MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig. 2

Size: px
Start display at page:

Download "MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig. 2"

Transcription

1 S/CON/SOM42/B/18/12/14 Page 1/5 UK MOSFET BASED DC SOLID-STATE RELAY SOM42 Latest MOSFET technology generation. Ultra low on-state resistance. Low output leakage current. Low control current consumption. Built-in overvoltage protection Reverse protected triggered control input to avoid linear control risks No radiated or conducted disturbances Touch protected housing IP2 Control voltage range Max. permanent output voltage Max. load current with heatsink VDC 11VDC 4ADC Load voltage range Load current range Control input voltage range In & case / Out Insulation Connections Dimensions (WxHxD) Weight 5-11VDC Up to 4A (with heatsink) VDC 2.5kV Screw terminals 45 x 58.5 x 3 8g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to - ) Fig. 2 LOW SIDE WIRING DIAGRAM (Load connected to + ) See Instruction sheet to select the right protective components The red paths (C1/D2) must be as short as possible! See Instruction sheet for selective the right protective components The red paths (C1/D2) must be as short as possible! Fig. 3 INTERNAL DIAGRAM Proud to serve you Data given at Tambient=25 C and subject to modification without previous notice

2 S/CON/SOM42/C/18/12/14 Page 2/5 UK CONTROL INPUT CHARACTERISTICS INPUT CIRCUIT Nom. Control voltage Ucnom 12-24VDC Min. Control current Icmin 35mADC -1µA/ C Control voltage range Uc VDC typical ON=3.3V Control current consumption Ic 32 35mADC (for control voltage range) See fig. 5 Releasing control voltage Ucoffmax 1VDC typical OFF= 2.6V Max. reverse control voltage -Ucmax 32VDC -Icmax<1µA Input impedance Rin Current limitation See fig. 5 POWER OUTPUT CHARACTERISTICS Nominal voltage Uenom 9VDC Voltage range Ut Ue 5-11VDC Non-repetitive peak voltage Utp 2V Overvoltage protection D1 Varistor 75V size 2 Max reverse voltage drop (internal diode at OFF state) POWER CIRCUIT Maximum nominal currents Non-repetitive peak overload current Ie max Resistive Motor See fig. 7 4A Please contact us (limits) Id max 38A See fig. 8 Min. load current Iemin 5mA Max. leakage current Ielk Max. on-state resistance Typ. output capacitance Cout 1.1nF Junction/case thermal resistance per power element Built-in heatsink thermal resistance vertically mounted Rthjc.7K/W Rthra Tra=75 C Heatsink thermal time constant Tthra 1 Tra=4 C Control inputs/power outputs insulation voltage Uimp 2.5kV Inputs/case insulation voltage Uimp 2.5kV Outputs/case insulation voltage Uimp 2.5kV Isolation resistance Rio 1G Isolation capacitance Cio <8pF Maximum junction temperature Tjmax 175 C Storage ambient temperature Tstg -4->+1 C Operating ambient temperature Tamb -25->+9 C See fig. 7 Max. case temperature Tc 1 C PROTECTION CHARACTERISTICS PROTECTION Ielk / Ie 1,8,6,4,2 Leakage current (Ielk) vs DC voltage (Ut) Ut (V) Utmax Utp (=Uemax) Absolute limits Uto Utp. 75 t max (Uto Ut max) Ie P (Uto ( protection Ut max) T ) 1W max Ie t 1 Ielk : Leakage current of the relay Ie : User load nominal current Utp : Relay max. non repetitive peak voltage Utmax : Max. nominal voltage of the relay Uto : Possible overvoltage above Utmax Utn = Ue : User DC power supply voltage t : Overvoltage duration T: Time between 2 overvoltage

3 S/CON/SOM42/C/18/12/14 Page 3/5 UK TIME CHARACTERISTICS Fig. 4 TIME DIAGRAMS TIME CHARACT. Turn on time ton 2µs Turn on delay tdon 2µs Turn off time toff 2µs Turn off delay tdoff 2µs Max. On-Off frequency F(on-off) >1Hz (for high frequency, take 2 x Ie to calculate the heatsink; the protections must be chosen carefully) Refer to the instruction sheet GENERAL INFORMATION CONNEC- TIONS Connections Power Control Screwdriver advised POZIDRIV2 Min and max tightening torque 2 N.m 1.2 N.m Insulated crimp terminals (round tabs, eyelet type) M5 M4 Display Green LED (indicates relay has switched ON) MISC. Housing Mounting Noise level UL94V 2 screws (M4x12mm ; tightening = 1.2N.m) None See mounting sheet Weight 8g STANDARDS GENERAL Standards Protection level Protection against direct touch CE marking UL, culus IEC IP2 E.M.C. IMMUNITY TYPE OF TEST STANDARD LEVEL EFFECT Fast transients bursts EN kV criterion B Electric chocks EN kV criterion B Voltage drop EN

4 S/CON/SOM42/C/18/12/14 Page 4/5 UK CHARACTERISTIC CURVES Fig. 5 INPUT CHARACTERISTIC Fig. 6 ON RESISTANCE VS JUNCTION TEMPERATURE Ic (madc) 5-35 C C C Uc (VDC) RDSon 6 (mohms) Junction Temperature ( C) Fig. 7 Permanent current Ie (ARMS) 45 4 POWER DISSIPATED AND LOAD CURRENT LIMIT VS TEMPERATURE Please refer to the installation notice for precautions about mounting the device on a heatsink. 1.2K/W 1.1K/W.9K/W.75K/W.55K/W.3K/W Power dissipated (W) 97,8 77, K/W 4K/W 2.2K/W 2.1K/W Ambient temperature ( C) 1K/W = No Heatsink 4K/W = 15x15x3mm aluminium sheet 2.2K/W = WF K/W = WF K/W = WF21 1.2K/W = WF K/W = WF1311.9K/W = WF K/W = WF7.55K/W = WF5.3K/W = WF Fig. 8 PEAK OVERLOAD CURRENT vs. PULSE DURATION CHARACTERISTIC Ie 32 (Apk) Non-repetitive D=1% (Tc=1 C, Tjmax=175 C) Repetitive D=5% (Tc=1 C, Tjmax=175 C) Repetitive D=1% (Tc=1 C, Tjmax=175 C) Repetitive D=2% (Tc=1 C, Tjmax=175 C) 12 D t1 t 2 % Repetitive D=5% (Tc=1 C, Tjmax=125 C), Pulse duration (ms)

5 S/CON/SOM42/C/18/12/14 Page 5/5 UK DIMENSIONS AND ACCESSORIES Fig. 9 DIMENSIONS (mm) Fig. 1 ACCESSORIES FASTON : Please contact us 5 Rue Ampère B.P SORBIERS - FRANCE -relais@.com Fax +33 () Service Commercial France Tél. : +33 () Sales Dept.For Europe Tel. : +33 () Sales Dept. Asia : Tél. +33 ()

PRELIMINARY DATA MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig.

PRELIMINARY DATA MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig. MOSFET BASED DC SOLID-STATE RELAY Page 1/ UK SOM41 Latest MOSFET technology generation. Ultra low on-state resistance. Low output leakage current. Low control current consumption. Built-in overvoltage

More information

MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig. 2

MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation VDC 2.5kV Screw terminals 45 x 58.5 x 30 80g. Fig. 2 S/CON/SOM26/B/18/12/14 Page 1/6 UK MOSFET BASED DC SOLID-STATE RELAY SOM26 Latest MOSFET technology generation. Ultra low on-state resistance. Low output leakage current. Low control current consumption.

More information

MOSFET BASED DC SOLID-STATE RELAY (With built-in transient voltage suppressor) In & case / Out Insulation

MOSFET BASED DC SOLID-STATE RELAY (With built-in transient voltage suppressor) In & case / Out Insulation S/CON/SOM675/C/18/12/14 Page 1/6 UK MOSFET BASED DC SOLID-STATE RELAY (With built-in transient voltage suppressor) SOM675 Latest MOSFET technology generation. Ultra low on-state resistance. Low output

More information

MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2.

MOSFET BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2. Page 1/5 UK MOSFET BASED DC SOLID-STATE RELAY SCM0150100 Latest MOSFET technology generation. Ultra low on-state resistance. New innovative isolated driver ensuring fast power transistor turn on and off

More information

celduc r e l a i s Proud to serve you MOSFET BASED DC SOLID STATE RELAY SCM VDC 600VDC 40ADC Page 1/5 GB

celduc r e l a i s Proud to serve you MOSFET BASED DC SOLID STATE RELAY SCM VDC 600VDC 40ADC Page 1/5 GB Page 1/5 GB MOSFET BASED DC SOLID STATE RELAY SCM6 Latest MOSFET technology generation. Ultra low on-state resistance. New innovative isolated driver ensuring fast power transistor turn on and off therefore

More information

IGBT BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2.

IGBT BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2. S/CON/SCI2517/C/19/12/14 Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI2517 Latest high voltage IGBT technology generation. New innovative isolated driver ensuring fast power transistor turn on and off

More information

IGBT BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2.

IGBT BASED DC SOLID-STATE RELAY. In & case / Out Insulation. Fig. 2. Please consult us to select the right protective components C1, D1 & D2. S/CON/SCI512/D/19/12/14 Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI512 Latest high voltage IGBT technology generation. New innovative isolated driver ensuring fast power transistor turn on and off

More information

celduc r e l a i s Proud to serve you celduc MOSFET BASED DC SOLID STATE RELAY SCM VDC 200VDC 100ADC Page 1/5 GB

celduc r e l a i s Proud to serve you celduc MOSFET BASED DC SOLID STATE RELAY SCM VDC 200VDC 100ADC Page 1/5 GB Page 1/5 GB MOSFET BASED DC SOLID STATE RELAY SCM2! Latest MOSFET technology generation.! Ultra low on-state resistance.! New innovative isolated driver ensuring fast power transistor turn on and off therefore

More information

celduc r e l a i s Proud to serve you XKLD31006 DOCUMENT PRELIMINAIRE RELAIS STATIQUE A MOSFET POUR COURANT CONTINU 10-30VDC 40V (60V crête) 10ADC

celduc r e l a i s Proud to serve you XKLD31006 DOCUMENT PRELIMINAIRE RELAIS STATIQUE A MOSFET POUR COURANT CONTINU 10-30VDC 40V (60V crête) 10ADC DOCUMENT PRELIMINAIRE RELAIS STATIQUE A MOSFET POUR COURANT CONTINU Montage rail DIN Technologie à base de MOSFET dernière génération. Très faible résistance à l état passant. Protection contre les surtensions

More information

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC. 4-20mADC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC. 4-20mADC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM Page 1/6 GB DIGITAL THREE PHASE ANGLE CONTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens,

More information

Control Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Control Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM SVTA4690 DIGITAL THREE PHASE ANGLE CONTROLLER Farnell order relais code code 399-6335 SVTA4690! Allows to set the voltage applied to different sort of loads :! Resistive (Bulbs, UV and IR lamps, ovens,

More information

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC 0-10VDC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC 0-10VDC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM Page 1/6 GB DIGITAL THREE PHASE ANGLE CTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens, ),

More information

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC 0-10VDC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC 0-10VDC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM Page 1/6 GB DIGITAL THREE PHASE ANGLE CTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens, ),

More information

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you Power Solid State Relay With Analog Control, pitch.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage

More information

celduc SILD Output : VAC 32A(*) Input : 3-32VDC - I<10mA Diagnostic : 30VDC - 100mA r e l a i s celpac P roud to serve you

celduc SILD Output : VAC 32A(*) Input : 3-32VDC - I<10mA Diagnostic : 30VDC - 100mA r e l a i s celpac P roud to serve you AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting. Ready to use Single-Phase Relay: " Install it & Forget it!" Zero cross model : 7-28AC 5A back to back thyristors

More information

celduc SILD r e l a i s celpac PATENTED! AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting.

celduc SILD r e l a i s celpac PATENTED! AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting. AC Semiconductor Contactor pitch,5mm with Diagnostic compact size and DIN rail mounting. Ready to use SinglePhase Relay: " Install it & Forget it!" Zero cross model : 55VAC 5A back to back thyristors on

More information

celduc SIL Phase angle controller Output : VAC 32A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you

celduc SIL Phase angle controller Output : VAC 32A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage

More information

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use Single-Phase Relay: Phase angle ler Transfer characterisic :Angle open loop Operating voltage

More information

Series SHDC Output: 40A,100 Vdc and 20A,200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays

Series SHDC Output: 40A,100 Vdc and 20A,200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays Oupu: 4A,1 Vdc and 2A,2 Vdc FEATURES/BENEFITS Laes generaion MOSFET echnology Ulra low on-sae resisance Low oupu leakage curren Buil-in overvolage proecion Reverse proeced riggered conrol inpu o avoid

More information

NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays

NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

XI'AN IR-PERI Company

XI'AN IR-PERI Company FineSiliconPowerNetworks HALF-BRIDGE IGBT Features Applications IGBT NPT Technology AC & DC Motor controls VCES = 1200V Ic = 75A VCE(ON) typ. = 2.8V @ Ic = 75A 10μs Short circuit capability Low turn-off

More information

CM200DY-24A. APPLICATION AC drive inverters & Servo controls, etc CM200DY-24A. IC...200A VCES V Insulated Type 2-elements in a pack

CM200DY-24A. APPLICATION AC drive inverters & Servo controls, etc CM200DY-24A. IC...200A VCES V Insulated Type 2-elements in a pack CMDY-A CMDY-A IC...A CES... Insulated Type -elements in a pack APPLICATION AC drive inverters & Servo controls, etc OUTLINE DRAWING & CIRCUIT DIAGRAM Dimensions in mm 9 8 CE E C E G GE 8 () -φ6. MOUNTING

More information

48 Series - Relay interface modules A. Features

48 Series - Relay interface modules A. Features Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive

More information

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STF5N60M2 5N60M2 TO-220FP Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STF5N60M2 5N60M2 TO-220FP Tube N-channel 600 V, 1.3 Ω typ., 3.5 A MDmesh M2 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS@ TJmax RDS(on) max. ID STF5N60M2 650 V 1.4 Ω 3.5 A Extremely low gate

More information

N-channel 600 V, 0.35 Ω typ., 11 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description.

N-channel 600 V, 0.35 Ω typ., 11 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description. N-channel 600 V, 0.35 Ω typ., 11 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package Datasheet - production data Features Order code VDS @ TJmax RDS(on) max ID 650 V 0.38 Ω 11 A Figure 1:

More information

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding

More information

38 Series - Relay Interface Modules A

38 Series - Relay Interface Modules A Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay

More information

Features. Table 1: Device summary Order code Marking Package Packing STW75NF30 75NF30 TO-247 Tube

Features. Table 1: Device summary Order code Marking Package Packing STW75NF30 75NF30 TO-247 Tube N-channel 300 V, 35 mω typ., 60 A STripFET II Power MOSFET in a TO-247 package Datasheet - production data Features Order code VDS RDS(on) max. ID PTOT STW75NF30 300 V 45 mω 60 A 320 W TO-247 1 2 3 Exceptional

More information

Standard Rectifier Module

Standard Rectifier Module Standard Module 3~ M = 6 I = 45 A DA FSM = 3 I A 3~ Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: FO-F-B Package with DCB ceramic educed weight Improved temperature and power

More information

D AB Z DETAIL "B" DETAIL "A"

D AB Z DETAIL B DETAIL A QJD1211 Preliminary Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Split Dual SiC MOSFET Module 1 Amperes/12 Volts Y A AA F D AB Z AC Q DETAIL "B" Q P Q U B

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STF140N6F7 140N6F7 TO-220FP Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STF140N6F7 140N6F7 TO-220FP Tube N-channel 60 V, 0.0031 Ω typ., 70 A STripFET F7 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS RDS(on) max. ID PTOT STF140N6F7 60 V 0.0035 Ω 70 A 33 W Among the

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel

More information

RE17LLBM asymmetrical flashing relay s V AC - solid state output

RE17LLBM asymmetrical flashing relay s V AC - solid state output Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range

More information

NEW Series EMC48S50-04

NEW Series EMC48S50-04 NEW Series EMC8S0-0 Three-Phase Induction 00 80 Vac, kw (Y), kw (D) INDUCTION MOTOR SOLID-STATE REDUCED VOLTAGE STARTER (SOFTSTARTER) WITH SOFTSTOP FEATURE The Series EMC can be used as an alternative

More information

RE22R2MMU Multifunction Timer Relay - 24VDC/ V AC - 2 C/O

RE22R2MMU Multifunction Timer Relay - 24VDC/ V AC - 2 C/O Product data sheet Characteristics RE22R2MMU Multifunction Timer Relay - 24VDC/24..240 V AC - 2 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output

More information

N-channel 650 V, 0.37 Ω typ., 10 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description.

N-channel 650 V, 0.37 Ω typ., 10 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description. N-channel 650 V, 0.37 Ω typ., 10 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package Datasheet - production data Features Order code VDS RDS(on) max ID STFU13N65M2 650 V 0.43 Ω 10A 1 2 3

More information

t p = 10 ms T j initial = T amb

t p = 10 ms T j initial = T amb TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes

More information

38 Series - Relay interface modules A. Features /

38 Series - Relay interface modules A. Features / Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions

More information

CP15TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 15 Amperes/1200 Volts

CP15TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 15 Amperes/1200 Volts Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2 44.±.5 C.58±.4 14.7±.1 D 3.1±.2 79.±.5 E 2.83 72. F.16±.1 4.±.3 G 2.83±.1 72.±.3 H.7 2. J.2±.8 5.±.2 K.87 22.

More information

N-channel 600 V, 0.68 Ω typ., 10 A, SuperMESH Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description

N-channel 600 V, 0.68 Ω typ., 10 A, SuperMESH Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description N-channel 600 V, 0.68 Ω typ., 10 A, SuperMESH Power MOSFET in a TO-220FP ultra narrow leads package Datasheet - production data Features Order code VDS RDS(on) max. ID Ptot STFU10NK60Z 600 V 0.75 Ω 10

More information

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5) 46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance

More information

Energy Management Energy Meter Type EM110

Energy Management Energy Meter Type EM110 Energy Management Energy Meter Type EM110 Single phase energy meter Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Electro-mechanical display Energy readout on display: 6+1 digit

More information

N-channel 650 V, 0.15 Ω typ., 20 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description.

N-channel 650 V, 0.15 Ω typ., 20 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package. Features. Description. N-channel 650 V, 0.15 Ω typ., 20 A MDmesh M2 Power MOSFET in a TO-220FP ultra narrow leads package Datasheet - production data Features Order code VDS RDS(on) max ID 650 V 0.18 Ω 20 A 1 2 3 Extremely low

More information

N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a TO-220FP wide creepage package. Features. Description.

N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a TO-220FP wide creepage package. Features. Description. N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a TO-220FP wide creepage package Datasheet - production data Features Order code VDS @ TJmax RDS(on) max ID STFH10N60M2 650 V 0.60 Ω 7.5 A

More information

Features. Description. Table 1: Device summary. Order code Marking Package Packing STW75N60M6 75N60M6 TO-247 Tube

Features. Description. Table 1: Device summary. Order code Marking Package Packing STW75N60M6 75N60M6 TO-247 Tube N-channel 600 V, 32 mω typ., 72 A MDmesh M6 Power MOSFET in TO-247 package Datasheet - production data Features Order code VDS RDS(on) max. ID STW75N60M6 600 V 36 mω 72 A 3 2 1 TO-247 Figure 1: Internal

More information

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STFH18N60M2 18N60M2 TO-220FP wide creepage Tube

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STFH18N60M2 18N60M2 TO-220FP wide creepage Tube N-channel 600 V, 0.255 Ω typ., 13 A MDmesh M2 Power MOSFET in a TO-220FP wide creepage package Datasheet - production data Features Order code VDS @ TJmax RDS(on) max ID STFH18N60M2 650 V 0.28 Ω 13 A Extremely

More information

Features. Description. Table 1: Device summary Order code Marking Package Packaging STW56N60M2-4 56N60M2 TO247-4 Tube

Features. Description. Table 1: Device summary Order code Marking Package Packaging STW56N60M2-4 56N60M2 TO247-4 Tube N-channel 600 V, 0.045 Ω typ., 52 A MDmesh M2 Power MOSFET in a TO247-4 package Datasheet - production data Features Order code VDS @ TJmax RDS(on) max ID STW56N60M2-4 650 V 0.055 Ω 52 A Excellent switching

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection

More information

Very Low Stray Inductance Phase Leg SiC MOSFET Power Module

Very Low Stray Inductance Phase Leg SiC MOSFET Power Module MSCMC120AM03CT6LIAG Datasheet Very Low Stray Inductance Phase Leg SiC MOSFET Power Module Final May 2018 Contents 1 Revision History... 1 1.1 Revision A... 1 2 Product Overview... 2 2.1 Features... 2 2.2

More information

Automotive-grade N-channel 40 V, 2.9 mω typ., 55 A STripFET F6 Power MOSFET in a PowerFLAT 5x6 package. Features. Description

Automotive-grade N-channel 40 V, 2.9 mω typ., 55 A STripFET F6 Power MOSFET in a PowerFLAT 5x6 package. Features. Description Automotive-grade N-channel 40 V, 2.9 mω typ., 55 A STripFET F6 Power MOSFET in a PowerFLAT 5x6 package Datasheet - production data Features Order code VDS RDS(on) max. ID STL120N4F6AG 40 V 3.6 mω 55 A

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STW48N60M2-4 48N60M2 TO247-4 Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STW48N60M2-4 48N60M2 TO247-4 Tube N-channel 600 V, 0.06 Ω typ., 42 A MDmesh M2 Power MOSFET in a TO247-4 package Datasheet - production data Features Order code V DS @ T Jmax. R DS(on)max. I D STW48N60M2-4 650 V 0.07 Ω 42 A Excellent switching

More information

Automotive-grade N-channel 40 V, 1.3 mω typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package. Features. Description

Automotive-grade N-channel 40 V, 1.3 mω typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package. Features. Description Automotive-grade N-channel 40 V, 1.3 mω typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package Datasheet - production data Features Order code V DS RDS(on) max ID STL210N4F7AG 40 V 1.6 mω 120

More information

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors

More information

Prerelease Product(s) - Prerelease Product(s)

Prerelease Product(s) - Prerelease Product(s) N-channel 1050 V, 0.110 Ω typ., 46 A MDmesh DK5 Power MOSFET in an ISOTOP package Figure 1: Internal schematic diagram Features Order code VDS Datasheet - production data RDS(on) max. ID PTOT STE60N105DK5

More information

Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA

Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,

More information

Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B

Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long

More information

DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

DSA150 Series. xxx Series. 150 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125. 15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty

More information

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STF24N60DM2 24N60DM2 TO-220FP Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STF24N60DM2 24N60DM2 TO-220FP Tube N-channel 600 V, 0.175 Ω typ., 18 A MDmesh DM2 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS @ TJmax RDS(on) max. ID 650 V 0.200 Ω 18 A TO-220FP Fast-recovery body

More information

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STF4N90K5 4N90K5 TO-220FP Tube

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STF4N90K5 4N90K5 TO-220FP Tube N-channel 900 V, 1.90 Ω typ., 4 A MDmesh K5 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS RDS(on) max. ID STF4N90K5 900 V 2.10 Ω 4 A TO-220FP Figure 1: Internal

More information

DIM1000ACM33-TS001. IGBT Chopper Module DIM1000ACM33-TS001 FEATURES KEY PARAMETERS V CES

DIM1000ACM33-TS001. IGBT Chopper Module DIM1000ACM33-TS001 FEATURES KEY PARAMETERS V CES IGBT Chopper Module DS6246-1 July 2018 (LN35934) FEATURES 10.2kV Isolation 10µs Short Circuit Withstand High Thermal Cycling Capability High Current Density Enhanced DMOS SPT Isolated AlSiC Base with AlN

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STP5N80K5 5N80K5 TO-220 Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STP5N80K5 5N80K5 TO-220 Tube N-channel 800 V, 1.50 Ω typ., 4 A MDmesh K5 Power MOSFET in a TO-220 package Datasheet - production data Features Order code VDS RDS(on) max. ID STP5N80K5 800 V 1.75 Ω 4 A Industry s lowest RDS(on) x area

More information

STP3LN80K5, STU3LN80K5

STP3LN80K5, STU3LN80K5 N-channel 800 V, 2.75 Ω typ., 2 A MDmesh K5 Power MOSFET in TO-220 and IPAK packages Datasheet - production data TAB Features Order code V DS RDS(on) max ID TAB IPAK 3 2 1 TO-220 1 2 3 STP3LN80K5 800 V

More information

SMC3251S. Single P-Channel MOSFET FEATURES VDS = -30V, ID = -4A DESCRIPTION APPLICATIONS PART NUMBER INFORMATION

SMC3251S. Single P-Channel MOSFET FEATURES VDS = -30V, ID = -4A DESCRIPTION APPLICATIONS PART NUMBER INFORMATION Single P-Channel MOSFET DESCRIPTION SMC5 is the P-Channel enhancement mode power field effect transistors are using trench DMOS technology. This advanced trench technology devices are well suited for high

More information

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STF10N60M2 10N60M2 TO-220FP Tube

Features. Description. AM15572v1_no_tab. Table 1: Device summary Order code Marking Package Packing STF10N60M2 10N60M2 TO-220FP Tube N-channel 600 V, 0.55 Ω typ., 7.5 A MDmesh M2 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS@TJmax. RDS(on) max. ID STF10N60M2 650 V 0.60 Ω 7.5 A Extremely low gate

More information

LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC

LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

Multi-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi

Multi-function (MI, ME, M2, M1) 2 NO (2 SPST-NO) 12 / / 400 3,000 1, / 0.3 / (5 / 5) AgNi Features Special relay for alternating loads, for applications with pumps, compressors, air conditioning or refrigeration units 2 independent NO output, 12 A 4 functions 2 independent control signals,

More information

RE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics off-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal

More information

2 or 4 pole changeover contact Plug-in/Faston 187

2 or 4 pole changeover contact Plug-in/Faston 187 56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free

More information

STP16N65M2, STU16N65M2

STP16N65M2, STU16N65M2 STP16N65M2, STU16N65M2 N-channel 650 V, 0.32 Ω typ., 11 A MDmesh M2 Power MOSFETs in TO-220 and IPAK packages Features Datasheet production data Order code V DS @ T Jmax R DS(on) max I D STP16N65M2 710

More information

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal

More information

CP10TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 10 Amperes/1200 Volts

CP10TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 10 Amperes/1200 Volts CP1TD1-24A Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 1697-18 (724) 92-7272 1 Amperes/12 Volts Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2

More information

SMC3223S. Single P-Channel MOSFET FEATURES VDS = -30V, ID = -4.5A DESCRIPTION APPLICATIONS PART NUMBER INFORMATION

SMC3223S. Single P-Channel MOSFET FEATURES VDS = -30V, ID = -4.5A DESCRIPTION APPLICATIONS PART NUMBER INFORMATION SMC33S Single P-Channel MOSFET DESCRIPTION SMC33 is the P-Channel enhancement mode power field effect transistors are using trench DMOS technology. This advanced trench technology devices are well suited

More information

Features. Description. Table 1: Device summary Order code Marking Package Packing STF23N80K5 23N80K5 TO-220FP Tube

Features. Description. Table 1: Device summary Order code Marking Package Packing STF23N80K5 23N80K5 TO-220FP Tube N-channel 800 V, 0.23 Ω typ., 16 A MDmesh K5 Power MOSFET in a TO-220FP package Datasheet - production data Features Order code VDS RDS(on) max. ID PTOT STF23N80K5 800 V 0.28 Ω 16 A 35 W TO-220FP Figure

More information

Current monitoring relays CM-SRS.1 For single-phase AC/DC currents

Current monitoring relays CM-SRS.1 For single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent

More information

STPS200170TV1. High voltage power Schottky rectifier

STPS200170TV1. High voltage power Schottky rectifier High voltage power Schottky rectifier Datasheet - production data A1 A2 A2 K1 K2 K2 Description This high voltage Schottky rectifier is suited for high frequency switch mode power supplies. Packaged in

More information

PFU70R360G / PFD70R360G

PFU70R360G / PFD70R360G FEATURES New technology for high voltage device Low RDS(on) low conduction losses Small package Ultra low gate charge cause lower driving requirement 100% avalanche tested Halogen Free APPLICATION Power

More information

Telecommunication Switching Equipment Reed Relay Replacement 28 Vdc, 24 Vac, 48 Vdc Load Driver Industrial Relay Coil Driver

Telecommunication Switching Equipment Reed Relay Replacement 28 Vdc, 24 Vac, 48 Vdc Load Driver Industrial Relay Coil Driver 60 V/0.7 Ohm, General Purpose, 1 Form A, Solid State Relay Technical Data HSSR-8060 Features Compact Solid-State Bidirectional Switch Normally-Off Single-Pole Relay Function (1 Form A) 60 V Output Withstand

More information

Symbol Parameter Rating Units VDSS Drain-Source Voltage -40 V VGSS Gate-Source Voltage ±20 V

Symbol Parameter Rating Units VDSS Drain-Source Voltage -40 V VGSS Gate-Source Voltage ±20 V Single P-Channel MOSFET DESCRIPTION SMC5455 is the P-Channel enhancement mode power field effect transistors are using trench DMOS technology. This advanced technology has been especially tailored to minimize

More information

BZW06. Transil. Description. Features

BZW06. Transil. Description. Features Transil Datasheet - production data Description Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited

More information

Symbol Parameter Rating Units VDSS Drain-Source Voltage -30 V VGSS Gate-Source Voltage ±20 V TC=25 C -22 A

Symbol Parameter Rating Units VDSS Drain-Source Voltage -30 V VGSS Gate-Source Voltage ±20 V TC=25 C -22 A SMC22H Single P-Channel MOSFET DESCRIPTION SMC22 is the P-Channel enhancement mode power field effect transistors are using trench DMOS technology. This advanced technology has been especially tailored

More information

Current monitoring relays CM-SRS.1 for single-phase AC/DC currents

Current monitoring relays CM-SRS.1 for single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

em4 local - Robust Specific characteristics Part number

em4 local - Robust Specific characteristics Part number em4 em4 local em4 local Very compact and easy to program nanoplc Save time in designing your application using the most intuitive graphical function block language of the market Measure accurately your

More information

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents

Current monitoring relays CM-SRS.2 for single-phase AC/DC currents Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact

More information

Standard Rectifier Module

Standard Rectifier Module Standard ectifier Module 3~ ectifier M = 1400 I = 60 A DA FSM = 550 I A 3~ ectifier Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: PWS-D Package with DCB ceramic Improved temperature

More information

SG200-12CS2 200A1200V IGBT Module

SG200-12CS2 200A1200V IGBT Module Typical applications: AC and DC electric motor control Frequency transformer UPS Industry power supply Electric welding machine Characteristics: SPT chip (soft-punch-through) MOS input control Ultra thin

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or

More information

Automotive-grade N-channel 950 V, Ω typ., 17.5 A MDmesh K5 Power MOSFET in a TO-247 package. Features. Description.

Automotive-grade N-channel 950 V, Ω typ., 17.5 A MDmesh K5 Power MOSFET in a TO-247 package. Features. Description. Automotive-grade N-channel 950 V, 0.280 Ω typ., 17.5 A MDmesh K5 Power MOSFET in a TO-247 package Datasheet - production data Features Order code V DS R DS(on) max. I D P TOT STW22N95K5 950 V 0.330 Ω 17.5

More information

Order code V DS R DS(on) max. I D

Order code V DS R DS(on) max. I D N-channel 6 V,.23 Ω typ., 13 A MDmesh M2 EP Power MOSFET in an I²PAK package TAB Features Order code V DS R DS(on) max. I D STI2N6M2-EP 6 V.278 Ω 13 A I²PAK D(2, TAB) 1 2 3 Extremely low gate charge Excellent

More information

Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load

Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal

More information

Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter

Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal

More information

Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink

Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current

More information

Electronic timer CT-SDS.22

Electronic timer CT-SDS.22 CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication

More information

Industry standard 62mm IGBT module. IGBT chip. o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 10 µs short circuit of 150 C

Industry standard 62mm IGBT module. IGBT chip. o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 10 µs short circuit of 150 C Industry standard 62mm IGBT module MIAA-HB12FA-3N 12 V 3 A Chip features IGBT chip o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 1 µs short circuit of 15 C o square RBSOA of 2xIC o low

More information

Industry standard 34mm IGBT module. o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 10 µs short circuit of 150 C

Industry standard 34mm IGBT module. o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 10 µs short circuit of 150 C Industry standard 34mm IGBT module MIFA-HB12FA-N Chip features IGBT chip o Trench FS V-Series IGBT (Fuji 6 th gen) o low VCE(sat) value o 1 µs short circuit of C o square RBSOA of 2xIC o low EMI FRD chip

More information

C Soldering Temperature, for 10 seconds 300 (0.063 in. (1.6mm) from case )

C Soldering Temperature, for 10 seconds 300 (0.063 in. (1.6mm) from case ) INSULATED GATE BIPOLAR TRANSISTOR Features Designed expressly for Switch-Mode Power Supply and PFC (power factor correction) applications 2.5kV, 60s insulation voltage Industry-benchmark switching losses

More information

Characteristics 5 TeSys k contactors and reversing contactors

Characteristics 5 TeSys k contactors and reversing contactors 90 Characteristics contactors k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 424 Product certifications LCp and LPp K06 to

More information