Facts, Products and Services. Full-line supplier of telecommunications subsystems and equipment for satellites and spacecraft.

Transcription

1 Facts, Products and Services Full-line supplier of telecommunications subsystems and equipment for satellites and spacecraft. < 3

2 > Tesat Spacecom and the world of telecommunications 2 <! Tesat-Spacecom GmbH & Co.KG, based in Backnang, Germany, designs and manufactures payload equipment for communications satellites. It has 700 employees and achieved total sales of 103 million EUR in The company has participated in more than 350 space projects. Tesat-Spaecom s core product is the travelling-wave tube amplifier which is supplied to more than 45% of the open world market. Moreover, Tesat-Spacecom is developing laser crosslinks which operate at very high bit rates to transmit information between multimedia system satellites. Block Diagram of a Communications Payload All necessary space qualified manufacturing processes including silver plating and soldering facilities are available at Tesat-Spacecom for the production of the flight hardware. All tests are performed in the test area fully equipped with thermal vacuum and vibration test facilities, high and low power computercontrolled test benches. MPM ANT RX RCV/CONV IMUX SWA DEMOD OBP MOD CAMP LIN TWTA/SSPA SWA OMUX ANT TX Receive antenna Input multiplexer Switch assembly On-board processor (Switching equipment) Demodulator Modulator Channel ampl. Linearizer Power ampl. (travelling wave tube/ solid state ampl.) Switch assy Output multipl. Transmit antenna Receiver/ Converter EPC Electr. Power Conditioner EPC OISL transparent/regenerative regenerative transparent/regenerative Opt. Terminal product scope core products

3 Thermo vacuum chambers for testing space equipment Satellite Communications Systems In the scope of the Artemis project, Tesat-Spacecom was responsible for development and manufacturing of the Ka-Band return repeater Tesat-Spacecom s space activities comprise system design, development, production, integration and testing as well as the management of satellite projects and communications equipment for space vehicles. Payloads for communications satellites Complete telecommunications equipment for the frequency ranges of 1.7/2.6 (L/S-Band), 4/6 GHz (C-Band), 8 GHz (X-Band)/ 11/12/ 14 GHz (Ku-Band), 20/30 GHz (Ka-Band) and 39/44 GHz (EHF-Band). 3 Payloads for broadcasting satellites Complete telecommunications equipment for the frequency ranges of 12/18 GHz. Output multiplexer in thermo vacuum chamber Earth exploration systems Communications equipment for weather satellites and other earth observation satellites for the transmission of measured data to earth stations and the distribution of evaluated data. Space stations and space transport systems Communications systems for information transfer within stations and information exchange between platforms, scientific satellites, data relay satellites and with earth stations.

4 > Projects and References Tesat-Spacecom has supplied payloads or subsystems for the following space programs: ECS Eutelsat Complete telecommunications payloads for five satellites. 64 <!

5 DFS Kopernikus System leadership, development and supply of telecommunications payloads for three satellites and the drives for the solar generators. TV-Sat Telecommunications payloads for two satellites. Telecommunications equipment for TDF, Tele-X, Olympus. Artemis Development and manufacturing of the Ka-Band return repeater. Euroskyway Data transmission subsystem for advanced multimedia satellites. The following weather/earth exploration satellites have received their payloads or subsystem from Tesat-Spacecom: Meteosat Telecommunications payloads for five satellites. Envisat Telecommunications equipment for systems used for earth observation and scientific experiments. Radarsat 2 Data transmission system for one satellite. Cryosat Data transmission system for one satellite. Sar-Lupe Data transmission system and pulsed amplifier subsystems for five satellites. Terra-Sar Data transmission system and pulsed amplifier subsystem for one satellite. Cosmo Data transmission system for one satellite. Customers 5 Metop Complete data transmission subsystems for high data rates as well as the transmit unit for low data rates. Europe: Alcatel Space Astrium Alenia Aerospazio ESA DLR OHB Helios II Data transmission system for two satellites. Rocsat 2 Data transmission system for one satellite. Since 1971, Tesat-Spacecom has been involved in the above satellite projects USA/Canada: Space Systems Loral TRW Lockheed Martin Space EMS Boeing Space Systems Asia: CAST ISRO NEC MELCO

6 Key components for communications satellites are the power > amplifiers in the telecommunications payload. More than 30 years of experience enable Tesat-Spacecom to provide Travelling Wave Tube Amplifiers (TWTAs) for space applications. Today, Tesat-Spacecom has a 45 percent share of the world market for power amplifiers. In numerous communications satellites Tesat-Spacecom TWTAs have now accumulated 10 million operating hours in space without failure. TWTA lifetimes of up to 15 years are usual. Travelling Wave Tube Amplifier 86 8 < The TWTA is a key element for a satellite transponder. Tesat- Spacecom has provided TWTAs which satisfied requirements of NASA, ESA, Intelsat, Inmarsat, European, Asian and US commercial programs. Starting from frequencies at 1.5 GHz up to 60 GHz, Tesat-Spacecom has TWTAs on hand with RF output power ranges from 10 W up to 450 W. High efficiency is required in order to optimize RF output phase distortion and high linearity shall be combined with straight forward mechanical design which results in low mass and small dimensions. The TWTA consists of the Travelling Wave Tube (TWT) mainly determining the RF performance and the Electronic Power Conditioner (EPC), designed and manufactured by Tesat-Spacecom, for power matching of the DC and bus interfaces. The Tesat-Spacecom EPC is designed to be integrated with any TWT of the different TWT manufacturers by optimizing the high voltages for the individual approaches. The integration of the TWT and EPC as well as the testing of the TWTA are performed by Tesat-Spacecom. Eurasiasat Ku-Band TWTA power and heat dissipation. The RF performance characteristics such as high gain, gain flatness, low Based on the technology of the current TWTA programs, Tesat- Spacecom has developed a new line of EPCs. The family now covers the RF output power range from 10 W up to 150 W. The EPCs are comprehensively qualification tested for quite a number of applications.

7 Tesat-Spacecom EPC family ATC-EPC with TWT ATC-L EPC Dual TWTA The dual EPC is capable to operate two TWTs up to 150 W simultaneously. The two TWTs can be operated as single TWTAs independently or RF combined in order to provide 290 W of RF output power from radiation cooled or conduction cooled TWTs. 7 MPM The Microwave Power Module (MPM) is a compact amplifier consisting of our advanced technology Electronic Power Conditioner with integrated Tesat-Spacecom Channel Amplifier (CAMP) and Tesat-Spacecom Linearizer (LIN). It provides many advantages as savings in mass, mounting area and simplification in payload integration, as well as better EMC characteristics and only one unique connection to the EPC for DC and all TC/TM functions of the MPM. Also available as Dual MPM. Dual TWTA Dual MPM

8 > Tesat-Spacecom has an extensive experience in the field of satellite filters. A multitude of input and output multiplexers and filters from L- to Ka-Band have been designed, manufactured and qualified in various programs in the last 30 years. Individual designs to customer requirements using advanced CAD tools and dedicated manufacturing facilities. Filters and Multiplexers 8 10 <! Tesat-Spacecom has excellent inhouse computer programs for the design of all kinds of filters such as Tchebyscheff, elliptic function, pseudoelliptic function, and linear phase (self equalized) asymetrical characteristic, and for the effective simulation and optimization of multiplexers. All necessary space qualified manufacturing processes including EDM (Electrical Discharge Machining), silver plating and soldering facilities are available at Tesat-Spacecom for the production of the flight hardware. All tests are performed in the test area fully equipped with thermal vacuum and vibration test facilities, high and low power computer-controlled test benches. The main features of the Tesat- Spacecom Input Multiplexers are: Applications in L, S, C, X, Ku-, Ka-Bands Large number of channels per multiplexer Space-qualified and flight proven designs Superior performance Excellent temperature stability Quasi-elliptic filter functions Selfequalized or external equalization Very low losses due to high practical Q factor Large variety of useful channel bandwidth Prediction and control of higher modes Compact design Input Multiplexers and Multiplexer Assemblies The function of an input multiplexer (IMUX) is to separate the individual channels out of the incoming broadband signal. Highly demanding requirements of the electrical performance have to be met by the input multiplexers. Also available as Input Multiplexer Assemblies including switches, low-pass filters, hybrids, circulators, isolators etc. Output Multiplexer and Multiplexer Assemblies Tesat-Spacecom has excellent facilities to design and manufacture microwave output multiplexers. These multiplexers are always critical components as far as loss, mass and volume are concerned. Their function is to combine the power signals coming from the power amplifiers and to feed the antenna network.

9 Main features of the Tesat- Spacecom Output Multiplexers are as follows: Combline, herring bone and mixed configurations Heritage with assemblies with aluminium and honeycomb base plate Designs available for L, S, C, X, Ku-, and Ka-Bands Variety of filter grade and functions available Contiguous, noncontiguous, and quasi-contiguous filter characteristics Inhouse developed RF simulation and optimisation software tools provide exact full wave modelling including influence of tuning screws and accurate prediction of higher order modes No breadboarding required Simulation capability up to 32 channels Realisation of 14 channel multiplexers in C-Band and 18 channels in Ku-Band Full band multiplexing: 2 GHz in Ku-Band and 800 MHz in C-Band Multiplexing with non-monotonic channel sequence to simplify waveguide routing Thinwall INVAR waveguide filter technology Fully integrated subsystems available (incl. isolators and switches) for optimum RF performance Full RF, mechanical, and thermal custom design and layout capability Koreasat 3 Ka-Band Input Multiplexer Intelsat 805/806 C-Band output multiplexer assembly 9

10 > Filters and Passive Components <! Receive/Transmit Band Diplexers Satellite antenna feed systems are generally exposed to extreme environmental conditions as for example temperatures ranging from 120 C to +140 C. Especially for such applications, Tesat-Spacecom has established a unique high performance diplexer approach for separation of the receive and transmit bands each served by one polarisation of a common antenna. The design is based on a completely integrated unit comprising a high pass and a corrugated low pass filter that are directly interconnected with a sophisticated broadband waveguide branching. This integrated approach allows the realisation of the diplexer by stateof-the-art CNC milling techniques from silverplated aluminium. Ka-Band Diplexer Tuning is avoided to cope with the inherent demands for feed system applications, namely low insertion loss (<0.15 db), good matching properties (<26 db), high receive/transmit band isolation, flat amplitude and group delay response and high power handling capability. Passive Components for Space Applications Tesat-Spacecom s passive component product scope is rounded up by components for communication satellite payloads and higher level integrated subassemblies or stand-alone units. The products include ferrite devices, couplers, power combiners and splitters, transitions and low/high power terminations for L, S, C, X, Ku- and Ka-Bands. Passive Components for Space Applications

11 Microwave Switches 11 Tesat-Spacecom switch family Tesat-Spacecom also manufactures and supplies waveguides switches operating in the range from 4 to 40 GHz for redundancy switch matrices in satellite payloads. The main features of the Tesat-Spacecom switches are: Optimum RF performance Covering C, X, Ku-, Ka-Band C-type and R-type switches Single switches, switch blocks and switch matrices Sequential access actuators with high torque margin Magnetically latching in every position Mechanically simple design with minimum number of piece parts Highest switching reliabilty (life test up to 280,000 actuations under extreme conditions) RF power handling capability (up to 1400 W in Ku-Band) High level vibration and shock load capability (up to 70 grms) Reed switch telemetry TM/TC interface with 9-pin connector

12 > Microwave Solid-state Equipment for Space Applications X-Band Modulator Tesat-Spacecom supplies a wide spectrum of microwave solid-state equipment in frequency ranges from 1 GHz up to 30 GHz. Core products are linearizers, channel amplifiers, modulators and demodulators. The equipment is designed for applications where high reliability is required, corresponding to an orbital lifetime from 7 up to 15 years, which is proven in several satellite programs e. g. ECS, TV-Sat, DFS, Intelsat and Inmarsat ! The concept of modular design used in these equipment allows a high degree of flexiblity and custom design capability for particular technical requirements. The microwave modules are realized in MIC and MMIC technologies, whereas the regulators and control circuits are assembled on PCBs. The MIC and PCB circuits are manufactured by Tesat-Spacecom in accordance with ESA and NASA standards. PPF Ka-Band Modulator

13 Optical Terminals for Inter-Satellite Links 13 LEO satellite system with optical inter-satellite links Tesat-Spacecom Coherent Laser Communication Terminals for Intersatellite Links (ISL) are the result of more than a decade of development expertise in the field of free space optical communications and Tesat-Spacecom s broad knowledge of commercial space systems production. The terminal form is a coherent, high data rate communication system with homodyne receivers operating at 1064 nm. They provide user data rates of up to 10 Gbps duplex ample link margins interruption free communication even during sun pointing immunity to commercial space vehicle micro-vibrations high operational flexibility low mass and small dimensions simple integration on space vehicle good reliability for extended lifetime The Tesat-Spacecom Coherent Laser Communication Terminal (CLT) product family for LEO-LEO and GEO-GEO commercial ISL applications derives its high-grade maturity from proven and extensive European precursor activities in the field of optical communications. Direct advantage has been taken of the current Tesat-Spacecom optical terminal development programs of the German National Space Agency (DLR-LCT) and the European Space Agency ISL-TFE program for the development of an ISL optical receiver frontend. These activities led to the current world-class-best modular product family optimized for customized commercial applications. Space qualification and production start for LEO-LEO terminals is scheduled for the year 2002.

14 > Future Developments V-Band 60 GHz TWTA Technical characteristics: Frequency range: 59 to 64 GHz RF output power: <25 W Input voltage: 50/70/100 V DC input power: 70 W DC output power (EPC): 62 W Efficiency (EPC): 91 % Cathode voltage (max): 20 kv Dimension (w/o TWT): 296x90 x135 mm 3 Mass: EPC: <2300 g, TWT: <1200 g X-Band Modulator/Transmitter (XTRA) Technical characteristics: Frequency Range: 7.2 to 8.5 GHz Modulation: BPSK/QPSK/O-QPSK Encoding Differential (configurable) Data Rate: 700 MBps max Phase Imbalance: < 4 Deg. pp Amplitude Imbalance: < 0.4 db pp Symbol Transition Time: < 300 psec Duty Cycle (Symbol) 48% to 52% Output Power: XMOD 10 to +0 dbm commandable XTRA 3 Watt Carrier Frequency 7.2 GHz to 8.5 GHz Commandable Synthesizer Bandwidth 500 MHz Frequency Resolution 5 MHz Frequency Stability: +1 ppm vs. temp. ±5 ppm over 5 years Mass XMOD 650 gramm, XTRA 950 gramm Volume: XMOD 165x7x40 mm (0,5 ltr.) XTRA 165 x 75 x 55 mm (0,7 ltr.) Power Consumption: XMOD 7 Watt, XTRA 23 Watt Data Interface I/Q Data + Clock or 8 Bit Parallel + Byte Clock Main Bus Voltage 21 Volt to 35 Volt

15 Parts Procurement Agency Active phased-array antennas Based on its extensive experience with a variety of components, Tesat-Spacecom is well qualified to tackle any space parts engineering and procurement job A major factor in planning and implementing space projects successfully is to select and procure the optimum electronic components. Tesat-Spacecom s in-house Hi-Rel parts procurement department carries out the selection, specification, most economic procurement, approval and supply of all Hi-Rel parts for Tesat- Spacecom space projects. In addition to covering its own needs, Tesat-Spacecom offers this service to other companies as a procurement agent service. Tesat-Spacecom has acted as central parts procurement agent for numerous space projects of which the most recent projects are the European Robotic Arm, Meteosat Second Generation and the Columbus Orbital Facility. Our service bundles the products that are available on the world market in a parts procurement system that is geared to our customers requirements and can cope with tasks of all kinds and sizes. Tesat-Spacecom has gained excellent knowledge of part types, their performance and technologies from extensive procurement activity on the world market. This is rounded off by our outstanding know-how and connections with the Hi-Rel component market. Tesat-Spacecom s parts procurement department has been in operation without interruption since 1972: Procurement for more than 90 projects, including 10 complete projects, and more than 30 as a procurement agent, with over 14,000 different lots and 8 million piece parts being procured. Parts have been procured from 42 European, 77 US and 3 Japanese manufacturers.

16 Tesat-Spacecom GmbH & Co. KG Gerberstraße 49 D Backnang Germany Tel +49 (0) Fax +49 (0) Our Representative in the USA and Canada: Peter Lüst Electronic Note Space Systems 300 Esplanade Drive, 9th floor, Suite 900, Oxnard, California 93030, USA Telephone Telefax This publication is issued to provide outline information only which (unless agreed by Tesat-Spacecom in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Tesat-Spacecom reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. Tesat-Spacecom Alll rights reserved. Code: TE1001 Printed in Germany