Type MLS 125 C Flatpack, Ultra Long Life, Aluminum Electrolytic Now Available with High Vibration and High Reliability Options
|
|
- Silas Townsend
- 6 years ago
- Views:
Transcription
1 Now Encased in rugged stainless steel, the MLS is perfect for high reliability military systems and applications operating above 85 C. For our highest performing 25 C Flatpacks, choose type HVMLS available in a special stainless steel case for high vibration applications up to 5g. Specify type HRMLS for high reliability Flatpacks which are subjected to MIL level burn-in processes to ensure established reliability. Specifications Temperature Range 55 C to +25 C Rated Voltage Range 5. Vdc to 25 Vdc Capacitance Range 22 µf to 47, µf Capacitance Tolerance ±2% Highlights - Near-hermetic welded seal - Stainless-steel case - years expected operating life - Withstands more than 8, feet altitude - Type HV up to 5g - Type HR, High Reliability Leakage Current Ripple Current Multipliers.2 CV 25 C and 5 mins. Case Temperature 45 C 55 C 65 C 75 C 85 C 95 C 5 C 5 C 25 C Ambient Temperature, No Heatsink 45 C 55 C 65 C 75 C 85 C 95 C 5 C 5 C 25 C Frequency 5 Hz 6 Hz 2 Hz 36 Hz khz 5 khz khz & up 5 to 4 V to 25 V Low Temperature Characteristics Impedance ratio: Z 55 ⁰C Z +25 ⁰C (5-2 Vdc) 2 (25-25 Vdc) Endurance Life Test, full load at 85 C Capacitance ±% ESR 2% of limit DCL % of limit DC Life Test 2 h at rated voltage &25 C Capacitance ±% ESR 2% of limit DCL % of limit Shelf Life Test 5 h at 25 C Capacitance % of limit ESR % of limit DCL % of limit Vibration Mounting: Vibration capability is dependent upon mounting restraint. The optional welded mounting tabs, alone, are not capable of sustaining the high vibration levels. To achieve the high vibration levels as published on right, additional mounting restraint is required. Standard MLS Flatpack: g Hz to 2 khz Sine Swept,.6 pp max and g. Type HVMLS Flatpack.5 and 2. case length, 5g Type HVMLS Flatpack 2.5 and 3. case length, 3g MIL-STD-22, Meth. 24, Sine Swept, IEC
2 Vibration Test Level The specimens, while deenergized or operating under the load conditions specified, shall be subjected to the vibration amplitude, frequency range, and duration specified for each case size. Amplitude The specimens shall be subjected to a simple harmonic motion having an amplitude of either.6-inch double amplitude (maximum total excursion) or peak level specified above (XXg peak), whichever is less. The tolerance on vibration amplitude shall be ± percent. Frequency Range The vibration frequency shall be varied logarithmically between the approximate limits of to 2, Hz. Sweep Time and Duration The entire frequency range of to 2, Hz and return to Hz shall be traversed in 2 minutes. This cycle shall be performed 2 times in each of three mutually perpendicular directions (total of 36 times), so that the motion shall be applied for a total period of approximately 2 hours. Interruptions are permitted provided the requirements for rate of change and test duration are met. High Reliability Test/Burn-in Established Reliability capacitors shall be subjected to a minimum of percent of the dc rated voltage at 85 ºC for 48 hours minimum but not to exceed 96 hours. During this test, capacitors shall be adequately protected against temporary voltage surges of percent or more of the test voltage. After burn-in, the capacitors shall be returned to room ambient conditions and the dc leakage, capacitance, and ESR shall be measured with respect to specified limits. Thermal Resistance Large Sides Heatsinked one both Case Length.5" 2." 3." Insulation ºC/W ºC/W ºC/W None Polyester None Polyester ESL Weight Terminals Ripple Current Capability Air Cooled Heatsink Cooled Example 3 nh measured /4 from case at MHz Case EK 43 g typical Case EA 76 g typical Case EB 92 g typical 8 AWG copper wire with 6/4 tin-lead electroplate, 2 amps max The ripple current capability is set by the maximum permissible internal core temperature, 25 ºC. The ripple currents in the ratings tables are for 85 ºC case temperatures. For air temperatures without a heatsink use the multipliers Ambient Temperature, No Heatsink. Temperature rise from the internal hottest spot, the core, to ambient air is T = I 2 (ESR)(θcc + θca) where θcc is the thermal resistance from core to case and θca from case to ambient. To calculate maximum ripple capability with the MLS attached to a heatsink use the maximum core temperature and the values for θcc. As an illustration, suppose you operate an insulated MLS332M6EBC in 65 ºC air and attach it to a commercial heatsink with a free-air thermal resistance of 2.7 ºC/W. Use a good thermal grease between the MLS and the heatsink, and the total thermal resistance is or 4.5 ºC/W. The power which would heat the core to 25 C is (25-65)/4.5 or 3.3 W. For an ESR of 3 mω, 3.3 W equates to a ripple current of 2.7 A, however, the wire leads are rated for only 2 A.
3 Part Numbering System HV HR MLS 82 M 2 EB A Optional Optional Type Capacitance Tolerance Rated Voltage Case Code Insulation Mounting Style High Vibration High Reliability MLS 82=82 µf 2 = µf Examples: Standard MLS: MLS82M2EBC High Reliability: HRMLS82M2EBC High Vibration: HVMLS82M2EBC High Reliability, High Vibration: HVHRMLS82M2EBC Outline Drawings M=±2% Vdc EK, L=.5 in. EA, L=2. in EB, L=3. in. * other sizes available = bare can = polyester A = mounting tabs C = two leads/no tabs D = hook leads/tabs * other mounting tab options available Note: The polyester tape wrap may add up to.2 inches to the thickness and width of the capacitor. Standard Type MLS Type HV, Rilled Construction Style A: Mounting Tabs Style C: No Tabs.88±. L ±.3.4 DIA, 8 AWG LEADS (TYP) ±..75± L ±.2.5 MIN L ±.2.5 MIN.36.3 Style D: Hook Leads.88±. L ±.3.56 ±. SLOT.56 Dia..75±..± ±. L ±.2.4 DIA, 8 AWG LEADS (TYP).26±..75 ±. DIA Case Length Weight Code L (in) (g) EK.5 43 EA EB Mounting tabs are welded to the case.
4 Ratings ESR max Ripple (A) ESR max Ripple (A) Cap 25 C (mω) 85 C Length Cap 25 C (mω) 85 C Length (µf) Catalog Part Number 2 Hz 2 khz 2 Hz 2 khz (inches) (µf) Catalog Part Number 2 Hz 2 khz 2 Hz 2 khz (inches) 25 C: 5 Vdc, 5 C: 7.5 Vdc, 25 C Surge: Vdc 2, MLS22M6EAC , MLS93M5REKC ,3 MLS332M6EBC , MLS283M5REAc C: 75 Vdc, 5 C: V, 25 C Surge: 25 Vdc 47, MLS473M5REBC , MLS2M75EKC C: 7.5 Vdc, 5 C: V, 25 C Surge: 3 Vdc,6 MLS62M75EAC , MLS73M7R5EKC ,7 MLS272M75EBC , MLS263M7R5EAc C: Vdc, 5 C: 5 V, 25 C Surge: 8 Vdc 43, MLS433M7R5EBC MLS5MEKC C: Vdc, 5 C: 6 V, 25 C Surge: 2 Vdc 77 MLS77MEAC , MLS33MEKC ,3 MLS32MEBC , MLS233MEAC C: 5 Vdc, 5 C: 2 V, 25 C Surge: 25 Vdc 38, MLS383MEBC MLS4M5EKC C: 2 Vdc, 5 C: 3 V, 25 C Surge: 4 Vdc] 6 MLS6M5EAC ,8 MLS682M2EKC , MLS2M5EBC , MLS3M2EAC C: 2 Vdc, 5 C: 25 Vdc, 25 C Surge: 3 Vdc 7, MLS73M2EBC MLS33M2EKC C: 4 Vdc, 5 C: 5 V, 25 C Surge: 63 Vdc 49 MLS49M2EAC ,4 MLS442M4EKC MLS82M2EBC ,6 MLS662M4EAC C: 25 Vdc, 5 C: 25 Vdc, 25 C Surge: 3 Vdc, MLS3M4EBC MLS22M25EKC C: 6 Vdc, 5 C: 8 V, 25 C Surge: Vdc 33 MLS33M25EAC ,5 MLS52M6EKC MLS56M25EBC Typical Performance Curves Type MLS Operating Life in Kilohours vs Ripple Current (9% V) Expected Operating Life, kh 45 ⁰C 55 ⁰C 65 ⁰C 75 ⁰C 85 ⁰C Rated Ripple-Current Multiple
5 Typical Performance Curves Ratio to 25 ºC, 2 Hz Value MLS Capacitance vs Temperature & Frequency, µf 75 V 2 µf 25 ºC 65 ºC 25 ºC ºC 2 ºC 97 µf 4 ºC 88µF 55 ºC Ratio ESR to 25 ºC, 2 Hz Value 5.3 MLS ESR vs Temperature and Frequency, µf, 75 V.33 Ω.47 Ω.28 Ω 55 ºC 4 ºC 2 ºC ºC 25 ºC 65 ºC 25 ºC 5 Frequency (Hz). Frequency (Hz) Ratio to 25 ºC, 2 Hz Value Capacitance vs Temperature & Frequency, 82 µf, 2 V 25 ºC ºC 85 ºC 65 ºC 45 ºC 2 ºC 4 ºC 25 ºC ºC.2 Frequency (Hz) 8 MLS3M5EBD Life Test at 25 C, 5 V Capacitance 9 8 Capacitance (µf) 6 4 ESR Test Hours
6 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the Information ) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ( Cornell Dubilier ) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
Type MLSH 125 C Hermetic Slimpack, Aluminum Electrolytic Capacitor
The world s only hermetically sealed aluminum electrolytic capacitor with glass-to-metal seal, type MLSH has extraordinary long life and rugged construction for the most demanding power electronics applications.
More informationType MLP 85 C Flatpack, Ultra Long Life, Aluminum Electrolytic Very Low Profile
The MLP s high-energy storage and box-shape make it perfect for voltage holdup or filtering in military SEM-E modules, telecom circuit packs and computer cards. The MLP delivers up to 20 joules of energy
More informationType THAS,ThinPack, Aluminum Electrolytic Capacitor, 105 ºC
High Energy Density, REACH and RoHS Compliant At 9 mm thin, type THAS Thinpack offers the highest energy density available in a low profile aluminum electrolytic. It s ideal for the lowest profile circuits
More informationType THA,ThinPack, Aluminum Electrolytic Capacitor, 85 ºC
High Energy Density, REACH and RoHS Compliant At 8.2 mm thin, type THA Thinpack offers the highest energy density available in a low profile aluminum electrolytic. It s ideal for the lowest profile circuits
More informationType MLP 85 C Flatpack, Ultra Long Life, Aluminum Electrolytic Very Low Profile
The MLP s high-energy storage and box-shape make it perfect for voltage holdup or filtering in military SEM-E modules, telecom circuit packs and computer cards. The MLP delivers up to 20 joules of energy
More informationType MLP, 85 C Flatpack, Ultra-Long Life, Aluminum
Type MLP 85 C Type MLP, 85 C Flatpack, Ultra-Long Life, 1/2-Inch Height, 50-Year Life The MLP s high-energy storage and box-shape make it perfect for voltage holdup or filtering in military SEM-E modules,
More informationType RA Radial PET Film Capacitors
The style capacitor is constructed in an efficient rugged selfencased size. The non-inductive multilayer metallized polyester film capacitor features a small size, high dv/dt capability, very low ESR at
More informationType 420C 85 C Long Life, Inverter Grade, Plug-in, Aluminum Best Value, High Ripple, Board-Mount Type
Specifications Type 420C is the PC-mount version of the Type 520C screw terminal, computer grade capacitor and the 85 C version of the Type 450C Inverter Grade capacitor. It delivers the ripple current
More informationType 160 Metallized Polyester Radial Lead Capacitors
Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors Specifcations Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric
More informationType 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion
Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation
More informationType 297, High-Voltage Mica Capacitors Corona-free Mica Coupling Capacitors for Medium-Voltage PDA s
Designed for Partial Discharge Analyzers (PDA s) monitoring rotating machinery or other medium-voltage equipment from 1 to 35 kvac RMS at power-line frequencies of 10 Hz to 1 khz, Mica Capacitor Type 297
More informationTypes MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications actual size Capacitance Range: Voltage Ratings: Temperature Range: Capacitance Tolerance: Dielectric Strength: Insulation
More informationTypes MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
More informationTypes MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged fexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
More informationType 725M, Orange Drop, Metallized Polypropylene Film Capacitors
Type 725M Orange Drop Metallized Polypropylene Film Capacitors Features Radial-lead Pressed profile, compact size Non-inductively wound Very low ESR/ESL Self-healing properties Specifications Capacitance
More informationType 418P, Orange Drop, Polyester Film/Foil Capacitors. Voltage Ratings: 100 to 1000 Volts DC
Type 418P Orange Drop Round Profile Polyester Film/Foil Capacitors Features Radial-lead. Round profile. Non-inductively wound, extended foil construction. Ratings up to 1000 Volts DC. Specifications Capacitance
More informationFEATURES ± [0.64 ± 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable
SuperTan Wet Tantalum Capacitors s capacitor represents a major breakthrough in wet tantalum technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates
More informationType EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options
Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low
More informationType 225P, Orange Drop, Polyester Film/Foil Capacitors
Features Radial-lead. Pressed profile. Non-inductively wound, extended foil construction. Over 35 years o f proven dependability. Wide availability through CDE Distribution. Specifications Capacitance
More informationTypes MCH and MCHN Multilayer High RF Power Capacitors
2500 & 4000 Volt RF Capacitors for Medical Imaging Coils, Plasma Generators, VHF/UHF Power Amplifiers and Antenna Tuning with Nonmagnetic Option The flexible aluminum silicate dielectric eliminates cracking
More informationType 715P, Orange Drop, Polypropylene Film/Foil Capacitors
Features Long history of proven reliability Low dissipation factor. Tolerances as close as ±1%. Excellent stability, virtually linear temperature coefficient. Various lead spacings, crimp styles and lead
More informationType 716P, Orange Drop, Polypropylene Film/Foil Capacitors
Features Copper leads. Extremely low dissipation factor. Superb high frequency response. Excellent stability, virtually linear temperature coefficient. Various lead spacings, crimp styles and lead lengths
More informationSuperTan Wet Tantalum Capacitors with Hermetic Seal
SuperTan Wet Tantalum Capacitors with Hermetic Seal represents a major breakthrough in wet tantalum capacitor technology. Its unique cathode system provides the highest capacitance per unit volume. The
More informationApplications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG127, +150 C Overview Applications KEMET's PEG127 is an electrolytic capacitor with an outstanding electrical performance. The device has a polarized all-welded
More informationApplications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG225, +125 C & +150 C Overview Applications KEMET's PEG225 is an electrolytic capacitor with an outstanding electrical performance. The device has a polarized all-welded
More informationApplications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG226, +150 C Overview Applications The KEMET PEG226 is an electrolytic capacitor with an outstanding electrical performance. The device has a polarized all-welded
More informationOverview. Benefits. Applications. Tantalum Through-Hole Capacitors Radial Dipped T363 & T369 MIL-PRF-49137/2 (CX02 & CX12 Style)
T363 & T369 MIL-PRF-49137/2 (CX02 & CX12 Style) Overview The KEMET T363 and T369 product is manufactured to the requiarements of MIL-PRF-49137, while maintaining all performance characteristics of the
More informationApplications. Capacitance Code Version. The last two digits represent significant figures. The first digit indicates the total number digits.
Axial Aluminum Electrolytic Capacitors PEG226, +150 C Overview Applications The KEMET PEG226 is an electrolytic capacitor with an outstanding electrical performance. The device has a polarized all-welded
More informationDesigned for mission critical applications requiring high power, filtering, hold-up and current pulse generation.
Tantalum Through-Hole Capacitors Hermetically Sealed Overview KEMET's M550 and M551 Modular Series are manufactured by placing T550 or T551 Polymer Hermetic Sealed Capacitors (PHS) in parallel. The T550
More informationPCB Mount Power Film Capacitors. Highlights - High capacitance - High ripple current - Self-healing. Specifcations. Dimensions
Typ e L Polypropylene oard Mount Link apacit ors Specifcations Type L series uses the most advanced metallized flm technology for long life and high reliability in Link applications. This series combines
More informationApplications. Capacitance Code (pf)
AC Line EMI Suppression and RC Networks PMZ2035 Series Metallized Impregnated Paper, Class X1, 440 VAC/1,000 VDC Overview Applications The PMZ2035 Series is constructed of multilayer metallized paper encapsulated
More informationAluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability 40 RTM lower Z longer life 50 RMI 25 C 46 RTI high vibration QUICK REFERENCE DATA DESCRIPTION VALUE Nominal
More informationMIL-STD-202G VIBRATION, HIGH FREQUENCY
VIBRATION, HIGH FREQUENCY 1. PURPOSE. The high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency ranges of 10 to 500 hertz
More informationApplications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
AC Line EMI Suppression and RC Networks P409 Series, Integrated Resistor, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The P409 Series is constructed of multilayer metallized paper
More informationApplications SS 30 V- R
AC Line Filters SS Coils, SS0V Type Overview The KEMET SS Coils, SS0V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
More informationApplications SS 26 V- R
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
More informationAluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current
Aluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current smaller 9 AHT-DIN 8 AHT lower dimensions higher ripple Fig. 25 C 38 AML QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case
More informationApplications SS 30 V- R
AC Line Filters SS Coils, SS0V Type Overview The KEMET SS Coils, SS0V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
More informationApplications SS 26 V- R
AC Line Filters SS Coils, SS2V Type Overview The KEMET SS Coils, SS2V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
More informationApplications SS 35 V
AC Line Filters Common Mode SS Coils, 5V/H Series Overview The KEMET SS Coils, SS5V/H Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
More informationApplications. Overview. Benefits. Part Number System. Axial Aluminum Electrolytic Capacitors PEG225 Series, +125ºC and +150ºC
Axial Aluminum Electrolytic Capacitors PEG225 Series, +125ºC and +150ºC Overview KEMET's PEG225 is an electrolytic capacitor with outstanding electrical performance. The device has a polarized all-welded
More informationSurface Mount Polyester (PET) Film Capacitor JSN, Unencapsulated Stacked Chip with Flat Terminations, VDC, for DC Link (Automotive Grade)
JSN, Unencapsulated Stacked Chip with Flat Terminations, 63 250 VDC, for DC Link (Automotive Grade) Overview JSN is a jumbo stacked, naked metallized polyester film capacitor with flat terminations, which
More informationOverview. Benefits. Applications. Turns and Impedance Characteristics. Core Material and Effective Frequency Range
EMI Cores ESD-SR Series Snap-on Cores for Round Cables Overview KEMET ESD-SR Series snap-on cores are designed for use on round cable and are available in a variety of sizes. EMI cores are part of a family
More informationAluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In FEATURES Useful life: 2000 h at +105 C, > 5000 h at +85 C Voltage range from 16 V to 100 V Polarized aluminum electrolytic
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 056/057 PSM-SI miniaturized 156 PUM-SI Fig. 1 high voltage 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in
More informationPolypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications Overview The R79 Series is constructed of metallized
More informationAluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar
Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar FEATURES Long useful life: 6000 h at +105 C Specified for 500 V, 50 C operation High ripple current capability High reliability
More informationApplications SSHB 21 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
More informationApplications SU 9 VD
AC Line Filters Common Mode SU Coils, 9VD Series, High Frequency Type Overview The KEMET SU coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with
More informationApplications SC JS. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type 0x- = x A. x0 = x mh xx = x.x mh 0x = 0.
AC Line Filters Common Mode SC Coils, SC-JS Series, Terminal Base Type Overview The KEMET SC-JS coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
More informationMotor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC. Applications C87 8 B F AA 4 J
C87 Series, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview Polypropylene metallized film with cylindrical aluminium can type filled with resin; faston, plastic deck or cable
More informationOverview. Benefits. Part Number System. Pin/Solder Tag/Audio Aluminum Electrolytic Capacitors ALN20S Series, +85 C
Pin/Solder Tag/Audio Aluminum Electrolytic Capacitors ALN20S Series, +85 C Overview KEMET's ALN20S series of capacitors is a new generation T-Network Capacitor (TNC). The TNC is manufactured by KEMET in
More informationApplications R74 5 F 1100 AA H0 J
Polypropylene Pulse/High Frequency Capacitors R74 125 C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 125 C is constructed of metallized polypropylene
More informationApplications PHZ9004 E F 7100 M R06L2
AC Line EMI Suppression and RC Networks PHZ9004 Series Metallized Polypropylene Film, 300 VAC 3x X2 with Separate Terminals for Three-Phase Filtering Overview The PHZ9004 Series is constructed of metallized
More informationApplications. Overview. Benefits. Part Number System. AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type
AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type Overview The KEMET SSRH24NV/NH coils are common mode chokes with a wide variety of characteristics. These gear type coils are
More informationAluminum Capacitors Radial Miniature Semi-Professional MARKING
Aluminum Capacitors 047 RMS Fig.1 Component outline. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( D L in mm) 10 12 to 18 35 Rated capacitance range, C R 100 to 10000 μf Tolerance on C R
More informationApplications SSHB 10 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 10HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
More informationApplications SSR 21N VS Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NVS/NHS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
More informationOverview. Benefits. Applications. Tantalum Polymer Hermetic Sealed/Axial Through-Hole Capacitors T550 Polymer Hermetic Seal (PHS) Series
Overview The KEMET is a tantalum capacitor with a Ta anode and Ta 2 O 5 dielectric. A conductive organic polymer replaces the traditionally used MnO 2 or wet electrolyte as the cathode plate of the capacitor.
More informationWirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount
Wirewound Resistors, Military, MIL-PRF-18546 Qualified, Type RE, Aluminum Housed, Chassis Mount STANDARD ELECTRICAL SPECIFICATIONS MILITARY VISHAY REFERENCE POWER RATING P 25 C W FEATURES Molded construction
More informationAluminum Electrolytic Capacitors Radial Low Profile, 5 mm
Aluminum Electrolytic Capacitors Radial Low Profile, 5 mm 038 RSU 097 RLP 7 higher CV-values 5 mm ig. 1 longer life SMD 153 CRV QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm)
More informationApplications SC JH. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type x0- = x0 A xx- = xx A. x0 = x mh xx = x.
AC Line Filters Common Mode SC Coils, SC-JH Series, Terminal Base Type Overview The KEMET SC-JH coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
More informationApplications. significant figures. Third digit specifies number of zeros.
Snap-In Aluminum Electrolytic Capacitors ALA8D, +105 C Overview Applications The KEMET ALA Snap-In Capacitors are designed for automotive applications. They can withstand vibration up to 20 G in accordance
More information8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
More informationApplications SSR 10 V Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 10VS/HS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
More informationApplications SS 30 V- R
AC Line Filters Common Mode SS Coils, 0V Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
More informationApplications SU 16 VD
AC Line Filters SU Coils, SU 1VD High Frequency Type Overview The KEMET SU Coils, SU 1VD High Frequency Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer
More informationApplications SU 10 VFC- R
AC Line Filters SU Coils, SU VFC-R Type Overview The KEMET SU Coils, SU VFC-R Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode
More informationC 062 C 105 K 1 R 5 T A Rated Voltage (VDC) 5 = 50 1 = = 200
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, X7R Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in X7R dielectric feature
More informationS C A 69 B 104 J W S. Capacitance Code (pf)
SCA Series, Axial, C 3 Technology, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s SCA Series axial through-hole ceramic capacitors in C0G dielectric feature proprietary Ceramic Cased Capacitor
More informationApplications. Overview. Benefits. Ordering Information. Pulse Transformers Device for HD-PLC, PLT Series
Pulse Transformers Device for HD-PLC, PLT Series Overview The KEMET PLT pulse transformers are common mode choke coils suitable for Power Line Communication (PLC). Designed with our proprietary ferrite
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationTantalum Through-Hole Capacitors Hermetically Sealed T216 Series Axial MIL PRF (CSS13 Style) and T256 (CSS33 Style) Applications
T216 Series Axial MIL PRF 39003 (SS13 Style) and T256 (SS33 Style) Overview Applications The T216 and T256 are KEMET's designation for MIL Style SS13 and SS33 capacitors. The T216/T256 Series is qualified
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
More informationApplications SS 11 VL- R
AC Line Filters Common Mode SS Coils, VL Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
More informationMetallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?999
More informationApplications SSR 21N V-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NV-M/NH-M, High Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with
More informationUltra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
More informationMPLCH 0740 L 1R0. Series Size Code Inductor Inductance Code µh MPLCH
Overview The KEMET MPLCH metal composite inductors are ideal for use in DC to DC switching power supplies. The combination of composite core material and round wire allow these inductors to provide high
More informationApplications SSRH 7 HS-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSRH Coils, 7HS-M, Wide Range Impedance Type Overview The KEMET SSRH7H-M coils are common mode chokes with a wide variety of characteristics. These low current and high inductance,
More informationMetallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991
More informationApplications SC JH
AC Line Filters SC Coils, SC-JH Terminal Base Type Overview The KEMET SC Coils, SC-JH Terminal Base Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer
More informationOverview. Applications. Benefits SPICE. Tantalum Polymer Hermetic Sealed/Axial Through-Hole Capacitors T550 Polymer Hermetic Seal (PHS) Series
Overview The KEMET is a tantalum capacitor with a Ta anode and Ta 2 O 5 dielectric. A conductive organic polymer replaces the traditionally used MnO 2 or wet electrolyte as the cathode plate of the capacitor.
More informationApplications SCF Type Dimension Code (See Table 1) Rated Current (A) Minimum Inductance (mh)
AC Line Filters SC Coils, SCF Compact, High-inductance Type Overview The KEMET SC Coils, SCF Compact, High-inductance Type AC line filters are offered in a wide variety of sizes and specifications. Applications
More informationAluminum Capacitors Radial Miniature Long Life
048 RML Aluminum Capacitors FEATURES Fig.1 Component outline. 151 152 RLH RMH Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief,
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
More informationApplications ESD- FPD Series Form Type Applicable Cable Clamp Type
EMI Cores ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables for High Frequency (Bare) Overview The KEMET ESD-FPD-1 Series split cores are designed for use on flat cables. A wide range of
More information4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
More informationBulk Metal Foil Technology Hermetically Sealed Power and Current Sensing Resistor with TCR of 2 ppm/ C and Power up to 10 Watts
Bulk Metal Foil Technology Hermetically Sealed Power and Current Sensing Resistor with TCR of 2 ppm/ C and Power up to 10 Watts Any value available within resistance range Vishay Bulk Metal Foil power
More information5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
More informationApplications TPI L 180 N. Series Size Code Inductor Inductance Code nh Core Material TPI
Overview The KEMET TPI ferrite core inductors are designed for a very low core loss and its flat wire 1 turn through the construction design enables very high efficiency at large currents. The core material
More informationEMI Cores ESD-R-B Toroidal Cores for Round Cables for Low & High Frequency (with snail-shaped case) Applications
EMI Cores ESD-R-B Toroidal Cores for Round Cables for Low & High Frequency (with snail-shaped case) Overview The KEMET ESD-R-B series solid toroidal cores are designed to use on round cables. The wide
More informationPhotovoltaic Solar Cell Protection Schottky Rectifier
VSB545-M3 Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.33 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency
More informationOverview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series
T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series Overview The KEMET T550 Series Polymer Hermetic Seal (PHS) is a tantalum capacitor with a Ta anode and Ta 2 O 5 dielectric. A conductive organic
More informationGlass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
More informationNGM Snubber Capacitors
NGM Snubber Capacitors Snubber Capacitors of Metalized Polypropylene Film With Internal Series Connection Features Very High Pulse Strength High Current Highest possible contact reliability RoHS-compatible
More informationApplications SS 26 V- R
AC Line Filters Common Mode SS Coils, 2V Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
More informationApplications SS 30 V- R
AC Line Filters SS Coils, SS0V Type Overview The KEMET SS Coils, SS0V Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode choke
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
More information