3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC
|
|
|
- Clarissa Campbell
- 6 years ago
- Views:
Transcription
1 M Cable Assembly Supports Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded with foil and braid for additional signal protection Rugged MDR ribbon type contact Rugged thumbscrew retention EMI shielded junction shell in either plastic or overmolded construction See the Regulatory Information Appendix (RIA) in the RoHS compliance section of for compliance information (RIA E1 & C1 apply) Date Modifi ed: May 18, 2011 Sheet 1 of 4 Physical Electrical Contact Plating Wiping Area: 0 µ [ 0.76 µm ] Min. Gold Shell Color: eige Shell Material: Overmold Option: Polyvinyl Chloride (PVC); Shell Kit Option: Polyester Elastomer Cable Color: eige Cable Jacket Material: Polyvinyl Chloride (PVC) Cable Flammability: AWM VW-1 Voltage Rating: 0 V Current Rating: 1 A Insulation Resistance: > Ω V DC Withstanding Voltage: 50 V rms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 ± 10Ω Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Skew (within pair): 50 ps/meter maximum Skew (channel skew per chipset): 50 ps/meter maximum Environmental Temperature Rating: -20 C to +75 C UL File No.: E86982 CameraLink is a trademark of the Automated Imaging Association. M is a trademark of M Company
2 M Cable Assembly Discrete #4-40 Thumbscrew Shell Kit Cable (See pinout for cable construction) Version Thumbscrews Thumbscrews 2.5 [1.28] LENGTH (See ordering information) 2.5 [1.28] Overmold #4-40 Thumbscrew Shell 26 Position High Density Mini D Ribbon (MDR) Cable (See pinout for cable construction) T Version Thumbscrew 45.7 [1.8] LENGTH (See ordering information) Thumbscrew 45.7 [1.8] mm [Inch] Tolerance Unless Noted mm ±.1 ±.01 [ ] Dimensions for Reference only Assembly Length Tolerance Cable Length Tolerance 0.5 to 1.5 meters meters 2 to 10 meters -0 +% of length Sheet 2 of 4 M is a trademark of M Company
![M Cable Assembly mm [Inch] Tolerance Unless Noted 0.0 0.00 mm ±.1 ±.](/docs-images/73/68874908/images/3-0.jpg "01 [ ] Dimensions for Reference only 2 4 5 6 7 8 9 10 1 11 12 1 14 15 16 17 18 19 20 21 22 2 24 25 26 C Generic End Detail MDR 26 Position Plug (oth Ends) Shell Option (see ordering information) T =")
3 M Cable Assembly mm [Inch] Tolerance Unless Noted mm ±.1 ±.01 [ ] Dimensions for Reference only C Generic End Detail MDR 26 Position Plug (oth Ends) Shell Option (see ordering information) T = Overmold #4-40 Thumbscrew Shell = Discrete #4-40 Thumbscrew Shell Kit 40.2 [ 1.58 ] 9.4 [ 1.55 ] Dimensions C 14.0 [.55 ] 12.8 [.51 ] Ordering Information 14X26-SZL-XXX-0LC Length: Shell Retention Options: = Discrete #4-40 Thumbscrew shell kit T = Overmold #4-40 Thumbscrew shell 050 = 0.5 meters 450 = 4.5 meters 100 = 1 meters 500 = 5 meters 150 = 1.5 meters 600 = 6 meters 200 = 2 meters 700 = 7 meters 250 = 2.5 meters 800 = 8 meters 00 = meters 900 = 9 meters 50 =.5 meters A00 = 10 meters 400 = 4 meters Sheet of 4 M is a trademark of M Company
4 M Cable Assembly Camera Cable Assembly and Camera Link Pinouts Medium and Full Configurations ase Configuration Two Channel Link Chips Frame Grabber Channel Link Signal Cable Name (Reference only) One Channel Link Chip + Camera Control + Serial Communication Camera Frame Grabber Channel Link Signal 1 1 inner shield inner shield 1 1 inner shield inner shield inner shield inner shield 2 25 Y0- Pair X Y0+ Pair X0+ 24 Y1- Pair 2-24 X Y1+ Pair X Y2- Pair X Y2+ Pair X Yclk- Pair Xclk Yclk+ Pair Xclk Y- Pair X Y+ Pair X ohm Pair SerTC terminated Pair SerTC Z0- Pair SerTFG Z0+ Pair SerTFG Z1- Pair CC Z1+ Pair CC Z2- Pair CC Z2+ Pair CC Zclk- Pair CC- 24 Zclk+ Pair CC Z- Pair CC Z+ Pair CC4-1 1 inner shield inner shield 1 1 inner shield inner shield inner shield inner shield Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped aluminum out and are in contact with four internal drains (logic ground).. Outer braid and foil (chassis ground) are isolated from inner drains (logic ground). 4. Cable assembly compatible with Camera Link ase, Medium and Full configurations. Sheet 4 of 4 M is a trademark of M Company
5 Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. efore using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, UT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTAILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place lvd. Austin, TX U.S.A Please recycle. Printed in USA. M All rights reserved. RIA-2217-E M is a trademark of M Company.
3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZB-XXX-04C Flexible cable enables moving head applications. Mates to popular M MDR 26 position receptacle
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires
3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised
Page 1 of 7 Product Specification 78-5102-0099-7 Revised 11-16-11 Contents Title Page and Contents......................................................... 1 1.0 Scope....................................................................
Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36
PRODUCT SPECIFICATION 3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36 PS-0082 Rev. B Page 1 of 8 3M 2012. All rights Reserved Table of Contents Section Content Page Cover page 1 Contents
3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions Contents 1.0 Purpose....................................... 1 2.0 Development Kits..................................
Product Specification. 3M Cable Assemblies for QSFP+ FDR Applications, Copper
78-5102-0198-7 A Product Specification 3M Cable Assemblies for QSFP+ FDR Applications, Copper Document Number: 78-5102-0198-7 A Issue Date: Jul 04, 2014 Subject: 3M Cable Assemblies for QSFP+ FDR Applications
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.:
Signal Integrity Test Report
PD-0098 Signal Integrity Test Report 3M External MiniSAS Cable Assemblies 3 Electronic Solutions Division Subject: 3M External MiniSAS Cable Assembly Page: 1 of 14 Table of Contents 1.0 Scope... 2 2.0
TABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 General Description: PTZ (CCTV+Control+Power) Cable, Rated-CM, 1-RG59 20 AWG solid bare copper with foam polyolefin, 95% bare copper braid, 1-22 AWG stranded
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
Signal Integrity Product Specification
PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4
3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Coax (2-1505A Type) 20 AWG BC, GIFPE isulation, Duofoil plus TC braid (95% cv.), PVC inner jackets. Pairs (4-9451 Type): 22 AWG TC, PP insul.,
3M Dynatel Triple Play Customer Service Test Set INS970
3M Dynatel Triple Play Customer Service Test Set Advanced Diagnostics Software Options DELT, SELT and Spectral Analysis The Test Set has the ability to run advanced diagnostics in different scenarios to
HEAVY DUTY COPPER CABLE LUGS
Industrial products we wholesale, you distribute (SEAMLESS TUBULAR) (TIN PLATED) (SEAMLESS TUBULAR) (NON-PLATED) UL LISTED 4909 Rondo Drive, Fort Worth, Texas 76106, USA Telephone: 1-877-732-0342 Fax:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3 Instructions October 2013 3 1.0 Table of contents 1.0 Summary...3 2.0 Cable and Fiber Preparation...4
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July 2011 3 Contents 1.0 General... 3 2.0 Cabinet Overall Description... 3 3.0 Tools Required... 4 4.0 Kit Contents...
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
Part Number: 7953A Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor
Part Number: Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor Product Description Four Cat 6 23 AW G solid bare copper conductors, bonded pair polypropylene insulation,
Scotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Banana Peel Composite - (2) Cat 5e 4-pair 24 AWG unshielded plus (2) Series 6 Coax with Duobond IV Quad shield, polyolefin insulation on the
MINI-SAS HIGH DENSITY
MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity s (TE s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount
3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723
Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically
Product Data Sheet. 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper
78-512-114-4 D Product Data Sheet 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper Subject: 3M Cable Assemblies for SFP+ Applications Page: 1 of 14 Table of Contents 1. SCOPE...
Detailed Specifications & Technical Data
Description: Series 11, 14 AWG solid.064" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, Duobond IV quad shield (60% and 40% coverage), PVC jacket Physical Characteristics
DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, TWELVE INDIVIDUALLY SHIELDED PAIRS 22 (7 X 30) AWG
INCH-POUND MIL-DTL-49285/22B 27 March 2018 SUPERSEDING MIL DTL 49285/22A 1 March 2010 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, TWELVE INDIVIDUALLY SHIELDED PAIRS 22 (7 X 30) AWG Inactive
3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
3M Electrically Conductive Double-Sided Nonwoven Tape 9750
Technical Data October 2013 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Product Description 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 is an isotropically electrical conductive
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
CLB-501B CAMERA LINK BREAKOUT BOX. User s Manual. Document # , Rev 0.2, 3/23/2012 preliminary
CLB-501B CAMERA LINK BREAKOUT BOX User s Manual Document # 201107, Rev 0.2, 3/23/2012 preliminary Vivid Engineering 159 Memorial Drive, Suite F Shrewsbury, MA 01545 Phone 508.842.0165 Fax 508.842.8930
Far End Device II Model 1342
3 Far End Device II Model 1342 Operating Instructions Optimized for ADSL2+ May 2007 78-8130-0876-6-C Table of Contents Introduction...3 Power-up...4 Connecting the 3M Far End Device II...5 Installing,
Detailed Specifications & Technical Data
Description: 24 AWG stranded (7x32) TC conductor, Datalene insulation, pairs individually shielded with bonded Beldfoil with a drain wire and have numbered and color-coded PVC jackets, overall Beldfoil
3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY
3 Dynatel M Series Locating and Marking System NEW- TO- THE- WORLD TECHNOLOGY PIN- POINT ACCURACY SAFETY DAMAGE PREVENTION Introducing the 3M Dynatel M-iD Series Locating and Marking System. NEW TECHNOLOGY
3M Dynatel Far End Device III
3M Dynatel Far End Device III User s Guide PAIR 1 GND CO PAIR 2 F1 F2 STATUS Dynatel Far End Device III 1 1/2 0 Future-Proof Testing Platform February 2009 78-8140-2657-7-A 3 2 3M Dynatel Far End Device
ADVANCED FLAT CABLE SOLUTIONS
ADVANCED FLAT CABLE SOLUTIONS ONTENTS Contents F Flat Ribbon Cable Overview 03 Microzip Summary Sheet 04 Microzip TPO Solid & Stranded 0.025 inch (0.635 mm) 05 Microzip PVC Solid & Stranded 0.025 inch
Four Cat 5e 24 AW G Bonded-Pairs solid bare copper conductors, polyolefin insulation, PVC jacket.
Part Number: 7923A Cat 5e MSHA DataTuff, (4 pr) 24 AW G Solid BC, PO/PVC, EtherNet/IP, CMR, CMX-Outdoor Product Description Four Cat 5e 24 AW G Bonded-Pairs solid bare copper conductors, polyolefin insulation,
Product Data Sheet. 3M SFP+ Direct-Attach Passive Copper Cable Assembly
78-512-114-4 E Product Data Sheet 3M SFP+ Direct-Attach Passive Copper Cable Assembly 3Electronics Materials Solutions Division 681 River Place Blvd. Austin, TX 78726-9 http://www.3m.com/interconnects
Obsolete Document. Dynatel
3 Dynatel 2273ME Cable/Pipe and Fault Locators 2273ME-iD Cable/Pipe/Fault and Marker Locators with id Read/Write 2250ME Cable/Pipe Locators 2250ME-iD Cable/Pipe and Marker Locators with id Read/Write New-to-the-world
DOCUMENT OBSOLETE. Dynatel. 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write
3 Dynatel 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write New-to-the-world technology for locating underground utilities without any doubt. The 3M Dynatel
Specifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators
Specifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators PHYSICAL SPECIFICATIONS SIZE WEIGHT (H X W X D) IN. (CM) (INCLUDING BATTERIES) Transmitter 6.75 x 11.25 x 7.75 (17.2 x 28.6 x 19.7)
H155A02. Product Description. Product Specifications. Technical Specifications. Application. Bend Radius. CCB-Sub-Crush Resistance.
H155A02 Part Number: H155A02 COAX RF H155 FRNC Product Description COAX RF H155 FRNC Product Specifications Application Application 1: Application 2: 50 Ohm low loss coaxial transmission cable designed
Install & Go Cat.8 S/FTP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
SureGrip TM. XWWarning
80PK-22 SureGrip TM Immersion Temperature Probe Instruction Sheet XWWarning To avoid electrical shock, do not use this probe when voltages exceeding 24 V ac rms or 60 V dc are present. The probe tip is
Dynatel Cable/Pipe and Fault Locator 2273M Cable/Pipe, Fault and Marker Locator 2273M-iD
Dynatel Cable/Pipe and Fault Locator 2273M Cable/Pipe, Fault and Marker Locator 2273M-iD GPS Interface Allows Real-Time Mapping Innovative technology for locating underground utilities without any doubt
Microwave Coax Cable
Cable LINCOS microwave coaxial cable basic construction is shown below : Ø 1. Inner Conductor : Solid or Strand Sliver Plated Copper Ø 2. Insulation : Wrapped Low Density PTFE Ø 3. Outer Conductor : Sliver
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 177 2012 Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables NOTICE
WSS-M99P48-A3: 3 Foam Performance, PressureSensitive Adhesive Tape. Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications)
W-M99P48-A3: 3 W-M99P48-A3 Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications) Technical Bulletin November, 2016 3M tested the following adhesive tapes to the Automotive OEM
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Dynatel 2250E/2273E Advanced Cable and Fault Locator
Dynatel 2250E/2273E Advanced Cable and Fault Locator Operators Manual September 1999 78-8097-6500-7-B TABLE OF CONTENTS Introduction... 2 Installing or Replacing the Batteries... 2 Initial Receiver Configuration...
Vi6208, Vi6216, Vi6232 Vi6308, Vi6316, Vi6332
MODELs Vi6208, Vi6216, Vi6232 Vi6308, Vi6316, Vi6332 Automatic Video Compensation UTP Receiver Hubs User s Manual 7810 Trade Street, Suite 100 San Diego, CA 92121, U.S.A. Phone: (858) 484-5209 Fax: (858)
Caledonian. Profibus L2 Indoor BUS CABLE. Application: Construction:
Caledonian www.caledonian-cables.co.uk www.caledonian-cables.net Profibus L2 Indoor Application: This system cable is used to interconnect L2-BUS components. This cable is an economical solution for the
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Addison. Profibus SK Indoor + Outdoor BUS CABLE. Application: Construction:
Addison www.addison-tech.com www.addison-cables.com Profibus SK Indoor + Outdoor Application: The application of these Profibus SK cables are in the cell and field area, just as for conventional types.
Detailed Specifications & Technical Data
RFP Specification #17-11125-C, Exhibit 2 Programmable Light Poles for BART Plaza ENGLISH MEASUREMENT VERSION 1502SB Multi-Conductor - Multimedia Control Cable For more Information please call 1-800-Belden1
Electrical Characteristics Nominal electrical characteristics are shown in Table 1. Attenuation, Comply with ANSI T1.102; discrete values Table 1a.
734A COAXIAL CABLE Application Intended for interconnection of transmission and switching systems equipment. Features UL listed as NEC Type CMR and CSA certified as Type CMR. NORDX/CDT 734A coaxial was
is used in a manner not described in the user documentation.
SPECIFICATIONS SHDB6M-BW-LL Low Leakage Cable for SMU These specifications apply to the m and m SHDB6M-BW-LL. The SHDB6M-BW-LL is a 6 D-sub male to bare wire male low-leakage cable intended for use with
Install & Go Cat.8 STP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 500 Vdc Output Isolation 4 Continuous Short
RF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
Microwave Coax. w w w. t e m p f l e x. c o m ( ) M i l f o r d R d. S o u t h G r a f t o n, M A
Microwave Coax w w w. t e m p f l e x. c o m ( 5 0 8 ) 8 3 9-5 9 8 7 2 6 M i l f o r d R d. S o u t h G r a f t o n, M A 0 1 5 6 0 Microwave Coax Product Description Low Loss, Flexible Microwave products
Amphenol Cable. Features Allows for mass termination Up to 64 conductors
G80.7mm Economical Flat Ribbon 94V-0 A G80 X X XX X FLAT RIBBON CABLE.7mm Up to 64 conductors VARIATION CODE Blank: Standard PACAGING LENGTH NUMBER OF CONDUCTORS : 500 Feet 09: 9 Position : 400 Feet 4:
if it is used in a manner not described in the user documentation.
SPECIFICATIONS SHDB62M-DB62M-LL Low Leakage Cable for SMU These specifications apply to the 1 m and 2 m SHDB62M-DB62M-LL. The SHDB62M-DB62M-LL is a 62 D-sub male to 62 D-sub male low-leakage cable intended
Technical Data July, 2010
3 Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H, E1820H E1715H, E1720H E1515H, E1520H E1015H, E1020H, E1040H, E1060H E1315H, E1320H E1915H, E1915HS, E1920H,
ACT-IR220Li/220LN IrDA Serial Port Adapter
ACT-IR220Li/220LN IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive L1820 L1720 L1520 L1020 L1320 L1920, L1920S L1220 L1120
Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive L1820 L1720 L1520 L1020 L1320 L1920, L1920S L1220 L1120 Technical Data January, 2015 Product Description 3M Cushion-Mount Plus Plate Mounting
Effective: June, 2000 EX-1821 Satellite Display Unit Receiver Installation Manual Models: 4643-*-* 4644-*-9 Since 1937
Effective: June, 2000 LevelPRO Satellite Display Unit Receiver Installation Manual Models: 4643-*-* 4644-*-9 Since 1937 The information contained in this manual was accurate at the time of release. Specifications
Technical Data June, 2008
3 Cushion-Mount Plus Easy Mount Tapes with High Plateside Adhesion E1815H, E1820H E1715H, E1720H E1515H, E1520H E1015H, E1020H, E1040H, E1060H E1315H, E1320H E1915H, E1920H, E1920HS E1215H, E1220H, E1115H,
High Speed Interconnects
High Speed Interconnects The Siemon Interconnect Solutions team has developed a full offering of interconnect assemblies for ultra high-speed point-to-point applications. Supporting speeds up to 40Gb/s
ACT-IR220L/LE IrDA Serial Port Adapter
ACT-IR220L/LE IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
K-Factor Scaler F5140 and Programming Kit F5141 Installation & Operating Instructions
F5140 and Programming Kit F5141 8635 Washington Avenue Racine, WI 53406 USA Tel: 800-433-5263 or 262-639-6770 Fax: 800-245-3569 or 262-639-2267 E-Mail: flo-techsales@racinefed.com www.flo-tech.com TABLE
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 Low Output Ripple 4 500 Vdc Output Isolation
SolderSleeve One-Step Wire and Cable Terminators. Selection Guide
R SolderSleeve One-Step Wire and Cable Terminators Selection Guide Splicing wire to wire Terminating wire to component terminal Terminating coaxial cables Terminating ground wire to cable shield Preinstalled
Install & Go SMARTen (Cat.6A) STP Trunk Cable Assembly General
Install & Go SMARTen (Cat.6A) STP Trunk General Cat 8 Filler Cat.6A U/FTP Horizontal cables (x6) Fan-Out Cables Cat.6A STP Keystones TRUNK CABLE SECTION VIEW Trunk Isometric Front View RiT s Copper Install
Broadband Current Probe Series Operation Manual
Broadband Current Probe Series Operation Manual 1 TABLE OF CONTENTS INTRODUCTION 3 GENERAL INFORMATION 4 OPERATING INSTRUCTIONS 5 FORMULAS 6 MAINTENANCE 7 WARRANTY 8 2 INTRODUCTION CURRENT PROBE SPECIFICATIONS
Understanding and Inspecting THE DIGITAL BUS. by Jim Sparks
Understanding and Inspecting THE DIGITAL BUS by Jim Sparks 1 Means of Avionics Communication Analog Uses variable signals Voltage Amperage Frequency Discrete Changes a signal state Hi or Lo 1 or 0 On or
Broadband Current Probe Series Operation Manual
Broadband Current Probe Series Operation Manual 1 TABLE OF CONTENTS WARRANTY 3 INTRODUCTION 4 GENERAL INFORMATION 5 OPERATING INSTRUCTIONS 6 FORMULAS 7 MAINTENANCE 8 2 WARRANTY INFORMATION A.H. Systems
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
PIN Diode Chips Supplied on Film Frame
DATA SHEET PIN Diode Chips Supplied on Film Frame Applications Switches Attenuators Features Preferred device for module applications PIN diodes supplied are 00% tested, saw cut, and mounted on film frame
Cobra Series D38999/11-35 Active Optoelectronic Cable Adapter, Electrical Interface, Ethernet, Fibre Channel and sfpdp
Cobra Series D38999/11-35 Active Optoelectronic Cable Adapter, Electrical Interface, Ethernet, Fibre Channel and sfpdp Single Duplex Port, Right Angle FEATURES Suitable for Fast Ethernet, Gigabit Ethernet,1x/2xFibre
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings at + 25
User Instructions. Model PS-2001L. Power Supply. Model SPS Power Supply. Audiocom Intercom Systems Rev. A, 4/2001.
User Instructions PS-00L Model PS-00L Power Supply SPS-00 Volume Model SPS-00 Power Supply Audiocom Intercom Systems 950-7699-000 Rev. A, /00 FCC Statement This equipment uses, and can radiate radio frequency
Communication, Control, and Industrial Cable
Communication, Control, and Industrial Cable Specifications subject to change. For complete specifications and availability, visit www.alphawire.com. 291 Get control of demanding applications T he broad