DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

Size: px
Start display at page:

Download "DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach"

Transcription

1 NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS0: Incremental Encoders with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing a button located under a cap on the rear of the encoder Excellent price/performance ratio D ATA S H E E T up to 8,92 Incremental Encoder CCoreTech technology permits tailor-made solutions for every application, due to its modular design. With DRS incremental encoders, the number of lines from to 8,92 and the width of the zero pulse can be freely programmed by the customer. Therefore, they will be of particular interest to end users, distributors, consulting engineers and system integrators. DRS0 incremental encoders are available with any desired number of lines between and 8,92. Long LED lifetime as a result of automatic light regulation Maximum reliability as a result of opto-asics with Chip-on-Board technology Interchangeable collets for hollow shaft diameters from to 5 mm and /4, 3/8, /2 inch. Whether with face mount flange, servo flange, blind or through hollow shaft with connector or cable outlet, TTL or HTL interface DRS0/ encoders will meet virtually any application profile. Thanks to this wide variety of products, there are numerous possible uses, for example in: machine tools textile machines woodworking machines packaging machines 0-200

2 Incremental Encoder DRS0/DRS, face mount flange up to 8,92 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk Dimensional drawing face mount flange axial R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk PIN and wire allocation/cable core Accessories Connection systems Mounting systems Programming Tool PIN Signal Wire colour Explanation (Cable outlet) B black Signal line 2 Sense + grey Connected internally to U s 3 Z lilac Signal line 4 Z yellow Signal line 5 A white Signal line A brown Signal line 7 N. C. orange Not connected 8 B pink Signal line 9 Screen Housing potential 0 GND blue Zero volt connected to the encoder Sense green Connected internally to GND 2 U s red Supply voltage ) View of the connector M23 fitted to the encoder body ) Potential free to housing N. C. = Not connected

3 DRS0/DRS Technical Data acc. to DIN DRS0/DRS face mount flange Flange type face m. Solid shaft 0 mm per revolution 0000 up to 0892, see order info Electrical Interface TTL/RS 422, -channel HTL/push-pull, -channel Mass ) Approx. 0.3 kg Moment of inertia of the rotor 54 gcm 2 Measuring step 90 /number of lines Reference signal Number Position 2) 90 or 80 Error limits binary number of lines non-binary number of lines 0.04 Measuring step deviation binary number of lines non-binary number of lines 0.0 Max. output frequency TTL 820 khz HTL 200 khz Operating torque max. with shaft seal,000 min - without shaft seal 3) 0,000 min - Max. angular acceleration 5x0 5 rad/s 2 Operating torque Typ. 0.3 Ncm Start up torque Typ. 0.4 Ncm Permissible shaft loading radial 20 N axial 0 N Bearing lifetime 3. x 0 9 revolutions Working temperature range C Storage temperature range C Permissible relative humidity 4) 90 % EMC 5) Resistance to shocks ) 50/ g/ms to vibration 7) 20/ g/hz Protection class IEC 0529 Connector outlet 8) IP 5 Cable outlet IP Operating voltage range Load current TTL/RS 422, V Max. 20 ma TTL/RS 422, 0 32 V Max. 20 ma HTL/push-pull, 0 32 V Max. 0 ma No-load operating current at 0 32 V Typ. 00 ma at 5 V Typ. 20 ma Operation of zero-set 9) 00 ms Initialisation time after power on 40 ms ) Concerning encoder with connector 2) Electrical, logically linked to A and B 3) In case, that shaft seal has been removed by customer 4) Condensation of the optical scanning not permitted 5) To DIN EN and DIN EN ) To DIN EN ) To DIN EN ) With mating connector fitted 9) Only with shaft stationary Order information see page

4 Incremental Encoder DRS0/DRS, face mount flange up to 8,92 Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer Incremental pulse diagram A / A B / B Measuring step Z / Z either zero-pulse width 90 Z / Z or zero-pulse width 80 Electrical interface Supply voltage Interfaces/drivers V TTL (RS 422) 0 32 V TTL (RS 422) 0 32 V HTL (push-pull) Connection type Cable radial Cable axial Connector radial Connector axial Accessories Connection systems Mounting systems Programming Tool

5 DRS0/DRS Order information Incremental Encoder DRS0, face mount flange, solid shaft Point D Point 2 R Point 3 S Point 4 Point 5 0 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 Point 4 4 Electrical interface V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, HTL /push-pull Zero-pulse width V, HTL /push-pull Zero-pulse width 80 = A = B = C = D = E = F Mechanical interface Face mount flange, solid shaft 0 mm = 4 Connection type Connector M23, 2 pin, radial = A Connector M23, 2 pin, axial = B Each number of lines from 0000 up to 0892 possible. Cable core, radial.5 m = K Always 5 characters in clear text. Cable core, radial 3 m = L Cable core, radial 5 m = M Cable core, radial 0 m = N Cable core, axial.5 m = R Cable core, axial 3 m = S Cable core, axial 5 m = T Cable core, axial 0 m = U Order example Incremental Encoder DRS V, TTL/RS 422 zero-pulse width 90 ; face mount flange; connector M23, 2 pin, radial; number of lines: 30 Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S 0 A 4 A Point 3 Point 4 0 NEW Incremental-Encoder DRS face mount flange, solid shaft (number of lines and zero pulse width can be freely programmed by the customer) Point D Point 2 R Point 3 S Point 4 Point 5 Point Point 7 Point 8 Point 9 4 Point 0 0 Point 8 Point 2 Point 3 9 Point 4 2 Electrical interface V, TTL /RS 422 = A 0 32 V, TTL /RS 422 = C 0 32 V, HTL /push-pull = E Mechanical interface Face mount flange, solid shaft 0 mm = 4 Connection type Connector M23, 2 pin, radial = A Connector M23, 2 pin, axial = B Cable core, radial.5 m = K Cable core, axial.5 m = R Factory-programmed to 8,92. Order example Incremental Encoder DRS Volt, TTL/RS 422; face mount flange; connector M23, 2 pin, radial; number of lines: 8,92 (factory-programmed) Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S A 4 A 0 8 Point 3 9 Point 4 2 Please order programming tool separately (see accessories page 8)

6 Incremental Encoder DRS0/DRS, servo flange up to 8,92 Dimensional drawing servo flange radial Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk Dimensional drawing servo flange axial R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk PIN and wire allocation/cable core Accessories Connection systems Mounting systems Programming Tool PIN Signal Wire colour Explanation (Cable outlet) B black Signal line 2 Sense + grey Connected internally to U s 3 Z lilac Signal line 4 Z yellow Signal line 5 A white Signal line A brown Signal line 7 N. C. orange Not connected 8 B pink Signal line 9 Screen Housing potential 0 GND blue Zero volt connected to the encoder Sense green Connected internally to GND 2 U s red Supply voltage ) View of the connector M23 fitted to the encoder body ) Potential free to housing N. C. = Not connected 0-200

7 DRS0/DRS Technical Data acc. to DIN DRS0/DRS servo flange Flange type servo Solid shaft mm per revolution 0000 up to 0892, see order info Electrical Interface TTL/RS 422, -channel HTL/push-pull, -channel Mass ) Approx. 0.3 kg Moment of inertia of the rotor 48 gcm 2 Measuring step 90 /number of lines Reference signal Number Position 2) 90 or 80 Error limits binary number of lines non-binary number of lines 0.04 Measuring step deviation binary number of lines non-binary number of lines 0.0 Max. output frequency TTL 820 khz HTL 200 khz Operating torque max. with shaft seal,000 min - without shaft seal 3) 0,000 min - Max. angular acceleration 5x0 5 rad/s 2 Operating torque Typ. 0.2 Ncm Start up torque Typ Ncm Permissible shaft loading radial 20 N axial 0 N Bearing lifetime 3. x 0 9 revolutions Working temperature range C Storage temperature range C Permissible relative humidity 4) 90 % EMC 5) Resistance to shocks ) 50/ g/ms to vibration 7) 20/ g/hz Protection class IEC 0529 Connector outlet 8) IP 5 Cable outlet IP Operating voltage range Load current TTL/RS 422, V Max. 20 ma TTL/RS 422, 0 32 V Max. 20 ma HTL/push-pull, 0 32 V Max. 0 ma No-load operating current at 0 32 V Typ. 00 ma at 5 V Typ. 20 ma Operation of zero-set 9) 00 ms Initialisation time after power on 40 ms ) Concerning encoder with connector 2) Electrical, logically linked to A and B 3) In case, that shaft seal has been removed by customer 4) Condensation of the optical scanning not permitted 5) To DIN EN and DIN EN ) To DIN EN ) To DIN EN ) With mating connector fitted 9) Only with shaft stationary Order information see page

8 Incremental Encoder DRS0/DRS, servo flange up to 8,92 Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer Incremental pulse diagram A / A B / B Measuring step Z / Z either zero-pulse width 90 Z / Z or zero-pulse width 80 Electrical interface Supply voltage Interfaces/drivers V TTL (RS 422) 0 32 V TTL (RS 422) 0 32 V HTL (push-pull) Connection type Cable radial Cable axial Connector radial Connector axial Accessories Connection systems Mounting systems Programming Tool

9 DRS0/DRS Order information Incremental Encoder DRS0, servo flange, solid shaft Point D Point 2 R Point 3 S Point 4 Point 5 0 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 Point 4 Electrical interface V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, HTL /push-pull Zero-pulse width V, HTL /push-pull Zero-pulse width 80 = A = B = C = D = E = F Mechanical interface Servo flange, solid shaft mm = Connection type Connector M23, 2 pin, radial = A Connector M23, 2 pin, axial = B Each number of lines from 0000 up to 0892 possible. Cable core, radial.5 m = K Always 5 characters in clear text. Cable core, radial 3 m = L Cable core, radial 5 m = M Cable core, radial 0 m = N Cable core, axial.5 m = R Cable core, axial 3 m = S Cable core, axial 5 m = T Cable core, axial 0 m = U Order example Incremental Encoder DRS V, TTL/RS 422 zero-pulse width 90 ; servo flange; connector M23, 2 pin, radial; number of lines: 30 Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point D R S 0 A A 0 0 Point 2 3 Point 3 Point 4 0 NEW Incremental-Encoder DRS, servo flange, solid shaft (number of lines and zero pulse width can be freely programmed by the customer) Point D Point 2 R Point 3 S Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 0 Point 8 Point 2 Point 3 9 Point 4 2 Electrical interface V, TTL /RS 422 = A 0 32 V, TTL /RS 422 = C 0 32 V, HTL /push-pull = E Mechanical interface Servo flange, solid shaft mm = Connection type Connector M23, 2 pin, radial = A Connector M23, 2 pin, axial = B Cable core, radial.5 m = K Cable core, axial.5 m = R Factory-programmed to 8,92. Order example Incremental Encoder DRS Volt, TTL/RS 422; servo flange; connector M23, 2 pin, radial; number of lines: 8,92 (factory-programmed) Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S A A 0 8 Point 3 9 Point 4 2 Please order programming tool separately (see accessories page 8)

10 Incremental Encoder DRS0/DRS, blind hollow shaft up to 8,92 Dimensional drawing blind hollow shaft radial Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer R = bending radius min. 40 mm Insertion depth of mounting shaft min. 5 mm, max. 30 mm General tolerances according to DIN ISO 278-mk Dimensional drawing blind hollow shaft axial Insertion depth of mounting shaft min. 5 mm, max. 30 mm R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk PIN and wire allocation/cable core Accessories Connection systems Mounting systems Collets Programming Tool PIN Signal Wire colour Explanation (Cable outlet) B black Signal line 2 Sense + grey Connected internally to U s 3 Z lilac Signal line 4 Z yellow Signal line 5 A white Signal line A brown Signal line 7 N. C. orange Not connected 8 B pink Signal line 9 Screen Housing potential 0 GND blue Zero volt connected to the encoder Sense green Connected internally to GND 2 U s red Supply voltage ) View of the connector M23 fitted to the encoder body ) Potential free to housing N. C. = Not connected

11 DRS0/DRS Technical Data acc. to DIN DRS0/DRS blind hollow shaft Flange type blind Hollow shaft diameter, 8, 0, 2, 5 mm, /4", 3/8", /2" per revolution 0000 up to 0892, see order info Electrical Interface TTL/RS 422, -channel HTL/push-pull, -channel Mass ) Approx. 0.3 kg Moment of inertia of the rotor See Fig. Measuring step 90 /number of lines Reference signal Number Position 2) 90 or 80 Error limits binary number of lines non-binary number of lines 0.04 Measuring step deviation binary number of lines non-binary number of lines 0.0 Max. output frequency TTL 820 khz HTL 200 khz Operating torque max. 3,000 min - Max. angular acceleration 5x0 5 rad/s 2 Operating torque Typ. 0.4 Ncm Start up torque Typ. 0. Ncm Permissible movement of the drive element radial static/dynamic movement ± 0.3/± 0. mm axial static/dynamic movement ± 0.5/± 0.2 mm Bearing lifetime 3. x 0 9 revolutions Working temperature range C Storage temperature range C Permissible relative humidity 3) 90 % EMC 4) Resistance to shocks ) 50/ g/ms to vibration ) 20/ g/hz Protection class IEC 0529 Connector outlet 7) IP 5 Cable outlet IP Operating voltage range Load current TTL/RS 422, V Max. 20 ma TTL/RS 422, 0 32 V Max. 20 ma HTL/push-pull, 0 32 V Max. 0 ma No-load operating current at 0 32 V Typ. 00 ma at 5 V Typ. 20 ma Operation of zero-set 8) 00 ms Initialisation time after power on 40 ms ) Concerning encoder with connector 2) Electrical, logically linked to A and B 4) To DIN EN and DIN EN mm 5 Fig. 3) Condensation of the optical scanning 5) To DIN EN not permitted ) To DIN EN ) With mating connector fitted 8) Only with shaft stationary gcm 2 Order information see page

12 Incremental Encoder DRS0/DRS, blind hollow shaft up to 8,92 Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer Incremental pulse diagram A / A B / B Measuring step Z / Z either zero-pulse width 90 Z / Z or zero-pulse width 80 Electrical interface Supply voltage Interfaces/drivers V TTL (RS 422) 0 32 V TTL (RS 422) 0 32 V HTL (push-pull) Connection type Cable radial Cable axial Connector radial Connector axial Accessories Connection systems Mounting systems Collets Programming Tool

13 DRS0/DRS Order information Incremental Encoder DRS0, blind hollow shaft Point D Point 2 R Point 3 S Point 4 Point 5 0 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 Point 4 A Electrical interface Mechanical interface Connection type V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width V, HTL /push-pull Zero-pulse width V, HTL /push-pull Zero-pulse width 80 = A = B = C = D = E = F Blind hollow shaft ) = A ) Collets for, 8, 0, 2 mm and /4", 3/8" and /2" as accessories, separate order item (see below). For 5 mm shaft diameter, collet is not needed. Connector M23, 2 pin, radial = A Each number of lines from 0000 Connector M23, 2 pin, axial = B up to 0892 possible. Cable core, radial.5 m Cable core, radial 3 m Cable core, radial 5 m Cable core, radial 0 m Cable core, axial.5 m Cable core, axial 3 m Cable core, axial 5 m Cable core, axial 0 m = K = L = M = N = R = S = T = U Always 5 characters in clear text. Order example Incremental Encoder DRS V, TTL/RS 422 zero-pulse width 90 ; blind hollow shaft; connector M23, 2 pin, radial; number of lines: 30 Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S 0 A A A Point 3 Point 4 0 NEW Incremental-Encoder DRS blind hollow shaft (number of lines and zero pulse width can be freely programmed by the customer) Point D Point 2 R Point 3 S Point 4 Point 5 Point Point 7 Point 8 Point 9 A Point 0 0 Point 8 Point 2 Point 3 9 Point 4 2 Electrical interface V, TTL /RS 422 = A 0 32 V, TTL /RS 422 = C 0 32 V, HTL /push-pull = E Mechanical interface Blind hollow shaft ) = A ) Collets for, 8, 0, 2 mm and /4", 3/8" and /2" as accessories, separate order item (see below). For 5 mm shaft diameter, collet is not needed. Connection type Connector M23, 2 pin, radial = A Connector M23, 2 pin, axial = B Cable core, radial.5 m = K Cable core, axial.5 m = R Factory-programmed to 8,92. Order example Incremental Encoder DRS Volt, TTL/RS 422; blind hollow shaft; connector M23, 2 pin, radial; number of lines: 8,92 (factory-programmed) Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S A A A 0 8 Point 3 9 Point 4 2 Please order programming tool separately (see accessories page 8) Blind hollow shaft collets Part no. Shaft diameter SPZ-00-AD-A mm SPZ-E4-AD-A /4" SPZ-008-AD-A mm SPZ-3E8-AD-A /8" SPZ-00-AD-A mm SPZ-02-AD-A mm SPZ-E2-AD-A /2"

14 Incremental Encoder DRS0/DRS, through hollow shaft up to 8,92 Dimensional drawing through hollow shaft radial Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer Insertion depth of mounting shaft min. 5 mm R = bending radius min. 40 mm General tolerances according to DIN ISO 278-mk PIN and wire allocation/cable core Accessories Connection systems Mounting systems Collets Programming Tool PIN Signal Wire colour Explanation (Cable outlet) B black Signal line 2 Sense + grey Connected internally to U s 3 Z lilac Signal line 4 Z yellow Signal line 5 A white Signal line A brown Signal line 7 N. C. orange Not connected 8 B pink Signal line 9 Screen Housing potential 0 GND blue Zero volt connected to the encoder Sense green Connected internally to GND 2 U s red Supply voltage ) View of the connector M23 fitted to the encoder body ) Potential free to housing N. C. = Not connected

15 DRS0/DRS Technical Data acc. to DIN DRS0/DRS through hollow shaft Flange type through Hollow shaft diameter, 8, 0, 2 mm and /4", 3/8", /2" per revolution 0000 up to 0892, see order info Electrical Interface TTL/RS 422, -channel HTL/push-pull, -channel Mass ) Approx. 0.3 kg Moment of inertia of the rotor See Fig. Measuring step 90 /number of lines Reference signal Number Position 2) 90 or 80 Error limits binary number of lines non-binary number of lines 0.04 Measuring step deviation binary number of lines non-binary number of lines 0.0 Max. output frequency TTL 820 khz HTL 200 khz Operating torque max. 3,000 min - Max. angular acceleration 5x0 5 rad/s 2 Operating torque Typ.. Ncm Start up torque Typ. 2.2 Ncm Permissible movement of the drive element radial static/dynamic movement ± 0.3/± 0. mm axial static/dynamic movement ± 0.5/± 0.2 mm Bearing lifetime 3. x 0 9 revolutions Working temperature range C Storage temperature range C Permissible relative humidity 3) 90 % EMC 4) Resistance to shocks 5) 5 / g/ms to vibration ) 20/ g/hz Protection class IEC 0529 Connector outlet 7) IP 4 Cable outlet IP 4 Operating voltage range Load current TTL/RS 422, V Max. 20 ma TTL/RS 422, 0 32 V Max. 20 ma HTL/push-pull, 0 32 V Max. 0 ma No-load operating current at 0 32 V Typ. 00 ma at 5 V Typ. 20 ma Operation of zero-set 8) 00 ms Initialisation time after power on 40 ms ) Concerning encoder with connector 4) To DIN EN mm Fig. 2) Electrical, logically linked to A and B and DIN EN ,8 3) Condensation of the optical scanning 5) To DIN EN not permitted ) To DIN EN ) With mating connector fitted 8) Only with shaft stationary gcm 2 Order information see page

16 Incremental Encoder DRS0/DRS, through hollow shaft up to 8,92 Incremental Encoder Connector or cable outlet Protection class up to IP Electrical interfaces TTL and HTL Zero-Pulse-Teach via pressing a button DRS: number of lines and zero pulse width can be freely programmed by the customer Incremental pulse diagram A / A B / B Measuring step Z / Z either zero-pulse width 90 Z / Z or zero-pulse width 80 Electrical interface Supply voltage Interfaces/drivers V TTL (RS 422) 0 32 V TTL (RS 422) 0 32 V HTL (push-pull) Connection type Cable radial Connector radial Accessories Connection systems Mounting systems Collets Programming Tool 0-200

17 DRS0/DRS Order information Incremental Encoder DRS0, through hollow shaft Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 Point 4 D R S 0 D Electrical interface Mechanical interface Connection type V, TTL /RS 422 Zero-pulse width V, TTL /RS 422 Zero-pulse width 80 = A = B Through hollow shaft ) = D ) Collets for, 8, 0, 2 mm and /4", 3/8" and /2" as accessories, separate order item (see below). Connector M23, 2 pin, radial = A Cable core, radial.5 m = K Cable core, radial 3 m = L Cable core, radial 5 m = M Each number of lines from 0000 up to 0892 possible. Always 5 characters in clear text V, TTL /RS 422 Zero-pulse width 90 = C Cable core, radial 0 m = N 0 32 V, TTL /RS 422 Zero-pulse width 80 = D 0 32 V, HTL /push-pull Zero-pulse width 90 = E 0 32 V, HTL /push-pull Zero-pulse width 80 = F Order example Incremental Encoder DRS V, TTL/RS 422 zero-pulse width 90 ; through hollow shaft; connector M23, 2 pin, radial; number of lines: 30 Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 D R S 0 A D A Point 3 Point 4 0 NEW Incremental-Encoder DRS through hollow shaft (number of lines and zero pulse width can be freely programmed by the customer) Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 Point 4 D R S D Electrical interface Mechanical interface Connection type V, TTL /RS 422 = A Through hollow shaft ) = D Connector M23, 2 pin, radial = A Factory-programmed to 8, V, TTL /RS 422 = C 0 32 V, HTL /push-pull = E ) Collets for, 8, 0, 2 mm and /4", 3/8" and /2" as accessories, separate order item (see below). Cable core, radial.5 m = K Order example Incremental Encoder DRS Volt, TTL/RS 422; through hollow shaft; connector M23, 2 pin, radial; number of lines: 8,92 (factory-programmed) Point Point 2 Point 3 Point 4 Point 5 Point Point 7 Point 8 Point 9 Point 0 Point Point 2 Point 3 D R S A D A Point 4 2 Please order programming tool separately (see accessories page 8) Through hollow shaft collets Part no. Shaft diameter SPZ-00-AD-D mm SPZ-E4-AD-D /4" SPZ-008-AD-D mm SPZ-3E8-AD-D /8" SPZ-00-AD-D mm SPZ-02-AD-D mm SPZ-E2-AD-D /2"

18 Accessories Programming Tool/Connection systems/mounting systems Dimensional drawings and order information Programming Tool (USB version) for DRS Part no. PGT-05-S Screw-in system M23, 2 pin Cable connector M23 female, 2 pin, straight, screened Part no. Contacts DOS-232-G Cable connector M23, 2 pin, straight, screened Part no. Contacts STE-232-G approx. 55 Connector M23 female, 2 pin, straight, cable 2 cores, 4 x 2 x x x 0.4 mm 2 with screening, capable of being dragged, cable diameter 7.8 mm DOL-232-GM5MA3 DOL-232-G03MMA3 Part no Contacts 2 2 Cable length.5 m 3.0 m DOL-232-G05MMA m DOL-232-G0MMA m 2DOL-232-G20MMA m 2DOL-232-G30MMA m

19 DRS0/DRS Dimensional drawings and order information Cable 8 core, per meter, 4 x 2 x 0.5 mm 2 with screening, cable diameter 5. mm Part no. Wires LTG-2308-MWENC Cable core, per meter, 4 x 2 x x x 0.4 mm 2 with screening, cable diameter 7.5 mm Part no. Wires LTG-24-MW Cable 2 core, per meter, 4 x 2 x x x 0.4 mm 2 with screening, capable of being dragged, cable diameter 7.8 mm LTG-252-MW Part no Wires LTG-22-MW UV and salt water resistant 2 Explanation Couplings Bellows coupling, max. shaft offset radial ± 0.3 mm, axial 0.4 mm, angle ± 4 degrees, torsion spring stiffness 20 Nm/rad, bellows of stainless steel, hubs of aluminium Part no. Shaft diameter KUP-00-B mm mm KUP-00-B mm 0 mm KUP-00-B mm 0 mm KUP-02-B mm 2 mm Cheese-head screw M2,5x8 DIN92 A2 Spring-disc coupling, max. shaft offset radial ± 0.3 mm, axial 0.4 mm, angle ± 2.5 degrees, torsion spring stiffness 50 Nm/rad, flange of aluminium, spring-discs of glass-fibre-reinforced plastic Part no. Shaft diameter KUP-00-F mm 0 mm KUP-00-F mm 0 mm General tolerances according to DIN ISO 278-mk

20 Accessories Mounting systems Dimensional drawings and order information Mechanical Adaptors Adaptor flange of aluminium for face mount flange, spigot 3 mm Part no. Adaption BEF-FA To 50 mm servo flange Adaptor flange of aluminium for face mount flange, spigot 3 mm Part no. Adaption BEF-FA-03-00REC To 0 mm square mounting plate Adaptor flange of aluminium for face mount flange, spigot 3 mm Part no. Adaption BEF-FA-03-00RSA To 0 mm square mounting plate with shock absorbers deep) Spring washer (4x) Hexagonal nut (4x) (secure with Loctite 24)

21 DRS0/DRS Dimensional drawings and order information Mechanical Adaptors Mounting bell incl. fixing set for encoder with servo flange Part no. Flange spigot BEF-MG Diameter 50 mm Mounting angle incl. fixing set for encoder with face mount flange Part no. Flange spigot BEF-WF Diameter 3 mm Servo clamps half ring, Set (comprises 2 pieces) for servo flanges with spigot diameter 50 mm Part no. BEF-WK-SF 2029 BEF-WG-SF Servo clamps small, Set (comprises 3 pieces) for servo flanges Part no

22 Accessories mounting systems/collets Dimensional drawings and order information Mechanical Adaptors Measuring wheel for encoder shafts with diameter 0 mm, type mate- rial plastic (Hytrel), wheel material plastic with aluminium hub Part no. Circumference BEF-MR m Measuring wheel for encoder shafts with diameter 0 mm, type material plastic (Hytrel), wheel material plastic with aluminium hub Part no. Circumference BEF-MR m Collets Collets for blind hollow shaft encoder Part no. Shaft diameter SPZ-00-AD-A mm SPZ-E4-AD-A /4" SPZ-008-AD-A mm SPZ-3E8-AD-A /8" SPZ-00-AD-A mm SPZ-02-AD-A mm SPZ-E2-AD-A /2" Collets for through hollow shaft encoder Part no. Shaft diameter SPZ-00-AD-D mm SPZ-E4-AD-D /4" SPZ-008-AD-D mm SPZ-3E8-AD-D /8" SPZ-00-AD-D mm SPZ-02-AD-D mm SPZ-E2-AD-D /2"

23 DRS0/DRS

24 Contact: /0-0 MD//2000 Printed in Germany (0.05) Subject to change without prior notice The specified product features and technical data do not represent any guarantee 0 A4Stg 2c int22 Australia Phone tollfree sales@sick.com.au Belgium/Luxembourg Phone +32 (0) info@sick.be Brasil Phone sac@sick.com.br Ceská Republika Phone sick@sick.cz China Phone ghk@sick.com.hk Danmark Phone sick@sick.dk Deutschland Phone +49 (0) info@sick.de España Phone info@sick.es France Phone info@sick.fr Great Britain Phone +44 (0) info@sick.co.uk India Phone +9 () ayograj@tecnovaglobal.com Italia Phone info@sick.it Japan Phone +8 (0) info@sick.jp Korea Phone /4 kang@sickkorea.net Nederlands Phone +3 (0) info@sick.nl Norge Phone austefjord@sick.no Österreich Phone +43 (0) office@sick.at Polska Phone info@sick.pl Republika Slowenija Phone +38 (0) selanm@sick.com Russia Phone info@sick-automation.ru Schweiz Phone contact@sick.ch Singapore Phone admin@sicksgp.com.sg Suomi Phone sick@sick.fi Sverige Phone info@sick.se Türkiye Phone pbx info@sick.com.tr Taiwan Phone sickgrc@ms.hinet.net USA Phone sales@stegmann.com More representatives and agencies in all major industrial nations at SICK AG Industrial Sensors Waldkirch Germany SICK STEGMANN GmbH Donaueschingen Germany

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS0: Incremental Encoders with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach

More information

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

DGS60, DGS65 and DGS66: Incremental Encoders for rough environmental conditions

DGS60, DGS65 and DGS66: Incremental Encoders for rough environmental conditions , 5 and : Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variants: and mm solid shafts with servo flange or face mount flange, through or blind

More information

A3M60: Absolute Encoders Multiturn, PROFIBUS

A3M60: Absolute Encoders Multiturn, PROFIBUS Data Sheet A3M60: Absolute Encoders Multiturn, PROFIBUS This ensures a long lifetime and increased operational reliability. These highly integrated singleand multiturn technologies combined with embedded

More information

SinCos SEK52: Motor Feedback Systems with HIPERFACE Interface for Servo Motors

SinCos SEK52: Motor Feedback Systems with HIPERFACE Interface for Servo Motors SinCos SEK52: Motor Feedback Systems with HIPERFACE Interface for Servo Motors glass disc, light sources, detectors and ball bearings eliminates likely sources of failure to the greatest possible extent.

More information

SinCos SCS 60, SCM 60, SCS 70, SCM 70: Motor Feedback Systems with HIPERFACE - Interface for Servo Motors

SinCos SCS 60, SCM 60, SCS 70, SCM 70: Motor Feedback Systems with HIPERFACE - Interface for Servo Motors SinCos SCS 60, SCM 60, SCS 70, SCM 70: Motor Feedback Systems with HIPERFACE - Interface for Servo Motors Writing motor-specific data to the electronic type label and programming are important features

More information

LUT2 Luminescence scanner

LUT2 Luminescence scanner LUT Luminescence scanner Dimension illustration 0. Switching threshold adjustment for low fluorescence Static teach-in to mark and/or background via control cable or control panel on unit Switching frequency

More information

DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions

DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions , 5 and : s for rough environmental conditions elect your individual encoder - Possible product variants: and mm solid shafts with servo flange or face mount flange, through or blind hollow shafts with

More information

DS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode

DS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode DS 00/DT 00 Laser sensor measures distances to 8 m on black material in proximity mode DS 00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects

More information

SinCos SRS 50, SRM 50, SRS 60, SRM 60 SRS 50 Standalone, SRM 50 Standalone: Motor Feedback Systems with HIPERFACE - Interface for Servo Motors

SinCos SRS 50, SRM 50, SRS 60, SRM 60 SRS 50 Standalone, SRM 50 Standalone: Motor Feedback Systems with HIPERFACE - Interface for Servo Motors SinCos SRS 50, SRM 50, SRS 60, SRM 60 SRS 50 Standalone, SRM 50 Standalone: Motor Feedback Systems with HIPERFCE - Interface for Servo Motors Select the motor feedback system to suit your individual requirements.

More information

W 23-2: Focussing on what is essential and economic

W 23-2: Focussing on what is essential and economic Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer

More information

At the heart of these new ranges is a bearing-less, capacitive sensor

At the heart of these new ranges is a bearing-less, capacitive sensor SinCos SEK/SEL52 and SEK/SEL37: Motor Feedback Systems with HIPERFACE interface The holistic scanning almost completely compensates for eccentricity errors. The capacitive operating principle can function

More information

DS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode

DS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode DS00/DT00 Laser sensor measures distances to 0 m on black material in proximity mode DS00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects even

More information

M4000 with M23 connection

M4000 with M23 connection ADDENDUM TO OPERATING INSTRUCTIONS with M connection Multiple Light Beam Safety Device GB Addendum This document is protected by the law of copyright, whereby all rights established therein remain with

More information

MH 15: Short housing, clever mounting for smart solutions

MH 15: Short housing, clever mounting for smart solutions H : Short housing, clever mounting for smart solutions HL photoelectric reflex switch:.0 m/. m (PL 80 A), with polarizing filter. HT photoelectric proximity D ATA S H E E T switch, energetic, scanning

More information

W4S-3 Inox Photoelectric Switch Family

W4S-3 Inox Photoelectric Switch Family DATA SHEET WS- Inox Photoelectric Switch Family Smaller, tougher, better Best optical performance in a robust stainless steel housing WTBS- Inox, BGS 80 mm, Teach-in via wire Scanning distance... 80 mm

More information

W 4-3 miniature photoelectric switch family: Efficient and space-saving

W 4-3 miniature photoelectric switch family: Efficient and space-saving Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch W - miniature photoelectric switch family: Efficient and space-saving influence of environmental effects! Whether humidity

More information

dfs20/dfs21/dfs22/dfs25 incremental Encoders

dfs20/dfs21/dfs22/dfs25 incremental Encoders Product information dfs20/dfs21/dfs22/dfs25 incremental Encoders High-resolution factory-conigured and user programmable encoders for complex applications and high operational demands dfs20/dfs21/dfs22/dfs25

More information

LFT level sensor - the all-round talent with TDR technology

LFT level sensor - the all-round talent with TDR technology level sensor - the all-round talent with TDR technology the impulse is reflected there and runs along the probe back to the electronics, which then calculates the fill level from the time difference between

More information

MH15 Cylindrical Photoelectric Sensors

MH15 Cylindrical Photoelectric Sensors DATA SHEET H Cylindrical Photoelectric Sensors Short and fl ush: A short housing for fl ush mounting The H photoelectric sensor series concentrates on the essential. The H, offers the following optical

More information

W140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges

W140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges Product group W0- BGS Photoelectric proximity switch Energ. Photoelectric proximity switch Photoelectric reflex switch W0-: iniature Photoelectric Switch Series with Large Scanning Ranges The integrated

More information

W12-3: More robust, more accurate, more intelligent

W12-3: More robust, more accurate, more intelligent W-: More robust, more accurate, more intelligent W- is protected effectively from electromagnetic fields. W- adapts to your system. Rotatable plug or cable connections provides increased mounting options,

More information

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS

Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS Online data sheet DS60ETECJD1024 DS60 Core C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DS60ETECJD1024 DS60ETECJD1024 Other models and accessories www.sick.com/ds60_core Illustration

More information

DATA SHEET. IMA Inductive analog sensors. Reliable positioning

DATA SHEET. IMA Inductive analog sensors. Reliable positioning DATA SHEET IMA Inductive analog sensors Reliable positioning Inductive analog sensors positioning reliably and precisely to the highest standards with an extremely large detection range. Inductive analog

More information

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories

More information

W 27-3: The all-rounder: robust, powerful, very wide range of applications

W 27-3: The all-rounder: robust, powerful, very wide range of applications Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:

More information

W 27-3: The all-rounder: robust, powerful, very wide range of applications

W 27-3: The all-rounder: robust, powerful, very wide range of applications Product group W- BGS Photoelecric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:

More information

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS

Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O

More information

DG 60 L Incremental Encoder

DG 60 L Incremental Encoder Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square

More information

Encoders. Rotary Encoders Incremental/Absolute Linear Encoders Motor Feedback Systems PRODUCT CATALOGUE 2009/2010

Encoders. Rotary Encoders Incremental/Absolute Linear Encoders Motor Feedback Systems PRODUCT CATALOGUE 2009/2010 PRODUT TLOGUE 29/21 Encoders Rotary Encoders Incremental/bsolute Linear Encoders Motor Feedback ystems This document provided by Barr-Thorp Electric o., Inc. 8-473-9123 www.barr-thorp.com Incremental Motor

More information

SinCos SKS36S, SKM36S, SKS36S Standalone, SKM36S Standalone: Safety Motor Feedback Systems with HIPERFACE - Interface for Servo Motors

SinCos SKS36S, SKM36S, SKS36S Standalone, SKM36S Standalone: Safety Motor Feedback Systems with HIPERFACE - Interface for Servo Motors SinCos SKS36S, SKM36S, SKS36S Standalone, SKM36S Standalone: Safety Motor Feedback Systems with HIPERFCE - Interface for Servo Motors 12 sine/ cosine periods Motor Feedback Systems TDue to their high electrical

More information

Online data sheet UE12-2FG2D0 UE12-2FG SAFETY RELAYS

Online data sheet UE12-2FG2D0 UE12-2FG SAFETY RELAYS Online data sheet UE12-2FG2D0 UE12-2FG UE12-2FG2D0 UE12-2FG A B C D E F Illustration may differ Detailed technical data Ordering information Type Part no. UE12-2FG2D0 1043917 Other models and accessories

More information

W27-3: The all-rounder: robust, powerful, very wide range of applications

W27-3: The all-rounder: robust, powerful, very wide range of applications Product group W- BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W-: The all-rounder: robust, powerful, very wide range of applications unwanted optical

More information

Absolute Encoders. Intelligent, powerful, precise

Absolute Encoders. Intelligent, powerful, precise P r o d u c C t I i n f o r m at i o n AFS60/afm60 ProfinET Absolute Encoders Intelligent, powerful, precise LEDs talk Industrial Ethernet Intelligent, powerful, precise The trend in the market is increasingly

More information

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi

More information

WFS Fork Sensors. Agile and flexible ideal mounting for labeling applications. P r o d u c t I n f o r m at i o n

WFS Fork Sensors. Agile and flexible ideal mounting for labeling applications. P r o d u c t I n f o r m at i o n P r o d u c t I n f o r m at i o n Fork Sensors Agile and flexible ideal mounting for labeling applications Agile and flexible ideal mounting for labeling applications Product description At a glance Optimized

More information

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS

Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS Online data sheet DFS60S-S1O01024 DFS60S Pro D E F Illustration may differ Ordering information Type Part no. DFS60S-S1O01024 1069517 Other models and accessories www.sick.com/dfs60s_pro H I J K L M N

More information

Vision sensors Inspector

Vision sensors Inspector Technical Description Vision sensors Inspector The intelligent vision solution in an easy-to-use sensor package. Inspector VSPI Solving your inspection problems have never been easier! Robust part inspection

More information

Online data sheet AFS60E-S4AC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60E-S4AC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60E-S4000256 FS/FM60 SSI FS60E-S4000256 FS/FM60 SSI D E F Ordering information Type Part no. FS60E-S4000256 1052119 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Online data sheet DFV60A-22PK65536 DFV60 MEASURING WHEEL ENCODERS

Online data sheet DFV60A-22PK65536 DFV60 MEASURING WHEEL ENCODERS Online data sheet DFV60A-22PK65536 DFV60 A B C D E F Illustration may differ Ordering information Type Part no. DFV60A-22PK65536 1051331 Other models and accessories www.sick.com/dfv60 H I J K L M N O

More information

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0-JP FS/FM0 SSI FS0-JP FS/FM0 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FS0-JP 09 Other models and accessories www.sick.com/fs_fm0_ssi Illustration may

More information

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm

More information

RoHS. TTK70: Absolute, non-contact linear measuring system for linear motors. D a t a S h e e t. Period length 1 mm. Distribué par : 2002/95/EC

RoHS. TTK70: Absolute, non-contact linear measuring system for linear motors. D a t a S h e e t. Period length 1 mm. Distribué par : 2002/95/EC TTK70: Absolute, non-contact linear measuring system for linear motors In order to calculate the absolute position value, the reading head detects both the absolute and the incremental component without

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

Detection Irrespective of Material, Colour and Illumination

Detection Irrespective of Material, Colour and Illumination TECHNICAL DESCRIPTION Ultrasonic Sensors Detection Irrespective of Material, Colour and Illumination AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0.6.0.0. - Fax : 0.6.0.8.0 - Web :

More information

industry guide Maximum reliability for the most aggressive environments Encoders and motor feedback systems for wind power systems

industry guide Maximum reliability for the most aggressive environments Encoders and motor feedback systems for wind power systems industry guide Maximum reliability for the most aggressive environments Encoders and motor feedback systems for wind power systems SICK always ready to seize new technologies and make them usable for our

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

Phone: Fax: Web: -

Phone: Fax: Web:  - ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting

More information

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

Incremental Encoder Model: FOI58

Incremental Encoder Model: FOI58 Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096

More information

Rotary Measurement Technology Incremental Encoders

Rotary Measurement Technology Incremental Encoders -20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

847H. Description. Features. Specifications

847H. Description. Features. Specifications 847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85 Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit

More information

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile.

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile. Rotary encoders absolute / optical right ideas in the measurement of rotation: robust, precise, versatile. Absolute encoder WK02/1 Hollow shaft WK02/1 - robust single-turn angle encoder with through hollow

More information

LENORD. +BAUER... automates motion. GEL 295x Customer-specific precision encoder. Technical Information Version General information.

LENORD. +BAUER... automates motion. GEL 295x Customer-specific precision encoder. Technical Information Version General information. GEL 95x Customer-specific precision encoder LENORD +BAUER... automates motion. Technical Information Version 04- General information Extremly robust rotary encoder with stainless steel housing for measuring

More information

LENORD. +BAUER... automates motion. Magnetic incremental encoder GEL 293 for heavy duty applications. Technical Information Version 04.

LENORD. +BAUER... automates motion. Magnetic incremental encoder GEL 293 for heavy duty applications. Technical Information Version 04. Magnetic incremental encoder GEL 293 for heavy duty applications LENORD +BAUER... automates motion. Technical Information Version 04.14 General information High-resolution magnetic incremental rotary encoder

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10 Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function

More information

Online data sheet TTK70-HXA0-K02 TTK70 MOTOR FEEDBACK SYSTEMS LINEAR HIPERFACE

Online data sheet TTK70-HXA0-K02 TTK70 MOTOR FEEDBACK SYSTEMS LINEAR HIPERFACE Online data sheet TTK70-HXA0-K02 TTK70 TTK70-HXA0-K02 TTK70 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Measuring step Measuring length Ordering information

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number

More information

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation

More information

Incremental encoders 6

Incremental encoders 6 Incremental encoders ELECTRONIC GmbH Incremental encoders 6 6.1 Explanatory notes...6-3 6.2 Functional description...6-4 6.3 Applications...6-5 6.4 Assembly examples...6-6 6.5 Alternative designs...6-8

More information

Universal Radius Mounting Option. Fixed Radius Mounting Option

Universal Radius Mounting Option. Fixed Radius Mounting Option F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA

More information

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en

T10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights

More information

Standard Industrial Types RI 58-O / RI 58-T

Standard Industrial Types RI 58-O / RI 58-T Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Motor Feedback Systems for Electric Drives

Motor Feedback Systems for Electric Drives Industry Guide for Electric Drives Maximum performance for all applications Distribué par : Contact : hvssystem@hvssystem.com Tél : 0326824929 Fax : 0326851908 Siège social : 2 rue René Laennec 51500 Taissy

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just

More information

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Standard Industrial types RI 36-H

Standard Industrial types RI 36-H Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /

More information

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

V18V Photoelectric Sensors for Food & Beverage

V18V Photoelectric Sensors for Food & Beverage Data Sheet V8V Photoelectric Sensors for Food & Beverage Sensors have to be this robust and multifaceted. Thanks to its consistent design and selection of optimized materials, the photoelectric sensor

More information

Multiturn absolute encoder

Multiturn absolute encoder SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

Incremental Encoder for special applications

Incremental Encoder for special applications Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10 Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset

More information

Incremental Shaft Encoders Industrial types

Incremental Shaft Encoders Industrial types Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many

More information

Standard Industrial types RI 58-O / RI 58-T

Standard Industrial types RI 58-O / RI 58-T Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock

More information

Absolute encoders - SSI

Absolute encoders - SSI with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

More information

TECHNICAL DESCRIPTION. Displacement Sensors. Highly Accurate Distance Measurement for Short Distances

TECHNICAL DESCRIPTION. Displacement Sensors. Highly Accurate Distance Measurement for Short Distances TECHNICAL DESCRIPTION Displacement Sensors Highly Accurate Distance Measurement for Short Distances the; pl. -s (deviation; tolerance) In automation, a device for non-contact high-accuracy distance

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos

More information

UC4 Small. Precise. Ultrasonic!

UC4 Small. Precise. Ultrasonic! PRODUCT informati O n UC Small. Precise. Ultrasonic! Reliable detection, independant of colour and surface. AUDIN - 8, avenue de la malle - 570 Saint Brice Courcelles - Tel : 0.6.0.0. - Fax : 0.6.0.8.0

More information

Motor Encoders. With Motor encoders Series M - Optimal control of motor feedback -

Motor Encoders. With Motor encoders Series M - Optimal control of motor feedback - Motor Encoders With Motor encoders Series M - Optimal control of motor feedback - Hengstler supplies the new high-performance motor encoder series M for use with brushless servo motors and stepper motors.

More information

Incremental hollow shaft encoder BRIH EcoMag

Incremental hollow shaft encoder BRIH EcoMag Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply

More information