ST 3000 Smart Transmitter Series 100 Remote Diaphragm Seals Models. Specification and Model Selection Guide. Introduction 34-ST /04

Transcription

1 ST 3000 Smart Transmitter Series 100 Remote Diaphragm Seals Models STR12D 0-10 to inh 2 O 0-25 to mbar STR13D 0-5 to psid to 0-7 bar STR14G 0-5 to psig to 0-35 bar STR17G to psig 0-7 to bar STR to psia to 0-35 bar 34-ST /04 Specification and Model Selection Guide Introduction In 1983, Honeywell introduced the first Smart Pressure Transmitter the ST In 1989, Honeywell launched the first all digital, bi-directional protocol for smart field devices. Today, its ST 3000 Series 100 Remote Seal Transmitters continue to bring proven smart technology to a wide spectrum of measurement applications. Typical applications include high accuracy level measurement in pressurized vessels in the chemical and hydrocarbon processing industries. second application consists of accurate flow measurement for slurries and high viscosity fluids in the chemical industry. Honeywell remote seal transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids. ll ST 3000 transmitters can provide a 4-20 m output, Honeywell Digitally Enhanced (DE) output, HRT * output, or FOUNDTION Fieldbus output. When digitally integrated with Honeywell s Process Knowledge System, EXPERION PKS, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics. Honeywell s high-performance ST 3000 S100 transmitters lead the industry in: ccuracy Stability Reliability Rangeability Warranty Includes Lifetime Tranmsitters: ccuracy = +/ % Stability = +/-0.01% per year Reliability = 470 years MTF Rangeability = 400 to 1 Lifetime Warranty = 15 years Figure 1Series 100 Remote Seal Pressure Transmitters feature proven piezoresistive sensor technology. The devices provide comprehensive self-diagnostics to help users maintain high uptime, meet regulatory requirements, and attain high quality standards. S100 transmitters are ideal for critical applications, such as custody transfer of natural gas and energy and material balances, where accuracy and stability are of the utmost importance. "Our commitment to Honeywell field instruments is based on seamless integration with our Honeywell system and the enhanced fault detection that the Honeywell DE protocol offers. Honeywell instruments also offer us a better way of ensuring database integrity over simple analog instruments. In addition, Honeywell's high-quality support has enabled us to better implement solutions to some of our more difficult problems. We have used Honeywell differential pressure smart transmitters for the past eight years. ased on their accuracy and low failure rates, we are now targeting critical flow applications that require the robustness that these transmitters bring. DCS Systems Engineer International Integrated Oil Company

2 Page 2 Description The ST 3000 transmitter can replace any 4 to 20 m output transmitter in use today and operates over a standard two-wire system. The measuring means is a piezoresistive sensor, which actually contains three sensors in one. It contains a differential pressure sensor, a temperature sensor, and a static pressure sensor. Microprocessor-based electronics provide higher span-turndown ratio, improved temperature and pressure compensation, and improved accuracy. The transmitter s meter body and electronics housing resist shock, vibration, corrosion, and moisture. The electronics housing contains a compartment for the single-board electronics, which is isolated from an integral junction box. The single-board electronics is replaceable and interchangeable with any other ST 3000 Series 100 or Series 900 model transmitter. Like other Honeywell transmitters, the ST 3000 features two-way communication between the operator and the transmitter through our Smart Field Configurator (SFC). You can connect the SFC anywhere that you can access the transmitter signal lines. The SCT 3000 Smartline Configuration Toolkit provides an easy way to configure instruments using a personal computer. The toolkit enables configuration of devices before shipping or installation. The SCT 3000 can operate in the offline mode to configure an unlimited number of devices. The database can then be loaded downline during commissioning. Features Choice of linear or square root output conformity is a simple configuration selection. Direct digital integration with Experion PKS and other control systems provides local measurement accuracy to the system level without adding typical /D and D/ converter inaccuracies. Unique piezoresistive sensor automatically compensates input for temperature and static pressure.dded smart features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units for display. Smart transmitter capabilities with local or remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions.

3 Page 3 Operating Conditions ll Models Specifications Parameter Reference Condition Rated Condition Operative Limits Transportation and Storage C F C F C F C F mbient Temperature * 25 ±1 77 ±2 55 to to 194 Humidity % RH 10 to 55 0 to to to 100 Maximum llowable Working Pressure (MWP) Vacuum Region - Minimum Pressure mmhg absolute Supply Voltage, Current, and Load Resistance MWP is minimum of ody Rating or Seal Rating (See Model Selection Guide for Seal MWP) ody MWP STR12D 2500 psig (172 bar) STR13D 2500psig (172 bar) STR14G 500 psig (35 bar) STR17G 3000psig (207 bar) STR psia (35 bar). tmospheric (See Figure 4 for vacuum limitations.) Voltage Range: 10.8 to 42.4 Vdc at terminals Current Range: 3.0 to 21.8 m Load Resistance: 0 to 1440 ohms (as shown in Figure 5) * mbient Temperature Limit is a function of Process Interface Temperature. (See Figure 2.)

4 Page 4 Performance Under Rated Conditions * - Model STR12D (0-10 to inh 2 O) Parameter Upper Range Limit ** Minimum Span inh2o mbar inh2o mbar Description 400 (39.2 F/4 C is standard reference temperature for inh2o range.) Note: Recommended minimum span in square root mode is 20 inh2o (50 mbar). 25 Turndown Ratio 40 to 1 Zero Elevation and Suppression ccuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) ccuracy includes residual error after averaging successive readings. For FOUNDTION Fieldbus use Digital Mode specifications. For HRT use nalog Mode specifications. Combined Zero and Span Temperature Effect per 28 C (50 F) *** No limit except minimum span within ±100% URL. In nalog Mode: ±0.2% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (50 inh2o), accuracy equals: ± inh2o span inh2o or ± ( span mbar) In Digital Mode: ±0.175% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (50 inh2o), accuracy equals: ± inh2o span inh2o or ± ( span mbar) In nalog Mode: ±1.2% of span. For URV below reference point (100 inh2o), effect equals: ± inh2o span inh2o or ± ( span mbar) In Digital Mode: ±1.175% of span. For URV below reference point (100 inh2o), effect equals: ± inh2o span inh2o or ± ( span mbar) * Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm. ** Transmitter URL limit or maximum seal pressure rating, whichever is lower. *** pply 1.5 times factor to capillary lengths greater than 10 feet.

5 Page 5 Performance Under Rated Conditions * - Model STR13D (0-5 to psid) Parameter Description Upper Range Limit ** Minimum Span psid bar psid bar Turndown Ratio 20 to 1 Zero Elevation and Suppression ccuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) Stated accuracy does not apply for models with 2.9 inch diameter remote seal diaphragms. ccuracy includes residual error after averaging successive readings. For FOUNDTION Fieldbus use Digital Mode specifications. For HRT use nalog Mode specifications. No limit except minimum span within 18% and +100% of URL. Specifications valid from 5% to 100% of URL. In nalog Mode: ±0.1% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (30 psi), accuracy equals: ± ( 30 psi ) span psi or ± ( 2 bar span bar ) In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (30 psi), accuracy equals: ± ( 30 psi ) span psi or ± ( 2 bar span bar ) Combined Zero and Span Temperature Effect per 28 C (50 F) *** In nalog Mode: ±0.33% of span. For URV below reference point (30 psi), effect equals: ± ( 30 psi ) span psi or ± ( 2 bar span bar ) In Digital Mode: ±0.305% of span. For URV below reference point (30 psi), effect equals: ± ( 30 psi ) span psi or ± ( 2 bar span bar ) * Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm. ** Transmitter URL limit or maximum seal pressure rating, whichever is lower. *** pply 1.5 times factor to capillary lengths greater than 10 feet.

6 Page 6 Performance Under Rated Conditions * - Model STR14G (0-5 to psig) Parameter Description Upper Range Limit ** Minimum Span psig bar psig bar Turndown Ratio 100 to 1 Zero Elevation and Suppression ccuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) ccuracy includes residual error after averaging successive readings. For FOUNDTION Fieldbus use Digital Mode specifications. For HRT use nalog Mode specifications. No limit except minimum span from absolute zero to 100% of URL. Specifications valid over this range. In nalog Mode: ±0.1% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (20 psi), accuracy equals: ± ( 20 psi ) span psi or ± ( 1.4 bar span bar ) In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (20 psi), accuracy equals: ± ( 20 psi ) span psi or ± ( 1.4 bar span bar ) Combined Zero and Span Temperature Effect per 28 C (50 F) *** In nalog Mode: ±1.88% of span. For URV below reference point (75 psi), effect equals: ± ( 75 psi ) span psi In Digital Mode: ±1.855% of span or ± ( 5.25 bar span bar ) For URV below reference point (75 psi), effect equals: ± ( 75 psi ) span psi or ± ( 5.25 bar span bar ) * Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm. ** Transmitter URL limit or maximum seal pressure rating, whichever is lower. *** pply 1.5 times factor to capillary lengths greater than 10 feet.

7 Performance Under Rated Conditions * - Model STR17G (0-100 to psig) Parameter Description 34-ST Page 7 Upper Range Limit ** Minimum Span psig bar psig bar Turndown Ratio 30 to 1 Zero Elevation and Suppression ccuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) ccuracy includes residual error after averaging successive readings. For FOUNDTION Fieldbus use Digital Mode specifications. For HRT use nalog Mode specifications. Combined Zero and Span Temperature Effect per 28 C (50 F) *** No limit except minimum span from absolute zero to 100% of URL. Specifications valid over this range. In nalog Mode: ±0.15% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (300 psi), accuracy equals: ± ( 300 psi ) span psi or ± ( 21 bar span bar ) In Digital Mode: ±0.125% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (300 psi), accuracy equals: ± ( 300 psi ) span psi or ± ( 21 bar span bar ) In nalog Mode: ±0.70% of span. For URV below reference point (500 psi), effect equals: ± ( 500 psi ) span psi or ± ( 34.5 bar span bar ) In Digital Mode: ±0.675% of span. For URV below reference point (500 psi), effect equals: ± ( 500 psi ) span psi or ± ( 34.5 bar span bar ) * Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm. ** Transmitter URL limit or maximum seal pressure rating, whichever is lower. *** pply 1.5 times factor to capillary lengths greater than 10 feet.

8 Page 8 Performance Under Rated Conditions * - Model STR14 (0-5 to psia) Parameter Description Upper Range Limit ** psia bar absolute Minimum Span psia bar absolute Turndown Ratio 100 to 1 Zero Elevation and Suppression ccuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) ccuracy includes residual error after averaging successive readings. For FOUNDTION Fieldbus use Digital Mode specifications. For HRT use nalog Mode specifications. No limit except minimum span from 0 to 100% URL. In nalog Mode: ±0.1% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (20 psi), accuracy equals: ± ( 20 psi ) span psi or ± ( 1.4 bar span bar ) In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater. For URV below reference point (20 psi), accuracy equals: ± ( 20 psi ) span psi or ± ( 1.4 bar span bar ) Combined Zero and Span Temperature Effect per 28 C (50 F) *** In nalog Mode: ±1.88% of span. For URV below reference point (50 psi), effect equals: ± ( 50 psi ) span psi or ± ( 3.5 bar span bar ) In Digital Mode: ±1.855% of span For URV below reference point (50 psi), effect equals: ± ( 50 psi ) span psi or ± ( 3.5 bar span bar ) * Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm. ** Transmitter URL limit or maximum seal pressure rating, whichever is lower. *** pply 1.5 times factor to capillary lengths greater than 10 feet.

9 Page 9 Performance Under Rated Conditions General for all Models Parameter Output (two-wire) Supply Voltage Effect Damping Time Constant RFI Protection (Standard) Description nalog 4 to 20 m or digital communications DE mode. Options available for FOUNDTION Fieldbus and HRT protocol. ±0.005% span per volt. djustable from 0 to 32 seconds digital damping. Negligible (20 to 1000 MHz at 30 volts per meter). CE Conformity (Europe) 89/336/EEC, Electromagnetic Compatibility (EMC) Directive. Physical and pproval odies Parameter Description Process Interface Seal arrier Diaphgram See Model Selection Guide for Material Options for desired seal type. 316L Stainless Steel, Monel, Hastelloy C, Tantalum Seal Gasket Materials Klinger C-4401 (non-asbestos) Grafoil Mounting racket Carbon Steel (Zinc-Chromate plated) or Stainless Steel. Fill Fluid (Meter ody) Silicone (DC 200) 25 C = 0.94 CTFE (Chlorotrifluoroethylene) 25 C = 1.89 Fill Fluid (Secondary) Silicone (DC 200) 25 C = 0.94 CTFE (Chlorotrifluoroethylene) 25 C = 1.89 Silicone (DC 704) 25 C = 1.07 NEOEE M C = 0.90 Syltherm C = 0.93 Electronic Housing Capillary Tubing Wiring Epoxy-Polyester hybrid paint. Low copper-aluminum alloy. Meets NEM 4X (watertight) and NEM 7 (explosion proof). Stainless steel optional. rmored Stainless Steel or PVC Coated rmored Stainless Steel. Length: 5, 10, 15, 20, 25, and 35 feet (1.5, 3, 4.6, 6.1, 7.5, and 10.7 meters). 2 inch (51 millimeter) S.S. close-coupled nipple is also available. See Model Selection Guide. Refer to Figure 3 for guide to maximum capillary length vs. diaphragm diameter. ccepts up to 16 WG (1.5 mm diameter). Mounting See Figure 6. Dimensions Net Weight pproval odies - Hazardous reas - Canadian Registration Number (CRN) Transmitter: See Figures 9 and 10. Seal: See Model Selection Guide. Transmitter: 15.4 pounds (7 Kg). Total weight is dependent on seal type and capillary length. pproved as explosion proof and intrinsically safe for use in Class I, Division 1, Groups,, C, D locations, and nonincendive for Class I, Division 2, Groups,, C, D locations. pproved EEx ia IIC T4, T5, T6 and EEx d IIC T5, T6 per TEX standards. See attached Model Selection Guide for options. - ll ST 3000 model designs, except STG19L, STG99L, STG170, STG180, have been registered in all provinces and territories in Canada and are marked CRN: 0F8914.5C. Pressure Equipment Directive (97/23/EC) The ST 3000 pressure transmitters listed in this Specification have no pressurized internal volume or have a pressurized internal volume rated less than 1,000 bar (14,500 psig) and/or have a maximum volume of less than 0.1 liter. Therefore, these transmitters are either; not subject to the essential requirements of the directive 97/23/EC (PED, nnex 1) and shall not have the CE mark, or the manufacturer has the free choice of a module when the CE mark is required for pressures > 200 bar (2,900 psig). NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowable pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination.

10 Page 10 Maximum mbient Temperature ( F) ST DP/I LGP/I & P/I Process Interface Temperature ( F) Figure 2mbient temperature and process interface chart. Maximum Length (ft.) S100 Remote Seal Maximum Capillary Length Diaphragm Size (in.) ST3000 This chart is intended to serve as a guide in selecting the appropriate diaphragm size for the required capillary length. DP/I LGP/I & P/I Figure 3Maximum capillary length and diaphragm size chart.

11 Page 11 Maximum Pressure Limited by Flange Rating of Seal Silicone DC to 450 F Silicone DC to 350 F 193 psig Pressure (mmhg) Maximum Pressure Limited by Flange Rating of Seal CTFE 5 to 300 F Special High Vacuum Construction required. Consult STC. 1tm 0 psig psig Process Temperature (Degrees F) -9 psig NEOEE M to 400 F Syltherm to 600 F 193 psig 90 psig Pressure (mmhg) tm 0 psig -9 psig psig Process Temperature (Degrees F) Figure 4ST 3000 Remote Seals operable limits for pressure vs. temperature.

12 Page Operating rea Loop Resistance (ohms) NOTE: minimum of 250 ohms of loop resistance is necessary to support communication. Loop resistance equals barrier resistance plus wire resistance plus receiver resistance. lso, 45 volt operation is permitted if not an intrinsically safe installation. Supply Voltage Figure 5Supply voltage/loop resistance chart. LP Side Maximum level H2 Fixed ref. leg Variable Head H1. Minimum level HP Side NOTE: Lower flange seal should not be mounted over 22 feet below or above the transmitter for silicone fill fluid (11 feet for CTFE fill fluid) with tank at one atmosphere. The combination of tank vacuum and high pressure capillary head effect should not exceed 9 psi vacuum (300 mmhg absolute). Consult Honeywell for installation of STR13D. Figure 6The ST 3000 transmitter with remote diaphragm seals shown mounted on a tank.

13 Page 13 pplication Data* Liquid Level: Closed Tank Determine the minimum and maximum pressure differentials to be measured (Figure 7). PMin = (SGp x a) (SGf x d) = LRV when HP at bottom of tank = URV when LP at bottom of tank PMax = (SGp x b) (SGf x d) Where: = URV when HP at bottom of tank = LRV when LP at bottom of tank Minimum level at 4 m Maximum level at 20 m a = distance between bottom tap and minimum level b = distance between bottom tap and maximum level d = distance between taps SGf = Specific Gravity of capillary fill fluid (see page 8 for values) Max Level Min Level Transmitter above datum Max Level Min Level b b Transmitter at datum Max Level a a LP HP LP HP LP SGp = Specific Gravity of process fluid Min Level b a HP Transmitter below datum Figure 7Closed tank liquid level measurement distances. * Contact STC-Phoenix concerning applications for model STR13D.

14 Page 14 Density or Interface* Calculate the minimum and maximum pressure differentials to be measured. Pmin = (SGmin - SGf) x (d); minimum density, 4m output LP Pmax = (SGmax - SGf) x (d); maximum density, 20m output Where: d = distance between the taps SGmax = maximum Specific Gravity SGmin = minimum Specific Gravity SGf = Specific Gravity of capillary fill fluid (see page 8 for values) HP Figure 8Density, direct acting instrument configuration. * Contact STC-Phoenix concerning applications for model STR13D.

15 Page 15 With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter Reference Dimensions: millimeters inches Plug Optional meters Optional external ground STR12D, STR13D DP/I Remote Seal with Horizontal Pipe Mount Rotational lock LP seal omitted for clarity With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter Optional external ground STR14 P/I Remote Seal with Horizontal Pipe Mount Plug Optional meters Rotational lock SQ. Seal omitted for clarity With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter Optional external ground STR14G, STR17G LGP/I Remote Seal with Horizontal Pipe Mount Plug Optional meters Rotational lock Seal omitted for clarity Figure 9a pproximate horizontal mounting dimensions for Remote Seal Transmitter.

16 Page 16 With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter Optional external ground Reference Dimensions: millimeters inches Plug Optional meters Rotational lock LP seal omitted for clarity STR12D, STR13D DP/I Remote Seal with Vertical Pipe Mount SQ With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter Optional external ground STR14 P/I Remote Seal with Vertical Pipe Mount Plug Optional meters Rotational lock SQ. Seal omitted for clarity With Smart meter Removal 45.7 Clearance 1.8 for ll Caps Without meter Without meter With nalog meter STR14G, STR17G LGP/I Remote Seal with Vertical Pipe Mount (Flat racket) Plug Optional meters Optional external ground Rotational lock Seal omitted for clarity Figure 9b pproximate vertical mounting dimensions for Remote Seal Transmitter.

17 Page 17 Options Ordering Information Mounting racket The angle mounting bracket is available in either zinc-plated carbon steel or stainless steel and is suitable for horizontal or vertical mounting on a two inch (50 millimeter) pipe, as well as wall mounting. n optional flat mounting bracket is also available in carbon steel for two inch (50 millimeter) pipe mounting. Indicating Meter (ME and SM Options) Two integral meter options are available. n analog meter (option ME) is available with a 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display for both analog and digital output and can be configured to display pressure in pre-selected engineering units. HRT Protocol Compatibility (Option HC) n optional electronics module is available for the ST 3000 that provides HRT Protocol compatibility. Transmitters with the HRT Option are compatible with the MS System. (Contact your MS Supplier if an upgrade is required.) Lightning Protection (Option LP) terminal block with circuitry that protects the transmitter from transient surges induced by nearby lightning strikes is available. Indicator Configuration (Option CI) Provides custom configuration of Smart Meters Tagging (Option TG) Up to 30 characters can be added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. Note that a separate nameplate on the meter body contains the serial number and body-related data. stainless steel wired on tag with additional data of up to 4 lines of 28 characters is also available. The number of characters for tagging includes spaces. Transmitter Configuration (Option TC) The factory can configure the transmitter linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad information as specified. Custom Calibration and ID in Memory (Option CC) The factory can calibrate any range within the scope of the transmitter s range and enter an ID tag of up to eight characters in the transmitter s memory. FOUNDTION Fieldbus (Option FF) Equips transmitter with FF protocol for use in kbit/s FF networks. See document 34-ST for additional information on ST 3000 Fieldbus transmitters. Contact your nearest Honeywell sales office, or In the U.S.: Honeywell Industrial utomation & Control North lack Canyon Hwy. Phoenix, Z In Canada: The Honeywell Centre 155 Gordon aker Rd. North York, Ontario M2H 3N In Latin merica: Honeywell Inc. 480 Sawgrass Corporate Parkway, Suite 200 Sunrise, FL (954) In Europe and frica: Honeywell S.. venue du ourget russels, elgium In Eastern Europe: Honeywell Praha, s.r.o. udejovicka Prague 4, Czech Republic In the Middle East: Honeywell Middle East Ltd. Khalifa Street, Sheikh Faisal uilding bu Dhabi, U.. E. In sia: Honeywell sia Pacific Inc. Honeywell uilding, 17 Changi usiness Park Central 1 Singapore Republic of Singapore In the Pacific: Honeywell Pty Ltd. 5 Thomas Holt Drive North Ryde NSW ustralia 2113 (61 2) In Japan: Honeywell K.K Shibaura 1-chrome Minato-ku, Tokyo, Japan Specifications are subject to change without notice. Or, visit Honeywell on the World Wide Web at:

18 Page ST Issue 24 Instructions Select the desired Key Number. The arrow to the right marks the selection available. Make one selection from each Table I and II using the column below the proper arrow. Select as many Table III options as desired (if no options or approvals are desired, specify 9X). ( ) denotes unrestricted availability. letter denotes restricted availability. Restrictions follow Table IV. Key Number I II III (Optional) IV - _ - -, + XXXX KEY NUMER Selection vailabil Description 0-10" to 0-400" H 2 O/0-25 to mbar STR12D (Note) ody Rating*: 3000 psi (172 bar) Compound Characterized 0-5 to psi/ to 0-7 bar STR13D ody Rating*: 3000 psi (172 bar) Note: With Model STR12D, Table III, Option CM must be specified. * Remote seal system pressure rating is body rating or seal rating, whichever is less. TLE I - METER ODY 1 Remote Seal (High Side) 1 Number of Seals 2 Remote Seals 2 1 Remote Seal (Low Side) 3 Fill Fluid Silicone (DC 200) _ 1 _ (Meter ody) CTFE _ 2 _ q q Construction Non-Wetted dapter Head Material 316 St. St. Standard Dual Head Carbon St. (zinc-plated) 316 St. St. for Close-Couple D y y See Specification Sheet 34-ST for figures on construction.

19 Page 19 STR1_D TLE II - SELS Selection 2 3 Format for Seal Selection: Specify 12 characters Common Required Seal Note: The first 3 characters are common to all seals. When selecting required seal, you must specify only the 9 selections within the required seal. Silicone (DC 200) 1 _ Secondary CTFE 2 _ Fill Silicone (DC 704) 3 _ p p Neobee(M20) ** 4 _ Syltherm 800 *** 5 _ p p 5 feet 1.5 m _ 10 feet 3.0 m _ 15 feet 4.5 m SS rmor _ C 20 feet 6.1 m _ D 25 feet 7.5 m _ E Connection Capillary 35 feet 10.7 m _ F of Remote Length 5 feet 1.5 m _ G Seal to 10 feet 3.0 m PVC Coated _ H Meter ody 15 feet 4.5 m SS rmor _ J 20 feet 6.1 m _ K 25 feet 7.5 m _ L 35 feet 10.7 m _ M 2 inch long SS nipple close-coupled _ 2 z z No Selection 0 _ Diaphragm Flange Flange Pressure Diameter Size Rating * NSI Class 150 _ F Flush 3.5" 3" NSI Class 300 _ FC Flanged DIN DN80-PN40 _ FM Seal Diaphragm Upper Insert 316L SS 316 St. St. Wetted Material Hastelloy C 316 St. St. Hastelloy C Hastelloy C C Monel Monel E Non-Wetted CS with Polyester 1 _ Material (upper) Powder Coating 316 St. St. 2 _ olts No Selection _ 0 Sytles No Selection 0 _ Gasket No Selection _ 0 * Standard facing RH RF (raised face) serrated surface finish. Table II co ** Limited vacuum availability. *** Minimum static pressure requirement. No vacuum allowed. See Specifications' Figure 4. Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

20 Page 20 STR1_D TLE II - SELS (continued) Selection 2 3 Diaphragm Flange Flange Const. - See Construction - See Spec. Diameter Size Pressure Spec. Figure 34-ST figure Rating * 34-ST /2" NSI _ C t t 1" NSI _ CC t t NSI _ CCC t t 2.9" 1-1/2" NSI _ CG t t NSI _ CGC t t 2" NSI _ CD t t NSI _ CDC t t 1/2" NSI _ D 1" NSI _ DC NSI _ DCC Flush 1-1/2" NSI _ DG Flanged 4.1" NSI _ DGC Seal with 2" NSI _ DD Lower NSI _ DDC 3" NSI _ DF NSI _ DFC Diaphragm Lower 316L SS 316 St. St. Wetted Material Hastelloy C 316 St. St. Hastelloy C Hastelloy C C Monel Monel E Tantalum 316 St. St. F Tantalum Hastelloy C G Non-Wetted Upper Upper Insert Material (upper, 316 St. St. 316 St. St. 4 _ upper insert) CS 316 St. St. 5 _ olts No Selection _ 0 Without 1/4" NPT Flushing 0 _ Styles Connection With 1/4" NPT Flushing 7 _ Connection Gasket Klinger C-4401 _ K c c (non-asbestos) Grafoil _ G d d Table II continued next page * Standard facing RH RF (raised face) serrated finish. Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

21 Page 21 STR1_D TLE II - SELS (continued) Selection 2 3 Diaphragm Flange Flange Pressure Diameter Size Rating * 2.9" 3" NSI Class 150 _ EF t t (2.85") (2.85" OD NSI Class 300 _ EFC t t extension) DIN DN80-PN40 _ EFM t t Flange 4" NSI Class 150 _ FG Seal with 3.5" (3.70" OD NSI Class 300 _ FGC Extended extension) DIN DN100-PN40 _ FGP Diaphragm Diaphragm Lower 316L SS 316 St. St. E Wetted Material Hastelloy C 316 St. St. E Hastelloy C Hastelloy C EC Non-Wetted CS with Polyester Powder 7 _ Material (flange) Coating olts No Selection _ 0 Extension 2" 2 _ Length 4" 4 _ 6" 6 _ No Selection _ 0 Diaphragm Flange Flange Pressure Rating Diameter Size Dependent on customer flange 3.5" 3" NSI Class 150/300/600 _ GF Diaphragm ody Pancake 316L SS 316 St. St. G Seal Wetted Material Hastelloy C 316 St. St. G Hastelloy C Hastelloy C GC Monel Monel GE Non-Wetted No Selection 0 _ Material olts No Selection _ 0 Styles No Selection 0 _ No Selection _ 0 Table II continued next page * Standard facing RH RF (raised face) serrated finish. Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

22 Page 22 STR1_D TLE II - SELS (continued) Selection 2 3 Diaphragm Flange Flange Pressure Diameter Size Rating * 2.9" 3" NSI Class 150 _ EF t t (2.85") (2.85" OD NSI Class 300 _ EFC t t extension) DIN DN80-PN40 _ EFM t t Flange 4" NSI Class 150 _ FG Seal with 3.5" (3.70" OD NSI Class 300 _ FGC Extended extension) DIN DN100-PN40 _ FGP Diaphragm Diaphragm Lower 316L SS 316 St. St. E Wetted Material Hastelloy C 316 St. St. E Hastelloy C Hastelloy C EC Non-Wetted CS with Polyester Powder 7 _ Material (flange) Coating olts No Selection _ 0 Extension 2" 2 _ Length 4" 4 _ 6" 6 _ No Selection _ 0 Diaphragm Flange Flange Pressure Rating Diameter Size Dependent on customer flange 3.5" 3" NSI Class 150/300/600 _ GF Diaphragm ody Pancake 316L SS 316 St. St. G Seal Wetted Material Hastelloy C 316 St. St. G Hastelloy C Hastelloy C GC Monel Monel GE Non-Wetted No Selection 0 _ Material olts No Selection _ 0 Styles No Selection 0 _ No Selection _ 0 Table II continued next page * Standard facing RH RF (raised face) serrated finish. Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

23 Page 23 STR1_D TLE II - SELS (continued) Selection 2 3 Chemical Diaphragm Flange Flange Pressure Diameter Size Rating Taylor 3.5" Wedge 750 psi _ HM0 v v 5" O.D. Tee "Taylor" Diaphragm Lower Wedge Wetted Material 316L SS 316 St. St. H Hastelloy C 316 St. St. H Non-Wetted No Selection 0 _ Material olts No Selection _ 0 Styles No Selection 0 _ No Selection _ 0 Diaphragm Threaded Process Pressure Diameter Connection Size Rating (NPT Female) CS olts 304 SS olts 1/2" NPT _ KJG t t 2.9" 3/4" NPT _ KKG t t 1" NPT psi psi _ KLG t t 1/2" NPT _ LJG 4.1" 3/4" NPT _ LKG Seal with 1" NPT psi psi _ LLG Threaded Diaphragm Lower Process 316L SS CS J Connection Wetted Material 316L SS 316 St. St. J Non-Wetted Hastelloy C 316 St. St. JC Hastelloy C Hastelloy C JD Monel Monel JE Tantalum 316 St. St. JF Tantalum Hastelloy C. JG CS with Polyester Material Powder Coating _ (upper) Stainless Steel C _ w w olts C.S. _ C 304 St. St. _ D Styles W/O Flushing Connection _ With Flushing Connection F _ Gasket Klinger C-4401 _ K c c (non-asbestos) Grafoil _ G d d Table II continued next page Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

24 Page 24 STR1_D TLE II - SELS (continued) Selection 2 3 Diaphragm Flange Pressure Rating Diameter Size 2.9" 3" Customer clamp rating or _ PF0 t t 4.1" 4" 600 psi, whichever is less _ QG0 Sanitary Diaphragm ody Seal Wetted Material 316L SS 316 St. St. N Non-Wetted No Selection 0 _ Material olts No Selection _ 0 Styles Tri-Clover Tri-Clamp 8 _ Gasket No Selection _ 0 Note: ll sanitary seals have dairy grade 3 approval. Note: Remote seal system pressure rating is body rating or seal rating, whichever is less. TLE III - OPTIONS None 00 nalog Meter (0-100 Even 0-10 Square Root) ME Smart Meter SM FOUNDTION Fieldbus Communications FF r r HRT Protocol compatible electronics HC e e b b Customer Configuration of Smart Meter CI f f Local Zero & Span ZS m m Local Zero LZ x x b Lightning Protection LP Custom Calibration and I.D. in Memory CC Transmitter Configuration - non-fieldbus TC Write Protection WP End Cap Live Circuit Warning Label in Spanish (only with TEX 3D) SP a a End Cap Live Circuit Warning Label in Portuguese (only with TEX 3D) PG a a b End Cap Live Circuit Warning Label in Italian (only with TEX 3D) TL a a End Cap Live Circuit Warning Label in German (only with TEX 3D) GE a a 286SS (NCE) olts and 302/304SS (NCE) Nuts for Heads CR Stainless Steel Customer Wired-On Tag TG (4 lines, 28 characters per line, customer supplied information) Stainless Steel Customer Wired-On Tag (blank) T Mounting racket - Carbon Steel M Mounting racket - ST. ST. S b Flat Mounting racket F 316 ST.ST. Electronics Housing - with M20 Conduit Connections SH n n 1/2" NPT to M20 316SS Conduit dapter (SEEF EEx d IIC) 1 n n 1/2" NPT to 3/4" NPT 316 SS Conduit dapter 2 u u b Stainless Steel Housing with M20 to 1/2" NPT 316 SS Conduit 3 i i dapter (use for FM and CS pprovals) Clean Transmitter for Oxygen or Chlorine Service with Certificate 0X h h Marine Type pprovals (DNV, S, V & LR) MT 2 2 Over-Pressure Leak Test with F3392 Certificate TP Calibration Test Report and Certificate of Conformance (F3399) F1 Certificate of Conformance (F3391) F3 b Certificate of Origin (F0195) F5 FMED (SIL) Certificate F6 NCE Certificate (F0198) F7 o o dditional Warranty - 1 year W1 dditional Warranty - 2 years W2 dditional Warranty - 3 years W3 b dditional Warranty - 4 years W4

25 Page 25 STR1_D TLE III - OPTIONS (continued) Selection 2 3 pproval ody pproval Type Location or Classification No hazardous location approvals 9X Explosion Proof Class I, Div. 1, Groups,,C,D Factory Dust Ignition Proof Class II, III Div. 1, Groups E,F,G Mutual Non-Incendive Class I, Div. 2, Groups,,C,D 1C Intrinsically Safe Class I, II, III, Div. 1, Groups,,C,D,E,F,G Explosion Proof Class I, Div. 1, Groups,C,D CS Dust Ignition Proof Class II, III, Div. 1, Groups E,F,G 2J Intrinsically Safe Class I, II, III, Div. 1, Groups,,C,D,E,F,G S Intrinsically Safe Ex ia IIC T4 4G (ustralia) Non-Sparking Ex n IIC T6 (T4 with SM option) Intrinsically Safe, Zone Ex II 1G EEx ia IIC T4, T5,T6 3S 0/1 Flameproof, Zone 1 Ex II 2G EEx d IIC T5, T6, 3D TEX* Enclosure IP 66/67 Non-Sparking, Zone 2 Ex II 3G EEx n, IIC T6 3N (Honeywell). Enclosure IP 66/67 Multiple Marking** Ex II 1 G EEx ia IIC T4, T5, T6 Int. Safe, Zone 0/1, or Ex II 2 G EEx d IIC T5, T6 3H Flameproof, Zone 1, or Ex II 3 G EEx n, IIC T6 (Honeywell) Non-Sparking, Zone 2 Enclosure IP 66/67 INMETRO Flameproof, Zone 1 Ex d IIC T5 6D (razil) *See TEX installation requirements in the ST 3000 User's Manual b **The user must determine the type of protection required for installation of the equipment. The user shall then check the box [a] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has been checked on the nameplate, the equipment shall not then be reinstalled using any of the other certification types. TLE IV Factory Identification XXXX

26 Page 26 RESTRICTIONS Restriction vailable Only With Not vailable With Letter Table Selection Table Selection a III 3D or 3H b Select only one option from this group c II F, G, JF, JG, d II F, G, JF, JG, e III 4G f III SM h I, II _ 2 _ - 2 _ i III 1C or 2J m III ME, FF n III 1C, 2J o III CR p II DC704 and Syltherm 800 fills and close-couple require SS seal upper. _ C 5 _, _ CC 5 _, _ CCC 5 _, _ D 5 _, _ DC 5 _, _ DCC 5 _, _ DG 5 _, _ DGC 5 _, _ DD 5 _, GE, _ q II 2, 4 r III TC, ME, 4G, 3S s Must be specified with Model STR12D t I 2 II _, _ C, _ D, _ E, _ F, _ H, _ J, _ K, _ L, _ M

27 Page 27 RESTRICTIONS Continued u III 1C, 2J w II J x III FF, SM y I 1, 3 III M, S, F II _ 2 II DC704 and Syltherm 800 fills and close-couple require SS seal upper. _ C 5 _, _ CC 5 _, _ CCC 5 _, _ D 5 _, _ DC 5 _, _ DCC 5 _, _ DG 5 _, _ DGC 5 _, _ DD 5 _, GE, _ z I D 2 III F Note: See ST-83 for Published Specials with pricing. See ST-89 and User's Manual for part numbers. See ST-OE-9 for OMS Order Entry Information including TC, manuals, certificates, drawings and SPINS. See ST-OD-1 for tagging, ID, Transmitter Configuration (TC) and calibration including factory default values. To request a quote for a non-published "special", fax RFQ w/ pplication Data Sht (34-ST-18-01) to Mktg. pplications. See Specification 34-ST for Seal dimensions.

28 Page 28 TLE 1 - Flush Flanged Seals Diaphragm Diameter = 3.5" Number of Seal Materials Flange Size - Pressure Rating - Code Seals Wetted Non-wetted F FC FM C E C E C E C E TLE 2 - Flush Flanged Seals with Lowers Diaphragm Diameter = 2.9" Number of Seal Materials Flange Size - Pressure Rating - Code Seals Wetted Non-wetted C CC CCC CG CGC CD CDC C E F G C E F G C E F G C E F G

29 Page 29 TLE 3 - Flush Flanged Seals with Lowers Diaphragm Diameter = 4.1" Number of Seal Materials Flange Size - Pressure Rating - Code Seals Wetted Non-wetted D DC DCC DG DGC DD DDC DF DFC C E F G C E F G C E F G C E F G TLE 4 - Price dd for Flush Flanged Seals with Lowers and Flushing Connection: Code = 7 Seal Materials Flange Size - Pressure Rating - Code Number of Diaph. Dia. = 2.9" Diaph. Dia. = 4.1" Seals Wetted C, CC, CCC, CG, D, DC, DCC, DG, CG, CD, CDC DGC, DD, DDC, DF, DFC C E F G C E F G

30 Page 30 TLE 5 - Flanged Seals with Extended Diaphragms Number of Seal Materials Flange Size - Pressure Rating - Code Seals Wetted Extension Diaphragm Diameter = 2.9" Diaphragm Diameter = 3.5" EF EFC EFM FG FGC FGP 1 E E EC E E EC E E EC E E EC E E EC E E EC TLE 6 - Seals with Threaded Process Connection with Carbon Steel Uppers: Code = Number of Material - Flange Size - Pressure Rating - Code Seals Wetted without Diaph. Dia. = 2.9" Diaph. Dia. = 4.1" Flushing KJG, KKG, KLG LJG, LKG, LLG Connection 1 J J JC JD JE JF JG J J JC JD JE JF JG

31 Page 31 TLE 7 - Seals with Threaded Process Connection with Stainless Steel Uppers: Code = C Number of Material - Flange Size - Pressure Rating - Code Seals Wetted without Diaph. Dia. = 2.9" Diaph. Dia. = 4.1" Flushing KJG, KKG, KLG LJG, LKG, LLG Connection 1 J JC JD JE JF JG J JC JD JE JF JG TLE 8 - Price dd for Seals with Threaded Process Connection and Flushing Connection: Code = F Seal Materials Flange Size - Pressure Rating - Code Number of Diaph. Dia. = 2.9" Diaph. Dia. = 4.1" Seals Wetted KJG, KKG, KLG LJG, LKG, LLG 1 J J JC JD JE JF JG J J JC JD JE JF JG

32 Page 32 Type Size Nonwetted Material Flush Flanged Seal DIN DN80- PN40 CS SS CS SS CS SS Wetted Materials Diaphragm 316 LSS Hast C Hast C Monel Monel 316 LSS Hast C Monel 316 LSS Hast C Hast C Monel Monel 316 LSS Hast C Monel 316 LSS Hast C Hast C Monel Monel 316 LSS Hast C Monel Upper Insert SS SS Hast C SS Monel N/ SS SS Hast C SS Monel N/ SS SS Hast C SS Monel N/ Construction See Figure Dimension 3.5 Diaphragm Dia. (in.) 10a b 10a 10b a b 10a 10b a b 10a 10b Instrument Connection Upper (Non-Wetted) Instrument Connection Upper (Non-wetted) 1.7" Upper Insert Figure 10a. Flush Flanged Seal Diaphragm Diaphragm Figure 10b. Flush Flanged Seal

33 Page 33 Model Selection Guide, cont. Type Size Dim. 1/2" C 2.4" Diaph. Dia. (in.) " Diaph. Dia. (in.) " Diaph. Dia. (in.) Upper (Non-Wetted) Upper Insert (Non-Wetted) Instrument Connection Flush Flanged Seal with Lower 1" /2" 300 2" 3" 1" 1-1/2" 2" 3" C C C C C C C C Lower Diaphragm Gasket Figure 11. Flush Flanged Seal with Lower ( ) olt* Gasket Lower Instrument Connection User Supplied Flange and Nut C Upper (Non-Wetted) Diaphragm Stud *olts and Upper are same material Figure 12. Flush Flanged Seal with Lower ( )

34 Page 34 Model Selection Guide, cont. Type Size Dim. Flanged Seal with Extended Diaphgram 3" 150 3" 300 DIN DN80- PN40 4" 150 4" 300 DIN DN100- PN40 C* C* C* C* C* C* *Designed to mate with Sch 40 pipe. 2.4" Diaph. Dia. (in.) " Diaph. Dia. (in.) Flange (Non-Wetted) Raised Face Extension C Instrument Connection Extension Length Diaphragm Figure 13. Flanged Seal with Extended Diaphragm User Supplied Flange and olt (3/8-24 NF threads) Type Size Dimension Pancake Seal 3" 150/300/ " Diaph. Dia. (in.) ody Instrument Connection Diaphragm Figure 14. Pancake Seal Type Size Dimension 3.5" Diaph. Dia. (in.) ody Instrument Connection Chemical Tee "Taylor Wedge" Seal 750 psi Diaphragm Figure 15. Chemical Tee "Taylor Wedge"

35 Page 35 Model Selection Guide, cont. Type Size Dim. Seal with Threaded Process Connection 1/4" or 1/2" 3/4" or 1" 2.4" Diaph. Dia. (in.) " Diaph. Dia. (in.) " Diaph. Dia. (in.) Upper (Non-Wetted) Lower Instrument Connection olt Gasket Wetted Diaphragm Figure 16. Seal with Threaded Process Connection Type Size Dim. 1.9" Diaph. Dia. (in.) 2.4" Diaph. Dia. (in.) 2.9" Diaph. Dia. (in.) 4.1" Diaph. Dia. (in.) Instrument Connection Sanitary Seal 2" 2-1/2" 3" ody Diaphragm " Figure 17. Sanitary Seal

36 Page 36 Model Selection Guide, cont. olts Instrument Connection ody (Non-Wetted) Lower Housing Weld by User Diaphragm Gasket Type Size Dimension Saddle Seal 3" 4" or larger 2.4" Diaph. Dia. (in.) Figure 18. 3" Saddle Seal ody (Non-Wetted) Instrument Connection olt Lower Housing Weld by User Diaphragm Gasket Figure 19. 4" or larger Saddle Seal ST 3000 is a registered trademark of Honeywell International Inc. HRT* is a trademark of the Hart Communication Foundation. FOUNDTION is a trademark of the Fieldbus Foundation. Industrial Measurement and Control Honeywell International Inc W. Union Hill Drive Phoenix, rizona Honeywell International Inc.