CAT853, CAT859, CAT863, CAT869 3-Pin Microprocessor Power Supply Supervisors
|
|
|
- Andrea Spencer
- 6 years ago
- Views:
Transcription
1 CAT853, CAT859, CAT863, CAT869 3-Pin Microprocessor Power Supply Supervisors Description The CAT853, CAT863, CAT859, and CAT869 are supervisory circuits that monitor power supplies in digital systems. These devices generate a reset signal, which is asserted while the power supply voltage is below a preset threshold level and for at least 14 ms after the power supply level has risen above that level. Industry standard threshold levels are offered to support +3.3 V or 5. V systems. The CAT859 and CAT869 feature a push pull output (active low) for the two pinout options. The CAT853 and CAT863 feature an open drain output (active low). Both require a pull up resistor on the output. Fast transients on the power supply are ignored and the output is guaranteed to be in the correct state at levels as low as 1. V. Features Precision Monitoring of +3.3 V ( 5%, 1%), 5 V ( 1% Power Supplies) Active Low Reset Output Reset Valid down to = 1. V 6 A Power Supply Current Power Supply Transient Immunity Industrial Temperature Range: 4 C to +85 C SOT 3 Package These Devices are Pb Free and are RoHS Compliant Applications Computers, Servers, Laptops and Cable Modems Wireless Communications Embedded Control Systems White Goods Power Meters Intelligent Instruments PDAs and Handheld Equipment Table 1. THRESHOLD SUFFIX SELECTOR Nominal Threshold Voltage Threshold Suffix Designation 4.63 V L 4.38 V M 4. V F 4. V J 3.8 V T.93 V S.63 V R.4 V C.3 V Z PIN CONFIGURATION XXX M SOT 3 TB SUFFIX CASE 57AG CAT853, CAT (Top Views) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. 3 CAT863, CAT869 1 XXXM 3 MARKING DIAGRAM = Specific Device Code = Date Code = Pb Free Package (*Note: Microdot may be in either location) Semiconductor Components Industries, LLC, 1 May, 1 Rev. 1 1 Publication Order Number: CAT853/D
2 Table. PIN DESCRIPTION Pin Name Function Active low reset. is asserted if falls below the reset threshold and remains low for at least 14 ms after rises above the reset threshold Ground Power supply voltage that is monitored TOLERANCE BIAS + DIGITAL DELAY VOLTAGE REFERENCE CAT853 CAT863 TOLERANCE BIAS + DIGITAL DELAY VOLTAGE REFERENCE CAT859 CAT869 Figure 1. Block Diagrams Table 3. ABSOLUTE MAXIMUM RATINGS Parameters Ratings Units Any pin with respect to ground.3 to +6. V Input Current, ma Output Current, ma Rate of Rise, 1 V/ s Continuous Power Dissipation Derate 4 mw/ C above 7 C (SOT3) 3 mw Operating Temperature Range 4 to +85 C Storage Temperature Range 65 to +15 C Lead Soldering Temperature (1 sec) 3 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
3 Table 4. ELECTRICAL CHARACTERISTICS ( = Full range, T A = 4 C to +85 C unless otherwise noted. Typical values at T A = +5 C and = 3.3 V for the C, S, T versions, = 5 V for the M version.) Symbol Parameter Conditions Min Typ (Note 1) Max Units Range T A = C to +7 C V T A = 4 C to +85 C I CC Supply Current T A = 4 C to +85 C < 3.6 V, C, S, T 6 15 A V TH Reset Threshold Voltage Reset Threshold Tempco L Threshold T A = +5 C V T A = 4 C to +85 C M Threshold T A = +5 C T A = 4 C to +85 C F Threshold T A = +5 C T A = 4 C to +85 C J Threshold T A = +5 C T A = 4 C to +85 C T Threshold T A = +5 C T A = 4 C to +85 C S Threshold T A = +5 C T A = 4 C to +85 C R Threshold T A = +5 C T A = 4 C to +85 C.55.7 C Threshold T A = +5 C T A = 4 C to +85 C.3.5 Z Threshold T A = +5 C T A = 4 C to +85 C ppm/ C to Reset Delay = V TH to (V TH 1 mv) s Reset Active Timeout Period T A = 4 C to +85 C ms V OL V OH Output Voltage Low Output Voltage High = V TH min, I SINK = 1. ma.4 V > 1. V, I SINK = 5 A.3 = V TH max, I SOURCE = 5 A (for CAT859/869 only) 1. Production testing done at T A = +5 C; limits over temperature guaranteed by design only..8 V 3
4 TYPICAL ELECTRICAL OPERATING CHARACTERISTICS ( = Full range, T A = 4 C to +85 C unless otherwise noted. Typical values at T A = +5 C and = 3.3 V for the C, S, T versions, = 5 V for the M version.) 6 1 POWER UP TIMEOUT (ms) = 5 V =.5 V SUPPLY CURRENT ( A) = 5.5 V 5 = 3.6 V 1 15 TEMPERATURE ( C) TEMPERATURE ( C) Figure. Power Up Reset Timeout vs. Temperature Figure 3. Supply Current vs. Temperature (No Load) POWER DOWN DELAY ( s) NORMALIZED THRESHOLD TEMPERATURE ( C) TEMPERATURE ( C) Figure 4. Power Down Reset Delay vs. Temperature Figure 5. Normalized Reset Threshold vs. Temperature 4
5 DETAILED DESCRIPTION Reset Timing The reset signal is asserted low for the CAT853, CAT863, CAT859, and CAT869 when the power supply voltage falls below the threshold trip voltage and remains asserted for at least 14 ms after the power supply voltage has risen above the threshold. Power Supply Voltage 5 V V Threshold Voltage Reset Timeout Period 5 V V 14 ms minimum Figure 6. Reset Timing Diagram Transient Response The CAT853, CAT863, CAT859, and CAT869 protect Ps against brownout failure. Short duration transients of 4 s or less and 1 mv amplitude typically do not cause a false. Figure 7 shows the maximum pulse duration of negative going transients that do not cause a reset condition. As the amplitude of the transient goes further below the threshold (increasing V TH ), the maximum pulse duration decreases. In this test, the starts from an initial voltage of.5 V above the threshold and drops below it by the amplitude of the overdrive voltage (V TH ). TRANSIENT DURATION (s) M THRESHOLD C THRESHOLD T AMB = 5 C Valid Reset with under 1. V To ensure that the CAT859 and CAT869 pin is in a known state when is under 1. V, a > 1 k pull down resistor between pin and is recommended. Power Supply CAT8x9 Figure 8. Valid with Under 1. V 1 k OVERDRIVE V TH (mv) 1 Figure 7. Maximum Transient Duration Without Causing a Reset Pulse vs. Reset Comparator Overdrive 5
6 Bi directional Reset Pin Interfacing The CAT859 and CAT869 can interface with P/ C bi directional reset pins by connecting a 4.7 k resistor in series with the CAT859 and CAT869 reset output and the P/ C bi directional reset pin. Power Supply BUF Buffered CAT8x9 4.7 k INPUT P (For example: 68HC11) Bi directional I/O Pin Figure 9. Bi directional Reset Pin Interfacing CAT853 and CAT863 Open Drain Application The CAT853 and CAT863 features an open drain output and therefore need a pull up resistor on the output for proper operation, as shown on Figure 1. An advantage of the open drain output includes the ability to wire AND several outputs together to form an inexpensive logic circuit. It is also possible to have the pull up resistor connected to a different supply which can be higher than the CAT8x3 pin. The value of the pull up resistor is not critical in most applications, typical values being between 5 k and 1 k. Power Supply 5 k CAT8x3 P INPUT Figure 1. Typical CAT8x3 Open Drain Circuit Configuration 6
7 PACKAGE DIMENSIONS SOT 3, 3 Lead CASE 57AG 1 ISSUE O D SYMBOL MIN NOM MAX A A1 b c E1 E D E E e e1 TOP VIEW e e1 L L1 θ.95 BSC 1.9 BSC.4 REF.54 REF º 8º A b A1 L1 L c SIDE VIEW END VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. () Complies with JEDEC TO-36. 7
8 ORDERING INFORMATION Order Number Top Mark (Note ) NiPdAu Matte Tin Voltage NiPdAu Matte Tin CAT853LTBI GT3 CAT853LTBI T V VPA VPR CAT853MTBI GT3 CAT853MTBI T V VPA VPR CAT853FTBI GT3 CAT853FTBI T3 4. V VPA VPR CAT853JTBI GT3 CAT853JTBI T3 4. V VPA VPR CAT853TTBI GT3 CAT853TTBI T3 3.8 V VPA VPR CAT853STBI GT3 CAT853STBI T3.93 V VPA VPR CAT853RTBI GT3 CAT853RTBI T3.63 V VPA VPR CAT853CTBI GT3 CAT853CTBI T3.4 V VPA VPR CAT853ZTBI GT3 CAT853ZTBI T3.3 V VPA VPR Reset Package Quantity per Reel (Note 3) LOW SOT 3 3 3, CAT859LTBI GT3 CAT859LTBI T V VNA VNR CAT859MTBI GT3 CAT859MTBI T V VNA VNR CAT859FTBI GT3 CAT859FTBI T3 4. V VNA VNR CAT859JTBI GT3 CAT859JTBI T3 4. V VNA VNR CAT859TTBI GT3 CAT859TTBI T3 3.8 V VNA VNR CAT859STBI GT3 CAT859STBI T3.93 V VNA VNR CAT859RTBI GT3 CAT859RTBI T3.63 V VNA VNR CAT859CTBI GT3 CAT859CTBI T3.4 V VNA VNR CAT859ZTBI GT3 CAT859ZTBI T3.3 V VNA VNR LOW SOT 3 3 3, CAT863LTBI GT3 CAT863LTBI T V VNB VNK CAT863MTBI GT3 CAT863MTBI T V VNB VNK CAT863FTBI GT3 CAT863FTBI T3 4. V VNB VNK CAT863JTBI GT3 CAT863JTBI T3 4. V VNB VNK CAT863TTBI GT3 CAT863TTBI T3 3.8 V VNB VNK CAT863STBI GT3 CAT863STBI T3.93 V VNB VNK CAT863RTBI GT3 CAT863RTBI T3.63 V VNB VNK CAT863CTBI GT3 CAT863CTBI T3.4 V VNB VNK CAT863ZTBI GT3 CAT863ZTBI T3.3 V VNB VNK LOW SOT 3 3 3, CAT869LTBI GT3 CAT869LTBI T V VNC VNJ CAT869MTBI GT3 CAT869MTBI T V VNC VNJ CAT869FTBI GT3 CAT869FTBI T3 4. V VNC VNJ CAT869JTBI GT3 CAT869JTBI T3 4. V VNC VNJ CAT869TTBI GT3 CAT869TTBI T3 3.8 V VNC VNJ CAT869STBI GT3 CAT869STBI T3.93 V VNC VNJ CAT869RTBI GT3 CAT869RTBI T3.63 V VNC VNJ CAT869CTBI GT3 CAT869CTBI T3.4 V VNC VNJ CAT869ZTBI GT3 CAT869ZTBI T3.3 V VNC VNJ LOW SOT 3 3 3,. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents. 3. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD811/D. 4. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device Nomenclature document, TND31/D, available at 8
9 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 817 USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: Japan Customer Focus Center Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative CAT853/D
CAX803, CAX809, CAX Pin Microprocessor Power Supply Supervisors
3-Pin Microprocessor Power Supply Supervisors Description The CAX83, CAX89, and CAX81 are supervisory circuits that monitor power supplies in digital systems. The CAX83, CAX89, and CAX81 are direct replacements
3-Pin Microprocessor Power Supply Supervisors
3-Pin Microprocessor Power Supply Supervisors Features Precision monitoring of +5.0V (-5%, -10%, -20%), +3.3V (-5%, -10%), +3.0V (-10%) and +2.5V (-5%) power supplies Offered in three output configurations:
CAT884. Quad Voltage Supervisor
Quad Voltage Supervisor Description The is a fourchannel power supply supervisory circuit with high accuracy reset thresholds and very low power consumption. The device features an activelow opendrain
4-Pin Microprocessor Power Supply Supervisors with Manual Reset
4-Pin Microprocessor Power Supply Supervisors with Manual Reset, CAT812 FEATURES Precision monitoring of +5.0 V (± 5%, ± 10%, ± 20%), +3.3 V (± 5%, ± 10%), +3.0 V (± 10%) and +2.5 V (± 5%) power supplies
CAT5126. One time Digital 32 tap Potentiometer (POT)
One time Digital 32 tap Potentiometer (POT) Description The CAT5126 is a digital POT. The wiper position is controlled with a simple 2-wire digital interface. This digital potentiometer is unique in that
ASM1816. Low Power, 3.3 V/3.0 V, P Reset, Active LOW, Open-Drain Output
Low Power, 3.3 V/3.0 V, P Reset, Active LOW, Open-Drain Output Description The ASM1816 is a voltage supervisory device with low power, 3.3 V/3 V P Reset, active LOW, open drain output. Maximum supply current
ASM1232LP/LPS 5V μp Power Supply Monitor and Reset Circuit
5V μp Power Supply Monitor and Reset Circuit General Description The ASM1232LP/LPS is a fully integrated microprocessor Supervisor. It can halt and restart a hung-up microprocessor, restart a microprocessor
CMPWR ma SmartOR Regulator with V AUX Switch
50 ma SmartOR Regulator with Switch Product Description The ON Semiconductor s SmartOR is a low dropout regulator that delivers up to 50 ma of load current at a fixed 3.3 V output. An internal threshold
P2I2305NZ. 3.3V 1:5 Clock Buffer
3.3V :5 Clock Buffer Functional Description P2I2305NZ is a low cost high speed buffer designed to accept one clock input and distribute up to five clocks in mobile PC systems and desktop PC systems. The
NTA4001N, NVA4001N. Small Signal MOSFET. 20 V, 238 ma, Single, N Channel, Gate ESD Protection, SC 75
Small Signal MOSFET V, 8 ma, Single, N Channel, Gate ESD Protection, SC 75 Features Low Gate Charge for Fast Switching Small.6 x.6 mm Footprint ESD Protected Gate AEC Q Qualified and PPAP Capable NVA4N
NTNUS3171PZ. Small Signal MOSFET. 20 V, 200 ma, Single P Channel, 1.0 x 0.6 mm SOT 1123 Package
NTNUS7PZ Small Signal MOSFET V, ma, Single P Channel,. x.6 mm SOT Package Features Single P Channel MOSFET Offers a Low R DS(on) Solution in the Ultra Small. x.6 mm Package. V Gate Voltage Rating Ultra
PZTA92T1. High Voltage Transistor. PNP Silicon SOT 223 PACKAGE PNP SILICON HIGH VOLTAGE TRANSISTOR SURFACE MOUNT
High Voltage Transistor PNP Silicon Features These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS (T C = 25 C unless otherwise noted) Rating Symbol Value Unit Collector-Emitter
MUN5311DW1T1G Series.
MUNDWTG Series Preferred Devices Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The Bias Resistor Transistor (BRT) contains a single
MMSD301T1G SMMSD301T1G, MMSD701T1G SMMSD701T1G, SOD-123 Schottky Barrier Diodes
MMSD3TG, SMMSD3TG, MMSD7TG, SMMSD7TG, SOD-3 Schottky Barrier Diodes The MMSD3T, and MMSD7T devices are spinoffs of our popular MMBD3LT, and MMBD7LT SOT3 devices. They are designed for highefficiency UHF
NTS4172NT1G. Power MOSFET. 30 V, 1.7 A, Single N Channel, SC 70. Low On Resistance Low Gate Threshold Voltage Halide Free This is a Pb Free Device
Power MOSFET V,.7 A, Single N Channel, SC 7 Features Low On Resistance Low Gate Threshold Voltage Halide Free This is a Pb Free Device V (BR)DSS R DS(on) MAX I D MAX Applications Low Side Load Switch DC
MUN5216DW1, NSBC143TDXV6. Dual NPN Bias Resistor Transistors R1 = 4.7 k, R2 = k. NPN Transistors with Monolithic Bias Resistor Network
MUN526DW, NSBC43TDXV6 Dual NPN Bias Resistor Transistors R = 4.7 k, R2 = k NPN Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single device
NTJS4405N, NVJS4405N. Small Signal MOSFET. 25 V, 1.2 A, Single, N Channel, SC 88
NTJSN, NVJSN Small Signal MOSFET V,. A, Single, N Channel, SC 88 Features Advance Planar Technology for Fast Switching, Low R DS(on) Higher Efficiency Extending Battery Life AEC Q Qualified and PPAP Capable
NTJD1155LT1G. Power MOSFET. 8 V, 1.3 A, High Side Load Switch with Level Shift, P Channel SC 88
NTJDL Power MOSFET V,.3 A, High Side Load Switch with Level Shift, P Channel SC The NTJDL integrates a P and N Channel MOSFET in a single package. This device is particularly suited for portable electronic
PIN CONNECTIONS MAXIMUM RATINGS (T J = 25 C unless otherwise noted) SC 75 (3 Leads) Parameter Symbol Value Unit Drain to Source Voltage V DSS 30 V
NTA7N, NVTA7N Small Signal MOSFET V, 4 ma, Single, N Channel, Gate ESD Protection, SC 7 Features Low Gate Charge for Fast Switching Small.6 x.6 mm Footprint ESD Protected Gate NV Prefix for Automotive
PCS2P2309/D. 3.3V 1:9 Clock Buffer. Functional Description. Features. Block Diagram
3.3V 1:9 Clock Buffer Features One-Input to Nine-Output Buffer/Driver Buffers all frequencies from DC to 133.33MHz Low power consumption for mobile applications Less than 32mA at 66.6MHz with unloaded
MMBFU310LT1G. JFET Transistor. N Channel. These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant. Features.
MMBFULT1G JFET Transistor N Channel Features These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant 2 SOURCE MAXIMUM RATINGS Rating Symbol Value Unit Drain Source Voltage V DS 25 Vdc Gate
NVLJD4007NZTBG. Small Signal MOSFET. 30 V, 245 ma, Dual, N Channel, Gate ESD Protection, 2x2 WDFN Package
NVLJD7NZ Small Signal MOSFET V, 2 ma, Dual, N Channel, Gate ESD Protection, 2x2 WDFN Package Features Optimized Layout for Excellent High Speed Signal Integrity Low Gate Charge for Fast Switching Small
NTNS3164NZT5G. Small Signal MOSFET. 20 V, 361 ma, Single N Channel, SOT 883 (XDFN3) 1.0 x 0.6 x 0.4 mm Package
NTNS36NZ Small Signal MOSFET V, 36 ma, Single N Channel, SOT 883 (XDFN3). x.6 x. mm Package Features Single N Channel MOSFET Ultra Low Profile SOT 883 (XDFN3). x.6 x. mm for Extremely Thin Environments
MMUN2211LT1 Series. NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network
MMUNLT Series Preferred Devices Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single
PCS2I2309NZ. 3.3 V 1:9 Clock Buffer
. V 1:9 Clock Buffer Functional Description PCS2I209NZ is a low cost high speed buffer designed to accept one clock input and distribute up to nine clocks in mobile PC systems and desktop PC systems. The
MMSZ5221BT1 Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZ5BT Series Preferred Device Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
NSBC114EDP6T5G Series. Dual Digital Transistors (BRT) NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
Preferred Devices Dual Digital Transistors (BRT) NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device
NTK3139P. Power MOSFET. 20 V, 780 ma, Single P Channel with ESD Protection, SOT 723
NTK9P Power MOSFET V, 78 ma, Single P Channel with ESD Protection, SOT 7 Features P channel Switch with Low R DS(on) % Smaller Footprint and 8% Thinner than SC 89 Low Threshold Levels Allowing.5 V R DS(on)
NTS4173PT1G. Power MOSFET. 30 V, 1.3 A, Single P Channel, SC 70
NTS17P Power MOSFET V, 1. A, Single P Channel, SC 7 Features V BV ds, Low R DS(on) in SC 7 Package Low Threshold Voltage Fast Switching Speed This is a Halide Free Device This is a Pb Free Device Applications
Distributed by: www.jameco.com 1-800-831-44 The content and copyrights of the attached material are the property of its owner. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The
MMBTA06W, SMMBTA06W, Driver Transistor. NPN Silicon. Moisture Sensitivity Level: 1 ESD Rating: Human Body Model 4 kv ESD Rating: Machine Model 400 V
Driver Transistor NPN Silicon Moisture Sensitivity Level: 1 ESD Rating: Human Body Model 4 kv ESD Rating: Machine Model 400 V Features S Prefix for Automotive and Other Applications Requiring Unique Site
NSQA6V8AW5T2 Series Transient Voltage Suppressor
Transient Voltage Suppressor ESD Protection Diode with Low Clamping Voltage This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection.
MMUN2111LT1 Series. Bias Resistor Transistors. PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
MMUNLT Series Preferred Devices Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single
MUN5211T1 Series. NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network NPN SILICON BIAS RESISTOR TRANSISTORS
MUNT Series Preferred Devices Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single
EMF5XV6T5G. Power Management, Dual Transistors. NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
Preferred Devices Power Management, Dual Transistors NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network Features Simplifies Circuit Design Reduces Board Space Reduces Component
NCP304A. Voltage Detector Series
Voltage Detector Series The NCP0A is a second generation ultralow current voltage detector. This device is specifically designed for use as a reset controller in portable microprocessor based systems where
MUN5332DW1, NSBC143EPDXV6, NSBC143EPDP6. Complementary Bias Resistor Transistors R1 = 4.7 k, R2 = 4.7 k
MUN5DW, NSBCEPDXV6, NSBCEPDP6 Complementary Bias Resistor Transistors R =.7 k, R =.7 k NPN and PNP Transistors with Monolithic Bias Resistor Network () PIN CONNECTIONS () () This series of digital transistors
NTTFS5116PLTWG. Power MOSFET 60 V, 20 A, 52 m. Low R DS(on) Fast Switching These Devices are Pb Free and are RoHS Compliant
Power MOSFET 6 V, 2 A, 52 m Features Low R DS(on) Fast Switching These Devices are Pb Free and are RoHS Compliant Applications Load Switches DC Motor Control DC DC Conversion MAXIMUM RATINGS ( unless otherwise
NSVEMD4DXV6T5G. Dual Bias Resistor Transistors. NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias
NTTFS5820NLTWG. Power MOSFET. 60 V, 37 A, 11.5 m. Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free and are RoHS Compliant
NTTFS582NL Power MOSFET 6 V, 37 A,.5 m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated) Parameter
BAT54CLT3G SBAT54CLT1G. Dual Common Cathode Schottky Barrier Diodes 30 VOLT DUAL COMMON CATHODE SCHOTTKY BARRIER DIODES
BAT54CLTG, SBAT54CLTG Dual Common Cathode Schottky Barrier Diodes These Schottky barrier diodes are designed for high speed switching applications, circuit protection, and voltage clamping. Extremely low
Low Capacitance Transient Voltage Suppressors / ESD Protectors CM QG/D. Features
Low Capacitance Transient Voltage Suppressors / ESD Protectors CM1250-04QG Features Low I/O capacitance at 5pF at 0V In-system ESD protection to ±8kV contact discharge, per the IEC 61000-4-2 international
P3P85R01A. 3.3V, 75 MHz to 200 MHz LVCMOS TIMING SAFE Peak EMI Reduction Device
3.3V, 75 MHz to 200 MHz LVCMOS TIMING SAFE Peak EMI Reduction Device Functional Description P3P85R0A is a versatile, 3.3 V, LVCMOS, wide frequency range, TIMING SAFE Peak EMI reduction device. TIMING SAFE
MBD110DWT1G MBD330DWT1G. Dual Schottky Barrier Diodes
, Dual Schottky Barrier Diodes Application circuit designs are moving toward the consolidation of device count and into smaller packages. The new SOT363 package is a solution which simplifies circuit design,
MMBZxxVAWT1G Series, SZMMBZxxVAWT1G Series. 40 Watt Peak Power Zener Transient Voltage Suppressors. SC 70 Dual Common Anode Zeners for ESD Protection
MMBZxxVAWTG Series, SZMMBZxxVAWTG Series 4 Watt Peak Power Zener Transient Voltage Suppressors SC 7 Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for
MMBZ15VDLT3G MMBZ27VCLT1G. 40 Watt Peak Power Zener Transient Voltage Suppressors. SOT-23 Dual Common Cathode Zeners for ESD Protection
MMBZ5VDLT, MMBZ7VCLT Preferred s 40 Watt Peak Power Zener Transient Voltage Suppressors SOT- Dual Common Cathode Zeners for ESD Protection These dual monolithic silicon zener diodes are designed for applications
NTGD4167C. Power MOSFET Complementary, 30 V, +2.9/ 2.2 A, TSOP 6 Dual
Power MOSFET Complementary, 3 V, +.9/. A, TSOP 6 Dual Features Complementary N Channel and P Channel MOSFET Small Size (3 x 3 mm) Dual TSOP 6 Package Leading Edge Trench Technology for Low On Resistance
NTGS3441BT1G. Power MOSFET. -20 V, -3.5 A, Single P-Channel, TSOP-6. Low R DS(on) in TSOP-6 Package 2.5 V Gate Rating This is a Pb-Free Device
Power MOSFET - V, -. A, Single P-Channel, TSOP- Features Low R DS(on) in TSOP- Package. V Gate Rating This is a Pb-Free Device Applications Battery Switch and Load Management Applications in Portable Equipment
MMSZxxxET1 Series, SZMMSZxxxET1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxET Series, SZMMSZxxxETG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
NTK3043N. Power MOSFET. 20 V, 285 ma, N Channel with ESD Protection, SOT 723
NTKN Power MOSFET V, 8 ma, N Channel with ESD Protection, SOT 7 Features Enables High Density PCB Manufacturing % Smaller Footprint than SC 89 and 8% Thinner than SC 89 Low Voltage Drive Makes this Device
NCP803. Very Low Supply Current 3 Pin Microprocessor Reset Monitor
ery Low Supply Current Pin Microprocessor Reset Monitor The NCP8 is a costeffective system supervisor circuit designed to monitor in digital systems and provide a reset signal to the host processor when
UMC2NT1, UMC3NT1, UMC5NT1
UMCNT, UMC3NT, UMC5NT Preferred Devices Dual Common BaseCollector Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The Bias Resistor Transistor
MUN5211DW1T1 Series. NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
MUNDWT Series Preferred Devices Dual Bias Resistor Transistors NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor
MMBZ5V6ALT1 Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors. SOT 23 Dual Common Anode Zeners for ESD Protection
4 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed for applications requiring transient overvoltage
NTR4502P, NVTR4502P. Power MOSFET. 30 V, 1.95 A, Single, P Channel, SOT 23
NTRP, NVTRP Power MOSFET V,.9 A, Single, P Channel, SOT Features Leading Planar Technology for Low Gate Charge / Fast Switching Low R DS(ON) for Low Conduction Losses SOT Surface Mount for Small Footprint
PCS3P8103A General Purpose Peak EMI Reduction IC
General Purpose Peak EMI Reduction IC Features Generates a 4x low EMI spread spectrum clock Input Frequency: 16.667MHz Output Frequency: 66.66MHz Tri-level frequency Deviation Selection: Down Spread, Center
NTS2101P. Power MOSFET. 8.0 V, 1.4 A, Single P Channel, SC 70
NTS11P Power MOSFET 8. V, 1.4 A, Single P Channel, SC 7 Features Leading Trench Technology for Low R DS(on) Extending Battery Life 1.8 V Rated for Low Voltage Gate Drive SC 7 Surface Mount for Small Footprint
NTMS5835NL. Power MOSFET 40 V, 12 A, 10 m
Power MOSFET V, 2 A, m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated) Parameter
MMQA Quad Common Anode Series. SC-74 Quad Monolithic Common Anode. Transient Voltage Suppressors for ESD Protection
MMQA Quad Common Anode Series Preferred Devices SC-74 Quad Monolithic Common Anode Transient Voltage Suppressors for ESD Protection This quad monolithic silicon voltage suppressor is designed for applications
BD809 (NPN), BD810 (PNP) Plastic High Power Silicon Transistor 10 AMPERE POWER TRANSISTORS 80 VOLTS 90 WATTS
BD89 (NPN), BD8 (PNP) Plastic High Power Silicon Transistor These devices are designed for use in high power audio amplifiers utilizing complementary or quasi complementary circuits. Features DC Current
NUP4302MR6T1G. Schottky Diode Array for Four Data Line ESD Protection
Schottky Diode Array for Four Data Line ESD Protection The NUP432MR6 is designed to protect high speed data line interface from ESD, EFT and lighting. Features Very Low Forward Voltage Drop Fast Switching
NTMS5838NL. Power MOSFET 40 V, 7.5 A, 20 m
Power MOSFET V, 7.5 A, 2 m Features Low R DS(on) Low Capacitance Optimized Gate Charge These Devices are Pb Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS ( unless otherwise stated)
NVD5117PLT4G. Power MOSFET 60 V, 16 m, 61 A, Single P Channel
Power MOSFET 6 V, 16 m, 61 A, Single P Channel Features Low R DS(on) to Minimize Conduction Losses High Current Capability Avalanche Energy Specified AEC Q11 Qualified These Devices are Pb Free, Halogen
NTTFS3A08PZTWG. Power MOSFET 20 V, 15 A, Single P Channel, 8FL
NTTFS3A8PZ Power MOSFET V, 5 A, Single P Channel, 8FL Features Ultra Low R DS(on) to Minimize Conduction Losses 8FL 3.3 x 3.3 x.8 mm for Space Saving and Excellent Thermal Conduction ESD Protection Level
MMBZxxxALT1G Series, SZMMBZxxxALT1G Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZxxxALTG Series, SZMMBZxxxALTG Series 24 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed
NUD4700. LED Shunt. Features. Typical Applications MARKING DIAGRAM PIN FUNCTION DESCRIPTION ORDERING INFORMATION.
LED Shunt The is an electronic shunt which provides a current bypass in the case of a single LED going into open circuit. LEDs are by nature quite fragile when subjected to transients and surge conditions.
EMC2DXV5T1G, EMC3DXV5T1G, EMC4DXV5T1G, EMC5DXV5T1G. Dual Common Base-Collector Bias Resistor Transistors
EMCDXV5TG, EMCDXV5TG, EMCDXV5TG, EMC5DXV5TG Dual Common Base-Collector Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor
NVD5865NL. Power MOSFET 60 V, 46 A, 16 m, Single N Channel
Power MOSFET 6 V, 6 A, 16 m, Single N Channel Features Low R DS(on) to Minimize Conduction Losses High Current Capability Avalanche Energy Specified AEC Q1 Qualified These Devices are Pb Free, Halogen
MUN2111T1 Series, SMUN2111T1 Series. Bias Resistor Transistors. PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
MUNT Series, SMUNT Series Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device
NTLUD3A260PZ. Power MOSFET 20 V, 2.1 A, Cool Dual P Channel, ESD, 1.6x1.6x0.55 mm UDFN Package
NTLUDAPZ Power MOSFET V,. A, Cool Dual P Channel, ESD,.x.x. mm UDFN Package Features UDFN Package with Exposed Drain Pads for Excellent Thermal Conduction Low Profile UDFN.x.x. mm for Board Space Saving
NSV2029M3T5G. PNP Silicon General Purpose Amplifier Transistor PNP GENERAL PURPOSE AMPLIFIER TRANSISTORS SURFACE MOUNT
PNP Silicon General Purpose Amplifier Transistor This PNP transistor is designed for general purpose amplifier applications. This device is housed in the package which is designed for low power surface
1 A Constant-Current LED Driver with PWM Dimming
1 A Constant-Current Driver with PWM Dimming FEATURES Accurate 1 A current sink Up to 25 V operation on pin Low dropout 500 mv at 1 A current set by external resistor High resolution PWM dimming via EN/PWM
MMUN2111LT1G, SMMUN21xxLT3G. NSVMMUN2111LT1G Series. Bias Resistor Transistors
MMUNLTG, SMMUNLTG, NSVMMUNLTG Series Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace
NTA4153N, NTE4153N, NVA4153N, NVE4153N. Small Signal MOSFET. 20 V, 915 ma, Single N Channel with ESD Protection, SC 75 and SC 89
NTA45N, NTE45N, NVA45N, NVE45N Small Signal MOSFET V, 95 ma, Single N Channel with ESD Protection, SC 75 and SC 89 Features Low R DS(on) Improving System Efficiency Low Threshold Voltage,.5 V Rated ESD
MMBZ15VDLT3G MMBZ27VCLT1G SZMMBZ15VDLT3G. SZMMBZ27VCLT1G 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZ15VDLT1G, MMBZ27VCLT1G, SZMMBZ15VDLT1G, SZMMBZ27VCLT1G 40 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Cathode Zeners for ESD Protection These dual monolithic silicon zener diodes
MJD44H11 (NPN) MJD45H11 (PNP)
MJDH (NPN) MJD5H (PNP) Preferred Device Complementary Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such
BC856BDW1T1G, BC857BDW1T1G Series, BC858CDW1T1G Series
BC856BDW1T1G, BC857BDW1T1G Series, BC858CDW1T1G Series Preferred Devices Dual General Purpose Transistors PNP Duals These transistors are designed for general purpose amplifier applications. They are housed
NSTB1005DXV5T1, NSTB1005DXV5T5. Dual Common Base Collector Bias Resistor Transistors
NSTB005DXV5T, NSTB005DXV5T5 Preferred Devices Dual Common Base Collector Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor
MMBZxxxALT1G Series, SZMMBZxxxALT1G Series. 24 and 40 Watt Peak Power Zener Transient Voltage Suppressors
MMBZxxxALTG Series, SZMMBZxxxALTG Series 24 and 4 Watt Peak Power Zener Transient Voltage Suppressors Dual Common Anode Zeners for ESD Protection These dual monolithic silicon Zener diodes are designed
LM339S, LM2901S. Single Supply Quad Comparators
LM339S, LM290S Single Supply Quad Comparators These comparators are designed for use in level detection, low level sensing and memory applications in consumer and industrial electronic applications. Features
NTLUS3A90PZ. Power MOSFET 20 V, 5.0 A, Cool Single P Channel, ESD, 1.6x1.6x0.55 mm UDFN Package
NTLUS3A9PZ Power MOSFET V, 5. A, Cool Single P Channel, ESD,.x.x.55 mm UDFN Package Features UDFN Package with Exposed Drain Pads for Excellent Thermal Conduction Low Profile UDFN.x.x.55 mm for Board Space
NSR0340V2T1/D. Schottky Barrier Diode 40 VOLT SCHOTTKY BARRIER DIODE
Schottky Barrier Diode Schottky barrier diodes are optimized for very low forward voltage drop and low leakage current and are used in a wide range of dc dc converter, clamping and protection applications
MMSZxxxET1G Series, SZMMSZxxxET1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxETG Series, SZMMSZxxxETG Series Zener Voltage Regulators mw SOD Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD package. These devices
NTR4101P, NTRV4101P. Trench Power MOSFET 20 V, Single P Channel, SOT 23
NTRP, NTRVP Trench Power MOSFET V, Single P Channel, SOT Features Leading V Trench for Low R DS(on). V Rated for Low Voltage Gate Drive SOT Surface Mount for Small Footprint NTRV Prefix for Automotive
1SMB59xxBT3 Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBT Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
NGB8207AN, NGB8207ABN. Ignition IGBT 20 A, 365 V, N Channel D 2 PAK. 20 AMPS, 365 VOLTS V CE(on) = 1.75 V I C = 10 A, V GE 4.
NGB827AN, NGB827ABN Ignition IGBT 2 A, 365 V, N Channel D 2 PAK This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Overvoltage clamped protection
ASM3P2669/D. Peak EMI Reducing Solution. Features. Product Description. Application. Block Diagram
Peak EMI Reducing Solution Features Generates a X low EMI spread spectrum clock of the input frequency. Integrated loop filter components. Operates with a 3.3V / 2.5V supply. Operating current less than
7WB Bit Bus Switch. The 7WB3126 is an advanced high speed low power 2 bit bus switch in ultra small footprints.
2-Bit Bus Switch The WB326 is an advanced high speed low power 2 bit bus switch in ultra small footprints. Features High Speed: t PD = 0.25 ns (Max) @ V CC = 4.5 V 3 Switch Connection Between 2 Ports Power
MMBT2222AWT1G SMMBT2222AWT1G. General Purpose Transistor. NPN Silicon
MMBT2222AWTG, SMMBT2222AWTG General Purpose Transistor NPN Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT323/SC7 package which is designed
NSS12200WT1G. 12 V, 2 A, Low V CE(sat) PNP Transistor. 12 VOLTS 2.0 AMPS PNP LOW V CE(sat) TRANSISTOR EQUIVALENT R DS(on) 163 m
NSS22WTG 2, 2 A, Low CE(sat) PNP Transistor ON Semiconductor s e 2 PowerEdge family of low CE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage ( CE(sat) ) and
NTHD4502NT1G. Power MOSFET. 30 V, 3.9 A, Dual N Channel ChipFET
NTHDN Power MOSFET V,.9 A, Dual N Channel ChipFET Features Planar Technology Device Offers Low R DS(on) and Fast Switching Speed Leadless ChipFET Package has % Smaller Footprint than TSOP. Ideal Device
MBRA320T3G Surface Mount Schottky Power Rectifier
Surface Mount Schottky Power Rectifier Power Surface Mount Package Employing the Schottky Barrier principle in a large area metal-to-silicon power diode. State of the art geometry features epitaxial construction
MRA4003T3G Series, NRVA4003T3G Series. Surface Mount Standard Recovery Power Rectifier. SMA Power Surface Mount Package
MRA43T3G Series, NRVA43T3G Series Surface Mount Standard Recovery Power Rectifier Power Surface Mount Package Features construction with glass passivation. Ideally suited for surface mounted automotive
SA5.0A Series 500 Watt Peak Power MiniMOSORB Zener Transient Voltage Suppressors
5 Watt Peak Power MiniMOSORB Zener Transient Voltage Suppressors Unidirectional The SA5.A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have
NTD5805N, NVD5805N. Power MOSFET 40 V, 51 A, Single N Channel, DPAK
NTD585N, NVD585N Power MOSFET V, 5 A, Single N Channel, Features Low R DS(on) High Current Capability Avalanche Energy Specified NVD Prefix for Automotive and Other Applications Requiring Unique Site and
MJD44H11 (NPN) MJD45H11 (PNP) Complementary Power Transistors. DPAK For Surface Mount Applications
MJDH (NPN) MJD5H (PNP) Complementary Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such as switching
NL27WZ17. Dual Non-Inverting Schmitt Trigger Buffer
Dual Non-Inverting Schmitt Trigger Buffer The N7WZ7 is a high performance dual buffer operating from a to supply. At =, high impedance TT compatible inputs significantly reduce current loading to input
NSS20101J, NSV20101J. 20 V, 1.0 A, Low V CE(sat) NPN Transistor. 20 VOLTS, 1.0 AMPS NPN LOW V CE(sat) TRANSISTOR
NSSJ, NSVJ V,. A, Low V CE(sat) NPN Transistor ON Semiconductor s e PowerEdge family of low V CE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (V CE(sat) )
MMSZ4678ET1 Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZ4678ET Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices provide a convenient
1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional
110CAT3G Series, SZ110CAT3G Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.