FiberHome Fiber Products

Size: px
Start display at page:

Download "FiberHome Fiber Products"

Transcription

1 FiberHome Fiber Products FiberHome OPTICAL FIBER ISO 9001specification Shanghai stock code: Fiber Products FiberHome Low Water Peak Single mode Fiber FiberHome Bending Insensitive Single mode Fiber FiberHome Graded Index Multimode Optical Fiber (62.5/125μm) FiberHome Graded Index Multimode Optical Fiber (50/125μm) FiberHome Gb/s GIMM Fiber (50/125μm) FiberHome Gb/s GIMM Fiber (50/125μm) FiberHome Gb/s GIMM Fiber (50/125μm) Optical modules FiberHome DCM

2 FiberHome SMF FiberHome SMF ISO 9001specification Shanghai stock code: Description FiberHome low water peak dispersion unshifted single mode fiber is designed especially for optical transmission systems operating over the entire wavelength window from 1260nm to. By suppressing the water peak that occurs near 1385nm in conventional single mode fiber due to hydroxyl(oh)ions absorption, FiberHome SMF is able to open E band ( nm) for operation, and consequently provides 100nm more usable wavelengths. FiberHome SMF is comprehensively optimized for and dispersion performance across the entire wavelength window from 1260nm up to and upgraded for macro bending performance in L band (1565 ). The fiber is fully satisfying the demand for transmitting multichannel high speed services over one single fiber. Application Thanks to its broad usable optical spectrum and outstanding optical performance, FiberHome SMF is the optimum choice that supports various applications such as Ethernet, Internet Protocol(IP), Asychronous Transfer Mode(ATM), Synchronous Optical etwork(soet) and Wavelength Division Multiplexing(WDM). FiberHome SMF provides more bandwidth for backbone, metropolitan area and access networks. FiberHome SMF enables bandwidth demanding of multi services like voice, digital and image transmission. FiberHome SMF is applicable in all cable types including ribbon cable, loose tube stranded cable, slotted core cable, unitube cable and tight buffer cable. orms FiberHome SMF complies with or exceeds the ITU T Recommendation G.652.D and IEC type B1.3 Optical Fiber Specification. FiberHome tightens many parameters of fiber products so as to offer more conveniences to customers.

3 FiberHome MMF FiberHome SMF Product Specifications Optical Characteristics vs. Wavelength Max. α difference G.652D Single-mode Fiber Features 1383nm 1285~1330nm 1525~1575nm (after H2-aging) Dispersion coefficient 18 (nm.) Zero dispersion wavelength 1312±10 nm Zero dispersion slope Typical value PMD Maximum Individual Fiber Link Design Value(M=20,Q=0.01%) Typical value Cable cutoff wavelength λcc 1260 nm Mode Field Diameter(MFD) Effective group index of refraction (eff) Point discontinuities Geometrical Characteristics ± ± Cladding diameter 124.8±0.7 μm Cladding non-circularity 0.70 % Coating diameter 245±5 μm Coating-cladding concentricity error 12.0 μm Coating non-circularity 6.0 % Core-cladding concentricity error 0.5 μm Curl (radius) 4 m Delivery length 2.1~50.4 /reel Environmental Characteristics(, and ) Temperature dependence Induced at -60 ~+85 Temperature-humidity cycling Induced at -10 ~+85,98%RH Watersoak dependence Induced at Damp heat dependence Induced at 23,for 30 days 85 and 85%RH,for 30 days Dry heat at 85 Proof test 9.0 Macro-bend induced 1 turn around a mandrel of Ф32mm 100 turns around a mandrel of Ф50mm 100 turns around a mandrel of Ф60mm Coating strip force Dynamic stress corrosion susceptibility Parameter d & Typical average force Peak force μm μm

4 FiberHome MMF FiberHome Bending Insensitive Single-mode Fiber(FiberHome SMF) ISO 9001specification Shanghai stock code: Description FiberHome bending insensitive single mode fiber encompasses all the features of low water peak dispersion unshifted single mode fiber and provides good resistance to macro bending. It has low macro bending sensitivity and low water peak level. It is comprehensively optimized for use in O E S L band(1260 ). It offers good resistance to additional losses due to low macro bending in the 1600nm wavelength region. This not only supports L band applications but also allows for easy installation without excessive care when storing the fiber, for example, in splicing cassettes. For cable use inside buildings, the fiber supports installation with small cable bending radii and compact organizers. The bending induced loss at no more than 0.5 for one wind with 10nm radius. Application Short pitch cables for special application High performance optical network operating in O E S C L band High speed optical routes in buildings (FTT x ) Cables with low bending requirements Characteristics Low satisfying the operation demand in O E S C L band Good bending loss resistance at short radius bends Low micro bending loss for highly demanding cable designs including ribbons Low PMD satisfying high bit rate and long distance transmission requirements Accurate geometrical parameters that insure low slicing loss and high splicing efficiency

5 Product Specifications FiberHome SMF FiberHome Bending Insensitive Single-mode Fiber(FiberHome SMF) Optical Characteristics vs. Wavelength Max. α difference Dispersion coefficient G.657A1 Single-mode Fiber Features 1383nm(After H2-aging) 1490nm 1285~1330nm 1525~1575nm 1285~1340nm Zero dispersion wavelength 1300~1324 nm (nm.) (nm.) Zero dispersion slope (nm2.) PMD Maximum Individual Fiber Link Design Value(M=20,Q=0.01%) Typical value Cable cutoff wavelength λcc 1260 nm Mode Field Diameter(MFD) Point discontinuities 8.8± ±0.5 Geometrical Characteristics Cladding diameter 125±0.7 μm Cladding non-circularity 0.7 % Coating diameter 245±5 μm Coating-cladding concentricity error 12.0 μm Core-cladding concentricity error 0.5 μm Curl (radius) 4 m Delivery length 2.1~50.4 /reel Environmental Characteristics(, and ) Temperature dependence Induced at Temperature-humidity cycling Induced at Watersoak dependence Induced at Damp heat dependence Induced at μm μm -60 ~ ~+85,98%RH 23,for 30 days 85 and 85%RH,for 30 days Dry heat at 85 Proof test 9.0 Macro-bend induced 10 turns Ф30mm 10 turns Ф30mm 1 turns Ф20mm 1 turns Ф20mm Coating strip force typical average force 1.5 Dynamic stress corrosion susceptibility parameter

6 Product Specifications FiberHome SMF FiberHome Bending Insensitive Single-mode Fiber(FiberHome SMF) Optical Characteristics vs. Wavelength Max. α difference Dispersion coefficient G.657A2 Single-mode Fiber Features 1383nm(After H2-aging) 1490nm 1285~1330nm 1525~1575nm 1285~1340nm Zero dispersion wavelength 1300~1324 nm (nm.) (nm.) Zero dispersion slope (nm2.) PMD Maximum Individual Fiber Link Design Value(M=20,Q=0.01%) Typical value Cable cutoff wavelength λcc 1260 nm Mode Field Diameter(MFD) Point discontinuities 8.8± ±0.5 Geometrical Characteristics Cladding diameter 125±0.7 μm Cladding non-circularity 0.7 % Coating diameter 245±5 μm Coating-cladding concentricity error 12.0 μm Core-cladding concentricity error 0.5 μm Curl (radius) 4 m Delivery length 2.1~50.4 /reel Environmental Characteristics(, and ) Temperature dependence Induced at -60 ~+85 Temperature-humidity cycling Induced at -10 ~+85,98%RH Watersoak dependence Induced at 23,for 30 days Damp heat dependence Induced at 85 and 85%RH,for 30 days Dry heat at 85 Proof test 9.0 Macro-bend induced 10 turns Ф30mm 10 turns Ф30mm 1 turns Ф20mm 1 turns Ф20mm 1 turns Ф15mm 1 turns Ф15mm Coating strip force typical average force 1.5 Dynamic stress corrosion susceptibility parameter μm μm

7 FiberHome MMF FiberHome 62.5/125μm Multimode Fiber FiberHome MMF: 62.5/125μm Multimode Fiber 50/125μm Multimode Fiber ISO 9001specification Shanghai stock code: Description FiberHome 62.5/125μm multimode fiber is a graded index multimode optical fiber with a 62.5μm core diameter and a 125μm cladding diameter. The optical fiber si comprehensively optimized for performance at the 850nn and operating wavelengths. The fiber has the hightest bandwidth and lowest,which si satisfying the sue at 850nn and. FiberHome 62.5/125μm multimode fiber is designed and manufactured according to the most advanced level in the world. Application Due to the low and high bandwidth, FiberHome 62.5/125μm multimode fiber can be widely applied in local area networks(la), video, voice and data services.it's specially suited to Gigabit Ethernet(IEEE802.3z)using laser or light emitting diode(led)sources. Because of the advantages of the manufacturing process(pcvd), such as extremely refined refractive index(ri) profile control, stability,etc., FiberHome 62.5/125μm multimode fiber is one fo the fibers that offer the highest bandwidth available in the market. FiberHome 62.5/125μm multimode fiber si applicable in all cable types including ribbon cable,loose tube stranded cable, slotted core cable, unitube cable and tight buffer cable. FiberHome 62.5/125μm multimode fibers are compatible with fibers manufactured with other processes. orms FiberHome 62.5/125μm multimode fiber complies with or exceeds IEC A1b Optical Fiber Specification. FiberHome tightens many parameters of fiber products so as to offer more conveniences to customers. Characteristics Designed for use at and Low and high bandwidth, which overfills the transmission demand of IEEE802.3z Gigabit Ethernet Good protection and excellent strip force stability

8 FiberHome MMF FiberHome 62.5/125μm Multimode Fiber Product Specifications 62.5/125μm Multimode Fiber Features Optical Charactersistics A B C Minimum Modal Bandwidth umerical Aperture 0.275±0.015 Zero Dispersion Wavelength 1320~1365 nm Zero Dispersion Slope (nm2.) Group Refractive Index Backscatter Characteristics () Irregularities over fiber length and point discontinuity 0.1 uniformity 0.1 Step(Mean of bidirectional measurement) 0.1 Geometry Charactersistics Core Diameter 62.5±2.5 μm Core on-circularity 6.0 % Cladding Diameter 125±1 μm Cladding on-circularity 2.0 % Core/Cladding Concentricity Error 1.5 μm Coating Diameter 245±10 μm Coating/Cladding Concentricity Error 12.0 μm Delivery Length 1.1~17.6 /reel Environmental Characteristics ( 和 ) Temperature dependence induced -60 ~ Temperature-humidity cycling deduced -10 ~+85,98%RH 0.20 Watersoak dependence induced 23 ±2,30 days 0.20 Damp heat dependence induced 85 ±2 and85%rh,30 days 0.20 Dry heat aging 85 ± Proof test 9.0 Macrobend dependence induced 100 turns sф75mm & 0.5 Coating strip force Dynamic stress corrosion susceptibility parameter typical average force Peak force

9 FiberHome MMF FiberHome 50/125μm Multimode Fiber FiberHome MMF: 62.5/125μm Multimode Fiber 50/125μm Multimode Fiber ISO 9001specification Shanghai stock code: Description FiberHome 50/125μm multimode fiber is a graded index multimode optical fiber with a 50μm core diameter and a 125μm cladding diameter. The optical fiber si comprehensively optimized for performance at the 850nn and operating wavelengths. The fiber has the hightest bandwidth and lowest,which si satisfying the sue at 850nn and. FiberHome 50/125μm multimode fiber is designed and manufactured according to the most advanced level in the world. Application Due to the low and high bandwidth, FiberHome 50/125μm multimode fiber can be widely applied in local area networks(la), video, voice and data services. It's specially suited to Gigabit Ethernet(IEEE802.3z)using laser or light emitting diode(led)sources. Because of the advantages of the manufacturing process(pcvd), such as extremely refined refractive index(ri) profile control, stability, etc., FiberHome 50/125μm multimode fiber is one of the fibers that offer the highest bandwidth available in the market. FiberHome 50/125μm multimode fiber si applicable in all cable types including ribbon cable, loose tube stranded cable, slotted core cable, unitube cable and tight buffer cable. FiberHome 50/125μm multimode fibers are compatible with fibers manufactured with other processes. orms FiberHome 50/125μm multimode fiber complies with or exceeds IEC A1b Optical Fiber Specification. FiberHome tightens many parameters of fiber products so as to offer more conveniences to customers. Characteristics Designed for use at and Low and high bandwidth, which overfills the transmission demand of IEEE802.3z Gigabit Ethernet Good protection and excellent strip force stability

10 FiberHome MMF FiberHome 50/125μm Multimode Fiber Product Specifications 50/125μm Multimode Fiber Features Optical Charactersistics A B C Minimum Modal Bandwidth umerical Aperture 0.18~0.22 Zero Dispersion Wavelength 1295~1320 nm Zero Dispersion Slope Group Refractive Index 1295~ 1300~1320nm 0.001(λ0-1190) Backscatter Characteristics () Irregularities over fiber length and point discontinuity 0.1 uniformity 0.1 Step(Mean of bidirectional measurement) 0.1 Geometry Charactersistics Core Diameter 50±2.5 μm Core on-circularity 6.0 % Cladding Diameter 125±1 μm Cladding on-circularity 2.0 % Core/Cladding Concentricity Error 12.0 μm Coating Diameter 245±10 μm Coating/Cladding Concentricity Error 1.5 μm Delivery Length 1.1~17.6 /reel Environmental Characteristics ( 和 ) Temperature dependence induced -60 ~ Temperature-humidity cycling deduced -10 ~+85,98%RH 0.20 Watersoak dependence induced 23 ±2,30 days 0.20 Damp heat dependence induced 85 ±2 和 85%RH,30 days 0.20 Dry heat aging 85 ± Proof test 9.0 Macrobend dependence induced 100 turns sф75mm & 0.5 Coating strip force Dynamic stress corrosion susceptibility parameter typical average force Peak force

11 FiberHome OM3,ext Generation MMF FiberHome FFOT OM3 FiberHome FFOT OM3 FFOTOM3 150 FFOTOM3 300 FFOTOM3 550 MMF MMF MMF ISO 9001specification Shanghai stock code: Description FiberHome OM3 fiber is designed specifically for high speed local area network(la) such as Gigabit or higher speeds Ethernet. With the extremely refined refractive index profile owing to the optimized PCVD process, FiberHome OM3 fiber eliminates the differential mode delay(cmd) phenomenon observed on the conventional fibers in Gigabit applications. Thus, there si no need for expensive CMC compensation. FiberHome OM3 fibers satisfy the sue at and. The maximum link distances(up to 2000 meter) for Gigabit Ethernet system are the longest distances available in the world. Application The outstanding optical performance of FiberHome OM3 fibers makes it suitable for applications including not only high speed LA but also lower bit rate systems such as FDDI, Ethernet, ATM,etc. FiberHome OM3 fibers support up to 2000 meter of link distances for lower bit rate systems. A wide variety of light sources can be sued in combination with FiberHome OM3 fibers, such as LEDs, VCSELs, 780nm CD lasers and Fabry Perot lasers. FiberHome OM3 fiber is applicable in all cable types including ribbon cable, loose tube stranded cable, slotted core cable, unitube cable and tight buffer cable. orms FiberHome OM3 fiber complies with or exceeds ITU T Recommendation G.651 and IEC793 2 type A1 Optical Fiber Specification. Characteristics Designed for use at and Suited to applications in Gigabit Ethernet and higher bit rat systems o need to use expensive DMD compensation in Gigabit Ethernet Enabling the longest link distances compared with congener products Good protection and excellent strip force stability

12 Product Specifications: FFOT OM3 150 Specifications FiberHome,ext Generation MMF FiberHome FFOT OM3 ew Generation 50/125μm MMF FFOT OM3-150 Features Optical Charactersistics Overfilled Launch Bandwidth 700 Effective Modal Bandwidth Gb/s Ethernet link length 150 m umerical Aperture 0.185~0.215 DMD Specification The following conditions provides a minimum bandwidth guarantee : 1.Transmission wavelength range 840~860nm 2.4.5μm within the radius of the regional flux 30%,19μm within the radius of the regional flu 86% Group Refractive Index DMD DMD Internal standard Internal standard (m) (m) (radius 5~18μm) (radius 0~23μm) Zero Dispersion Wavelength 1295~1320 nm Zero Dispersion Slope 1295~ 0.001(λ0-1190) 1300~1320nm 0.11 Backscatter Characteristics () Irregularities over fiber length and point discontinuity 0.1 uniformity 0.1 Step(Mean of bidirectional measurement) 0.1 Geometry Charactersistics Core Diameter 50±2.5 μm Core on-circularity 6.0 % Cladding Diameter 125±2 μm Cladding on-circularity 2.0 % Core/Cladding Concentricity Error 1.5 μm Coating Diameter 245±10 μm Coating/Cladding Concentricity Error 12.0 μm Delivery Length 1.1~8.8 /reel Environmental Characteristics( and ) Temperature dependence induced -60 ~ Temperature-humidity cycling deduced -10 ~+85,98%RH 0.20 Watersoak dependence induced 23 ±2,30 days 0.20 Damp heat dependence induced 85 ±2 and 85%RH,30 days 0.20 Dry heat aging 85 ± Proof test 9.0 Macrobend dependence induced 100 turns Ф75mm & 0.5 Coating strip force typical average force 1.4 Dynamic stress corrosion susceptibility parameter OTE: 1.Luminous flux means the source conditions according to TIA/EIA-492AAAC or IEC regarding the A1a.2 fiber category 2.Tests are based on TIA/EIA standards

13 FiberHome,ext Generation MMF FiberHome FFOT OM3 Product Specifications: FFOT OM3 300 Specifications ext Generation 50/125μm MMF FFOT OM3-300 Features Optical Charactersistics Overfilled Launch Bandwidth 1500 Effective Modal Bandwidth Gb/s Ethernet link length 300 m umerical Aperture 0.185~0.215 DMD Specification See FFOT OM3-300 Internal Standard Group Refractive Index Zero Dispersion Wavelength 1295~1320 nm Zero Dispersion Slope 1295~ 0.001(λ0-1190) 1300~1320nm 0.11 Backscatter Characteristics () Irregularities over fiber length and point discontinuity 0.1 uniformity 0.1 Step(Mean of bidirectional measurement) 0.1 Geometry Charactersistics Core Diameter 50±2.5 μm Core on-circularity 6.0 % Cladding Diameter 125±2 μm Cladding on-circularity 2.0 % Core/Cladding Concentricity Error 1.5 μm Coating Diameter 245±10 μm Coating/Cladding Concentricity Error 12.0 μm Delivery Length 1.1~8.8 /reel Environmental Characteristics( 和 ) Temperature dependence induced -60 ~ Temperature-humidity cycling deduced -10 ~+85,98%RH 0.20 Watersoak dependence induced 23 ±2,30 days 0.20 Damp heat dependence induced 85 ±2 and 85%RH,30 days 0.20 Dry heat aging 85 ± Proof test 9.0 Macrobend dependence induced 100 turns Ф75mm & 0.5 Coating strip force typical average force 1.4 Peak force Dynamic stress corrosion susceptibility parameter

14 Product Specifications: FFOTOM3 550 Specifications FiberHome,ext Generation MMF FiberHome FFOT OM3 Optical Charactersistics Overfilled Launch Bandwidth Effective Modal Bandwidth ew Generation 50/125μm MMF FFOT OM3-550 Features Gb/s Ethernet link length 550 m umerical Aperture DMD Specification Group Refractive Index ~0.215 See FFOTOM3-550 Internal Standard Zero Dispersion Wavelength 1295~1320 nm Zero Dispersion Slope Backscatter Characteristics () Irregularities over fiber length and point discontinuity 1295~ 1300~1320nm 0.001(λ0-1190) uniformity 0.1 Step(Mean of bidirectional measurement) 0.1 Geometry Charactersistics Core Diameter 50±2.5 μm Core on-circularity 6.0 % Cladding Diameter 125±2 μm Cladding on-circularity 2.0 % Core/Cladding Concentricity Error 1.5 μm Coating Diameter 245±10 μm Coating/Cladding Concentricity Error 12.0 μm Delivery Length 1.1~8.8 /reel Environmental Characteristics( and ) Temperature dependence induced Temperature-humidity cycling deduced Watersoak dependence induced Damp heat dependence induced -60 ~ ~+85,98%RH ±2,30 days ±2 and 85%RH,30 days 0.20 Dry heat aging 85 ± Proof test 9.0 Macrobend dependence induced 100 turns Ф75mm Coating strip force Dynamic stress corrosion susceptibility parameter & 0.5 typical average force Peak force

15 FiberHome FFOT OM3 FFOTOM3-300 and FFOTOM3-550 Internal Standards FiberHome,ext Generation MMF ext Generation 50/125μm Multimode Fiber FFOT OM3-300 Internal Standard o. DMD Internal Standard(m)(radius 5~18μm) DMD Internal Standard(m)(radius 0~23μm) OTE 1: DMD Specification The following conditions provides a minimum bandwidth guarantee : 1.Transmission wavelength range 840~860nm 2.4.5μm within the radius of the regional flux 30%,19μm within the radius of the regional flu 86% 3.Luminous flux means the source conditions according to TIA/EIA-492AAAC or IEC regarding the A1a.2 fiber category 4.Tests are based on TIA/EIA standards o. ext Generation 50/125μm Multimode Fiber FFOT OM3-550 Internal Standard DMD Internal Standard (m)(radius 5~18μm) DMD Internal Standard (m)(radius 0~23μm) DMD Internal Standard (m)(radius 0~18μm) OTE 2: DMD Specification The following conditions provides a minimum bandwidth guarantee : 1.Transmission wavelength range 840~860nm 2.4.5μm within the radius of the regional flux 30%,19μm within the radius of the regional flu 86% 3.Luminous flux means the source conditions according to TIA/EIA-492AAAC or IEC regarding the A1a.2 fiber category 4.Tests are based on TIA/EIA standards FFOT OM3-300 and FFOT OM3-550 adding internal standards radium(μm) OM OM

JFOC-BSG2D MODEL:JFOC-BSG2D. optic.com. For detailed inquiry please contact our sales team at:

JFOC-BSG2D MODEL:JFOC-BSG2D. optic.com. For detailed inquiry please contact our sales team at: JFOC-BSG2D MODEL:JFOC-BSG2D For detailed inquiry please contact our sales team at: market@jfiber optic.com Description : JFOC-BSG2D dispersion unshifted singlemode fiber is designed specially for optical

More information

ENDLESS INNOVATION OPTICAL FIBER. Bendfree Bendfree+ UltraPass. WidePass. Ultra Bendfree

ENDLESS INNOVATION OPTICAL FIBER. Bendfree Bendfree+ UltraPass. WidePass. Ultra Bendfree ENDLESS INNOVATION Today, vast amounts of information are running across the transmission at extremely high speeds. OPTICAL FIBER Samsung offers a full line of optical fibers for all network applications,

More information

SPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -SR15E)

SPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -SR15E) Fujikura DATE Aug. 18, 2008 NO. JFS-00052A Supersedes JFS-00052 Messrs. SPECIFICATION FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -SR15E) Prepared by H. KIKUCHI Manager Optical Fiber and Cable Dept. Global

More information

SPECIFICATION. Optical Fiber Cable

SPECIFICATION. Optical Fiber Cable SPECIFICATION Optical Fiber Cable (GYDXTW 24~432) Prepared by Zhang xin Approved by Yao qiang 1 General 11 This specification covers the requirements for the supply of single-mode optical fiber cables

More information

ZHONGTIAN TECHNOLOGIES CO., LTD ZHONGTIAN TECHNOLOGIES FIBER OPTICS CO., LTD

ZHONGTIAN TECHNOLOGIES CO., LTD ZHONGTIAN TECHNOLOGIES FIBER OPTICS CO., LTD ZHONGTIAN TECHNOLOGIES CO., LTD ZHONGTIAN TECHNOLOGIES FIBER OPTICS CO., LTD Brief Introduction ZhongTian Technologies Fiber Optics Company Limited (hereafter called ZFOC), a subsidiary company of Jiangsu

More information

OFS AllWave non-dispersion shifted single-mode optical fiber

OFS AllWave non-dispersion shifted single-mode optical fiber The New Standard for Single-Mode Fiber! Product Description OFS AllWave non-dispersion shifted single-mode optical fiber (NDSF) is the industry s first Full-Spectrum fiber designed for optical transmission

More information

ETK Kablo SPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -LWP)

ETK Kablo SPECIFICATION. FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -LWP) JFT-02857A 1/7 DATE Feb. 22, 2013 NO. JFT-02857A Supersedes JFT-02857 Messrs. ETK Kablo SPECIFICATION FOR SINGLE-MODE OPTICAL FIBER (FutureGuide -LWP) Prepared by H. KIKUCHI Manager Optical Fiber and Cable

More information

Standard Monotube SAFE

Standard Monotube SAFE Application Mainly used in outside plant to building transitions and inter-building installations Fiber Count Single Mode Fibers Outer Diameter [mm] Cable Weight [kg/km] Design Optical Fibers Gel-filled

More information

Outdoor, Fig 8 Armored, Multi Tube

Outdoor, Fig 8 Armored, Multi Tube Outdoor, Fig 8 Armored, Multi Tube Outdoor stranded Fig 8 Armored, Fiber optic cable for aerial installation. It support application such as IEEE802.3, 10G Ethernet, Gigabit Ethernet, Fast Ethernet, Ethernet,

More information

GYFY-24FO Total Dry. Item Material Description PE outer sheath HDPE Nominal thickness:1.8mm

GYFY-24FO Total Dry. Item Material Description PE outer sheath HDPE Nominal thickness:1.8mm GYFY-24FO Total Dry Filler FRP center strength member Strength member Rip cord Dielectric strength members Aramid yarns Additional strength member Filler PP Diameter same as tube Colors of tubes is : blue,

More information

LSSS-OF FOR. Zero Water Peak Single-Mode Optical Fiber. (Reference: ITU-T G.652.D) Prepared by Eun Kyung Min Engineer Passive Solution Team

LSSS-OF FOR. Zero Water Peak Single-Mode Optical Fiber. (Reference: ITU-T G.652.D) Prepared by Eun Kyung Min Engineer Passive Solution Team PAGE : 1 OF 6 LSSS-OF0007-00 FOR Zero Water Peak Single-Mode Optical Fiber (Reference: ITU-T G.652.D) Prepared by Eun Kyung Min Engineer Passive Solution Team Checked by Yu-Hyoung Lee Manager Passive Solution

More information

Outdoor, CCTV or CCTV, Fig 8 Armored.

Outdoor, CCTV or CCTV, Fig 8 Armored. Outdoor, CCTV or CCTV, Fig 8 Armored. Outdoor stranded Fig 8 Armored, Fiber optic cable for aerial installation. It support application such as IEEE802.3, 10G Ethernet, Gigabit Ethernet, Fast Ethernet,

More information

Optical Fiber Cable. MODEL:GYTA53 PE Jacket. optic.com. For detailed inquiry please contact our sales team at:

Optical Fiber Cable. MODEL:GYTA53 PE Jacket. optic.com. For detailed inquiry please contact our sales team at: Optical Fiber Cable For detailed inquiry please contact our sales team at: MODEL:GYTA53 PE Jacket market@jfiber optic.com Form one single mode fiber:g.655 Characteristics Conditions Specified Values Units

More information

ADSS Fiber Optic Cable. DESCRIPTION core, Single-mode/Multi-mode. Version: V2.0

ADSS Fiber Optic Cable. DESCRIPTION core, Single-mode/Multi-mode. Version: V2.0 ITEM MODEL NO. ADSS Fiber Optic Cable A-288-XX DESCRIPTION 2-288 core, Single-mode/Multi-mode Overview AOA-ADSS cable is ideal for installation in distribution as well as transmission environments, even

More information

Nufern 980 nm Select Cut-Off Single-Mode Fiber

Nufern 980 nm Select Cut-Off Single-Mode Fiber Nufern 980 nm Select Cut-Off Single-Mode Fiber Nufern s 980 nm high-performance select cut-off single-mode fibers are optimized for use by component manufacturers in the telecommunications wavelengths.

More information

How Bend Insensitive Multimode Fiber is Affecting Installation and Testing of Enterprise and Data Center Cabling

How Bend Insensitive Multimode Fiber is Affecting Installation and Testing of Enterprise and Data Center Cabling How Bend Insensitive Multimode Fiber is Affecting Installation and Testing of Enterprise and Data Center Cabling David Mazzarese, Technical Manager, Fiber Systems and Standards Engineering, OFS Learning

More information

White Paper: The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need for Encircled Flux

White Paper: The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need for Encircled Flux White Paper: The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need for Encircled Flux White Paper: The Ins and Outs of Testing Bend Insensitive Multimode Fiber (BIMMF): The Need

More information

Single-Armored Cables, Fibers

Single-Armored Cables, Fibers Features and Benefits Fully waterblocked loose tube, gel-free design Simple access and no clean up Single-armored construction Provides additional crush and rodent protection High-strength ripcord Ease

More information

Bending the Truth - Get the straight story about Corning ClearCurve multimode fibers

Bending the Truth - Get the straight story about Corning ClearCurve multimode fibers Bending the Truth - Get the straight story about Corning ClearCurve multimode fibers WP6372 Issued: January 211 Introduction In 29, Corning introduced ClearCurve multimode fiber, the first standards compliant

More information

One Enterprise. One Infrastructure. One Partner. Optical Fiber Loss Testing. Optical loss testing in the field is not as simple as it seems.

One Enterprise. One Infrastructure. One Partner. Optical Fiber Loss Testing. Optical loss testing in the field is not as simple as it seems. Optical loss testing in the field is not as simple as it seems. Abstract Optical Fiber Loss Testing Optical loss testing of multimode fiber can be affected by many variables, including fiber mismatch,

More information

Data sheet OpDAT connection cable 2x1 OS2 - bend insensitive

Data sheet OpDAT connection cable 2x1 OS2 - bend insensitive Illustrations Principle diagram Page 1/7 Product specification connection cable for direct connector termination with higher robustness cable structure: I-V(ZN)HH2, duplex patch cable with additional outer

More information

ALTOS Lite Gel-Free, Single-Jacket, Single-Armored Cables, Fibers

ALTOS Lite Gel-Free, Single-Jacket, Single-Armored Cables, Fibers Features and Benefits Fully waterblocked loose tube, gel-free design Simple access and no clean up Single-armored construction Provides additional crush and rodent protection High-strength ripcord Ease

More information

HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.

HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş. Technical Specification Revision/Date:01/02.15 By S.Erol Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSLT41DYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657 A2

More information

Multimode Fiber Characterization Encircled Flux & Launch Condition Considerations

Multimode Fiber Characterization Encircled Flux & Launch Condition Considerations Application Note Multimode Fiber Characterization Encircled Flux & Launch Condition Considerations Introduction Current communication data rates in local networks range from 10/100 Mbps for Ethernet to

More information

NEW YORK CITY COLLEGE of TECHNOLOGY

NEW YORK CITY COLLEGE of TECHNOLOGY NEW YORK CITY COLLEGE of TECHNOLOGY THE CITY UNIVERSITY OF NEW YORK DEPARTMENT OF ELECTRICAL AND TELECOMMUNICATIONS ENGINEERING TECHNOLOGY Course : Prepared by: TCET 4102 Fiber-optic communications Module

More information

OpDAT Universalkabel 1x4 OM4 - biegeunempfindlich, Klasse. Principle diagram

OpDAT Universalkabel 1x4 OM4 - biegeunempfindlich, Klasse. Principle diagram Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification installation cable U-DQ(ZN)BH universal fiber optic cable for indoors/outdoors with central or

More information

Fiber Optic Communication Systems. Unit-05: Types of Fibers. https://sites.google.com/a/faculty.muet.edu.pk/abdullatif

Fiber Optic Communication Systems. Unit-05: Types of Fibers. https://sites.google.com/a/faculty.muet.edu.pk/abdullatif Unit-05: Types of Fibers https://sites.google.com/a/faculty.muet.edu.pk/abdullatif Department of Telecommunication, MUET UET Jamshoro 1 Optical Fiber Department of Telecommunication, MUET UET Jamshoro

More information

TECHNICAL DATASHEET FOR LOOSE TUBE OPTICAL FIBER CABLE. Air Blown Micro LC Cable

TECHNICAL DATASHEET FOR LOOSE TUBE OPTICAL FIBER CABLE. Air Blown Micro LC Cable TECHNICAL DATASHEET FOR LOOSE TUBE OPTICAL FIBER CABLE Air Blown Micro LC Cable ITU-T G.652.D 6~72F Customer : Czech Atlantis Date : Oct. 31. 2007 Author : MinLi Fu Manager : HanDong Choi Department :

More information

Ø560*336mm 4.25 kg 2100 ± 105m

Ø560*336mm 4.25 kg 2100 ± 105m GUMT Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)H Standard Rodent Protection 05-0-0 v3.0 Ordering Information Belden Part Numbers Fibre Description / count 4 6 8 6 4 6.5/5-OM

More information

Guided Propagation Along the Optical Fiber. Xavier Fernando Ryerson Comm. Lab

Guided Propagation Along the Optical Fiber. Xavier Fernando Ryerson Comm. Lab Guided Propagation Along the Optical Fiber Xavier Fernando Ryerson Comm. Lab The Nature of Light Quantum Theory Light consists of small particles (photons) Wave Theory Light travels as a transverse electromagnetic

More information

WHITE PAPER LINK LOSS BUDGET ANALYSIS TAP APPLICATION NOTE LINK LOSS BUDGET ANALYSIS

WHITE PAPER LINK LOSS BUDGET ANALYSIS TAP APPLICATION NOTE LINK LOSS BUDGET ANALYSIS TAP APPLICATION NOTE LINK LOSS BUDGET ANALYSIS WHITE PAPER JULY 2017 1 Table of Contents Basic Information... 3 Link Loss Budget Analysis... 3 Singlemode vs. Multimode... 3 Dispersion vs. Attenuation...

More information

GUXW. Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor, Steel Wire Armor (SWA) A/I-VQ(ZN)HBH Full Rodent Protection v5.

GUXW. Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor, Steel Wire Armor (SWA) A/I-VQ(ZN)HBH Full Rodent Protection v5. GUXW Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor, Steel Wire Armor (SWA) A/I-VQ(ZN)HBH Full Rodent Protection 05--0 v5.0 Ordering Information Belden Part Numbers Fibre Description / count

More information

Data sheet OpDAT breakout cable 24x1 OM4 - bend insensitive

Data sheet OpDAT breakout cable 24x1 OM4 - bend insensitive Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification connection cable I-V(ZN)HH breakout cable for direct connector termination for indoors and outdoors

More information

How to Speak Fiber Geek Article 2 Critical Optical Parameters Attenuation

How to Speak Fiber Geek Article 2 Critical Optical Parameters Attenuation Article 2 Critical Optical Parameters Attenuation Welcome back, Fiber Geeks! Article 1 in this series highlighted some bandwidth demand drivers and introductory standards information. The article also

More information

Measurement Considerations for Corning ClearCurve LBL and ZBL Optical Fiber

Measurement Considerations for Corning ClearCurve LBL and ZBL Optical Fiber Measurement Considerations for Corning ClearCurve LBL and ZBL Optical Fiber AN6017 Issued: May 2012 Corning ClearCurve LBL optical fiber and Corning ClearCurve ZBL optical fiber provide low loss to bend

More information

Migration to 50/125 µm in the Local Area Network

Migration to 50/125 µm in the Local Area Network Migration to 50/125 µm in the Local Area Network By Doug Coleman Introduction Enterprise local area networks (LAN) should be designed to support legacy applications as well as emerging high-data-rate applications.

More information

There are lots of problems or challenges with fiber, Attenuation, Reflections, Dispersion and so on. So here we will look at these problems.

There are lots of problems or challenges with fiber, Attenuation, Reflections, Dispersion and so on. So here we will look at these problems. The Hard theory The Hard Theory An introduction to fiber, should also include a section with some of the difficult theory. So if everything else in the book was very easily understood, then this section

More information

GAAG. Multi Loose Tube Cables Outdoor - ADSS A-DQ(ZN)2Y(T) v4.0. Ordering Information. Applications. Features & Benefits

GAAG. Multi Loose Tube Cables Outdoor - ADSS A-DQ(ZN)2Y(T) v4.0. Ordering Information. Applications. Features & Benefits GAAG Multi Loose Tube Cables Outdoor - ADSS A-DQ(ZN)Y(T) 05-04-9 v4.0 Ordering Information Belden Part Numbers Fibre Description / count 4 8 8 4 30 36 6.5/5-OM GAAG04 GAAG08 GAAG GAAG8 GAAG4 GAAG30 GAAG36

More information

features and benefits

features and benefits features and benefits Fully waterblocked loose tube, gel-free design Medium-density polyethylene jacket Figure-8 cable design Available in 62.5 µm, 50 µm, single-mode and hybrid versions Simple access

More information

Guided Propagation Along the Optical Fiber

Guided Propagation Along the Optical Fiber Guided Propagation Along the Optical Fiber The Nature of Light Quantum Theory Light consists of small particles (photons) Wave Theory Light travels as a transverse electromagnetic wave Ray Theory Light

More information

SPECIFICATION FOR SINGLE-MODE OPTICAL FIBRES

SPECIFICATION FOR SINGLE-MODE OPTICAL FIBRES SINGLE-MODE OPTICAL FIBRES SPECIFICATION FOR SINGLE-MODE OPTICAL FIBRES SPC-00571 JUNE 2006 Revision 3.00 NON-DISCLOSURE OF INFORMATION Information contained in this document is proprietary in nature and/or

More information

Industrial Automation

Industrial Automation OPTICAL FIBER. SINGLEMODE OR MULTIMODE It is important to understand the differences between singlemode and multimode fiber optics before selecting one or the other at the start of a project. Its different

More information

GORN. Central Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection, 1000N Permanent Load v6.0. Ordering Information

GORN. Central Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection, 1000N Permanent Load v6.0. Ordering Information GORN Central Loose Tube Cables Outdoor A-DQ(ZN)BY Improved Rodent Protection, 000N Permanent Load 05--0 v6.0 Ordering Information Belden Part Numbers Fibre Description / count 4 6 8 6 4 6.5/5-OM GORN0

More information

Fiber Optic Principles. Oct-09 1

Fiber Optic Principles. Oct-09 1 Fiber Optic Principles Oct-09 1 Fiber Optic Basics Optical fiber Active components Attenuation Power budget Bandwidth Oct-09 2 Reference www.flukenetworks.com/fiber Handbook Fiber Optic Technologies (Vivec

More information

Total care for networks. Introduction to Dispersion

Total care for networks. Introduction to Dispersion Introduction to Dispersion Introduction to PMD Version1.0- June 01, 2000 Copyright GN Nettest 2000 Introduction To Dispersion Contents Definition of Dispersion Chromatic Dispersion Polarization Mode Dispersion

More information

Ø 1250 * 688 mm 93 kg ± 105m

Ø 1250 * 688 mm 93 kg ± 105m GCDE Multi Loose Tube Cables Universal Indoor / Outdoor - Corrugated Steel Tape Armor (CST) A/I-DQ(ZN)H(SR)H Full Rodent Protection 05-05-5 v7.0 Ordering Information Belden Part Numbers Fibre Description

More information

Lectureo5 FIBRE OPTICS. Unit-03

Lectureo5 FIBRE OPTICS. Unit-03 Lectureo5 FIBRE OPTICS Unit-03 INTRODUCTION FUNDAMENTAL IDEAS ABOUT OPTICAL FIBRE Multimode Fibres Multimode Step Index Fibres Multimode Graded Index Fibres INTRODUCTION In communication systems, there

More information

Guided Propagation Along the Optical Fiber. Xavier Fernando Ryerson University

Guided Propagation Along the Optical Fiber. Xavier Fernando Ryerson University Guided Propagation Along the Optical Fiber Xavier Fernando Ryerson University The Nature of Light Quantum Theory Light consists of small particles (photons) Wave Theory Light travels as a transverse electromagnetic

More information

Optical Fiber Technology. Photonic Network By Dr. M H Zaidi

Optical Fiber Technology. Photonic Network By Dr. M H Zaidi Optical Fiber Technology Numerical Aperture (NA) What is numerical aperture (NA)? Numerical aperture is the measure of the light gathering ability of optical fiber The higher the NA, the larger the core

More information

UNIT-II : SIGNAL DEGRADATION IN OPTICAL FIBERS

UNIT-II : SIGNAL DEGRADATION IN OPTICAL FIBERS UNIT-II : SIGNAL DEGRADATION IN OPTICAL FIBERS The Signal Transmitting through the fiber is degraded by two mechanisms. i) Attenuation ii) Dispersion Both are important to determine the transmission characteristics

More information

Optical Fiber Jelly. PBT loose tube. PE shealth. Aramid Yarn SINGLE MODE OPTICAL FIBER ITU-T REC. G.652D

Optical Fiber Jelly. PBT loose tube. PE shealth. Aramid Yarn SINGLE MODE OPTICAL FIBER ITU-T REC. G.652D SINGLE MODE OPTICAL FIBER ITU-T REC. G.652D Product Model: GYFXTY 2~12C Our Ref: No.TS-FT201107-03-64-V1.0 GENERAL 1.1 These optical cables have excellent protection, optical transmission and mechanical

More information

ITU-T G.656. Characteristics of a fibre and cable with non-zero dispersion for wideband optical transport

ITU-T G.656. Characteristics of a fibre and cable with non-zero dispersion for wideband optical transport International Telecommunication Union ITU-T G.656 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (12/2006) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics

More information

Lecture 10. Dielectric Waveguides and Optical Fibers

Lecture 10. Dielectric Waveguides and Optical Fibers Lecture 10 Dielectric Waveguides and Optical Fibers Slab Waveguide, Modes, V-Number Modal, Material, and Waveguide Dispersions Step-Index Fiber, Multimode and Single Mode Fibers Numerical Aperture, Coupling

More information

Variation in Multimode Fiber Response: Summary of Experimental Results

Variation in Multimode Fiber Response: Summary of Experimental Results Summary of Experimental Results IEEE P802.3aq 10GBASE-LRM, Task Group 4 November, 2004, San Antonio Infineon Fiber Optics, Infineon Fiber Optics Page 1 Summary of Experimental Results! Introduction A variation

More information

Exhibit A Construction Project Manual and Drawings

Exhibit A Construction Project Manual and Drawings Exhibit A Construction Project Manual and Drawings Summary Starting the summer of 2015 TxDOT will be adding a Toll lane to Hwy 288 with fly over exits and entrances in the area of Holcombe Blvd. and Ardmore

More information

Spiral Launch Method for Enhanced MMF Bandwidth

Spiral Launch Method for Enhanced MMF Bandwidth Spiral Launch Method for Enhanced MMF Bandwidth D. Vernooy and H. Blauvelt Xponent Photonics March 2004 IEEE 802.2 10Gb/s on FDDI-grade MM fiber Study Group hblauvelt@xponentinc.com 1 Outline I. Overview

More information

ekсkoм TECHNICAL DATA SHEET FOR Duct/Aerial Application kabeli.eu (SM 24 Fibers) Technical literature for Optical Fiber Cable

ekсkoм TECHNICAL DATA SHEET FOR Duct/Aerial Application kabeli.eu (SM 24 Fibers) Technical literature for Optical Fiber Cable TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct/Aerial Application (SM 24 Fibers) kabeli.eu ekсkoм CATV, LAN, GEPON, SECURITY Page 1 of 6 1. Cable Construction 1.1 Cable cross-section 2.

More information

IEEE July 2001 Plenary Meeting Portland, OR Robert S. Carlisle Sr. Market Development Engineer

IEEE July 2001 Plenary Meeting Portland, OR Robert S. Carlisle Sr. Market Development Engineer Ethernet PON Fiber Considerations IEEE July 2001 Plenary Meeting Portland, OR Robert S. Carlisle Sr. Market Development Engineer Special Thanks to Contributors Kendall Musgrove - Sr. Market Development

More information

Advanced Fibre Testing: Paving the Way for High-Speed Networks. Trevor Nord Application Specialist JDSU (UK) Ltd

Advanced Fibre Testing: Paving the Way for High-Speed Networks. Trevor Nord Application Specialist JDSU (UK) Ltd Advanced Fibre Testing: Paving the Way for High-Speed Networks Trevor Nord Application Specialist JDSU (UK) Ltd Fibre Review Singlemode Optical Fibre Elements of Loss Fibre Attenuation - Caused by scattering

More information

Outside Plant All Dielectric

Outside Plant All Dielectric Berk-Tek s Outside Plant Loose Tube ber optic cables are designed for installation in harsh enviroments such as direct burial, aerial lashing, conduit and pathways that are subjected to wide temperature

More information

Fiber Optic Communications Communication Systems

Fiber Optic Communications Communication Systems INTRODUCTION TO FIBER-OPTIC COMMUNICATIONS A fiber-optic system is similar to the copper wire system in many respects. The difference is that fiber-optics use light pulses to transmit information down

More information

Why Using Fiber for transmission

Why Using Fiber for transmission Why Using Fiber for transmission Why Using Fiber for transmission Optical fibers are widely used in fiber-optic communications, where they permit transmission over long distances and at very high bandwidths.

More information

GIGABIT ETHERNET. e-ready Building Next Generation IT infrastructures. The Cabling Partnership. Mike Gilmore Managing Director, e-ready Building

GIGABIT ETHERNET. e-ready Building Next Generation IT infrastructures. The Cabling Partnership. Mike Gilmore Managing Director, e-ready Building Mike Gilmore Managing Director, Mike Gilmore Standards Activities Member: ISO/IEC JTC1 SC25 WG3: Generic Cabling ISO/IEC JTC1 SC25 Project Team: SOHO Convenor: ISO/IEC JTC1 SC25 WG3 IPTG: Industrial Premises

More information

INTERNATIONAL TELECOMMUNICATION UNION TRANSMISSION MEDIA CHARACTERISTICS CHARACTERISTICS OF A DISPERSION-SHIFTED SINGLE-MODE OPTICAL FIBRE CABLE

INTERNATIONAL TELECOMMUNICATION UNION TRANSMISSION MEDIA CHARACTERISTICS CHARACTERISTICS OF A DISPERSION-SHIFTED SINGLE-MODE OPTICAL FIBRE CABLE INTERNATIONAL TELECOMMUNICATION UNION ITU-T G.653 TELECOMMUNICATION (03/93) STANDARDIZATION SECTOR OF ITU TRANSMISSION MEDIA CHARACTERISTICS CHARACTERISTICS OF A DISPERSION-SHIFTED SINGLE-MODE OPTICAL

More information

SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media and optical systems characteristics Optical fibre cables

SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media and optical systems characteristics Optical fibre cables I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.652 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (11/2016) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND

More information

3M Clear Track Hallway Fiber Pathway

3M Clear Track Hallway Fiber Pathway Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant

More information

Multimode fiber media types for 802.3cd

Multimode fiber media types for 802.3cd 1 Multimode fiber media types for 802.3cd P802.3cd, Fort Worth, Texas September 12-16, 2016 Rick Pimpinella Jose Castro Brett Lane Panduit Labs, Panduit Corp. 2 Laser Optimized Multimode Fiber Types Fiber

More information

HIGH BIT RATE OPTICAL FIBRE NETWORKS - optical fibre selection and implementation

HIGH BIT RATE OPTICAL FIBRE NETWORKS - optical fibre selection and implementation HIGH BIT RATE OPTICAL FIBRE NETWORKS - optical fibre selection and implementation prepared and delivered by ϕ 19th January 2000 PO Box MT65 LEEDS LS17 8YD UK Tel: +44 (0) 113 232 3721 Fax: +44 (0) 113

More information

is a method of transmitting information from one place to another by sending light through an optical fiber. The light forms an electromagnetic

is a method of transmitting information from one place to another by sending light through an optical fiber. The light forms an electromagnetic is a method of transmitting information from one place to another by sending light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information. The

More information

Improvements to Modal Noise Penalty Calculations

Improvements to Modal Noise Penalty Calculations Improvements to Modal Noise Penalty Calculations Petar Pepeljugoski, Daniel Kuchta and Aleksandar Risteski IBM T.J. Watson Research Center Yorktown Heights, NY 1598 Outline Modal Noise (MN) penalty calculation

More information

Fiber Optics IV - Testing

Fiber Optics IV - Testing PDHonline Course E311 (3 PDH) Fiber Optics IV - Testing Instructor: Lee Layton, PE 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org

More information

Comparison of FRD (Focal Ratio Degradation) for Optical Fibres with Different Core Sizes By Neil Barrie

Comparison of FRD (Focal Ratio Degradation) for Optical Fibres with Different Core Sizes By Neil Barrie Comparison of FRD (Focal Ratio Degradation) for Optical Fibres with Different Core Sizes By Neil Barrie Introduction The purpose of this experimental investigation was to determine whether there is a dependence

More information

τ mod = T modal = longest ray path shortest ray path n 1 L 1 = L n 2 1

τ mod = T modal = longest ray path shortest ray path n 1 L 1 = L n 2 1 S. Blair February 15, 2012 23 2.2. Pulse dispersion Pulse dispersion is the spreading of a pulse as it propagates down an optical fiber. Pulse spreading is an obvious detrimental effect that limits the

More information

TECHNICAL ARTICLE: DESIGN BRIEF FOR INDUSTRIAL FIBRE OPTICAL NETWORKS

TECHNICAL ARTICLE: DESIGN BRIEF FOR INDUSTRIAL FIBRE OPTICAL NETWORKS TECHNICAL ARTICLE: DESIGN BRIEF FOR INDUSTRIAL FIBRE OPTICAL NETWORKS Designing and implementing a fibre optical based communication network intended to replace or augment an existing communication network

More information

Optical Characteristics of a Reduced Bending-Loss Fiber with a Bending Radius of 5 mm

Optical Characteristics of a Reduced Bending-Loss Fiber with a Bending Radius of 5 mm Optical Characteristics of a Reduced Bending-Loss Fiber with a Bending Radius of 5 Tomofumi Arai, 1 Kentaro Ichii, 1 Nobuo Oozeki, 1 Yasuko Sugimoto, 1 and Shoichiro Matsuo 1 With the worldwide popularization

More information

Trends in Optical Transceivers:

Trends in Optical Transceivers: Trends in Optical Transceivers: Light sources for premises networks Peter Ronco Corning Optical Fiber Asst. Product Line Manager Premises Fibers January 24, 2006 Outline: Introduction: Transceivers and

More information

af-phy July 1996

af-phy July 1996 155.52 Mbps Short Wavelength Physical Layer Specification af-phy-0062.000 Technical Committee 155.52 Mbps Physical Layer Interface Specification for Short Wavelength Laser af-phy-0062.000 July 1996 1 ATM

More information

Volume 2, Issue 11, November 2014 ISSN

Volume 2, Issue 11, November 2014 ISSN Experimental Investigation of Bending Loss in Multimode optical fiber used for the Delivery of Optical Power From Sources at 650nm and 532nm Wavelength Samar Y. Al Dabagh 1 and Duaa H. Al Saud 1 1 Department

More information

CommunicationCables FIBER OPTICS OPGW FTTH

CommunicationCables FIBER OPTICS OPGW FTTH CommunicationCables FIBER OPTICS OPGW FTTH Contents FIBER OPTICS 4 OPGW 34 FTTH 38 APPENDIX 54 CONNECTING THE WORLD BY TAIHAN COMMUNICATION CABLES TAIHAN has served a pivotal role in establishing communication

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET PERFORMANCE SPECIFICATION SHEET METRIC MIL-PRF-49291/11B w/amendment 2 19 July 2016 SUPERSEDING MIL-PRF-49291/11B w/amendment 1 19 November 2015 FIBER, OPTICAL, TYPE II, CLASS 5, SIZE II, COMPOSITION A,

More information

TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Direct Burial Application

TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Direct Burial Application TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Direct Burial Application (SM 12 Fibers) Product: Single Mode Optical Fiber Cable Customer: Date: Write by: Kevin Zhou / technical engineer International

More information

The absorption of the light may be intrinsic or extrinsic

The absorption of the light may be intrinsic or extrinsic Attenuation Fiber Attenuation Types 1- Material Absorption losses 2- Intrinsic Absorption 3- Extrinsic Absorption 4- Scattering losses (Linear and nonlinear) 5- Bending Losses (Micro & Macro) Material

More information

Installing the Avaya 10-Gigabit

Installing the Avaya 10-Gigabit Installing the Avaya 10-Gigabit CHAPTER 1 Uplink Module Overview This document describes the installation of the Avaya 10-Gigabit Uplink Module (Figure 1). Figure 1. 10-Gigabit Uplink Module This document

More information

Measuring the Modal Properties of Multimode Fibres. FOToN 6th May 2004

Measuring the Modal Properties of Multimode Fibres. FOToN 6th May 2004 Measuring the Modal Properties of Multimode Fibres Andrew G Hallam David A Robinson FOToN 6th May 24 Structure of Talk Basic mode theory Measuring the mode distribution Measurement results Theory: modes

More information

Optical Communications and Networks - Review and Evolution (OPTI 500) Massoud Karbassian

Optical Communications and Networks - Review and Evolution (OPTI 500) Massoud Karbassian Optical Communications and Networks - Review and Evolution (OPTI 500) Massoud Karbassian m.karbassian@arizona.edu Contents Optical Communications: Review Optical Communications and Photonics Why Photonics?

More information

Optical Systems Contents

Optical Systems Contents Optical Systems Optical Systems Contents Distribution Cables C Type Page 3.7 Breakout Cables T Type Page 3.9 Loose Tube Cables Unitube Page 3.14 Multi Loose Tube Page 3.18 Optical Components Pig / Patch

More information

This special provision is for the installation and testing of the following equipment:

This special provision is for the installation and testing of the following equipment: FIBRE OPTIC MODEMS - Item No. Special Provision No. 683F18 April 2005 1. DESCRIPTION This special provision is for the installation and testing of the following equipment: Low Range Fibre Optic Modems

More information

Comment Supporting materials: The Reuse of 10GbE SRS Test for SR4/10, 40G-LR4. Frank Chang Vitesse

Comment Supporting materials: The Reuse of 10GbE SRS Test for SR4/10, 40G-LR4. Frank Chang Vitesse Comment Supporting materials: The Reuse of 10GbE SRS Test for SR4/10, 40G-LR4 Frank Chang Vitesse Review 10GbE 802.3ae testing standards 10GbE optical tests and specifications divided into Transmitter;

More information

Mixing TrueWave RS Fiber with Other Single-Mode Fiber Designs Within a Network

Mixing TrueWave RS Fiber with Other Single-Mode Fiber Designs Within a Network Mixing TrueWave RS Fiber with Other Single-Mode Fiber Designs Within a Network INTRODUCTION A variety of single-mode fiber types can be found in today s installed networks. Standards bodies, such as the

More information

PROJECT REPORT COUPLING OF LIGHT THROUGH FIBER PHY 564 SUBMITTED BY: GAGANDEEP KAUR ( )

PROJECT REPORT COUPLING OF LIGHT THROUGH FIBER PHY 564 SUBMITTED BY: GAGANDEEP KAUR ( ) PROJECT REPORT COUPLING OF LIGHT THROUGH FIBER PHY 564 SUBMITTED BY: GAGANDEEP KAUR (952549116) 1 INTRODUCTION: An optical fiber (or fiber) is a glass or plastic fiber that carries light along its length.

More information

UNIT Write notes on broadening of pulse in the fiber dispersion?

UNIT Write notes on broadening of pulse in the fiber dispersion? UNIT 3 1. Write notes on broadening of pulse in the fiber dispersion? Ans: The dispersion of the transmitted optical signal causes distortion for both digital and analog transmission along optical fibers.

More information

2062 JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 23, NO. 6, JUNE 2005

2062 JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 23, NO. 6, JUNE 2005 2062 JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 23, NO. 6, JUNE 2005 Analysis of Graded-Index Polymer Optical Fiber Link Performance Under Fiber Bending Kenji Makino, Takuhiro Nakamura, Takaaki Ishigure, Member,

More information

Fiber Optic Outside Plant Cables (4-144 Fibers)

Fiber Optic Outside Plant Cables (4-144 Fibers) Fiber Optic Outside Plant Cables (4-144 ) Central Tube Dielectric Cable 4-12 Fiber Water Blocking Strength Members Multi-Tube Dielectric Cable 24-216 Fiber The number of tubes changes depending on fiber

More information

Physical Layer Cabling: Fiber-Optic

Physical Layer Cabling: Fiber-Optic Physical Layer Cabling: Fiber-Optic Fiber-Optic Basics The EM Spectrum: Physics and Math Attenuation and Dispersion in Fiber Fiber-Optic Hardware Networking over Fiber-Optic Safety with Fiber Fiber-Optic

More information

DISPERSION COMPENSATING FIBER

DISPERSION COMPENSATING FIBER DISPERSION COMPENSATING FIBER Dispersion-Compensating SM Fiber for Telecom Wavelengths (1520-1625 nm) DCF38 is Specifically Designed to Compensate Corning SMF-28e+ Fiber Short Pulse Broad Pulse due to

More information

TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct Application

TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct Application TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct Application (SM 24, 36, 48, 64, 96 Fibers) Product: Single Mode Optical Fiber Cable Producer: XCOM L TD. / Bulgaira Date: August 1, 2012 Write

More information

Dax DX-S10121 (12F Sin ngle Mode Armoured Fiber Cable -Uni-Tube Design) Introduction:

Dax DX-S10121 (12F Sin ngle Mode Armoured Fiber Cable -Uni-Tube Design) Introduction: Dax DX-S10121 (12F Single Mode Armoured Fiber Cable -Uni-Tube Design) Introduction: Dax DX-S1012burial installations, providing outstanding mechanical protection and rodent resistance. is a12 core Single

More information

Optical Fiber Attributes

Optical Fiber Attributes Optical Fiber Attributes What Matters As Capacity Demands Increase And Networks Evolve Ian Davis Regional Marketing Manager, EMEA and Strategic Alliances Manager Agenda What attributes matter in long-haul,

More information

ITU-T G.654. Characteristics of a cut-off shifted single-mode optical fibre and cable

ITU-T G.654. Characteristics of a cut-off shifted single-mode optical fibre and cable I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.654 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (11/2016) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND

More information

Dispersion in Optical Fibers

Dispersion in Optical Fibers Dispersion in Optical Fibers By Gildas Chauvel Anritsu Corporation TABLE OF CONTENTS Introduction Chromatic Dispersion (CD): Definition and Origin; Limit and Compensation; and Measurement Methods Polarization

More information