selection Automatic or manual test frequency selection Standard micro-usb connector for battery charger Auto power off Protective holster Precision, gold-plated tips Technical Speci cations: Test frequency: Test signal level: Basic accuracy: Resistors 0.5% Capacitors 1% Inductors 1% Measurement Ranges: Resistance Capacitance Inductance 100 Hz,1 khz, 10 khz /- 5% Vrms SW 0.05 ohm 9.9 Mohm 0.5 pf 4999 uf 0.5 uh -999 mh Speci cations Size Weight Operating temperature: 14.8 x 2.0 x 1.5 cm 29 grams 0C 50C Warranty is 12 months from the date of our invoice, excludes Li-ion Battery and all physically damaged parts. Landline: Cell Phone: romesh@indeonline.in