SIVACON 8PS Busbar Trunking Systems

Transcription

1 Siemens AG 010 SIVACON 8PS Busbar Trunking Systems Introduction 1) / Introduction /6 Technical overview /8 Principles of busbar trunking planning CD-L System A 1) /9 Introduction /11 Trunking units /17 Feeder units /1 End flanges / Junction units /5 Tap-off plugs /9 Accessories BD01 System A 1) /1 Introduction / Trunking units / Junction units, feeder units /4 Tap-off units for international use /40 Ancillary equipment units for international use /4 Accessories 1) Additional information in Catalog LV 70. Siemens LV

2 D 0 1 -K B 0 1 D 0 1 D -K Siemens AG 010 Introduction Overview 7 7 B B B B I0_045 CD-L system BD01 system LD system LX system Communication-capable busbar trunking systems BD system LR system / Siemens LV

3 Siemens AG 010 Introduction Benefits $ CD-L system up to 40A The versatile busbar trunking system for area-wide power distribution to lighting systems: Versatile thanks to high degree of protection IP55 Lower planning costs through simple configuration Time-saving mounting through plug-in quick connector Variable changes of direction Optimum utilization of the busbar line through tap-off points fitted to both sides Uniform current loading of the conductors through splitting of the subsequent tap-off plugs among the individual phases Tap-off plugs allow fast and flexible load relocation Expandable functionality through DALI bus transmission directly via the busbar conductors (other bus systems on request) % BD01 system up to 160A The busbar trunking system for power distribution in the skilled trades and business: Degree of protection IP50, IP54, IP55 Flexible power supply Easy and quick planning Time-saving mounting Reliable mechanical and electrical connection technology High stability, low weight Few basic modules required Storage-friendly system Variable changes of direction Versatile tap-off units Positive opening and closing of tap-off points & BD system up to 150 A The busbar trunking system for operation in the harsh industrial world: Degree of protection IP5, IP54, IP55 Easy and quick planning Time-saving and economical mounting Reliable and safe operation Flexible modular system with simple solutions for every application Early planning of the power distribution system without exact knowledge of load locations Early readiness for operation thanks to fast and simple mounting Innovative design: No more compensation boxes to compensate elongation. Codable tap-off units and tap-off points Sealable throughout ( LD system up to 5000 A The busbar trunking system for optimized power distribution in industry: Quick and easy mounting Reliable and safe operation Space-saving, compact design up to 5000 A in one enclosure Load outgoing feeders up to 150 A Type-tested connection to distribution boards and transformers ) LX system up to 600 A The busbar trunking system for power conveyance and distribution in buildings: Quick and easy mounting Reliable and safe operation Load outgoing feeders up to 150 A Type-tested connection to distribution boards and transformers * LR system up to 60 A The busbar trunking system for power conveyance under extreme ambient conditions (IP68). Detailed information about this system is available from the Siemens branch located close to you. + Communication-capable busbar trunking systems Communication-capable function expansions for combination with known tap-off units: Can be used with the BD01, BD, LD and LX systems Uses: - Lighting control for large areas - Remote switching and signaling in the industrial sector - consumption recording of decentral power tap-off units Connection to the bus systems KNX (EIB/Instabus), AS-Interface and PROFIBUS Easy contacting of the bus cable by insulation piercing method Easy and quick planning Flexible expansions and modifications Module system Retrofitting of existing installations More information Catalog LV 70 - Busbar Trunking Systems CD-L, BD01, BD up to 150 A German: Order No. E86060-K1870-A101-A4 Englisch: Order No. E86060-K1870-A101-A Selection aid for busbar trunking systems (MobileSpice) Busway systems up to 150 A can be ordered using the selection aid. The following configurators are available: SIVACON 8PS CD-L system, A SIVACON 8PS BD01 system, A SIVACON 8PS BD system, A This selection aid can be accessed through our Mall and is also included in the catalog CA 01 on DVD. This DVD is available free of charge from your Siemens sales office. Manuals Planning with SIVACON 8PS - busbar trunking systems up to 600 A German: Order No. A5E English: Order No. A5E Leaflet For safe power flows - Busbar trunking systems SIVACON 8PS German: Order No. E1000-E8-9B-D0010 English: Order No. E1000-E8-9B-D Siemens LV /

4 Siemens AG 010 Introduction EC declaration of conformity /4 Siemens LV

5 Siemens AG 010 Introduction Siemens LV /5

6 Siemens AG 010 Technical overview Overview Busbar trunking systems Rated current Rated operational voltage 5 40 Frequency Number of active conductors Degree of protection Ambient temperature, min./max. A V AC Hz C CD-L On one-side: IP55 5/+40 40, 4, 6 NSV0_0165 On both sides:, , 4, 6 ( = enclosure) BD ( = enclosure) Up to IP55 5/+40 BDA BDC , Up to IP55-5/+40 LDA1... LDA8 LDC... LDC , or 5 up to IP54-5/+40 LXA01... LXA10 LXC01... LXC , , 4, 5, 6 ( = enclosure) Up to IP55 5/+40 LRA01... LRA9 LRC01... LRC , , 5 IP68 5/+40 NSV0_01451 NSV0_001 NSV0_00681 NSV0_0041 NSV0_0041 /6 Siemens LV

7 Siemens AG 010 Technical overview Mounting position Length Tap-off points Tap-off units Material Fire load Can be combined with communication-capable tap-off units for m kwh/m Edgewise 1.5 On one-side: every 0.5; 1 or 1.5 m On both sides: every 0.5; 1 or 1.5 m Up to 16 A Insulated Cu conductors, painted sheetsteel enclosure On one-side: 0.75 On both sides: Edgewise, flat (tap-off points downwards) On one side every 0.5 or 1 m Up to 6 A Insulated Al or Cu conductors, painted sheetsteel enclosure 0.76 Lighting control Edgewise, flat and vertical Without On two sides offset every 0.5 or 0.5 m Up to 50 A Al or Cu busbars, painted sheetsteel enclosure (without tap-off points) Lighting control, remote switching, signaling and consumption recording Horizontal, edgewise and vertical Without On one side every 1 m On two sides every 1 m Up to 150 A Insulated Al or Cu busbars, painted sheetsteel enclosure (without tap-off points) Remote switching and signaling and consumption recording Horizontal, edgewise and vertical Without On one side every 0.5 m On two sides every 0.5 m Up to 150 A Insulated Al or Cu busbars, painted aluminium enclosure (without tap-off points) Remote switching and signaling and consumption recording Horizontal, edgewise and vertical Without On one side selectable Up to 60 A Epoxy resin system, Al or Cu busbars Siemens LV /7

8 Siemens AG 010 Principles of busbar trunking planning Overview Trunking units for currents from 40 to 600 A When it comes to developing a power distribution concept complete with the configuration of systems and system components, the end user's requirements have to be coordinated with the manufacturer's possibilities. Descriptions are provided accordingly of the individual systems, their technical features and their fields of application. Another element is the graphic representation of the various busbar trunking elements. All details of importance for the planning work are emphasized and explained. You will find ideas for a ready-to-use planning solution in chapters to 5 of "Information for project planning". For example, the basics of dimensioning are presented in detail along with indepth information on topics such as system construction, shortcircuit protection, fire protection and functional maintenance. Services and engineering tools are available from Siemens to simplify the drawing up of customer specifications. General information When developing the planning concept of a power supply system it is necessary not only to consider the standards and specifications in force but also to clarify the correlations between economy and technology. Electrical equipment such as distribution boards and transformers must be dimensioned and selected so that they represent an optimum in their entirety and not just individually. All components must be sufficiently dimensioned for the loads which arise in the event of a fault as well as during operation at rated values. Other decisive points to be considered when drawing up the power concept are: The type, utilization and shape of building (e.g. high-rise, flat-roof and number of storeys) Determination of load centers and selection of possible supply routes and locations for transformers and main distribution boards Determination of building-related connected loads according to specific loads per unit area dependent on the building's use Specifications and requirements imposed by the building authorities Requirements imposed by the power supply companies The result will never be a single solution but several versions which must be assessed with regard to their technical and economic implications. The following requirements are paramount in this connection: Easy and clear-cut planning Long endurance High availability Low fire load Flexible adaptation to alterations in the building In most applications these requirements are easily met by the use of suitable busbar trunking systems. For this reason, busbar trunking systems rather than the cable installation method is being used more and more often by engineering offices for the conveyance and distribution of power. Siemens offers busbar trunking systems from 5 to 600 A: The CD-L busbar system with 5 and 40 A for supplying power to lights and miniature loads The BD01 busbar system from 40 to 160 A for supplying power to workshops with tap-off units up to 6 A The BD system from 160 to 150 A for supplying power to medium-size loads in buildings and in industry The ventilated LD system for supplying loads with medium power consumption in industry The LX sandwich system for power distribution of large amounts of power in buildings The LR encapsulated system for power conveyance in extreme ambient conditions (IP68). /8 Siemens LV

9 Siemens AG 010 CD-L System A Introduction Overview Entry feeder unit Universal suspension bracket CD-L busbar trunking unit Standard fixing bracket Flexible junction unit Cable duct Fixing bracket for cable duct Tap-off plug Fixing bracket with hook End flange Siemens LV /9

10 CD-L System A Introduction Siemens AG 010 Version Type-tested low-voltage controlgear combination (TTA) according to IEC/EN IEC/EN Degree of protection High degree of protection to IP55 of the standard version Components Trunking units Insulated circular conductors, one-sided arrangement: -, 5-, 7-conductor system Insulated circular conductors, double-sided arrangement: x, 1x 5 / 1 x, x 5 and x 7 conductor system Number and arrangement of the tap-off points: Benefits Lower planning costs through simple configuration Time-saving mounting through plug-in quick connector Outgoing points on both sides for optimized utilization of the busbar Variable change of the direction of the busbar line Uniform current loading of the conductors through splitting of the subsequent tap-off plugs among the individual phases Tap-off plugs allow fast and flexible load relocation Degree of protection to IP55 for extreme ambient conditions Length of trunking unit Number of tap-off points One-sided arrangement Double-sided arrangement Spacing of tap-off points m m 6, or (6, or ) 0.5, 1 or Plug-in connection Standard tap-off points Coded tap-off points Feeder units Entry feeder units End feeder units End flanges Junction units Flexible junction units Tap-off plugs -pole, 10 A and 16 A, Lx (phase optionally at L1, L, L ), Nand 5-pole, 10 A, L1, L, L, N, -pole + L4/L5, 10 A (N/L1, N/L or N/L) + L4/L5 + Standard and coded versions Mobile N and L contacts Accessories Fixing bracket Suspension hook Suspension bracket Cable duct Cable duct mounting Cover for tap-off point /10 Siemens LV

11 Selection and ordering data Siemens AG 010 Unpainted trunking units with uncoded tap-off points (supplied from stock) CD-L System A Trunking units G_NSV0_047 One-sided tap-off points G_NSV0_048 Two-sided tap-off points Length Conductor configuration Tap-off points DT Type Order No. Price Number Spacing 1) L4/L5 circuit: max. rated current 5 A. SET, M) m m kg Rated current I n = 5 A, one-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, uncoded tap-off points conductors 1.5 B CD-L PS0 00-BF5 1 6 units B CD-L PS0 01-BF5 1 6 units L D CD-L PS0 0-BF5 1 6 units N 1 B CD-L PS0 00-BF5 1 6 units B CD-L-15-1,5-1 8PS0 00-1BF5 1 6 units conductors 1.5 B CD-L ,5 8PS0 00-CF5 1 6 units B CD-L PS0 01-CF5 1 6 units L L L N B CD-L ,5 8PS0 0-CF5 1 6 units L1 N 1 B CD-L PS0 00-CF5 1 6 units B CD-L-154-1,5-1 8PS0 00-1CF5 1 6 units conductors 1) 1.5 B CD-L ,5 8PS0 00-DF5 1 6 units L4 1 B CD-L PS0 01-DF5 1 6 units L L L N B CD-L ,5 8PS0 0-DF5 1 6 units L1 N 1 B CD-L PS0 00-DF5 1 6 units L B CD-L-156-1,5-1 8PS0 00-1DF5 1 6 units Rated current I n = 5 A, double-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, uncoded tap-off points conductors x 1.5 B CD-L-5--1,5 8PS0 00-FF5 1 6 units x 1 B CD-L PS0 01-FF5 1 6 units L N x D CD-L-5--0,5 8PS0 0-FF5 1 6 units N L x 1 D CD-L PS0 00-FF5 1 6 units x 1 D CD-L-5-1,5-1 8PS0 00-1FF5 1 6 units conductors x 1.5 B CD-L-54/-KR--1,5 8PS0 0-GF5 1 6 units conductors x 1 B CD-L-54/-KR--1 8PS0 04-GF5 1 6 units L x B CD-L-54/-KR--0,5 8PS0 05-GF5 1 6 units L N N L L1 x 1 B CD-L-54/-KR--1 8PS0 0-GF5 1 6 units N L 1.5 x 1 D CD-L-54/-KR-1,5-1 8PS0 0-1GF5 1 6 units G_NSV0_049 G_NSV0_050 G_NSV0_051 G_NSV0_05 G_NSV0_05 5 conductors x 1.5 B CD-L-54--1,5 8PS0 00-HF5 1 6 units x 1 B CD-L PS0 01-HF5 1 6 units L L N N L L1 x B CD-L-54--0,5 8PS0 0-HF5 1 6 units L1 L N N L L x 1 B CD-L PS0 00-HF5 1 6 units x 1 B CD-L-54-1,5-1 8PS0 00-1HF5 1 6 units conductors 1) x 1.5 B CD-L-56--1,5 8PS0 00-JF5 1 6 units L4 L5 x 1 B CD-L PS0 01-JF5 1 6 units L L N N L L1 x D CD-L-56--0,5 8PS0 0-JF5 1 6 units L1 L N N L L x 1 D CD-L PS0 00-JF5 1 6 units L5 L4 1.5 x 1 B CD-L-56-1,5-1 8PS0 00-1JF5 1 6 units G_NSV0_054 G_NSV0_055 Siemens LV /11

12 CD-L System A Trunking units Siemens AG 010 G_NSV0_047 One-sided tap-off points G_NSV0_048 Two-sided tap-off points Length Conductor configuration Tap-off points DT Type Order No. Price Number Spacing 1) L4/L5 circuit: max. rated current 5 A. SET, M) m m kg Rated current I n = 40 A, one-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, uncoded tap-off points conductors 1.5 B CD-L ,5 8PS0 00-BF units B CD-L PS0 01-BF units L D CD-L ,5 8PS0 0-BF units N 1 D CD-L PS0 00-BF units D CD-L-140-1,5-1 8PS0 00-1BF units conductors 1.5 B CD-L ,5 8PS0 00-CF units B CD-L PS0 01-CF units L L L N B CD-L ,5 8PS0 0-CF units L1 N 1 B CD-L PS0 00-CF units B CD-L ,5-1 8PS0 00-1CF units conductors 1) 1.5 B CD-L ,5 8PS0 00-DF units L4 1 D CD-L PS0 01-DF units L L L N D CD-L ,5 8PS0 0-DF units L1 N 1 D CD-L PS0 00-DF units L D CD-L ,5-1 8PS0 00-1DF units Rated current I n = 40 A, double-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, uncoded tap-off points conductors x 1.5 B CD-L-40--1,5 8PS0 00-FF units x 1 D CD-L PS0 01-FF units L N x D CD-L-40--0,5 8PS0 0-FF units N L x 1 D CD-L PS0 00-FF units x 1 D CD-L-40-1,5-1 8PS0 00-1FF units conductors x 1.5 B CD-L-404/-KR--1,5 8PS0 0-GF units conductors x 1 B CD-L-404/-KR--1 8PS0 04-GF units L x B CD-L-404/-KR--0,5 8PS0 05-GF units L N N L L1 x 1 B CD-L-404/-KR--1 8PS0 0-GF units N L 1.5 x 1 D CD-L-404/-KR-1,5-1 8PS0 0-1GF units G_NSV0_049 G_NSV0_050 G_NSV0_051 G_NSV0_05 G_NSV0_05 5 conductors x 1.5 B CD-L ,5 8PS0 00-HF units x 1 B CD-L PS0 01-HF units L L N N L L1 x B CD-L ,5 8PS0 0-HF units L1 L N N L L x 1 B CD-L PS0 00-HF units x 1 D CD-L-404-1,5-1 8PS0 00-1HF units conductors 1) x 1.5 B CD-L ,5 8PS0 00-JF units L4 L5 x 1 D CD-L PS0 01-JF units L L N N L L1 x D CD-L ,5 8PS0 0-JF units L1 L N N L L x 1 D CD-L PS0 00-JF units L5 L4 1.5 x 1 D CD-L-406-1,5-1 8PS0 00-1JF units G_NSV0_054 G_NSV0_055 /1 Siemens LV

13 Siemens AG 010 Unpainted trunking units with codable tap-off points (supplied from stock) CD-L System A Trunking units G_NSV0_058 One-sided tap-off points, KR G_NSV0_064 One-sided tap-off points, KW G_NSV0_059 Two-sided tap-off points Length Conductor configuration Tap-off points DT Type Order No. Price Number Spacing SET, M) m m kg Rated current I n = 5 A, one-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, coded tap-off points KR, 1.5 D CD-L-154-KR--1,5 8PS0 10-CF5 1 6 units conductors 1 D CD-L-154-KR--1 8PS0 11-CF5 1 6 units L L D CD-L-154-KR--0,5 8PS0 1-CF5 1 6 units L N L1 1 D CD-L-154-KR--1 8PS0 10-CF5 1 6 units N 1 D CD-L-154-KR-1,5-1 8PS0 10-1CF5 1 6 units KW, 1.5 D CD-L-154-KW--1,5 8PS0 1-CF5 1 6 units conductors 1 D CD-L-154-KW--1 8PS0 14-CF5 1 6 units L L D CD-L-154-KW--0,5 8PS0 -CF5 1 6 units L N L1 1 D CD-L-154-KW--1 8PS0 1-CF5 1 6 units N 1 D CD-L-154-KW PS0 1-1CF5 1 6 units KR, 1.5 D CD-L-156-KR--1,5 8PS0 10-DF5 1 6 units conductors 1) 1 D CD-L-156-KR--1 8PS0 11-DF5 1 6 units L4 L L B CD-L-156-KR--0,5 8PS0 1-DF5 1 6 units L N L1 1 B CD-L-156-KR--1 8PS0 10-DF5 1 6 units N L5 1 D CD-L-156-KR PS0 10-1DF5 1 6 units KW, 1.5 B CD-L-156-KW--1,5 8PS0 1-DF5 1 6 units conductors 1) 1 D CD-L-156-KW--1 8PS0 14-DF5 1 6 units L5 L L B CD-L-156-KW--0,5 8PS0 -DF5 1 6 units L N L1 1 D CD-L-156-KW--1 8PS0 1-DF5 1 6 units N L4 1 D CD-L-156-KW-1,5-1 8PS0 1-1DF5 1 6 units Rated current I n = 5 A, double-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, coded tap-off points KR, x 1.5 B CD-L-54/-KR--1,5 8PS0 0-GF5 1 6 units conductors x 1 B CD-L-54/-KR--1 8PS0 04-GF5 1 6 units conductors x B CD-L-54/-KR--0,5 8PS0 05-GF5 1 6 units L L N x 1 B CD-L-54/-KR--1 8PS0 0-GF5 1 6 units N L 1.5 L1 x 1 D CD-L-54/-KR-1,5-1 8PS0 0-1GF5 1 6 units G_NSV0_060 G_NSV0_061 G_NSV0_06 G_NSV0_06 G_NSV0_05 N L KR/KW, x 1.5 D CD-L-54-KRW--1,5 8PS0 16-HF5 1 6 units conductors x 1 B CD-L-54-KRW--1 8PS0 17-HF5 1 6 units L L N x D CD-L-54-KRW--0,5 8PS0 18-HF5 1 6 units N L L1 L1 L N x 1 D CD-L-54-KRW--1 8PS0 16-HF5 1 6 units N L L 1.5 x 1 B CD-L-54-KRW-1,5-1 8PS0 16-1HF5 1 6 units G_NSV0_065 KR/KW, x 1.5 D CD-L-56-KRW--1,5 8PS0 16-JF5 1 6 units conductors 1) x 1 D CD-L-56-KRW--1 8PS0 17-JF5 1 6 units L L4 L L5 N x D CD-L-56-KRW--0,5 8PS0 18-JF5 1 6 units N L L1 L1 L N x 1 D CD-L-56-KRW--1 8PS0 16-JF5 1 6 units N L L 1.5 L5 L4 x 1 D CD-L-56-KRW-1,5-1 8PS0 16-1JF5 1 6 units G_NSV0_066 1) L4/L5 circuit: max. rated current 5 A. Siemens LV /1

14 CD-L System A Trunking units Siemens AG 010 G_NSV0_058 G_NSV0_064 G_NSV0_059 One-sided tap-off points, KR One-sided tap-off points, KW Two-sided tap-off points Length Conductor configuration Tap-off points DT Type Order No. Price Number Spacing SET, M) m m kg Rated current I n = 40 A, one-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, coded tap-off points KR, 1.5 D CD-L-1404-KR--1,5 8PS0 10-CF units conductors 1 D CD-L-1404-KR--1 8PS0 11-CF units L L D CD-L-1404-KR--0,5 8PS0 1-CF units L N L1 1 D CD-L-1404-KR--1 8PS0 10-CF units N 1 D CD-L-1404-KR-1,5-1 8PS0 10-1CF units KW, 1.5 D CD-L-1404-KW--1,5 8PS0 1-CF units conductors 1 D CD-L-1404-KW--1 8PS0 14-CF units L L D CD-L-1404-KW--0,5 8PS0 -CF units L N L1 1 D CD-L-1404-KW--1 8PS0 1-CF units N 1 D CD-L-1404-KW-1,5-1 8PS0 1-1CF units KR, 1.5 D CD-L-1406-KR--1,5 8PS0 10-DF units conductors 1) 1 D CD-L-1406-KR--1 8PS0 11-DF units L4 L L D CD-L-1406-KR--0,5 8PS0 1-DF units L N L1 1 B CD-L-1406-KR--1 8PS0 10-DF units N L5 1 D CD-L-1406-KR-1,5-1 8PS0 10-1DF units KW, 1.5 D CD-L-1406-KW--1,5 8PS0 1-DF units conductors 1) 1 D CD-L-1406-KW--1 8PS0 14-DF units L5 L L D CD-L-1406-KW--0,5 8PS0 -DF units L N L1 1 D CD-L-1406-KW--1 8PS0 1-DF units N L4 1 D CD-L-1406-KW-1,5-1 8PS0 1-1DF units Rated current I n = 40 A, double-sided tap-off points Trunking units Sheet-steel enclosure, unpainted, coded tap-off points KR, x 1.5 B CD-L-404/-KR--1,5 8PS0 0-GF units conductors x 1 B CD-L-404/-KR--1 8PS0 04-GF units conductors x B CD-L-404/-KR--0,5 8PS0 05-GF units L L N x 1 B CD-L-404/-KR--1 8PS0 0-GF units N L 1.5 L1 x 1 D CD-L-404/-KR-1,5-1 8PS0 0-1GF units G_NSV0_060 G_NSV0_061 G_NSV0_06 G_NSV0_06 G_NSV0_05 N L KR/KW, x 1.5 D CD-L-404-KRW PS0 16-HF units conductors x 1 D CD-L-404-KRW--1 8PS0 17-HF units L L N x D CD-L-404-KRW--0,5 8PS0 18-HF units N L L1 L1 L N x 1 X CD-L-404-KRW--1 8PS0 16-HF units N L L 1.5 x 1 D CD-L-404-KRW-1,5-1 8PS0 16-1HF units G_NSV0_065 KR/KW, x 1.5 D CD-L-406-KRW--1,5 8PS0 16-JF units conductors 1) x 1 D CD-L-406-KRW--1 8PS0 17-JF units L L4 L L5 N x D CD-L-406-KRW--0,5 8PS0 18-JF units N L L1 L1 L N x 1 D CD-L-406-KRW--1 8PS0 16-JF units N L L 1.5 L5 L4 x 1 D CD-L-406-KRW-1,5-1 8PS0 16-1JF units G_NSV0_066 1) L4/L5 circuit: max. rated current 5 A. /14 Siemens LV

15 Siemens AG 010 Painted trunking units with uncoded tap-off points (delivery on request) CD-L System A Trunking units G_NSV0_056 One-sided tap-off points G_NSV0_057 Two-sided tap-off points Length Conductor configuration 1) L4/L5 circuit: max. rated current 5 A. Tap-off points DT Type Order No. Price Number Spacing SET, M) m m kg Rated current I n = 5 A, one-sided tap-off points Trunking units Sheet-steel enclosure, painted, white (RAL 9016), uncoded tapoff points conductors 1.5 X CD-L-15--1,5-L 8PS1 00-BF5 1 6 units X CD-L L 8PS1 01-BF5 1 6 units L X CD-L-15--0,5-L 8PS1 0-BF5 1 6 units N 1 X CD-L L 8PS1 00-BF5 1 6 units X CD-L-15-1,5-1-L 8PS1 00-1BF5 1 6 units conductors 1.5 X CD-L ,5-L 8PS1 00-CF5 1 6 units X CD-L L 8PS1 01-CF5 1 6 units L L L N X CD-L ,5-L 8PS1 0-CF5 1 6 units L1 N 1 X CD-L L 8PS1 00-CF5 1 6 units X CD-L-154-1,5-1-L 8PS1 00-1CF5 1 6 units conductors 1) 1.5 X CD-L ,5-L 8PS1 00-DF5 1 6 units L4 1 X CD-L L 8PS1 01-DF5 1 6 units L L L N X CD-L ,5-L 8PS1 0-DF5 1 6 units L1 N 1 X CD-L L 8PS1 00-DF5 1 6 units L X CD-L-156-1,5-1-L 8PS1 00-1DF5 1 6 units Rated current I n = 5 A, double-sided tap-off points Trunking units Sheet-steel enclosure, painted, white (RAL 9016), uncoded tapoff points conductors x 1.5 X CD-L-5--1,5-L 8PS1 00-FF5 1 6 units x 1 X CD-L-5--1-L 8PS1 01-FF5 1 6 units L N x X CD-L-5--0,5-L 8PS1 0-FF5 1 6 units N L x 1 X CD-L-5--1-L 8PS1 00-FF5 1 6 units x 1 X CD-L-5-1,5-1-L 8PS1 00-1FF5 1 6 units conductors x 1.5 X CD-L-54/-KR--1,5-L 8PS1 0-GF5 1 6 units conductors x 1 X CD-L-54/-KR--1-L 8PS1 04-GF5 1 6 units L x X CD-L-54/-KR--0.5-L 8PS1 05-GF5 1 6 units L N N L L1 x 1 X CD-L-54/-KR--1-L 8PS1 0-GF5 1 6 units N L 1.5 x 1 X CD-L-54/-KR-1,5-1-L 8PS1 0-1GF5 1 6 units G_NSV0_049 G_NSV0_050 G_NSV0_051 G_NSV0_05 G_NSV0_05 5 conductors x 1.5 X CD-L-54--1,5-L 8PS1 00-HF5 1 6 units x 1 X CD-L L 8PS1 01-HF5 1 6 units L L N N L L1 x X CD-L-54--0,5-L 8PS1 0-HF5 1 6 units L1 L N N L L x 1 X CD-L L 8PS1 00-HF5 1 6 units x 1 X CD-L-54-1,5-1-L 8PS1 00-1HF5 1 6 units conductors 1) x 1.5 X CD-L-56--1,5-L 8PS1 00-JF5 1 6 units L4 L5 x 1 X CD-L L 8PS1 01-JF5 1 6 units L L N N L L1 x X CD-L-56--0,5-L 8PS1 0-JF5 1 6 units L1 L N N L L x 1 X CD-L L 8PS1 00-JF5 1 6 units L5 L4 1.5 x 1 X CD-L-56-1,5-1-L 8PS1 00-1JF5 1 6 units G_NSV0_054 G_NSV0_055 Siemens LV /

16 CD-L System A Trunking units Siemens AG 010 G_NSV0_056 One-sided tap-off points G_NSV0_057 Two-sided tap-off points Length Conductor configuration 1) L4/L5 circuit: max. rated current 5 A. Tap-off points DT Type Order No. Price Number Spacing SET, M) m m kg Rated current I n = 40 A, one-sided tap-off points Trunking units Sheet-steel enclosure, painted, white (RAL 9016), uncoded tapoff points conductors 1.5 X CD-L ,5-L 8PS1 00-BF units X CD-L L 8PS1 01-BF units L X CD-L ,5-L 8PS1 0-BF units N 1 X CD-L L 8PS1 00-BF units X CD-L-140-1,5-1-L 8PS1 00-1BF units conductors 1.5 X CD-L ,5-L 8PS1 00-CF units X CD-L L 8PS1 01-CF units L L L N X CD-L ,5-L 8PS1 0-CF units L1 N 1 X CD-L L 8PS1 00-CF units X CD-L ,5-1-L 8PS1 00-1CF units conductors 1) 1.5 X CD-L ,5-L 8PS1 00-DF units L4 1 X CD-L L 8PS1 01-DF units L L L N X CD-L ,5-L 8PS1 0-DF units L1 N 1 X CD-L L 8PS1 00-DF units L X CD-L ,5-1-L 8PS1 00-1DF units Rated current I n = 40 A, double-sided tap-off points Trunking units Sheet-steel enclosure, painted, white (RAL 9016), uncoded tapoff points conductors x 1.5 X CD-L-40--1,5-L 8PS1 00-FF units x 1 X CD-L L 8PS1 01-FF units L N x X CD-L-40--0,5-L 8PS1 0-FF units N L x 1 X CD-L L 8PS1 00-FF units x 1 X CD-L-40-1,5-1-L 8PS1 00-1FF units conductors x 1.5 X CD-L-404/-KR--1,5-L 8PS1 0-GF units conductors x 1 X CD-L-404/-KR--1-L 8PS1 04-GF units L x X CD-L-404/-KR--0,5-L 8PS1 05-GF units L N N L L1 x 1 X CD-L-404/-KR--1-L 8PS1 0-GF units N L 1.5 x 1 X CD-L-404/-KR-1,5-1-L 8PS1 0-1GF units G_NSV0_049 G_NSV0_050 G_NSV0_051 G_NSV0_05 G_NSV0_05 5 conductors x 1.5 X CD-L ,5-L 8PS1 00-HF units x 1 X CD-L L 8PS1 01-HF units L L N N L L1 x X CD-L ,5-L 8PS1 0-HF units L1 L N N L L x 1 X CD-L L 8PS1 00-HF units x 1 X CD-L-404-1,5-1-L 8PS1 00-1HF units conductors 1) x 1.5 X CD-L ,5-L 8PS1 00-JF units L4 L5 x 1 X CD-L L 8PS1 01-JF units L L N N L L1 x X CD-L ,5-L 8PS1 0-JF units L1 L N N L L x 1 X CD-L L 8PS1 00-JF units L5 L4 1.5 x 1 X CD-L-406-1,5-1-L 8PS1 00-1JF units G_NSV0_054 G_NSV0_055 /16 Siemens LV

17 Siemens AG 010 CD-L System A Feeder units Overview The feeder units are inserted at the beginning of a busbar line. They are available as entry feeder units and end feeder units and are connected to the corresponding end of the straight element (the entry feeder unit without a connecting flange, the end feeder unit with a connecting flange). If there are busbar elements on two sides, the two circuits are mechanically separated. Enclosure material Connection box: Thermoplast Connection point: Galvanized metal enclosure Conductor cross-sections of the terminals N/L1/L/L: Max. cable cross-section 10 mm L4/L5: Max. cable cross-section.5 mm : Max. cable cross-section 6 mm Selection and ordering data Unpainted feeder units (supplied from stock) Length Conductor configuration DT Type Order No. Price SET, M) m kg Rated current I n = 5 A, one-sided Entry feeder units unpainted (coded KR, KW) 0. conductors B CD-L-154-EA 8PS0 0-0CF5 1 1 unit L, N G_NSV0_067 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-156-EA 8PS0 0-0DF5 1 1 unit L4, L, L, L1, N, L5 End feeder units unpainted (coded KR, KW) 0. conductors B CD-L-154-EE 8PS0-0CF5 1 1 unit L, N 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-156-EE 8PS0-0DF5 1 1 unit G_NSV0_069 L4, L, L, L1, N, L5 Rated current I n = 5 A, double-sided Entry feeder units unpainted (coded KR, KW) 0. conductors B CD-L-54-EA 8PS0 1-0HF5 1 1 unit L, N G_NSV0_ conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-56-EA 8PS0 1-0JF5 1 1 unit L4, L, L, L1, N, L5 End feeder units unpainted (coded KR, KW) 0. conductors B CD-L-54-EE 8PS0-0HF5 1 1 unit L, N 1 5 conductors / G_NSV0_070 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-56-EE 8PS0-0JF5 1 1 unit L4, L, L, L1, N, L5 1) L4/L5 circuit: max. rated current 5 A. Siemens LV /17

18 CD-L System A Feeder units Siemens AG 010 m Rated current I n = 40 A, one-sided 1) L4/L5 circuit: max. rated current 5 A. Length Conductor configuration DT Type Order No. Price SET, M) Entry feeder units unpainted (coded KR, KW) 0. conductors B CD-L-1404-EA 8PS0 0-0CF unit L, N G_NSV0_067 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-1406-EA 8PS0 0-0DF unit L4, L, L, L1, N, L5 End feeder units unpainted (coded KR, KW) 0. conductors B CD-L-1404-EE 8PS0-0CF unit L, N G_NSV0_069 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-1406-EE 8PS0-0DF unit L4, L, L, L1, N, L5 Rated current I n = 40 A, double-sided Entry feeder units unpainted (coded KR, KW) 0. conductors B CD-L-404-EA 8PS0 1-0HF unit L, N G_NSV0_ conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) B CD-L-406-EA 8PS0 1-0JF unit L4, L, L, L1, N, L5 End feeder units unpainted (coded KR, KW) 0. conductors B CD-L-404-EE 8PS0-0HF unit L, N 1 5 conductors / G_NSV0_070 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) D CD-L-406-EE 8PS0-0JF unit L4, L, L, L1, N, L5 kg /18 Siemens LV

19 Siemens AG 010 CD-L System A Feeder units Painted feeder units (delivery on request) m Rated current I n = 5 A, one-sided 1) L4/L5 circuit: max. rated current 5 A. Length Conductor configuration DT Type Order No. Price SET, M) Entry feeder units painted, white (RAL 9016) 0. conductors X CD-L-154-EA-L 8PS1 0-0CF5 1 1 unit L, N G_NSV0_071 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-156-EA-L 8PS1 0-0DF5 1 1 unit L4, L, L, L1, N, L5 End feeder units painted, white (RAL 9016) 0. conductors X CD-L-154-EE-L 8PS1-0CF5 1 1 unit L, N G_NSV0_07 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-156-EE-L 8PS1-0DF5 1 1 unit L4, L, L, L1, N, L5 Rated current I n = 5 A, double-sided Entry feeder units painted, white (RAL 9016) 0. conductors X CD-L-54-EA-L 8PS1 1-0HF5 1 1 unit L, N G_NSV0_ conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-56-EA-L 8PS1 1-0JF5 1 1 unit L4, L, L, L1, N, L5 End feeder units painted, white (RAL 9016) 0. conductors X CD-L-54-EE-L 8PS1-0HF5 1 1 unit L, N 1 5 conductors / G_NSV0_074 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-56-EE-L 8PS1-0JF5 1 1 unit L4, L, L, L1, N, L5 kg Siemens LV /19

20 CD-L System A Feeder units Siemens AG 010 m Rated current I n = 40 A, one-sided 1) L4/L5 circuit: max. rated current 5 A. Length Conductor configuration DT Type Order No. Price SET, M) Entry feeder units painted, white (RAL 9016) 0. conductors X CD-L-1404-EA-L 8PS1 0-0CF unit L, N G_NSV0_071 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-1406-EA-L 8PS1 0-0DF unit L4, L, L, L1, N, L5 End feeder units painted, white (RAL 9016) 0. conductors X CD-L-1404-EE-L 8PS1-0CF unit L, N G_NSV0_07 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-1406-EE-L 8PS1-0DF unit L4, L, L, L1, N, L5 Rated current I n = 40 A, double-sided Entry feeder units painted, white (RAL 9016) 0. conductors X CD-L-404-EA-L 8PS1 1-0HF unit L, N G_NSV0_ conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-406-EA-L 8PS1 1-0JF unit L4, L, L, L1, N, L5 End feeder units painted, white (RAL 9016) 0. conductors X CD-L-404-EE-L 8PS1-0HF unit L, N 1 5 conductors / G_NSV0_074 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 0. 7 conductors 1) X CD-L-406-EE-L 8PS1-0JF unit L4, L, L, L1, N, L5 kg /0 Siemens LV

21 Siemens AG 010 CD-L System A End flanges Overview The end flanges serve as touch protection at the end of the busbar line. They are available in two versions (end cap as mating piece for the entry feeder unit and end cap with connecting piece as mating piece for the end feeder unit). They are connected to the corresponding end of the straight element. Enclosure material End cover: Thermoplast Connecting piece (only EE-EF): Galvanized metal enclosure Selection and ordering data Unpainted end flanges (supplied from stock) Length Conductor configuration DT Type Order No. Price SET, M) m kg Rated current I n = 5 and 40 A, one-sided End flanges (coded KR, KW), can be used with entry feeder unit 0.05 conductors B CD-L-1406-EA-EF 8PS1 7-0DF unit G_NSV0_076 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 End flanges unpainted (coded KR, KW), can be used with end feeder unit 0.5 conductors B CD-L-1406-EE-EF 8PS0 5-0DF unit G_NSV0_075 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 Rated current I n = 5 and 40 A, double-sided End flanges (coded KR, KW), can be used with entry feeder unit 0.05 conductors B CD-L-406-EA-EF 8PS1 8-0JF unit G_NSV0_078 L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 End flanges unpainted (coded KR, KW), can be used with end feeder unit 0.5 conductors B CD-L-406-EE-EF 8PS0 6-0JF unit G_NSV0_077 L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 Siemens LV /1

22 CD-L System A End flanges Painted end flanges (delivery on request) Siemens AG 010 m Rated current I n = 5 and 40 A, one-sided Length Conductor configuration DT Type Order No. Price SET, M) End flanges can be used with entry feeder unit 0.05 conductors B CD-L-1406-EA-EF 8PS1 7-0DF unit G_NSV0_076 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 End flanges painted, white (RAL 9016) can be used with end feeder unit 0.5 conductors X CD-L-1406-EE-EF-L 8PS1 5-0DF unit G_NSV0_079 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 Rated current I n = 5 and 40 A, double-sided End flanges can be used with entry feeder unit 0.05 conductors B CD-L-406-EA-EF 8PS1 8-0JF unit L, N G_NSV0_ conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 End flanges painted, white (RAL 9016) can be used with end feeder unit 0.5 conductors X CD-L-406-EE-EF-L 8PS1 6-0JF unit G_NSV0_080 L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / 1 L, N 5 conductors L, L, L1, N 7 conductors L4, L, L, L1, N, L5 kg / Siemens LV

23 Siemens AG 010 CD-L System A Junction units Overview The enclosure is made of thermoplast and the connection point comprises a galvanized metal enclosure. For flexible junction units, double-sided, the two circuits are mechanically separated. Selection and ordering data Unpainted junction units (supplied from stock) Length Conductor configuration DT Type Order No. Price m kg Rated current I n = 5 A, one-sided Flexible junction units unpainted (coded KR, KW) 0.75 conductors D CD-L-154-R 8PS0 0-0CF5 1 1 unit L, N 5 conductors L, L, L1, N G_NSV0_ conductors 1) B CD-L-156-R 8PS0 0-0DF5 1 1 unit L4, L, L, L1, N, L5 Rated current I n = 5 A, double-sided Flexible junction units unpainted (coded KR, KW) 0.75 conductors B CD-L-54-R 8PS0 1-0HF5 1 1 unit L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / G_NSV0_099 1 L, N 5 conductors L, L, L1, N conductors 1) B CD-L-56-R 8PS0 1-0JF5 1 1 unit L4, L, L, L1, N, L5 Rated current I n = 40 A, one-sided Flexible junction units unpainted (coded KR, KW) 0.75 conductors D CD-L-1404-R 8PS0 0-0CF unit L, N 5 conductors L, L, L1, N G_NSV0_ conductors 1) D CD-L-1406-R 8PS0 0-0DF unit L4, L, L, L1, N, L5 Rated current I n = 40 A, double-sided Flexible junction units unpainted (coded KR, KW) 0.75 conductors D CD-L-404-R 8PS0 1-0HF unit L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / G_NSV0_099 1 L, N 5 conductors L, L, L1, N conductors 1) D CD-L-406-R 8PS0 1-0JF unit L4, L, L, L1, N, L5 1) L4/L5 circuit: max. rated current 5 A. SET, M) P. unit Siemens LV /

24 CD-L System A Junction units Painted junction units (delivery on request) Siemens AG 010 m Rated current I n = 5 A, one-sided 1) L4/L5 circuit: max. rated current 5 A. Length Conductor configuration DT Type Order No. Price SET, M) Flexible junction units painted, white (RAL 9016) 0.75 conductors X CD-L-154-R-L 8PS1 0-0CF5 1 1 unit L, N 5 conductors L, L, L1, N G_NSV0_ conductors 1) X CD-L-156-R-L 8PS1 0-0DF5 1 1 unit L4, L, L, L1, N, L5 Rated current I n = 5 A, double-sided Flexible junction units painted, white (RAL 9016) 0.75 conductors X CD-L-54-R-L 8PS1 1-0HF5 1 1 unit L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / G_NSV0_08 1 L, N 5 conductors L, L, L1, N conductors 1) X CD-L-56-R-L 8PS1 1-0JF5 1 1 unit L4, L, L, L1, N, L5 Rated current I n = 40 A, one-sided Flexible junction units painted, white (RAL 9016) 0.75 conductors X CD-L-1404-R-L 8PS1 0-0CF unit L, N 5 conductors L, L, L1, N G_NSV0_ conductors 1) X CD-L-1406-R-L 8PS1 0-0DF unit L4, L, L, L1, N, L5 Rated current I n = 40 A, double-sided Flexible junction units painted, white (RAL 9016) 0.75 conductors X CD-L-404-R-L 8PS1 1-0HF unit L, N 1 5 conductors / 1 conductors 1 L, L, L1, N / G_NSV0_08 1 L, N 5 conductors L, L, L1, N conductors 1) X CD-L-406-R-L 8PS1 1-0JF unit L4, L, L, L1, N, L5 kg /4 Siemens LV

25 Siemens AG 010 CD-L System A Tap-off plugs Selection and ordering data Uncoded tap-off plugs (supplied from stock) Color 1) Top part/ Base Outgoing cable Length Crosssection Rated DT Type Order No. Price current I n SET, M) m mm A kg Tap-off plugs with cable FROR cable according to IEC and flame-retardant according to IEC pole, phase L1, L or L, with N and ; without fuse OR/GR (N/L1) B CD-L-AO10- N/L1-1 8PS KF units G_NSV0_01655 G_NSV0_01641 G_NSV0_0164 G_NSV0_0164 OR/GN (N/L) OR/BK (N/L) OR/BN (N/L) B CD-L-AO10- N/L B CD-L-AO10- N/L B CD-L-AO10- N/L-1 5-pole, L1, L, L, N and ; without fuses OR/OR B CD-L-A5O10- N/L/L1/L- 8PS LF units PS MF units PS NF units PS0 044-QF units G_NSV0_084 G_NSV0_ pole + L4/L5, phase L1, L or L, with N and ; without fuses BK/GR (N/L1 + L4/L5) B CD-L-A5O10- N/L1/L4/L5-8PS0 044-RF units G_NSV0_01644 BK/GN (N/L + L4/L5) B CD-L-A5O10- N/L/L4/L5-8PS0 044-SF units G_NSV0_01645 BK/BK (N/L + L4/L5) B CD-L-A5O10- N/L/L4/L5-8PS0 044-TF units G_NSV0_086 L4/L5 and for 7-conductor busbar system (standard and codable tap-off points), without fuses OR/OR B CD-L-AO10- L4/L5-1 8PS UF units ) OR = orange GR = gray GN = green BK = black BN = brown Siemens LV /5

26 CD-L System A Tap-off plugs Siemens AG 010 Color 1) Top part/base Rated DT Type Order No. Price current I n SET, M) A kg Tap-off plugs with terminals L/N/ connection: max. cable diameter 14 mm, max. conductor cross-section.5 mm -pole, 16 phase can be changed to L1, L or L, G_NSV0_087 with N and ; without fuse TR/GR B CD-L-AO16-N/L-0 8PS AF units pole + L4/L5, 16 phase can be changed to L1, L or L, with N and ; without fuse TR/GR B CD-L-A5O16- N/L/L4/L5-0 8PS AF units pole, 6. phase can be changed to L1, L or L, with N and ; with micro-fuse 6. A, size 5 mm 0 mm, type gg (IEC) quick TR/GR B CD-L-AM6,-N/L-0 8PS0 04-0AF units pole, 16 phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/GR B CD-L-AM16-N/L-0 8PS0 04-0AF units pole, 6. phase can be changed to L1, L or L, with N and ; with micro-fuse 6. A, size 5 mm 0 mm, type gg (IEC) quick TR/GR D CD-L-A5M6,- N/L/L4/L5-0 8PS0 04-0AF units pole + L4/L5, 16 phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/GR D CD-L-A5M16- N/L/L4/L5-0 8PS0 04-0AF units Mobile contacts Mobile contact N 16 A, without fuse 16 BU B CD-L-AMCO16-N 8PS AA units P 16 A, without fuse 16 BK B CD-L-AMCO16-P 8PS0 08-0AA units NSV0_01657 NSV0_01646 NSV0_ ) TR = transparent GR = gray BU = blue BK = black NSV0_01648 P 10-A holder with micro-fuse A, size 5 mm 0 mm, type gg (IEC) quick BK B CD-L-AMCM6,-P 8PS0 08-0AA units P 16-A holder with cylindrical 16 fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick BK B CD-L-AMCM16-P 8PS AA units /6 Siemens LV

27 Siemens AG 010 CD-L System A Tap-off plugs Coded tap-off plugs (delivery on request) Color 1) Outgoing cable Top part/base Length Crosssection Rated DT Type Order No. Price current I n SET, M) P. unit m mm A kg Tap-off plugs with cable FROR cable according to IEC and flame-retardant according to IEC 60-1 For red coded tap-off points -pole, phase L1, L or L, with N and ; without fuse RD/GR B CD-L-AO10-8PS KF units (N/L1) N/L1-1-KR G_NSV0_01658 G_NSV0_01649 RD/GN (N/L) B CD-L-AO10- N/L-1-KR 8PS LF units G_NSV0_01650 RD/BK (N/L) B CD-L-AO10- N/L-1-KR 8PS MF units G_NSV0_01651 RD/BN (N/L) B CD-L-AO10- N/L-1-KR 8PS NF units G_NSV0_01659 For white coded tap-off points -pole, phase L1, L or L, with N and ; without fuse WH/GR (N/L1) D CD-L-AO10- N/L1-1-KW 8PS KF units G_NSV0_0165 WH/GN (N/L) D CD-L-AO10- N/L-1-KW 8PS LF units G_NSV0_0165 WH/BK (N/L) D CD-L-AO10- N/L-1-KW 8PS MF units G_NSV0_01654 WH/BN (N/L) D CD-L-AO10- N/L-1-KW 8PS NF units ) RD = red GR = gray GN = green BK = black BN = brown WH = white Siemens LV /7

28 CD-L System A Tap-off plugs Siemens AG 010 Version Color 1) 1) TR = transparent RD = red WH = white Top part/base Rated current I n DT Type Order No. Price A Tap-off plugs with terminals L/N/ connection: max. cable diameter 14 mm, max. conductor cross-section.5 mm For red coded tap-off points -pole, phase can be changed to L1, L or L, with N and ; without fuse TR/RD 16 B CD-L-AO16- N/L-KR-0 G_NSV0_090 -pole + L4/L5, phase can be changed to L1, L or L, with N and ; without fuse TR/RD 16 D CD-L-A5O16- N/L/L4/L5-KR-0 -pole, phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/RD 16 B CD-L-AM16- N/L-KR-0 -pole + L4/L5, phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/RD 16 D CD-L-A5M16- N/L/L4/L5-KR-0 For white coded tap-off points -pole, phase can be changed to L1, L or L, with N and ; without fuse TR/WH 16 D CD-L-AO16- G_NSV0_0164 N/L-KW-0 -pole + L4/L5, phase can be changed to L1, L or L, with N and ; without fuse TR/WH 16 D CD-L-A5O16- N/L/L4/L5-KW-0 -pole, phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/WH 16 B CD-L-AM16- N/L-KW-0 -pole + L4/L5, phase can be changed to L1, L or L, with N and ; with cylindrical fuse 16 A, size 8.5 mm 1.5 mm, type gg (IEC) quick TR/WH 16 D CD-L-A5M16- N/L/L4/L5-KW-0 SET, M) 8PS AF units PS AF units PS0 05-0AF units PS0 05-0AF units PS AF units PS AF units PS AF units PS AF units kg /8 Siemens LV

29 Siemens AG 010 CD-L System A Accessories Selection and ordering data Mounting NSV0_094 NSV0_09 NSV0_091 NSV0_09 Number of sides Load capacity DT Type Order No. Price kg SET, M) Standard fixing brackets For mounting trunking units and luminaires For mounting trunking units on the ceiling or floor and for suspending luminaires on the trunking unit 1 1 B CD-L-B1-G-1 8PS AA units B CD-L-B-G-1 8PS0 07-0AA units Universal suspension brackets For mounting trunking units and luminaires For suspending trunking units on the wall, on the ceiling or on the floor and for suspending luminaires on the trunking unit 1 5 B CD-L-B1-O-5 8PS0 07-0AA units B CD-L-B-O-5 8PS AA units Fixing brackets with hook For mounting trunking units and luminaires For suspension by cable or pendant or chain and for suspending the luminaires on the trunking unit 1 5 B CD-L-BH1-5 8PS AA units B CD-L-BH-5 8PS AA units Hooks, open and closed For mounting trunking units and luminaires For suspension by cable or pendant or chain in conjunction with suspension/fixing bracket Hook open 5 B CD-L-HO 8PS AA units Hook closed 5 B CD-L-HG 8PS AA units kg Siemens LV /9

30 CD-L System A Accessories Siemens AG 010 Version DT Type Order No. Price SET, M) P. unit kg Cable ducts Cable ducts Made of plastic (white), standard length m. Cable duct used for cables in auxiliary circuits. B CD-L-CC 8PS AA units G_NSV0_095 It is mounted on the trunking unit with the fixing brackets for cable ducts (two brackets every m). Fixing brackets for cable duct Fixing bracket for cable duct for mounting the cable ducts on the ceiling, on the floor or on the wall, alone or in combination with trunking units It can be mounted on the standard fixing B CD-L-BCCO 8PS AA units G_NSV0_096 brackets or universal suspension brackets. Accessories for degree of protection IP55 IP55 covers for tap-off point B CD-L-FAS 8PS AA units G_NSV0_097 /0 Siemens LV

31 Siemens AG 010 BD01 System A Introduction Overview NSV0_00041a Trunking unit Junction unit Feeder unit 4 Tap-off unit 5 6 Ancillary equipment unit Optional equipment Version Type-tested low-voltage switchgear and controlgear combination (TTA) according to IEC/EN IEC/EN Degree of protection High degree of protection IP54 with tap-off points at sides and bottom Degree of protection IP50 with tap-off points at the top Degree of protection increase to IP55 with optional equipment Components Trunking units 5-conductor system or tap-off units spaced 1 m apart 4 or 6 tap-off units spaced 0.5 m apart Lengths of m and m Junction units Flexible junction units Feeder units Universal infeed Tap-off units Up to 6 A With built-in parts or for customized device installation For, 4 or 8 modular widths (MW) With or without device installation unit Ancillary equipment units For 4 or 8 modular widths (MW) With or without device installation unit With or without socket assembly Accessories Mounting sets for degree of protection IP55 Fixing and suspending Coding sets Fire protection kit S90 Siemens LV /1