AMIK Three Phase Digital Panel Meters

Transcription

1 AMIK Three Phase Digital Panel Meters USA SICE 1936 ELIAILIT EOD MEASUE Special Features 3 Line 4 Digits ultra bright LED Display (up to 9999) On site Programmable CT/PT atios User selectable CT Secondary 1A/5A User selectable 3ph 3wire / 3ph 4wire / single phase etwork Storage of MI / MAX values Measurement & Display of PM, un hours, O hours & o. of Interrupts Limit switch with one relay UL and CSA listed Don t require PT for the voltage measurement up to 500 ACV Amik 100 is a compact multifunction instrument which measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire etwork & replaces multiple analog panel meters Electrical Parameters Sr o Parameter 3 Phase 4 Wire 3 Phase 3 Wire 1 Phase 2 Wire 1 System Volts 2 System Current 3 Frequency 4 Volts 5 Volts 6 Volts 7 Volts - 8 Volts 9 Volts 10 Current 11 Current 12 Current 13 PM 14 Max (System Voltage / System Current) 15 Min (System Voltage / System Current) 16 Hour un 17 O Hour 18 umber of auxiliary interrupt Page 1 of 6 Version o. :AMK100/2016/07/28

2 Ordering Information Product Code AMIK 100 Display Type 3 Line 1 Line (20mm display) System Type 3 Ph. (P. 3W or 4W) 1 Ph. Input Voltage / Current 100 TO 500VL-L 1/5A Power Supply 40 V 300 VAC / DC Limit switch Limit switch relay Catalog o. A100 Accessories Three-Phase Current Transformer A three-phase terminal style current transformer must be used with A M I K three phase meters. The current transformer is equipped with terminals to permit easy connection to the AMIK units. These terminals are #8-32 brass studs and come with a flatwasher, lockwasher and a regular nut (leads are not provided). Ordering Information Catalog umber Current atio 60 Hz urden 60 Hz :5 ± 3% :5 ± 2% :5 ± 1% :5 ± 1% :5 ± 1% Page 2 of 6 Version o. :AMK100/2016/07/28

3 Amik 100 Application Amik 100 measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC Voltage, AC Current, & many more. Product Features On site programmable PT/CT ratios User selectable CT Secondary 5A / 1A User selectable PT Secondary It is possible to program primary of the external potential Transformer (PT), primary of external Current Transformer (CT) on site via front panel keys by entering into Programming mode. The secondary of external Current Transformer (CT) can be programmed on site to either 5A or 1A using front panel keys. The secondary of external Potential Transformer (PT) can be programmed on site from 100VLL to 500VLL using front panel keys. Onsite selection of Auto scroll / Fixed Screen Low back depth True MS measurement EMC Compatibility The instrument has very low back depth (behind the panel) of less than 55mm (without output options). The instrument measures distorted waveform up to 15th Harmonic. Compliance to International standard IEC User selectable 3 phase 3Wire 4Wire or Single phase etwork User can program on site the network connection as either 3 Phase 3 Wire/4 Wire or single phase network using front panel keys. 3 Phase 4 wire or single phase network are available. Interference Emission Interference Immunity Electrostatic discharge IEC : 2005, Class, A IEC : 2005 IEC kV/8kV contact/air. (ESD) PM Measurement The instrument display otation per minutes for generator applications. umber of poles can be set on site depending upon application requirement. EM Field IEC V/m (80 MHz to 1 GHz) 3 V/m (1.4 Ghz to 2 GHz) -- 1 V/m (2 GHz to 2.7 GHz) Limit switch (elay) 3 line 4 digits LED display The instrument will trip the relay if the programmed parameter exceeds the programmed Trip Limits. Simultaneous display of 3 Parameters. urst Surge Conducted F IEC kv (5/50 ns, 5 khz) IEC kvll / 2 kvl. IEC V (150 khz to 80 MHZ) Enclosure Protection for dust and water Storage of parameters possible Four function keys Conforms to IP 50 (for front face) or IP 65 option (for front with seal) & IP 20 (for back) & as per IEC The instrument stores minimum and maximum values for System Voltage, System Current, un Hour, O Hour & number of Interrupts. Every 60 sec stored values are updated. Using the four function key, it is possible to go desired parameter screen instantly. ated Power Frequency magnetic Field Voltage dip Short interruptions IEC IEC % during 10/12 cycles. 70% during 25/30 cycles. IEC % during 25/30 cycles. 25 cycles for 50 Hz test. 30 cycles for 60 Hz test. A/m Page 3 of 6 Version o. :AMK100/2016/07/28

4 mm+ Amik 100 Dimension Details eference conditions for Accuracy eference temperature 23 C +/- 2 C Input waveform Sinusoidal (distortion factor 0.005) With optional Limit switch 96 mm Input frequency 50 or 60 Hz ±2% Auxiliary supply voltage ated Value ±1% Auxiliary supply frequency ated Value ±1% 96 mm Display Area Accuracy Voltage Current Frequency Input Voltage ominal input voltage (AC MS) Max continuous input voltage ominal input voltage burden System PT secondary values System PT primary values Input Current ominal input current System CT secondary values System CT primary values Max continuous input current ominal input current burden Auxiliary Supply External Aux ±1% of range ( % of ominal value) ±1% of range ( % of ominal value) 0.5% of mid frequency Phase eutral 290V L-, Line-Line 500V L-L 120% of rated value < 0.3 VA approx. per phase (For external auxiliary meter) 100VLL to 500VLL programmable on site. 100VLL to 692kVLL programmable on site. 5A AC MS 1A & 5A programmable on site From 1A up to 9999A (for 1 or 5 Amp ) 120% of rated value < 0.2 VA approx. per phase 40 V 300V AC-DC (± 5 % ) 55 mm 4 mm 42 mm 62 mm 4 mm 42 mm 92mm+0.8 Self powered ** Input voltage range from 80% to 100% of ated value. (Self powered meter is available only in 3Phase 4 Wire and Single Phase network.) Auxiliary input is derived from Phase 1 ( phase) Frequency range VA burden 45 to 65 Hz 3 VA Approx. Panel Cutout ** ot Available Page 4 of 6 Version o. :AMK100/2016/07/28

5 Amik 100 Overload Withstand Voltage Current 2 x rated value for 1 second, repeated 10 times at 10 second intervals 20x rated value for 1 second, repeated 5 times at 5 min intervals Installation Easy Clip in Installation on Panel Operating Measuring anges Voltage ange With External Aux Voltage ange With Self Power Current ange Frequency % of rated value % of rated value % of rated value Hz Easy Clip-in mounting Swivel screw Limit Switch (elay) Switching Voltage & Current for elay 0.025%/ C for Voltage 0.05%/ C for Current 240 VDC,5 A (1O+1C) Panel Thickness : 1-3 mm for self clicking, 1 6 mm for swivel screws. Enclosure Front IP 50 Front with seal (Option) IP 65 ** ack IP 20 Environmental Operating temperature Storage temperature elative humidity Warm up time Shock Vibration Safety Pollution degree Installation category High Voltage Test -20 to +70 C -30 C to +80 C 0 to 95% non condensing Minimum 3 minute 15g in 3 planes Hz, 0.15mm amplitude 2 III 3.3 kv AC, 50Hz for 1 minute between Aux. and measuring inputs Optional Limit Switch pluggable module. Applicable Standards EMC Safety IP for water & dust IEC : 2005 IEC , Permanently connected use IEC60529 ** ot Available Page 5 of 6 Version o. :AMK100/2016/07/28

6 Amik 100 Dimensions and Weight ezel size 96 mm x 96 mm DI ear Installation Connection IL1 VL1 IL1 IL2 VL2 IL2 IL3 VL3 IL Panel cut-out mm x mm. Overall depth Panel Thickness 55 mm (without output options) 62 mm (with output options). 1-3 mm for self clicking, 1 6 mm for swivel screws. IL1 VL1 IL1 IL2 VL2 IL2 IL3 VL3 IL Multifunction Meter MODEL : Amik 100 IPUT :500VL-L, 5A/1A, 45-65Hz AUX SUPPL :40V-300V AC-DC, 3VA S O : 11/02/ AUX. -. ~. ~ LIMIT SW. COM O C Weight 320 gm. Approx (with output options).. Electrical Connections Self Powered Aux External Powered Aux 3 Phase 4 Wire Unbalanced Load C L + - AUX SUPPL 3 Phase 3 Wire Unbalanced Load ot Applicable L + - AUX SUPPL Phase 2 Wire C L + - AUX SUPPL *ote: For Measurement of parameters, Voltage must be present between terminal 2 & 11 for single phase or 3 phase 4 wire network and between terminal 2 & 5 or 2 & 8 for 3 phase 3 wire network. Page 6 of 6 Version o. :AMK100/2016/07/28

7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Simpson: A100