MiniSense 100 Analog PCB
|
|
|
- Cassandra Hopkins
- 6 years ago
- Views:
Transcription
1 Evaluation Circuit for Vibration Sensor Low Power Battery Powered LED for Trigger High Sensitivity Analog and Digital Signal Access Points The LDTC MiniSense 100 Analog PCB provides a simple way to evaluate the LDTC MiniSense 100. The unit consists of LDTC MiniSense 100, a low-power operation amplifier, comparator, and DC/DC converter, and passive components used in signal conditioning. The sensor and circuit are assembled on a double-sided PCB with test points, ON/OFF switch, and plated through holes for easy user interface. The PCB has adjustable gain and demonstrates the basic capabilities of LDTC MiniSense 100 vibration sensor. FEATURES Signal Conditioned Vibration Sensor High Pass 1.3Hz Low Pass 177Hz On Board 3.3 Battery or User Power Supply Both Analog and Digital Output APPLICATIONS Wake-up Sensor Drop Detection Sensor Flow Sensor Activity Sensor Alarm Trigger specifications CHARACTERISTIC SYMBOL MIN TYP MAX UNITS (T=25(C)) Lower Frequency f L3dB Hz Limit (-3dB Point) High Frequency f U3dB Hz Limit (-3dB Point) External Supply +V VDC Voltage Supply Current Isupply ma pin descriptions PIN NUMBER NAME DESCRIPTION 1 VDD Connect to Power Supply 2 A Analog Signal output 3 D Digital Signal output 4 GND Connect to GND **Note: when switch set to OFF, PCB uses external power if applied to (+) & (-) input pins** CHARACTERISTICS T=25(C) environmental characteristics SYMBOL MIN TYP MAX UNITS Operating Temperature TOP ºc Storage Temperature TS ºc Relative Humidity RH 0-90 %R.H 1 of 4
2 electrical schematic 2 of 4
3 electrical PCB reference electrical PCB description The impedance matching resistor, R5, in parallel with the 240pF sensor capacitance, establishes the high pass input filter at approximately 1.3Hz (f=1/2πrc). After impedance buffering the LDTC signal is DC coupled to a gain stage through a 0.7Hz high pass filter formed by C10 and R10. The amplifier gain is set by R9, R6, and the R8 potentiometer in the OP-amp s feedback loop: Gain=1+ [R9/(R8+R6)] with a max gain of 20dB, min gain of 6dB. C6 in parallel with R9 in the feedback loop form a low pass filter with a corner frequency of 177Hz. After signal conditioning the analog voltage is buffered for output and also fed into a comparator. R15 & R4 set the threshold voltage. If the amplified signal exceeds the threshold voltage, the comparator output will be pulled low through a 4.7K resistor and the PNP transistor will turn on the LED. The reference voltage, VREF, is 1.65V, or half of the internal 3.3V rail. The on board 3.3V battery and external power are converted to a 5V supply using a DC-DC converter. frequency response Minisense 100 vibration sensor frequency response MiniSense 100 Analog Rev of 4 10/21/2015
4 MiniSense 100 vibration sensor Analog PCB Acceleration Response The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering information Description Part Number MiniSense 100 Analog PCB North America Measurement Specialties, Inc Lucas Way Hampton, VA Tel: or Fax: piezo@meas-spec.com Europe MEAS Deutschland GmbH Hauert Dortmund Germany Tel: +49 (0) Tel: +49 (0) piezoeurope@meas-spec.com Asia Measurement Specialties (China), Ltd. No. 26 Langshan Road ShenZhen High-Tech Park (North) Nanshan District ShenZhen, China Tel: piezo@meas-spec.com 4 of 4
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity:
NDT1-220K Ultrasonic Transducer
Low cost ultrasonic transducer Flexible Format 3 MHz nominal center frequency High Bandwith; Low Q Performance Low Impedance The NDT1-220K element offers outstanding ultrasonic transducer performance in
Accelerometer ACH-01. Piezoelectric Accelerometer Wide Bandwidth; AC Coupled Ultra Low Power High G Ranges
Piezoelectric Accelerometer Wide Bandwidth; AC Coupled Ultra Low Power High G Ranges The ACH-01 is an inexpensive, general purpose accelerometer with outstanding performance characteristics. The use of
Linear measurement with a magnetic pole stripe (I 2 C-Mode)
Linear measurement with a magnetic pole stripe (I 2 C-Mode) KMA36 / Demo board Version: 1.0 July 2012 Please use also KMA36 white paper and KMA36 data sheet Hauert 13, D-44227 Dortmund, Germany 1 of 7
80 khz Cylindrical Ultrasound Transducer
Omni-directional Horizontal Beam Directivity Broad Bandwidth Low Resonance Q Excellent Impact Resistance Lightweight Low Cost Piezoelectric Film (PVDF) 80 khz Ultrasound Transducers offer unique advantages
P-Series Inclinometer
Single or Dual axis inclinometer Measurement range +/-5 +/-15 and +/- 45 High accuracy Digital and analogue output signal DESCRIPTION The P-Series of conductive inclinometers offers modern technology in
AccuStar Electronic Clinometer
+/-60 o total sensing range CE certified Analog, digital and PWM outputs High accuracy / low cost Lightweight and compact Rugged plastic housing DESCRIPTION The AccuStar Electronic Clinometer is an extremely
FC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable
Signal Conditioning for MEAS Pressure Sensors
INTRODUCTION Piezo resistive pressure sensors provide an analog output signal that is proportional to input pressure. The typical full scale span for this type of integrated sensor is 100 mv which is sufficient
TSYS01 Digital Temperature Sensor
High Accuracy Temperature Sensor 16/24 bit Resolution Low Power SPI/I 2 C Interface QFN16 Package DESCRIPTION The TSYS01 is a single chip, versatile, new technology temperature sensor. The TSYS01 provides
A Simple Pressure Sensor Signal Conditioning Circuit
INTRODUCTION A simple signal conditioning circuit should allow the output of the amplifier to be independent of the sensor used, providing interchangeability and high level output at very low cost. A laser
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
115 or 220 VAC line powered Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable frequency
Altitude and Airspeed Measurements Temperature Range. Range psid psig psia 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to to to 300
PC Board Mountable Pressure Sensor 0-100 mv Output Voltage Excitation Differential, Gage, and Absolute Temperature Compensated DESCRIPTION The MS4425 is a temperature compensated, piezoresistive silicon
TSYS02S Digital Temperature Sensor
High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption SDM Output representing Analogue Voltage Small TDFN8 Package DESCRIPTION The TSYS02S is a single chip,
ED-17 Serial Output Magnetic Encoder
9-bit absolute encoder Serial SSI interface IP52 sealing Ball bearing Excellent stability no optic degradation Custom housings, shafts, connectors available in most cases with little tooling costs DESCRIPTION
Instruction Manual Single and Dual Axis Inclinometer V-Series
Instruction Manual Single and Dual Axis Inclinometer V-Series Version 1.1 Hauert 13, D-44227 Dortmund, Germany 1 of 15 fax: +49-(0)231-9740-200 Table of Contents 1 Introduction...3 2 Notice...3 3 History...3
OPERATION MANUAL LDM-1000
OPERATION MANUAL LDM-1000 TE CONNECTIVITY SENSORS /// LDM-1000 OPERATION MANUAL P/N 09290100-000 REV. C 05/2016 Page 1 Table of Contents 1. Introduction...3 2. Product Specifications...3 3. Product Description...4
PIEZO FILM LAB AMPLIFIER
SPECIFICATIONS Charge or Voltage Mode Operation BNC Input and Output 0.01 to 1000 mv/pc Sensitivity Range in Charge Mode 1M to 1G Input Resistance, -40 to 40dB Gain in Voltage Mode Multi-Pole, Low-Pass
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
SPECIFICATIONS 115 or 220 VAC line powered Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable
TSYS02P Digital Temperature Sensor
SPECIFICATIONS High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption PWM Output Small TDFN8 Package The TSYS02P is a single chip, temperature sensor. It
E2-Series Inclinometer
Dual axis inclinometer Measurement range +/-5 +/-0 +/-5 and +/- 45 Analogue voltage output signal OEM module DESCRIPTION The E2- series is a biaxial inclination sensor as a pcb module for OEM use with
PSI Temperature Scanners
Networkable Voltage & Temperature Instruments Withstand 30 g and 160 db Smart Connector with Auto Sensor Discovery NetScanner Compatible DESCRIPTION The PSI 9146 and 9046-S are networkable instruments
P125 High pressure sensor
Ranges from 2000 to 7000 bar Stainless steel Robust for Fatigue testing High level output in option For static and dynamic applications Linearity up to ±0.3% F.S. DESCRIPTION The P125 is a high pressure
V-SERIES INCLINOMETER
SPECIFICATIONS Single or dual axis inclinometer Measurement range +/-5, +/-15 or +/-5 Analogue voltage or current output signal AL-housing IP 5 FEATURES Single or dual axis inclinometer Analogue voltage
KMA36 universal magnetic encoder
Absolute angle measurement (180, 360 ) Incremental linear mode 10-bit PWM output (analog) Standard Two-Wire Interface (100 khz) User programmable parameters Low power mode Sleep and automatic wake-up over
HM1500LF Relative Humidity Module
Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage supply from 4.75Vdc
XP5 Miniature pressure sensor
Absolute, sealed and gauge ranges 1 to 350 [15 psi to 5 000 psi] Titanium construction Amplified output available For static and dynamic applications Linearity up to ±0.25% FSO DESCRIPTION The XP5 miniature
ELPF Load Cell DESCRIPTION
Compact Tension/Compression Design 10 500 lbf High Level and mv Output High Stability Industry Standard Packing Resists Off Axis Load Components Full NIST Traceable 11 Point Calibration Shielded Teflon
Instruction Manual Single and Dual Axis Inclinometer P-Series
Instruction Manual Single and Dual Axis Inclinometer P-Series Version 1.2 Hauert 13, D-44227 Dortmund, Germany 1 of 16 fax: +49-(0)231-9740-200 Table of Contents 1 Introduction... 3 2 Notice... 3 3 History...
ARD154. DIN rail mountable amplifier for strain gage sensors. User s guide. User s guide ARD CONNECTING 4-WIRE SENSORS
6. CONNECTING 4-WIRE SENSORS Connections : S+ connected to module A+ S- connected to module A- Shield connected to A- or to GND of analog output Nota: A- and GND are connected together inside the module.
HS1101LF Relative Humidity Sensor
Lead free component High reliability and long term stability Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature coefficient
FC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable due
Model 140 Inline Amplifier
Model 140 Inline Amplifier Low Noise Inline Amplifier Small Rugged Package Includes Auto-Zero Function The Model 140 is a remote in-line DC amplifier designed to be used with bridgetype mv output transducers.
RF Power LDMOS Transistor High Ruggedness N--Channel Enhancement--Mode Lateral MOSFET
Preliminary Data Document Number: Order from RF Marketing Rev. 1.1, 09/2018 RF Power LDMOS Transistor High Ruggedness N--Channel Enhancement--Mode Lateral MOSFET This high ruggedness device is designed
U5700 Submersible Liquid Level Pressure Transducer
High Accuracy CE Compliant Compact Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane Jacketed Cable Gage, Sealed, Absolute,
Instruction Manual DPG-Series Inclinometer
Instruction Manual DPG-Series Inclinometer Version 1.1 Hauert 13, D-44227 Dortmund, Germany 1 of 15 fax: +49-(0)231-9740-20 Contents 1 History 3 2 General Information 3 2.1 Features 3 2.2 Type and order
LOW POWER FM IF SEMICONDUCTOR TECHNICAL DATA PIN CONNECTIONS. Figure 1. Representative Block Diagram ORDERING INFORMATION
Order this document by MC7/D... includes Oscillator, Mixer, Limiting Amplifier, Quadrature Discriminator, Active, Squelch, Scan Control, and Mute Switch. The MC7 is designed for use in FM dual conversion
Using a Linear Transistor Model for RF Amplifier Design
Application Note AN12070 Rev. 0, 03/2018 Using a Linear Transistor Model for RF Amplifier Design Introduction The fundamental task of a power amplifier designer is to design the matching structures necessary
AND8450/D. NCV7680 LED Driver Linear Regulator Performance APPLICATION NOTE
NCV7680 LED Driver Linear Regulator Performance APPLICATION NOTE Introduction The NCV7680 is an automotive LED driver targeted primarily for rear combination lamp systems. A high input voltage to this
RF Power LDMOS Transistors N--Channel Enhancement--Mode Lateral MOSFETs
Preliminary Data Document Number: Order from RF Marketing Rev. 1.0, 09/2017 RF Power LDMOS Transistors N--Channel Enhancement--Mode Lateral MOSFETs These 750 W CW transistors are designed for industrial,
HTM2500LF Temperature and Relative Humidity Module
SPECIFICATIONS Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOhms +/-1% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH
TSYS02P Digital Temperature Sensor
High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption PWM Output Small TDFN8 Package DESCRIPTION The TSYS02P is a single chip, temperature sensor. It provides
Atmel U6032B. Automotive Toggle Switch IC DATASHEET. Features. Description
Atmel U6032B Automotive Toggle Switch IC DATASHEET Features Debounce time: 0.3ms to 6s RC oscillator determines switching characteristics Relay driver with Z-diode Debounced input for toggle switch Three
SEMICONDUCTOR APPLICATION NOTE
SEMICONDUCTOR APPLICATION NOTE Order this document by AN/D Prepared by: Bill Lucas and Warren Schultz A plugin module that is part of a systems development tool set for pressure sensors is presented here.
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
115 or 220 VAC operation Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable frequency response
Characteristic Symbol Value Unit Thermal Resistance, Junction-to-Case R θjc 6 C/W
Technical Data Silicon Lateral FET, N-Channel Enhancement-Mode MOSFET Designed for use in medium voltage, moderate power amplifiers such as portable analog and digital cellular radios and PC RF modems.
RF Power LDMOS Transistors N--Channel Enhancement--Mode Lateral MOSFETs
Freescale Semiconductor Technical Data RF Power LDMOS Transistors N--Channel Enhancement--Mode Lateral MOSFETs These RF power transistors are designed for applications operating at frequencies between
Freescale Semiconductor Data Sheet: Technical Data
Freescale Semiconductor Data Sheet: Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Sensor for Measuring Absolute, On-Chip Signal Conditioned, Temperature Compensated and
MARKING DIAGRAMS Split Supplies Single Supply PIN CONNECTIONS MAXIMUM RATINGS ORDERING INFORMATION SO 14 D SUFFIX CASE 751A
The MC3403 is a low cost, quad operational amplifier with true differential inputs. The device has electrical characteristics similar to the popular MC1741C. However, the MC3403 has several distinct advantages
Data Sheet. Features. General Description. Applications. Single Stage Primary Side Regulation PFC Controller For LED Driver
General Description The is a high performance AC/DC universal input Primary Side Regulation Power Factor Controller for LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology
P SUFFIX CASE 646 Single Supply Split Supplies SO-14 D SUFFIX CASE 751A PIN CONNECTIONS
Dual Operational Amplifier and Dual Comparator The MC05 contains two differential-input operational amplifiers and two comparators, each set capable of single supply operation. This operational amplifier-comparator
KA78RL00. Adjustable Micro Power Voltage Regulator. Description. Features. Internal Block Diagram.
Adjustable Micro Power Voltage Regulator www.fairchildsemi.com Features Low Quiescent Current Low Dropout Voltage Low Temperature Coefficient Tight Line and Load Regulation Guaranteed 100mA Output Current
Enhancement Mode phemt
Freescale Semiconductor Technical Data Enhancement Mode phemt Technology (E -phemt) Low Noise Amplifier The MML09212H is a 2--stage low noise amplifier (LNA) with active bias and high isolation for use
Application Note. E2 Interface for EE03, EE07 and EE08
APPLICATION NOTE AN1611-2 Application Note E2 Interface for EE03, EE07 and EE08 Rev. 1.0 11/2016 Relevant for: This application note applies to EE03, EE07 and EE08 Introduction: The E2 interface is used
ARCHIVE INFORMATION. Cellular Band RF Linear LDMOS Amplifier MHL9236MN. Freescale Semiconductor. Technical Data
Technical Data Cellular Band RF Linear LDMOS Amplifier Designed for ultra- linear amplifier applications in ohm systems operating in the cellular frequency band. A silicon FET Class A design provides outstanding
ARCHIVE INFORMATION LOW POWER NARROWBAND FM IF
Order this document by MC6C/D The MC6C includes an Oscillator, Mixer, Limiting Amplifier, Quadrature Discriminator, Active Filter, Squelch, Scan Control and Mute Switch. This device is designed for use
ICS LOW EMI CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS180-01 Description The ICS180-01 generates a low EMI output clock from a clock or crystal input. The device uses IDT s proprietary mix of analog and digital Phase Locked Loop (PLL) technology
ARCHIVE INFORMATION. Cellular Band RF Linear LDMOS Amplifier MHL9838. Freescale Semiconductor. Technical Data MHL9838. Rev.
Technical Data Rev. 4, 1/2005 Replaced by N. There are no form, fit or function changes with this part replacement. N suffix added to part number to indicate transition to lead-free terminations. Cellular
ARCHIVE INFORMATION. Cellular Band RF Linear LDMOS Amplifier MHL9318. Freescale Semiconductor. Technical Data MHL9318. Rev.
Technical Data Rev. 3, 1/2005 Replaced by N. There are no form, fit or function changes with this part replacement. N suffix added to part number to indicate transition to lead-free terminations. Cellular
PD494 Pulse-Width-Modulation Control Circuits
PD494 Pulse-Width-Modulation Control Circuits Description The PD494 is a voltage mode pulse-width-modulation switching regulator control circuit designed primarily for power supply control. The PD494 consists
CMOS Micro-Power Comparator plus Voltage Follower
Freescale Semiconductor Technical Data Rev 2, 05/2005 CMOS Micro-Power Comparator plus Voltage Follower The is an analog building block consisting of a very-high input impedance comparator. The voltage
TP2 SWP 4.7 H. Designator LXP VOUTP NCP ENABLE J2 TP5 SWN FBN SWN D1 L2. R4 18k TP8 FBN. Figure 1. NCP5810DGEVB Schematic
NCP580D: Dual W Output AMOLED Driver Supply Evaluation Board Prepared by: Hubert Grandry Overview The NCP580D is a dual output DC/DC converter which can generate both a positive and a negative voltage.
HIGH PERFORMANCE POWER FACTOR CORRECTOR. Features
General Description The is an active power factor control IC which is designed mainly for use as a pre-converter in electronic ballast, AC-DC adapter and off-line SMPS applications.. The IC includes an
MIC833. General Description. Features. Applications. Typical Application. Comparator and Reference with Adjustable Hystersis
Comparator and Reference with Adjustable Hystersis General Description The is a micropower precision dual voltage comparator with an on-chip reference and latch. High- and low-voltage thresholds are adjusted
Precision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
TSYS02D Digital Temperature Sensor
High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption I 2 C Interface Small TDFN8 Package DESCRIPTION The TSYS02D is a single chip, temperature sensor.
MIC General Description. Features. Applications. Typical Application. 3A Low Voltage LDO Regulator with Dual Input Voltages
3A Low Voltage LDO Regulator with Dual Input Voltages General Description The is a high-bandwidth, low-dropout, 3.0A voltage regulator ideal for powering core voltages of lowpower microprocessors. The
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
RF LDMOS Wideband 2-Stage Power Amplifiers
Technical Data RF LDMOS Wideband 2-Stage Power Amplifiers Designed for broadband commercial and industrial applications with frequencies from 132 MHz to 960 MHz. The high gain and broadband performance
NUP4302MR6T1G. Schottky Diode Array for Four Data Line ESD Protection
Schottky Diode Array for Four Data Line ESD Protection The NUP432MR6 is designed to protect high speed data line interface from ESD, EFT and lighting. Features Very Low Forward Voltage Drop Fast Switching
P2042A LCD Panel EMI Reduction IC
LCD Panel EMI Reduction IC Features FCC approved method of EMI attenuation Provides up to 15dB of EMI suppression Generates a low EMI spread spectrum clock of the input frequency Input frequency range:
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet.
The MC3320/2/4 family of operational amplifiers provide railtorail operation on both the input and output. The inputs can be driven as high as 200 mv beyond the supply rails without phase reversal on the
CS PIN CONNECTIONS AND MARKING DIAGRAM ORDERING INFORMATION SO 14 D SUFFIX CASE 751A V CC. = Assembly Location
The CS3361 integral alternator regulator integrated circuit provides the voltage regulation for automotive, 3 phase alternators. It drives an external logic level N channel enhancement power FET for control
Low-Pressure Sensing Using MPX2010 Series Pressure Sensors
Freescale Semiconductor Application Note Rev 1, 05/2005 Low-Pressure Sensing Using MPX2010 Series Pressure by: Memo Romero and Raul Figueroa Sensor Products Division Systems and Applications Engineering
ARCHIVE INFORMATION. PCS Band RF Linear LDMOS Amplifier MHL Freescale Semiconductor. Technical Data MHL Rev. 4, 1/2005
Technical Data Rev. 4, 1/25 Replaced by N. There are no form, fit or function changes with this part replacement. N suffix added to part number to indicate transition to lead-free terminations. PCS Band
The LA6571 is 5-channel driver for mini disk and compact disk applications (BTL-AMP: 5CH).
Ordering number : EN7739A LA6571 Monolithic Linear IC 5CH Driver for Mini Disk and Compact Disk http://onsemi.com Overview The LA6571 is 5channel driver for mini disk and compact disk applications (BTLAMP:
PD7500 Pulse-Width-Modulation Control Circuits
PD7500 Pulse-Width-Modulation Control Circuits Description The PD7500 is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The PD7500
NSS1C201L, NSV1C201L. 100 V, 3.0 A, Low V CE(sat) NPN Transistor. 100 VOLTS, 3.0 AMPS NPN LOW V CE(sat) TRANSISTOR
NSSCL, NSVCL V,. A, Low V CE(sat) NPN Transistor ON Semiconductor s e PowerEdge family of low V CE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (V CE(sat)
CS3001 CS3002 Precision Low Voltage Amplifier; DC to 2 khz
CS300 Precision Low Voltage Amplifier; DC to 2 khz Features Low Offset: 0 µv Max Low Drift: 0.05 µv/ C Max Low Noise 6nV/ Hz @0.5Hz 0. to 0 Hz = 25 nvp-p /f corner @ 0.08 Hz Open-Loop Voltage Gain 000
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
Specification DPG-Series Inclinometer
Specification DPG-Series Inclinometer Version 1.3 Hauert 13, D-44227 Dortmund, Germany 1 of 18 fax: +49-(0)231-9740-20 Contents 1 History 3 2 General Information 3 2.1 Features 3 2.2 Type and order codes
NSS1C201MZ4, NSV1C201MZ4 100 V, 2.0 A, Low V CE(sat) NPN Transistor
NSSC2MZ4, NSVC2MZ4 V, 2. A, Low V CE(sat) NPN Transistor ON Semiconductor s e 2 PowerEdge family of low V CE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
CMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.)
DGA_MIL/A_MIL/A_MIL/A_MIL CMOS Analog Switches (Obsolete for non-hermetic. Use DGB Series as pin-for-pin replacements.) -V Input Range Fast Switching t ON : ns Low r DS(on) : Single Supply Operation CMOS
NCS MHz Voltage Feedback Op Amp
75 MHz Voltage Feedback Op Amp NCS255 is a 75 MHz voltage feedback monolithic operational amplifier featuring high slew rate and low differential gain and phase error. The voltage feedback architecture
MARKING DIAGRAMS ORDERING INFORMATION Figure 1. Representative Schematic Diagram (Each Amplifier) DUAL MC33078P
The MC33078/9 series is a family of high quality monolithic amplifiers employing Bipolar technology with innovative high performance concepts for quality audio and data signal processing applications.
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
PIN CONNECTIONS ORDERING INFORMATION PIN CONNECTIONS P SUFFIX PLASTIC PACKAGE CASE 626 D SUFFIX PLASTIC PACKAGE CASE 751 (SO 8) Inputs P SUFFIX
Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates
MUN2111T1 Series, SMUN2111T1 Series. Bias Resistor Transistors. PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
MUNT Series, SMUNT Series Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device
LOW POWER NARROWBAND FM IF
Order this document by MC336C/D The MC336C includes an Oscillator, Mixer, Limiting Amplifier, Quadrature Discriminator, Active Filter, Squelch, Scan Control and Mute Switch. This device is designed for
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
DG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
LB1939T 2 Channel H Bridge Constant Voltage/Constant Current Driver
2 Channel H Bridge Constant Voltage/Constant Current Driver Overview The is a two-phase excitation bipolar stepping motor driver that features low voltage operation, a low saturation voltage, and low power
MCR106-6, MCR Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 4 AMPERES RMS 400 thru 600 VOLTS
MCR106-6, MCR106-8 Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for high volume consumer applications such as temperature, light and speed
Reference Oscillator Crystal Requirements for MKW40 and MKW30 Device Series
Freescale Semiconductor, Inc. Application Note Document Number: AN5177 Rev. 0, 08/2015 Reference Oscillator Crystal Requirements for MKW40 and MKW30 Device Series 1 Introduction This document describes
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
HTM25X0LF Temperature and Relative Humidity Module
Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOhms +/-1% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc DESCRIPTION
RF LDMOS Wideband 2-Stage Power Amplifiers
Technical Data RF LDMOS Wideband 2-Stage Power Amplifiers Designed for broadband commercial and industrial applications with frequencies from 132 MHz to 960 MHz. The high gain and broadband performance
3.5 W (reference value) : mm 76.1 mm 1.6 mm Operating temperature Topr 20 to +85 C Storage temperature Tstg 55 to +150 C
Ordering number : EN7391 LB11651 Monolithic Digital IC PWM Input Forward/Reverse Motor Driver http://onsemi.com Overview The LB11651 is a full bridge driver that supports switching between forward and