Serie NW - Acoustic Wave. Option list. Applications / Overview

Transcription

1 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Table of contents Page Applications / Overview Overview / Function P Mounting P Remote control P Technical Data P P Transducer selection P NW 000 Integral P NW 000 Smart P NW 000 / NW 00 Remote P NW 000 / Option P1 Accessories P1 Dimensions P1 Spare parts P0 Subject to technical change. All dimensions in mm (inches). We assume no liability for typing errors. Valid from until unless otherwise agreed. By publishing this option list all other option lists become invalid. Different variations to those specified are possible. Please contact our technical consultants. ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P 1

2 1 Nivowave Applications / Overview The Nivowave is a non intrusive acoustic wave measurement system. It is used for level monitoring of solids and liquids. The Nivowave system is normally mounted at the top of the silo or tank. A selection of fields of applications and industries: Water / Waste water: Inlet screens, sumps, pump stations, water towers, dam level, chemical, open channel flow etc. Level measurement in solids Continuous level measuring system Series NW - Acoustic Wave Mining: Crushers, surge bins, ore passes, conveyor profile, blocked chute, stockpile, stackers, reclaimers, storage silos etc. Powers stations: Boiler bunkers, raw coal bunkers, ash pits, fly ash silos, etc. Food Plastics Chemicals Irrigation Cement Grain Paper Quarries Standard Series with horn for high performance in complex solid applications Integral NW 000 series Smart NW 000 series Remote NW 00 series (Transducer) With display and programming buttons implemented Without display and programming buttons. Programmable with Nivowave PC-Software NW 001 (Level controller) Light series without horn for easy solid measurements in small vessels Integral NW 000L series Smart NW 000L series With display and programming buttons implemented Without display and programming buttons. Programmable with Nivowave PC- software ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com page P pl00 NW

3 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Overview / Function Level measurement in liquids Light series without horn for normal liquid applications Integral NW 000L series Smart NW 000L Series With display and programming buttons implemented Without display and programming buttons. Programmable with Nivowave PC- software Standard Series with horn for high performance in complex liquid applications Integral NW 000 series Smart NW 000 series With display and programming buttons implemented Without display and programming buttons. Programmable with Nivowave PC- software Function The Nivowave emits a high powered acoustic wave transmit pulse which is reflected from the surface of the material being measured. The reflected signal is processed using specially developed software to enhance the correct signal and reject false or spurious echoes. The transmission of these high powered waves ensures minimal losses through the enviroment where the sensor is located. Due to the high powered emitted pulse, any losses have a far less effect than traditional ultrasonic devices. More energy is transmitted hence more energy is returned. The receiver circuitry is designed to indentify and monitor low level return signals even when noise levels are quite high. The measured signal is temperature compensated to provide maximum accuracy to the outputs and display. Advantages Large selection of transducers. No contact between the tranducer and the material. Suitable for measuring many different applications. Easy to calibrate and commission. Wireless monitoring and programming with GSM possible. ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P

4 1 Nivowave Mounting Transducer mounting Mounting position Continuous level measuring system Series NW - Acoustic Wave Selecting a suitable position to mount the transducer on the vessel is the most important step. Please read the following installation guide and contact your representative if you have any doubts or questions. A clear line of sight from the transducer to the product being monitored is preferred. First priority is to keep the transducer away from fill pipes, ladders, beams etc. Normal measurement of solids does NOT require aiming to the material angle of repose. Aiming the Transducer to the material angle of repose is only in seldom cases necessary. It is required, if any ladders, beams etc cause wrong echoes. In this case, use the Aiming kit to blank these wrong echoes. Standard series Mounting position on top of silo Full detector Due to the high transmitted power of the transducer it is normally NOT necessary to aim the transducer to the material angle of repose. Enough echo is reflected by vertical mounting. Filling pipe Ideal mounting position for Nivowave Nozzle Horn The horn must protrude at least 0mm (") into the vessel. See in table on page P1 the dimension "B" of the horn. Use this value as a reference to define the max. height of the nozzle. Option: Aiming kit For aiming the Transducer in the application. Necessary only in case of wrong echoes caused by ladders, beams and other fixtures in the vessel. Normal measurement of solids does NOT require aiming to the material angle of repose. The Aiming kit is optionally available to the straight Tansducer fixing, which is delivered as standard. Light series The face (membran) of transducer must extend at least mm (0.") into the vessel. See dimension on page P1. Vertical mounting of transducer ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com page P pl00 NW

5 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Remote Control Remote Control via Modbus PK Terminal Box including Termination Resistor PK PK Terminal Box Modbus NW 000 Series Integral NW 000 Series Smart NW 00 Series Transducer NW 001 Level Controller PK Terminal Box including Biasing Network PK PK Terminal Box only one Modbus master for permanent operation Nivowave PC-Software Programming, diagnosis, display of level measurement. Remote worldwide. GSM-Modem NW 000 Wireless connection to Nivowave PC-Software. Nivowave PC-Software Programming, diagnosis, display of level measurement. Connection with Nivowave PC-Converter, interface USB-RS. Touchscreen NT 00 Visualisation of level measurement (panel mounting, see Nivotec). ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P

6 1 Nivowave Technical Data Continuous level measuring system Series NW - Acoustic Wave Series Type NW..0 NW..0 NW..1 NW.. NW..0 NW..0L NW..0L NW..0L Blanking distance (min.) 0.m (1") 0.m (1") 0.m (") 1.0m (") 1.m (") 0.m (") 0.m (") 0.m (1") Max. process temperature NW 00 NW 000 / NW 000 Max. housing temperature Min. temperature Standard series NW 00 / NW 000 / NW C (+1 F) / + C (1 F) / + C (0 F) +0 C (+1 F) / + C (1 F) +0 C (+1 F) -0 C (-0 F) Light series NW 000L / NW 000L - + C (+1 F) +0 C (+1 F) -0 C (-0 F) Max. over pressure 0.1bar (1.psi) 1bar (1psi) Frequency 0 khz 0 khz 1 khz khz khz 0 khz 0 khz 0 khz Process connection Thread DIN / ANSI " " " Flange DIN / ANSI DN0 / " DN0 / " DN / " DN / " DN00 / " DN00 / " DN00 / " DN0 / " DN0 / " Communication NW 000 NW 000 NW 000 Power supply NW 000 NW 000 NW 000 Material Sensor Housing Flange Cone Typical applications Modbus, HART, -0mA, Profibus DP, relays Modbus, -0mA, 1 relay Modbus, HART, -0mA, relays -0V DC, 0-0V AC -V DC -0V DC, 0-0V AC polyolefin, teflon or titanium face plastic PC / plastic Valox U polypropylene ( C) / carbon ( C) polypropylene or polyurethane ( C) / carbon ( C) liquids, powder, pellets, solids - Modbus, -0mA, 1 relay Modbus, HART, -0mA, relays - -V DC -0V DC, 0-0V AC teflon face plastic PC / plastic Valox U - - liquids, clean granular page P ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW

7 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Transducer Selection guide Transducer selection by applications The following graphic is a guideline for the selection of the right transducer depending on the application. Anyway it is recommended to contact the local distributor to ensure a proper transducer selection fitting to the individual application. Liquids waveless x o ripply x o Solids granular x o powder x o Degree of difficulty 1 Max. measurement distance Note: x Normal measurement o Measurement also during filling process or with strongly absorbent surface (e.g. cellulose, wood chips, foil snippet, foam formation) Measurement distance >m ( ft) on request Degree of difficulty Transducer ratings Light Series Standard Series Frequency Min. Blanking Distance Measurement Accuracy at ideal conditions (of adjusted range) Beam Angle Number of pulses per minute /-Wire V DC/ 0V AC -Wire ma -Wire 0mA NW...0L 0kHz 0, m ( ) +/- 0,%. 0 0 NW...0L 0kHz 0,0m ( ) +/- 0,%. 0 0 NW...0L 0kHz 0,m (1 ) +/- 0,%. 0 0 NW...0 0kHz 0, m (1 ) +/- 0,% 0 0 NW...0 0kHz 0,m (1 ) +/- 0,% NW...1 1kHz 0,0m ( ) +/- 0,% 0 0 NW... khz 1,0m ( ) +/- 0,% 0 NW...0 0kHz 1,m ( ) +/- 0,% 0 0, 1 ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P

8 1 Nivowave NW 000 / NW 000L Integral NW 000 series Continuous level measuring system Series NW - Acoustic Wave NW 000L series Cable entries: /-wire: M1 x 1. (x screwed cable gland + 1x blind plug) -wire: M1 x 1. (1x screwed cable gland + x blind plug) Dimensions see page P1 page P ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW

9 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave NW 000 / NW 000L Integral pos. 1 Basic type A NW 00L 0 khz B NW 00L 0 khz C NW 00L 0 khz D NW 00 0 khz E NW 00 0 khz F NW 01 1 khz G NW 0 khz H NW 00 khz A B C D E F G H pos. Process temperature Sensor face 1 max. +0 C (+1 F) in dry and condensed atmosphere Polyolefin max. + C (+1 F) in dry, wet and steamy atmosphere Teflon pos. Electronic module A -wire, -0V DC, -0mA B -wire, -0V DC, -0mA, HART C /-wire, -0V DC, relays D /-wire, -0V DC, relays, Modbus, -0 ma E /-wire, -0V DC, relays, HART, -0mA F /-wire, -0V DC, relays, Modbus H /-wire, -0V DC, 0-0V AC, relays I /-wire, -0V DC, 0-0V AC, relays, Modbus, -0 ma K /-wire, -0V DC, 0-0V AC, relays, HART, -0mA L /-wire, -0V DC, 0-0V AC, relays, Modbus pos. Process connection Flange Cone material Ø (mm/inch) material A DN0 PN1 EN-1 PP ( ") PP B DN PN1 EN-1 PP ( ") PP C DN PN1 EN-1 PP 1 ( ") PUR D DN00 PN1 EN-1 PP 1 ( ") PP E DN00 PN1 EN-1 PP (") PUR F DN0 PN EN-1 PP (") PP G " lbs ANSI B1. PP ( ") PP H " lbs ANSI B1. PP ( ") PP I " lbs ANSI B1. PP 1 ( ") PUR K " lbs ANSI B1. PP 1 ( ") PP L " lbs ANSI B1. PP (") PUR M " 0lbs ANSI B1. PP (") PP N Thread G" BSP DIN (incl. O-ring) P Thread NPT" ANSI B Basic type NW 01 Position Further option: see page P1 0 0 Order code 1 F 0 1 E D 0 + pos.1 example code 1 measuring range see page P Transducer selection guide cone and flange in carbon for high temperature, Pos. with Pos. F,M only for PP-cones only ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P

10 1 Nivowave NW 000 / NW 000L Smart NW 000 series Continuous level measuring system Series NW - Acoustic Wave Teflon face Polyolefin NW 000L series Cable entries: M0 x 1. (1x screwed cable gland) Dimensions see page P1, 1 page P ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW

11 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave NW 000 / NW 000L Smart pos. 1 Basic type A NW 00L 0 khz B NW 00L 0 khz C NW 00L 0 khz D NW 00 0 khz E NW 00 0 khz F NW 01 1 khz G NW 0 khz H NW 00 khz A B C D E F G H pos. Certificate 0 CE W ATEX II 1D and 1/D pos. Process temperature Sensor face 1 max. +0 C (+1 F) in dry and condensed atmosphere Polyolefin max. + C (+1 F) ( C for ATEX) in dry, wet and steamy atmosphere Teflon pos. Electronic module P -wire, -V DC, -0mA Q /-wire, -V DC, 1 relay, Modbus R /-wire, -V DC, 1 relay, Modbus, -0 ma pos. Process connection Flange Cone suitable for flange material Ø (mm/inch) material A DN0 PN1 EN-1 PP ( ") PP B DN PN1 EN-1 PP ( ") PP C DN PN1 EN-1 PP 1 ( ") PUR D DN00 PN1 EN-1 PP 1 ( ") PP E DN00 PN1 EN-1 PP (") PUR F DN0 PN EN-1 PP (") PP G " lbs ANSI B1. PP ( ") PP H " lbs ANSI B1. PP ( ") PP I " lbs ANSI B1. PP 1 ( ") PUR K " lbs ANSI B1. PP 1 ( ") PP L " lbs ANSI B1. PP (") PUR M " 0lbs ANSI B1. PP (") PP N Thread G" BSP DIN (incl. O-ring) P Thread " NPT ANSI B pos. Cable length A m B 1m C 0m D 0m Z Junction box with cable gland Further option: see page P1 Basic type Position 1 Order code NW 0 G 0 R D B + pos.1 example code 1 measuring range see page P Transducer selection guide for PP-cones only standard units with potted cable encapsulated with bend protection, junction box for Light units only observe accessories for appropriate mounting (cabeling and UV protection) ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P

12 1 Nivowave NW 00 / NW 000 Remote NW 00 series Continuous level measuring system Series NW - Acoustic Wave Teflon face Polyolefin NW 000 series Cable entries: /-wire: M1 x 1. (x screwed cable gland + 1x blind plug) -wire: M1 x 1. (1x screwed cable gland + x blind plug) Dimensions see page P1, 1 page P ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW

13 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave NW 00 / NW 000 Remote NW 00 pos. 1 Basic type D E F G H pos. Certificate 0 CE W ATEX II 1D and 1/D D NW 0 0 khz E NW 0 0 khz F NW 1 1 khz G NW khz H NW 0 khz pos. Process temperature Sensor face 1 max. +0 C (+1 F) in dry and condensed atmosphere Polyolefin max. + C (+1 F) ( C for ATEX) in dry, wet and steamy atmosph. Teflon max. + C (+0 F) in dry, wet and steamy atmosphere Titanium pos. Process connection Flange Cone suitable for flange material Ø (mm/inch) material A DN0 PN1 EN-1 PP ( ") PP B DN PN1 EN-1 PP ( ") PP C DN PN1 EN-1 PP 1 ( ") PUR D DN00 PN1 EN-1 PP 1 ( ") PP E DN00 PN1 EN-1 PP (") PUR F DN0 PN EN-1 PP (") PP G " lbs ANSI B1. PP ( ") PP H " lbs ANSI B1. PP ( ") PP I " lbs ANSI B1. PP 1 ( ") PUR K " lbs ANSI B1. PP 1 ( ") PP L " lbs ANSI B1. PP (") PUR M " 0lbs ANSI B1. PP (") PP pos. Cable length A m B 1m C 0m D 0m Basic type NW 0 Position Further option: see page P1 1 0 Order code E 0 0 B B + pos.1 example code 1 measuring range see page P Transducer selection guide cone and flange in carbon for high temperature, Pos. with Pos. F,M only, not for ATEX for PP-cones only observe accessories for appropriate mounting (cabeling and UV protection) NW 000 pos. 1 pos. Basic type A NW Electronic module A -wire, -0V DC, -0mA B -wire, -0V DC, -0mA, HART C /-wire, -0V DC, relays D /-wire, -0V DC, relays, Modbus, -0 ma E /-wire, -0V DC, relays, HART, -0mA F /-wire, -0V DC, relays, Modbus G /-wire, -0V DC, relays, Profibus DP 1 H /-wire, -0V DC, 0-0V AC, relays I /-wire, -0V DC, 0-0V AC, relays, Modbus, -0 ma K /-wire, -0V DC, 0-0V AC, relays, HART, -0mA L /-wire, -0V DC, 0-0V AC, relays, Modbus M /-wire, -0V DC, 0-0V AC, relays, Profibus DP 1 Basic type Position NW 001 A 0 0 Order code 1 1 GSD file read only ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P 1

14 1 Nivowave NW 000 / Option Continuous level measuring system Series NW - Acoustic Wave NW 000 Enables wireless control to a remote PC in combination with the Nivowave PC-Software. Cable entries: M0 x 1. (1x screwed cable gland) M1 x 1. (1x screwed cable gland) Dimensions see page P1 pos. 1 pos. pos. Basic type A NW A B Power supply -0V DC -0V DC, 0-0V AC Network type 1 Frequency 00/0 MHz / 00 Baud (for USA) Frequency 00/0 MHz / 00 Baud (for Europe) Basic type NW 000 Position A 1 Order code Option pos. 1 Aiming flange for NW 000, NW 000 and NW 00 Additional aiming function in flange integrated Necessary only in case of wrong echoes caused by unfavourable mounting position, beams and other fixtures in vessel. For PP-cones only. Flange size DN0 PN1 / ANSI " lbs DN PN1 / ANSI " lbs DN00 PN1 / ANSI " lbs DN0 PN1 / ANSI " lbs ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com page P 1 pl00 NW

15 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Accessories Nivowave PC-Software Software for programming, diagnose and display of level measurement. Connection via RS (Modbus) to PC. Nivowave PC-Converter or GSM Modem NW 000 required. Delivery with Nivowave units only. nw Nivowave PC-Converter USB to RS ( Modbus) converter Modbus converter for connecting of a PC with NW000 / NW000 / NW000 series Package Content USB to Modbus converter, USB cable SubD -pin female bare end for connection to Nivowave units, driver disc for WinSE/000/XP nw Overview of mounting accessories Protection hose Terminal box PK1/PK Mounting Plate PK Hose conduit UV protection cover Extension cable ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P 1

16 1 Nivowave Accessories Continuous level measuring system Series NW - Acoustic Wave Terminal Box PK1 For extension of the connection cable of NW 00, NW 000, NW 000L series. Terminals integrated, ingress protection IP, cable glands: pieces M1x blind plug Including Mounting Plate PK or PK ATEX Dimensions: PK1: 10mm x 10mm (.1" x.1") PK1 ATEX: mm x mm (." x.") PK PK1 ATEX (ATEX II D certificate for installation in ATEX Zone 1) Modbus Terminal Box PK For installing a Modbus network with the Nivowave units. Terminals integrated, ingress protection IP, cable glands: pieces M1x blind plug NOT including PK / PK / PK Dimensions: PK: 10mm x 10mm (.1" x.1") PK ATEX: mm x mm (." x."). PK PK ATEX (ATEX II D certificate for installation in ATEX Zone 1) Mounting Plate PK Used for mounting the Terminal box PK directly on the flange of the transducers PK (fitting to PK) PK ATEX (fitting to PK ATEX) Extension cables / cable protection Shielded cable - UNITRONIC LiYCY x0. Functionality up to 0m. em Twisted pair cable - conductor shielded instrument cable Functionality up to 00m. em Protection hose For installation of transducer cable or modbus cable in ATEX Zone 1 em Threaded hose coupling With thread M1x1,. Fitting to above mentioned protection hose. Applicable for ATEX Zone 1. em UV protection cover For installation of ATEX transducers in the sun With connection thread M1x1, for mounting the threaded hose coupling zu000 (for sensor with 0kHz) zu000 (for sensor with 0kHz) zu001 (for sensor with 1kHz) zu00 (for sensor with khz) zu000 (for sensor with khz) ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com page P 1 pl00 NW

17 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Accessories Flange seal Seal for mounting Nivowave unit on flange provided upon measuring point. Material: neoprene ( C), viton ( C) Article No. suitable for flanges max. temp suitable mounting kit DIN ANSI di00 DN0 PN1 and " lbs + C (1 F) zu0 zu di01 DN PN1 and " lbs + C (1 F) zu00 zu di00 DN00 PN1 + C (1 F) zu di0 " lbs + C (1 F) - zu di010 DN0 PN and " 0lbs + C (1 F) zu00 zu di0 DN0 PN and " 0lbs + C (0 F) zu00 zu Mounting Kit Bolts, washers and nuts for mounting Nivowave unit on flange provided upon measuring ponit (stainless steel / A) Article No. material bolts washers nuts zu0 stainless steel / A pieces M1x0 1 pieces pieces zu00 stainless steel / A pieces M0x0 1 pieces pieces zu00 stainless steel / A pieces M0x0 pieces pieces Modbus Biasing Network PK Stabilizer for Modbus communication. Supports the needed Biasing voltages to ensure a proper function in a network with long installed cables. Implements the needed termination resistor for the beginning of the Modbus network. To be connected to V DC supply voltage. DIN Rail mounting. Can be placed in the PK Terminal box or in a cabinet. PK Modbus Termination Resistor PK 0 Ohms resistor for the end of the Modbus network. DIN Rail mounting. Can be placed in the PK Terminal box. PK Modbus Terminal Clamps PK Used for wiring a Modbus network inside the terminal compartment of the NW 001. Dimensions: 1x1x0mm (0.x0.x0.") 1 Set includes terminals (needed for one NW 001) PK ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P 1

18 1 Nivowave Dimensions Standard series Continuous level measuring system Series NW - Acoustic Wave Integral NW 000 series Smart NW 000 series Remote NW 00 series Integral NW 000 series Smart NW 000 series Remote NW 00 series Selected Flange NW 00 NW 00 NW 0 DN0 / " DN / " NW 00 NW 00 NW 0 DN0 / " DN / " NW 01 NW 01 NW 1 DN / " DN00 / " DN0 / " NW 0 NW 0 NW DN00 / " DN00 / " DN0 / " NW 00 NW 00 NW 0 DN00 / " DN0 / " A B C E mm inch mm inch mm inch mm inch (1) 1 1 (1) (1)..... (1).... (1).. (1) Note: (1) Flexible polyurethan horn is used, which can be folded together to fit in the mounting nozzle page P 1 ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW

19 Nivowave Continuous level measuring system 1 Serie NW - Acoustic Wave Dimensions Light series Integral NW 000L series Smart NW 000L series Level controller NW 001 GSM Modem NW 000 Flanges NW flanges Lk D d Holes fitting to mm inch mm inch mm inch number DN0 PN DN PN DN00 PN DN0 PN " bs ANSI " bs ANSI " bs ANSI " bs ANSI ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com NW pl00 page P 1

20 1 Nivowave Spare parts Continuous level measuring system Series NW - Acoustic Wave Selection of flanges and cones and aiming kits available for Nivowave units NW00, NW000 and NW000 Flanges with cones Acoustically isolated flange and cone for vertical mounting of sensors (not available for Nivowave 'Light' ) Article no. suitable for flange cone Ø Mat. Sensor 0 khz 0 khz 1 khz khz khz Flange with PP-Cone fl000 DN0 PN1 EN-1 " PP fl0 DN PN1 EN-1 " PP fl00 DN00 PN1 EN-1 " PP fl00 DN00 PN1 EN-1 " PP fl00 DN0 PN EN-1 " PP fl00 DN0 PN EN-1 " PP fl0 " lbs ANSI B1. " PP fl1 " lbs ANSI B1. " PP fl0 " lbs ANSI B1. " PP fl10 " lbs ANSI B1. " PP fl " 0lbs ANSI B1. " PP fl " 0lbs ANSI B1. " PP Flange with PUR-Cone fl00 DN PN1 EN-1 " PP fl DN00 PN1 EN-1 " PP fl0 " lbs ANSI B1. " PP fl0 " lbs ANSI B1. " PP Flange with CARBON-Cone fl0 DN0 PN EN-1 " carbon fl0 " 0lbs ANSI B1. " carbon Aiming flanges with cones Acoustically isolated flange and cone for adjustable mounting of sensors (not available for Nivowave 'Light') Article no. suitable for flange cone Ø Mat. Sensor 0 khz 0 khz 1 khz khz khz Flange with PP-Cone fl00 DN0 PN1 EN-1 " PP fl DN PN1 EN-1 " PP fl0 DN00 PN1 EN-1 " PP fl0 DN00 PN1 EN-1 " PP fl0 DN0 PN EN-1 " PP fl0 DN0 PN EN-1 " PP fl00 " lbs ANSI B1. " PP fl " lbs ANSI B1. " PP fl0 " lbs ANSI B1. " PP fl0 " lbs ANSI B1. " PP fl0 " 0lbs ANSI B1. " PP fl0 " 0lbs ANSI B1. " PP page P 0 ING. ROLF HEUN Meß- Prüf- Regeltechnik GmbH Hufeisen 1 1 Seevetal/Hittfeld Tel: 0--0 Fax: 0-- info@heun-messtechnik.com pl00 NW