40 years Polytron. Our success. Strong sales agents. Service

Transcription

1 years Polytron With our Product Catalogue 2006 we start a special year: Polytron was founded 40 years ago and has, since then, built up a reputation as manufacturer and supplier of high quality communication systems worldwide. Our strengths are high quality products for the processing of analogue and digital signals of all transmission paths whether terrestrial, satellite or by cable networks. Our success Innovative concepts and modern, flexible production methods enable a wide range of standard products for industrial aswell as private installations and customer-specific solutions. Our success in efficient and professional technology has been acquired over the course of 40 years and this is reflected in the global competence the Polytron-Team is committed to. Strict quality control guarantees the reliability of our Made in Germany products. Strong sales agents With strong sales agents in all European countries, Asia, Russia, Australia, the Arabic countries and African states, Polytron has steadily increased its market presence. Our premium technology is the reason for many OEM partnerships within the branch, marketing Polytron products under ownbrand names. Service Polytron is there to serve you in the best possible way - from the first order through to installation and on-line help. If you need more information, leaflets, installation or service advice you can use the download possibilities at or contact us directly as below. Your contact persons for technical question and orders: Order Hotline: Inland: +49 (0) / Export: +49 (0) / Mo - Fr from 8:00 until 16:00 hrs Technical Hotline: +49 (0) / Mo - Fr from 8:00 until 16:00 hrs

2

3 Amplifiers Chapter A Verstärker Amplifiers Broadband Systems Headend Technology Chapter B A Headend Technology B Multiswitches Splitters / Taps Chapter C Splitter/Taps Multi Switch C Filters Chapter D Filters D Combiners and Outlet Sockets Chapter E Combiners and Outlet Sockets E Accessories Chapter F Accessories F Technical Informations / Product Index Chapter T Technical informations T

4

5 Amplifiers Chapter A Amplifiers Broadband Systems A Index CATV-Amplifier Home distribution amplifiers A 2 A 3 Variable home distribution amplifiers A 4 A 8 High performance home distribution amplifiers. A 9 A 13 Line amplifiers A 14 A 15 Plug-in modules for HV-, CV- and SVV amplifiers A 16 - A 18 Terrestrial Amplifiers Multi band amplifiers A 19 Range amplifiers A 20 Amplifiers MKK system A 21 SAT-Amplifiers Super broadband amplifers A 22 A 24 Insertion amplifiers A 25 Inline amplifiers A 26 A 27 Power supplies A 28 A 29 Overview-Amplifier A 30 A 32

6 Amplifiers A2 AKLASSE CATV Local Distribution Amplifiers with passive return path For small and mid-sized distribution systems Passive return path Attenuator -10 ajdustable LED operating indicator Sturdy zinc die-cast housing F connectors Prepared for DIN-rail mounting (p. A 20) HA.../P30/P65 Outputs Frequency range Passive return-path Gain Variable attenuator Output level µv 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Noise figure Operating voltage Power consumption Dimensions (W x H x D) µv µv µv µv V W mm HA N/P30 HA N/P65 HA N/P30 HA N/P65 HA N/P30 HA N/P x (Pre equalization 6) ,0 4,5 140 x 70 x 36 0,72 A2

7 AKLASSE CATV Local Distribution Amplifiers with active return path Amplifiers For small and mid-sized distribution systems Active return path Attenuator -10 ajdustable LED operating indicator Sturdy zinc die-cast housing F connectors Prepared for DIN-rail mounting (p. A 20) A 3 HA.../A30/A65 OUT Outputs Frequency range Passive return path Gain return path Output level return path max. Gain Variable attenuator Output level 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Noise figure Operating voltage Power consumption Dimensions (W x H x D) HA N/A30 HA N/A65 HA N/A30 HA N/A65 HA N/A30 HA N/A µv 7 2 x (Pre equalization 6) µv µv µv µv V W 4,5 5,0 mm 140 x 70 x 36 0,72 A3

8 Amplifiers A4 AKLASSE HB-House Dstribution Amplifiers Variable return path For small and mid-sized distribution systems Plug in return path module Test point at in- and output Sturdy die-cast housing with excellent heat dissipation and screening Splash water protected IP 65 EMC according EN /A2 90 F-connectors Prepared for DIN-rail mounting (p. A 20) HB N The latest Polytron house amplifier series HB N and HB N is characterised by its flexible return path concept and the excellent gain flatness throughout the whole band. The amplifier is available with 20 and 30 gain and an output level of 115 µv. Depending on the application the return path can be configured to 30 or 65 using the correct plug in diplex filters. Fain and slope can be adjusted independently for up- and downstream. Frequency range Return path frequency Gain Variable attenuator Output level 60 IMA3 (DIN 45004B) 60 IMA2 (DIN 45004A1) Noise figure Input voltage Power consumption Dimensions (W x H x D) µv µv µv V W mm HB N HB N or / , x 96 x 55 1,065 A4

9 Return path modules for HB-Amplifiers Verstärker Amplifiers The new return path modules with attenuator and equalizer. The diplex filters are provided directly on the module. A 5 HBR 0/30, HBR 0/65 Passive return path modules HBR 20/30, HBR 20/65, HBR 30/65 Passive return path modules Return path modules passive Return path modules active HBR 0/30 HBR 0/65 HBR 20/30 HBR 20/65 HBR 30/ Frequency range Gain Attenuator 0-20 Equalizer 0-20 Max. output level µv 110 0,04 A5

10 Amplifiers CATV-Home-Distribution-Amplifiers with variable return path A6 The Home Distribution Amplifiers HA , HA , HA , HA , HA and HA are specially designed for application in MDUs and larger distribution systems. Due to a choice of active and passive return path modules the amplifiers bi-directional signal transport for interactive applications (e. g. internet). The new housing concept meets the IP65 standard. The well dimensioned switch mode power supply warrants ample lifetime. Operation is shown by the power on LED. A multitude of dials provide any state of alignment. ➌ Plug-in Attenuator Interstage Pad. VSP... Poti: VSP... ➍ Plug-in Equalizer Interstage Pad. VSP... Poti: VSP... ➋ Plug-in Equalizer Input Pad. VSP... Poti: VSP... ➊ Plug-in Attenuator Input Pad. VSP... Poti: VSP... ➎ ➋ ➌ ➍ Plug-in return path Return path module active: RPM 0/30 RPM 0/65 Return path module passive: RPM 20/30 RPM 20/65 RPM 30/30 RPM 30/65 ➊ ➎ A6

11 AKLASSE CATV-Home-Distribution-Amplifiers Flexible return path concept 30 / 65 by plug-in modules Output level up to 125 µv Gain up to 45 HA with 2 outputs Compact Aluminium housing IP 65 Prepared for DIN-rail mounting (p. A 20) Verstärker Amplifiers A 7 Frequency range Return path Gain Noise figure Variable attenuator Variable equalizer Output level 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Input voltage Power consumption Current transit Dimensions (W x H x D) µv µv µv µv V W A mm HA N HA F HA N HA F HA N HA 36121F plug-in 30 / ,5 6 6, ,5 242 x 103 x 60 1,35 HA N HA F HA N HA F HA N HA F Frequency range Return path plug-in 30 / 65 Gain Noise figure 6 Variable attenuator 0-20 Variable equalizer 0-20 Output level IMR 3 (DIN 45004B) µv IMR 2 (DIN 45004A1) µv CTBA µv CSO µv 109 Input voltage V Power consumption W 8 Current transit A 2,5 2,5 2,5 Dimensions (W x H x D) mm 242 x 103 x 60 1,35 A7

12 Amplifiers Return Path Modules The new return path modules with setpoint bridges for attenution and equalization. The diplex filters are provided directly on the module. A8 HA-RPM 0/30, HA-RPM 0/65 Passive return path module (optional) HA-RPM 20/30, HA-RPM 20/65 HA-RPM 30/65 Active return path module (optional) Return path modules passive Return path modules active HA-RPM 0/30 HA-RPM 0/65 HA-RPM 20/30 HA-RPM 20/65 HA-RPM 30/30 HA-RPM 30/ Frequency range Gain Attenuator 1 Plug-in place Equalizer 1 Plug-in place Max. output level µv 117 0,05 Setpoint-Bridge Plug-in potentiometer With the new Set-Point-Bridges it s possible to adjust an attenuation or equalization in 1 steps. The Set-Point-Bridges can be ordered individually or in 10 pieces pack or in a Service-Box. The Service-Box 1 consists of the types VSP-1/3/5/7/9/11/13/15/17/19-5 pieces per type - The Service-Box 2 consists of the types VSP-2/4/6/8/10/12/14/16/18/20-5 pieces per type - Attenuation 10 pieces VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP VSP 0-10 VSP 0-20 VSP-Service-Box 1 - Art. no VSP-1/3/5/7/9/11/13/15/17/19 VSP-Service-Box 2 - Art. no VSP-2/4/6/8/10/12/14/16/18/20 A8

13 AKLASSE House Distribution Racks for CATV Systems Easy installation due to Quick Lock Service friendly due to pre-connected input, output and test sockets Flexible due to large choice of amplifiers with plug in return path Even output levels on all connectors Pre configured and tested - less work at customer site Two sizes 400 x 400 x 200 mm / 600 x 400 x 200 mm Verstärker Amplifiers A 9 BVT-Racks with Multitaps BVT-4 BVT-6 BVT-8 BVT-10 BVT-12 BVT-14 BVT-16 BVT-18 BVT-20 BVT-22 BVT No. of Outputs Amplifier HB N HA N/AP Return path module* HBR 20/65 HA-RPM 20/65 Dimensions (W x H x D) mm 400 x 400 x x 400 x 200 9,8 9,76 9,88 10,56 9,78 10,66 10,76 14,22 14,24 14,34 14,54 BVT-Racks with Splitters BVT-4 VT BVT-6 VT BVT-8 VT BVT-10 VT BVT-12 VT BVT-14 VT BVT-16 VT BVT-18 VT BVT-20 VT BVT-22 VT BVT-24 VT No. of Outputs Amplifier HB N HA N/AP Return path module* HBR 20/65 HA-RPM 20/65 Dimensions (W x H x D) mm 400 x 400 x x 400 x 200 9,8 9,76 9,88 10,56 9,78 10,66 10,76 14,22 14,24 14,34 14,54 * Other ampl. / return path modules on request A9

14 Amplifiers Userfriendly due to unique Quick Lock A10 Auf open Flexible in application due to a broad choise of amplifiers (HA- + HB-series) with plug-in return path locked Zu Service friendly Input, test sockets and output connectors are pre-connected on the angled mounting plate A10

15 HV CATV Distribution Amplifiers ➍ Return path modules Active: VMR 12, VMR 24 Passive: VMR 0 ➎ Interstage modules Attenuator: VMD... Fixed equalizer: VM... Variable equalizer: VM... R... AGC-module: VMC 05 Verstärker Amplifiers A 11 Gain switch ➌ ➋ ➊ Plug-in modules Attenuator: VMD... Fixed equalizer: VM... Variable equalizer: VM... R... AGC-module: VMC 05 Attenuator Return path filter for 30 / 55 / 65 VMF... ➊ Return path filter for 30 / 55 / 65 VMF... Input testpoint Power transit 2 fuses to control the power transit from input to output. ➏ Modules Output 1and 2 Splitter: VMV 4 Tap: VMA... Testpoint: VMM 20 ➌ ➎ ➋ ➊ ➍ ➊ ➏ A11

16 Amplifiers A12 AKLASSE HV-Distribution Amplifiers For middle and large sized distribution systems Active or passive return path up to 30, 55 or 65 configurable HV in GaAs technology Amplification switchable between 28 or 36 Interstage module slot Bi-directional test socket for measurement of input signal without interruption of operation 2nd output with distribution, tap-off module or as test output ( 20 ) configurable Configuration of transit line (HV... F) separated for input and output and settable via fuses With AGC-Module VMC 05, application as AGC-Amplifier possible (look page A 16) Frequency range Return channel Gain Noise figure Variable attenuator Flatness Equalization / plug-in place Ouput level 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Return loss Final stage Operating voltage Power consumption Transit current Dimensions (W x H x D) µv µv µv µv V W A mm HV N HV F HV N HV F HV N HV N HV F plug-in 30 / , ± 0, Push Pull Power Doubling ( 1,5 / Oktave) ,5 2,5 2,5 242 x 163 x 60 2, GaAS-FET A12

17 AKLASSE HV-Distribution Amplifiers For middle and large sized distribution systems Active or passive return path up to 30, 65 HV in GaAs technology Amplification switchable between 31 or 39 Integrated equalizer and attenuator Bi-directional test socket for measurement of input signal without interruption of operation Configuration of transit line (HV... F) separated for input and output and settable via fuses Verstärker Amplifiers A 13 Frequency range Return path channel Gain Flatness Variable attenuator Noise figure Equalizer Ouput level 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Return loss Final stage Operating voltage Power consumption Current transit Dimensions (W x H x D) µv µv µv µv V W A mm HV N HV F * ± 0, ( 1,5 / Oktave) GaAS-FET ,5 242 x 163 x 60 2,36 * 30 Return path available on request A13

18 Amplifiers A14 Amplifiers with variable Return path ➍ ➋ ➌ Return path modules Active: VMR 12, VMR 24 Passive: VMR 0 Variable attenuator Equalizer modules Fixed equalizer: VM... Variable equalizer: VM... R... AGC module VMC 05 ➎ ➑ Interstage modules Variable attenuator: VMD... Fixed equalizer: VM... Variable equalizer: VM... R... AGC module VMC 05 Return path equalizer Fixed equalizer: VMR... Variable equalizer: VMR... R... ➊ Return path filter for 30 / 55 / 65 VMF... ➊ Return path filter for 30 / 55 / 65 VMF... ➐ Modules for line-out port Splitter: VMV 4 Tap: VMA... Input test socket Remote power 4 plug-in security to determine the power passing ports ➏ Output modules 1 and 2 Splitter: VMV 4 Tap: VMA... Test port: VMM 20 Output test socket ➌ ➎ ➋ ➊ ➐ ➍ ➏ ➊ A14

19 AKLASSE CV Trunk-line Distribution Network Amplifiers Active or passive return path up to 30, 55 or 65 configurable CV in GaAs technology Interstage module slot Test sockets at input and output for measurements without interruption of operation 2nd output can be configured to tap-off or distribution output Transit current separately configurable for inputs and outputs via fuses Connections: PG 11 Safety class IP 66 Verstärker Amplifiers A 15 With AGC-Module VMC 05, application as AGC-Amplifier possible (look page A 16) Frequency range Return path channel Gain Noise figure Variable attenuator Flatness Equalization/plug-in place Output level 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CTBA 60 CSO Return loss Final stage Input voltage Power consumption Current transit Dimensions (W x H x D) µv µv µv µv V W A mm CV N CV F CV N CV F CV N CV F CV N CV F plug-in 30 / ,5 6,5 7,5 6,5-20 ± 0, Power Doubling ( 1,5 / Oktave) x 163 x 90 3, GaAS-FET A15

20 Amplifiers AGC-module VMC 05 for HV- / CV-Amplifier A16 For regulation of level deviation in CATV-Systems Pilot tone not necessary The AGC module VMC 05 uses the sum level of the CATV- System for regulation of the adjusted level. Pilot tone generator is not necessary. Applicable in all CV and HV-amplifiers (available since January 2002) For levelling the AGC module the setting device VMC-Eisrequired After calibartion the VMC-E will be removed and can be used for the next amplifierer. VMC 05 VMC-E Frequency range Basic attenuation 2 7 Return loss 20 Regulation range + / - 5 0,026 0,012 Service Module VMS 1 For return path measurements for using in the plug-in place of the diplexer. One socket for the measurements of the return path level on the amplifier output (- 20 ) and the second socket to measure the return Path level in direction headend station. During the measurement the forward path is in operating. The return path is cuted PG11 Accessories PGC - I PGC - F PGD-7 Chassis socket / IEC Chassis socket / F PG11 Through line Frequency range Max. Current transit A Connectors PG11 PG11 PG11 IEC M 14/1 F socket Ø 1,0 / 4,8 / 6,8 mm Sales packing pieces 1 0,034 A16

21 Plug-in Modules For Configuration of Amplifier Series HV, CV und SVV Flexible configuration on site Plug-in modules for all HV, CV and SVV amplifiers allow an optimal adaption to the respective requirements on site. Amplification and equalization in the forward and return path, active or passive return path, second output or external test socket are configurable. The plug-in modules are fully protected, thus they can not be misaligned or harmed. The high-quality connectors enable a perfect and sturdy high frequency connection to the PCB. Two leading pins make the plugging in of the module easier and ensure a correct positioning. Return path filters The return path filters separate the forward and return path. Thus a separate return path module is needed both at the input and at the output of the amplifier. Three different versions are available for an upper frequency range up to 30 or 65. The respective lower frequency ranges of the forward path are 47 and 86. Return path filters VMF 3 VMF Frequency range Through loss 0,5 0,015 Verstärker Amplifiers A 17 Return path modules Several modules for realization of a passive and two modules for an active return path are available. The amplification resp. attenuation can be adjusted with a built-in variable attenuator up to 10. Return path modules passive / active With equalizer VMR 0 VMR 12 VMR 24 VMR 12 E VMR 24 E Gain (-10) Equalization 0-10 Output level µv 113 0,014 Variable return path equalizers VMR 3 R -12 VMR 6 R Frequency range Equalization 0-10 Basic attenuation - 1 0,011 A17

22 Amplifiers A18 Output modules A splitter and several taps are available for the configuration of the outputs (line out, ouput 1, output 2): VMM 20: one operating output, one test socket The test socket delivers a signal attenuated by 20. Thus the amplifier output can be measured without opening or interrupting operation. VMV 4: two equal operating outputs The signal level is identical at both outputs and reduced by 4 in comparison to the version with only one output. This configuration is especially suitable for splitting the main signal between two lines of the same hierarchy level. VMA 7, VMA 14: one operating output with high level, one operating output with reduced level. The tap modules reduce the level of the second output by 7 resp. 14. This configuration is especially suitable for splitting the main signal between two lines with different hierarchy levels. Output modules VMV 4 VMA 7 VMA 14 VMM Version Splitter Tap Tap Testsocket Output ,5 Output ,01 Output modules with testpoint VMV 4 M VMA 7 M VMA 14 M Version Splitter Tap Tap Output Output ,015 Attenuators VMD 10 VMD Frequency range Attenuation ,011 Attenuators The variable attenuator reduces the amplification and thus also the output level, up to 10 resp. 20 depending on amplifier type. Variable equalizers VM 4 R -10 VM 4 R -20 VM 6 R -10 VM 6 R -20 VM 8 R -10 VM 8 R Frequency range Equalization Basic attenuation - 1 0,011 Fixed equalizers VM 4-6 VM 4-12 VM 6-6 VM 6-12 VM 8-3 VM 8-6 VM 8-9 VM 8-12 Article no Frequency range Equalization Basic attenuation - 1 0,009 A18

23 AKLASSE Multi-band Amplifier / DVB-T Frequency band selective inputs Variable attenuators on each input Low noise input for DVB-T Alu die-cast housing F-Connectors Prepared for DIN-rail mounting (p. A 20) Verstärker Amplifiers A 19 PAS 152/ 551 N / DVB-T The multi-band amplifier allows the combination of several receiving antennas as well as the amplification and balancing up of the signal level. The amplifiers have a separate input for band I, FM and band III as well as one UHF-input and one UHF-input with a lower noise figure especially for DVB-T signals. The amplifier PAS 152/551N is equipped with a separate amplifier module for VHF and UHF, this allows a higher amplification and output level. Inputs Band Frequency range Gain Variable attenuator Output level Noise figure Input voltage Power consumption Dimensions (W x H x D) µv V~ W mm PAS 152/ 551 N / DVB-T PAS N Bd. I Bd. II Bd. III Bd. IV/V DVB-T Bd. I/II Bd. III Bd. IV/V Bd. IV/V VHF I FM VHF III UHF UHF VHF I/FM VHF III UHF UHF , , ,5 242 x 103 x x 96 x 55 1,35 1,075 A19

24 Amplifiers A20 UHF-Amplifier For outdoor-mounting Weather-proofed plastic-housing Very low noise figure Remote power supply via coaxial cable or direct by connector Easy mast-mounting with brackets Input / Frequency range Gain Output level (60 KMA) Noise figure Input voltage Dimensions (W x H x D) µv V=/mA mm P 145 / 211 U ,5 15 / x 93 x 36 0,12 DIN-rail mounting for all types of HA- and HB-amplifiers for all types of SEV, SUV and PAS-amplifiers Shipment:: 2 pieces clamps and screws each : A20

25 MKK-System MKK-Channel Filters Two-section channel filters or IF-filters with high selectivity With support for several MKK-module units Low through loss MKK-filter: VHF 2,0, UHF 3,0 Precise alignment in factory Verstärker Amplifiers A 21 MKK 1-1 K MKK 1-2 K MKK 2-2 K MKK 1-3 K MKK 2-3 K MKK 3-3 K MKK 1-4 K MKK 2-4 K MKK 3-4 K MKK 4-4 K Inputs channel Dimensions mm 63 x 52 x x 52 x 170 0,663 0,69 Pre- and Post-Amplifiers For direct mounting on MKK filters Very low noise figure Power on LED Sturdy die cast housing High EMC protection These gain blocks are low noise wide band amplifiers. In combination with MKK filters they represent a highly selective channel amplifier system with strong output power levels. The advantage is the replacement of the gain block without retuning of the channel, an unbeatable advantage when it comes to service and stock keeping. MKK-Amplifiers 862 Equalizier Gain Output level 60 Operating voltage Connectors Dimensions (W x H x D) µv V mm MKK 2406 MKK MKK MKK MKK 1836 U MKK 1839 U MKK 4027RV MKK 58 x 45 x x 93 x x 115 x x 93 x 20 0,112 2,85 0,49 0,47 A21

26 Amplifiers SVV Superbroadband Amplifiers universal application A22 SAT-IF-distribution as an extension to CATV distribution networks The program and service offered in broadband cable networks is in many cases no longer sufficient today. Even extended networks may often not satisfy subscriber demands fully, since program availabitlity exceeds transmission possiblities by far. The solution is the insertion of additional satellite programs and services. These are received in a local head-end station and distributed without conversion of modulation to community systems or clusters which include several buildings or community estates. Beside AM and QAM signals up to 862 from wide area CATV networks and from SAT head-ends with modulation conversion, FM and QPSK signals are inserted and distributed in SAT-IF bands or in local clusters. Inputs for flexible configuration At the amplifier input the signals of the CATV and SAT-IF frequency ranges are either fed-in on a single or separate cable. Two different modules allow the required setup of the inputs. (Factory configuration VMB-U: Jumper-bridge, input 1: , input 2: not active). Input modules for SVV-Amplifiers VMB-B VMB-U Input Input ,011 A22

27 Superbroadband Amplifiers For amplification of CATV and SAT-IF signals For line and distribution networks up to 2400 Configuration on site for forward as well as return path with plug-in modules Return path with frequency edge of 30, 55 or 65, available as active or passive versions Minimal noise figure through equalization and attenuation after pre-amplifier stage Test ports for input and output signals Power supply exchangeable on site and switch over from local to remote voltage feeding LED operating indication Aluminum die-cast housing with excellent heat dissipation (IP 66) PG11 for different connector standards Verstärker Amplifiers A 23 The professional amplifiers of the SVV series incorporate an extension of the CV network amplifier series and include all advantages of this concept. They are equipped with an amplifier block for the range up to 862 and from 950 to Hybrid stages (power doubling) are used within the range up to 862 ; depending on version the amplification is between 25 and 34. The configuration of the amplifiers is done through using the same modules as implimented by the CV amplifiers (p. A 16 - A 18). Frequency range Return path channel Gain Noise figure Variable attenuator Flatness Equalization / plug-in place 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CSO 35 IMR 3 /2150 Return loss Final stage Input voltage Power consumption Current transit Connectors Dimensions (W x H x D) µv µv µv V W A mm SVV N SVV F plug-in 30 / 65 TER. 36 / SAT 37 TER. 8 / SAT 9 TER / SAT 0-20 TER. ± 0,5 / SAT ± 2 TER. 2 plug-in Slots / SAT ( 1,5 / Octave) GaAS-FET x PG x 163 x 90 3,14 A23

28 Amplifiers A24 Superbroadband Amplifiers For amplification of CATV and SAT-IF signals For line and distribution networks up to 2400 Minimal noise figure through equalization and attenuation after pre-amplifier stage LED operating indication Aluminum die-cast housing with excellent heat dissipation (IP 66) PG11 for different connector standards The professional amplifiers of the SVV series incorporate an extension of the CV network amplifier series and include all advantages of this concept. They are equipped with an amplifier block for the range up to 862 and from 950 to The configuration of the amplifier is done through using the same modules as implimented by the CV amplifiers (p. A 16 - A 18). Frequency range Return path channel Gain Noise figure Variable attenuator Flatness Equalization / plug-in place 60 IMR 3 (DIN 45004B) 60 IMR 2 (DIN 45004A1) 60 CSO 35 IMR 3 /2150 Return loss Final stage Input voltage Power consumption Current transit Connectors Dimensions (W x H x D) µv µv µv V W A mm SVV 36119N SVV F plug-in / 65 TER. 34 / SAT 40 TER. 7 / SAT 8,5 TER / SAT 0-20 TER. ± 1 / SAT ± 1,5 TER / SAT ( 1,5 / Octave) Push Pull ,5 2 x F 242 x 163 x 60 2,42 A24

29 SAT-Insertion Amplifier For combination of SAT-IF and terrestrial signals Remote feeding of LNBs via SAT-IF input Remote feed voltage 0/13,5/18 V Aluminium die-cast housing IP 65 Prepared for DIN-rail mounting (p. A 20) Verstärker Amplifiers A 25 SEV N/13-18 V Frequency range Gain Variabe attenuator 0-20 Equalizer 0-20 Output level µv 120 Noise figure 9 Remote feeding voltage V/mA 0/13,5/18 max. 250 Input voltage V~/W / 6,5-12 Dimensions (W x H x D) mm 242 x 103 x 60 1,35 Post Amplifiers with Power Supply Split-band amplifier, both ranges (TER/SAT) individually setable with variable attenuator Several remote feeding options selectable via jumper straps: Remote feeding via input or output, as well as DC-control Voltage transit Aluminium die-cast housing IP 65 Prepared for DIN-rail mounting (p. A 20) SUV N/P 30 SUV N/P Frequency range return path Frequency range Gain Variable attenuator 0-10/8 Fix 0-10/0-10 Output level 35 IMA 3 µv 116 (60 ) 116 Noise figure 8 9 Current transit Remote feeding voltage Operating voltage Dimensions (W x H x D) V=/mA V=/mA V /W mm max. 18 / (max. 250) 230 / max. 16,5 242 x 103 x 60 1,35 A25

30 Amplifiers A26 SAT-IF Amplifiers, remote feeded DC-Bypass Transit of superimposed control signal (22 khz) F connectors SV 148/211 f SV 152/311 f SV 232 SV 148 / 211 f SV 152 / 311 f SV Frequency range Gain Output level 35 IMA 3 µv IMA 2 µv Noise figure 5 Supply-/Operating voltage V=/A (max. 1) (0,5) Power consumption ma ,14 0,17 0,057 Basic units For mounting of 2 MKK-filters (max. 7 channels) Cascadeable over through-line outputs Operating voltage of MKK-modules via 25 cm cable with 4mm Banana plug Stabilized output voltage Short-circuit proof Thermal overload protection Double safety isolated Over-voltage protection Filter support MKK 022-2,0 VV MKK 022-2,0 UU No. of filter supports 2 x VHF 2 x UHF Frequency range Attenuation 4 5 Input voltage V~/Hz 230 / 50/60 Output voltage V= 15 Output current ma 2000 Power consumption W 30 No. of outputs 2 Connectors plug / socket IEC M 14 / 1 2,26 A26

31 Power Supplies 15 V DC for remote feeding For indoor installation With built-in DC-inserter Stabilised output voltage 15 V DC Short-circuit proof Thermal overload protection Double safety isolated Verstärker Amplifiers A 27 Frequency range Through loss Input voltage Output voltage Output current Power consumption No. of outputs Outputs Hz V= ma W P 150/ V AC / 50/ ,51 Power Supplies 15 V DC for remote feeding Suitable for mast mounting of all P-housings Complete set with holder and screws Version Sales packing pieces MS - MM plastic 3 0,001 Sheath Current-filter Galvanic isolating unit Against interference (e.g. hum voltages) over sheath Break-through voltage max. 50 V Application Frequency range Through loss MSF-TV for Radio and TV ,024 A27

32 Amplifiers A28 Power Supplies for remote feeded For internal installation Thermal over-load protection Double safety isolation K50W40 with primary protection fuse and reversible electronic secondary protection circuit K50W40 with 4 selectable voltage ranges Frequency range Through loss Output voltage Output current Operating voltage Power consumption Connectors / Output Dimensions (W x H x D) V~ A V~ W mm K50W ,75 4,0 3,45 3, clamp terminal and PG7 cable gland 170 x 160 x 75 5,65 AC/DC inserters For the combination or separation of RF and operating voltages by remote feeding via cable RGW 75 BKW 8 BU RGW 75 BKW 8 BU Frequency range Through loss 0,5 0,8 Load max. V= ~ /A 30 / 1 50 / 8 Return loss Hum modulation ratio 70 Voltage connector 4 mm Banana socket clamp connection and PG7 cable gland Dimensions (W x H x D) mm 57 x 16 x x 64 x 36 0,055 0,326 A28

33 High efficiency switch mode Power Supplies PSAC For indoor installation High efficiency of 85% Thermal overload protection: If temperature rises to high, the switching transistor will be blocked Current limiting: If the maximum permitted current is exceeded, the output voltage is automatically reduced Over-voltage protection: If inadmissable high voltages or voltage peaks rise, the switching transistor will be blocked Verstärker Amplifiers A 29 Operating voltage Output voltage Output current max. Connectors Dimensions (W x H x D) PSAC 75/ PSAC 150/ V V= A mm x 95 x 40 0, clamp terminal 210 x 100 x 50 0,940 PSAC 240/ x 95 x 65 1,2 A29

34 Amplifiers Overall Surrey Amplifiers A30 Distribution-Amplifier HA and HB amplifiers are typically used after the house connecting point or as post amplifier for MATV headend systems. Return path Attenuator Equalizer Gain Output level 60 /862 Operating/V Current transit Connectors Freq./ Act./Pas. Fix IMA 3 CTB CSO V A HA N/P P X F HA N/P P X F HA N/A A X F HA N/A A X F HA N/P P X F HA N/P P X F HA N/A A X F HA N/A A X F HA N/P P X F F HA N/P P X F F HA N/A A X F F HA N/A A X F F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HA N/AP / 65* A / P X X F HA F/AP / 65* A / P X X ,5 F HB N / 65* A / P X X F HB N / 65* A / P X X F * Plug in return path modules A30

35 Total Summary Amplifiers Verstärker Amplifiers Broadband Amplifiers HV amplifiers are designed for signal distribution in MATV and CATV in house distributions. These units are highly flexible due to a multitude of plug in modules. A 31 Articel no. Return path Attenuator Equalizer Gain Output level 60 /862 Operating Current transit Connectors Freq./ Act./Pas. Fix IMA 3 CTB CSO V A HV N / 65 A / P X X 28/ F HV F / 65 A / P X X 28/ ,5 F HV N / 65 A / P X X 28/ PG 11 HV F / 65 A / P X X 28/ ,5 PG 11 HV N / 65 A / P X X PG 11 HV N A / P X X 32/ PG 11 HV F A / P X X 32/ ,5 PG 11 HV N / 65 A / P X X 32/ PG 11 HV F / 65 A / P X X 32/ ,5 PG 11 Line-Amplifiers CV amplifiers are CATV line extenders with GaAs Power doubling hybrids. These units are highly flexible due to a multitude of plug in modules. Return path Attenuator Equalizer Gain Output level 60 /862 Operating Current transit Connectors Freq./ Act./Pas. Fix IMA 3 CTB CSO V A CV N /65 A / P 20 M PG 11 CV F /65 A / P 20 M PG 11 CV N /65 A / P 20 M PG 11 CV F /65 A / P 20 M PG 11 CV N /65 A / P 20 M PG 11 CV F /65 A / P 20 M PG 11 CV N /65 A / P 20 M PG 11 CV F /65 A / P 20 M PG 11 Super Broadband Amplifiers These Super broadband amplifiers provide gain in the CATV and SAT IF frequency range. They are used in combined SAT and CATV distribution systems. Return path Attenuator Equalizer Gain Output level 60 /862 Operating Current Freq./ Act./Pas. Fix IMA 3 CTB CSO V transit Connectors SVV N /65 A / P 20 M PG 11 SVV F /65 A / P 20 M PG 11 SVV N /65 A / P 20 M PG 11 SVV F /65 A / P 20 M PG 11 A31

36 Amplifiers Overall Surrey Amplifiers A32 SAT-Amplifiers For amplification of SAT IF in larger distribution systems. Attenuator Equalizer Gain/ Output level 35 (µv) Operating Current Freq./ IMA 3 V transit Connectors SV 148/211 f F SV 152/311 f F SEV N F SUV N-FC ,5 F MKK-Amplifiers These amplifiers are to be used exclusively with the MKK filter system. Attenuator Gain Output level 60 (µv) Operating/V Connectors IMA 3 MKK MKK MKK MKK MKK MKK MKK MKK MKK 1836 U MKK MKK 1839 U MKK MKK 4027 RV MKK Terrestrial Amplifiers For amplification and combination of terrestrial antenna signals. These amplifiers have several independent inputs. Attenuator Gain Output level 60 (µv) Operating/V Connectors IMA 3 PAS 152/551 N-FC x F PAS N x F PAS 145/45 K IEC P 145/211 U Klemm A32