ENDLESS INNOVATION OPTICAL FIBER. Bendfree Bendfree+ UltraPass. WidePass. Ultra Bendfree

Size: px

Start display at page:

Download "ENDLESS INNOVATION OPTICAL FIBER. Bendfree Bendfree+ UltraPass. WidePass. Ultra Bendfree"

Britney Craig
6 years ago
Views:

ENDLESS INNOVATION Today, vast amounts of information are running across the transmission at extremely high speeds.

Our optical fibers have also been recognized by Tecordia GR20 Issue 3 for its proven quality. WidePass (ITU-T G.652.D) Bendfree (ITU-T G.657.A) Bendfree+ (ITU-T G.657.A2) Ultra Bendfree (ITU-T G.657.B3) UltraPass (ITU-T G.

1 ENDLESS INNOVATION Today, vast amounts of information are running across the transmission at extremely high speeds. OPTICAL FIBER Samsung offers a full line of optical fibers for all network applications, and we work to ensure our products are of superior quality and performance that will provide continuous and reliable operation for our customers. Our numerous customers around the world and our ever-growing market presence continue to confirm our excellent reputation, top-notch quality, and first-rate performance of our optical fibers. Our optical fibers have also been recognized by Tecordia GR20 Issue 3 for its proven quality. WidePass (ITU-T G.652.D) Bendfree (ITU-T G.657.A) Bendfree+ (ITU-T G.657.A2) Ultra Bendfree (ITU-T G.657.B3) UltraPass (ITU-T G.656) WidePass Bendfree Bendfree+ Ultra Bendfree UltraPass Low Water Fiber Bend Insensitive Fiber Ultra Bend Insensitive Fiber Non-zero Dispersion-shifted Fiber For several years, the optical fiber manufacturers have worked to minimize the water peak attenuation loss, allowing for proper transmission, even at wavelengths within the 383 nm range. These reduced water peak fibers are considered full spectrum because the reduction of loss in the water absorption spectral region (the E band) allows transmission in this previously unusable portion of the spectrum. When standard fiber is used, the fiber must be installed very carefully to ensure that no small bends along the fiber path to avoid loss. The bending requirement for deployment limits dimensions of hardware and imposes significant costs for FTTH installations. The strong needs for FTTH solutions are optimized for installation in-home. However, there are many challenges associated with the deployment indoor environment. For in-home wiring applications, bend radii in the range of 5 mm are very common due to restricted spaces, sharp corners, and the use of staplers to secure cables. Samsung's UltraPass fiber is suitable for the next generation networks such as high speed wide band, long haul system, etc. due to the large effective area compared with conventional NZ-DSF, it minimize the non-linear effects for high capacity system. 4 5

It has a low attenuation in E-band (360 nm to 460 nm) by eliminating the water peak permanently, which opens up the unusable band for additional bandwidth expansion.

2 WidePass Provides steady performance across the full spectrum of transmission wavelengths Low Water Fiber (ITU-T G.652.D) W idepass single-mode optical fiber (ITU-T G.652.D) is designed to provide full optical transmission over the entire operating wavelength range from 260 nm to nm (O, E, S, C, L-band). It has a low attenuation in E-band (360 nm to 460 nm) by eliminating the water peak permanently, which opens up the unusable band for additional bandwidth expansion. WidePass fiber complies with ITU-T G.652.D requirements and not only meets or exceeds the current industry standards, but also customers expectations. WidePass fiber are optimized for metropolitan and access area network applications and its longterm reliability is guaranteed over the entire life time of the cabled fiber. With even more improved and reinforced specifications in major optical and geometrical parameters, Samsung's WidePass single-mode optical fiber is the product of choice for current and future optical networks ± ± 0.5 Low optical loss across the entire spectrum from 260 nm to nm Tested and passed all the applicable requirements of Telcordia GR-20, Issue 3 The advantage of Raman system due to the high amplification efficiency Long term reliability due to the optimized dual-layer coating structure Low PMD for higher data rate and longer distance Excellent compatibility with any commercial single mode fibers 8.0 Zero Dispersion Wavelength (λ0): 300 nm λ0 324 nm Zero Dispersion Slope (S0) ps / (nm² km) - Maximum Individual Fiber PMD: 0. ps/ km * PMDQ: PMD (Polarization mode dispersion) Link Design Value calculated in accordance with IEC :200, section 5.5, Method, September 200 Long haul telecommunication cables High data-rate voice, video and data communication cables CATV cables Local access, Metro loop transmission cables Cladding Diameter: 25.0 ±.0 μm Core-cladding Concentricity: 0.6 μm Cladding Non-circularity:.0 % Coating-cladding Concentricity: 0 μm Environmental Test Test Condition Induced Attenuation (db / km) Temperature Dependence Temperature Humidity Cycling -0 ~ 85 C up to 98% RH Water Immersion Heat Aging Damp Heat Point Discontinuity (@30 nm & nm) db Cable Cutoff Wavelength (λcc ) 260 nm Attenuation vs. Wavelength 285 nm ~ 330 nm wavelength range The attenuation in the above wavelength range does not exceed the attenuation at 30 nm by more than 0.05 db/km 525 nm ~ 565 nm wavelength range The attenuation in the above wavelength range does not exceed the attenuation at nm by more than 0.03 db/km 0.69 GPa (00 Kpsi).0 ~ 8.9 N.0 ~ 5.0 N 8 6 7

3 Bendfree Truly bend-insensitive fiber, fully optimized for FTTH Low Macro-bending Sensitive Fiber (ITU-T G.657.A) B endfree provides low macro bend and micro bend loss and seamless splicing through its superior PMD and Low Water performance. Samsung Bendfree can be used in all cable constructions, including loose tube, tight buffered, ribbon, and central tube designs. It supports long-haul, metropolitan and premises applications in telecommunications, CATV, utility and intelligent traffic networks ± ± 0.5 Bend Insensitive Fiber Tested and passed all the applicable requirements of Telcordia GR-20, Issue 3 Low macro-bend loss across the full spectrum of wavelengths from 260 nm to nm Easier to install, handle, and store in space-limitations applications Optimized properties for long-haul, metropolitan, and FTTx applications Zero Dispersion Wavelength (λ0): 300 nm λ0 324 nm Zero Dispersion Slope (S0) ps/(nm2 km) - Maximum Individual Fiber PMD: 0. ps/ km * PMDQ: PMD (Polarization mode dispersion) Link Design Value calculated in accordance with IEC :200, section 5.5, Method, September 200 FTTx Central office High power applications Micro cables Drop cables Customer premise Cladding Diameter: 25.0 ± 0.7 μm Coating-cladding Concentricity: 0 μm Induced attenuation (db / km) -0 ~ 85 C up to 98% RH Point Discontinuity (@30 nm & nm) db Cable Cutoff Wavelength (λcc ) 260 nm GPa (00 Kpsi).0 ~ 8.9 N.0 ~ 5.0 N 8 8 9

4 Bendfree+ Truly bend-insensitive fiber, fully optimized for FTTH Bend Insensitive Fiber (ITU-T G.657.A2) B endfree+ is a full spectrum fiber with enhanced macro bend performance compared to traditional bend insensitive fiber. This fiber offers enhanced bend performance down to mm bend radius, is ideally suited for in-building and connectivity applications, and provides full compatibility and seamless splicing with the installed base of conventional G.652.D single-mode fibers. It is an excellent choice for central offices, multiple dwelling unit (MDU) backbone cabling, FTTx, OSP cabinets, fiber to the cell site, enterprise networks, or any application where very small bend diameters may be encountered ± 0.4 Dispersion Value (ps/(nm km)) Zero Dispersion Wavelength (λ0): 300 nm λ0 324 nm Zero Dispersion Slope (S0) ps/(nm2 km) Enhanced bend performance compared to traditional bend insensitive fiber Optimized design for in-building, cabinet, cell site, and central office applications where small bend diameters are encountered Improved cable performance under the high-stress and low-temperature environments - Maximum Individual Fiber PMD: 0.2 ps/ km * PMDQ : PMD (Polarization mode dispersion) Link Design Value calculated in accordance with IEC :200, section 5.5, Method, September 200 FTTx multi-dwelling units (MDUs) FTTx In-building applications FTTx drop cables Central office Customer premise Fiber to the cell sites Cladding Diameter: 25.0 ± 0.7 μm Coating-cladding Concentricity: 0 μm Induced attenuation (db / km) -0 ~ 85 C up to 98% RH Maximum Value (db / km) Point Discontinuity (@30 nm & nm) db Cable Cutoff Wavelength (λcc ) 260 nm 0.69 GPa (00 Kpsi) 0.0 ~ 8.9 N.0 ~ 5.0 N

5 Ultra Bendfree Superior bend performance for multi dwelling unit and in-home wiring application Ultra Bend Insensitive Fiber (ITU-T G.657.B3) U ltra Bendfre offers outstanding bend performance (beyond G.657.B3) to meet the network requirements for faster, easy, low skill, plug and play installation for applying tensioning, stapling, and 90-degree corner bend at the same time. It is compatible with large scale manufacturing. In the indoor applications, the optical fiber cables must have performance comparable to that of copper cables. Supporting in-home wiring applications, the Ultra Bendfree, Enhanced Bend Insensitive Fiber, with optimized trench-assisted index profile using our own standard process suitable for mass production. 8 Zero Dispersion Wavelength (λ0): 300 nm λ0 324 nm Zero Dispersion Slope (S0) ps/(nm2 km) - Maximum Individual Fiber PMD: 0.2 ps/ km * PMDQ: PMD (Polarization mode dispersion) Link Design Value calculated in accordance with IEC :200, section 5.5, Method, September 200 Superior bending performance (Beyond G.657.B3) In-home or MDU applications such as sharp corner bend, stapling etc. Solid structure: Good mechanical reliability and Easy to splicing with conventional SMF Protection of fiber coating degradation in case high power systems Low water peak fiber Cladding Diameter: 25.0 ± 0.7 μm Coating-cladding Concentricity: 0 μm Multi dwelling units (MDUs) In-home wiring (Curl-cord) FTTx network Accesss network Drop cable * Induced attenuation (db / km) -0 ~ 85 C up to 98% RH * At 30 nm, nm and nm GPa (00 Kpsi) Point Discontinuity (@30 nm & nm) db Cable Cutoff Wavelength (λcc) 260 nm.0 ~ 8.9 N.0 ~ 5.0 N ± 0.4 3

6 UltraPass The optical fiber that enables the lowest cost per bit transport Non-zero dispersion-shifted Fiber (ITU-T G.656) U ltrapass fiber is advanced Non-Zero Dispersion Shifted Fiber (NZDSF) suitable for longhaul and high speed Dense Wavelength Division Multiplexing (DWDM) networks of today and tomorrow. Its intentionally designed dispersion characteristics reduce various nonlinear effects which are particularly deleterious in dense wavelength division multiplexing systems. It enables network operators to use wide wavelength operating window throughout the wavelength range of 460~ nm (S, C and L band) to cope with ever growing demand for more bandwidth. The industry leading low PMD makes the fiber suitable for use in 0 Gb/s or even higher speed DWDM networks. UltraPass fiber complies with ITU-T G.656 requirements, which are more advanced standards for wide band optical transmission where Samsung has significantly contributed in the standardization process. 9.2 ± ~ ~ ~ 8.0 ~ Maximum Individual Fiber PMD: 0. ps/ km * PMDQ: PMD (Polarization mode dispersion) Link Design Value calculated in accordance with IEC :200, section 5.5, Method, September 200 Optimized for long haul and metro network Tested and passed all the applicable requirements of Telcordia GR-20, Issue 3 Expanded bandwidth (S + C + L) for DWDM Optimized dispersion for EDFA/Raman system Large effective area for low non-linear effects Low PMDQ for 40G or higher (<0.06 ps/km/2) Metro loop transmission cables Optimized for long-haul and ultra-long transmission Cladding Diameter: 25.0 ± 0.7 μm Coating-cladding Concentricity: 0 μm Induced attenuation (db / km) -0 ~ 85 C up to 98% RH Point Discontinuity (@ nm) db Cable Cutoff Wavelength (λcc) 300 nm Attenuation vs. Wavelength 0.69 GPa (00 Kpsi) 525 nm ~ 565 nm wavelength range The attenuation in the above wavelength range does not exceed the attenuation at nm by more than 0.02 db/km nm wavelength range The attenuation in the above wavelength range does not exceed the attenuation at nm by more than 0.03 db/km.0 ~ 8.9 N.0 ~ 5.0 N 8 4 Zero Dispersion Wavelength (λ0) 440 nm Zero Dispersion Slope ps/(nm2 km)

JFOC-BSG2D MODEL:JFOC-BSG2D. optic.com. For detailed inquiry please contact our sales team at:

JFOC-BSG2D MODEL:JFOC-BSG2D. optic.com. For detailed inquiry please contact our sales team at: JFOC-BSG2D MODEL:JFOC-BSG2D For detailed inquiry please contact our sales team at: market@jfiber optic.com Description : JFOC-BSG2D dispersion unshifted singlemode fiber is designed specially for optical