Automated Bearing Wear Detection

Size: px
Start display at page:

Download "Automated Bearing Wear Detection"

Transcription

1 Mike Cannon DLI Engineering Automated Bearing Wear Detection DLI Engr Corp - 1

2 DLI Engr Corp - 2 Vibration: an indicator of machine condition

3 Narrow band Vibration Analysis DLI Engr Corp - 3 Vibration Contents by Frequency FFT Spectral Analysis Identify Peaks & Patterns - Relationship to machinery components Amplitude of peak comparison to baseline Diagnosis and severity of machine problem Repair recommendations Specific to problem Priority and Remaining life

4 Time Domain & Frequency Domain Vibration Wave Form A complex signal is the sum of several sine waves V i b r a t i o n S p e c t r u m A m p l i t u d e v s. t i m e F r e q u e n c y DLI Engr Corp - 4

5 Vibration Data Acquisition & Processing Analog Signal is Digitized Vibration Signal DLI Engr Corp - 5

6 Forcing Frequencies Rotation Rate of Fan Five-Blades on Fan DLI Engr Corp - 6 Fly swatter against the blades

7 Forcing Frequencies in Spectra IPS 1X RPM Fly Swatter DLI Engr Corp Orders 18

8 Results = Problems Identified Detection Diagnosis & Prognosis Motor Gear Cprsr of specific problems Imbalance Out-of-round Journal Misalignment Gear Problems Bearings (BAD /COCKED) Impeller Blade Problems DLI Engr Corp - 8 Bent shaft Looseness Magnetic Noise Electrical Noise

9 Accurate results from quality data Triaxial Sensor All 3 axes - more complete analysis Improves accuracy of diagnosis Permanently Mounted Stud Excellent frequency response Repeatability = accurate trending Barcoding Faster and more accurate Prevents human error WATCHMAN TEST POINT DLI Engr Corp - 9 DO NOT PAINT

10 Baseline Data to define the healthy machine 800 Alarm Levels DLI Engr Corp - 10

11 Order Normalization DLI Engr Corp - 11 Amplitude VdB Conventional Vibration Spectrum 1800 rpm component Frequency 0-18,000 RPM

12 Order Normalization Order Normalized Vibration Spectrum DLI Engr Corp - 12 Amplitude in VdB Frequency in Orders (multiples of rotation rate)

13 Results from Vibration Analysis Level LevelII Reports Level LevelIIII Trends Trends DLI Engr Corp - 13 Level LevelIII III Signatures

14 MCA Results - Summary Report 1. MANDATORY Repair Recommendations AIR CONDITIONING SALTWATER CIRCULATING PUMP #3 Mandatory: Overhaul unit. AUXILIARY MACHINERY COOLING WATER PUMP #2B Mandatory: Align Motor and Pump. 2. IMPORTANT Repair Recommendations MAIN CONDENSATE PUMP (MD) #1A Important: Replace motor bearings. Desirable: Monitor pump bearings for increased vibration. LUBE OIL SERVICE PUMP (ATTACHED) #1C Important: Inspect bevel gears for proper meshing; if satisfactory, check intermediate shaft bearings for looseness. DLI Engr Corp - 14 TURBO-GENERATOR (60HZ) #8 Important: Inspect accessory drive shaft for proper bearing fit and clearances.

15 Trend Reports Replaced Bearing Increased Frequency of Data Collection DLI Engr Corp - 15 Greased Bearing

16 Automated Diagnostic Systems Input Internal Functions Output DLI Engr Corp - 16 Vibration sensors Accelerometers & prox probes Process and performance data Portable or Online systems OSI Pi Database FFT spectrum, cepstrum & demod Triaxial, order-normalized data Machine specific, statistical baselines Feature extraction & exceedance tables 4700 fault templates Score & trend specific fault severities Specific faults & severity Repair recommendations & pager ALERTs Network replication OPC & XML connectivity Web Connect browser access

17 Automated Diagnostic System Flow Chart Incoming Spectra Complete sets of high resolution vibe data for FFT, cepstrum & demod What machine is this & what are its vibration sources? Machine configuration data, (VTAGs) coupled with component specific fault templates How does this spectra compare to that of a healthy machine? Feature extraction and exceedance table What, if anything, is wrong with this machine and how bad is it? Detection diagnosis & prognosis DLI Engr Corp - 17 Machinery Fault Report Actionable Information

18 Component Codes NOTE: This illustrated set is not complete 1 Motor Driven Close Coupled Pumps/Fans 2 Turbines 3 3 Motors Motors 4 Gearboxes 5 Linked Drives (Belt/chain) 6 Pumps Pumps Centrifugal Centrifugal 7 Rotary Thread Pumps 8 Sliding Vane Pumps 9 Axial Piston Pumps 10 Fans DLI Engr Corp Centrifugal Compressors 12 Piston Compressors 13 Generators 14 Centrifugal Purifiers Couplings Couplings

19 Features from comparison to baseline DLI Engr Corp - 19 AVERAGE AVERAGE AVERAGE AVERAGE SIGMA SIGMA AVERAGE AVERAGE SIGMAS SIGMAS

20 DLI Engr Corp - 20 Extracted Forcing Frequencies

21 DLI Engr Corp - 21 Extracted Bearing Tones (3.1x)

22 Fault Template Diagnosis Rules Misalignment (Parallel) 1. 2X Radial or Tangential > 95VdB & > 2 VdB above Baseline on both sides of the coupling 2. 2X Radial > 1X Radial or 2x Tangential > 1X Tangential for one side of the coupling DLI Engr Corp The Maximum 2X > 101VdB or The sum of 2X exceedances > 18 VdB for at least one side of the coupling.

23 Fault Models / Diagnostic Flow COMPONENT CODES MOTOR FAULT TEMPLATES CSDM SCREENING OUTPUT TABLE MACHINE DATA CSDM COUPLING CENTRIFUGAL PUMP CSDM DLI Engr Corp - 23 (CSDM = Component Specific Data Matrix)

24 Results from Automated Diagnostics Provides the most efficient machinery fault detection, diagnosis & prognosis to insure: Immediate local fault detection & actionable information Optimal asset reliability and machine life extension through prognosis of how & when machine should be repaired DLI Engr Corp - 24

25 Rolling Element Bearing Detection Fault Indicators in Vibration Spectra Bearing Tones Sidebands Non-integer peaks and harmonics relative to component rotation rate Noise floor elevation DLI Engr Corp - 25 High frequency indicators Impact and Ringing Modulation

26 Rolling Element Bearing Geometry Snap ring groove Seal/shield groove & notch Ball Inner ring Outside diameter Bore Inner race Cage DLI Engr Corp - 26 Inner ring face Outer ring face Outer race Outer ring

27 Bearing Tones Ball Diameter (BD) DLI Engr Corp - 27 Pitch Diameter (PD) Ball Pass Frequency Inner Race BPFI Ball Pass Frequency Outer Race BPFO Ball Spin Frequency BSF Bearing Train Frequency FTF

28 DLI Engr Corp - 28 Rolling Element Bearings

29 Bearing Tones DLI Engr Corp - 29 Pitch Diameter (PD) n B BPFI 2 1 P BPFO n B 2 1 P P B Bd 2 P d cos RPM cos RPM d d Ball Diameter (BD) BSF 1 cos FTF 1 Bd 2 1 P d d d d d 2 cos RPM 2 RPM

30 Simplified Bearing Tones Non-Synchronous Components BPFO = Rollers x rpm x 0.4 BPFI = Rollers x rpm x 0.6 FTF = rpm x 0.4 Sidebands Usually 1X Around BPFI May be FTF Around Bearing Tones DLI Engr Corp - 30

31 Rolling Element Bearings For each shaft revolution: 4.6 balls will pass an outer race defect The ball will make 2.02 revolutions 7.4 balls will pass an inner race defect DLI Engr Corp - 31 The cage will make 0.38 revolutions

32 Calculated Bearing Tones Bearing tones do not always appear at the expected, calculated frequencies User does not always have correct bearing information Diagnostic System designed to work independently of calculated bearing frequencies User may overlay calculated frequencies on graph if desired DLI Engr Corp - 32

33 Non-Synchronous Tones DLI Engr Corp - 33 Synchronous Components are integer multiples of shaft rotation rate 140 Bearing tones are non-integer multiples of shaft rate Shaft Rotation Shaft Rate Harmonics Bearing Tone 4.6 x Sidebands 2.6x, 3.6x, 5.6x VdB Orders Bearing Tone X

34 Automated Spectral Peak Extraction Identify Shaft Rate Peak(s) Identify Harmonics of Shaft Rate(s) Identify Forcing Frequencies Identify External Vibration Extract non-defined, non-synchronous peaks as possible bearing tone candidates. DLI Engr Corp - 34

35 Summary of Analysis Techniques Data Normalization Automated Spectral Peak Extraction Cepstrum Analysis Noise Floor Calculation Rule-Based Diagnostics Demodulation DLI Engr Corp - 35

36 Cepstrum Analysis The Spectrum of the Spectrum 140 VdB CdB CPM (x 1000) Bearing Tones 1X Harmonics DLI Engr Corp Time, Seconds

37 The Cepstrum Extracts Periodicities From the Spectrum Separates Different Harmonic Series Separates Sideband Families Is Useful in Automating Bearing Wear Detection Bearing Model Is Not Required!!! Is this bearing tone candidate part of a family of peaks? # = Yes DLI Engr Corp - 37

38 DLI Engr Corp - 38 Spectral Data: Bearing Tone at 3.1x

39 Put it all together (Cont d) 3.1X 6.2X 24.8X 9.3X 12.5X 15.5X 52.7X DLI Engr Corp - 39

40 DLI Engr Corp - 40 Extracted Bearing Tones (3.1x)

41 Summary of Analysis Techniques Data Normalization Automated Spectral Peak Extraction Cepstrum Analysis Noise Floor Calculation Rule-Based Diagnostics Demodulation DLI Engr Corp - 41

42 High Noise Floor 120 VdB DLI Engr Corp - 42 CPM ( X 1000 )

43 Summary of Analysis Techniques Data Normalization Automated Spectral Peak Extraction Cepstrum Analysis Noise Floor Calculation Rule-Based Diagnostics Demodulation DLI Engr Corp - 43

44 DLI Engr Corp - 44 Amplitude Modulated Wave Form and its Spectrum

45 Bearing Impact Faults High-Frequency Damped Oscillation Spall Acceleration Wave Form DLI Engr Corp - 45 Demodulaterd Waveform

46 DLI Engr Corp - 46 Demodulation Bearing Analysis

47 Bearing Faults DLI Engr Corp - 47 BPFO Frequency

48 DLI Engr Corp - 48 Demodulation Data: Bearing Tone at 3.1x

49 Amplitude Demodulation Early Warning of Bearing Wear Confirmation of Bearing Wear Better Information on Which Bearing is Defective DLI Engr Corp - 49

50 DLI Engr Corp - 50 Bearing Faults Typical Ranges

51 Diagnostic Report DLI Engr Corp - 51 FIRE PUMP #2 Acquired: 8/19/03 10:35:38 AM 1xM = 1191 RPM Averages: 3 RECOMMENDATIONS: MANDATORY: REPLACE MOTOR BEARINGS DIAGNOSES: EXTREME MOTOR BEARING WEAR (+0.042) in/s at 3.11xM on 2A in low range (+0.025) in/s at 6.22xM on 2A in low range (+0.030) in/s at 9.33xM on 2R in low range (+0.077) in/s at 9.33xM on 2T in low range (+0.000) in/s at 24.8xM on 2A in high range (+0.084) in/s at 3.11xM on 2R in low range (+0.021) in/s at 15.5xM on 2R in high range (+0.011) in/s at 12.5xM on 2R in high range (+0.036) in/s at 3.11xM on 2T in low range (+0.001) in/s noise floor (+0.001) in/s noise floor (+0.001) in/s noise floor MOTOR BALL BEARING DEMOD Bearing tone harmonics in demod spectrum with direct match between regular and demod spectrum in 2R 21 db peak at 9.33x on 2R

52 DLI Engr Corp - 52 Put it all together

53 Bearing The Movie DLI Engr Corp - 53 The life and times of a troubled bearing

54 Progression of Bearing Faults VdB Machine without Bearing Problems 120 1X X 90 3X 80 4X DLI Engr Corp ORDERS 4 5 6

55 Progression of Bearing Faults VdB Slight Bearing Tones at 3.1X 120 1X X 90 3X 80 4X DLI Engr Corp ORDERS 4 5 6

56 Progression of Bearing Faults VdB As defect worsens - 2nd harmonic rises 120 1X X 90 3X 80 4X DLI Engr Corp ORDERS 4 5 6

57 Progression of Bearing Faults Increased machine looseness - 1X harmonics increase VdB 120 1X 110 2X 100 3X 4X DLI Engr Corp ORDERS

58 Progression of Bearing Faults VdB 1X Sidebands around the Bearing Tone 120 1X 110 2X 100 3X 4X DLI Engr Corp ORDERS

59 Progression of Bearing Faults VdB Haystack in Noise Floor appears as Wear Progresses 120 1X 110 2X 100 3X 4X DLI Engr Corp ORDERS

60 Bearing Tone Sidebands Bearing Tone VdB Sidebands spaced at FTF DLI Engr Corp ORDERS 4 5 6

61 Progression of Bearing Faults VdB Entire Noise Floor rises in advanced stages 120 1X 110 2X 100 3X 4X DLI Engr Corp ORDERS

62 Progression of Bearing Faults VdB Machine Failure DLI Engr Corp ORDERS

63 DLI Engr Corp - 63 Summary of Analysis Techniques Data Normalization Automated Spectral Peak Extraction Cepstrum Analysis Noise Floor Calculation Rule-Based Diagnostics Demodulation

64 Key elements in a successful MCA Information, not Data Measurement Methodology Triaxial Data Collection with mounting pad (Complete data set & improved high frequency signal: Portable/Walk-around approach) Superior Data Screening (Statistic baseline in hi/low freq range & automated, narrow band data comparison) Analysis / Diagnostics / Prognosis Automated Diagnostic Report with severity, fault and prioritized repair recommendation (information NOT just data) Information Everywhere Distribution of Information DLI Engr Corp - 64 Simple, machine condition report/fault notification available via: Internet or automated pager, , text message Delivering Machine Intelligence

65 Delivering Machine Intelligence DLI Engr Corp - 65 Visit our web site at:

AUTOMATED BEARING WEAR DETECTION. Alan Friedman

AUTOMATED BEARING WEAR DETECTION. Alan Friedman AUTOMATED BEARING WEAR DETECTION Alan Friedman DLI Engineering 253 Winslow Way W Bainbridge Island, WA 98110 PH (206)-842-7656 - FAX (206)-842-7667 info@dliengineering.com Published in Vibration Institute

More information

Of interest in the bearing diagnosis are the occurrence frequency and amplitude of such oscillations.

Of interest in the bearing diagnosis are the occurrence frequency and amplitude of such oscillations. BEARING DIAGNOSIS Enveloping is one of the most utilized methods to diagnose bearings. This technique is based on the constructive characteristics of the bearings and is able to find shocks and friction

More information

DETECTING AND PREDICTING DETECTING

DETECTING AND PREDICTING DETECTING 3/13/28 DETECTING AND PREDICTING MW WIND TURBINE DRIVE TRAIN FAILURES Adopted for Wind Power Management class http://www.icaen.uiowa.edu/~ie_155/ by Andrew Kusiak Intelligent Systems Laboratory 2139 Seamans

More information

Presented By: Michael Miller RE Mason

Presented By: Michael Miller RE Mason Presented By: Michael Miller RE Mason Operational Challenges of Today Our target is zero unplanned downtime Maximize Equipment Availability & Reliability Plan ALL Maintenance HOW? We are trying to be competitive

More information

Appearance of wear particles. Time. Figure 1 Lead times to failure offered by various conventional CM techniques.

Appearance of wear particles. Time. Figure 1 Lead times to failure offered by various conventional CM techniques. Vibration Monitoring: Abstract An earlier article by the same authors, published in the July 2013 issue, described the development of a condition monitoring system for the machinery in a coal workshop

More information

Also, side banding at felt speed with high resolution data acquisition was verified.

Also, side banding at felt speed with high resolution data acquisition was verified. PEAKVUE SUMMARY PeakVue (also known as peak value) can be used to detect short duration higher frequency waves stress waves, which are created when metal is impacted or relieved of residual stress through

More information

PeakVue Analysis for Antifriction Bearing Fault Detection

PeakVue Analysis for Antifriction Bearing Fault Detection Machinery Health PeakVue Analysis for Antifriction Bearing Fault Detection Peak values (PeakVue) are observed over sequential discrete time intervals, captured, and analyzed. The analyses are the (a) peak

More information

APPLICATION NOTE. Detecting Faulty Rolling Element Bearings. Faulty rolling-element bearings can be detected before breakdown.

APPLICATION NOTE. Detecting Faulty Rolling Element Bearings. Faulty rolling-element bearings can be detected before breakdown. APPLICATION NOTE Detecting Faulty Rolling Element Bearings Faulty rolling-element bearings can be detected before breakdown. The simplest way to detect such faults is to regularly measure the overall vibration

More information

Bearing Fault Diagnosis

Bearing Fault Diagnosis Quick facts Bearing Fault Diagnosis Rolling element bearings keep our machines turning - or at least that is what we expect them to do - the sad reality however is that only 10% of rolling element bearings

More information

Rotating Machinery Fault Diagnosis Techniques Envelope and Cepstrum Analyses

Rotating Machinery Fault Diagnosis Techniques Envelope and Cepstrum Analyses Rotating Machinery Fault Diagnosis Techniques Envelope and Cepstrum Analyses Spectra Quest, Inc. 8205 Hermitage Road, Richmond, VA 23228, USA Tel: (804) 261-3300 www.spectraquest.com October 2006 ABSTRACT

More information

Machinery Fault Diagnosis

Machinery Fault Diagnosis Machinery Fault Diagnosis A basic guide to understanding vibration analysis for machinery diagnosis. 1 Preface This is a basic guide to understand vibration analysis for machinery diagnosis. In practice,

More information

Overall vibration, severity levels and crest factor plus

Overall vibration, severity levels and crest factor plus Overall vibration, severity levels and crest factor plus By Dr. George Zusman, Director of Product Development, PCB Piezotronics and Glenn Gardner, Business Unit Manager, Fluke Corporation White Paper

More information

Machine Diagnostics in Observer 9 Private Rules

Machine Diagnostics in Observer 9 Private Rules Application Note Machine Diagnostics in SKF @ptitude Observer 9 Private Rules Introduction When analysing a vibration frequency spectrum, it can be a difficult task to find out which machine part causes

More information

Benefits of Implementing a Basic Vibration Analysis Program for Power Transmission Drives

Benefits of Implementing a Basic Vibration Analysis Program for Power Transmission Drives Benefits of Implementing a Basic Vibration Analysis Program for Power Condition monitoring Vibration analysis is a powerful tool that when integrated into an overall inspection program will help save maintenance

More information

VIBRATION SIGNATURE ANALYSIS OF THE BEARINGS FROM FAN UNIT FOR FRESH AIR IN THERMO POWER PLANT REK BITOLA

VIBRATION SIGNATURE ANALYSIS OF THE BEARINGS FROM FAN UNIT FOR FRESH AIR IN THERMO POWER PLANT REK BITOLA VIBRATION SIGNATURE ANALYSIS OF THE BEARINGS FROM FAN UNIT FOR FRESH AIR IN THERMO POWER PLANT REK BITOLA Prof. Geramitchioski T. PhD. 1, Doc.Trajcevski Lj. PhD. 2 Faculty of Technical Science University

More information

Detection of Wind Turbine Gear Tooth Defects Using Sideband Energy Ratio

Detection of Wind Turbine Gear Tooth Defects Using Sideband Energy Ratio Wind energy resource assessment and forecasting Detection of Wind Turbine Gear Tooth Defects Using Sideband Energy Ratio J. Hanna Lead Engineer/Technologist jesse.hanna@ge.com C. Hatch Principal Engineer/Technologist

More information

A Novel Approach to Electrical Signature Analysis

A Novel Approach to Electrical Signature Analysis A Novel Approach to Electrical Signature Analysis Howard W Penrose, Ph.D., CMRP Vice President, Engineering and Reliability Services Dreisilker Electric Motors, Inc. Abstract: Electrical Signature Analysis

More information

Condition based monitoring: an overview

Condition based monitoring: an overview Condition based monitoring: an overview Acceleration Time Amplitude Emiliano Mucchi Universityof Ferrara Italy emiliano.mucchi@unife.it Maintenance. an efficient way to assure a satisfactory level of reliability

More information

Bearing fault detection of wind turbine using vibration and SPM

Bearing fault detection of wind turbine using vibration and SPM Bearing fault detection of wind turbine using vibration and SPM Ruifeng Yang 1, Jianshe Kang 2 Mechanical Engineering College, Shijiazhuang, China 1 Corresponding author E-mail: 1 rfyangphm@163.com, 2

More information

DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE

DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE Prof. Geramitchioski T. PhD. 1, Doc.Trajcevski Lj. PhD. 1, Prof. Mitrevski V. PhD. 1, Doc.Vilos I.

More information

IMPACT DEMODULATION. An Over-Sampling Signal Processing Technique Used to Diagnose Bearing Faults

IMPACT DEMODULATION. An Over-Sampling Signal Processing Technique Used to Diagnose Bearing Faults IMPACT DEMODULATION An Over-Sampling Signal Processing Technique Used to Diagnose Bearing Faults 2018 by Azima. All Rights Reserved. Part Number: 80004240-1 AZIMA DLI HEADQUARTERS: 300 Trade Center, Suite

More information

Bearing Wear Example #1 Inner Race Fault Alan Friedman DLI Engineering

Bearing Wear Example #1 Inner Race Fault Alan Friedman DLI Engineering Bearing Wear Example #1 Inner Race Fault Alan Friedman DLI Engineering The following spectrum comes from the motor end of a horizontally oriented centrifugal pump. The data was taken in the vertical axis.

More information

CHAPTER 3 DEFECT IDENTIFICATION OF BEARINGS USING VIBRATION SIGNATURES

CHAPTER 3 DEFECT IDENTIFICATION OF BEARINGS USING VIBRATION SIGNATURES 33 CHAPTER 3 DEFECT IDENTIFICATION OF BEARINGS USING VIBRATION SIGNATURES 3.1 TYPES OF ROLLING ELEMENT BEARING DEFECTS Bearings are normally classified into two major categories, viz., rotating inner race

More information

DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE

DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE DETECTION THE CONDITION OF A FAN TRANSMISSION IN METAL SMELTER FENI KAVADARCI USING VIBRATION SIGNATURE Prof. Geramitchioski T. PhD. 1, Doc.Trajcevski Lj. PhD. 1, Prof. Mitrevski V. PhD. 1, Doc.Vilos I.

More information

FAULT DETECTION IN DEEP GROOVE BALL BEARING USING FFT ANALYZER

FAULT DETECTION IN DEEP GROOVE BALL BEARING USING FFT ANALYZER FAULT DETECTION IN DEEP GROOVE BALL BEARING USING FFT ANALYZER Sushmita Dudhade 1, Shital Godage 2, Vikram Talekar 3 Akshay Vaidya 4, Prof. N.S. Jagtap 5 1,2,3,4, UG students SRES College of engineering,

More information

Vibration Monitoring for Defect Diagnosis on a Machine Tool: A Comprehensive Case Study

Vibration Monitoring for Defect Diagnosis on a Machine Tool: A Comprehensive Case Study Vibration Monitoring for Defect Diagnosis on a Machine Tool: A Comprehensive Case Study Mouleeswaran Senthilkumar, Moorthy Vikram and Bhaskaran Pradeep Department of Production Engineering, PSG College

More information

University of Huddersfield Repository

University of Huddersfield Repository University of Huddersfield Repository Ball, Andrew, Wang, Tian T., Tian, X. and Gu, Fengshou A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,

More information

Acceleration Enveloping Higher Sensitivity, Earlier Detection

Acceleration Enveloping Higher Sensitivity, Earlier Detection Acceleration Enveloping Higher Sensitivity, Earlier Detection Nathan Weller Senior Engineer GE Energy e-mail: nathan.weller@ps.ge.com Enveloping is a tool that can give more information about the life

More information

Frequency Response Analysis of Deep Groove Ball Bearing

Frequency Response Analysis of Deep Groove Ball Bearing Frequency Response Analysis of Deep Groove Ball Bearing K. Raghavendra 1, Karabasanagouda.B.N 2 1 Assistant Professor, Department of Mechanical Engineering, Bellary Institute of Technology & Management,

More information

CHAPTER 7 FAULT DIAGNOSIS OF CENTRIFUGAL PUMP AND IMPLEMENTATION OF ACTIVELY TUNED DYNAMIC VIBRATION ABSORBER IN PIPING APPLICATION

CHAPTER 7 FAULT DIAGNOSIS OF CENTRIFUGAL PUMP AND IMPLEMENTATION OF ACTIVELY TUNED DYNAMIC VIBRATION ABSORBER IN PIPING APPLICATION 125 CHAPTER 7 FAULT DIAGNOSIS OF CENTRIFUGAL PUMP AND IMPLEMENTATION OF ACTIVELY TUNED DYNAMIC VIBRATION ABSORBER IN PIPING APPLICATION 7.1 INTRODUCTION Vibration due to defective parts in a pump can be

More information

CASE STUDY: Roller Mill Gearbox. James C. Robinson. CSI, an Emerson Process Management Co. Lal Perera Insight Engineering Services, LTD.

CASE STUDY: Roller Mill Gearbox. James C. Robinson. CSI, an Emerson Process Management Co. Lal Perera Insight Engineering Services, LTD. CASE STUDY: Roller Mill Gearbox James C. Robinson CSI, an Emerson Process Management Co. Lal Perera Insight Engineering Services, LTD. ABSTRACT Stress Wave Analysis on a roller will gearbox employing the

More information

Application of Electrical Signature Analysis. Howard W Penrose, Ph.D., CMRP President, SUCCESS by DESIGN

Application of Electrical Signature Analysis. Howard W Penrose, Ph.D., CMRP President, SUCCESS by DESIGN Application of Electrical Signature Analysis Howard W Penrose, Ph.D., CMRP President, SUCCESS by DESIGN Introduction Over the past months we have covered traditional and modern methods of testing electric

More information

Overview of condition monitoring and vibration transducers

Overview of condition monitoring and vibration transducers Overview of condition monitoring and vibration transducers Emeritus Professor R. B. Randall School of Mechanical and Manufacturing Engineering Sydney 2052, Australia Machine Monitoring and Diagnostics

More information

Analysis of Deep-Groove Ball Bearing using Vibrational Parameters

Analysis of Deep-Groove Ball Bearing using Vibrational Parameters Analysis of Deep-Groove Ball Bearing using Vibrational Parameters Dhanush N 1, Dinesh G 1, Perumal V 1, Mohammed Salman R 1, Nafeez Ahmed.L 2 U.G Student, Department of Mechanical Engineering, Gojan School

More information

Setpoint Rolling Element Bearing Support

Setpoint Rolling Element Bearing Support Instruction Setpoint Rolling Element Bearing Support Installation and Operations Manual Keep accessible for future reference Trademarks and Copyrights All trademarks, service marks, and/or registered trademarks

More information

Bearing Fault Detection and Diagnosis with m+p SO Analyzer

Bearing Fault Detection and Diagnosis with m+p SO Analyzer www.mpihome.com Application Note Bearing Fault Detection and Diagnosis with m+p SO Analyzer Early detection and diagnosis of bearing faults FFT analysis Envelope analysis m+p SO Analyzer dynamic data acquisition,

More information

Beating Phenomenon of Multi-Harmonics Defect Frequencies in a Rolling Element Bearing: Case Study from Water Pumping Station

Beating Phenomenon of Multi-Harmonics Defect Frequencies in a Rolling Element Bearing: Case Study from Water Pumping Station Beating Phenomenon of Multi-Harmonics Defect Frequencies in a Rolling Element Bearing: Case Study from Water Pumping Station Fathi N. Mayoof Abstract Rolling element bearings are widely used in industry,

More information

The effective vibration speed of web offset press

The effective vibration speed of web offset press IMEKO 20 th TC3, 3 rd TC16 and 1 st TC22 International Conference Cultivating metrological knowledge 27 th to 30 th November, 2007. Merida, Mexico. The effective vibration speed of web offset press Abstract

More information

Presentation at Niagara Falls Vibration Institute Chapter January 20, 2005

Presentation at Niagara Falls Vibration Institute Chapter January 20, 2005 Monitoring Gear Boxes with PeakVue Presentation at Niagara Falls Vibration Institute Chapter January 20, 2005 1 WHAT IS A STRESS WAVE? 2 Hertz Theory Prediction for Various Size Metal Balls 3 Frequencies

More information

VIBRATION MONITORING TECHNIQUES INVESTIGATED FOR THE MONITORING OF A CH-47D SWASHPLATE BEARING

VIBRATION MONITORING TECHNIQUES INVESTIGATED FOR THE MONITORING OF A CH-47D SWASHPLATE BEARING VIBRATION MONITORING TECHNIQUES INVESTIGATED FOR THE MONITORING OF A CH-47D SWASHPLATE BEARING Paul Grabill paul.grabill@iac-online.com Intelligent Automation Corporation Poway, CA 9064 Jonathan A. Keller

More information

Vibration Analysis of deep groove ball bearing using Finite Element Analysis

Vibration Analysis of deep groove ball bearing using Finite Element Analysis RESEARCH ARTICLE OPEN ACCESS Vibration Analysis of deep groove ball bearing using Finite Element Analysis Mr. Shaha Rohit D*, Prof. S. S. Kulkarni** *(Dept. of Mechanical Engg.SKN SCOE, Korti-Pandharpur,

More information

DIAGNOSIS OF ROLLING ELEMENT BEARING FAULT IN BEARING-GEARBOX UNION SYSTEM USING WAVELET PACKET CORRELATION ANALYSIS

DIAGNOSIS OF ROLLING ELEMENT BEARING FAULT IN BEARING-GEARBOX UNION SYSTEM USING WAVELET PACKET CORRELATION ANALYSIS DIAGNOSIS OF ROLLING ELEMENT BEARING FAULT IN BEARING-GEARBOX UNION SYSTEM USING WAVELET PACKET CORRELATION ANALYSIS Jing Tian and Michael Pecht Prognostics and Health Management Group Center for Advanced

More information

Prognostic Health Monitoring for Wind Turbines

Prognostic Health Monitoring for Wind Turbines Prognostic Health Monitoring for Wind Turbines Wei Qiao, Ph.D. Director, Power and Energy Systems Laboratory Associate Professor, Department of ECE University of Nebraska Lincoln Lincoln, NE 68588-511

More information

Fault Diagnosis of Wind Turbine Gearboxes Using Enhanced Tacholess Order Tracking

Fault Diagnosis of Wind Turbine Gearboxes Using Enhanced Tacholess Order Tracking Fault Diagnosis of Wind Turbine Gearboxes Using Enhanced Tacholess Order Tracking M ohamed A. A. Ismail 1, Nader Sawalhi 2 and Andreas Bierig 1 1 German Aerospace Centre (DLR), Institute of Flight Systems,

More information

Prediction of Defects in Roller Bearings Using Vibration Signal Analysis

Prediction of Defects in Roller Bearings Using Vibration Signal Analysis World Applied Sciences Journal 4 (1): 150-154, 2008 ISSN 1818-4952 IDOSI Publications, 2008 Prediction of Defects in Roller Bearings Using Vibration Signal Analysis H. Mohamadi Monavar, H. Ahmadi and S.S.

More information

An Introduction to Time Waveform Analysis

An Introduction to Time Waveform Analysis An Introduction to Time Waveform Analysis Timothy A Dunton, Universal Technologies Inc. Abstract In recent years there has been a resurgence in the use of time waveform analysis techniques. Condition monitoring

More information

Vibration based condition monitoring of rotating machinery

Vibration based condition monitoring of rotating machinery Vibration based condition monitoring of rotating machinery Goutam Senapaty 1* and Sathish Rao U. 1 1 Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy

More information

Enhanced Fault Detection of Rolling Element Bearing Based on Cepstrum Editing and Stochastic Resonance

Enhanced Fault Detection of Rolling Element Bearing Based on Cepstrum Editing and Stochastic Resonance Journal of Physics: Conference Series Enhanced Fault Detection of Rolling Element Bearing Based on Cepstrum Editing and Stochastic Resonance To cite this article: Xiaofei Zhang et al 2012 J. Phys.: Conf.

More information

A simulation of vibration analysis of crankshaft

A simulation of vibration analysis of crankshaft RESEARCH ARTICLE OPEN ACCESS A simulation of vibration analysis of crankshaft Abhishek Sharma 1, Vikas Sharma 2, Ram Bihari Sharma 2 1 Rustam ji Institute of technology, Gwalior 2 Indian Institute of technology,

More information

Vibration and Current Monitoring for Fault s Diagnosis of Induction Motors

Vibration and Current Monitoring for Fault s Diagnosis of Induction Motors Vibration and Current Monitoring for Fault s Diagnosis of Induction Motors Mariana IORGULESCU, Robert BELOIU University of Pitesti, Electrical Engineering Departament, Pitesti, ROMANIA iorgulescumariana@mail.com

More information

Review on Fault Identification and Diagnosis of Gear Pair by Experimental Vibration Analysis

Review on Fault Identification and Diagnosis of Gear Pair by Experimental Vibration Analysis Review on Fault Identification and Diagnosis of Gear Pair by Experimental Vibration Analysis 1 Ajanalkar S. S., 2 Prof. Shrigandhi G. D. 1 Post Graduate Student, 2 Assistant Professor Mechanical Engineering

More information

VIBRATION MONITORING OF GEARBOXES

VIBRATION MONITORING OF GEARBOXES SENSORS FOR MACHINERY HEALTH MONITORING WHITE PAPER #X1 VIBRATION MONITORING OF GEARBOXES Written By James C. Robinson, Technical Consultant, IMI division of PCB Piezotronics Curated By Meredith Christman,

More information

SEPARATING GEAR AND BEARING SIGNALS FOR BEARING FAULT DETECTION. Wenyi Wang

SEPARATING GEAR AND BEARING SIGNALS FOR BEARING FAULT DETECTION. Wenyi Wang ICSV14 Cairns Australia 9-12 July, 27 SEPARATING GEAR AND BEARING SIGNALS FOR BEARING FAULT DETECTION Wenyi Wang Air Vehicles Division Defence Science and Technology Organisation (DSTO) Fishermans Bend,

More information

THEORETICAL AND EXPERIMENTAL STUDIES ON VIBRATIONS PRODUCED BY DEFECTS IN DOUBLE ROW BALL BEARING USING RESPONSE SURFACE METHOD

THEORETICAL AND EXPERIMENTAL STUDIES ON VIBRATIONS PRODUCED BY DEFECTS IN DOUBLE ROW BALL BEARING USING RESPONSE SURFACE METHOD IJRET: International Journal of Research in Engineering and Technology eissn: 9-6 pissn: -708 THEORETICAL AND EXPERIMENTAL STUDIES ON VIBRATIONS PRODUCED BY DEFECTS IN DOUBLE ROW BALL BEARING USING RESPONSE

More information

CONDITION MONITORING OF MACHINERY

CONDITION MONITORING OF MACHINERY CHAPTER 16 CONDITION MONITORING OF MACHINERY Joëlle Courrech Ronald L. Eshleman INTRODUCTION Condition monitoring of machinery is the measurement of various parameters related to the mechanical condition

More information

CONTINUOUS CONDITION MONITORING WITH VIBRATION TRANSMITTERS AND PLANT PLCS

CONTINUOUS CONDITION MONITORING WITH VIBRATION TRANSMITTERS AND PLANT PLCS SENSORS FOR MACHINERY HEALTH MONITORING WHITE PAPER #47 CONTINUOUS CONDITION MONITORING WITH VIBRATION TRANSMITTERS AND PLANT PLCS www.pcb.com/imi-sensors imi@pcb.com 800.828.8840 Continuous Condition

More information

Copyright 2017 by Turbomachinery Laboratory, Texas A&M Engineering Experiment Station

Copyright 2017 by Turbomachinery Laboratory, Texas A&M Engineering Experiment Station HIGH FREQUENCY VIBRATIONS ON GEARS 46 TH TURBOMACHINERY & 33 RD PUMP SYMPOSIA Dietmar Sterns Head of Engineering, High Speed Gears RENK Aktiengesellschaft Augsburg, Germany Dr. Michael Elbs Manager of

More information

Introduction*to*Machinery*Vibration*Sheet*Answer* Chapter*1:*Vibrations*Sources*and*Uses*

Introduction*to*Machinery*Vibration*Sheet*Answer* Chapter*1:*Vibrations*Sources*and*Uses* IntroductiontoMachineryVibrationSheetAnswer Chapter1:VibrationsSourcesandUses 1. 1. imposed motions related to the function - e.g. slider crank and earn 2. inadequate design - e.g. resonance 3. manufacturing

More information

Fault diagnosis of Spur gear using vibration analysis. Ebrahim Ebrahimi

Fault diagnosis of Spur gear using vibration analysis. Ebrahim Ebrahimi Fault diagnosis of Spur gear using vibration analysis Ebrahim Ebrahimi Department of Mechanical Engineering of Agricultural Machinery, Faculty of Engineering, Islamic Azad University, Kermanshah Branch,

More information

Prediction of Defects in Antifriction Bearings using Vibration Signal Analysis

Prediction of Defects in Antifriction Bearings using Vibration Signal Analysis Prediction of Defects in Antifriction Bearings using Vibration Signal Analysis M Amarnath, Non-member R Shrinidhi, Non-member A Ramachandra, Member S B Kandagal, Member Antifriction bearing failure is

More information

VIBRATION MONITORING OF VERY SLOW SPEED THRUST BALL BEARINGS

VIBRATION MONITORING OF VERY SLOW SPEED THRUST BALL BEARINGS VIBRATION MONITORING OF VERY SLOW SPEED THRUST BALL BEARINGS Vipul M. Patel and Naresh Tandon ITMME Centre, Indian Institute of Technology, Hauz Khas, New Delhi 110016, India e-mail: ntandon@itmmec.iitd.ernet.in

More information

Motor Vibration. Detect Mechanical & Electrical Motor Faults with Vibration Monitoring Instrumentation. IMI Sensors - A PCB Piezotronics Division

Motor Vibration. Detect Mechanical & Electrical Motor Faults with Vibration Monitoring Instrumentation. IMI Sensors - A PCB Piezotronics Division IMI Sensors - A PCB Piezotronics Division Motor Vibration Detect Mechanical & Electrical Motor Faults with Vibration Monitoring Instrumentation visit us at www.pcb.com/imi-sensors Predictive Maintenance

More information

Surojit Poddar 1, Madan Lal Chandravanshi 2

Surojit Poddar 1, Madan Lal Chandravanshi 2 Ball Bearing Fault etection Using Vibration Parameters Surojit Poddar 1, Madan Lal Chandravanshi 2 1 M.Tech Research Scholar 1 epartment of Mechanical Engineering, Indian school of Mines, hanbad, Jharkhand,

More information

Machine Data Acquisition. Powerful vibration data collectors, controllers, sensors, and field analyzers

Machine Data Acquisition. Powerful vibration data collectors, controllers, sensors, and field analyzers Machine Data Acquisition Powerful vibration data collectors, controllers, sensors, and field analyzers CHOOSE THE PERFECT HARDWARE DESIGN SUITED FOR YOU BRAUN, BRAINS AND BEAUTY TOTAL TRIO IS A COMPLETE

More information

Emphasising bearing tones for prognostics

Emphasising bearing tones for prognostics Emphasising bearing tones for prognostics BEARING PROGNOSTICS FEATURE R Klein, E Rudyk, E Masad and M Issacharoff Submitted 280710 Accepted 200411 Bearing failure is one of the foremost causes of breakdowns

More information

FAULT DIAGNOSIS OF ROLLING-ELEMENT BEARINGS IN A GENERATOR USING ENVELOPE ANALYSIS

FAULT DIAGNOSIS OF ROLLING-ELEMENT BEARINGS IN A GENERATOR USING ENVELOPE ANALYSIS FAULT DIAGNOSIS OF ROLLING-ELEMENT BEARINGS IN A GENERATOR USING ENVELOPE ANALYSIS Mohd Moesli Muhammad *, Subhi Din Yati, Noor Arbiah Yahya & Noor Aishah Sa at Maritime Technology Division (BTM), Science

More information

Novel Technology Based on the Spectral Kurtosis and Wavelet Transform for Rolling Bearing Diagnosis

Novel Technology Based on the Spectral Kurtosis and Wavelet Transform for Rolling Bearing Diagnosis Novel Technology Based on the Spectral Kurtosis and Wavelet Transform for Rolling Bearing Diagnosis Len Gelman 1, Tejas H. Patel 2., Gabrijel Persin 3, and Brian Murray 4 Allan Thomson 5 1,2,3 School of

More information

Research Article High Frequency Acceleration Envelope Power Spectrum for Fault Diagnosis on Journal Bearing using DEWESOFT

Research Article High Frequency Acceleration Envelope Power Spectrum for Fault Diagnosis on Journal Bearing using DEWESOFT Research Journal of Applied Sciences, Engineering and Technology 8(10): 1225-1238, 2014 DOI:10.19026/rjaset.8.1088 ISSN: 2040-7459; e-issn: 2040-7467 2014 Maxwell Scientific Publication Corp. Submitted:

More information

Vibration analysis for fault diagnosis of rolling element bearings. Ebrahim Ebrahimi

Vibration analysis for fault diagnosis of rolling element bearings. Ebrahim Ebrahimi Vibration analysis for fault diagnosis of rolling element bearings Ebrahim Ebrahimi Department of Mechanical Engineering of Agricultural Machinery, Faculty of Engineering, Islamic Azad University, Kermanshah

More information

ROLLING BEARING DAMAGE DETECTION AT LOW SPEED USING VIBRATION AND SHOCK PULSE MEASUREMENTS

ROLLING BEARING DAMAGE DETECTION AT LOW SPEED USING VIBRATION AND SHOCK PULSE MEASUREMENTS ROLLING BEARING DAMAGE DETECTION AT LOW SPEED USING VIBRATION AND SHOCK PULSE MEASUREMENTS Abstract Zainal Abidin 1, Andi I. Mahyuddin 2, Wawan Kurniawan Mechanical Engineering Department, FTMD Institut

More information

SpectraPro. Envelope spectrum (ESP) db scale

SpectraPro. Envelope spectrum (ESP) db scale VMI AB SWEDEN SpectraPro Envelope spectrum (ESP) db scale Release date: February 2011 Doc Ref No. AN 01469 SpectraPro Envelope Spectrum (ESP) db scale 1. Abstract SpectraPro SP17 (VER.4.17) can now show

More information

Condition Monitoring of Rotationg Equpiment s using Vibration Signature Analysis- A Review

Condition Monitoring of Rotationg Equpiment s using Vibration Signature Analysis- A Review Condition Monitoring of Rotationg Equpiment s using Vibration Signature Analysis- A Review Murgayya S B, Assistant Professor, Department of Automobile Engineering, DSCE, Bangalore Dr. H.N Suresh, Professor

More information

Multiparameter vibration analysis of various defective stages of mechanical components

Multiparameter vibration analysis of various defective stages of mechanical components SISOM 2009 and Session of the Commission of Acoustics, Bucharest 28-29 May Multiparameter vibration analysis of various defective stages of mechanical components Author: dr.ing. Doru TURCAN Abstract The

More information

Industrial vibration sensor selection: piezovelocity transducers

Industrial vibration sensor selection: piezovelocity transducers Industrial vibration sensor selection: piezovelocity transducers In many industrial monitoring applications, piezovelocity transducers have distinct advantages over piezoelectric accelerometers and traditional

More information

Industrial vibration sensor selection: Piezovelocity transducers

Industrial vibration sensor selection: Piezovelocity transducers Industrial vibration sensor selection: Piezovelocity transducers In many industrial monitoring applications, piezovelocity transducers have distinct advantages over piezoelectric accelerometers and traditional

More information

Shaft Vibration Monitoring System for Rotating Machinery

Shaft Vibration Monitoring System for Rotating Machinery 2016 Sixth International Conference on Instrumentation & Measurement, Computer, Communication and Control Shaft Vibration Monitoring System for Rotating Machinery Zhang Guanglin School of Automation department,

More information

What you discover today determines what you do tomorrow! Thomas Brown P.E. Published in Reliability Magazine Vol. 10 Issue 1, May 2003

What you discover today determines what you do tomorrow! Thomas Brown P.E. Published in Reliability Magazine Vol. 10 Issue 1, May 2003 Thomas Brown P.E. Published in Reliability Magazine Vol. 10 Issue 1, May 2003 LARGE BORE BEARINGS REBUILD OR REPLACE? ABSTRACT The decision to rebuild or replace rolling element bearings is typically made

More information

On-line Condition Monitoring Tool for Nuclear Research Reactors Coolant System Components.

On-line Condition Monitoring Tool for Nuclear Research Reactors Coolant System Components. On-line Condition Monitoring Tool for Nuclear Research Reactors Coolant System Components. Authors: Danilo Babaglio, Matias Marticorena, Martín Garrett, Oscar García Peyrano (1). Vibration Divition Nuclear

More information

DETECTION OF INCIPIENT BEARING FAULTS IN GAS TURBINE ENGINES

DETECTION OF INCIPIENT BEARING FAULTS IN GAS TURBINE ENGINES ICSV14 Cairns Australia 9-12 July, 2007 DETECTION OF INCIPIENT BEARING FAULTS IN GAS TURBINE ENGINES Abstract Michael J. Roemer, Carl S. Byington and Jeremy Sheldon Impact Technologies, LLC 200 Canal View

More information

Capacitive MEMS accelerometer for condition monitoring

Capacitive MEMS accelerometer for condition monitoring Capacitive MEMS accelerometer for condition monitoring Alessandra Di Pietro, Giuseppe Rotondo, Alessandro Faulisi. STMicroelectronics 1. Introduction Predictive maintenance (PdM) is a key component of

More information

On-Line Monitoring of Grinding Machines Gianluca Pezzullo Sponsored by: Alfa Romeo Avio

On-Line Monitoring of Grinding Machines Gianluca Pezzullo Sponsored by: Alfa Romeo Avio 11 OnLine Monitoring of Grinding Machines Gianluca Pezzullo Sponsored by: Alfa Romeo Avio Introduction The objective of this project is the development and optimization of a sensor system for machine tool

More information

Tools for Advanced Sound & Vibration Analysis

Tools for Advanced Sound & Vibration Analysis Tools for Advanced Sound & Vibration Ravichandran Raghavan Technical Marketing Engineer Agenda NI Sound and Vibration Measurement Suite Advanced Signal Processing Algorithms Time- Quefrency and Cepstrum

More information

ANALYSIS OF MACHINERY HEALTH CONSIDERING THE PARAMETERS OF VIBRATION IN A MULTI-FUNCTIONING ARRANGEMENT

ANALYSIS OF MACHINERY HEALTH CONSIDERING THE PARAMETERS OF VIBRATION IN A MULTI-FUNCTIONING ARRANGEMENT Proceedings of the International Conference on Mechanical Engineeringand Renewable Energy 2017 (ICMERE2017) 18 20 December, 2017, Chittagong, Bangladesh ICMERE2017-PI-328 ANALYSIS OF MACHINERY HEALTH CONSIDERING

More information

Comparison of vibration and acoustic measurements for detection of bearing defects

Comparison of vibration and acoustic measurements for detection of bearing defects Comparison of vibration and acoustic measurements for detection of bearing defects C. Freitas 1, J. Cuenca 1, P. Morais 1, A. Ompusunggu 2, M. Sarrazin 1, K. Janssens 1 1 Siemens Industry Software NV Interleuvenlaan

More information

Time-Frequency Enhancement Technique for Bevel Gear Fault Diagnosis

Time-Frequency Enhancement Technique for Bevel Gear Fault Diagnosis Time-Frequency Enhancement Technique for Bevel Gear Fault Diagnosis Dennis Hartono 1, Dunant Halim 1, Achmad Widodo 2 and Gethin Wyn Roberts 3 1 Department of Mechanical, Materials and Manufacturing Engineering,

More information

Fault Detection of Double Stage Helical Gearbox using Vibration Analysis Techniques

Fault Detection of Double Stage Helical Gearbox using Vibration Analysis Techniques IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 08, 2016 ISSN (online): 2321-0613 Fault Detection of Double Stage Helical Gearbox using Vibration Analysis Techniques D.

More information

Machinery Failure Analysis and Troubleshooting

Machinery Failure Analysis and Troubleshooting Machinery Failure Analysis and Troubleshooting Contents Acknowledgments Preface xiii xv Chapter 1: The Failure Analysis and Troubleshooting System 1 Troubleshooting as an Extension of Failure Analysis

More information

Application Note. Monitoring strategy Diagnosing gearbox damage

Application Note. Monitoring strategy Diagnosing gearbox damage Application Note Monitoring strategy Diagnosing gearbox damage Application Note Monitoring strategy Diagnosing gearbox damage ABSTRACT This application note demonstrates the importance of a systematic

More information

Application Note. GE Grid Solutions. Multilin 8 Series Applying Electrical Signature Analysis in 869 for Motor M&D. Overview.

Application Note. GE Grid Solutions. Multilin 8 Series Applying Electrical Signature Analysis in 869 for Motor M&D. Overview. GE Grid Solutions Multilin 8 Series Applying Electrical Signature Analysis in 869 for Motor M&D Application Note GE Publication Number: GET-20060 Copyright 2018 GE Multilin Inc. Overview Motors play a

More information

An Improved Method for Bearing Faults diagnosis

An Improved Method for Bearing Faults diagnosis An Improved Method for Bearing Faults diagnosis Adel.boudiaf, S.Taleb, D.Idiou,S.Ziani,R. Boulkroune Welding and NDT Research, Centre (CSC) BP64 CHERAGA-ALGERIA Email: a.boudiaf@csc.dz A.k.Moussaoui,Z

More information

There s Still Value in Overall Vibration Measurements By John C. Johnson Balance Plus Wichita, Kansas

There s Still Value in Overall Vibration Measurements By John C. Johnson Balance Plus Wichita, Kansas There s Still Value in Overall Vibration Measurements By John C. Johnson Balance Plus Wichita, Kansas John Johnson is owner of Balance Plus in Wichita, Kansas. He has over 29 years experience in maintenance

More information

Effect of parameters setting on performance of discrete component removal (DCR) methods for bearing faults detection

Effect of parameters setting on performance of discrete component removal (DCR) methods for bearing faults detection Effect of parameters setting on performance of discrete component removal (DCR) methods for bearing faults detection Bovic Kilundu, Agusmian Partogi Ompusunggu 2, Faris Elasha 3, and David Mba 4,2 Flanders

More information

Within reach. The standard for online machine surveillance

Within reach. The standard for online machine surveillance The standard for online machine surveillance The vbonline machinery health information system provides automated, user-scheduled monitoring of the health of your critical assets. It is a flexible, modular

More information

Motors: The Past. is Present. Hunting in the Haystack. Alignment: Fountain of Youth for Bearings. feb Windows to the IR World

Motors: The Past. is Present. Hunting in the Haystack. Alignment: Fountain of Youth for Bearings. feb Windows to the IR World uptime t h e m a g a z i n e f o r Pd M & C B M p r o f e s s i o n a l s feb 2006 Motors: The Past is Present Hunting in the Haystack Uptime is a registered trademark of NetexpressUSA, Inc. The following

More information

Practical Machinery Vibration Analysis and Predictive Maintenance

Practical Machinery Vibration Analysis and Predictive Maintenance Practical Machinery Vibration Analysis and Predictive Maintenance By Steve Mackay Dean of Engineering Engineering Institute of Technology EIT Micro-Course Series Every two weeks we present a 35 to 45 minute

More information

Envelope Analysis. By Jaafar Alsalaet College of Engineering University of Basrah 2012

Envelope Analysis. By Jaafar Alsalaet College of Engineering University of Basrah 2012 Envelope Analysis By Jaafar Alsalaet College of Engineering University of Basrah 2012 1. Introduction Envelope detection aims to identify the presence of repetitive pulses (short duration impacts) occurring

More information

Comparison of Fault Detection Techniques for an Ocean Turbine

Comparison of Fault Detection Techniques for an Ocean Turbine Comparison of Fault Detection Techniques for an Ocean Turbine Mustapha Mjit, Pierre-Philippe J. Beaujean, and David J. Vendittis Florida Atlantic University, SeaTech, 101 North Beach Road, Dania Beach,

More information

Diagnostics of Bearing Defects Using Vibration Signal

Diagnostics of Bearing Defects Using Vibration Signal Diagnostics of Bearing Defects Using Vibration Signal Kayode Oyeniyi Oyedoja Abstract Current trend toward industrial automation requires the replacement of supervision and monitoring roles traditionally

More information

Detection of an Inner Race Defect Using PeakVue

Detection of an Inner Race Defect Using PeakVue Detection of an Inner Race Defect Using PeakVue By: Aubrey Green, Lead Analyst In early January of 2012, I assumed the responsibilities of the vibration analysis program at a customer s site that had been

More information

Predictive Maintenance with Multi-Channel Analysis in Route and Analyze Mode

Predictive Maintenance with Multi-Channel Analysis in Route and Analyze Mode Machinery Health Management Predictive Maintenance with Multi-Channel Analysis in Route and Analyze Mode Presented at EuroMaintenance 2014, Helsinki, Finland, by Johan Van Puyenbroeck. Traditional route-based

More information