ECHOTEL 915 series. 2 Wire, current shift Ultrasonic level switch. Worldwide level and flow solutions DESCRIPTION. Compact and universal level switch

Size: px

Start display at page:

Download "ECHOTEL 915 series. 2 Wire, current shift Ultrasonic level switch. Worldwide level and flow solutions DESCRIPTION. Compact and universal level switch"

Ethel Green
6 years ago
Views:

ECHOTEL 915 series 2 Wire, current shift Ultrasonic level switch DESCRIPTION Echotel 915 series ultrasonic level controls are 2 wire (24 V DC) integral units which utilize pulsed wave technology to

The 915 series has protected electronics, and its high frequency signal prevents the unit from picking up noise from surrounding equipment such as engines, pumps etc.

1 ECHOTEL 915 series 2 Wire, current shift Ultrasonic level switch DESCRIPTION Echotel 915 series ultrasonic level controls are 2 wire (24 V DC) integral units which utilize pulsed wave technology to detect high or low level alarm in a broad range of viscous to light liquids. The 915 series has protected electronics, and its high frequency signal prevents the unit from picking up noise from surrounding equipment such as engines, pumps etc... Compact and universal level switch FEATURES No calibration. 2-Wire loop powered intrinsically safe design. Continuous selftest with separate error signal. Metal and plastic transducers. High or low level detection - field selectable. High pressure / temperature ratings: - metal transducers: max C - Kynar (PVDF) transducers: max 19 bar / max +120 C. Suited for SIL 1, 2 and 3 loops (full FMEDA report by exida available) Threaded Echotel 915 with Kynar transducer SAFETY INTEGRITY LEVEL APPLICATIONS LIQUIDS: Any liquids with a viscosity < cp. VESSELS: Any mounting position. PROCESS CONDITIONS: Unaffected by - shifting dielectric, density, or PH - presence of foam, turbulence, visible vapors - fast drain/fill rates - transducer coating and air bubbles - vacuum conditions. AGENCY APPROVALS ➀ ➁ Agency ATEX Approval TÜV WHG 19 II 1G EEx ia II C T6/T5, intrinsically safe ➀ II 1/2 G EEx d II C T6, explosion proof ➀ AIB VLAREM II FM/CSA ➁ GOST/ GOSGORTECHNADZOR ➁ Flanged Echotel 915 with metal transducer Non incendive / intrinsically safe / explosion proof Only for metal sensors. Consult factory for correct model numbers Russian Authorisation Standards Worldwide level and flow solutions

2 PRINCIPLE OF OPERATION The Echotel 915 operates on a two crystal pulsed or transmit-receive principle which applies a high frequency electronic burst to the transmit crystal. The signal is then converted into ultrasonic energy and transmitted across the sensing gap toward the receiver crystal. When there is air in the gap, the high frequency ultrasonic energy will be attenuated, thereby not allowing the energy to be received. When there is liquid in the gap, the ultrasonic energy will propagate across the gap and the current shift output will indicate a reception of the signal. ma Normal Alarm T R T R Error signal Normal operation Error Air/Gas Dry gap Liquid Wet gap MOUNTING Ambient temperature: -40 C (-40 F) to +70 C (+160 F) Filling line Hi alarm Lo alarm Hi alarm Max pressure: metal transducer: 103 bar (1500 PSIG) Kynar transducer: 19 bar (275 PSIG) Lo alarm Max temp: metal transducer: +150 C (+300 F) Kynar transducer: +120 C (+250 F) Min temp: -40 C (-40 F) Pump protection Pump PERFORMANCE SPECIFICATIONS Description Specification Response time 0,15 s typical Repeatability ±2 mm (0.078") Ambient Temperature -40 C up to +70 C (-40 F to +160 F) Humidity 0-99 %, non condensing Electromagnetic Compatibility Meets CE requirements (EN , EN ) and NAMUR NE 21 2

PHYSICAL/FUNCTIONAL SPECIFICATIONS Description Input Voltage Power Consumption Signal Output Indication Housing material Approvals Normal operation Alarm Malfunction Normal operation Alarm

3 PHYSICAL/FUNCTIONAL SPECIFICATIONS Description Input Voltage Power Consumption Signal Output Indication Housing material Approvals Normal operation Alarm Malfunction Normal operation Alarm Malfunction ATEX (metal transducers) FM/CSA Specification V DC (24 V DC) 2 wire loop powered 1 Watt maximum 16 ma ± 1 ma 8 ma ± 1 ma 5 ma ± 1 ma Green LED on Red LED on No LED s on IP65, cast aluminium or stainless steel II 1 G EEx ia II C T6, intrinsically safe - ambient temp. up to +55 C (+130 F) II 1 G EEx ia II C T5, intrinsically safe - ambient temp. up to +70 C (+160 F) II 1/2 G EEx d II C T6, explosion proof Non incendive, intrinsically safe and explosion proof Overfill Prevention TÜV - WHG 19 / VLAREM II SIL (Safety Integrity Level) Functional safety to SIL 2 loops / SIL 3 loops (redundant installation) full FMEDA report by Exida available Electrical data Ui = 28,4 V, li = 94 ma, Pi = 0,67 W Equivalent data Ci = 25 nf, Li = 400 µh Shock/Vibration ANSI/ISA-dS71.03 SA1 (shock), ANSI/ISA-dS71.03 VC2 (vibration) Net Weight 1,6 kg / 3.5 lbs (unit with 50 mm SST transducer) TRANSDUCERS SPECIFICATIONS Description 9W1 transducers (plastic) 9D1 transducers (metal) Transducer materials Kynar (PVDF) 316/316L SST (1.4401/1.4404) Hastelloy C (2.4819) Monel (2.4360) Mounting Threaded (NPT) Flanged (ANSI - EN/DIN) Actuation length From 40 mm up to 3300 mm (2" up to 130") From 30 mm up to 3300 mm (1" up to 130") Max process temp. -40 C up to 120 C (-40 F up to 250 F) -40 C up to 150 C (-40 F up to 300 F) Max pressure C ( F) C (1500 psi up to 300 F) Flanged models are downrated to the design pressure of the selected flange Max viscosity cp ELECTRICAL WIRING Hazardous area (915-P) Safe area 2-wire, loop powered or Electronic module 3

4 ECHOTEL 915-W: with Kynar Dimensions in mm (inches) (PVDF) transducer Ø 118 (4.63) 76 (3) Ø 118 (4.63) 76 (3) 70 (2.75) 70 (2.75) 97 (3.80 ) 114 ( 4.49) 20 ( 0.79) Actuation length Actuation length 6 (0.25) 6 (0.25) Ø 21 (0.84) Threaded unit Ø 21 (0.84) Flanged unit Pressure/Temperature Rating bar (psi) 20 (290) Process pressure 15 (217) 10 (145) ANSI RF Flange DIN Flange 5 (72) 3/4" NPT Threaded -40 (-40) 0 (32) 40 (100) 80 (176) 120 (250) C ( F) Process temperature 4 EXPEDITE SHIP PLAN (ESP) Several Echotel 915 units are available for quick shipment, within max. 3 weeks after factory receipt of purchase order, through the Expedite Ship Plan (ESP). Models covered by ESP service are conveniently grey coded in the selection data charts. To take advantage of ESP, simply match the colour grey model number codes (standard dimensions apply). ESP service may not apply to orders of ten units or more. Contact your local representative for lead times on larger volume orders, as well as other products and options.

5 ECHOTEL 915-W: with Kynar Selection data A complete measuring system consists of: (PVDF) transducer 1. One order code for electronics 2. One order code for Kynar (PVDF) transducer 1. Order code for Echotel 915-W electronics 2-wire, 24 V DC potted electronics with 8 or 16 ma output 5 ma error signal BASIC MODEL NUMBER W Echotel 915-W electronics for Kynar (PVDF) transducers OUTPUT 2 2 A 2-wire loop powered electronics with Current shift output HOUSING MATERIAL / CABLE ENTRY / IP65 - WHG Aluminium M20 x 1,5 general purpose 0 I 0 Aluminium 3/4" NPT general purpose 0 Y 0 Stainless steel 3/4" NPT general purpose W 2 2 A 0 0 complete order code for Echotel 915 electronics 2. Order code for kynar transducer BASIC MODEL NUMBER 9 W 1 Echotel 915-W Kynar transducer PROCESS CONNECTION Threaded 1 Threaded 3/4" NPT connection ANSI RF Flanges in 316/316L SST (1.4401/1.4404) with Kynar (PVDF) facing B 1" 150 lbs - Raised Face C 1 1/2" 150 lbs - Raised Face D 2" 150 lbs - Raised Face EN/DIN Flanges in 316/316L SST (1.4401/1.4404) with Kynar (PVDF) facing K DN 25 PN16 EN Type A M DN 50 PN16 EN Type A TRANSDUCER MATERIAL K K M Kynar (PVDF) ACTUATION LENGTH specify in cm (0.39") increments Total length = actuation length + 6 mm (0.25") mm - min actuation length for threaded process connection mm - min actuation length for flanged process connection mm - standard ESP actuation length for threaded process connection mm - maximum actuation length 9 W 1 K K M complete order code for Echotel 915-W kynar transducer 5

6 ECHOTEL 915-P: with metal transducer Dimensions in mm (inches) Ø 118 (4.63) 76 (3) Ø 118 (4.63) 76 (3) 70 (2.75) 70 (2.75) 68 (2.67) 97 (3.80 ) 20 (0.79) Actuation Length for 3/4" NPT connection Actuation Length for 1" BSP (G1) connection Actuation 6 (0.25) 6 (0.25) Ø 22 (0.875) Ø 22 (0.875) Threaded unit Flanged unit Selection data A complete measuring system consists of: 1. One order code for electronics 2. One order code for metal transducer 1. Order code for Echotel 915-P electronics 2-wire, 24 V DC potted electronics with 8 or 16 ma output 5 ma error signal SENSOR MATERIAL P 2 2 A Echotel 915P electronics for 316/316L (1.4401/1.4404) SST transducer P 3 2 A Echotel 915P electronics for Monel (2.4360) transducers / Hastelloy C (2.4819) transducers (transducer materials Code MM and HC) HOUSING MATERIAL / CABLE ENTRY / SAFETY APPROVAL IP Aluminium M20 x 1,5 general purpose and ATEX intrinsically safe 0 I 0 Aluminium 3/4" NPT general purpose and ATEX intrinsically safe 0 Y 0 Stainless steel 3/4" NPT general purpose and ATEX intrinsically safe HOUSING MATERIAL / CABLE ENTRY / SAFETY APPROVAL IP65 0 T 0 Aluminium M20 x 1,5 ATEX explosion proof 0 K 0 Aluminium 3/4" NPT ATEX explosion proof P 2 A 0 0 complete order code for Echotel 915-P electronics 6

7 ECHOTEL 915-P: with metal transducer Selection data 2. Order code for Echotel 915-P transducer BASIC MODEL NUMBER 9 D 1 Echotel 915-P metal transducers PROCESS CONNECTION Threaded 1 Threaded 3/4" NPT connection 2 Threaded 1" NPT connection 9 Threaded 1" BSP (G1) connection (minimum length transducer = 50 mm (2") ANSI RF Flanges B 1" 150 lbs - Raised Face C 1 1/2" 150 lbs - Raised Face D 2" 150 lbs - Raised Face E 1" 300 lbs - Raised Face F 1 1/2" 300 lbs - Raised Face G 2" 300 lbs - Raised Face H 1" 600 lbs - Raised Face J 2" 600 lbs - Raised Face EN/DIN Flanges K DN 25/PN 16, EN Type A L DN 40/PN 16, EN Type A M DN 50/PN 16, EN Type A N DN 25/PN 25, EN Type A P DN 40/PN 25, EN Type A Q DN 50/PN 25, EN Type A R DN 25/PN 40, EN Type A S DN 40/PN 40, EN Type A T DN 50/PN 40, EN Type A U DN 25/PN 63, EN Type B2 V DN 40/PN 63, EN Type B2 W DN 50/PN 63, EN Type B2 X DN 25/PN 100, EN Type B2 Y DN 40/PN 100, EN Type B2 Z DN 50/PN 100, EN Type B2 TRANSDUCER MATERIALS /316L (1.4401/1.4404) - only for Echotel P22A HC1 Hastelloy C (2.4819) - only for Echotel P32A MM 1 Monel (2.4360) - only for Echotel P32A ACTUATION LENGTH specify in cm (per 0.39") increments Total insertion length = actuation length + 6 mm (0.25") mm - min actuation length for NPT threaded process connections mm - min actuation length for 1" BSP (G1) / flanged process connections mm - maximum actuation length 9 D 1 1 complete order code for Echotel 915-P transducer 7

8 QUALITY ASSURANCE - ISO 9001:2000 THE QUALITY ASSURANCE SYSTEM IN PLACE AT MAGNETROL GUARANTEES THE HIGHEST LEVEL OF QUALITY DURING THE DESIGN, THE CONSTRUCTION AND THE SERVICE OF CONTROLS. OUR QUALITY ASSURANCE SYSTEM IS APPROVED AND CERTIFIED TO ISO 9001:2000 AND OUR TOTAL COMPANY IS COMMITTED TO PROVIDING FULL CUSTOMER SATISFACTION BOTH IN QUALITY PRODUCTS AND QUALITY SERVICE. :2000 PRODUCT WARRANTY ALL MAGNETROL ELECTRONIC AND ULTRASONIC LEVEL CONTROLS ARE WARRANTED FREE OF DEFECTS IN MATERIALS AND WORK- MANSHIP FOR ONE FULL YEAR FROM THE DATE OF ORIGINAL FACTORY SHIPMENT. IF RETURNED WITHIN THE WARRANTY PERIOD; AND, UPON FACTORY INSPEC- TION OF THE CONTROL, THE CAUSE OF THE CLAIM IS DETERMINED TO BE COVERED UNDER THE WARRANTY; THEN, MAGNETROL INTERNATIONAL WILL REPAIR OR REPLACE THE CONTROL AT NO COST TO THE PURCHASER (OR OWNER) OTHER THAN TRANSPORTATION. MAGNETROL SHALL NOT BE LIABLE FOR MISAPPLICATION, LABOR CLAIMS, DIRECT OR CONSEQUENTIAL DAMAGE OR EXPENSE ARISING FROM THE INSTALLATION OR USE OF THE EQUIPMENT. THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, EXCEPT, SPECIAL WRITTEN WARRANTIES COVERING SOME MAGNETROL PRODUCTS. UNDER RESERVE OF MODIFICATIONS BENELUX Heikensstraat 6, 9240 Zele, België Tel. +32 (0) Fax. +32 (0) info@magnetrol.be DEUTSCHLAND Alte Ziegelei 2-4, D Overath Tel / Fax / vertrieb@magnetrol.de FRANCE 40-42, rue Gabriel Péri, Le Plessis Bouchard Tél Fax magnetrolfrance@magnetrol.fr ITALIA Via Arese 12, I Milano Tel. (02) (R.A.) Fax. (02) mit.gen@magnetrol.it UNITED Unit 1 Regent Business Centre, Jubilee Road Burgess Hill West Sussex RH 15 9TL KINGDOM Tel. (01444) Fax (01444) sales@magnetrol.co.uk INDIA E-22, Anand Niketan, New Delhi Tel. 91 (11) Fax 91 (11) info@magnetrolindia.com OUR NEAREST REPRESENTATIVE BULLETIN N : BE EFFECTIVE: MAY 2005 SUPERSEDES: October 2003

ECHOTEL 961/962. Ultrasonic level switches. Loop or line powered D E S C R I P T I O N F E AT U R E S A G E N C Y A P P R O VA L S

ECHOTEL 961/962. Ultrasonic level switches. Loop or line powered D E S C R I P T I O N F E AT U R E S A G E N C Y A P P R O VA L S ECHOTEL 961/962 Ultrasonic level switches D E S C R I P T I O N The Echotel 961/962 series utilizes pulse signal technology to detect high or low level alarm(s) in a broad range of viscous to light liquids.