Low Power FM Antenna Systems

Size: px

Start display at page:

Download "Low Power FM Antenna Systems"

Douglas Mosley
6 years ago
Views:

1 Low Power FM Antenna Systems

J3YF J3YF 3 ELEMENT FM YAGI ANTENNA JAMPRO Yagi 3 Element Antenna Hot Dip Galvanized Steel Directional Radiation Pattern Suitable for Medium and

3:1 Polarization: Vertical (Horizontal upon Request) Max Power: 5000 W (Single Carrier) Connector: 7/8 EIA Dimensions: Net weight: 54 x68 x3

5 lbs/12 kg MECHANICAL FEATURES Materials: Body and Bracket hot dip galvanized steel, Stainless steel hardware, Teflon isolators, silicone O Rings

5 / 90 to 114mm Also available on request option for pole Ø 2.36 to 2.99 / 60 to 76mm Mounting Brackets: Included Distance Between Antennas: 2.

2 J3YF J3YF 3 ELEMENT FM YAGI ANTENNA JAMPRO Yagi 3 Element Antenna Hot Dip Galvanized Steel Directional Radiation Pattern Suitable for Medium and High Power FM Stacked Array ELECTRICAL FEATURES Band: MHz Bandwidth: FM Band Average Gain: 4.5 dbd (6.65 dbi) VSWR: < 1.3:1 Polarization: Vertical (Horizontal upon Request) Max Power: 5000 W (Single Carrier) Connector: 7/8 EIA Dimensions: Net weight: 54 x68 x3 /133x173x8 cm 26.5 lbs/12 kg MECHANICAL FEATURES Materials: Body and Bracket hot dip galvanized steel, Stainless steel hardware, Teflon isolators, silicone O Rings Mounting: The antenna is supplied with pipe mounting for both horizontal and vertical polarization. Standard option for pole Ø 3.5 to 4.5 / 90 to 114mm Also available on request option for pole Ø 2.36 to 2.99 / 60 to 76mm Mounting Brackets: Included Distance Between Antennas: 2.5m 3m / 8.25 ft 9.84 ft These directional antennas can be used in vertical or horizontal polarization to set up systems having directional, semi directional and Omni directional diagrams. All specifications subject to change without notice 6340 Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

3 ANTENNA SPECIFICATIONS J3YF-2 ANTENNA TYPE: J3YF-2 JAMPRO 3 FM Yagi antenna system Includes: J3YF FM Yagi antenna, 2 each Power splitter, 2-way Feed cables, 2 each Standard mounting brackets Est. power gain: 6.98 dbd 2 Levels Electrical beam tilt: -0 Antenna VSWR: 1.3:1 Max. Input Power Rating: 5 kw Antenna input connector size: 7/8 EIA ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JBVP VERTICAL DIPOLE FM BROADCAST ANTENNA The JAMPRO JBVP is a vertically polarized broad band side mount FM antenna consisting of a Balun fed vertical dipole, power divider and heliax coaxial feed

4 JBVP VERTICAL DIPOLE FM BROADCAST ANTENNA The JAMPRO JBVP is a vertically polarized broad band side mount FM antenna consisting of a Balun fed vertical dipole, power divider and heliax coaxial feed lines. The JBVP vertical dipole antenna is constructed of stainless steel and brass inner conductor. All associated brackets and hardware are made of hot dipped, galvanized steel for many years of dependable service. Vertical or elliptical polarization VSWR: 1.25:1 over 6 MHz Excellent diplexing capabilities Medium power handling Beam tilt and null fill available Custom directional patterns available The JAMPRO vertically polarized FM array is completely assembled full size and factory tuned on an electrically similar tower structure to insure proper impedance match and low VSWR. The antenna features symmetrical band bass and is ideal for HD Radio and analog broadcasting. Reduced element spacing for minimizing RF levels 6340 Sky Creek Dr, Sacramento, CA T: F:

5 JBVP # Bays Power Gain Gain (db) Power kw NOTES: 1. All inputs EIA flange, female. 2. Feed points: ~5 ft. below center (mid-aperture). 3. Power derating occurs above 2,000 ft. elevation. 4. Power and db gains are typical for horizontal and vertical components. 5. Custom mounting brackets available. 6. Free space azimuth circularity is +/- 2dB. 7. Polarization is vertical. 8. Power gain is based on half wave dipole in free space. 9. Optional fine matcher available. Contact factory for details. OPTIONS: Options available include FCC Directionalization, Pattern Measurement Service, beam tilt, null fill, and special mounting brackets. Since many factors contribute to a station's compliance with the FCC exposure guidelines for radio frequency radiation, JAMPRO ANTENNAS, INC. cannot accept any responsibility in this matter. The station must examine and determine its status based on each individual situation. For reduced low angle radiation near the tower, a low RFR model of this antenna is available. Contact the factory for pricing data and further details. *All specifications subject to change without notice Sky Creek Dr, Sacramento, CA T: F:

6 FM ANTENNA SPECIFICATIONS JBVP-1 Vertically Polarized Broadband FM Sidemount Antenna MODEL: JBVP-1 Power gain:.9x / -4.5 dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: Power Rating: Antenna input connector size, EIA: 1.25:1 over 6 MHz 2.5 kw 1-5/8 EIA ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

7 FM ANTENNA SPECIFICATIONS JBVP-2 Vertically Polarized Broadband FM Sidemount Antenna MODEL: JBVP-2 Power gain: 1.9x / 2.8 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: Power Rating: Antenna input connector size, EIA: 1.25:1 over 6 MHz 5.0 kw 1-5/8 EIA ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JLPC THE JAMPRO LOW POWER FM BROADCAST ANTENNA The JAMPRO JLPC antenna is the low power version of the popular PENETRATOR antenna, which has become an industry standard for quality and performance.

8 JLPC THE JAMPRO LOW POWER FM BROADCAST ANTENNA The JAMPRO JLPC antenna is the low power version of the popular PENETRATOR antenna, which has become an industry standard for quality and performance. Each bay consists of a PENETRATOR style radiating element with a rigid shunt feed line supported by a galvanized steel mounting bracket; standard round leg mounting brackets for a uniform face tower are included with each antenna. Silver plated inner conductor connectors are used throughout for maximum contact life and minimum power loss. Outstanding Performance for HD Radio, Stereo and SCA Operation. Excellent VSWR and Bandwidth 1.10:1 +/- 150 KHz typical Reduced RF Arrays Pattern Measurement Study Custom Mounting Brackets Available Electrical Beam Tilt Null Fill Rugged Mechanical Construction Mounting True Circular Polarization Range MHz DC Grounded at Each Bay for Lighting Protection Marine Brass & Copper for Longevity 6340 Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

9 JLPC # Bays Power Gain db Gain 1 Mi. Safe Input Power kw Weight (lbs) Wind load (lbs) Contact Factory Notes: 1. Weights and wind loads contact factory. 2. Wind loads based on 50/33 PSF (98 MHz, midband) 3. Feed points, when end fed is 3 ft below bottom bay; when center fed is 9. 6 below center 4. All inputs are EIA flange, female 5. Power derating occurs above 2,000 feet elevation. Contact factory for details 6. Power and Db gains are typical for horizontal and vertical components 7. Special mounting brackets are available 8. Other combinations of EIA inputs and power ratings available 9. Free space azimuth circularity is ± 2.0 db 10. Polarization is right hand, clockwise circular 11. Power gain is based on half wave dipole in free space Since many factors contribute to a station's compliance with the FCC exposure guidelines for radio frequency radiation, JAMPRO ANTENNAS, INC. cannot accept any responsibility in this matter. The station must examine and determine its status based on each individual situation. For reduced low angle radiation near the tower, a low RFR model of this antenna is available. Contact the factory for pricing data and further details. *All specifications are subject to change without notice Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

10 FM ANTENNA SPECIFICATIONS JLPC-1 Circularly Polarized Low Power FM Sidemount Antenna *Factory Tuned MODEL NUMBER: JLPC-1 Est. power gain:.46x / dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: Max Input power: Antenna input connector size, EIA: 1.1:1 +/- 150 khz. 1 kw 7/8 female ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

11 FM ANTENNA SPECIFICATIONS JLPC-2 Circularly Polarized Low Power FM Sidemount Antenna *Factory Tuned MODEL NUMBER: JLPC-2 Est. power gain: 1.0x / 0.0 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: Max Input power: Antenna input connector size, EIA: 1.1:1 +/- 150 khz. 2 kw 7/8 female ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JLLP LOW POWER PENETRATOR The JAMPRO JLLP antenna has been designed to meet the needs of low power and educational stations that require excellent performance on a low budget.

12 JLLP LOW POWER PENETRATOR The JAMPRO JLLP antenna has been designed to meet the needs of low power and educational stations that require excellent performance on a low budget. This antenna uses the same basic design as the JAMPRO PENETRATOR series of side-mount antennas, which set the industry standard for FM antennas. By using an external and non-pressurized feed system, manufacturing costs are kept to a minimum. Each bay is fed with flexible cable. Configurations with two or more bays are fed through a power divider and cable system that has a 7/8" EIA flange input (female). The antenna elements are constructed of high strength marine brass. Power rating 4kW maximum Outstanding VSWR without field tuning Available for MHz Electrical deicers available VSWR 1.1:1 +/- 150 khz TYPICAL SPECIFICATIONS # of Bays Power Gain Gain (db) Input Power Net Weight (lbs.) Windload (lbs) kw kw kw kw *Values provided average/rms gains; All other stated gains are Peak gains. Gains do not include losses for feed system beam tit or null fill. Non-ionizing Radiation Since many factors contribute to a station s compliance with the FCC exposure guidelines for radio frequency radiation, JAMPRO ANTENNAS, INC. cannot accept any responsibility in this matter. The station must examine and determine its status based on each individual situation. *All specifications are subject to change without notice Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

13 FM ANTENNA SPECIFICATIONS JLLP-1 Circularly Polarized Low Power FM Sidemount Antenna *Factory Tuned MODEL NUMBER: JLLP-1 Est. power gain: 0.475x / dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: Max Input power: DC Ground Antenna input connector size, EIA: 1.1:1 ± 150 khz 1 kw Standard Type "N" Connector ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

14 FM ANTENNA SPECIFICATIONS JLLP-2 Circularly Polarized Low Power FM Sidemount Antenna *Factory Tuned MODEL NUMBER: JLLP-2 Est. power gain: 0.955x / dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: Max Input power: DC Ground Antenna input connector size, EIA: 1.1:1 ± 150 khz 2 kw Standard 7/8 EIA Female ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JLCP JLCP LOW POWER ANTENNA The JAMPRO JLCP is a low power antenna designed specifically for Omni-Directional low power applications such as LPFM, Translator and Booster stations.

15 JLCP JLCP LOW POWER ANTENNA The JAMPRO JLCP is a low power antenna designed specifically for Omni-Directional low power applications such as LPFM, Translator and Booster stations. The simplicity of the JLCP helix design gives low power stations the flexibility needed to meet their individual requirements. It offers Stainless Steel Construction. A stacking harness is included when multiple bay arrays are ordered. The JLCP is field tunable from 88 to 108 MHz. The antenna features: VSWR 1.5:1 or better. Standard 500 watt input rating with 1kW & 2 kw available. Provided for 2 OD pole mount. Optional special brackets available, contact factory. Stainless steel construction 500 Watts input power option 1 & 2 kw Circularly polarized Low maintenance *All specifications are subject to change without notice. Easy to install Field tunable VSWR: 1.5:1 or better # of Bays Gain (Times) Gain (db) Input Size 500 Watts Input Size 1000 Watts Type "N" 7-16 DIN Input Size 2000 Watts Not Available Type "N" 7/8" EIA 7/8" EIA Not Available 7/8" EIA 7/8" EIA Net Weight (lbs.) Wind load (lbs) Type "N" 7/8" EIA 7/8" EIA Contact Factory Not Available 7/8" EIA 7/8" EIA Not Available 7/8" EIA 7/8" EIA Not Available 7/8" EIA 7/8" EIA 6340 Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

16 FM ANTENNA SPECIFICATIONS JLCP-1 Circularly Polarized Low Power FM Sidemount Antenna *Field Tunable MODEL NUMBER: JLCP-1 Est. power gain:.46x / dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: Max Input power: Antenna input connector size, EIA: 1.5:1 ± 150 khz. 500 Watts Type "N" Connector ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

FM ANTENNA SPECIFICATIONS JLCP-2 Circularly Polarized Low Power FM Sidemount Antenna *Field Tunable MODEL NUMBER: JLCP-2 Est. power gain:.955x / -0.

17 FM ANTENNA SPECIFICATIONS JLCP-2 Circularly Polarized Low Power FM Sidemount Antenna *Field Tunable MODEL NUMBER: JLCP-2 Est. power gain:.955x / dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: Max Input power: Antenna input connector size, EIA: 1.5:1 +/- 150 khz. 500 Watts Type "N" Connector ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JLVP Vertically Polarized Booster Translator or LPFM Antenna The JAMPRO JLVP is a low power antenna designed specifically for Omni-Directional translator/booster applications.

18 JLVP Vertically Polarized Booster Translator or LPFM Antenna The JAMPRO JLVP is a low power antenna designed specifically for Omni-Directional translator/booster applications. The simplicity of the JLVP design gives low power stations the flexibility needed to meet their individual requirements. A stacking harness may be used to add multiple bays to achieve the required gain. The JLVP is field tunable from 88 to 108 MHz. Higher power ratings are available upon request. The antenna features: VSWR 1.5:1 or better. Stainless Steel Construction 500 Watts Input Power Option 1 kw Vertically Polarized Low Maintenance # of Bays Gain (Power) Gain (db) Input Power* Net Weight Wind Load CaAa Sq Watts Watts Watts Easy to Install Field Tunable VSWR <1.5:1 DC Ground at each bay for lightning protection Watts Contact Factory All specifications subject to change without notice. *1kW input with 7/8 Input size available-contact factory for pricing Contact Factory 6340 Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

19 FM ANTENNA SPECIFICATIONS JLVP-1 Vertically Polarized Translator/Booster Antenna ANTENNA MODEL: JLVP-1 Power gain:.955x / -0.2 dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: 1.5:1 Power Rating: Antenna input connector size: 500 Watts N-type Connector ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

20 FM ANTENNA SPECIFICATIONS JLVP-2 Vertically Polarized Translator/Booster Antenna ANTENNA MODEL: JLVP-2 Power gain: 1.91x / 2.8 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: 1.5:1 Power Rating: Antenna input connector size, EIA: 500 Watts N-type Connector ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

JCPB-L JCPB FM BROADBAND BROADCAST ANTENNA The JAMPRO JCPB side mount antenna is a broadband version of the PENETRATOR antenna, which has become an industry standard for quality and performance.

21 JCPB-L JCPB FM BROADBAND BROADCAST ANTENNA The JAMPRO JCPB side mount antenna is a broadband version of the PENETRATOR antenna, which has become an industry standard for quality and performance. Each bay consists of a PENETRATOR style radiating element supported by a galvanized steel mounting bracket; standard round leg mounting brackets for a uniform face tower are included with each antenna. Silver plated inner conductor connectors are used throughout for maximum contact life and minimum power loss. Power rating 500 W Ideal for broadband & multi frequency applications Electrical Specifications Excellent VSWR & bandwidth Circular polarization Frequency Circularity Polarization Impedance Band II MHz 2.0 db (Free Space) Circular DC ground at each bay & feedpoint radomes available VSWR 1.25:1 *Field Tunable 6340 Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

22 JCPB-L # of Bays Power Gain (HPOL) (times) Gain (HPOL) (db) Power Rating JCPB-L W W W W W W NOTES: 1. All inputs EIA flange, female. 2. Power derating occurs above 2,000 ft. elevation. 3. Power and db gains are typical RMS gains for horizontal and vertical components. 5. Other combinations of EIA inputs and power rating available. 6. Free space azimuth circularity is 2.0 db. 7. Polarization is right hand, clockwise, circular. 8. Power gain is based on half wave dipole in free space. 4. Special mounting brackets available. Since many factors contribute to a station's compliance with the FCC exposure guidelines for radio frequency radiation (RFR), JAMPRO ANTENNAS, INC. cannot accept any responsibility in this matter. The station must examine and determine its status based on each individual situation. For reduced low angle radiation near the tower, a low RFR model of this antenna is available. Contact the factory for pricing data and further details. *All specifications subject to change without notice Sky Creek Dr, Sacramento, CA T: F: JAMPRO.com

23 FM ANTENNA SPECIFICATIONS JCPB-1L Circular Polarized Low Power FM Broadband Sidemount Antenna *Field Tunable (factory tuned at an additional cost) MODEL NUMBER: JCPB-1L Est. power gain: 0.45x / -3.4 dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: 1.25:1 Max input power: Antenna input connector size: 500 W Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES. JAMPRO.com

24 FM ANTENNA SPECIFICATIONS JCPB-1LR Circular Polarized Low Power FM Broadband Sidemount Antenna with Feedpoint Radomes *Field Tunable (factory tuned at an additional cost) MODEL NUMBER: JCPB-1LR Est. power gain: 0.45x / -3.4 dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: 1.25:1 Max input power: Antenna input connector size: 500 W Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES. JAMPRO.com

25 FM ANTENNA SPECIFICATIONS JCPB-2L Circular Polarized Low Power FM Broadband Sidemount Antenna *Field Tunable (factory tuned at an additional cost) MODEL NUMBER: JCPB-2L Est. power gain: 0.90x / -0.4 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: 1.25:1 Max input power: Antenna input connector size: 500 W Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES. JAMPRO.com

26 FM ANTENNA SPECIFICATIONS JCPB-2LR Circular Polarized Low Power FM Broadband Sidemount Antenna with Feedpoint Radomes *Field Tunable (factory tuned at an additional cost) MODEL NUMBER: JCPB-2LR Est. power gain: 0.90x / -0.4 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: 1.25:1 Max input power: Antenna input connector size: 500 W Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES. JAMPRO.com

27 JFWD Band II Folded Dipole Antenna Typical Electrical Specifications Frequency Range 88MHz to 108MHz Return Loss db <-14dB VSWR <1.5:1 HRP Beamwidth 203 Front to back ration Polarization Connector 6dB Vertical Type N Dipole Support boom Weight Mechanical Data Ø 15.8mm (5/8 ) aluminum with 1.6mm (16swg) wall 31.75mm (1 1/4 ) square aluminum with 1.6mm (16swg) wall 6kg / 14lbs Weather protection Feed point potted in polyurethane resin No of Bays 3dB Beamwidth and Gain Table Gain dbd Beamwidth VRP Max Power Kg/lbs W 6/ W (limited by input power divider) W (limited by input power divider) W (limited by input power divider) W (limited by input power divider) 25/55 35/77 40/89 55/122 N.B. If higher power ratings are required please contact the factory 6340 Sky Creek Dr, Sacramento, CA T: F:

28 FM ANTENNA SPECIFICATIONS JFWD -1 ANTENNA TYPE: JFWD-1 Band II Folded Dipole Antenna Power gain: 2.8 dbd 1 Bay Electrical beam tilt: 0 Antenna VSWR: <1.5:1 Max Power Rating: Antenna input connector size, EIA: 300 watts Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

29 FM ANTENNA SPECIFICATIONS JFWD-2 ANTENNA TYPE: JFWD-2 Band II Folded Dipole Antenna Power gain: 5.1 dbd 2 Bays Electrical beam tilt: 0 Antenna VSWR: <1.5:1 Max Power Rating: Antenna input connector size, EIA: 300 watts Type N ACTUAL PERFORMANCE MAY DIFFER FROM THESE DUE TO THE ELECTRICAL, MECHANICAL AND MEASURED LIMITATIONS AT YOUR FREQUENCIES.

Coaxial Cable 7/8" Foam-Dielectric Coaxial Cable Corrugated Copper 50 Ohm DESCRIPTION Low Loss Cable, standard jacket Low Loss Cable, fire retardant, halogen free jacket CONSTRUCTION Inner conductor

30 Coaxial Cable 7/8" Foam-Dielectric Coaxial Cable Corrugated Copper 50 Ohm DESCRIPTION Low Loss Cable, standard jacket Low Loss Cable, fire retardant, halogen free jacket CONSTRUCTION Inner conductor Material smooth copper tube Diameter, in (mm) 0.37 (9.3) Dielectric Material microcell gas-injected PE Diameter, in (mm) 0.93 (23.5) Outer conductor Material corrugated copper Diameter, in (mm) 0.98 (25.0) Outer sheath Material Durathene Thickness, in (mm) 0.06 (1.4) Diameter, in (mm) 1.10 (28.0) MECHANICAL CHARACTERISTICS Minimum bending radius a) Single bending, in (cm) 4 (10) b) 15 repeated bends, in (cm) 10 (25) Maximum pulling strength, lb (kg) 330 (150) Recommended temperature range - Storage -94 to +185 F (-70 to +85 C) - Installation -40 to +140 F (-40 to +60 C) - Operation -67 to +185 F (-55 to +85 C) Maximum length per hoisting grip, ft (m) 230 (70) Maximum hanger spacing, ft (m) 4 (1.2) Flat plate crush resistance, lb/in (kg/mm) 79 (1.4) Bending moment, lb-ft (N m) 8.6 (11.6) Weight, lb/ft (kg/m) 0.33 (0.50) ELECTRICAL CHARACTERISTICS Characteristic impedance, Ω 50 ± 1 Nominal capacitance, pf/ft (pf/m) 23 (75) Relative propagation velocity, % 89 Inductance, μh/ft (μh/m) (0.187) DC-resistance at 68 F (20 C) - Inner conductor, Ω/1000 ft (Ω/1000 m) 0.41 (1.34) - Outer conductor, Ω/1000 ft (Ω/1000 m) 0.30 (1.0) RF peak voltage, kv 2.9 RF peak power, kw 86 Cut-off frequency, GHz 5.1 Insulation resistance, MΩ/km 5000 ELECTRICAL CHARACTERISTICS Attenuation and power rating Frequency Attenuation at 68 F (20 C)* Mean power rating** (MHz) (db/100 ft) (db/100m) (kw) * Nominal values ** Ambient temperature = 104 F (40 C); temperature of inner conductor = 212 F (100 C); VSWR = 1.0; no solar loading

Coaxial Cable 7/8" Coaxial Connectors A-Series DESCRIPTION N-male, MonoBlock, O-ring N-female, MonoBlock, O-ring 7/16 DIN male, MonoBlock, O-ring 7/16 DIN female, MonoBlock, O-ring Standard Series

31 Coaxial Cable 7/8" Coaxial Connectors A-Series DESCRIPTION N-male, MonoBlock, O-ring N-female, MonoBlock, O-ring 7/16 DIN male, MonoBlock, O-ring 7/16 DIN female, MonoBlock, O-ring Standard Series DESCRIPTION N-male, MonoBlock, O-ring N-female, MonoBlock, O-ring 7/16 DIN male, MonoBlock, O-ring 7/16 DIN female, MonoBlock, O-ring ELECTRICAL Nominal impedance, Ω 50 Return 2.5 GHz, db -35 3rd order intermodulation product, dbc -163 Temperature range -40 F to +140 F (-40 C to +60 C) Water immersion testing IP67 & IP68 Materials External parts Passivated silver plated or electroless nickel plated brass Outer contact Passivated silver plated brass Inner contact Passivated silver plated Cu-Be Dielectric TXP / PTFE O-rings Silicone rubber ACCESSORIES DESCRIPTION Tools Cable Prep Tool, MonoBlock Connectors Ground Kit Tool Torque Wrench, Back Nut Torque Wrench, 7/16 DIN Coupler Hoisting Grip Lace-Up Hoisting Grip Pre-Laced Hoisting Grip Hangers Butterfly Hangers, Kit of 10 Snap-In Hangers, Kit of 10 Snap-Stack Hangers, Kit of 10 Coax Support Blocks Mini Coax Support Blks, Kit of 10 DESCRIPTION Angle Adapters, Stainless Steel Universal SST Angle Adaptor, Kit of 10 SST Angle Adaptor, Kit of 10 Grounding Kits Standard Grounding Kit Clip-On Grounding Kit Weatherproofing Standard Weatherproofing Kit Boots and Cushions 4" Boot Assembly, 1 hole 4" Boot Assembly, 3 hole Standard Port Cushion, 1 hole 4" Boot Assembly, Cushion not included 5" Boot Assembly, Cushion not included

Coaxial Cable 1/2" Foam-Dielectric Coaxial Cable Corrugated Copper 50 Ohm DESCRIPTION Low Loss Cable, standard jacket Low Loss Cable, fire retardant, halogen free jacket CONSTRUCTION Inner conductor

32 Coaxial Cable 1/2" Foam-Dielectric Coaxial Cable Corrugated Copper 50 Ohm DESCRIPTION Low Loss Cable, standard jacket Low Loss Cable, fire retardant, halogen free jacket CONSTRUCTION Inner conductor Material copper clad aluminum Diameter, in (mm) (4.8) Dielectric Material microcell gas-injected PE Diameter, in (mm) (12.4) Outer conductor Material corrugated copper Diameter, in (mm) (13.7) Outer sheath Material Durathene Thickness, in (mm) (1.1) Diameter, in (mm) (16.0) MECHANICAL CHARACTERISTICS Minimum bending radius a) Single bending, in (cm) 2.8 (7) b) 15 repeated bends, in (cm) 5 (12.5) Maximum pulling strength, lb (kg) 220 (100) Recommended temperature range - Storage -94 to +185 F (-70 to +85 C) - Installation -40 to +140 F (-40 to +60 C) - Operation -67 to +185 F (-55 to +85 C) Maximum length per hoisting grip, ft (m) 230 (70) Maximum hanger spacing, ft (m) 3 (0.9) Flat plate crush resistance, lb/in (kg/mm) 106 (1.9) Bending moment, lb-ft (N m) 2.6 (3.5) Weight, lb/ft (kg/m) 0.16 (0.24) ELECTRICAL CHARACTERISTICS Characteristic impedance, Ω 50 ± 1 Nominal capacitance, pf/ft (pf/m) 23 (76) Relative propagation velocity, % 88 Inductance, μh/ft (μh/m) (0.19) DC-resistance at 68 F (20 C) - Inner conductor, Ω/1000 ft (Ω/1000 m) 0.45 (1.48) - Outer conductor, Ω/1000 ft (Ω/1000 m) 0.62 (2.04) RF peak voltage, kv 1.6 RF peak power, kw 25.6 Cut-off frequency, GHz 9.8 Insulation resistance, MΩ/km 5000 ELECTRICAL CHARACTERISTICS Attenuation and power rating Frequency Attenuation at 68 F (20 C)* Mean power rating** (MHz) (db/100 ft) (db/100m) (kw) * Nominal values ** Ambient temperature = 104 F (40 C); temperature of inner conductor = 212 F (100 C); VSWR = 1.0; no solar loading

Coaxial Cable 1/2" Coaxial Connectors DESCRIPTION N-male, O-ring N-female, O-ring N-male, right angle, O-ring 7/16 DIN male, O-ring 7/16 DIN female, O-ring 7/16 DIN male, right angle, O-ring 7/8 EIA

33 Coaxial Cable 1/2" Coaxial Connectors DESCRIPTION N-male, O-ring N-female, O-ring N-male, right angle, O-ring 7/16 DIN male, O-ring 7/16 DIN female, O-ring 7/16 DIN male, right angle, O-ring 7/8 EIA flange, O-ring ELECTRICAL Nominal impedance (Ω) 50 Return 2.5 GHz (db) -35 3rd order intermodulation product (dbc) -163 Temperature range -40 F to +140 F (-40 C to +60 C) Water immersion testing IP67 & IP68 Materials External parts Passivated silver plated or electroless nickel plated brass Outer contact Passivated silver plated brass Inner contact Passivated silver plated Cu-Be Dielectric TXP / PTFE O-rings Silicone rubber ACCESSORIES DESCRIPTION Tools Cable Prep Tool Torque Wrench, Back Nut Torque Wrench, 7/16 DIN Coupler Hoisting Grips Lace-Up Hoisting Grip Pre-Laced Hoisting Grip Hangers Butterfly Hangers, Kit of 10 Snap-In Hangers, Kit of 10 Snap-Stack Hangers, Kit of 10 Coax Support Blocks Mini Coax Support Blks, Kit of 10 Large Coax Support Blks, Kit of 10 DESCRIPTION Angle Adapters, Stainless Steel Universal SST Angle Adaptor, Kit of 10 SST Angle Adaptor, Kit of 10 Weatherproofing Standard Weatherproofing Kit Boots and Cushions 4" Boot Assembly, 1 hole 4" Boot Assembly, 3 hole Standard Port Cushion, 1 hole Standard Port Cushion, 2 hole Standard Port Cushion, 3 hole 4" Boot Assembly, Cushion not included 5" Boot Assembly, Cushion not included

ABOUT JAMPRO CONTINUING THE TRADITION

ABOUT JAMPRO CONTINUING THE TRADITION JAMPRO ANTENNAS, INC. Your Partner for DTV-DVB-T & HD Radio Solutions- the oldest, most experienced broadcast antenna company in North America with over 50 years of experience providing Complete Turnkey