Busch-dynasty Covers for switches/ push-buttons

Size: px
Start display at page:

Download "Busch-dynasty Covers for switches/ push-buttons"

Transcription

1 BUSCH-JAEGER Innovations 0

2 Busch-dynasty Covers for switches/ push-buttons Article-o. Order-o. Rocker For flush-mounted switch gw, gw, intermediate, push switch. anthracite 0 antique brass ) /00 0/00 0/00 0 ) Real metal surface refined by hand. Rocker For flush-mounted switch g w, g push switch. anthracite 0 antique brass ) / ) Real metal surface refined by hand. Rocker with red neon lens As cover for flush-mounted gang way, gang way switch, intermediate switch, push-button and control switch gang way. anthracite 0 antique brass ) ) Real metal surface refined by hand. Rocker ) ) with labelling field With pilot lamp for uniform illumination of the labelling field. For flush-mounted switch gw, gw, intermediate, push switch. Size of labelling field: x 0 mm. anthracite 0 antique brass ) LI- LI- LI ) For compatible lettering software, visit ) Illumination using neon lamp or incandescent lamp - and LED inserts. ) Plastic surface refined by hand. Cover plate For card switch. For insert 0 U. Suitable for cards sized x mm. The inner part of the cover plate is made of light-conducting plastic, so that the card slot is illuminated. anthracite 0 antique brass ) ) Plastic surface refined by hand. Innovations Article-o. Order-o. Rocker With marking. For flush-mounted switch g w, g push switch. With Marking " DO OT DISTURB / MAKE UP ROOM" 0 antique brass ) /- /-0-00 ) Real metal surface refined by hand

3 Busch-dynasty Socket outlets Article-o. Order-o. SCHUKO socket outlet ) ) with screw-type terminals With screw-type terminals. DP ( P + E) Rated voltage: 0 V~ Rated current: A antique brass anthracite antique brass EUCKS EUCKS SCHUKO socket outlet ) ) shuttered With screwless terminals. DP ( P + E) Rated voltage: 0 V~ Rated current: A 0 EUCKS EUCKS /00 ) Increased shock protection. ) Real metal surface refined by hand. anthracite 0 antique brass ) ) ) ) ) 0 EUCBLI EUCBLI antique brass anthracite antique brass ) Real metal surface refined by hand EUCBUSB EUCBUSB EUCBUSB MUCKS MUCKS ) Socket outlet with integrated child protection. Replaces the usual term"...with child protection". ) Real metal surface refined by hand. SCHUKO socket outlet with hinged lid With screwless terminals. DP ( P + E) Hinged lid notches when opened. Rated voltage: 0 V~ Rated current: A 0 EUK- 0 EUK-0-00 Socket outlet ) ) with earthing pin With screw-type terminals. Shuttered. Suitable for the countries: Belgium, Poland, Czech Republic. DP ( P + E) Rated voltage: 0 V~ ) Connecting terminals approved in accordance with VDE 00- as connectors. ) Plastic surface refined by hand. 0 antique brass ) Connecting terminals approved in accordance with VDE 00- as connectors. o data transfer. Use dust cover 0 when cleaning the device. Plastic surface refined by hand. SCHUKO socket outlet steplight ) With night orientation light with separate connection cables for switch contact. with LED, Shuttered. DP ( P + E) Rated voltage: 0 V~ Rated current: A ivory 0 antique brass ) Order-o. SCHUKO USB socket outlet ) ) ) shuttered With screwless terminals. Shuttered. DP ( P + E) For supply and support of mobile devices via USB-cable. With USB female connector type A. With electronic short-circuit protection. With electronic overload protection. Simultaneous charging via USB connection and use of the SCHUKO socket outlet. Rated voltage: 0 V~ Secondary: V-, + % / - % Rated frequency: 0 Hz Suitable for: SCHUKO socket outlet Rated current: A Suitable for: USB connection Rated current: 00 ma Protection class (Device): IP 0, SELV Temperature range (Device): C to C Dimensions: (L x W x D): mm x mm x mm Mounting depth: mm ) Increased shock protection. ) Real metal surface refined by hand. antique brass anthracite antique brass Article-o. 0 0 A Switched socket outlet gang With screw-type terminals. SP switched Without claws. Only for mounting in VDE flush-mounted wallboxes CFB and CFBM. Rated voltage: 0 V~ Rated current: A BS : part 0 anthracite 0 antique brass ) 0 EUC- 0 EUC- 0 EUC /00 0/ ) Real metal surface refined by hand. Technical information Innovations 0

4 Busch-dynasty Covers for data communication Order-o. Article-o. Intermediate ring For fitting cover plates from the Busch-Duro 000 SI and Reflex SI range. 0 antique brass ) SI- SI /0 anthracite 0 antique brass ) Blank plate with metal mounting plate anthracite 0 antique brass ) Cover plate ) with metal mounting plate As cover for flex outlet, for cords up to 0. mm diameter. With strain relief (without terminal block) / Cover plate ) ) as cover for standard Radio/TV/SAT socket outlets With connectors Acc. to German Standard DI 0. Radio/TV/SAT. With M fixing screw ) Real metal surface refined by hand. ) Real metal surface refined by hand. anthracite 0 antique brass ) Order-o. Cover plate For telephone connection unit. For USB, VGA, HDMI inserts and communication adapter. For loudspeaker connection box. USB power adapter insert U. Suitable for part number 0/0x-0. For data modules. Suitable for Art. o. 0/ and 0/. For modular outlets with 0 RJ outlet from Telegärtner (type MJ and WE). 0 ) Plastic surface refined by hand. Article-o. anthracite 0 antique brass ) ) Third opening can be knocked out. ) See inserts for satellite coaxial socket outlets. ) Real metal surface refined by hand. Cover plate ) with labelling field For modular jack with slide entrance. To fit only Art. o. 0,,,,, and 0. Size of labelling field: 0. x. mm. 0 ) Cover plate can also be used individually as cover for telephone connector boxes (VDo). ) Real metal surface refined by hand. Cover plate ) As cover for universal data connection boxes. Art.-o. 0 (Cat /ISD), 0-0, 0/-0 (Cat e/ data technology) and comparable types of the company Rutenbeck. For WLA access points / and /. Brand-Rex (WAEGV EKR/EK). BTR ( universal data connecting unit design and IAE design). Telegärtner (AMJ, UMJ ). With down-leading outlet. With labelling field. Size of labelling field: 0. x. mm. anthracite 0 antique brass ) ) For compatible lettering software, visit ) Real metal surface refined by hand ) For compatible lettering software, visit ) Real metal surface refined by hand. Innovations / ) For compatible lettering software, visit ) Real metal surface refined by hand. Cover plate with hinged lid For telecommunication inserts with cover plate 0 x 0 mm. With cover plate 0 x 0 mm, AMP, Brand-Rex, Rutenbeck, BTR, Telegärtner, etc. anthracite 0 antique brass ) ) Plastic surface refined by hand. Cover plate ) gang As cover for universal data connection boxes. Art. o. 0, 0 (Cat ), 00/-0, 0/-0, 0, 0 (Cat e/ data technology) and comparable types of the company Rutenbeck. Brand-Rex (WAEGV / EKR/EK). AMP (ETCOECT E). BTR (E-DAT C, E-DAT design, Universal data connecting unit design and IAE design). cti (cti-wire. Cat.). Telegärtner (AMJ, UMJ ). With down-leading outlet. With labelling field. Size of labelling field: 0. x. mm. anthracite 0 antique brass ) anthracite 0 antique brass )

5 Busch-dynasty Covers for LED light Busch-dynasty Covers for multimedia/ communication adapter Article-o. Order-o. Cover plate For Busch-DigitalRadio U/ U. For Busch-Radio iet U. anthracite 0 antique brass ) anthracite 0 antique brass ) ) Included with the cover are different text labels and symbols. ) For compatible lettering software, visit ) Plastic surface refined by hand. Cover plate For loudspeaker insert U Order-o. Cover plate ) ) As cover for flush-mounted info light. For insert 0 U. Size of information field x mm. ) Plastic surface refined by hand. anthracite 0 antique brass ) Article-o. /0 /0 /0 ) Plastic surface refined by hand. Cover plate For USB charging station U. With protective function against lateral slipping of the mobile telephone. Suitable for devices with a maximum thickness of mm. With frontal mounting option of connecting cable. anthracite 0 antique brass ) ) Plastic surface refined by hand. Cover plate *) For Busch-iDock U. anthracite 0 antique brass *) Phase-out type Cover plate For Busch Bluetooth receiver U. anthracite 0 antique brass ) Available from June ) Surface painted. Technical information Innovations 0

6 Busch-dynasty Control elements for room temperature controllers Article-o. Order-o. Busch-dynasty Control elements for dimmers Cover plate for room thermostat For room thermostats 0 U/UF, 0 U/UF. anthracite 0 antique brass ) anthracite 0 antique brass ) ) Plastic surface refined by hand /00 0 ) Replacement neon lamp, Art. o.. ) Real metal surface refined by hand. Cover plate for room thermostat With sliding switch for nightly room temperature reduction. to activate nighttime mode and reduction of room temperature by K, for thermostats 0 U, 0 U and 0 UF Order-o. Cover plate ) with rotary knob, with indication lamp Elevated knob. For Busch-Dimmer. For inserts U-0/(/) U/ (/) U/ U/0 U/ U-0/ U-0x/ U/ 0 U/ U(0x) / U-0x and U. ) Plastic surface refined by hand. anthracite 0 antique brass ) Article-o Control element ) ) ) with neon lamp Can be combined with LED dimmer U, and U, Busch-Universal touch-type controller 0 U-0x, Busch-Memory touch dimmer 0 U-0, Busch-Universal-Dimmer U, Busch-Universal relay insert 0 U-0x, Busch-Universal gang insert 0 U. anthracite 0 antique brass ) ) ) ) ) /0 /0 /0 Compatible with previous type -xxx. Touch-type Controller 0 U-xxx non-illuminable. Replacement neon lamp. Plastic surface refined by hand. Control element ) with neon lamp Combinable with Busch-Memory gang dimmer U. anthracite 0 antique brass ) ) Replacement neon lamp. ) Real metal surface refined by hand. Innovations /0 /0 /0

7 Busch-dynasty Control elements for Venetian blind control unit/timers Busch-dynasty Control elements for movement detectors/comfort switches Article-o. Order-o. Busch-Watchdog 0 flush-mounted comfort sensor II ) ) with multi-lens For automatic switching of devices dependent on motion and brightness. For down-to-ground detection. For relay inserts 0 U-0, 0 U and U-0. For MOS-Fet insert U-0. For Dimmer insert U. For extension insert 0 U. With integrated selector switch for O-AUTOMATIC-OFF (lockable). Soft phase-out: In combination with the U (mode of operation: Soft OFF) the illumination is dimmed down within 0 sec and switched off. Surveillance density: sectors with switching segments. Switch-off delay: 0 sec to 0 min or short-time pulse sec adjustable. Detection range: frontal: m, lateral: m, Mounting height:. m Detection range : frontal: 0 m, lateral:. m, Mounting height:. m Detection angle: 0 Brightness limit value: Lux Up to daytime operation Mounting height: 0. m -. m alternative:. m Protection class (Sensor): IP 0 Temperature range (Device): 0 C to C anthracite 0 antique brass ) 00--M M M anthracite 0 antique brass ) /0 /0 /0 JA- JA- JA ) Real metal surface refined by hand. Cover plate with rotary control, with marking As cover for flush-mounted blind control switch/push switch. For inserts U, U and U, U. anthracite 0 antique brass ) /0 0 ) Real metal surface refined by hand. Control element For Busch-Blind control II insert U-0, U/S-0. For basic blind insert U. For Busch-Universal gang way insert 0 U. ) installation: slide switch top. ) Please order the respective flush-mounted insert separately. ) Plastic surface refined by hand. anthracite 0 antique brass ) Order-o. Rocker with marking As cover for flush-mounted blind control switch/push switch. For inserts 000/ and 00/ US. Busch-Comfort switch control element ) with neon lamp For -wire insert U. For relay insert U. Adjustable operating mode: semiautomatic mode, automatic switch-on, manual switch-off. Adjustable operating mode: automatic timer, manual switchon, automatic (timer and motion-controlled) switch-off. Adjustable operating mode: automatic mode, automatic (motion-controlled) switch-on and switch-off. Push switch function possible at all times. Switch-off delay: to 0 min., adjustable. Surveillance density: sectors with switching segments. Detection range: frontal: m, lateral: m Detection angle: 0 Brightness limit value: 0. Lux - 00 Lux, Daytime operation Mounting height: 0. m -. m Protection class (Sensor): IP 0 Temperature range (Device): 0 C to C Article-o. anthracite 0 antique brass /0 /0 0 0 /0 Cover plate ) with rotary knob For comfort blinds insert U. anthracite 0 antique brass ) ) Continuous lighting of the turn knob possible using glow lamp. ot included in delivery. eutral wire required for operation with neon lamp. ) Real metal surface refined by hand. Cover plate For comfort timer control element For standard timer control element -0. For room thermostats 0 U-0 and 0 UF-0. For short-time timer U-0. ) Please order the respective flush-mounted insert separately. ) Plastic surface refined by hand. anthracite 0 antique brass ) ) Plastic surface refined by hand. Technical information Innovations 0

8 Busch-dynasty WaveLIE control elements Article-o. Busch-dynasty cover frames Order-o. Wall-mounted transmitter WaveLIE ) ) -channel gang wall-mounted transmitter independent of mains power supply. With labelling field and labelling strip. For switching and dimming. For controlling blinds and light scenes. radio channel can be operated or up to light scenes can be called up. For flush-mounted WaveLIE actuators 0-0, 0, 0, and 0-0. For LED display WaveLIE 0-xxx. Compatible with WaveLIE KX gateway TP-RF 0. Send frequency: MHz. Free-field range: approx. 00 m. Power supply: lithium button cell battery Type CR0. Battery service life: typically years, therefore practically maintenance-free. Automatic monitoring of battery life. Including fixing plate for mounting on smooth walls or on switch boxes. Control element: rocker switch left/right Display elements: LED to indicate the transmission Rated voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 antique brass ) /0 ) Battery included in delivery. ) For compatible lettering software, visit ) Plastic surface refined by hand. Wall-mounted transmitter WaveLIE ) ) -channel gang wall-mounted transmitter independent of mains power supply. With labelling field and labelling strip. For switching and dimming. For controlling blinds and light scenes. radio channels can be operated or up to light scenes can be called up. For flush-mounted WaveLIE actuators 0-0, 0, 0, and 0-0. For LED display WaveLIE 0-xxx. Compatible with WaveLIE KX gateway TP-RF 0. Send frequency: MHz. Free-field range: approx. 00 m. Power supply: lithium button cell battery Type CR0. Battery service life: typically years, therefore practically maintenance-free. Automatic monitoring of battery life. Including fixing plate for mounting on smooth walls or on switch boxes. Control element: rocker switch left/right Display elements: LED to indicate the transmission Rated voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 antique brass ) ) Battery included in delivery. ) For compatible lettering software, visit ) Plastic surface refined by hand. Innovations 0 /0 Article-o Cover frame gang frame For vertical or horizontal installation. anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 ) Real metal surface. ) Real metal surface refined by hand. Order-o

9 Busch-dynasty cover frames Article-o. Order-o. Cover frame gang frame For vertical or horizontal installation. anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 ) Real metal surface. ) Real metal surface refined by hand. Technical information Article-o. Order-o Cover frame gang frame For vertical or horizontal installation anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) ) Real metal surface. ) Real metal surface refined by hand. Innovations 0

10 Busch-dynasty cover frames Article-o. Order-o. Cover frame gang frame For vertical or horizontal installation. anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 ) Real metal surface. ) Real metal surface refined by hand. 0 Innovations 0 Article-o. Order-o Cover frame gang frame For vertical or horizontal installation anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 anthracite polished brass decor anthracite ) --00 polished brass anthracite ) --00 polished brass decor )--00 polished brass ) --00 antique brass decor anthracite ) --00 antique brass anthracite ) --00 antique brass decor )--00 antique brass ) --00 ) Real metal surface. ) Real metal surface refined by hand

11 Universal data connection units Millenium Article-o. Order-o. Room thermostat ) ) heating/cooling operation/fancoil For ABB i-bus KX Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. The controller is a thermostat for Fan Coil units in - and -pipe systems and conventional heating or cooling systems. Master/slave configuration. With base-load operation. The fan stage can be switched manually or in automatic mode. Incl. 0 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Switch contacts for operating mode selection and dial for setpoint or fan speed adjustment. Display elements: LCD showing operation modes Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm / ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher Article-o. TS/T TS/MIIMAC Order-o. UAE connection unit, RJ, cat. e, shielded ) gang With down-leading outlet and LSA self-cutting clamps. Cat. according to DI E 0-:00-0, ISO/IEC 0:00, and TIA/EIA--B.:00. Marking in accordance with EIA/TIA A and B. According to E 0 0--:00-0. Shielding according to DI E 0, Class B. Up to 0 MHz on all pairs of wires. Suitable for Gigabit Ethernet. Suitable for PoE+ according to IEEE 0.at, >-.00 contact durability. Flex cable entries from all sides without buckles. Earthing of housing via, mm blade terminal at the back possible. Suitable for Mix-and-Match operation. Suitable for RJ, RJ und RJ. Clearly colour-coded connection identification. For data cables with a diameter of -0 mm. For wires of AWG -. For trunk systems, flush-mounted wall boxes and underfloor systems. Without claws. Mounting depth: mm. 0-0 Transponder reader For ABB i-bus KX External supply: - AC/DC Absorption: max 0 ma from the BUS. External supply to be sized for -W peak. umber of outputs: bistable relay AC/DC. umber of inputs: on the rear side, O, max. connection length 0m. Ambient conditions: class k (indoor rooms and dry rooms. Relative humidity: max 0% (non condensating). Protection class (Device): IP 0 Temperature range (Device): - C to 0 C Dimensions: (L x W x D): m x m ) TR/U ) For software and description please check the current Online-Catalogue /0 0 ) Suitable for cover plate 0-xxx. UAE connection unit, RJ, cat. e, shielded ) x outlets, /-pole With down-leading outlet and LSA self-cutting clamps. Cat. according to DI E 0-:00-0, ISO/IEC 0:00, and TIA/EIA--B.:00. Marking in accordance with EIA/TIA A and B. According to E 0 0--:00-0. Shielding according to DI E 0, Class B. Up to 0 MHz on all pairs of wires. Suitable for Gigabit Ethernet. Suitable for PoE+ according to IEEE 0.at, >-.00 contact durability. Flex cable entries from all sides without buckles. Earthing of housing via, mm blade terminal at the back possible. Suitable for Mix-and-Match operation. Suitable for RJ, RJ und RJ. Clearly colour-coded connection identification. For data cables with a diameter of -0 mm. For wires of AWG -. For trunk systems, flush-mounted wall boxes and underfloor systems. Without claws. Mounting depth: mm /0 0 ) Suitable for cover plate 0-0-xxx. Technical information Innovations 0

12 Busch-Radio Article-o. Order-o. Busch-Radio BTconnect ) complete set Ready-to-install complete set for mono operation. With Bluetooth interface for music replay of mobile devices. Consisting of the Busch-Radio BTconnect U. Consisting of speaker insert U. Consisting of the cover plate for the Busch-Radio. Consisting of cover plate for speaker insert -. Consisting of gang future linear cover frame -K. Rated voltage: 0-0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Dimensions: (L x W x D): 0 mm x 0 mm x mm Mounting depth: mm Available from June Order-o. Article-o. Busch Bluetooth receiver ) ) ) ) Bluetooth interface for music replay of mobile devices. With integrated amplifier. With external AUX input. For mono/stereo operation. Can be combined with the MDRC amplifier 0. Admissible loudspeaker impedance: - Ohm Can be installed as gang and in multiple combinations. Bluetooth specification:.0 Bluetooth profiles supported: ADP umber of stored Bluetooth connections: max. Display elements: LED for status display. Rated voltage: 0-0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): C to 0 C Dimensions: (L x W x D): mm x mm x mm Mounting depth: mm ) o claw. Screw-fixing via keyholes. Busch Bluetooth receiver, complete set ) complete set Ready-to-install complete set for mono operation. Consisting of Busch Bluetooth receiver U. Consisting of speaker insert U. Consisting of the cover plate for the Busch Bluetooth receiver. Consisting of cover plate for speaker insert -. Consisting of gang future linear cover frame -K. Rated voltage: 0-0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Dimensions: (L x W x D): 0 mm x 0 mm x mm Mounting depth: mm 0- Available from June U U-00 Available from June ) o claw. Screw-fixing via keyholes. ) Passender Lautsprecher-Einsatz U. ) Also combinable with built-in ceiling loudspeaker ( EB & EB) and HiFi built-in ceiling loudspeaker (/ EB). ) Can also be combined with built-in loudspeaker ( EB) and moist atmosphere loudspeaker ( EB). Innovations 0 Cover plate For Busch Bluetooth receiver U. Busch-Radio BTconnect ) ) ) ) ) RDS stereo radio with graphic display for flush-mounted installation. With Bluetooth interface for music replay of mobile devices. Reception frequency:.0 MHz MHz. With external AUX input. For mono/stereo operation. radio stations storable. With time and date display. With alarm clock and snooze function. With short-time timer. With automatic switch-off function (automatic sleep mode). With extension input to remote-controlled O/OFF switches. With integrated antenna. With additional connection for external antenna. Permitted speaker impedance: - Ohm Can be installed as gang and in multiple combinations. Bluetooth specification:. Bluetooth profiles supported: ADP umber of stored Bluetooth connections: max. Rated voltage: 0-0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): C to 0 C Dimensions: (L x W x D): mm x mm x mm Mounting depth: mm /0 ) o claw. Screw-fixing via keyholes. ) Passender Lautsprecher-Einsatz U. ) Also combinable with built-in ceiling loudspeaker ( EB & EB) and HiFi built-in ceiling loudspeaker (/ EB). ) Can also be combined with built-in loudspeaker ( EB) and moist atmosphere loudspeaker ( EB). Busch-Duro 000 SI ) o claw. Screw-fixing via keyholes. Available from June white - Available from June Available from June /00 Reflex SI alpine white -

13 Busch-Radio Order-o. Article-o. Cover plate For Busch Bluetooth receiver U. anthracite aluminium silver ) matt ) black matt ) Available from June /00 0/00 solo 0 grey metallic ) yellow Available from June Busch-axcent chalet-white - - Available from June / Available from June /00 pure stainless steel ) stainless steel - Available from June ) Surface painted. Built-in ceiling loudspeaker cm (") With broadband characteristics. For mounting in hollow walls/ceilings. With spring brackets. In corrosion-resistant metal design. For Busch-DigitalRadio U/ U. For Busch-Radio iet U. For Busch-Radio BTconnect U. For Busch Bluetooth receiver U. MDRC amplifier 0. With integrated loudspeaker grid. With screwless terminals. ominal power: 0 W Frequency response: 0-0,000 Hz Impedance: Ohm Drilling measurements: 0 mm Protection class (Device): IP 0, SELV Temperature range (Device): -0 C to 0 C Dimensions: (L x W x D): 0 mm x 0 mm x mm Mounting depth: mm EB Available from June Technical information /0 EB Available from June /0 HiFi built-in ceiling loudspeaker cm (") -way system. For mounting in hollow walls/ceilings. With spring brackets. In corrosion-resistant metal design. For Busch-DigitalRadio U/ U. For Busch-Radio iet U. For Busch-Radio BTconnect U. For Busch Bluetooth receiver U. MDRC amplifier 0. With integrated loudspeaker grid. With screwless terminals. ominal power: 0 W Frequency response: 0-0,000 Hz Impedance: Ohm Drilling measurements: mm Protection class (Device): IP 0, SELV Temperature range (Device): -0 C to 0 C Dimensions: (L x W x D): mm x mm x mm Mounting depth: mm carat anthracite Order-o. Built-in ceiling loudspeaker cm (") With broadband characteristics. For mounting in hollow walls/ceilings. With spring brackets. In corrosion-resistant metal design. For Busch-DigitalRadio U/ U. For Busch-Radio iet U. For Busch-Radio BTconnect U. For Busch Bluetooth receiver U. MDRC amplifier 0. With integrated loudspeaker grid. With screwless terminals. ominal power: 0 W Frequency response: 0-0,000 Hz Impedance: Ohm Drilling measurements: mm Protection class (Device): IP 0, SELV Temperature range (Device): -0 C to 0 C Dimensions: (L x W x D): mm x mm x mm Mounting depth: mm future linear Article-o. /0 EB Available from June /0 Innovations 0

14 WLA access point Article-o. Order-o. Flush-mounted rotary dimmer WLA access point, flush-mounted ) ) power supply from mains power Operation as WLA access point for the connection of WLA terminal devices to the LA. Operation as WLA repeater for extending the transmission range of a WLA. Operation as WLA adapter for integrating Ethernet terminal devices into a WLA. Supports WLA standards IEEE 0.b/g/n with. GHz; integrated WLA antenna. Backward connection of an Ethernet cable via screw terminals (0/00 Mbit/s). Front-side Ethernet connection via a RJ socket (0/00 Mbit/s). The three connections (WLA, Ethernet/screw terminals and Ethernet/RJ)can be used in parallel via the integrated switch. Power supply via -pole connecting terminal. ominal voltage: 00-0 V~ For mounting in commercially available deep flush-mounted and hollow-wall boxes. Rated frequency: 0 Hz - 0 Hz / Article-o. Order-o. Busch-rotary dimmer ) Flush-mounted, DALI, tunable white For DALI broadcast service (via central telegram). For switching and dimming up to DALI- devices like electronic ballasts and transformers with DALI-interface. With rotary control and O/OFF push operation. Fool proved. For changing the colour temperature of "tunable white" lamps, which meet DALI Standard IEC -0 (Device Type ). Colour temperature can then be set between,00 K,00 K. Brightness power-on level and backround brightness level adjustable, buffered. With integrated LED illumination for orientation. Color of orientation light adjustable ( presets and OFF). Up to potentiometers are connectable in parallel. Max. current consumption: ma. ot suitable for combining with other DALI sensors or central units of other manufacturers. For the generation of the DALI voltage a power supply according to IEC is required; e.g. from Tridonic, Philips, Helvar or BJE article no. / U. Max. DALI-cable length: 00 m (, -, mm²). Without cover plate. Protection class (Device): IP 0 Temperature range (Device): 0 C to C ) Suitable for cover plate 0-xxx. ) ot to be mounted in SM box 0-xxx, 0-xxx, 0-xxx. Reset magnet For resetting WLA access point UP /-0 and WLA access point PoE UP / to the factory settings. / U -0-0 ) Only in conjunction with standard flush-mounting boxes according to DI 0, Part, erect or Busch-Jaeger o. 0 wallbox stonework, 00 wallbox cavity wall or 00 wallbox concrete) Busch-rotary dimmer ) Flush-mounted, DALI, with internal power supply, tunable white For DALI broadcast service (via central telegram). For switching and dimming up to DALI- devices like electronic ballasts and transformers with DALI-interface. With rotary control and O/OFF push operation. For changing the colour temperature of "tunable white" lamps, which meet DALI Standard IEC -0 (Device Type ). Colour temperature can then be set between,00 K,00 K. With electronic short-circuit protection. With electronic overload protection. Brightness power-on level and backround brightness level adjustable, buffered. With integrated LED illumination for orientation. Color of orientation light adjustable ( presets and OFF). Up to potentiometers are connectable in parallel. Up to potentiometers are connectable in parallel in active mode. ot suitable for combining with other DALI sensors or central units of other manufacturers. DALI-voltage:, V= Rated current: max. ma Power consumption: <, W umber of DALI-units: in case of one active power-potentiometer in case of three active power-potentiometer in parallel connection: Active mode: the potentiometer is supporting the necessary control circuit for other DALI-devices. Passive mode: the potentiometer is suitable as additional operation point. Max. DALI-cable length: 00 m (, -, mm²). Without cover plate. Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): 0 C to C / U -0-0 ) Only in conjunction with standard flush-mounting boxes according to DI 0, Part, erect or Busch-Jaeger o. 0 wallbox stonework, 00 wallbox cavity wall or 00 wallbox concrete) Innovations 0

15 Flush-mounted touch dimmer Flush-mounted rotary dimmer Article-o. Order-o. Busch-rotary dimmer ) ) ) ) ) ) ) ) Flush-mounted, LED, -00 W With rotary control, two-way switch and soft-catch. -wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 0 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 0 V~, + 0% / - 0% Rated frequency: 0 Hz/0 Hz ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-0 W/VA (non-led loads). Protection class (Device): IP 0 Temperature range (Device): 0 C to C IEC 0--, British Standard E 0-- U /0 Article-o. Order-o. Busch-touch dimmer ) ) ) ) ) ) ) Flush-mounted, LED, -00 W Touch dimmer. -wire connection (neutral conductor not required) eutral conductor optionally connectable (recommended for the connection of low loads < 0 W/VA). Optimised for dimming of retrofit LED lamps (LEDi). For incandescent lamps, 0V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energysaving lamps. Mix operaton of LEDi with conventional loads possible. With adjustable minimum brightness. The minimum brightness for the leading edge control can be adjusted using the potentiometer. The potentiometer at the left limit stop corresponds with the trailing edge control mode. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With light-level memory and minimum brightness memory. Operation also possible via conventional push buttons (00 US, 0/ UK). Without control cover. For control cover with control lamp -xxx-0x. For Busch-Remote control IR control cover 0-xxx-0x. For comfort timer control element For Busch-Watchdog Presence tech -xxx-0 und /-xxx. ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-00 W/VA (non-led loads). Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): 0 C to C IEC 0--, British Standard E 0-- ) ) ) ) ) ) Illuminable with neon lamp. eon lamp included in delivery with cover plate. In the case of conventional transformers, take ~0% transformer loss into account. In case of electronic transformers, % transformer losses. Also applicable for gang way installations. Provided with terminal for net disconnection devices. Only in conjunction with standard flush-mounting boxes according to DI 0, Part, erect or Busch-Jaeger o. 0 wallbox stonework, 00 wallbox cavity wall or 00 wallbox concrete) ) Recommendation: Please use loads and types of one producer. ) A list of recommended retrofit lamps (LEDi) is available at busch-dimmer-tool. U /0 ) ) ) ) Illuminable with neon lamp. eon lamp included in delivery with cover plate. In the case of conventional transformers, take ~0% transformer loss into account. In case of electronic transformers, % transformer losses. Only in conjunction with standard flush-mounting boxes according to DI 0, Part, erect or Busch-Jaeger o. 0 wallbox stonework, 00 wallbox cavity wall or 00 wallbox concrete) ) Recommendation: Please use loads and types of one producer. ) A list of recommended retrofit lamps (LEDi) is available at busch-dimmer-tool. ) In connection with 0-x-0 and 00-xx- (M) only suitable for switching retrofit LEDs (for -conductor connection). Technical information Innovations 0

16 MDRC dimmer, conventional Article-o. Order-o. Busch-Universal master dimmer ) ) ) ) ) ) LED-Dimmer Touch dimmer with local operation. Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 0V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energysaving lamps. Mix operaton of LEDi with conventional loads possible. With the following functions: memory, snooze, wake-up, children's room, central off, cleaning light and time function. For staircase lighting control with automatic switch-off and warning function according to DI 0-. Supports the adherence to the energy saving ordinance (EnEV ). Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum/maximum brightness. With light value storage. Operation also possible via conventional push buttons (00 US, 0/ UK). Extension unit input for short switching pulses (push-button) and continuous contact (switch/timer). Extension unit input designed as wide voltage input (-0 V; AC/DC); galvanic isolation. ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-00 W/VA (non-led loads). Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Temperature range (Device): 0 C to C Module width: MW IEC 0--, British Standard E ) ) ) ) ) ) /0 Illumination of the push switch is only possible with -conductor terminal. In case of electronic transformers, % transformer losses. In the case of conventional transformers, take ~0% transformer loss into account. MW = mm. Recommendation: Please use loads and types of one producer. A list of recommended retrofit lamps (LEDi) is available at busch-dimmer-tool. Article-o. Busch-Dimmer ) ) ) ) ) ) ) ) MDRC, LED, -00 W For operation via external push-buttons. Optimized for dimming of Philips retrofit LEDs (LEDi). For incandescent lamps, 0V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energysaving lamps. Mix operaton of LEDi with conventional loads possible. With adjustable minimum brightness. The minimum brightness for the leading edge control can be adjusted using the potentiometer. The potentiometer at the left limit stop corresponds with the trailing edge control mode. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With light-level memory and minimum brightness memory. Operation only possible via conventional push button (00 US/0/ UK). Without control cover. ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-00 W/VA (non-led loads). Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): 0 C to C Module width: MW IEC 0--, British Standard E ) ) ) ) ) ) ) ) -0-0 /0 In the case of conventional transformers, take ~0% transformer loss into account. In case of electronic transformers, % transformer losses. MW = mm. For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. Please check specification of transformer producers. Recommendation: Please use loads and types of one producer. A list of recommended Philips retrofit lamps LEDi is available at Busch-rotary dimmer ) ) ) ) ) ) ) ) MDRC, LED, -00 W With rotary control, two-way switch and soft-catch. Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 0 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Rated voltage: 0 V~, + 0% / - 0% Rated frequency: 0 Hz/0 Hz ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-0 W/VA (non-led loads). Protection class (Device): IP 0 Temperature range (Device): 0 C to C Module width: MW IEC 0--, British Standard E ) ) ) ) ) ) ) ) Innovations 0 Order-o Illuminable with neon lamp. eon lamp included in delivery with cover plate. In the case of conventional transformers, take ~0% transformer loss into account. In case of electronic transformers, % transformer losses. Also applicable for gang way installations. Provided with terminal for net disconnection devices. MW = mm. Recommendation: Please use loads and types of one producer. A list of recommended retrofit lamps (LEDi) is available at busch-dimmer-tool.

17 Busch-CO sensor Article-o. Order-o. Busch-CO sensor ) For controlling the incoming fresh air in rooms by means of opening or switching of windows/fans. With display for carbon dioxide, humidity, temperature and air pressure. Setting values: carbon dioxide 00 ppm - 00 ppm, humidity 0% - 0%. With zero-potential relay contacts. ominal voltage: 0 V~ ominal current: A cos φ = Without claw fixation. To fit cover plate -xxx. 0 U /0 ) Only in conjunction with standard flush-mounting boxes according to DI 0, Part, erect or Busch-Jaeger o. 0 wallbox stonework, 00 wallbox cavity wall or 00 wallbox concrete) future linear anthracite aluminium silver ), matt ) black matt ) solo chalet-white Busch-axcent carat pure stainless steel ) grey metallic ) yellow white /00 anthracite alpine white Reflex SI /00 stainless steel Busch-Duro 000 SI Order-o. Cover plate For comfort timer control element For standard timer control element -0. For room thermostats 0 U-0 and 0 UF-0. For short-time timer U-0. For Busch-CO sensor 0 U Cover plate For comfort timer control element For standard timer control element -0. For room thermostats 0 U-0 and 0 UF-0. For short-time timer U-0. For Busch-CO sensor 0 U-00. Article-o. ) Surface painted. Cover plate For comfort timer control element For standard timer control element -0. For room thermostats 0 U-0 and 0 UF-0. For short-time timer U-0. For Busch-CO sensor 0 U-00. alpha 0 platinum ) bronze ) G ivory matt G 0 palladium ) titanium ) ivory alpine white champagne metallic ), matt ) black matt ) blackberry ) aluminium silver ) G - -G / impuls /0 0 ) Surface painted. Technical information Innovations 0

18 ZigBee Light Link wall-mounted transmitter anthracite aluminium silver ), matt ) black matt ) Article-o. Order-o. grey metallic ) yellow future linear /0- /0- /0- / /0 /0- / anthracite aluminium silver ), matt ) black matt ) /0- /0- /0-0 /0- /0- /0- /0- /0- /0- /0- ) Surface painted. Innovations 0 /0- /0- /0- / /0 /0- / / / / solo /0 0 grey metallic ) yellow /0- /0- /0-0 /0- Busch-axcent /0 chalet-white /0- /0- carat /0 anthracite pure stainless steel ) stainless steel future linear carat anthracite ZigBee Light Link wall-mounted transmitter -channel gang wall-mounted transmitter independent of mains power supply. For the wireless remote control of other ZigBee Light Link radio components. For saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Power supply: lithium button cell battery type CR0 (included in scope of delivery) Battery service life: typically years. Automatic monitoring of battery life. Including fixing plate for mounting on smooth walls or on switch boxes. Rated voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Busch-axcent chalet-white Order-o. ZigBee Light Link wall-mounted transmitter -channel gang wall-mounted transmitter independent of mains power supply. For the wireless remote control of other ZigBee Light Link radio components. For saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Power supply: lithium button cell battery type CR0 (included in scope of delivery) Battery service life: typically years. Automatic monitoring of battery life. Including fixing plate for mounting on smooth walls or on switch boxes. Rated voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm solo 0 Article-o. /0- /0- /0- pure stainless steel ) stainless steel ) Surface painted. /0-

19 ZigBee Light Link control elements ZigBee Light Link wall-mounted transmitter anthracite aluminium silver ), matt ) black matt ) Article-o. Order-o. grey metallic ) yellow future linear /0- /0- /0- / /0 /0- / anthracite aluminium silver ), matt ) black matt ) /0- /0- /0-0 /0- /0- /0- /0- /0- /0- /0- ) Surface painted. Technical information / / / / solo /0 0 grey metallic ) yellow Busch-axcent /0 chalet-white - - carat /0 anthracite pure stainless steel ) stainless steel future linear carat anthracite ZigBee Light Link control element gang For wireless switching and dimming of electrical loads. For ZigBee Light Link flush-mounted inserts 0 U, U and U. In connection with ZigBee Light Link flush-mounted inserts U and U, the non-zll lamps and other loads connected to the flush-mounted insert are switched or dimmed directly with the top rocker. For the and the remaining buttons can be used for storing and calling up of individual light scenes. In connection with ZigBee Light Link flush-mounted insert 0 U for saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. Push-button function: Switching/dimming/light scenes. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Busch-axcent chalet-white Order-o. ZigBee Light Link wall-mounted transmitter -channel gang wall-mounted transmitter independent of mains power supply. For the wireless remote control of other ZigBee Light Link radio components. For saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Power supply: lithium button cell battery type CR0 (included in scope of delivery) Battery service life: typically years. Automatic monitoring of battery life. Including fixing plate for mounting on smooth walls or on switch boxes. Rated voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm solo 0 Article-o pure stainless steel ) stainless steel - ) Surface painted. Innovations 0

20 ZigBee Light Link control elements anthracite aluminium silver ), matt ) black matt ) Article-o. Order-o. grey metallic ) yellow future linear future linear / anthracite aluminium silver ), matt ) black matt ) /0 0 grey metallic ) yellow / / / / Busch-axcent /0 chalet-white - - carat /0 anthracite pure stainless steel ) ) Surface painted. stainless steel ) Surface painted. 0 Innovations solo carat anthracite ZigBee Light Link control element gang For wireless switching and dimming of electrical loads. For ZigBee Light Link flush-mounted inserts 0 U, U and U. In connection with ZigBee Light Link flush-mounted inserts U and U, the non-zll lamps and other loads connected to the flush-mounted insert are switched or dimmed directly with the top rocker. For the and the remaining buttons can be used for storing and calling up of individual light scenes. In connection with ZigBee Light Link flush-mounted insert 0 U for saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Busch-axcent chalet-white Order-o. ZigBee Light Link control element gang For wireless switching and dimming of electrical loads. For ZigBee Light Link flush-mounted inserts 0 U, U and U. In connection with ZigBee Light Link flush-mounted inserts U and U, the non-zll lamps and other loads connected to the flush-mounted insert are switched or dimmed directly with the top rocker. For the and the remaining buttons can be used for storing and calling up of individual light scenes. In connection with ZigBee Light Link flush-mounted insert 0 U for saving and calling up light scenes. For combining with/integrating in other systems which operate with the ZigBee Light Link protocol, such as Philips hue. With labelling field. Without enclosed labelling sheet. Compatible lettering software is available at www. BUSCH-JAEGER-Beschriftungstool.de. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm solo 0 Article-o. -

21 ZigBee Light Link flush-mounted inserts/ adaptor plug Article-o. Order-o. ZigBee Light Link power supply insert ) For the power supply of ZigBee Light Link control elements. With electronic short-circuit protection. With electronic overload protection. For ZigBee Light Link control element -xxx, -xxx and -xxx. Without control cover. Rated voltage: 0 V~, +0 % / -0 % Secondary: V-, + % / - % Rated frequency: 0 Hz - 0 Hz Rated current: 0 ma Protection class (Device): IP 0 Temperature range (Device): - C to C Mounting depth: mm IEC 0--, British Standard E U /0 ) To be mounted only in connection with commercially available flush-mounted installation boxes according to DI 0 > 0 mm depth gauge or Busch-Jaeger art. no. 0, 00 or 00. U /0 U-00 ) ) ) ) /0 In case of electronic transformers, % transformer losses. In the case of conventional transformers, take ~0% transformer loss into account. For further information please check the current Online-Catalogue. To be mounted only in connection with commercially available flush-mounted installation boxes according to DI 0 > 0 mm depth gauge or Busch-Jaeger art. no. 0, 00 or 00. Adaptor plug, ZigBee Light Link switch For switching of electrical loads via radio control. Plug device for switching electric loads up to,0 W/VA. Control of thermal positioners for heating control possible. ot for electrical heating devices. Connected load can be activated/deactivated via micro switch. Send/receive frequency:. GHz. Free-field range: approx. 00 m. Rated voltage: 0 V~, + 0% / - 0% Outputs: (normally open contact), potential-bound. Output voltage: 0 V~. ominal current: AX ominal power:,0 W/VA (non-led loads). ominal power: 00 W/VA (non-led loads). Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm ) To be mounted only in connection with commercially available flush-mounted installation boxes according to DI 0 > 0 mm depth gauge or Busch-Jaeger art. no. 0, 00 or 00. Technical information Order-o. ZigBee Light Link LED-dimmer insert ) ) ) ) For switching and dimming electric loads via radio control. Touch dimmer. For wireless switching and dimming of electrical loads. wire connection (neutral conductor required). Optimised for dimming of retrofit LED lamps (LEDi). For incandescent lamps, 0V tungsten halogen lamps and low-voltage halogen lamps with conventional transformers or electronic transformers and dimmable halogen energysaving lamps. Mix operaton of LEDi with conventional loads possible. With adjustable minimum brightness. The minimum brightness for the leading edge control can be adjusted using the potentiometer. The potentiometer at the left limit stop corresponds with the trailing edge control mode. Low-noise level by MOSFET transistors. Short-circuit-proof and overload-protected (electronic fuse). With light-level memory and minimum brightness memory. Without control cover. For ZigBee Light Link control element -xxx, -xxx and -xxx. ominal power: - 00 W/VA (retrofit LED loads). ominal power: 0-00 W/VA (non-led loads). Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Protection class (Device): IP 0 Temperature range (Device): 0 C to C Mounting depth: mm IEC 0--, British Standard E 0-- ZigBee Light Link universal relay insert ) For switching of electrical loads via radio control. wire connection (neutral conductor required). For switching retrofit LED lamps (LEDi). For switching incandescent lamps, 0 V tungsten halogen lamps, fluorescent lamps and low-voltage halogen lamps, that are actuated via transformers. Without control cover. For ZigBee Light Link control element -xxx, -xxx and -xxx. Rated voltage: 0 V~, +0 % / -0 % Rated frequency: 0 Hz - 0 Hz Polling voltage: 0 V~, Outputs: x ormally open contact, potential-bound Suitable for: ohmic, capacitive and inductive loads Rated current: 0 AX Rated power: 00 W/VA Suitable for: LEDi and energy-saving bulbs; typical Rated power: 00 VA Protection class (Device): IP 0 Temperature range (Device): - C to C Mounting depth: mm IEC 0--, British Standard E 0-- Article-o Innovations 0

22 MDRC actuators Article-o. Order-o. Panel," ) ) ) For the central control of up to configurable ABB-free@home functions. For the display of configurable system messages. A configurable primary function can be triggered with a multi-touch gesture. Capacitive touch screen with closed glass surface. With integrated room temperature controller and temperature sensor. In connection with temperature sensor /T the integrated room temperature controller can be fitted with a remote sensor. Suitable as room temperature controller extension unit (up to ). Requires additional power supply VDC; e.g. -0 Display size: 0. cm (.'') Display resolution: 0 x Mounting height: mm Control element: freely programmable touch surfaces Display elements: LCD display Bus voltage: VProtection class (Device): IP 0 Temperature range (Device): - C to 0 C Dimensions: (L x W x D): mm x mm x mm white black DP-- DP Flush-mounted installation box ) for ABB-free@home For flush-mounted und hollow-wall installation of the ABB-free@homeTouch." -XX. Windproof. Installation dimensions (H x W x D): mm x mm x 0 mm Installation depth: 0 mm Mounting depth: 0 mm ) Halogen free. Weather station ) for ABB-free@home For recording and transmitting of brightness, temperature, wind speed and rain. Weather data can be linked with actuators to automatically control functions. Weather data can be visualized in the free@home web interface and the free@home app. Wind speed measuring range - 0 m/s The bus can be connected via enclosed terminal block. Bus voltage: VRated voltage: 0-0 V~ Rated frequency: 0 Hz - 0 Hz Inputs: Brightness limit value: Lux Lux Protection class (Device): IP Temperature range (Device): -0 C to C Dimensions: (L x W x D): 0 mm x mm x mm WS ) For software and description please check the current Online-Catalogue. Temperature sensor For use as remote sensor. Line type: H0 VV-F Cable length: m Type: TC 0 kohm /T Innovations Article-o. Order-o. Fan coil actuator, MDRC ) ) ) for ABB-free@home For controlling blower convectors. Supports -pipe and -pipe system for heating and cooling. The fan speed levels can be switched using a changeover or step switch function. Three contacts for switching a three-stage fan. Two contacts for activating the heating and cooling valves. Supports V and 0V valves. With two binary inputs for connecting dewpoint and condensation contacts. The scanning voltage is provided by the device. The bus connection is provided via the enclosed bus terminal. Bus voltage: V Inputs: Polling voltage: 0 V-, Outputs: x ormally open contact, potential free Suitable for: AC Rated current: A Output voltage: 0 V~ Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): 0 mm x 0 mm x. mm Module width: MW ) o additional commissioning software is required. ) Programming only with bus voltage applied via the web interface of the System Access Point. ) Additional information about commissioning and operation is contained in the system manual and the DP-F FCA-M-.. CDG000R00 ) o additional commissioning software is required. ) Programming only with bus voltage applied via the web interface of the System Access Point. ) Additional information about commissioning and operation is contained in the system manual and the

23 ABB-Welcome Access control Covers Article-o. Order-o. Cover plate For fan coil controller As cover for KX room temperature controller (0/). CP-FCC Reflex SI alpine white CP-FCC- matt 00/0--00 future linear anthracite aluminium silver CP-FCC- CP-FCC- CP-FCC- CP-FCC CP-FCC- CP-FCC CP-FCC carat anthracite CP-FCC- CP-FCC- CP-FCC- pure stainless steel ) stainless steel CP-FCC Outdoor station with keypad module ) front plate steel, surface is coated white Front plate made of mm steel. Enables the opening of the door using a numerical code. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. users can be taught in. Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Programming directly on the module or using a web browser (requires IP gateway ). Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm Busch-axcent ) Additional information about commissioning and operation is contained in the system manual and the solo Order-o. Outdoor station with fingerprint module ) front plate steel, surface is coated white Front plate made of mm steel. Enables the opening of the door using a fingerprint scanner. users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm Busch-Duro 000 SI white Article-o. matt 00/ ) Additional information about commissioning and operation is contained in the system manual and the Outdoor station with transponder module ) front plate steel, surface is coated white Front plate made of mm steel. Enables the opening of the door using a key card (contactless). users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm ) Surface painted. matt 00/ ) Additional information about commissioning and operation is contained in the system manual and the Outdoor station with fingerprint module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Enables the opening of the door using a fingerprint scanner. users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm 0 stainless steel 00/ ) Additional information about commissioning and operation is contained in the system manual and the Technical information Innovations 0

24 ABB-Welcome Access control Article-o. Order-o. Outdoor station with keypad module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Enables the opening of the door using a numerical code. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. users can be taught in. Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Programming directly on the module or using a web browser (requires IP gateway ). Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm 0 stainless steel 00/ ) Additional information about commissioning and operation is contained in the system manual and the 0 stainless steel 0 stainless steel 00/ stainless steel / /0/ ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station gang with fingerprint module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a fingerprint scanner. users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station with keypad module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Hands-free device backlit. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a numerical code. users can be taught in. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Order-o. Outdoor video station gang with fingerprint module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Setting angle horizontal/vertical: +/-, mechanically adjustable Vertical/horizontal detection angle: / Enables the opening of the door using a fingerprint scanner. users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Outdoor station with transponder module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Enables the opening of the door using a key card (contactless). users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Mounting tool is enclosed. For flush-mounted installation with 00 U--00. For surface-mounted installation with 00 AP--00. Consumer units: Protection class (Device): IP Dimensions: (L x W x D): mm x mm x mm Article-o. 0 stainless steel /0/ ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station gang with fingerprint module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a fingerprint scanner. users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm ) Additional information about commissioning and operation is contained in the system manual and the 0 stainless steel /0/ ) Additional information about commissioning and operation is contained in the system manual and the Innovations 0

25 ABB-Welcome Access control Article-o. Order-o. Outdoor video station gang with keypad module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a numerical code. users can be taught in. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel // ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station gang with keypad module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a numerical code. users can be taught in. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel // stainless steel // Order-o. Outdoor video station gang with transponder module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a key card (contactless). users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel // ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station gang with transponder module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a key card (contactless). users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel // ) Additional information about commissioning and operation is contained in the system manual and the ) Additional information about commissioning and operation is contained in the system manual and the Outdoor video station gang with keypad module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a numerical code. users can be taught in. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Article-o. Outdoor video station gang with transponder module ) front plate stainless steel, surface is brushed Front plate made of mm stainless steel. Video camera with automatic day/night switchover and infrared LEDs to illuminate the night shots. Communication unit and key module are backlit. Stamped labelling foil is enclosed. Mounting tool is enclosed. For flush-mounted installation with 0 U--00. For surface-mounted installation with 0 AP--00. Vertical/horizontal detection angle: / Setting angle horizontal/vertical: +/-, mechanically adjustable Enables the opening of the door using a key card (contactless). users can be taught in. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: 0 Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel // ) Additional information about commissioning and operation is contained in the system manual and the ) Additional information about commissioning and operation is contained in the system manual and the Technical information Innovations 0

26 ABB-Welcome System Devices Article-o. Order-o. ABB-Welcome Accessories IP gateway ) Allows the integration of tablet or smartphone with installed Welcome app as mobile indoor load for audio and video communication. Makes possible the use of the Busch-ComfortTouch as indoor door communication. For integration into the mybusch-jaeger portal. Configuration interface for telephone gateway and access control module. Ethernet connection (RJ ). Consumer units: Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): 0 mm x 0 mm x mm Module width: 0 MW anthracite light grey U U Innovations 0 Available from October Surface-mounted installation box, size / ) For surface-mounted installation of ABB-Welcome outdoor station. Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm anthracite light grey 00 AP AP ) Additional information about commissioning and operation is contained in the system manual and the Key card Key card for the ABB-Welcome transponder module Dimensions: (L x W x D): mm x mm Table stand on-slip table foot for the Welcome Touch or the free@ hometouch ". Permits the use of a Welcome Touch or a free@hometouch " as tabletop unit. Dimensions: (L x W x D): 0 mm x 0 mm x 0 mm ) Additional information about commissioning and operation is contained in the manual for the Mini system controller in the Online-Catalogue. Camera interface Zur Einbindung von bis zu vier analogen Kameras in eine Welcome-Anlage. Ermöglicht die Zuordnung der Kameras an eine Welcome Außenstation (Video/Audio) oder an eine Welcome Video Innenstation. In eine Welcome-Anlage können bis zu vier Kamera-Interface Geräte zusammengeschaltet werden. In a Welcome system, up to analogue cameras can be integrated. Programming directly via rotary switch on the camera interface. Video signal input Vss, FBAS/CVBS, on ohm (PAL/ TSC) Consumer units: Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): m x mm x m ) Additional information about commissioning and operation is contained in the system manual and the ) Additional information about commissioning and operation is contained in the system manual and the 0-00 Flush-mounted installation box, size / ) For flush-mounted installation of ABB-Welcome outdoor station. Installation dimensions (H x W x D): 0 mm x 0 mm x 0 mm Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm System controller, mini ) Supply device and controller of the ABB-Welcome system. For connecting the indoor and outdoor busline. Zum Anschluss eines elektrischen Türöffners ( V~, 0, A oder potentialfreier Ausgang 0 V, A). With output to control hall light directly or via relais (0V, A). Switching time duration of the door opener and the light is adjustable. For up to consumer units. Rated voltage: 0 V~, +0 % / -0 % Output voltage: V Rated frequency: 0 Hz - 0 Hz Rated power:. W Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): 0 mm x 0 mm x mm Module width: MW Order-o. Article-o Available from June

27 ABB-Welcome Spare Parts Article-o. Order-o. Fingerprint module ) Access control module for use in ABB-Welcome door communication systems or standalone operation. Enables the opening of the door using a fingerprint scanner. users can be taught in. For installing into an ABB-Welcome outdoor station. For the integration into letter boxes and bell systems of different manufacturers, such as the products of Erwin Renz Metallwarenfabrik GmbH & Co KG, Boschstr., Kirchberg/Murr, Germany. The cutout must be created by the manufacturer. Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0 stainless steel matt Keypad module ) Access control module for use in ABB-Welcome door communication systems or standalone operation. Enables the opening of the door using a numerical code. The keypad can also be used for the direct selection of the ABB-Welcome indoor stations. users can be taught in. For installing into an ABB-Welcome outdoor station. For the integration into letter boxes and bell systems of different manufacturers, such as the products of Erwin Renz Metallwarenfabrik GmbH & Co KG, Boschstr., Kirchberg/Murr, Germany. The cutout must be created by the manufacturer. Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Article-o. Order-o. Status module spare part Consumer units: Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0-00 Available from October Info module spare part Consumer units: Stamped labelling foil is enclosed. Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm ) Additional information about commissioning and operation is contained in the system manual and the 0 stainless steel matt Available from October Dummy module spare part Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm -00 Available from October ) Additional information about commissioning and operation is contained in the system manual and the Transponder module ) Access control module for use in ABB-Welcome door communication systems or standalone operation. Enables the opening of the door using a key card (contactless). users can be taught in. For installing into an ABB-Welcome outdoor station. For the integration into letter boxes and bell systems of different manufacturers, such as the products of Erwin Renz Metallwarenfabrik GmbH & Co KG, Boschstr., Kirchberg/Murr, Germany. The cutout must be created by the manufacturer. Standalone operation together with system controller 00 (power supply and connection for the electrical door opener. Programming directly on the module or using a web browser (requires IP gateway ). Consumer units: Protection class (Device): IP Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm black --00 matt ) Additional information about commissioning and operation is contained in the system manual and the Technical information Innovations 0

28 ABB i-bus KX Visualisation Article-o. Order-o. ABB i-bus KX Busch-priOn control elements Busch-ControlTouch house control, Infotainment, Entertainment Freely programmable IP-/KX gateway as multi-room app control for the KX system. MDRC devices with associated IOS and Android apps. Easy control using intuitive navigation concept. Representation of individual operating pages with list view. Complete web-based commissioning. Home automation, switching, dimming, blind, RTC control, scene/sequences, timing, Philips Hue. Entertainment: multimedia integration via UPnP. Infotainment: monitoring of usage data for up to years. Safety: video surveillance with IP cameras, message function via push messages or . Time programs and scenes can be created by the end customer. Access via KXnet/IP tunnelling. Script editor for logic functions. Compatible with ABB i-bus KX Control with smartphones and tablets via the ControlTouch app (Apple ios /Google Android). External power supply: - VDC (SELV). Control element: freely programmable touch surfaces Bus voltage: VRated voltage: - VProtection class (Device): IP 0 Temperature range (Device): 0 C to 0 C Dimensions: (L x W x D): 0 mm x mm x 0 mm Module width: MW Position for installation: Horizontal /APP-00 Innovations Article-o. Order-o. Top end strip with display, RTC, IR receiver and proximity sensor ) ) ) Busch-priOn Top end strip for installation on gang to gang support frame (/0-0, /-0 und /-0). With integrated IR receiver for control using the Busch remote control 00- or /... and integrated proximity function. For heating and cooling (PI, PWM or -point). For control of up to -level ventilation actuators. With manual adjustment of fan levels. Master/slave configuration. With base-load operation. Display of up to functions as text and/or icon. Only in connection with -gang rotary control element (-xxx-0) and -gang control element (-xxx-0) possible. Incl. 0 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Class of temperature controller Contribution to space heating energy efficiency,0%. Detection range: frontal: 0. m, lateral: 0. m Detection angle: 00 Mounting height:. m Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D):. mm x 0. mm x. mm glass black / ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher ) Additional Power-Tool software necessary.

29 ABB i-bus KX Busch-triton control elements ABB i-bus KX solo control element Article-o. Order-o. Busch-Watchdog sensor 0 FM standard, select ) ) ) with integrated bus coupler Movement detector with up to channels. The bus can be connected via enclosed terminal block. With integrated KX bus coupler. Control element: Setting via ETS application. Detection range: frontal: m, lateral: m Detection angle: 0 Brightness limit value: Lux - 00 Lux Mounting height:. m Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x 0 mm Position for installation: vertical Available from June 0 / Reflex SI alpine white Available from June 0 / future linear anthracite ) aluminium silver ), matt ) black matt ) Available from June 0 / / / / /0--00 / Order-o. Control element, /gang, with IR interface and RTC ) ) Busch-triton With integrated KX bus coupler. With labelling field. Rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function). Master/slave configuration. With base-load operation. Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. The controller is a constant room temperature controller for ventilator convectors (fan coils) in -pipe and -pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. To control up to IR channels (RC) using Busch-Remote control IR mobile remote control 00- or 00.../0.... Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: rocker switch left/right Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light. Connections: KX-line: Bus connection terminal Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x 0 mm Busch-Duro 000 SI white Article-o. alpha 0 platinum ) G 0 palladium ) /-0-00 /-G-00 / solo 0 grey metallic ) yellow Available from June 0 / / / / impuls ) champagne metallic / aluminium silver future linear / Busch-axcent chalet-white Available from June 0 / / carat anthracite ) Available from June 0 / / / ) As required, you can find the programmable functions in the current application description, which you can download in the Support Centre on our Internet page. ) For compatible lettering software, visit ) Surface painted. pure stainless steel ) stainless steel Available from June 0 / ) For software and description please check the current Online-Catalogue. ) For compatible cover frames, see the following ranges: carat, pure stainless steel, solo, Busch-axcent or future linear. ) ETS programming only with ETS.0f or higher ) Surface painted. Technical information Innovations 0

30 ABB i-bus KX Busch-triton control elements Article-o. Order-o. ABB i-bus KX Fan coil controller Control element, /0gang, with IR interface and RTC ) ) Busch-triton With integrated KX bus coupler. With labelling field. Rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function). Master/slave configuration. With base-load operation. Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. The controller is a constant room temperature controller for ventilator convectors (fan coils) in -pipe and -pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. To control up to IR channels (RC) using Busch-Remote control IR mobile remote control 00- or 00.../0.... Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: rocker switch left/right Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light. Connections: KX-line: Bus connection terminal Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x 0 mm /-0-00 /-G-00 / impuls ) champagne metallic /--00 /--00 future linear anthracite aluminium silver ), matt ) black matt ) /--00 /--00 /--00 / /0 /--00 / / / /0-0-0 solo future linear ) aluminium silver Order-o. Control element, /gang, with RTC ) ) ) ) multi-function/colour concept With labelling field. For ABB i-bus KX bus coupler 0/-0, 0/. Support of KX functions through innovative colour concept (yellow=lighting, blue=blind, orange=rtc, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. Rocker switch left/right (switching/dimming/blind/value sender/light scenes/fan function). Master/slave configuration. With base-load operation. The controller is a constant room temperature controller for ventilator convectors (fan coils) in -pipe and -pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. Transparent labelling sheet with standard symbols included in delivery. Incl. 0 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: Switch contacts left/right, also for selecting setpoint and mode of operation. Display elements: LCD showing operation mode and temperature. Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm alpha 0 platinum ) G 0 palladium ) Article-o ) As required, you can find the programmable functions in the current application description, which you can download in the Support Centre on our Internet page. ) For compatible lettering software, visit ) Surface painted. 0 grey metallic ) yellow /--00 /--00 /-0-00 /--00 Busch-axcent chalet-white /--00 /--00 carat anthracite /--00 /--00 /--00 pure stainless steel ) stainless steel ) ) ) ) ) 0 Innovations 0 /--00 For software and description please check the current Online-Catalogue. ETS programming only with ETS.0f or higher For compatible lettering software, visit Additional Power-Tool software necessary. Surface painted.

31 ABB i-bus KX Room temperature controllers Order-o. Article-o. Push-button coupler gang ) ) with integrated bus coupler For contacting gang rocker 0-0-xxx, -0-xxx, -0-xxx, -0-xxx und -0-xxx. With integrated temperature sensor. Support of KX functions through innovative colour concept (yellow=lighting, blue=blind, orange=rtc, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. With middle position. The bus can be connected via enclosed terminal block. Control element: Switch contacts top/bottom Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light. Connections: KX-line: Bus connection terminal Rated voltage: V-, + V / - V Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm 0/0-00 Available from June ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher Technical information Article-o. Order-o. Push-button coupler gang for ocean ) ) ) with integrated bus coupler For contacting conventional gang rocker switches. With middle position. For inserting in the ocean surface-mounted housing. Enclosed mounting plate for the following ranges: Busch-Duro 000 SI/SI Linear, Reflex SI/SI Linear, future linear, alpha, solo, Busch-axcent, carat, pure stainless steel and ocean. The bus can be connected via enclosed terminal block. Display elements: Integrated two-colour status LED (red, green, off) Connections: KX-line: Bus connection terminal Rated voltage: V, + V / - V Inputs: Polling voltage: V, is provided by the device Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Available from June 0 0/0-AP ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher ) ot for Allwetter. Push-button coupler gang ) ) with integrated bus coupler For contacting gang rocker 0-x-xxx, -x-xxx, -x-xxx, -x-xxx and -x-xxx. With integrated temperature sensor. Support of KX functions through innovative colour concept (yellow=lighting, blue=blind, orange=rtc, magenta=scene and white=neutral/no function assigned) or standard illumination red/green. With middle position. The bus can be connected via enclosed terminal block. Control element: Switch contacts top/bottom Display elements: Two LED per rocker via separate communication object for status (Red/ Green/ OFF) or orientation light. Connections: KX-line: Bus connection terminal Rated voltage: V-, + V / - V Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Available from June 0 0/ Push-button coupler gang for ocean ) ) ) with integrated bus coupler For contacting conventional gang rocker switches. With middle position. For inserting in the ocean surface-mounted housing. Enclosed mounting plate for the following ranges: Busch-Duro 000 SI/SI Linear, Reflex SI/SI Linear, future linear, alpha, solo, Busch-axcent, carat, pure stainless steel and ocean. The bus can be connected via enclosed terminal block. Connections: KX-line: Bus connection terminal Rated voltage: V, + V / - V Inputs: Polling voltage: V, is provided by the device Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Available from June 0 0/0-AP ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher ) ot for Allwetter. Innovations 0

32 ABB i-bus KX Room temperature controllers Article-o. Order-o. Flush-mounted room thermostat ) ) Heating/cooling operation Room thermostat without "local operation" incl. insert for centre plate for cooling element. For controlling commercially available valve drives. Can only be used with a cover plate -xxx or -xxx, with the exception of and -. For control of up to -level ventilation actuators. Master/slave configuration. With base-load operation. The bus can be connected via enclosed terminal block. Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: one Connections: KX-line: Bus connection terminal Rated voltage: V Rated current: ma Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): 0 mm x mm x mm 0/ ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher Room thermostat with display ) ) Heating/cooling operation Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. For controlling commercially available valve drives. For contacting cover plate -xxx. With display of set-value temperature. Master/slave configuration. With base-load operation. The bus can be connected via enclosed terminal block. Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: Switch contacts Display elements: LCD showing operation mode and temperature. Connections: KX-line: Bus connection terminal Rated voltage: V Rated current: ma Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): 0 mm x mm x mm 0/-00 Available from June ) For software and description please check the current Online-Catalogue. ) ETS programming only with ETS.0f or higher Article-o. Order-o. Room temperature controller with gang universal input ) Heating/cooling operation Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. With universal input with: - max. of binary inputs - binary inputs and analogue input for activating sensors with external power supply -0 V/0-0 V - binary inputs and analogue input for activating sensors with external power supply -0 V/0-0 V and an external temperature sensor PT000 / T. With display of set-value temperature. Master/slave configuration. With base-load operation. The bus can be connected via enclosed terminal block. Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: Switch contacts Display elements: LCD showing operation mode and temperature. Connections: KX-line: Bus connection terminal Rated voltage: V Outputs: x electronic output, potential free Rated current: ma Control/Signal outputs:, 0-0 V (passive) Protection class (Device): IP 0 Temperature range (Device): - C to C 0/ Available from October /0 ) For software and description please check the current Online-Catalogue. Room temperature controller with CO/moisture sensor ) Heating/cooling operation Control element with room temperature controller function and CO/moisture/air pressure sensor. For activating heating, ventilation and fan coil actuators. With universal input with: - max. of binary inputs - binary inputs and analogue input for activating sensors with external power supply -0 V/0-0 V - binary inputs and analogue input for activating sensors with external power supply -0 V/0-0 V and an external temperature sensor PT000 / T. With display of set-value temperature. Master/slave configuration. With base-load operation. The bus can be connected via enclosed terminal block. Class of temperature controller Contribution to space heating energy efficiency,0%. Control element: Switch contacts Display elements: LCD showing operation mode and temperature. Connections: KX-line: Bus connection terminal Rated voltage: V Outputs: x electronic output, potential free Rated current: ma Control/Signal outputs:, 0-0 V (passive) Protection class (Device): IP 0 Temperature range (Device): - C to C 0/-00 Available from October ) For software and description please check the current Online-Catalogue. Innovations 0

33 ABB i-bus KX Built-in LED-dimmers ABB i-bus KX Room temperature controllers Order-o. Article-o. Cover plate for room temperature controller or room temperature controller with CO /moisture As cover for room temperature controller with/without CO/moisture sensor (0/ and 0/). Busch-Duro 000 SI white 0/0- Available from October Available from October Available from October Available from October Available from October Reflex SI alpine white 0/0- alpha 0 platinum bronze G ivory matt G 0 palladium titanium 0/0-0 0/0-0/0-G 0/0-0/0-G 0/0-0 0/0- future linear anthracite ivory aluminium silver matt black matt 0/0-0/0-0/0-0/0-0/0-0/0- solo 0 ivory grey metallic yellow 0/0-0/0-0/0-0 0/0- Article-o. chalet-white LED-Dimmer with constant curve -gang Build-in LED-Dimmer for LED strips with constant curve. To control RGB or RGBW-LEDs. Grouping of channels possible. With Master/Slave-function. Connections: KX-line: Bus connection terminal Rated voltage: - VOutput voltage: VSecondary: VRated frequency: 00 Hz Outputs: x dimming channel Suitable for: DC Rated current: 0 A Rated power: 0 W Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm /0-00 Available from October LED-Dimmer with constant curve, with power supply. -gang Build-in LED-Dimmer for LED strips with constant curve. To control RGB or RGBW-LEDs. With integrated power adapter. Grouping of channels possible. With Master/Slave-function. Connections: KX-line: Bus connection terminal Rated voltage: 0 V~ Output voltage: V~ Rated frequency: 00 Hz Outputs: x dimming channel Suitable for: DC Rated current: A Rated power: 00 W Protection class (Device): IP 0 Temperature range (Device): - C to C Dimensions: (L x W x D): mm x mm x mm Busch-axcent Available from October 0 0/ / Order-o. /0-00 Available from October carat anthracite ivory 0/0-0/0-0/0- Available from October pure stainless steel stainless steel 0/0- Available from October Technical information Innovations 0

Flush-mounted inserts One system, many options.

Flush-mounted inserts One system, many options. Flush-mounted inserts One system, many options. Various series the same inserts. This basic principle of the ABB/Busch-Jaeger switch ranges ensures that the choices remain clear despite the many shapes

More information

Busch-AudioWorld. Manual for Electrical Specialists.

Busch-AudioWorld. Manual for Electrical Specialists. BuschAudioWorld Manual for Electrical Specialists www.buschjaeger.com Introduction Designed for separate rooms the multiroom sound system. Whether from the radio or hifi system you can now enjoy music

More information

The fascination of contrasts. Light switch.

The fascination of contrasts. Light switch. The fascination of contrasts. Light switch. 2 The light switch reinvented The light switch reinvented 3 Light switches by ABB / Busch-Jaeger. Living space needs light. Light needs light switches. A simple

More information

Radio controlled home automation

Radio controlled home automation Radio controlled home automation for retro-fit and new projects Hager quicklink is a home automation system accessible to all installers. It's an easy to use radio operation, offering control of applications

More information

EasyclickPro. Wireless Control Systems Making light work

EasyclickPro. Wireless Control Systems Making light work EasyclickPro Wireless Control Systems Making light work EasyclickPro EasyclickPro RF system The new Easyclick generation Honeywell Easyclick wireless and battery-less solutions for lighting, shutter and

More information

ABB India Helpline. Technical Telephone support for customers and channel partners. Toll Free: (BSNL) abb.com

ABB India Helpline. Technical Telephone support for customers and channel partners. Toll Free: (BSNL) abb.com ABB India Helpline. Technical Telephone support for customers and channel partners. Toll Free: (BSNL) +91 1800 420 07 07. abb.com Copyright 2018 ABB. All rights reserved. Specifications subject to change

More information

Radio Touch Order no.: 2880 xx. Operation and installation instructions. 1 Safety instructions. 2 Structure of the device (Figure 1) Radio Touch

Radio Touch Order no.: 2880 xx. Operation and installation instructions. 1 Safety instructions. 2 Structure of the device (Figure 1) Radio Touch Radio Touch Order no.: 2880 xx Operation and installation instructions 1 Safety instructions Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the

More information

luxcontrol lighting control system DALI sensors basicdim RCL DBC Control module for combination with ambient light sensor, switch and presence sensor

luxcontrol lighting control system DALI sensors basicdim RCL DBC Control module for combination with ambient light sensor, switch and presence sensor basicdim RCL DBC Control module for combination with ambient light sensor, switch and presence sensor Digital control module with ambient light sensor, motion detector and switch input DALI Broadcast control

More information

Mallia. Express Yourself Like Never Before

Mallia. Express Yourself Like Never Before TM Mallia Express Yourself Like Never Before It s s simple Mixing colours is a breeze with Mallia TM. With four new metal plates added to the current range, the possibilities are not only endless, but

More information

Radio motion detector comfort 1.1 m/2.2 m quicklink Order number

Radio motion detector comfort 1.1 m/2.2 m quicklink Order number Radio motion detector comfort 1.1 m/2.2 m quicklink Order number 8534 51.. Operating instructions 1. Safety instructions Electrical equipment may only be installed and assembled by a qualified electrician

More information

Mx-RPW Room Control Module (Built-In Occupancy Sensor)

Mx-RPW Room Control Module (Built-In Occupancy Sensor) Wireless Room Controller Application Solar-powered, self-learning room sensor with LCD and smart communication management for measuring room temperature, independent generation of utilization time profiles

More information

Mallia. Express Yourself Like Never Before

Mallia. Express Yourself Like Never Before TM Mallia Express Yourself Like Never Before SPOILT FOR CH ICE Mixing colours is a breeze with MalliaTM. With new rocker colours added to the range, there are now even more exciting possibilities. 2 WOW

More information

CLASSIC line Good Taste and Identity. METAL line Spaces with Personality.

CLASSIC line Good Taste and Identity. METAL line Spaces with Personality. CLASSIC line Good Taste and Identity. The CLASSIC line highlights itself by its classic design and unique structure. It is defined by its elegant traces, being available in 3 basic colours White, Ivory

More information

RGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor

RGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor LED STRIPS 1 LESS IS MORE FLEX: LED strip ECO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape. Voltage 24 V. ECO

More information

Reference number Dimensions Lamp Light colour

Reference number Dimensions Lamp Light colour 1 LED STRIPS PRO up to 152 lm/w LESS IS MORE FLEX: LED strip PRO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape.

More information

17/2 Introduction. Display, Operation 17/6 Introduction 17/7 Pushbuttons 17/10 Pushbutton accessories 17/11 Remote controls

17/2 Introduction. Display, Operation 17/6 Introduction 17/7 Pushbuttons 17/10 Pushbutton accessories 17/11 Remote controls Siemens AG 2009 GAMMA wave Radio System /2 Introduction Display, Operation /6 Introduction /7 Pushbuttons /10 Pushbutton accessories /11 Remote controls Output Devices /12 Introduction /13 Binary output

More information

Mallia. Express Yourself Like Never Before

Mallia. Express Yourself Like Never Before TM Mallia Express Yourself Like Never Before inside LOOKLove at First Sight 4 TOUCHSomething to Behold 10 LOVEMarvel at the Versatility 12 WOOForm and Functionality 18 CLOSEDetail Catalogue 20 03 2 Love

More information

WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany

WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany 522 WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany WAGO Products: WAGO-I/O-SYSTEM with ETHERNET Controllers, DALI and EnOcean Components Wireless Technologie System Overview 524

More information

CALRAD 25 series - potentiometers

CALRAD 25 series - potentiometers 25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length

More information

CALRAD MINIATURE MULTI-CLICK DUAL CONTROLS 40 STEP P.C. MOUNT 11

CALRAD MINIATURE MULTI-CLICK DUAL CONTROLS 40 STEP P.C. MOUNT 11 25 Series - Potentiometers Audio & Linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 /2" dia. fits into 1 /4 hole. Shaft 3 /16" dia. Thread length 7 /32", shaft

More information

ORDERING CODE Z-WAVE FREQUENCY COUNTRY/REGION

ORDERING CODE Z-WAVE FREQUENCY COUNTRY/REGION ZMNHDD1 868.4 MHz CEPT, China, Singapore, South Africa, UAE ZMNHDD2 921.4 MHz Australia, Brazil, New Zealand ZMNHDD3 908.4 MHz Chile, Mexico, USA/Canada ZMNHDD4 869.0 MHz Russia This module is used for

More information

PRODUCT INFORMATION TS Sensor

PRODUCT INFORMATION TS Sensor PRODUCT INFORMATION TS Sensor contents Perfect combination Exclusive Design Page 04 innovative Technology Page 05 Individual Character Design possibilities Page 06 Simple installation Quick and easy -

More information

Mallia. Express Yourself Like Never Before

Mallia. Express Yourself Like Never Before TM Mallia Express Yourself Like Never Before It s s simple Mixing colours is a breeze with Mallia TM. With four new metal plates added to the current range, the possibilities are not only endless, but

More information

Wireless Control Systems

Wireless Control Systems Wireless Control Systems Leading the way in intelligent automation contents Range Overview Typical Installations Transmitters Combined Modules Receivers Accessories Programming Switching & Dimmer Functions

More information

Universal Radio Cord Dimmer Order No.: Function

Universal Radio Cord Dimmer Order No.: Function Order o.: 0335 0 a) b) Function The permits radio-operated control of lighting fixtures. The device permits switching (short actuation) or dimming (long actuation) of the lighting. The dimmer is operated

More information

Niko connected switch. Effortlessly smarter

Niko connected switch. Effortlessly smarter Niko connected switch Effortlessly smarter 1 Everything is connected Stay in control, wherever you are Nowadays, we are connected to everything and everyone. Customers expect more and more from their devices.

More information

Busch-dynasty In a class of its own

Busch-dynasty In a class of its own Busch-dynasty In a class of its own Busch-dynasty the new elegance from Busch-Jaeger of Germany Busch-dynasty Exquisite objects have their very own fascination. They turn the house into a place of high

More information

ENVIRONMENTAL PROTECTION

ENVIRONMENTAL PROTECTION ENVIRONMENTAL PROTECTION Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices.

More information

Berker by Hager electronics

Berker by Hager electronics Berker by Hager electronics Really complete system Very integrated design Innovative groundbreaking technology Let's take a look... 9+16 >400 Inserts Application modules (conventional + KNX radio) Functions

More information

SLV SYSTEM SOLUTIONS. LIGHT AND HOME CONTROL.

SLV SYSTEM SOLUTIONS. LIGHT AND HOME CONTROL. 776 LIGT AND OME CONTROL. SYSTEM SOLUTIONS BIG ITE 2017 SLV SYSTEM SOLUTIONS. LIGT AND OME CONTROL. SLV meets the many requirements and needs of modern lighting control and home automation with its comprehensive

More information

Specification for Lightning Sensor

Specification for Lightning Sensor Specification for Lightning Sensor Patent Pending November 24. 2003 Content: 1. General description 2. Functional description 3. Electrical connections. 4. Electrical specifications. 5. Mechanical specifications.

More information

Rev ABB i-bus KNX 6151/11 U-500. Power and productivity for a better world TM

Rev ABB i-bus KNX 6151/11 U-500. Power and productivity for a better world TM 1 73-1-7831 Rev. 01 3.2012 6151/11 U-500 Power and productivity for a better world TM Page: 1 of 31 Switching actuator 1gang with binary Inputs, FM Actuator Article-no.: 6151/11 U-500 ETS search path:

More information

Our partnership with LightwaveRF. Megaman and LightwaveRF. No re-wiring no mess. An affordable smart home technology. Control Lightwave your way

Our partnership with LightwaveRF. Megaman and LightwaveRF. No re-wiring no mess. An affordable smart home technology. Control Lightwave your way Megaman and LightwaveRF Our partnership with LightwaveRF Megaman UK is pleased to announce a new partnership with LightwaveRF, a revolution in heating, lighting and power control. LightwaveRF is a range

More information

Product and Applications Description

Product and Applications Description Product and pplications Description Diagram The transmitter 230V wave UP 110 (Diagram ) is a flushmounted device with radio communication for the wireless operation of room functions. It is possible to

More information

VX-3000 Series Voice Alarm and Public Address System

VX-3000 Series Voice Alarm and Public Address System VX-3000 Series Voice Alarm and Public Address System VX-3000 SERIES Combined highly integrated voice alarm and public address system. The issue of security is more than ever important. Our VX-3000 is a

More information

Dual Technology Wall Mount Occupancy Sensor

Dual Technology Wall Mount Occupancy Sensor Occupant -1 02.01.06 Dual Technology Wall Mount Occupancy Sensor Models Available The Series wall-mount dual-technology sensors are used in spaces with pendant fixtures, ceiling fans, or high ceilings

More information

Pro duct Range Over view 2004/2005. ABB i-bus EIB / KNX. Intelligent Installation Systems

Pro duct Range Over view 2004/2005. ABB i-bus EIB / KNX. Intelligent Installation Systems Pro duct Range Over view 2004/2005 ABB i-bus EIB / KNX Intelligent Installation Systems Pro duct Range Over view Content Page 0 Introduction............................................. 2 1 Power Supplies..........................................

More information

2.7. IT system floor-standing distribution cabinet Series -IPS-F/EDS

2.7. IT system floor-standing distribution cabinet Series -IPS-F/EDS Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 65 35305 Grünberg Tel.: 0640 807-0 Fax: 0640 807-259 IT system floor-standing distribution cabinet Series -IPS-F/EDS for supplying power to medical locations

More information

DPA74/154 AUDAC PROFESSIONAL AUDIO EQUIPMENT. DPA74/154 Quad Channel Class-D Amplifier. User Manual & Installation Guide

DPA74/154 AUDAC PROFESSIONAL AUDIO EQUIPMENT. DPA74/154 Quad Channel Class-D Amplifier. User Manual & Installation Guide DPA74/154 PROFESSIONAL AUDIO EQUIPMENT DPA74/154 Quad Channel Class-D Amplifier AUDAC User Manual & Installation Guide AUDAC PROFESSIONAL AUDIO EQUIPMENT User Manual & Installation Guide AUDAC http://www.audac.eu

More information

INSTAT 868 Radio Frequency Single-Room Controls

INSTAT 868 Radio Frequency Single-Room Controls INSTAT 868 Radio Frequency Single-Room Controls Easy to operate wireless application HEATING People Performance Products Climate Controls Europe An Invensys company Radio Frequency Controls Single-room

More information

Smart Power Relay E I...

Smart Power Relay E I... Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic

More information

Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx

Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx Universal wireless dimmer up to 200 W for R, L, C load and LED lamps Wireless transmission based on IEE802.15.4 @ 2.4 GHz Automatic

More information

Dual Technology Wall Mount Occupancy Sensor

Dual Technology Wall Mount Occupancy Sensor LOS-WDT 1 11.04.08 Dual Technology Wall Mount Occupancy Sensor Models Available The wall-mount dual-technology sensors are used to control lighting in spaces that have pendant fixtures, ceiling fans, or

More information

Catalogue 1SFC en, Edition 3 November 2003 Supersedes Catalogue 1SFC en, Edition 2 November Arc Guard System TVOC

Catalogue 1SFC en, Edition 3 November 2003 Supersedes Catalogue 1SFC en, Edition 2 November Arc Guard System TVOC Catalogue 1SFC 266006-en, Edition 3 November 2003 Supersedes Catalogue 1SFC 266006-en, Edition 2 November 2000 Arc Guard System TVOC System units The two units of the are used as below: Approvals 1. with

More information

W I S E C O N T R O L S H O M E & G A R D E N W I S E D I M W I R E L E S S R A D I O T E C H N O L O G Y W I S E C O N T R O L S.

W I S E C O N T R O L S H O M E & G A R D E N W I S E D I M W I R E L E S S R A D I O T E C H N O L O G Y W I S E C O N T R O L S. WISE CONTROLS H O M E & G A R D E N W I S E D I M W I R E L E S S R A D I O T E C H N O L O G Y W I S E C O N T R O L S. C O M reliable simple 2 year guarantee wireless easy affordable CONTENTS 1 CONTENTS

More information

Transformers, Power Supply Units and Socket Outlets

Transformers, Power Supply Units and Socket Outlets Transformers, Power Supply Units and Socket Outlets /2 Introduction /3 4AC3 bell transformers /4 4AC3 safety transformers /5 4AC2 power supply units /6 5TE6 REG socket outlets For further technical product

More information

STC-KNX (32-channel AP)

STC-KNX (32-channel AP) STC-KNX (32-channel AP) Bidirectional-Gateway between EnOcean and EIB/KNX-Bus Operating and installation instructions Humidity sensors Light sensors Presence sensors Gas sensors Room control panels Automated

More information

KNX ENO 634 (32-channel AP)

KNX ENO 634 (32-channel AP) WEINZIERL GINEERING GmbH KNX O 634 (32-channel AP) Bidirectional-Gateway between EnOcean and KNX-Bus Operating and installation instructions Digital inputs Link from KNX to EnOcean actuator Switch Dimmer

More information

DRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters

DRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual

More information

BOLD, STRIKING & REFRESHING VIVO

BOLD, STRIKING & REFRESHING VIVO BOLD, STRIKING & REFRESHING VIVO 2 MODERN CHOICE BOLD, STRIKING & REFRESHING VIVO Choose the colour to suit your style Excel VIVO can be customised to suit your tastes and your interiors. Keep it simple

More information

14/2 14/5 14/9 14/11 DELTA 14/12 DELTA

14/2 14/5 14/9 14/11 DELTA 14/12 DELTA /2 General data /5 Flushmounting devices /9 Surfacemounting devices / DELTA wave pushbutton /2 DELTA sys pushbutton For further technical information please refer to the GAMMA building management systems

More information

CX-A6 Amplifier Installation & User Guide V9.0

CX-A6 Amplifier Installation & User Guide V9.0 CX-A6 Amplifier Installation & User Guide V9.0 Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF England Tel + 44 (0) 114 244 7051 Fax + 44 (0) 114 242 5462 E-mail info@cloud.co.uk Web site

More information

KNX radio wall-transmitter 1gang/2gang flat quicklink Order no.: 8565 x2 xx

KNX radio wall-transmitter 1gang/2gang flat quicklink Order no.: 8565 x2 xx KNX radio wall-transmitter 1gang/2gang flat quicklink KNX radio wall-transmitter 1gang/2gang flat quicklink Order no.: 8565 x2 xx KNX radio wall-transmitter 1gang/2gang flat solar quicklink Order no.:

More information

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0 Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.

More information

Fibaro System Modules

Fibaro System Modules Chapter 3 Fibaro System Modules 3.1 Fibaro Dimmer FGD211 Figure 3.1: Dimmer module, FGD-211 Radio controlled light dimming module, designed to work with light sources of any type. May be connected to two-wire

More information

PRODUCT CATALOGUE TEMPERATURE CONTROL Grässlin products for individual control of temperature

PRODUCT CATALOGUE TEMPERATURE CONTROL Grässlin products for individual control of temperature PRODUCT CATALOGUE TEMPERATURE CONTROL Grässlin products for individual control of temperature Temperature control: Feel good at any time of year Room thermostats Heating time switches Excellent products

More information

WIRELESS INSULATOR POLLUTION MONITORING SYSTEM

WIRELESS INSULATOR POLLUTION MONITORING SYSTEM SYSTEM OVERVIEW Pollution monitoring of high voltage insulators in electrical power transmission and distribution systems, switchyards and substations is essential in order to minimise the risk of power

More information

audionet amp II G2 Owner's Manual Mono - Amplifier

audionet amp II G2 Owner's Manual Mono - Amplifier audionet amp II G2 Mono - Amplifier Owner's Manual Owner's manual The Audionet-Team would like to congratulate you to purchasing the Audionet AMP II G2! Your Audionet AMP II G2 is designed for absolutely

More information

Wireless Time Distribution WTD

Wireless Time Distribution WTD Proud Partners with MOBATime Wireless Time Distribution WTD The innovative radio clock system is based on a transmitter which sends the time signal (868 MHz) to the end devices (i.e. clocks). The end devices

More information

Brunata Optuna H Ultrasonic energy meter Type 775 Installation Guide Edition 1.2

Brunata Optuna H Ultrasonic energy meter Type 775 Installation Guide Edition 1.2 Ultrasonic energy meter Type 775 Installation Guide Edition 1.2 UK-QB101575 / 29.05.2012 Brunata a/s is a Danish owned company. We have more than 90 years of experience within developing and producing

More information

Helpful accessoires for wireless sensors

Helpful accessoires for wireless sensors 8 Helpful accessoires for wireless sensors 8 active and passive wireless sensors and wired bus sensors E-Design frames R1E, R2E, R3E and R4E 8-2 E-Design fl at frames RF1E, RF2E, RF3E and RF4E 8-2 Universal

More information

ALPHA DIN Wall-Mounted. Distribution Boards

ALPHA DIN Wall-Mounted. Distribution Boards Siemens AG 008 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quick-assembly kits Unequipped

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

KNX Powerline PL 110. KNX Association

KNX Powerline PL 110. KNX Association KNX Powerline PL 110 Table of Contents 1 Introduction...3 2 Standardisation...3 3 Transmission Process...4 3.1 Phase Coupling...5 3.2 Telegram Transmission...6 3.2.1 Training Sequence...6 3.2.2 Preamble

More information

Technical data: Instabus EIB supply Voltage: YY 6 x 0.6 mm; red: bus (+) / black: bus (-)

Technical data: Instabus EIB supply Voltage: YY 6 x 0.6 mm; red: bus (+) / black: bus (-) Product designation: switching actuator 2fold 6A FM Design: FM (flush-mounted type) Article no.: 1057 00 ETS search path: Gira Giersiepen / Output / Binary output, 2fold / switching actuator 2fold 6A FM

More information

CX-A6 Amplifier Installation & User Guide V8.0

CX-A6 Amplifier Installation & User Guide V8.0 CX-A6 Amplifier Installation & User Guide V8.0 Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF England Tel + 44 (0) 114 244 7051 Fax + 44 (0) 114 242 5462 E-mail info@cloud.co.uk Web site

More information

TOA 500 SERIES MIXER POWER AMPLIFIER

TOA 500 SERIES MIXER POWER AMPLIFIER TOA 500 SERIES MIXER POWER AMPLIFIER Operation Instruction Manual A-503A A-506A A-512A Features General Description 1. High quality design and construction. 2. Full frequency response: 50-15,000Hz, ±3dB.

More information

Unidirectional Gateway EnOcean - KNX/BUS

Unidirectional Gateway EnOcean - KNX/BUS Unidirectional Gateway EnOcean - KNX/BUS Page 1.Use...1 2. Technical features...................1 3.Overalldimensions...1 4.Connection...2 5. Operation...2 6. Standards and approvals............3 7.Maintenance...3

More information

TORKEL 900-series Battery Load Unit

TORKEL 900-series Battery Load Unit TORKEL 900-series Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Easy

More information

Wind Transmitter First Class

Wind Transmitter First Class THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021310/07/06 Wind Transmitter First Class 4.3350.00.000 4.3350.10.000 ADOLF THIES GmbH & Co. KG Hauptstraße

More information

TORKEL 900-series Battery Load Unit

TORKEL 900-series Battery Load Unit Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Quick report Easily

More information

Maestro Local Lighting Controls

Maestro Local Lighting Controls L O C A L L I G H T I N G C O N T R O L S Maestro local lighting controls, function like standard dimmers and switches, but can be controlled as part of the whole-house lighting control system. Local lighting

More information

Blinded by the LIGHT Manfred Mann (#6 in August 1976)

Blinded by the LIGHT Manfred Mann (#6 in August 1976) Blinded by the LIGHT Manfred Mann (#6 in August 1976) SceneStyle from Mode is the stylish way to control your lighting. Self-contained, they connect to your existing wiring without fuss and can control

More information

PHASED OUT. LED Driver Compact dimming. Driver LCAI 20W 350mA 900mA ECO SR ECO series

PHASED OUT. LED Driver Compact dimming. Driver LCAI 20W 350mA 900mA ECO SR ECO series Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee Dimming

More information

IP Series DUAL POWER AMPLIFIERS

IP Series DUAL POWER AMPLIFIERS OPERATING INSTRUCTIONS IP Series DUAL POWER AMPLIFIERS IP-600D IP-450D IP-300D TABLE OF CONTENTS 1. SAFETY PRECAUTIONS... 2 2. GENERAL DESCRIPTION... 4 3. FEATURES... 4 4. HANDLING PRECAUTIONS... 4 5.

More information

Data sheet E-DAT modul 2 port AP Cat.6 A, pearl white

Data sheet E-DAT modul 2 port AP Cat.6 A, pearl white Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC

More information

Single Pole Switch. BR - White

Single Pole Switch. BR - White SURFACE MOUNTING DEVICES Single Pole Switch BR - White The is the versatile option for installations in professional or institutional spaces like offices, schools, commerce, etc. With a discreet design,

More information

LED Driver Compact dimming

LED Driver Compact dimming Driver LCAI 35W 350mA 900mA ECO C ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 35 W Nominal

More information

JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes

JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes Data sheet 902931 Page 1/10 JUMO Wtrans Receiver Universal Receiver for JUMO Wireless Measuring Probes For processing physical measurands of the JUMO Wtrans series RS485 interface with Modbus protocol

More information

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped

More information

Measurement. SITRANS F US Inline. 3/262 Siemens FI Transmitter SITRANS FUS080/FUE080

Measurement. SITRANS F US Inline. 3/262 Siemens FI Transmitter SITRANS FUS080/FUE080 Overview The transmitter is available in an IP67/NEMA 4X/6 enclosure and is designed for use in the flowmeters series: SONOKIT (1-path or -path) FUS80 (-path) FUE80 (-path) The transmitter FUS080 is always

More information

Overview Installation & Connection Mounting

Overview Installation & Connection Mounting Overview The Keene K-LAB-20 is compact, powerful stereo amplifier built onto a standard size UK double gang wall plate. It provides 20W (RMS per channel) of amplification eliminating the need to make space

More information

Smart-house Dimmer Power dimmer up to 500W Type SH2D500W230

Smart-house Dimmer Power dimmer up to 500W Type SH2D500W230 Smart-house Dimmer Power dimmer up to 500W Type SH2D500W230 Universal dimmer switch for R, L, C up to 500W and LED loads Automatic load detection for L, R, C loads Integrated heat sink for temperature

More information

Instruction. INFOCAL 8 Energy calculator. 1.0 Table of contents. 2.0 Safety notes and product information

Instruction. INFOCAL 8 Energy calculator. 1.0 Table of contents. 2.0 Safety notes and product information Instruction INFOCAL 8 Energy calculator 1.0 Table of contents 1.0 Table of contents...1 2.0 Safety notes and product information...1 3.0 Installation of energy calculator...2 4.0 Installation of temperature

More information

PHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO SR ECO series

PHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO SR ECO series Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power 55 W Nominal life-time up to 100,000 h 5-year guarantee

More information

.2 Section Waste Management and Disposal..4 Section Electrical General Requirements.

.2 Section Waste Management and Disposal..4 Section Electrical General Requirements. Issued 2006/08/01 Section 16724 Public Address System Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section 01780

More information

JUMO Wtrans E01. Measuring probe for humidity, temperature, and CO 2 with wireless data transmission. Brief description. Universal Wtrans receiver

JUMO Wtrans E01. Measuring probe for humidity, temperature, and CO 2 with wireless data transmission. Brief description. Universal Wtrans receiver Page 1/13 JUMO Wtrans E01 Measuring probe for humidity, temperature, and CO 2 with wireless data transmission Humidity from 0 to 100 % RH (incl. -40 to +80 C) or CO 2 from 0 to 2000/5000/10000 ppm or Temperature

More information

2 $POUFOUT

2 $POUFOUT 2 3 Insta The company 4 Tronic Trafo Controls Instafunk Appendix 46 4 Insta is an innovative, medium-sized company, part of a group of companies of building installation technology with focus on development

More information

LCC1653, LCC1656, LRI1653 Datasheet ActiLume DALI System

LCC1653, LCC1656, LRI1653 Datasheet ActiLume DALI System 1/8 Product description The Philips ActiLume lighting control system consists of a small, lightweight sensor and controller, designed for easy integration into luminaires. ActiLume is a true Plug and Play

More information

SonoMeter 31 Energy Meters

SonoMeter 31 Energy Meters SonoMeter 31 Energy Meters Description MID examination certificate no.: LT-1621-MI004-023 The Danfoss SonoMeter 31 is a range of ultrasonic, compact energy meters intended for measuring energy consumption

More information

PHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series

PHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series EL Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 150 400 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee

More information

Simplicity is the ultimate sophistication. Leonardo da Vinci

Simplicity is the ultimate sophistication. Leonardo da Vinci 1 Simplicity is the ultimate sophistication. Leonardo da Vinci 3 The essence of home automation Technology in the modern home is evolving more rapidly than ever, creating enormous possibilities. However,

More information

Radio BMR100 INSTRUCTION MANUAL. ENGLISH (Original instructions)

Radio BMR100 INSTRUCTION MANUAL. ENGLISH (Original instructions) ENGLISH (Original instructions) INSTRUCTION MANUAL Radio BMR00 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Symbols The following show

More information

TOA NEW 900 SERIES MIXER PREAMPLIFIER M-900A

TOA NEW 900 SERIES MIXER PREAMPLIFIER M-900A Operation Instruction Manual TOA NEW 900 SERIES MIXER PREAMPLIFIER M-900A Features General Description 1 6-channel mixer preamplifier 2 Wide frequency response; 20 20,000Hz, ±1dB 3 Low distortion and noise

More information

EBDHS-AT-DD. RF ceiling PIR presence detector DALI / DSI dimming. Product Guide. Overview. Features

EBDHS-AT-DD. RF ceiling PIR presence detector DALI / DSI dimming. Product Guide. Overview. Features Product Guide EBDHS-AT-DD RF ceiling PIR presence detector DALI / DSI dimming Overview The EBDHS-AT-DD is a passive infrared (PIR) motion sensor combined with two output channels capable of controlling

More information

luxcontrol lighting control system basicdim basicdim ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor

luxcontrol lighting control system basicdim basicdim ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor ILD 16DPI 69f Compact control module with ambient light sensor and motion sensor Product description Compact dimensions for luminaire installation For up to 10 DSI or LI devices (max. 5 per output channel)

More information

1 Safety instructions. 2 Device components. Radio bus system. Radio socket outlet adapter for dimming Order No. : Operating instructions

1 Safety instructions. 2 Device components. Radio bus system. Radio socket outlet adapter for dimming Order No. : Operating instructions Order No. : 1185.. Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible.

More information

BeoLink Passive. Setting-up Guide

BeoLink Passive. Setting-up Guide BeoLink Passive Setting-up Guide CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel. WARNING:

More information

KNX manual 1-channel flush-mounted switch actuator SU 1

KNX manual 1-channel flush-mounted switch actuator SU 1 KNX manual 1-channel flush-mounted switch actuator SU 1 4942520 2018-10-04 Contents 1 Function description 3 2 Operation 4 3 Technical data 5 4 The SU 1 application programme 7 4.1 Selection in the product

More information

CAMTO. Arc detecting relay. system. January Revised August D D1200

CAMTO. Arc detecting relay. system. January Revised August D D1200 NEW ARC DETECTING SYSTEM FROM Based on our experience with arc protection since 1962, has developed a new. The units are built into boxes that all fit on a 35 mm DIN-rail. All front plates are dimensioned

More information