2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch
|
|
- Roberta Foster
- 6 years ago
- Views:
Transcription
1 2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG272 DECRIPTION The DG272 is 2 Port high speed analog switch optimized for UB 2. signal switching. The DG272 switch is configured in DPDT. It handles bidirectional signal flow, achieving a 62 MHz -3 db bandwidth with 5 pf load, and a port to port Crosstalk and isolation at -49 db. Processed with high density sub micron CMO, the DG272 provide low parasitic capacitance. ignals are routed with minimized phase distortion and attain a bit to bit skew is as low as 4 p. The DG272 is designed for a wide range of operating voltages, from 2.7 V to 4.3 V that can be driven directly from one cell Li-ion battery. On-chip circuitry protects against conditions when either the D+/D- lines are shorted to the V BU at the UB port. Additionally, logic control pins ( and ) can tolerate the presence of voltages that are above the supply power rail (). The control logic threshold is guaranteed to be (V IH = 1.3 V/min). Latch up current is greater than 3 ma, as per JED78, and its ED tolerance exceeds 8 kv. Packaged in ultra small miniqfn-1 (1.4 mm x 1.8 mm x.55 mm), it is ideal for portable high speed mix signal switching application. As a committed partner to the community and the environment, manufactures this product with lead (Pb)-free device termination. The miniqfn-1 package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free -E4 suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and ML rating. As a further sign of 's commitment, the DG272 is fully RoH complaint. FEATURE Wide operation voltage range Low on-resistance, 5.7 Ω (typical at 3 V) Low capacitance, 5.6 pf (typical) 3 db high bandwidth with 5 pf load: 62 MHz (typical) Low bit to bit skew: 4 p (typical) Low power consumption Low logic threshold: V Power down protection: D+/D- pins can tolerate up to 5 V when = V Logic ( and ) above tolerance Latch-up current greater than 3 ma per JED78 8 kv ED protection (HBM) Lead (Pb)-free low profile miniqfn-1 (1.4 mm x 1.8 mm x.55 mm) Material categorization: for definitions of compliance please see APPLICATION Cellular phones Portable media players PDA Digital camera GP Notebook computer TV, monitor, and set top box FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION miniqfn-1l HD2+ HD D- 9 1 Pin 1: LONG LEAD HD1+ HD D+ Pin 1 Gx Device marking: Gx for DG272 x = Date/Lot traceability code Top View Rev. E, 15-Dec-14 1 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
2 DG272 ORDERING INFORMATION TEMP RANGE PACKAGE PART NUMBER -4 C to +85 C miniqfn-1 DG272DN-T1-E4 TRUTH TABLE (PIN 8) (PIN 1) FUNCTION D+ = HD1+ and D- = HD1-1 D+ = HD2+ and D- = HD2-1 X Disconnect PIN DECRIPTION PIN NAME HD1±, HD2±, DECRIPTION Bus witch Enable elect Input Data Port.5.4 Differential ignal (V) Time (ns) High peed ignal Quality Eye Diagram Test with = 3.3 V UMMARY OF THE UB 2. IGNAL QUALITY TET REULT Compliance Test High peed ignal Eye Test Pass EOP Width 7.95 bits Measured ignal Rate 48.9 MHz Consecutive Jitter Range ps to 68.2 ps, RM Jitter 26.8 ps Paired JK Jitter Range ps to 51.4 ps, RM Jitter 25.3 ps Paired KJ Jitter Range ps to 58.5 ps, RM Jitter 26.8 ps ABOLUTE MAXIMUM RATING (T A = 25 C, unless otherwise noted) PARAMETER LIMIT UNIT -.3 to +5 Reference to,,, HD1±, HD2± a -.3 to ( +.3) Current (Any Terminal except,,, HD1±, HD2±) 3 Continuous Current (,,, HD1±, HD2±) ± 25 ma Peak Current (Pulsed at 1 ms, 1 % duty cycle) ± 5 torage Temperature (D uffix) -65 to +15 C Power Dissipation (Packages) b miniqfn-1 c 28 mw ED (Human Body Model) I/O to 8 kv Latch-up (Current Injection) 35 ma Notes a. ignals on,,, HD1±, HD2± exceeding will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.6 mw/ C above 7 C Rev. E, 15-Dec-14 2 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT V
3 DG272 PECIFICATION = 3 V PARAMETER YMBOL TET CONDITION OTHERWIE UNLE PECIFIED TEMP. a LIMIT -4 to +85 C UNIT MIN. b TYP. c MAX. b Analog witch Analog ignal Range d V ANALOG R D(on) Full - V On-Resistance R D(on) = 3 V, I = 8 ma, V HD1/2± =.4 V Room Full On-Resistance Match d ΔR ON = 3 V, I = 8 ma, V HD1/2± =.4 V Room On-Resistance Resistance Flatness d R ON Flatness = 3 V, I = 8 ma, V HD1/2± = V, 1 V Room witch Off Leakage Current I (off) = 4.3 V, V HD1/2± =.3 V, 3 V, V = 3 V,.3 V Full -1-1 Channel On Leakage Current I (on) = 4.3 V, V HD1/2± =.3 V, 4 V, V = 4 V,.3 V Full -2-2 Digital Control = 3 V to 3.6 V Full Input Voltage High V INH = 4.3 V Full V Input Voltage Low V INL = 3 V to 4.3 V Full Input Capacitance C IN Full pf Input Current I INL or I INH V IN = or Full -1-1 μa Dynamic Characteristics Break-Before-Make Time e, d t BBM Room Full Enable Turn-On Time e, d t ON(EN) = 3 V, V D1/2 ± = 1.5 V, R L = 5 Ω, Room C L = 35 pf Full ns Enable Turn-Off Time e, d Room t OFF(EN) Full Charge Injection d Q INJ C L = 1 nf, R GEN = Ω, V GEN = V pc Off-Isolation d OIRR = 3 V to 3.6 V, R L = 5 Ω, C L = 5 pf, Crosstalk d X TALK f = 24 MHz db Bandwidth d BW = 3 V to 3.6 V, R L = 5 Ω, C L = 5 pf, -3 db MHz Channel-Off Capacitance d C D1± (off) C D2± (off) Room = 3.3 V, f = 1 MHz Channel-On Capacitance d C (off) C (on) pf Channel-to-Channel kew d t K(O) kew Off Opposite Transitions of the ame Output d t K(p) = 3 V to 3.6 V, R L = 5 Ω, C L = 5 pf ps Total Jitter d t J Power upply Power upply Range V Power upply Current I+ V IN = V, or Full μa Notes a. Room = 25 C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. V IN = input voltage to perform proper function. f. Crosstalk measured between channels Ω na tresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability Rev. E, 15-Dec-14 3 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
4 DG272 TYPICAL CHARACTERITIC (T A = 25 C, unless otherwise noted) R ON - On-Resistance ( ) = 2.6 V = 3. V = 3.6 V T = 25 C I ON = 8 ma D1± = 4.3 V V D - Analog Voltage (V) R ON - On-Resistance ( ) = 2.6 V, I ON = 8 ma + 85 C + 25 C - 4 C V D - Analog Voltage (V) On-Resistance vs. V D and ingle upply Voltage On-Resistance vs. Analog Voltage and Temperature 25 = 3.6 V, I ON = 8 ma 25 = 3. V, I ON = 8 ma R ON - On-Resistance ( ) C + 25 C - 4 C R ON - On-Resistance ( ) C + 25 C - 4 C V D - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature V D - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature 1 ma 1 ma 1 = 4.3 V I+ - upply Current (A) 1 µa 1 µa 1 µa 1 na 1 na = 4.3 V = 3.6 V = 3. V = 2.6 V Leakage Current (pa) I (on) I Dx±(off) I (off) 1 na 1 pa 1 1 1K 1K 1K 1M 1M Input witching Frequency (Hz) upply Current vs. Input witching Frequency Temperature ( C) Leakage Current vs. Temperature Rev. E, 15-Dec-14 4 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
5 DG272 TYPICAL CHARACTERITIC (T A = 25 C, unless otherwise noted) Gain (db) Frequency (MHz) Gain vs. Frequency, C L = 5 pf, = 3.3 V Off Isolation (db) Frequency (MHz) OFF Isolation, = 3.3 V Crosstalk (db) Frequency (MHz) Crosstalk, = 3.3 V TET CIRCUIT witch Input Logic Input HD1± or HD2± witch Output R L 5 Ω V OUT C L 35 pf Logic Input witch Output V INH V INL V 5 % t r t f < 5 ns < 5 ns.9 x V OUT V t ON t OFF C L (includes fixture and stray capacitance) V OUT = ( ) R L R + L R ON Logic "1" = witch On Logic input waveforms inverted for switches that have the opposite logic sense. Fig. 1 - witching Time Rev. E, 15-Dec-14 5 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
6 DG272 TET CIRCUIT Logic Input V INH t r < 5 ns t f < 5 ns V HD1± HD1± V O V INL V HD2± HD2± R L 5 Ω C L 35 pf V NC = V NO V O 9 % witch Output V t D t D C L (includes fixture and stray capacitance) Fig. 2 - Break-Before-Make Interval V gen + R gen V IN = - HD1± or HD2± V OUT C L = 1 nf V OUT IN On V OUT Off On Q = OUT x C L IN depends on switch configuration: input polarity determined by sense of switch. Fig. 3 - Charge Injection 1 nf 1 nf HD1± or HD2± V, 2.4 V R L V, 2.4 V HD1± or HD2± Meter HP4192A Impedance Analyzer or Equivalent Analyzer f = 1 MHz Off Isolation = 2 log V V HD2± or HD1± Fig. 4 - Off-Isolation Fig. 5 - Channel Off/On Capacitance maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for ilicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see Rev. E, 15-Dec-14 6 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
7 Package Information MINI QFN-1L CAE OUTLINE DIM MILLIMETER INCHE MIN. NAM. MAX. MIN. NAM. MAX. A A b c.15 or.127 REF (1).6 or.5 REF (1) D E e.4 BC.16 BC L L Note (1) The dimension depends on the leadframe that assembly house used. ECN T Rev. B, 16-May-16 DWG: 5957 Revision: 16-May-16 1 Document Number: ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT
8 PAD Pattern RECOMMENDED MINIMUM PAD FOR MINI QFN 1L 1.7 (.669) 9 x.563 (.221).663 (.261).2 (.79) (.827).4 (.157) Pitch 1 x.225 (.89) Mounting Footprint Dimensions in mm (inch) Document Number: Revision: 5-Mar-1 1
9 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT PECIFICATION AND DATA ARE UBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DEIGN OR OTHERWIE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. tatements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. uch statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 217 VIHAY INTERTECHNOLOGY, INC. ALL RIGHT REERVED Revision: 8-Feb-17 1 Document Number: 91
2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch
2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG273 DECRIPTION The DG273 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG273 switch is configured in DPDT. It
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationDual SPDT Analog Switch
Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V
More information700 MHz, -3 db Bandwidth; Single SPDT Analog Switch
7 MHz, -3 db Bandwidth; Single SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in single SPDT. It achieves 5 switch on resistance, greater than 7 MHz -3 db bandwidth
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More informationPower-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationPower-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Protection,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationDG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More information3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers
DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More informationPrecision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
More informationAutomotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth
Automotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationFEATURES APPLICATIONS
.7, Low On Resistance, + V, +5 V, +3 V, ± 5 V, SPST Switches DESCRIPTION The DG9E and DG9E are monolithic single-pole-single-throw (SPST) analog switches. The DG9E has a normally closed function. The DG9E
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage
More informationDG2307. High-Speed, Low r ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer) RoHS COMPLIANT DESCRIPTION FEATURES APPLICATIONS
High-Speed, Low r ON, SPDT Analog Switch (2:1 Multiplexer) DG2307 DESCRIPTION The DG2307 is a single-pole-double-throw switch/2:1 mux designed for 2 to 5.5 V applications. Using proprietary sub-micro CMOS
More informationFEATURES APPLICATIONS. Switches are shown for a Logic 0 Input
2, Low Leakage, Low Parasitic and Low Charge Injection, Quad SPST Analog Switches ESCRIPTION The G251, G252, and G253 are monolithic quad single-pole single-throw (SPST) analog switches that operate from
More informationFEATURES DG721, TDFN-8 COM 2 7 IN 1 NO 1 1 NO 2. Top View. Device Marking for MSOP-8: 721
.8 V to. V, Dual SPST Switches DG, DG, DG DESCRIPTION The DG, DG and DG are precision dual SPST switches designed to operate from single.8 V to. V power supply with low power dissipation. The DG, DG and
More information0.5 pc Charge Injection, 100 pa Leakage, Dual SPDT Analog Switch
0.5 pc Charge Injection, pa Leakage, Dual SPDT Analog Switch DESCRIPTION The is an analog CMOS, dual SPDT switch, designed to operate from a +2.7 V to +12 V single supply or from ± 2.7 V to ± 5 V, dual
More information0.3 pc Charge Injection, 100 pa Leakage CMOS ± 5 V / 5 V / 3 V Dual SPDT Analog Switch
0.3 pc Charge Injection, pa Leakage CMOS ± 5 / 5 / 3 Dual SPDT Analog Switch DESCRIPTION The is a dual SPDT CMOS, analog switch, designed to operate from a +3 to +16 single supply, or from ± 3 to ± 8,
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The DG4 series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. Combining
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,
More informationDG3157. High-Speed, Low r ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPDT Analog Switch (2:1 Multiplexer/Demultiplexer Bus Switch) DG3157 DESCRIPTION The DG3157 is a high-speed single-pole double-throw, low power, TTL-Compatible bus switch. Using sub-micro
More informationAutomotive N-Channel 200 V (D-S) 175 C MOSFET
Automotive N-Channel V (D-) 75 C MOFET 6.5 mm PowerPAK O-8L ingle 5.3 mm D 4 G 3 FEATURE TrenchFET power MOFET AEC-Q qualified % R g and UI tested Material categorization: for definitions of compliance
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG9E High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG9E is monolithic CMOS dual single-pole / double-throw (SPDT) analog switches. It is specifically designed for low-voltage,
More informationAutomotive P-Channel 40 V (D-S) 175 C MOSFET
Automotive P-Channel 4 V (D-) 75 C MOFET QJ45EP 6.5 mm PowerPAK O-8L ingle 5.3 mm D 4 G 3 2 FEATURE TrenchFET power MOFET AEC-Q qualified % R g and UI tested Material categorization: for definitions of
More informationLow Power, High Voltage SPST Analog Switches
Low Power, High Voltage SPST Analog Switches DG67, DG68 DESCRIPTION The DG67 and DG68 are dual supply single-pole/singlethrow (SPST) switches. On resistance is max. and flatness is 2 max. over the specified
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog FEATURES BENEFITS APPLICATIONS Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 3 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing
More informationMonolithic Dual SPST CMOS Analog Switch
Monolithic Dual SPST CMOS Analog Switch DG00B DESCRIPTION The DG00B is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally
More informationN-Channel 12 V (D-S) MOSFET
N-Channel 2 V (D-S) MOSFET SiUD42ED.4 mm PowerPAK 86 Single D 3 FEATURES TrenchFET power MOSFET Ultra small.8 mm x.6 mm outline Ultra thin.4 mm max. height Typical ESD protection 5 V (HBM).8 mm Top View.6mm
More informationP-Channel 12-V (D-S) MOSFET
i445y P-Channel -V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A).85 at V G = - 4.5 V - 4 -.5 at V G = -.5 V - 3.3 at V G = -.8 V - FEATURE Halogen-free According to IEC 649-- efinition TrenchFET Power
More informationAutomotive N-Channel 150 V (D-S) 175 C MOSFET
Automotive N-Channel 5 V (-) 75 C MOFET Q48EY FEATURE 8 7 6 O-8 ingle 5 TrenchFET power MOFET AEC-Q qualified % R g and UI tested Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationP-Channel 30 V (D-S) MOSFET
P-Channel 3 V (-) MOFET ian 3.3 mm Top View PROUCT UMMARY PowerPAK 22-8 ingle 8 3.3 mm 4 G Bottom View V (V) -3 R (on) max. () at V G = V.49 R (on) max. () at V G = 4.5 V.82 Q g typ. (nc) 27 I (A) 6 a,
More informationAutomotive P-Channel 30 V (D-S) 175 C MOSFET
Automotive P-Channel 3 V (-) 75 C MOFET Q4435EY PROUCT UMMARY V (V) - 3 R (on) ( ) at V G = - V.8 R (on) ( ) at V G = - 4.5 V.3 I (A) - 5 Configuration ingle FEATURE Halogen-free According to IEC 6249-2-2
More informationFEATURES. Parameter Symbol 10 s Steady State Unit Drain-Source Voltage V DS 30 V Gate-Source Voltage V GS ± 25
N-Channel Reduced Q g, Fast witching MOFET i48by PROUCT UMMARY V (V) R (on) (Ω) I (A).8 at V G = V 9 3.3 at V G = 4. V 7 FEATURE Halogen-free According to IEC 649-- Available TrenchFET Power MOFET High-Efficient
More informationP-Channel 30-V (D-S) MOSFET
i85y Vishay iliconix P-Channel 3-V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A). at V G = - V -.5-3. at V G = -.5 V - 9. FEATURE Halogen-free According to IEC 69-- efinition TrenchFET Power MOFETs %
More informationAutomotive P-Channel 30 V (D-S) 175 C MOSFET
Automotive P-Channel 3 V (-) 75 C MOFET PROUCT UMMARY V (V) - 3 R (on) () at V G = - V.3 R (on) () at V G = - 4.5 V.52 I (A) -.8 Configuration ingle FEATURE TrenchFET Power MOFET % R g and UI Tested AEC-Q
More informationP-Channel 40-V (D-S) MOSFET
i44by P-Channel 4-V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A) Q g (Typ.).4 at V G = - V -. - 4 4. at V G = - 4. V - 8.7 FEATURE Halogen-free According to IEC 649-- efinition TrenchFET Power MOFET
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (D-S) MOSFET SUD5N3-12P-GE3 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a.12 at V GS = 1 V 16.8 3.175 at V GS = 4.5 V 13.9 FEATURES TrenchFET power MOSFET 1 % R g and UIS tested Material
More informationN-Channel 60 V (D-S) MOSFET
N-Channel 60 V (D-S) MOSFET N700K Marking code: 7K D 3 SOT-3 (TO-36) G Top View PRODUCT SUMMARY V DS (V) 60 R DS(on) max. ( ) at V GS = 0 V Q g typ. (nc) 0.4 I D (ma) 300 Configuration Single S FEATURES
More informationP-Channel 30-V (D-S) MOSFET
P-Channel 3-V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A) a Q g (Typ.) - 3.65 at V G = - V - 35 nc 8 7 6 PowerPAK O-8 5 6.5 mm 5.5 mm Bottom View 3 G 4 Ordering Information: i7447ap-t-e3 (Lead (Pb)-free)
More informationAutomotive N-Channel 30 V (D-S) 175 C MOSFET
Automotive N-Channel 3 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 3 R DS(on) () at V GS = V.4 R DS(on) () at V GS = 4.5 V.3 I D (A) 8 Configuration Single D 3 SOT-3 (TO-36) G Top View S G D S N-Channel
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 6 V (D-S) 75 C MOSFET SQ36ES PRODUCT SUMMARY V DS (V) -6 R DS(on) () at V GS = - V.77 R DS(on) () at V GS = -4.5 V.46 I D (A) -.8 Configuration Single D 3 SOT-3 (TO-36) G Top View
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7222 is designed for the switching of high-speed
More informationCMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.)
DGA_MIL/A_MIL/A_MIL/A_MIL CMOS Analog Switches (Obsolete for non-hermetic. Use DGB Series as pin-for-pin replacements.) -V Input Range Fast Switching t ON : ns Low r DS(on) : Single Supply Operation CMOS
More informationDual N-Channel 30 V (D-S) MOSFET
Dual N-Channel 3 V (D-S) MOSFET SiA98EDJ PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) Q g (TYP.) 3 2.5 mm Top View.5 at V GS = 2.5 V 4.5 a 3. nc.58 at V GS = 4.5 V 4.5 a.77 at V GS =.8 V 4.5 a PowerPAK
More informationN-Channel 12 V (D-S) and P-Channel 20 V (D-S) MOSFET
N-Channel V (D-S) and P-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) MAX. I D (A) Q g (TYP.) N-Channel P-Channel -.33 at V GS =.5 V.5 a. nc.8 at V GS =.5 V.5 a. at V GS =.8 V.5 a.5 at V
More informationAutomotive Dual P-Channel 30 V (D-S) 175 C MOSFET
Automotive Dual P-Channel 3 V (D-S) 75 C MOSFET D 6 Marking Code: 9B TSOP-6 Dual D S 5 G Top View S 3 G FEATURES TrenchFET power MOSFET AEC-Q qualified % R g and UIS tested Material categorization: for
More informationP-Channel 30 V (D-S) MOSFET
Si369DS P-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) - 3.9 at V GS = - V - 7.6.34 at V GS = - 6 V - 7.4 at V GS = - 4.5 V - 6.5 G TO-36 (SOT-3) 3 D.4 nc FEATURES
More informationN-Channel 20 V (D-S) MOSFET
Si3DDS N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) Max. I D (A) Q g (Typ.).57 at V GS =.5 V.9 3.5.75 at V GS =.5 V.6 FEATURES Halogen-free According to IEC 69-- Definition TrenchFET
More information16-Ch/Dual 8-Ch High-Performance CMOS Analog Multiplexers
DG46, DG47 6-Ch/Dual 8-Ch High-Performance CMOS Analog Multiplexers DESCRIPTION The DG46 is a 6 channel single-ended analog multiplexer designed to connect one of sixteen inputs to a common output as determined
More informationLoad Switch with Level-Shift
Load Switch with Level-Shift Si8DDL Marking Code: VD SOT-33 SC-7 ( leads) S 2 ON/OFF R, C Top View PRODUCT SUMMARY V DS (V) 2 R DS(on) ( ) at V IN =. V.2 R DS(on) ( ) at V IN = 2. V.3 R DS(on) ( ) at V
More informationP-Channel 8 V (D-S) MOSFET
Si9DS P-Channel 8 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 8. at V GS = - 4.5 V - 6 e.6 at V GS = -.5 V - 6 e.48 at V GS = -.8 V - 5.9.68 at V GS = -.5 V - 5.
More informationP-Channel 20 V (D-S) MOSFET
Si33CDS P-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) -.39 at V GS = -4.5 V -6 e.5 at V GS = -.5 V -5.8.63 at V GS = -.8 V -5. TO-36 (SOT-3) 9 nc FEATURES TrenchFET
More informationP-Channel 20 V (D-S) MOSFET
P-Channel 2 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) - 2.32 at V GS = - 4.5 V - 5.9.4 at V GS = - 2.5 V - 5.2.675 at V GS = -.8 V - 4.3 G TO-236 (SOT-23) 3.8 nc FEATURES
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 60 V (D-S) 75 C MOSFET SQ309ES PRODUCT SUMMARY V DS (V) - 60 R DS(on) ( ) at V GS = - 0 V 0.335 R DS(on) ( ) at V GS = - 4.5 V 0.500 I D (A) -.7 Configuration Single FEATURES Halogen-free
More informationP-Channel 12 V (D-S) MOSFET
Si333DDS P-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.).8 at V GS = - 4.5 V - 6 e.3 at V GS = - 3.7 V - 6 e -.4 at V GS = -.5 V - 6 e 9 nc.63 at V GS =
More informationAutomotive P-Channel 30 V (D-S) 175 C MOSFET
Automotive P-Channel 3 V (-) 75 C MOFET Q443EY PROUCT UMMARY V (V) - 3 R (on) () at V G = - V.3 R (on) () at V G = - 4.5 V.5 I (A) -.8 Configuration ingle FEATURE TrenchFET Power MOFET % R g and UI Tested
More informationAutomotive N-Channel 300 V (D-S) 175 C MOSFET
Automotive N-Channel 300 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) 300 R DS(on) (Ω) at V GS = V 0.330 I D (A) Configuration Single TO-252 D FEATURES TrenchFET power MOSFET Package with low thermal
More informationAutomotive N-Channel 80 V (D-S) 175 C MOSFET
Automotive N-Channel 8 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 8 R DS(on) () at V GS = V.3 I D (A) 5 Configuration Single Package PowerPAK 8 x 8L PowerPAK 8 x 8L Single FEATURES TrenchFET power MOSFET
More informationAutomotive P-Channel 80 V (D-S) 175 C MOSFET
Automotive P-Channel 8 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) - 8 R DS(on) () at V GS = - 1 V.25 R DS(on) () at V GS = - 4.5 V.31 I D (A) - 5 Configuration Single FEATURES TrenchFET Power MOSFET
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 60 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) -60 R DS(on) () at V GS = - V 0.0250 R DS(on) () at V GS = -4.5 V 0.0350 I D (A) -36 Configuration Single Package PowerPAK SO-8L FEATURES
More informationN-Channel 100-V (D-S) 175 C MOSFET
N-Channel -V (D-S) 75 C MOSFET SUD4N-25 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = V 4.28 at V GS = 4.5 V 38 FEATURES TrenchFET Power MOSFET 75 C Maximum Junction Temperature % R g Tested
More informationDual N-Channel 60 V (D-S) MOSFET
Dual N-Channel 60 V (D-S) MOSFET Si96DL PRODUCT SUMMARY V DS (V) R DS(on) (Ω) MAX. I D (A) Q g (nc) TYP. 60.4 at V GS = 0 V 0.37 3 at V GS = 4.5 V 0.5 D 6 SOT-363 SC-70 Dual (6 leads) S 4 G 5 0.47 FEATURES
More informationN-Channel 40 V (D-S) MOSFET
N-Channel 4 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) 4.5 at V GS = V 4.3.54 at V GS = 4.5 V 4..7 at V GS =.5 V 3.6 G S TO-36 (SOT-3) 3 D 3.8 nc FEATURES TrenchFET
More informationN-Channel 100 V (D-S) MOSFET
N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) d Q g (TYP.).4 at V GS = V 2.46 at V GS = 7.5 V 2 TO-263 Top View S D G Ordering Information: -GE3 (Lead (Pb)-free and halogen-free)
More informationN-Channel 30-V (D-S) MOSFET
Si36BDS N-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.).7 at V GS = V. 3 3..65 at V GS =.5 V 3.5 FEATURES Halogen-free Option Available TrenchFET Power MOSFET % R g
More informationN-Channel 100 V (D-S) MOSFET
Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested
More informationN-Channel 100 V (D-S) MOSFET
N-Channel V (D-S) MOSFET SUDN-5L-GE PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ). at V GS = V.5.7.5 at V GS = 4.5 V FEATURES TrenchFET Power MOSFETs Material categorization: For definitions
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel 0-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 0.039 at V GS = - 4.5 V - 4.7-0 0.05 at V GS = -.5 V - 4. 0.068 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to
More informationP-Channel 30-V (D-S) MOSFET
i4483ey P-Channel 30-V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A) 0.0085 at V G = - 0 V - 4-30 0.04 at V G = - 4.5 V - FEATURE Halogen-free According to IEC 649-- Available TrenchFET Power MOFET E
More informationDual N-Channel 30 V (D-S) MOSFETs
Dual N-Channel 3 V (D-S) MOSFETs PRODUCT SUMMARY Channel- 3 Channel-2 3 V DS (V) R DS(on) ( ) (Max.) I D (A) Q g (Typ.).2 at V GS = V 6 a 6.8 nc.5 at V GS =.5 V 6 a.37 at V GS = V 28 a 32 nc.5 at V GS
More informationP-Channel 30-V (D-S), MOSFET
SUD5P3- P-Channel 3-V (D-S), MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A) a. at V GS = - V - 5-3.8 at V GS = -.5 V - 2 FEATURES TrenchFET Power MOSFETs RoHS COMPLIANT S TO-252 G Drain Connected to
More informationAutomotive N-Channel 100 V (D-S) 175 C MOSFET
Automotive N-Channel V (D-S) 75 C MOSFET SQM76EL PRODUCT SUMMARY V DS (V) R DS(on) () at V GS = V.59 R DS(on) () at V GS = 4.5 V.8 I D (A) 75 Configuration Single Package TO-263 D TO-263 FEATURES TrenchFET
More informationAdaptive Power MOSFET Driver 1
End of Life. Last Available Purchase Date is 3-Dec-204 Si990 Adaptive Power MOSFET Driver FEATURES dv/dt and di/dt Control Undervoltage Protection Short-Circuit Protection t rr Shoot-Through Current Limiting
More informationDual P-Channel 30-V (D-S) MOSFET
Dual P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = - V - 7. - 3.4 at V GS = - 4.5 V - 5.5 FEATURES Halogen-free According to IEC 6249-2-2 Definition TrenchFET Power
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 60 V (D-S) 75 C MOSFET SQ3427AEEV PRODUCT SUMMARY V DS (V) -60 R DS(on) () at V GS = -0 V 0.095 R DS(on) () at V GS = -4.5 V 0.35 I D (A) -5.3 Configuration Single Package TSOP-6 D
More informationAutomotive N-Channel 40 V (D-S) 175 C MOSFET
Automotive N-Channel 40 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) 40 R DS(on) () at V GS = 10 V 0.0063 R DS(on) () at V GS = 4.5 V 0.0075 I D (A) 58 Configuration Single PowerPAK SO-8L Single D FEATURES
More informationDual P-Channel 12-V (D-S) MOSFET
Dual P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.) -. at V GS = -.5 V -.5 a.5 nc. at V GS = -.5 V -.5 a. at V GS = -.8 V - 3.5 PowerPAK SC-7- Dual FEATURES Halogen-free
More informationDual N-Channel 30-V (D-S) MOSFET
Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).3 at V GS = V 5.9.53 at V GS = 4.5 V 4.9 FEATURES Halogen-free According to IEC 49-- Definition TrenchFET Power MOSFET Compliant
More informationAutomotive P-Channel 40 V (D-S) 175 C MOSFET
Automotive P-Channel 4 V (D-S) 175 C MOSFET SQD5P4-9L PRODUCT SUMMARY V DS (V) - 4 R DS(on) ( ) at V GS = - 1 V.94 R DS(on) ( ) at V GS = - 4.5 V.19 I D (A) - 5 Configuration TO-252 Single S FEATURES Halogen-free
More informationAutomotive N-Channel 100 V (D-S) 175 C MOSFET
Automotive N-Channel 0 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 0 R DS(on) ( ) at V GS = V 0.038 R DS(on) ( ) at V GS = 4.5 V 0.050 I D (A) 23 Configuration Single Package PowerPAK SO-8L PowerPAK SO-8L
More informationN-Channel 60-V (D-S) MOSFET
Si8DS N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = V.. at V GS = 4.5 V.7 FEATURES Halogen-free According to IEC 4-- Available TrenchFET Power MOSFET % R g Tested TO-
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 6 V (D-S) 75 C MOSFET SQM2P6-7L PRODUCT SUMMARY V DS (V) - 6 R DS(on) () at V GS = - V.67 R DS(on) () at V GS = - 4.5 V.88 I D (A) - 2 Configuration TO-263 Single S FEATURES TrenchFET
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 6 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) -6 R DS(on) (Ω) at V GS = - V.93 R DS(on) (Ω) at V GS = -4.5 V.33 I D (A) - Configuration Single TO-22AB FEATURES TrenchFET power MOSFET
More informationLoad Switch with Level-Shift
Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes
More informationAutomotive N-Channel 100 V (D-S) 175 C MOSFET
Automotive N-Channel V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) at V GS = V.38 I D (A) 2 Configuration TO-263 Single D FEATURES TrenchFET Power MOSFET Package with Low Thermal Resistance
More informationN- and P-Channel 2.5-V (G-S) MOSFET
N- and P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) (A) N-Channel. at = 4.5 V ± 4.5.4 at =.5 V ± 3.9 P-Channel -.5 at = - 4.5 V ± 3.5.85 at = -.5 V ±.7 FEATURES Halogen-free Option Available
More informationN-Channel 20 V (D-S) MOSFET
Si3CDS N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ.).57 at V GS =.5 V.9 3.5.75 at V GS =.5 V.6 FEATURES TrenchFET Power MOSFET Material categorization: For definitions
More information