Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package

Transcription

1 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION The TLC.5.. series is a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity required. These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP (AS). The lens and the viewing angle is optimized to achieve best performance of light output and visibility. PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: power Angle of half intensity: ± FEATURES Untinted non-diffused lens Utilizing ultrabright AllnGaP (AS) High luminous intensity High operating temperature: T j (chip junction temperature) up to 25 C for AllnGaP devices Luminous intensity and color categorized for each packing unit ESD-withstand voltage: up to 2 kv according to JESD22-A4-B Material categorization: for definitions of compliance please see /doc?9992 APPLICATIONS Interior and exterior lighting Outdoor LED panels Instrumentation and front panel indicators Central high mounted stop lights (CHMSL) for motor vehicles Replaces incandescent lamps Traffic signals Light guide design PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE (mcd) at (nm) at (V) at (ma) (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY TLCS5 Super red AllnGaP on GaAs TLCR5 Red AllnGaP on GaAs TLCO5 Soft orange AllnGaP on GaAs TLCY5 Yellow AllnGaP on GaAs TLCY5-ASZ Yellow AllnGaP on GaAs TLCYG5 Yellow green AllnGaP on GaAs TLCPG5 Pure green AllnGaP on GaAs ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage () V R 5 V DC forward current T amb 85 C 5 ma Surge forward current t p μs SM A Power dissipation P V 35 mw Junction temperature T j 25 C Operating temperature range T amb -4 to + C Storage temperature range T stg -4 to + C Soldering temperature t 5 s, 2 mm from body T sd 26 C Thermal resistance junction/ambient R thja 3 K/W () Driving the LED in reverse direction is suitable for a short term application Rev..8, 3-Feb-6 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

2 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCS5, SUPER RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCS5 I V mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d nm/k () In one packing unit I Vmax. /I Vmin. 2. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCR5, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCR5 I V 43 - mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d nm/k () In one packing unit I Vmax. /I Vmin. 2. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCO5, SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCO5 I V mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d -. - nm/k () In one packing unit I Vmax. /I Vmin. 2. Rev..8, 3-Feb-6 2 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

3 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCY5, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCY5 I V mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d -. - nm/k () In one packing unit I Vmax. /I Vmin. 2. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCYG5, YELLOW GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCYG5 I V mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d -. - nm/k () In one packing unit I Vmax. /I Vmin. 2. OPTICAL AND ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) TLCPG5, PURE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity () = 5 ma TLCPG5 I V mcd Dominant wavelength = 5 ma λ d nm Peak wavelength = 5 ma λ p nm Spectral bandwidth at 5 % I rel max. = 5 ma Δλ nm Angle of half intensity = 5 ma ϕ - ± 9 - deg Forward voltage = 5 ma V F V Reverse voltage I R = μa V R V Temperature coefficient of V F = 5 ma TC VF mv/k Temperature coefficient of λ d = 5 ma TCλ d -. - nm/k () In one packing unit I Vmax. /I Vmin. 2. Rev..8, 3-Feb-6 3 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

4 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) STANDARD MIN. MAX. BB CC DD 75 5 EE 2 FF GG 8 36 HH II KK LL MM 75 5 NN 2 PP QQ 8 36 RR SS TT UU Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP RED SOFT ORANGE YELLOW YELLOW GREEN PURE GREEN MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± nm. Rev..8, 3-Feb-6 4 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

5 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) yellow red super red super red red yellow _ T amb _ V F - Forward Voltage (V) Fig. - Forward Current vs. Ambient Temperature Fig. 4 - Forward Current vs. Forward Voltage.2. super red _ λ - Wavelength (nm) Fig. 2 - Relative Intensity vs. Wavelength V F - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage S rel - Relative Sensitivity ϕ - Angular Displacement super red. 742 Fig. 3 - Relative Radiant Sensitivity vs. Angular Displacement Fig. 6 - Relative Luminous Flux vs. Forward Current Rev..8, 3-Feb-6 5 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

6 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. Δλd - Change of Dom. Wavelength (nm) super red Fig. 7 - Change of Dominant Wavelength vs. Ambient Temperature I rel red λ- Wavelength (nm) Fig. - Relative Intensity vs. Wavelength 2.5 super red _ T amb Fig. 8 vs. Ambient Temperature red Fig. - Relative Luminous Flux vs. Forward Current V F - Change of Forward Voltage (mv) ma super red 5 5 ma 5 ma _ T amb - Change of Dom. Wavelength (nm) d red Fig. 9 - Change of Forward Voltage vs. Ambient Temperature Fig. 2 - Changes of Dominant Wavelength vs. Forward Current Rev..8, 3-Feb-6 6 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

7 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG red T amb Fig. 3 vs. Ambient Temperature λ - Wavelength (nm) Fig. 6 - Relative Intensity vs. Wavelength ΔV F - Change of Forward Voltage (mv) ma red ma ma T amb Fig. 4 - Change of Forward Voltage vs. Ambient Temperature Fig. 7 - Relative Luminous Flux vs. Forward Current Δλ d - Change of Dom. Wavelength (nm) red T amb Fig. 5 - Change of Dominant Wavelength vs. Ambient Temperature d - Change of Dom. Wavelength (nm) Fig. 8 - Change of Dominant Wavelength vs. Forward Current Rev..8, 3-Feb-6 7 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

8 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG T amb Fig. 9 vs. Ambient Temperature..2 yellow λ - Wavelength (nm) Fig Relative Intensity vs. Wavelength V F - Change of Forward Voltage (mv) 25 5 ma 2 3 ma 5 5 ma T amb Fig. 2 - Change of Forward Voltage vs. Ambient Temperature yellow.. 78 Fig Relative Luminous Flux vs. Forward Current d - Change of Dom. Wavelength (nm) T amb Fig. 2 - Change of Dominant Wavelength vs. Ambient Temperature d - Change of Dom. Wavelength (nm) yellow Fig Change of Dominant Wavelength vs. Forward Current Rev..8, 3-Feb-6 8 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

9 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG yellow T amb Fig. 25 vs. Ambient Temperature Wavelength (nm) Fig Relative Intensity vs. Wavelength Δλ d - Change of Dom. Wavelength (nm) 6 yellow T amb Fig Change of Dominant Wavelength vs. Ambient Temperature Fig Relative Luminous Flux vs. Forward Current Δ V F - Change of Forward Voltage (mv) ma ma 5 ma yellow T amb Fig Change of Forward Voltage vs. Ambient Temperature Δλd- Change of Dom. Wavelength (nm) Fig. 3 - Change of Dominant Wavelength vs. Forward Current Rev..8, 3-Feb-6 9 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

10 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG T amb Fig. 3 vs. Ambient Temperature λ - Wavelength (nm) Fig Relative Intensity vs. Wavelength - Change of Dom. Wavelength (nm) Δλ d T amb Fig Change of Dominant Wavelength vs. Ambient Temperature Fig Relative Luminous Flux vs. Forward Current V - Change of Forward Voltage (mv) Δ F ma 3 ma 5 ma _ T amb d - Change of Dom. Wavelength (nm) Fig Change of Forward Voltage vs. Ambient Temperature Fig Change of Dominant Wavelength vs. Forward Current Rev..8, 3-Feb-6 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

11 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG T amb Fig. 37 vs. Ambient Temperature ΔV F - Change of Forward Voltage (mv) ma 3 5 ma 2 ma T amb Fig Change of Forward Voltage vs. Ambient Temperature Δλ d - Change of Dom. Wavelength (nm) T amb Fig Change of Dominant Wavelength vs. Ambient Temperature Rev..8, 3-Feb-6 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

12 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. PACKAGE DIMENSIONS in millimeters A C R 2.49 (sphere) min. 2.9 ± ± ±.5 (5.) < ±.55 Ø 5.8 ±.5. ±.25 Area not plane Ø 5 ± technical drawings according to DIN specifications Drawing-No.: Issue: 9; nom. TAPE AMMOPACK Tape feed Adhesive tape Diodes: anode before cathode Phototransistors: emitter before collector Code 2 Identification label Reel Paper Diodes: cathode before anode Phototransistors: collector before emitter Code 2 Label C A Tape B Fig. 4 - LED in Tape Fig. 4 - Tape Direction The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: + for anode first, or - for cathode first. AS2Z and AS2Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Rev..8, 3-Feb-6 2 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

13 TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. TAPE DIMENSIONS in millimeters ± 2.7 ± ± ±.3 9 ±.5.3 ±.2 Ø 4 ± max. Quantity per: ± ± ±.7 Measure limit over 2 index-holes: ± Reel (Mat.-no. 764) Option Dim. H ±.5 mm AS 7.3 Rev..8, 3-Feb-6 3 Document Number: 8346 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9

14 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9