AC3200 INTELLIGENT BROADBAND AMPLIFIER

Size: px
Start display at page:

Download "AC3200 INTELLIGENT BROADBAND AMPLIFIER"

Transcription

1 Kari Mäki (7) AC3200 INTELLIGENT BROADBAND AMPLIFIER AC3200 is the latest leading-edge addition to AC family with extended frequency and gain ranges and integrated electrical controls in both up- and downstream. It provides two active outputs with individual signal controls. AC3200 has automatic alignment routines, which take care of optimized SNR performance of both signal directions. ALSC circuits are built-in and they can activated easily by adding the transponder unit. Both signal paths are equipped with a universal plug option. These slots are protected against service interruptions with automatic Non-Stop function. Upstream signal path has many benefits compared to average products on the market. There is an extremely high gain with output and mid-stage gain controls. Signal level or unwanted disturbances like CPD or ingress can be monitored even in the cases when return channel is switched off. The local USB interface enables local control through PDA or laptop. Remote control is possible via either CATVisor or HMS compatible transponder. Features 1 GHz bandwidth Remote power supply with PFC 2 active outputs Intelligent continuous adjustments with huge gain control range Local control with PC or PDA through USB connection Possible to order customized pre-settings GaAs FET amplifier technology Excellent ESD and surge protection With AC6991/AC6980 transponder plug-in: CATVisor / HMS (AC6991) or DOCSIS (AC6980) remote connection ALSC with fully user programmable pilots Downstream spectrum analyser Upstream signal quality monitoring with automatic ingress control True plug-and-play with single pushbutton alignment Return path pilot generator (AC6991)

2 Kari Mäki (7) Technical specifications Parameter Specification Note Downstream signal path (values with diplex filters) Frequency range 47 / 54 / 70 / 85 / / 1006 MHz Return loss 20 1) Gain 2 x Input gain control ) Mid-stage gain control ) Input equaliser slope ) Mid-stage slope ) Nominal slope 8 5) Flatness ±0.4 6) Group delay 2 ns 7) Test point -20 8) Transponder connection -19 9) Input by-pass attenuation -3 Noise figure ) U max(112 QAM channels) uv 11) CTB 41 channels µv 12) CSO 41 channels µv 12) XMOD 41 channels µv 12) CTB 110 / 77 channels 71.0 / 79.0 c 13) CSO 110 / 77 channels 73.0 / 79.0 c 13) XMOD 110 / 77 channels 66.0 / 70.0 c 13) Upstream signal path (values with diplex filters) Frequency range / 42 / 50 / 65 / 85MHz Return loss 18 14) Maximum gain 2 x 30 Ingress switching 0 / - 6 / < -50 Output gain control 0-20 Mid-stage gain control 0-10 Output equaliser slope ) Flatness ± ) Measurement isolation > 35 Transponder connection ) Noise figure ) Output level, DIN 45004B µv 18) CINR > 57 c 19) General Power consumption (65 / 230 V AC) 32.0 / 34.5 W 22) Supply voltage Vac, ± Vdc / Vac Maximum current feed through 8.0 A / port 23) Hum modulation 70 23) Resistance for remote current 25 mω / port Input / Output connectors PG11 (several adaptors available) Test point connectors F- female Local service port connector USB mini-b Dimensions 245 x 255 x 100 mm h x w x d Weight 3.0 kg Operating temperature C Class of enclosure IP67 24) EMC compatibility EN (IEC ) Safety EN ESD 4 kv 25) Surge 6 kv 26)

3 Kari Mäki (7) Notes 1) The limiting curve is defined at 40 MHz -1.5 / octave. 2) Step size is 1. 3) Step size is 0.2. This interstage control is used in ALSC operation. It typically works up to - 15, but range between has no guaranteed performance. 4) Between /1006 MHz. Step size is 1. Pivot frequency can be selected electrically. 5) Between /1006 MHz. Pivot frequency can be selected electrically. 6) Typical value. The guaranteed value is ± Flatness is defined with diplex filters. All other used plug modules are 0 pads. Spec is valid 2 MHz after the starting frequency of the selected diplex filter. 7) Typical value for 4.43 MHz band. Measured at channel S2. 8) Output TP has a tolerance of ± 0.75 between MHz and ± 1.0 between MHz. It is defined with 0 plug as OUTPUT MODULE 1. Input TP is transformer type with ±1.5 tolerance. 9) Level difference between transponder connection and output 1. Tolerance ± ) Typical value at 862 MHz with the maximum gain. The guaranteed worst case value is 1.0 worse. 11) Typical value according to IEC Channels have 10 cable equivalent slope between MHz and signal level has been defined at 1002 MHz. BER measurement has been done on the worst channel between MHz. 12) EN Amplifier output was 8 cable equivalent sloped. All results are typical values in room temperature. XMOD is measured at the lowest channel. The highest recommended output level for the amplifier is uv with 42 channels CTB level -2.0 CSO level NF Mid-Stage Attenuation The picture is showing how the NF and distortion performances are changing if mid-stage gain control is used. Defined with the 8 sloped output and CENELEC loading. Performance is defined at the worst frequency. 13) Measured with 77 and 110 NTSC channels. Amplifier output was 12 linearly sloped and the used levels were at 55 / 550 / 750 / 862 MHz 35.0 / 42.5 / 45.5 / 47.0 mv. All results are typical values in room temperature.. XMOD is measured at MHz. The highest recommended output level for the amplifier is 51 mv with 110 channels and 53 mv with 77 channels. 14) Valid over the band 7 65 MHz. 15) Between 5 65 / 85 MHz. Step size is 1. Pivot frequency is 65 or 85 MHz, which can be selected electrically. 16) Typical value. The worst case value is ± 0.6. Flatness is defined with 65 MHz diplex filters. 17) This is the level difference between return path input and transponder transmit pin when return path is set to full 30 gain. This value increases linearly to -17 when return path gain decreases to 20, after that it stays at -17. The accuracy is ± 1.

4 Kari Mäki (7) 18) Typical value with full gain, which can be used in network design. 19) CINR Input Level (uv / Hz) Measurement is done at 49 MHz with full band noise loading between 5 65 MHz. The left side curve is valid with maximum gain and the right side curve is tested with -10 inter-stage attenuation. 20) AC voltage is measured using sliding average. The accuracy specification applies only to constant waveform. 21) Internal temperature is typically ºC higher than ambient temperature, depending on installation and ventilation. 22) Without transponder. Transponder increases total power dissipation with 2 W. 23) At any frequency from 10 to 862 MHz when the remote current is less than 8 A. 12 A is the maximum current, which can be locally injected into all ports together (simultaneously). 24) The housing is tested to be class of IP67. However, in standard delivery conditions the lowest side wall is equipped with a ventilation hole of 1 mm. Then the practical enclosure class is IP54. 25) EN , contact discharge to enclosure and RF-ports. 26) EN , 1.2 / 50 µs pulse to RF-ports. Compatibility All accessories that will be used together with this product, should use the newest generation available. By using only up-to-date accessories a proper operation can be ensured.

5 Kari Mäki (7) Monitoring functions Status LED for alarm indication Return path ingress switch on/ attenuated / off control 65 VAC voltage measurement with alarms Local +12 V and +24 V voltage measurements with alarms Internal temperature measurement with alarms Full electrical control of all forward and return path alignments Easy and fast intelligent control mode, and full-featured manual control mode Indication of universal plugs presence Electrical control of return path plug usage Electrical control of forward path frequency range Return path automatic alignment Uptime, total uptime and reset counters for power outage statistics User notes can be stored into amplifier memory Fully user configurable alarm limits, severities, enabling and delays Alarm log stored into non-volatile memory for easy troubleshooting Amplifier configuration and accessory information stored in amplifier memory Fast local softwate update via USB also without power supply Additional features available with AC6991 / AC6980 transponder: Remote access to all AC3200 settings and monitored parameters ALSC and modem LEDs for alarm indication CATVisor and HMS compatible remote connection (AC6991) DOCSIS compatible remote connection (AC6980) Interstage gain and slope control by ALSC mode with saturation alarm ALSC pilot frequencies, detector types, backoffs and decision levels are user programmable Automatic reserve pilot switching and ALSC operation with only one pilot User configurable all pilots lost behaviour Forward path automatic alignment Full forward and return path automatic alignment with single button Lid status monitoring with alarm Service terminal connection monitoring with alarm Amplifier configuration change monitoring with alarm Spectrum analyser for forward path level measurement with alarm Ingress analyser for return path level measurement with alarms Automatic ingress switch and return path plug activation and deactivation based on detected ingress with alarms and user configurable delays Modem receive and transmit signal level monitoring with alarms (AC6991) Remote software update to multiple units simultaneously Return path pilot generator with 4 user programmable pilot frequencies and levels (AC6991)

6 Kari Mäki (7) Block diagram Universal plug-in USB LEDS CPU TX RX LEVEL MEAS ºC TRANSPONDER Universal plug-in TP Input module Output module 1 TP / Test injection TP / Test injection IN AC AC OUT 3 / AC OUT 2 AC INPUT BYPASS OUT 1

7 Kari Mäki (7) Ordering Information AC3200 configuration map AC Gain and housing 4-1 Forward path universal plug D 2x 39 universal amplifier X None 1-2 Power supply 4-2 Output module A Local powering, euro plug (230 VAC) A 0 (AC6120) B Remote powering with cable clamp (65 VAC) B Splitter -3.7, (AC6124) C Local powering, UK plug (230 VAC) C Tap -8, (AC6128) D Tap -12, (AC6112) 2-1 Input connection (first from left) E Tap -16, (AC6116) A PG11 F Tap -20, (AC6119) B 5/8" X None C IEC D 3.5/ Return path universal plug E F A Ingress blocker (AC6223) 2-2 Input by-pass/output 3 connection B Ingress blocker (AC6228) A PG11 X None B 5/8" C IEC 6-1 Transponder module D 3.5/12 B Transponder and ALSC module (AC6991) E F C DOCSIS transponder (AC6980) X None (PG11 sealing plug) X None 2-3 Output 2 connection A PG Application software B 5/8" A CATVisor compatible C IEC B HMS compatible D 3.5/ Settings E F X Factory default 2-4 Output 1 connection (first from right) A Customer specified A PG Product keys (software features) B 5/8" X None C IEC A Plug'n'play forward path alignment D 3.5/12 B Spectrum and ingress analyser functionality E F C A + B + Return path pilot generator 3-1 Input module 8-1 Installation manual A 0, no by-pass (AC6110) X None B Splitter -3.7, by-pass in use (AC6124) A Manual C D E F X Tap -8, by-pass in use (AC6128) Tap -12, by-pass in use (AC6112) Tap -16, by-pass in use (AC6116) Tap -20, by-pass in use (AC6119) None 3-2 Diplexer filters D 65/85 MHz (3 x CXF065) E K 85/108 MHz (3 x CXF085) Forward path jumper (3 x CXF000) L 65/85 MHz (3 x CXF065 and 3xCXF000) DOC X None Rev 017

AC3000 INTELLIGENT BROADBAND AMPLIFIER

AC3000 INTELLIGENT BROADBAND AMPLIFIER Kari Mäki 24.9.2012 1(7) AC3000 INTELLIGENT BROADBAND AMPLIFIER AC3000, the most advanced amplifier on the market, is the latest leading-edge addition to AC family with extended frequency and gain ranges

More information

AC GHZ INTELLIGENT BROADBAND AMPLIFIER

AC GHZ INTELLIGENT BROADBAND AMPLIFIER 13.4.2016 1(8) AC3210 1.2 GHZ INTELLIGENT BROADBAND AMPLIFIER Features The AC3210 is a dual active output amplifier with 48 maximum. The amplifier stages are based on extreme high performance GaN solution

More information

ACE3 INTELLIGENT BROADBAND AMPLIFIER

ACE3 INTELLIGENT BROADBAND AMPLIFIER 12.4.2017 1(8) ACE3 INTELLIGENT BROADBAND AMPLIFIER Features ACE3 is the most advanced compact amplifier on the market. It has 1.2 GHz frequency range and integrated electrical controls in both up- and

More information

AC GHZ INTELLIGENT BROADBAND AMPLIFIER

AC GHZ INTELLIGENT BROADBAND AMPLIFIER 13.4.2016 1(8) AC3010 1.2 GHZ INTELLIGENT BROADBAND AMPLIFIER Features The AC3010 is a single active output amplifier with 48 db maximum. The amplifier stages are based on extreme high performance GaN

More information

AC2000 AMPLIFIER PLATFORM

AC2000 AMPLIFIER PLATFORM Broadband Cable Networks / Kari Mäki June 26, 2008 1(6) 2000 AMPLIFIER PLATFORM The 2000 is a dual active output amplifier with 2 x 39 of gain. The input and output amplifier stages are both based on high

More information

Downstream signal path (values with diplex filters)

Downstream signal path (values with diplex filters) 23.5.2016 1(8) Technical specifications Parameter Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20 db 1) Operational distribution gain

More information

AC GHZ DISTRIBUTION AND TRUNK AMPLIFIER

AC GHZ DISTRIBUTION AND TRUNK AMPLIFIER 30.11.2015 1(7) 2500 1.2 GHZ DISTRIBUTION AND TRUNK AMPLIFIER The 2500 is a dual active output amplifier with 2 x 43 operational. This product can be used as high distribution amplifier, but also as a

More information

ACE2 INTELLIGENT BROADBAND AMPLIFIER

ACE2 INTELLIGENT BROADBAND AMPLIFIER 26.5.2017 1(6) ACE2 INTELLIGENT BROADBAND AMPLIFIER Features ACE2 is the most advanced compact amplifier on the market. It has 1.2 GHz frequency range and integrated electrical controls in both up- and

More information

ACE8 1.2 GHZ INTELLIGENT OPTICAL NODE

ACE8 1.2 GHZ INTELLIGENT OPTICAL NODE 9.5.2014 1(6) ACE8 1.2 GHZ INTELLIGENT OPTICAL NODE Features ACE8 is a single active output intelligent node. The node is based on a fixed receiver but modular upstream transmitter. The output amplifier

More information

CXE202 UNIVERSAL AMPLIFIER

CXE202 UNIVERSAL AMPLIFIER Broadband Cable Networks / Kari Mäki June 14, 2010 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according

More information

AC1000 AMPLIFIER & OPTICAL NODE PLATFORM

AC1000 AMPLIFIER & OPTICAL NODE PLATFORM Broadband Cable Networks / Kari Mäki February 6, 2008 1(11) AC1000 AMPLIFIER & OPTICAL NODE PLATFORM The AC1000 is a single active output amplifier with 29 or 39 of platforms. Both platforms can be used

More information

AC GHZ DISTRIBUTION AMPLIFIER

AC GHZ DISTRIBUTION AMPLIFIER 23.5.2016 1(8) C1500 1.2 GHZ DISTRIBUTION MPLIFIER Technical specifications Parameter Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20

More information

AC500 AMPLIFIER PLATFORM

AC500 AMPLIFIER PLATFORM Broadband Cable Networks / Kari Mäki March 18, 2004 1(6) AC500 AMPLIFIER PLATFORM The AC500 is a single active output amplifier with 39 of gain. The amplifier can be used as in distribution purposes in

More information

CXE101 DISTRIBUTION AMPLIFIER

CXE101 DISTRIBUTION AMPLIFIER Broadband Cable Networks / Kari Mäki February 9, 2006 1(5) CXE101 DISTRIBUTION AMPLIFIER The CXE101 is a compact distribution amplifier. It is having all the modern features in flexible format. The important

More information

AC8800 INTELLIGENT FIBRE OPTIC PLATFORM

AC8800 INTELLIGENT FIBRE OPTIC PLATFORM Kari Mäki 27.5.2010 1(7) AC8800 INTLLIGNT FIBR PTIC PLATFRM The AC8800 is a dual active output node. It is based on fixed platform but flexible modular solution. It supports two optical receivers with

More information

CXE180 UNIVERSAL AMPLIFIER

CXE180 UNIVERSAL AMPLIFIER Kari Mäki 20.9.2012 1(6) CXE180 UNIVERSAL AMPLIFIER The CXE180 is a compact dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according to wanted operation.

More information

CXE202 UNIVERSAL AMPLIFIER

CXE202 UNIVERSAL AMPLIFIER Broadband Cable Networks / Kari Mäki November 23, 2006 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according

More information

CXE180 UNIVERSAL AMPLIFIER

CXE180 UNIVERSAL AMPLIFIER Kari Mäki 14.6.2010 1(5) CXE180 UNIVERSAL AMPLIFIER The CXE180 is a compact dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according to wanted operation.

More information

Downstream signal path (values with diplex filters) Upstream signal path (values with diplex filters)

Downstream signal path (values with diplex filters) Upstream signal path (values with diplex filters) PRODUT SPEIFITION 3210 3.11.2016 1 ( 7 ) Technical specifications Paramete Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20 db 1) Maximum

More information

AC9000 INTELLIGENT FIBRE OPTIC PLATFORM

AC9000 INTELLIGENT FIBRE OPTIC PLATFORM Kari Mäki 20.12.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting

More information

AC9000 INTELLIGENT FIBRE OPTIC PLATFORM

AC9000 INTELLIGENT FIBRE OPTIC PLATFORM Kari Mäki 4.4.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting

More information

CXE100 DISTRIBUTION AMPLIFIER

CXE100 DISTRIBUTION AMPLIFIER Broadband Cable Networks / Kari Mäki April 5, 2005 1(5) CXE100 DISTRIBUTION AMPLIFIER The CXE100 is a compact distribution amplifier. It is having all the modern features in flexible format. The important

More information

AC800 FIBRE OPTIC NODE

AC800 FIBRE OPTIC NODE Broadband Cable Networks / Kari Mäki January 11, 2007 1(6) AC800 FIBRE OPTIC NODE The AC800 is a single active output node. It is based on fixed receiver concept but new features can be added by flexible

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 29.4.2015 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 21.4.2011 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 4.3.2008 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 8.1.2008 1(5) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

AC8000 FIBRE OPTIC PLATFORM

AC8000 FIBRE OPTIC PLATFORM Kari Mäki 5.5.2008 1(7) AC8000 FIBR PTIC PLATFRM The AC8000 is a dual active output node. It is based on fixed platform but flexible modular solution. There is possible to have an optical receiver with

More information

TELESTE AC AMPLIFIER MODULES

TELESTE AC AMPLIFIER MODULES TELESTE AC AMPLIFIER MODULES AC 6110 INPUT MODULE AC6110 is an input module with 0 db attenuation. Supports frequencies up to 1.2 GHz. 0 db jumper module to be used as an input module in AC-amplifier platform

More information

TELESTE AC NODE SPECIFIC MODULES

TELESTE AC NODE SPECIFIC MODULES TELESTE AC NODE SPECIFIC MODULES AC 6310 Power supply module for Teleste AC8000 and AC8800 optical nodes. Can work alone or it can be operated parallel to split the work load and create the redundancy

More information

HDO907 CATV FIBRE TRANSMITTER

HDO907 CATV FIBRE TRANSMITTER Timo Rantanen 18.2.2015 1(6) HDO907 CATV FIBRE TRANSMITTER HDO907 is a high performance, linear and directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks.

More information

HDO905 CATV FIBRE TRANSMITTER

HDO905 CATV FIBRE TRANSMITTER Timo Rantanen 23.8.2011 1(6) HDO905 CATV FIBRE TRANSMITTER HDO905 is a high performance, linear directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks. The

More information

DVO902 E/S CATV FIBRE TRANSMITTER

DVO902 E/S CATV FIBRE TRANSMITTER Timo Rantanen 24.7.2007 1(5) DVO902 E/S CATV FIBRE TRANSMITTER DVO902 E and S types are high performance, extremely linear DFB laser transmitters for DVO fibre optic CATV link. DVO902 is available on different

More information

Compact amplifiers BROADBAND

Compact amplifiers BROADBAND Compact amplifiers BROADBAND Trunk, distribution network, equaliser and house connection amplifiers; controlled and uncontrolled 2 I Kathrein I Company Portrait Who we are and what we stand for Kathrein

More information

Diamond Line 3 Single Output Amplifiers

Diamond Line 3 Single Output Amplifiers Diamond Line 3 Single Output Amplifiers About this Section In this section, you will find the following reference information about the Diamond Line 3 single output amplifiers: Item...Page Equipment Description...9

More information

HDO772 C-BAND DWDM FIBRE TRANSMITTER

HDO772 C-BAND DWDM FIBRE TRANSMITTER Timo Rantanen 19.9.2012 1(6) HDO772 C-BAND DWDM FIBRE TRANSMITTER HDO772 is a high performance directly modulated C-band DWDM transmitter for forward path fibre optic links in CATV and FTTx networks. HDO772

More information

ASEM MOTO BLE & MB Distribution Amplifiers 1002 MHz

ASEM MOTO BLE & MB Distribution Amplifiers 1002 MHz BLE (1 Output Line Extender) MB (2 or 3 Output Bridger) ASEM MOTO BLE & MB Distribution Amplifiers 1002 The ACI ASEM Moto BLE and MB 1G RF upgrade modules are now offered with the Gallium Nitride (GaN)

More information

ADVANCED SYSTEM DESIGN PRODUCT SPECIFICATIONS BT*/* STARLINE Broadband Telecommunications Amplifier

ADVANCED SYSTEM DESIGN PRODUCT SPECIFICATIONS BT*/* STARLINE Broadband Telecommunications Amplifier BT*/* STARLINE Broadband Telecommunications Amplifier FEATURES OF THE BT*/*: 750 MHz or 870 MHz power doubling technology in enhanced GaAs (E-GaAs) or silicon High gain (40 db operational) Five diplex

More information

Cisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/ MHz

Cisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/ MHz Data Sheet Cisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/102-1002 MHz Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators

More information

GainMaker Line Extender 1 GHz with 65/86 MHz Split

GainMaker Line Extender 1 GHz with 65/86 MHz Split RF Electronics GainMaker Line Extender 1 GHz with 65/86 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s

More information

The BT87 also offers high gain. This allows the operator to hold existing amplifier locations during system upgrades thereby reducing system costs.

The BT87 also offers high gain. This allows the operator to hold existing amplifier locations during system upgrades thereby reducing system costs. BT87 870 MHz Amplifier STARLINE Series Motorola s STARLINE series amplifier, model BT87*/*, leads the industry in features and performance and is designed to meet the needs of today's expanding broadband

More information

Diamond Line Type 1 and Type 2 Amplifiers

Diamond Line Type 1 and Type 2 Amplifiers TM Diamond Line Type 1 and Type 2 Amplifiers Reference & Installation Manual Part Number: 2244001 Rev. D 06/03 Diamond Line Series Type 1 and Type 2 Amplifiers Reference and Installation Manual 2244001

More information

MBV3 1 GHz Amplifier MODEL

MBV3 1 GHz Amplifier MODEL MBV3 1 GHz Amplifier STARLINE MODEL SERIES Motorola s 1 GHz STARLINE Mini-Bridger series amplifier, model MBV3*, leads the industry in features and performance and is designed to meet the needs of today's

More information

GainMaker Line Extender 1 GHz with 42/54 MHz Split

GainMaker Line Extender 1 GHz with 42/54 MHz Split RF Electronics GainMaker Line Extender 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s

More information

Compact Node Optoelectronics

Compact Node Optoelectronics ptoelectronics Compact Node 90075 Description The Compact Model 90075 Node is Scientific-Atlanta s latest addition to its family of Compact nodes. The node offers maximized coverage for network designs

More information

OPTICAL NODE TRUNK & DISTRIBUTION

OPTICAL NODE TRUNK & DISTRIBUTION OPTICAL NODE TRUNK & DISTRIBUTION OPTI 100RX - OPTI 200RX - OPTI 300RX Version 2 Page 1 OPTI INTRODUCTION OPTI is a broadband distribution node designed to be used as a compact, multiport optical node

More information

GainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split

GainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split RF Electronics GainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent

More information

Compact Model Fiber Deep Node 862 MHz with 42/54 MHz Split

Compact Model Fiber Deep Node 862 MHz with 42/54 MHz Split Optoelectronics Compact Model 90090 Fiber Deep Node 862 MHz with 42/54 MHz Split Description The Scientific-Atlanta Compact Model 90090 Fiber Deep Node is a small, low-cost, 110V AC powered node that addresses

More information

1 GHz SASMAX II series

1 GHz SASMAX II series 1 GHz SASMAX II series SASMAX II Line Extender (Legacy LEII style) Description: The 1 GHz SASMAX II series broadband line extender is essentially a drop-in-upgrade module that allows the customer to perform

More information

GainStar 1 GHz Node with 42/54 MHz Split

GainStar 1 GHz Node with 42/54 MHz Split GainStar 1 GHz Node with 42/54 MHz Split The 1 GHz GainStar Node (GSN) is specifically designed to serve in HFC networks. With its modular design of Optics and RF amplifier electronics, the GSN can provide

More information

CATV Product Family MEDIALINE 2000

CATV Product Family MEDIALINE 2000 CATV Product Family MEDIALINE 2000 www.motorola.com/broadband/emea Motorola BCS UK Imperium, Imperial Way Reading, Berkshire RG2 0TD United Kingdom Motorola BCS Germany (Fuba Communications Systems GmbH)

More information

ADVANCED SYSTEM DESIGN PRODUCT SPECIFICATIONS MBE*/*

ADVANCED SYSTEM DESIGN PRODUCT SPECIFICATIONS MBE*/* STARLINE MiniBridger Express Amplifier FEATURES OF THE : 870 MHz bandwidth 28 db operational gain for trunk port, 37 db operational gain for bridger ports 16 db return loss 60/90 V powering Meets Telcordia

More information

GainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split

GainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split Optoelectronics GainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent

More information

GainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split

GainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split RF Electronics GainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the

More information

GainMaker High Output HGBT System Amplifier 5-40/ MHz

GainMaker High Output HGBT System Amplifier 5-40/ MHz RF Electronics GainMaker High Output HGBT System Amplifier 5-40/52-1002 MHz Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of

More information

VGF Compact amplifiers

VGF Compact amplifiers VGF Compact amplifiers Contents VGP 9040D Page 4 VGP 9040/VGF 9040 Page 6 VGP 9240 Page 10 New Product VGP 9043D-1G Page 13 New Product VGF 939D-1G Page 16 VGF 939-1G/VGO 939-1G Page 19 VOS 952-1G/953-1G

More information

Flex Max. RF Amplifiers FM601e T/B. 1 GHz Trunk and Bridger Amplifiers FEATURES PRODUCT OVERVIEW. arris.com

Flex Max. RF Amplifiers FM601e T/B. 1 GHz Trunk and Bridger Amplifiers FEATURES PRODUCT OVERVIEW. arris.com arris.com Flex Max RF Amplifiers FM601e T/B 1 GHz Trunk and Bridger Amplifiers FEATURES Simplify plant upgrades with modular RF design Improve amplifier reach with optional GaN technology and increased

More information

Flex Max RF Amplifiers

Flex Max RF Amplifiers arris.com Flex Max RF Amplifiers FM601e T/B 1 GHz Trunk and Bridger Amplifiers FEATURES Simplify plant upgrades with modular RF design Improve amplifier reach with optional GaN technology and increased

More information

Compact Nodes and 90071

Compact Nodes and 90071 Fiber ptics Compact Nodes 90070 and 90071 Dedicated ptimized Nodes The 90070 receiver node is designed for long distance trunk applications to feed architectures of any density. Dual output with enhanced

More information

750 MHz Magnamax series

750 MHz Magnamax series 750 MHz Magnamax series MLE3007RMLE Magnamax Line Extender (Legacy RMLE style) Description: The 750 MHz Magnamax series broadband line extender is essentially a drop-in-upgrade module that allows the customer

More information

BROADBAND DROP AMPLIFIER

BROADBAND DROP AMPLIFIER BDA BROADBAND DROP AMPLIFIER FEATURES 1 GHz Gallium Arsenide Technology 2.5 db Noise Figure Patented Auto-Seize P-Series F- Connector One, Two or Four Port Versions Two-Way Capable LED Power Verification

More information

ODN4P. Optical Distribution Node, Four Ports. About the Product

ODN4P. Optical Distribution Node, Four Ports. About the Product About the Product The Light Link Series 2, deep-fibre Optical Distribution Node ODN4P is a prime building block for highperformance networks, designed for adaptability, scalability and optional return-path

More information

HFC 1. Compact Amplifiers. Trunk, distribution network, equaliser and house

HFC 1. Compact Amplifiers. Trunk, distribution network, equaliser and house Compact Amplifiers Controlled and uncontrolled amplifiers for: - trunk networks - distribution networks - active equalisation - house connection Trunk, distribution network, equaliser and house HFC 1 HFC

More information

Cisco 1218 MHz GainMaker High Gain Dual (HGD) System Amplifier

Cisco 1218 MHz GainMaker High Gain Dual (HGD) System Amplifier Data Sheet Cisco 1218 MHz GainMaker High Gain Dual System Amplifier Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators with DOCSIS-based equipment will

More information

GainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split

GainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split RF Electronics GainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent

More information

Opti Max Optical Node Series

Opti Max Optical Node Series arris.com Opti Max Optical Node Series OM6000 1.2 GHz 4x4 HFC Segmentable Node FEATURES Supports 1.2 GHz Downstream and 204 MHz Upstream bandpass for DOCSIS 3.1 migration Integrated segmentation switches

More information

Cisco 1218 MHz GainMaker High-Gain Balanced Triple System Amplifier

Cisco 1218 MHz GainMaker High-Gain Balanced Triple System Amplifier Data Sheet Cisco 1218 MHz GainMaker High-Gain Balanced Triple System Amplifier Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators with DOCSIS-based equipment

More information

BDA Broadband Drop Amplifier

BDA Broadband Drop Amplifier BDA Broadband Drop Amplifier FEATURES 1 GHz Gallium Arsenide Technology 2.5 db Noise Figure Patented Auto Seize FFT F Connector One, Two, or Four Port Versions Two Way Capable LED Power Verification Local

More information

MODEL BTN GHz OPTICAL NODE STARLINE SERIES

MODEL BTN GHz OPTICAL NODE STARLINE SERIES MODEL BTN100 1 1 GHz OPTICAL NODE STARLINE SERIES The BTN100 optical node complements evolving fiber-deep networks by providing operators with a low cost amplifier to node drop in conversion with flexibility

More information

STARLINE Series BT100

STARLINE Series BT100 STARLINE Series BT100 1 GHz Amplifier FEATURES Simplify plant upgrades with modular RF design and 1.2 GHz capable housing Improve amplifier reach with optional GaN technology and increased station tilt

More information

MB100 MODEL. STARLINE MINI-BRIDGER SERIES 1GHz AMPLIFIER.

MB100 MODEL. STARLINE MINI-BRIDGER SERIES 1GHz AMPLIFIER. MODEL MB100 STARLINE MINI-BRIDGER SERIES 1Gz AMPLIFIER Product Overview Motorola s 1 Gz STARLINE MB100 Mini- Bridger Amplifier leads the industry in features and performance. This two-way capable, dual-output

More information

WIRELESS INSULATOR POLLUTION MONITORING SYSTEM

WIRELESS INSULATOR POLLUTION MONITORING SYSTEM SYSTEM OVERVIEW Pollution monitoring of high voltage insulators in electrical power transmission and distribution systems, switchyards and substations is essential in order to minimise the risk of power

More information

MODEL BLN GHz FIBER DEEP NODE STARLINE SERIES

MODEL BLN GHz FIBER DEEP NODE STARLINE SERIES MODEL BLN100 1 1 GHz FIBER DEEP NODE STARLINE SERIES The BLN100 optical node is an essential building block in evolving Hybrid Fiber Coaxial (HFC) network architectures enabling amplifier to node conversions.

More information

ACI SDAF MHz Miniflex Configurable Bridger Amplifier

ACI SDAF MHz Miniflex Configurable Bridger Amplifier ACI SDAF MHz Miniflex Configurable Bridger Amplifier Overview SDAF MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN

More information

ALX. 870 MHz Line Extender

ALX. 870 MHz Line Extender ALX 870 MHz Line Extender Overview ALX 870 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber to fiber, HFC (hybrid fiber coaxial), or PDN (power domain node) architectures.

More information

Model 6942 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split

Model 6942 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split Optoelectronics Model 6942 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6942 Node is a high performance, four output optoelectronic node. The Model 6942 Node can be configured

More information

User Manual CXE Rev.002 Broadband Cable Networks March 3, (10) CXX Series. User Manual. Teleste Corporation CXE880.

User Manual CXE Rev.002 Broadband Cable Networks March 3, (10) CXX Series. User Manual. Teleste Corporation CXE880. Broadband Cable Networks March 3, 2008 1(10) CXX Series User Manual Teleste Corporation CXE880 Fibre Node Broadband Cable Networks March 3, 2008 2(10) Introduction The CXE880 is a fibre deep optical node

More information

rf link 870 mhz mini-bridger

rf link 870 mhz mini-bridger application ANTEC s 870 MHz Mini-Bridger is deployed in the RF network as either a two or three output device. The Mini-Bridger provides a flexible high gain and high level PHD platform that is cost-effective

More information

SDA and ALX MiniFlex Super Distribution Amplifiers 1002 MHz

SDA and ALX MiniFlex Super Distribution Amplifiers 1002 MHz SDA and AX MiniFlex Super Distribution Amplifiers 002 Mz The ACI MiniFlex super distribution amplifiers are now offered with the Gallium Nitride (GaN) hybrid technology that allows for 3 higher output

More information

GainMaker High Output Node 5-40/ MHz

GainMaker High Output Node 5-40/ MHz Optoelectronics GainMaker High Output Node 5-40/52-1002 MHz Description The GainMaker High Output Node is designed to serve as an integral part of today s network architectures, and combines the superior

More information

Cisco 1.2GHz GainMaker Line Extender (GMLE)

Cisco 1.2GHz GainMaker Line Extender (GMLE) Data Sheet Cisco 1.2GHz GainMaker Line Extender (GMLE) The Cisco 1.2GHz GainMaker GaN System Amplifier is the latest-generation broadband amplifier in the Cisco GainMaker platform. Gallium nitride (GaN)

More information

ACI SDLA. Miniflex Line Extender 1002 MHz

ACI SDLA. Miniflex Line Extender 1002 MHz ACI SDLA Miniflex Line Extender 1002 MHz Overview SDLA 1002 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN (power

More information

GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split

GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split Data Sheet GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split The Cisco GainMaker High Output 4-Port Node with 40/52 MHz Split is designed to serve as an integral part of today s network architectures.

More information

BDA Broadband Drop Amplifier

BDA Broadband Drop Amplifier BDA Broadband Drop Amplifier FEATURES 1 GHz Gallium Arsenide Technology 2.5 db Noise Figure Patented Auto Seize FFT P Series F Connector One, Two, or Four Port Versions Two Way Capable LED Power Verification

More information

Model 6940 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split

Model 6940 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split Optoelectronics Model 6940 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6940 Node is a high performance, four output optoelectronic node. The Model 6940 Node can be configured

More information

Mounting Instruction. Compact Mini EGC Amplifier and Application

Mounting Instruction. Compact Mini EGC Amplifier and Application Mounting Instruction Compact Mini EGC Amplifier 93230 and 93240 Application The Compact Mini EGC Amplifier type 93230 and type 93240 has one active output and is mainly used as distribution amplifier.

More information

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis

More information

TXS. Amplifiers UHF,DAB and Band 2 Inputs TS dB Gain 108dBuV output* *Output Levels are to DIN. Ideal for Seperate Inputs FM,DAB,UHF

TXS. Amplifiers UHF,DAB and Band 2 Inputs TS dB Gain 108dBuV output* *Output Levels are to DIN. Ideal for Seperate Inputs FM,DAB,UHF TXS Amplifiers UHF,DAB and Band 2 Inputs For indoor mounting Metal housing with plastic side brackets High input selection F-Connectors TS3048 Ideal for Seperate Inputs FM,DAB,UHF If connecting directly

More information

Acterna DSAM Product Family

Acterna DSAM Product Family Acterna DSAM Product Family Digital Service Activation Meters Quick-Start Guide DSAM-1500, -2500. -2600, -3500, 3600 Specifications DSAM-1500, -2500. -2600, -3500, 3600 Specifications Product Specifications

More information

Q-SERIES. Amplifiers. QPAIR Redundancy Switch Amplifier System. Installation & Operation Manual

Q-SERIES. Amplifiers. QPAIR Redundancy Switch Amplifier System. Installation & Operation Manual Q-SERIES Amplifiers QPAIR Redundancy Switch Amplifier System Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice,

More information

GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split

GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split Data Sheet GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split The GainMaker High Output Reverse Segmentable (RS) Node is designed to serve as an integral part of today s network architectures.

More information

GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split

GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The

More information

87415A microwave system amplifier A microwave. system amplifier A microwave system amplifier A microwave.

87415A microwave system amplifier A microwave. system amplifier A microwave system amplifier A microwave. 20 Amplifiers 83020A microwave 875A microwave 8308A microwave 8307A microwave 83006A microwave 8705C preamplifier 8705B preamplifier 83050/5A microwave The Agilent 83006/07/08/020/050/05A test s offer

More information

User Manual CXE Rev (12) CXX Series. User Manual. Teleste Corporation. CXE880 Fibre node

User Manual CXE Rev (12) CXX Series. User Manual. Teleste Corporation. CXE880 Fibre node 17.12.2012 1(12) CXX Series User Manual Teleste Corporation CXE880 Fibre node 17.12.2012 2(12) Contents Introduction... 3 Installation... 3 Housing... 3 Powering... 3 Status monitoring card (optional)...

More information

GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split

GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The

More information

Upstream Challenges With DOCSIS 3.1

Upstream Challenges With DOCSIS 3.1 Upstream Challenges With DOCSIS 3.1 White Paper A Technical Paper prepared for SCTE/ISBE by Jan Ariesen Chief Technology Officer Technetix Inc 2017 SCTE-ISBE and NCTA. All rights reserved. Title Table

More information

RF LINK 750 MHz PAL LINE EXTENDER

RF LINK 750 MHz PAL LINE EXTENDER APPLICATION ARRIS series of 750 MHz PAL Line Extenders are typically deployed in the feeder or tapped portion of the RF network. Configurable as either single or dual output devices, these amplifiers provide

More information

Advantages. - Curved insertion loss simulating coaxial cable - Best in class return on investment (ROI)

Advantages. - Curved insertion loss simulating coaxial cable - Best in class return on investment (ROI) Advantages - Curved insertion loss simulating coaxial cable - Best in class return on investment (ROI) signia splitters Product information The Signia splitter series follows the tradition of the Master

More information

Triax Multiband and Distribution Amplifiers for community networks. Flexibility from trunk line to subscriber in current to future networks

Triax Multiband and Distribution Amplifiers for community networks. Flexibility from trunk line to subscriber in current to future networks Triax Multiband and Distribution Amplifiers for community networks Flexibility from trunk line to subscriber in current to future networks 1 P owerful, reliable and easy to install HFA Distribution Amplifiers

More information

Optical Compact Receivers ORA G, ORA G. and ORA 920/921. Antennen Electronic

Optical Compact Receivers ORA G, ORA G. and ORA 920/921. Antennen Electronic Optical Compact Receivers ORA 9222-1G, ORA 9022-1G 2013 and ORA 920/921 Antennen Electronic Optical Compact Receiver ORA 9222-1G SCALABLE OPTICAL COM New features: Higher accuracy across the entire level

More information