MAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
|
|
- Bruno Woods
- 6 years ago
- Views:
Transcription
1 19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT) switches and are configured to route audio signals. The are pin-to-pin compatible parts with the ST Microelectronics quad SPDT STG3699 analog switch. The MAX474 is a quad SPDT switch and the MAX474H is a quad SPDT switch that can be placed in a high-impedance mode. Switching logic is controlled by 2 control bits (CB1 and CB2). The MAX474/ MAX474H also feature a low on-resistance match (.6Ω) and low power-supply current (.3µA), which increases battery life. The are available in a tiny 3mm x 3mm, 16-pin TQFN-EP, and 2.5mm x 2.5mm, 16-pin ultrathin QFN packages. Voice Switching Cellular Phones PDAs and other Handheld Devices MP3 Player Notebook Computers BASEBAND (SPEECH) Applications Typical Operating Circuit NO1 NC1 NO2 NC2 1.6V to 5.5V COM1 COM2 INTERNAL SPEAKER Features Low On-Resistance (.61Ω typ).6ω (typ) Channel-to-Channel Matching.32Ω (typ) On-Resistance Flatness 1.6V to 5.5V Single-Supply Voltage High PSRR Reduces Supply Noise (-6dB typ).8% Total Harmonic Distortion -68dB typ Crosstalk (1kHz) -64dB typ Off-Isolation (1kHz) Low Supply Current (.3µA typ) Low Leakage Current (.1µA typ) Pin-to-Pin Compatible with ST Micro STG3699 (3mm x 3mm) 16-Pin TQFN, and (2.5mm x 2.5mm) 16-Pin Ultra-Thin QFN Packages TOP VIEW PART MAX474ETE+ MAX474EVE+ MAX474HETE+ MAX474HEVE+ NC4 13 COM4 Ordering Information PIN-PACKAGE 16 TQFN-EP (3mm x 3mm) 16 Ultra-Thin QFN (2.5mm x 2.5mm) 16 TQFN-EP (3mm x 3mm) 16 Ultra-Thin QFN (2.5mm x 2.5mm) NO4 CB2 NC TOP MARK Pin Configuration 8 COM3 PKG CODE AEV T AAA V162A2-1 AEW T AAB Note: All devices are guaranteed over the -4 C to +85 C temperature range. EP = Exposed pad. V162A2-1 NO3 NC3 CONTROL LOGIC CB1 CB2 COM3 BLOCKING CAPS EXTERNAL HEADPHONES NO1 COM MAX474 MAX474H *EP NO3 NC2 MIDI (RINGER) NO4 NC4 MAX474 COM4 EXTERNAL HEADPHONES NC1 CB1 NO2 COM2 3mm x 3mm Thin QFN/ 2.5mm x 2.5mm Ultra-Thin QFN *CONNECT EP TO OR LEAVE EP UNCONNECTED. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim s website at
2 ABSOLUTE MAXIMUM RATINGS (All voltages referenced to.), CB_...-.3V to +6.V COM_, NC_, NO_...-.3V to ( +.3V) Continuous Current NO_, NC_, COM_...±3mA Peak Current NO_, NC_, COM_ (pulsed at 1ms, 5% duty cycle)...±4ma Peak Current NO_, NC_, COM_ (pulsed at 1ms, 1% duty cycle)...±5ma Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Continuous Power Dissipation (T A = +7 C) 16-Pin TQFN (3mm x 3mm), Single-Layer Board (derate 15.6mW/ C above +7 C)...125mW 16-Pin TQFN (3mm x 3mm), Multilayer Board (derate 2.8mW/ C above +7 C) mW 16-Pin Ultra-Thin QFN (2.5mm x 2.5mm), MultiLayer Board (derate 11.5mW/ C above +7 C) mW Operating Temperature Range...-4 C to +85 C Junction Temperature C Storage Temperature Range C to +15 C Lead Temperature (soldering, 1s)...+3 C ( = +2.7V to +5.5V, T A = -4 C to +85 C, unless otherwise noted. Typical values are at T A = +25 C, = +3.3V.) (Note 1) POWER SUPPLY PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Supply Voltage Range V = +5.5V, V CB _ = V or.3 1 = +5.5V, V CB _ =.5V or +1.6V.3 5 Supply Current I CC = +2.5V, V CB_ =.5V or +1.4V.1 µa ANALOG SWITCH Analog Signal Range V NC _, V NO _, V COM _, (Note 2) V On-Resistance R ON 1mA; CB_ = low or = 3.3V, I COM_ = high On-Resistance Match Between Channels ΔR ON = 3.3V, V NC _ or V NO _ =.875V; I COM_ = 1mA (Note 3) On-Resistance Flatness R FLAT(NO) to ; I COM_ = 1mA = 3.3V, V COM_ = (Note 4) T A = +25 C.61.9 T A = T MIN to T MAX 1 T A = +25 C.6 T A = T MIN to T MAX.1 T A = +25 C T A = T MIN to T MAX.87 Ω Ω Ω NO_, NC_ Off-Leakage Current I NO _ (OFF), I NC_(OFF) = 5.5V; V NC _ or V NO _ =.3V, 5.5V; V COM _ = 5.5V or.3v µa COM_ On-Leakage Current I COM _ (ON) unconnected; V COM _ =.3V, 5.5V, or = 5.5V, V NC _ or V NO _ =.3V, 5.5V, or unconnected µa 2
3 ELECTRICAL CHARACTERISTICS (continued) ( = +2.7V to +5.5V, T A = -4 C to +85 C, unless otherwise noted. Typical values are at T A = +25 C, = 3.3V.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DYNAMIC CHARACTERISTICS R For N O_, V N O_ = 1V 7 Turn-On Time t L = 32Ω, C L = ON 35pF, Figure 2 For N C _, V N C _ = 1V 21 R For N O_, V N O_ = 1V 21 Turn-Off Time t L = 32Ω, C L = OFF 35pF, Figure 2 For N C _, V N C _ = 1V 55 Charge Injection Q V GEN _ = V; R GEN = Ω; C L = 1nF; Figure 3 Off-Isolation V ISO C L = 5pF; R L = 32Ω; f = 1kHz; V COM _ = 1V RMS ; Figure 4 (Note 5) Crosstalk V CT C L = 5pF; R L = 32Ω; f = 1kHz; V COM _ = 1V RMS ; Figure 4 Power-Supply Rejection Ratio PSRR f = 2kHz, V COM_ = 1V RMS, R L = 5Ω, C L = 5pF ns ns 2 pc -64 db -68 db -6 db Total Harmonic Distortion THD f = 2Hz to 2kHz, V P-P =.5V, R L = 32Ω.8 % NO_, NC_ Off-Capacitance C NC_(OFF), C NO _ (OFF) f = 1MHz, Figure 5 4 pf COM_ On-Capacitance C COM _ (ON) f = 1MHz, Figure 5 15 pf DIGITAL INPUTS (CB_) Input Logic-High V IH = 1.6V to 2.7V 1.4 = 2.7V to 5.5V 1.6 V Input Logic-Low V IL.5 V Input Leakage Current I IN µa Note 1: For TQFN (3mm x 3mm) electrical specifications are production tested at T A = +85 C and guaranteed by design at T A = +25 C and -4 C. For Ultra-Thin QFN (2.5mm x 2.5mm) electrical specifications are production tested at T A = +25 C and guaranteed by design at T A = +85 C and -4 C. Note 2: Signals on COM_, NO_, or NC_ exceeding are clamped by internal diodes. Limit forward-diode current to maximum current rating. Note 3: ΔR ON = R ON(MAX) - R ON(MIN). Note 4: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal ranges. Note 5: Off-isolation = 2log1 [V COM_ / V NO_ ], V COM_ = output, V NO_ = input to off switch. 3
4 ( = 3.3V, T A = +25 C, unless otherwise noted) ON-RESISTANCE (Ω) = 3V ON-RESISTANCE vs. COM VOLTAGE T A = -4 C T A = +85 C T A = +25 C COM VOLTAGE (V) MAX474/4H toc1 ON-RESISTANCE (Ω) = 5V T A = -4 C ON-RESISTANCE vs. COM VOLTAGE T A = +85 C COM VOLTAGE (V) Typical Operating Characteristics T A = +25 C MAX474/4H toc2 TIME (ns) NC TURN-ON/NO TURN-OFF TIME vs. SUPPLY VOLTAGE NO TURN-OFF TIME NC TURN-ON TIME SUPPLY VOLTAGE (V) MAX474/4H toc3 TURN-ON/TURN-OFF TIME (ns) NO TURN-ON/NC TURN-OFF TIME vs. SUPPLY VOLTAGE NO TURN-ON TIME MAX474/4H toc4 TURN-ON/TURN-OFF TIME (ns) NO TURN-ON/NC TURN-OFF TIME vs. TEMPERATURE = 3V NO t ON NC t OFF MAX474/4H toc5 TURN-ON/TURN-OFF TIME (ns) NC TURN-ON/NO TURN-OFF TIME vs. TEMPERATURE = 3V NC t ON MAX474/4H toc6 4 NC TURN-OFF TIME NO t OFF SUPPLY VOLTAGE (V) TEMPERATURE ( C) TEMPERATURE ( C) LOGIC THRESHOLD (V) LOGIC THRESHOLD vs. SUPPLY VOLTAGE V CB RISING V CB FALLING MAX474/4H toc7 SUPPLY CURRENT (na) = 3V = 2.5V SUPPLY CURRENT vs. LOGIC INPUT VOLTAGE = 3V = 2.5V MAX474/4H toc8 CHARGE INJECTION ( pc) = 2.V CHARGE INJECTION vs. COM VOLTAGE = 5.V MAX474/4H toc SUPPLY VOLTAGE (V) LOGIC INPUT VOLTAGE (V) V COM (V) 4
5 Typical Operating Characteristics (continued) ( = 3.3V, T A = +25 C, unless otherwise noted) 1, LEAKAGE CURRENT (pa) OFF-ISOLATION (db) 1, LEAKAGE CURRENT vs. TEMPERATURE I COM(ON) I COM(OFF) TEMPERATURE ( C) OFF-ISOLATION vs. FREQUENCY MAX474/4H toc1 MAX474/4H toc12 ON-LOSS (db) CROSSTALK (db) -2-4 FREQUENCY RESPONSE FREQUENCY (MHz) CROSSTALK vs. FREQUENCY MAX474/4H toc11 MAX474/4H toc FREQUENCY (MHz) FREQUENCY (MHz) 1 TOTAL HARMONIC DISTORTION vs. FREQUENCY R L = 32Ω MAX474/4H toc POWER-SUPPLY REJECTION RATIO vs. FREQUENCY MAX474/4H toc15 THD (%).1 PSRR (db) k 1k 1k FREQUENCY (Hz) FREQUENCY (MHz) 5
6 PIN NAME FUNCTION 1 NC1 Analog Switch 1 Normally Closed Terminal 2 CB1 Digital Control Input for Analog Switch 1 and Analog Switch 2 3 NO2 Analog Switch 2 Normally Open Terminal 4 COM2 Analog Switch 2 Common Terminal 5 NC2 Analog Switch 2 Normally Closed Terminal 6 Ground 7 NO3 Analog Switch 3 Normally Open Terminal 8 COM3 Analog Switch 3 Common Terminal 9 NC3 Analog Switch 3 Normally Closed Terminal 1 CB2 Digital Control Input for Analog Switch 3 and Analog Switch 4 11 NO4 Analog Switch 4 Normally Open Terminal 12 COM4 Analog Switch 4 Common Terminal 13 NC4 Analog Switch 4 Normally Closed Terminal 14 Positive Supply Voltage 15 NO1 Analog Switch 1 Normally Open Terminal 16 COM1 Analog Switch 1 Common Terminal EP EP Exposed Pad. Connect to or leave unconnected for normal operation. Pin Description Detailed Description The quad SPDT audio switches are low on-resistance, low supply current, high powersupply rejection ratio (PSRR) devices that operate from a +1.6V to +5.5V single supply. The MAX474/ MAX474H have two digital control inputs, CB1 and CB2, where each bit controls a pair of switches (see Tables 1 and 2). Applications Information The logic inputs accept up to +5.5V, regardless of supply voltage. For example with a +3.3V supply, CB1 and CB2 can be driven low to and high to +5.5V, allowing for mixed logic levels in a system. Driving CB1 and CB2 rail-to-rail minimizes power consumption. For a 3.3V supply voltage, the logic thresholds are +.5V (low) and +1.6V (high). Analog Signal Levels Analog signals that range over the entire supply voltage range ( to ) can be passed with very little change in on-resistance (see the Typical Operating Characteristics). The switches are bidirectional, so the NO_, NC_, and COM_ terminals can be used as either inputs or outputs. Table 1. MAX474 Truth Table CONTROL SWITCH STATE CB2 CB1 Switch 3/4 Switch 1/2 COM = NC COM = NC 1 COM = NC COM = NO 1 COM = NO COM = NC 1 1 COM = NO COM = NO Table 2. MAX474H Truth Table CONTROL SWITCH STATE CB2 CB1 Switch 3/4 Switch 1/2 COM = NC COM = NC 1 High-Z High-Z 1 COM = NO COM = NC 1 1 COM = NO COM = NO 6
7 NC1 NO1 NC2 NO2 CB1 CB2 NC3 NO3 NC4 NO4 SWITCH 1 SWITCH 2 SWITCH 3 SWITCH 4 MAX474 CONTROL LOGIC COM1 COM2 COM3 COM4 NC1 NO1 NC2 NO2 CB1 CB2 NC3 NO3 NC4 NO4 Hi Z Hi Z Hi Z Hi Z MAX474H CONTROL LOGIC SWITCH 1 SWITCH 2 SWITCH 3 SWITCH 4 COM1 COM2 COM3 COM4 Figure 1. Functional Diagram Test Circuits/Timing Diagrams MAX474 MAX474H V NC_ OR V NO _ NO_ OR NC_ COM_ LOGIC INPUT V 5% tr < 5ns tf < 5ns LOGIC INPUT CB_ R L C L SWITCH OUTPUT V t ON t OFF.8 x V UT.8 x C L INCLUDES FIXTURE AND STRAY CAPACITANCE. CB DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY SENSE OF SWITCH. Figure 2. Switching Time Power-Supply Sequencing and Overvoltage Protection Caution: Do not exceed the Absolute Maximum Ratings since stresses beyond the listed ratings may cause permanent damage to the device. Proper power-supply sequencing is recommended for all CMOS devices. Improper supply sequencing can force the switch into latch-up, causing it to draw excessive supply current. The only way out of latch-up is to recycle the power and reapply properly. Connect all ground pins first, then apply power to, and finally apply signals to NO_, NC_, and COM_. Follow the reverse order upon power-down. PROCESS: BICMOS Chip Information 7
8 MAX474 MAX474H V GEN R GEN Figure 3. Charge injection NC_ OR NO_ COM_ CB_ V IL TO V IH C L Test Circuits/Timing Diagrams (continued) VOUT CB_ CB_ OFF OFF ON ON Q = (Δ )(C L ) Δ OFF OFF LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE. V OR 5Ω CB_ NC_ 1μF MAX474 MAX474H COM_ NO_ V IN MEAS NETWORK ANALYZER 5Ω 5Ω REF OFF-ISOLATION = 2log OFF-LOSS = 2log CROSSTALK = 2log V IN V IN V IN 5Ω 5Ω MEASUREMENTS ARE STANDARDIZED AGAINST SHORT AND OPEN AT SOCKET TERMINALS. OFF-ISOLATION IS MEASURED BETWEEN COM_ AND OFF NO_ OR NC_ TERMINALS. ON-LOSS IS MEASURED BETWEEN COM_ AND ON NO_ OR NC_ TERMINAL ON EACH SWITCH. CROSSTALK IS MEASURED FROM ONE CHANNEL TO THE OTHER CHANNEL. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. Figure 4. Off-Isolation, On-Loss, and Crosstalk 8
9 CAPACITANCE ANALYZER f = 1MHz 1μF COM_ NC_ OR NO_ Figure 5. Channel Off/On-Capacitance MAX474 MAX474H CB_ V IL OR V IH 9
10 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to 12, 16L QFN.EPS PACKAGE OUTLINE, 12,16L QFN, 3x3x.9 MM G 1 2 1
11 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to PACKAGE OUTLINE, 12,16L QFN, 3x3x.9 MM G
12 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to DETAIL A DETAIL B ULTRA THIN QFN.EPS DETAIL A DETAIL B 12
13 REVISION NUMBER REVISION DATE DESCRIPTION Revision History PAGES CHANGED 5/6 Initial release 1 11/7 Adding ultra-thin QFN package 1, 2, 3, 1 13 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 12 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. Boblet
Low-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability
19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More information50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More information10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
More information2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationLow-RON, Dual-SPST/Single-SPDT Clickless Switches with Negative Rail Capability
9-3775; Rev 2; 5/6 Low-RON, Dual-SPST/Single-SPDT Clickless General Description The switches feature negative signal capability that allows signals below ground to pass through without distortion. The
More informationPA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1
9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationDual SPDT Negative Rail Analog Switches with ±VCC Capability
19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature
More informationLow-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
More informationQuad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More information3.5Ω/7Ω Quad SPST Switches with Over-Rail Signal Handling
19-71; Rev ; 1/.5Ω/7Ω Quad SPST Switches with Over-Rail General Description The MAX851/MAX851H/MAX85/MAX85H family of quad single-pole/single-throw (SPST) switches operates from a single +2V to +5.5V supply
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle signals greater than
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationMAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More informationPin Configurations/Functional Diagrams/Truth Tables COM SC70-6 SC70-6 PIN 5 5 XYZ NOTE: SC70-5 PACKAGE HAS LETTERING NEAREST PIN 5.
9-359; Rev ; / General Description The MAX76/MAX77 single-pole/single-throw (SPST) switches operate from a single.8v to 5.5V supply. The MAX76 is a normally closed (NC) switch and the MAX77 is the normally
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
9-352; Rev 2; /6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single-pole/double-throw) switches feature negative signal capability that allows signals below ground to pass
More information5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
More informationMaxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
More informationEVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches
19-77; Rev 2; 5/9 EVALUATION KIT AVAILABLE 5.Gbps PCI Express Passive Switches General Description The high-speed passive switches route PCI Express (PCIe) data between two possible destinations. The MAX4888A
More informationMAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1
19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The MAX8/MAX8H/MAX8/MAX8H family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More informationHigh-Bandwidth T1/E1 Dual-SPDT Switches/ 4:1 Muxes
19-3915; Rev 1; 1/7 High-Bandwidth Dual-SPDT Switches/ General Description The / high-bandwidth, low-on-resistance analog dual SPDT switches/4:1 multiplexers are designed to serve as integrated protection
More informationMAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
More informationS 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413
19-572; Rev ; 12/1 Quad SPST +7V Analog Switches General Description The are analog switches with a low on-resistance of 1I (max) that conduct equally well in both directions. All devices have a rail-to-rail
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More information0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information
.5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally
More informationMAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF
9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat
More informationMAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationMAX4734 LOGIC NO1 GND. Maxim Integrated Products 1
9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has
More informationHigh-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches
9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to
More informationPrecision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers
9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationQuad SPST CMOS Analog Switches
9-3960; Rev 3; 6/06 Quad SPST CMOS Analog Switches General Description The are normally open, quad singlepole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with
More informationUSB 2.0 Hi-Speed and Audio Switches with Negative Signal Capability
19-4136; Rev 1; 3/09 USB 2.0 Hi-Speed and Audio Switches General Description The high-esdprotected DPDT switches multiplex Hi-Speed (480Mbps) USB and analog signals such as AC-coupled audio or video. These
More informationPART MAX4887ETE +5V R0 G0 B0 R1 G1 B1 MAX4887 R2 G2 B2 SEL EN QP GND. Maxim Integrated Products 1
19-3972; Rev ; 2/6 Triple Video Switch General Description The triple, high-frequency switch is intended for notebooks and monitors to permit RGB signals to be switched from one driver to one of two loads
More informationPART MAX4631ESE MAX4633CPE MAX4632EPE MAX4633MJE MAX4632CSE MAX4632CPE MAX4632ESE MAX4632MJE MAX4633CSE MAX4633ESE MAX4633EPE
19-1515; Rev ; 7/99 Fault-Protected, High-oltage, General Description The high-voltage, dual analog switches are pin compatible with the industry-standard DG41/DG43/DG45. They upgrade the existing devices
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationUltra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
More informationHi-Speed USB 2.0 Switches with ±15kV ESD MAX4983E/MAX4984E. Features
9-435; Rev 2; 9/8 EVALUATION KIT AVAILABLE Hi-Speed USB 2. Switches General Description The are high ESD-protected analog switches that combine the low on-capacitance and low on-resistance necessary for
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationThe UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More information*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1
9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With
More informationMAX14585/MAX14585A Hi-Speed USB and Audio Switches with Negative Signal Capability and High-Voltage-Tolerable VBUS Detection
19-5878; Rev ; 5/11 E V A L U A T I O N K I T A V A I L A B L E /A General Description The /A high-esd-protected doublepole/double-throw (DPDT) switches multiplex Hi-Speed (48Mbps) USB and analog signals
More informationQuad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch
19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationLow-Charge Injection, 16-Channel, High-Voltage Analog Switches MAX14800 MAX14803
19-4484; Rev 1; 9/09 Low-Charge Injection, 16-Channel, General Description The provide high-voltage switching on 16 channels for ultrasonic imaging and printer applications. The devices utilize HVCMOS
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More information140ms (min) WDO Pulse Period PART. Maxim Integrated Products 1
19-2804; Rev 2; 12/05 5-Pin Watchdog Timer Circuit General Description The is a low-power watchdog circuit in a tiny 5- pin SC70 package. This device improves system reliability by monitoring the system
More informationHigh-Voltage Switch for Wireless Power
General Description The MAX20304 is a DPST switch intended for wirelesspower-circuit applications. The new application for the portable device is the magnetic card reader. There has been a method to use
More informationLow-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationDual-/Triple-/Quad-Voltage, Capacitor- Adjustable, Sequencing/Supervisory Circuits
19-0622; Rev 0; 8/06 Dual-/Triple-/Quad-Voltage, Capacitor- General Description The are dual-/triple-/ quad-voltage monitors and sequencers that are offered in a small thin QFN package. These devices offer
More informationObsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s) STG3684
LOW VOLTAGE 0.5Ω MAX DUAL SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 3.0V t PD = 0.4ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More informationFeatures. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More informationCLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1
19-2575; Rev 0; 10/02 One-to-Four LVCMOS-to-LVPECL General Description The low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs.
More informationSTG3699AQTR LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE
LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE HIGH SPEED: t PD = 1.5ns (TYP.) at V CC = 3.0V t PD = 1.5ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More informationWAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low
More informationDual-/Triple-/Quad-Voltage, Capacitor- Adjustable, Sequencing/Supervisory Circuits
19-0525; Rev 3; 1/07 EVALUATION KIT AVAILABLE Dual-/Triple-/Quad-Voltage, Capacitor- General Description The are dual-/triple-/quad-voltage monitors and sequencers that are offered in a small TQFN package.
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationWAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information
WAS4729QB Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability Http//:www.sh-willsemi.com Descriptions The WAS4729QB is a high performance, dual Single Pole Double Throw
More informationAS11P2TLR. Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make. Description. Features
Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make feature Description Datasheet - production data Features DFN6L High speed: t PD = 130 ps (typ.) at V CC = 3.0 V t PD = 140 ps
More information0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888
FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationPART MAX4584EUB MAX4585EUB TOP VIEW
19-1521; Rev ; 8/99 General Description The serial-interface, programmable switches are ideal for multimedia applicatio. Each device contai one normally open (NO) single-pole/ single-throw (SPST) switch
More information0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839
.35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More information6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationFEATURES APPLICATIONS
.7, Low On Resistance, + V, +5 V, +3 V, ± 5 V, SPST Switches DESCRIPTION The DG9E and DG9E are monolithic single-pole-single-throw (SPST) analog switches. The DG9E has a normally closed function. The DG9E
More information