MMS / MMT / MMCX / MML series R209 / R210 / R110 / R302

Transcription

1 2 MM / MMT / MMCX / MML series R209 / R210 / R110 / R302

2

3 CONTENT Pages MM/MMT Introduction to 2-5 Characteristics to 2-7 Plugs Cable assemblies Receptacles Accessories and adapters to 2-11 Receptacle packaging Assembly instructions MM/MMT/MMCX/MML MMCX Introduction Interface Characteristics Plugs Receptacles to 2-17 receptacle packaging and panel drilling Assembly instructions MML Introduction Characteristics Receptacles Pigtails Cable assemblies to 2-22 Adapters Tools

4 MM/MMT INTROUCTION MM MMT Ω C - 6 GHz C - 8 GHz 75Ω C - 1 GHz GENERAL Low profile coaxial connectors urface-mount receptacle (MT) Fully compatible with automated pick and place machines nap-on mating High RF performance 360 cable rotation APPLICATION Wireless base stations atellite reception terminals (GP...) Instrumentation Wireless datacom networks Automated payment systems Videocommunications Other general electronics 2-4

5 INTROUCTION RAIALL has designed a complete range of microminiature coaxial connectors, dedicated to urface Technology (MT). Better than a simple MT version of standard connector, MM and MMT series were the first coaxial designed for MT applications. ue to its optimized design, MM and MMT range benefit from the following advantages: MM/MMT esign adapted to automatic placement The assymetric footprint of the MM and MMT connectors allows video micro-positionning using the shadow to analyse its placement. MM and MMT connectors stand on three pliable legs. This design guarantees the receptacle stability placement. It allows it to absorb by elastic bending of the legs, the pressure of the positioning mechanism. A geometry suited to automated picking The plain upper surface of MM and MMT receptacle facilitates vacuum picking of the component automated distribution system. The geometry allows the use of numerous pneumatic nozzles with various diameters. Optimization of soldering procedure MM and MMT connectors materials used resist, without damage, the rapid elevation of temperature during the short time of the solder reflow in an infra-red oven. Packaging The MM and MMT connectors are packaged on tape and reels containing either 100, 0 or The unit cavity geometry is designed for a perfect presentation of the component. The bottom of the cavity This hole facilitates the suction of the component, avoiding the adherance effect and allows the use of for a push rod. 360 cable rotation The MM and MMT snap-on mating system ensures a correct positive connection each time and all connectors (plugs + receptacles) have a design which allows a 360 rotation of the pair when mated. MM vs MMT MM and MMT connectors are dedicated to similar application. Nevertheless the choice between these to standard will be driven by the following characteristics: urability (mating cycle) Frequency range MM MMT Comment It is the main difference between these two series. 0 MM is dedicated to application wich requires only few mating/unmating cycles. MMT provide stronger retention force while allowing more manipulation. Ω C-6 GHz 75Ω C-1 GHz Ω C-8 GHz 75Ω C-1 GHz Mated height 5.2 mm 6.8 mm Both series are fully optimized for either wireless phone frequency range or mobile computing such as bluetooth, Wifi and Wimax. 2-5

6 MM CHARACTERITIC Test standard Values/remarks ELECTRICAL CHARACTERITIC Impedance Ω 75Ω Frequency range C - 6 GHz C - 1 GHz Typical V..W.R. (mated pair) IEC at 1 GHz 1.15 at 2.5 GHz 1.35 at 6 GHz Insertion loss IEC db at 2 GHz RF leakage (mated pair) MIL T 1344 method db at 0 MHz -45 db at 1 GHz -40 db at 2 GHz Outer contact resistance NF C 930 (I = 40 ma peak) 5 MΩ max Center contact resistance NF C 930 (I = 40 ma peak) 15 MΩ max Insulation resistance IEC MΩ min (under 2 V RM) Working voltage V RM Testing voltage (V RM) IEC Ø 1 mm: 2 ; Ø 2 mm: 0 Maximum admissible power 40 W at 1 GHz / 20 C / V..W.R. = 1 MECHANICAL CHARACTERITIC urability IEC matings Force to engage IEC N avg Force to disengage IEC N avg hocks (drop test) IEC g/11 ms ; 3 shocks/axis/way Random vibrations General Motors spec. ine waves 5 to 1000 Hz 3 to 30g - 1 H/axis Bumps (mechanical shocks) IEC g/6 ms 1000 bumps/axis/way Cable retention force IEC Ø 1 mm: 20 N ; Ø 2 mm: 35 N olderability IEC Passed ENVIRONMENTAL CHARACTERITIC Temperature range -40 C/+90 C Climatic cycles GAM T H at 70 C - 24 H at 40 C/93% -36 H at -25 C MATERIAL Bodies plugs/in-series adapters Bodies receptacles Center contact male female Insulator PLATING Bodies plugs/in series adapters Bodies receptacles Center contact male female ie cast zinc/brass Phosphor bronze Brass Beryllium copper PTFE Nickel Gold Nickel Gold RF leakage and v.s.w.r 2-6

7 CHARACTERITIC MMT Test standard Values/remarks ELECTRICAL CHARACTERITIC Impedance Ω 75Ω Frequency range C - 8 GHz C - 1 GHz Typical V..W.R. (mated pair) IEC at 1 GHz 1.10 at 2.5 GHz 1.15 at 6 GHz Insertion loss IEC F (GHz) RF leakage (mated pair) IEC db at 0 MHz -38 db at 1 GHz -30 db at 3 GHz Outer contact resistance IEC (I=40 ma eff.) Initial: 2.5 mω max Final: 12.5 mω max Center contact resistance IEC (I=40 ma eff.) Initial: 5 mω max Final: 15 mω max Insulation resistance IEC MΩ under 0 Vcc Working voltage 170 V eff. Testing voltage IEC V eff. Maximum admissible power 23 W at 1.8 GHz / 40 C / V..W.R. = 1.1 MECHANICAL CHARACTERITIC urability IEC matings Force to engage/disengage IEC Ins 18 N Ext > 7 N hocks IEC passed Vibrations IEC passed Bumps IEC passed Cable retention force IEC Ø 2 mm: 20 N ; Ø 2.6 mm: 60 N olderability IEC Passed ENVIRONMENTAL CHARACTERITIC Temperature range 55 C / 100 C amp heat IEC Passed Thermal shocks IEC / Test NA Passed MATERIAL Plugs body/in-series adaptor Receptacles body Plugs center contact Receptacles center contact Insulators PLATING Bodies plugs/in series adapters Bodies receptacles Plugs center contact Receptacles center contact Brass Cun9p Cube2 Brass PTFE Nickel/BBR Gold Gold Gold RF leakage and v.s.w.r All dimensions are given in mm. 2-7

8 MM/MMT PLUG AN PIGTAIL TRAIGHT PLUG CRIMP TYPE FOR FLEXIBLE CABLE Fig. 1 Fig. 2 eries Cable group Cable group imensions (mm) Captive center Part number Fig. Imp. (Ω) dia. A B C contact Finish MM RG178/RG196 2// R yes nickel MMT RG174/RG // R yes nickel RIGHT ANGLE PLUG CRIMP TYPE FOR FLEXIBLE CABLE Fig. 1 Fig. 2 eries MM MMT Cable group imensions (mm) Cable group Part number Fig. Imp. (Ω) dia. A B C 1// R RG178/RG196 2// R RG178/RG196 2// R RG174/RG // R Captive center contact yes yes Finish nickel nickel PIGTAIL Fig. 1 Fig.2 eries Cable group Cable group dia. Part number Fig. Composition MM 1// R R C RG178/RG196 2// R R C MMT RG178/RG196 2// R R C RG174/RG // R R C To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

9 Cable AEMBLIE Fig. 1 CABLE AEMBLIE and RECEPTACLE MM/MMT Fig. 2 eries Cable group Cable group dia. Part number Fig. Composition 1// R R C R MM RG178/RG196 2// R R C R MMT RG178/RG196 2// R R C R Custom cable assemblies Contact us for all your cable assembly needs. MT RECEPTACLE Fig. 1 Fig. 2 eries Part number Fig. Imp. (Ω) Center contact finish Finish Packaging Reel dia. Assembly instructions R reel 100 pieces 180 MM R reel 0 pieces 180 R reel 3000 pieces 330 gold gold R reel 100 pieces 180 M01 MMT R reel 0 pieces 180 R reel 3000 pieces 330 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 2-9

10 MM/MMT TET BOAR AN AAPTER BETWEEN ERIE AAPTER Fig. 1 Fig. 2 eries Part number Fig. Type Finish MM R MM female/ma female passivated stainless steel MMT R MMT female/ma female BBR TET BOAR Fig. 1 Fig. 2 eries Part number Fig. MM R MMT R Connected to a network analyzer by 2 cable assemblies, this board allows to measure the V..W.R. of a complete link. IN ERIE AAPTER FOR PCB TO PCB LINK 3.3 Fig. 1 Fig. 2 Fig. 3 eries Part number Fig. imension A (mm) Finish Packaging R MM nickel 100 pieces R MMT R BBR 100 pieces 2-10 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

11 CABLE AEMBLIE AN TOOLING To ease PCB linking, this adapter is designed to remain mated to one designated PCB. Therefore, the slit interface is slide-on, the other is snap-on. This adapter can also be developed upon request with other lengths, in order to adjust space between PCB (minimum distance: 6.4 mm). Please consult us. MM/MMT MEAUREMENT CABLE AEMBLIE Fig. 1 Fig. 2 eries Cable group Cable group dia. Part number Fig. Composition Length L (mm) MM (1) RG178/RG196 2// R R C R MMT R // R R C R (1) Both cable assemblies are equiped with a straight MM plug with a sliding interface to allow 0 matings and a MA connector. EXTRACTION TOOL Materials and finish: black anodized aluminium The anodization allows the electric insulation and protects from the oxidization. eries Part number MM R MMT R To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 2-11

12 MM/MMT RECEPTACLE PACKAGING ACCORING TO IEC TANAR MATERIAL Reel: polyester Carrier tape: antistatic PETG (polyester) Cover tape: polyester Packaging ia. A 100 & PRECAUTION FOR UE Automated pick and place machines use standard tooling to peel the antistatic film off. ometimes the "a" dimension of this tool is shorter than the overall "b" width between the two legs of the receptacle. There is thus a risk for the two legs being deformed while they pass through the tool during the suction operation. The user must then widen the "a" dimension of the peeling tool. 2-12

13 M01 AEMBLY INTRUCTION VIEO HAOW AN OLERING PATTERN OF THE RECEPTACLE MM/MMT MM Coplanar circuit on PCB PCB material: glass epoxy composite (e r = 4.6) Ground and signal are on the same side. PCB thickness (mm) Coplanar line A (mm) Pattern Land for solder paste MMT UCTION PROCEURE FOR RECEPTACLE MM Ø OF NOZZLE > 1.2 mm uction with the central contact hole. MMT Ø OF NOZZLE < 1.2 mm uction with insulator. EXAMPLE OF PNEUMATIC NOZZLE 2-13

14 MMCX introduction Ω C - 6 GHz GENERAL ubminiature coaxial connectors Push-pull" snap-on mating Complies with specification CECC APPLICATION Wireless LANs PCMCIA cards RF test ports Base stations MMCX series from Radiall combine intermatability with CECC compliant suppliers and high manufacturing quality. MMCX series is especially dedicated to wire to PCB connection where low space above the PCB is available (less than 2.1 mm) ue to Radiall manufacturing quality standard, our MMCX provide positive tactile feedback. MMCX series are adapted to high volume applications and Pick & Place manufacturing process. INTERFACE PLUG JACK 2-14 Letter min. mm max. min. inch max A B C X Letter min. mm max. min. inch max A B C X X X

15 ELECTRICAL CHARACTERITIC CHARACTERITIC MMCX Impedance Ω Frequency range C - 6 GHz V..W.R. CECC Edge card MT: 1.40 max Cabled: 1.35 max ielectric withstanding voltage (at sea level) CECC V RM Hz Insulation resistance CECC MΩ min MECHANICAL CHARACTERITIC Engagement force CECC lbs max isengagement force CECC lbs to 3.4 lbs max Contact captivation CECC lbs min urability (mating) CECC cycles min ENVIRONMENTAL CHARACTERITIC Temperature range -55 C / +155 C Temperature shock CECC compliant Vibration CECC compliant MATERIAL and PLATING Test standard Values/remarks Materials PLatings Bodies Brass Gold Center contact male female Brass Beryllium copper Gold Insulator PTFE These characteristics are typical and may not apply to all connectors. MMCX CHARACTERITIC Eco MMCX ELECTRICAL AN MECHANICAL CHARACTERITIC Impedance Ω Frequency range C - 3 GHz Typical VWR 1.35 at 3 GHz Temperature range - 40 C / + 85 C Mating cycles 100 mating cycles MATERIAL and PLATING Materials PLatings Connector body Brass Gold Insulator PTFE / Polypropylene Female center contact Beryllium copper Gold Outer contact Brass PACKAGING Packaging / MOQ (1) (1) MOQ = Minimum Order Quantity 100 pieces bulk / MOQ 1000 pieces 0 pieces reel / MOQ 1000 pieces 10 pieces reel / MOQ 10 pieces Unit packaging / MOQ 100 pieces 2-15

16 MMCX PLUG AN RECEPTACLE TRAIGHT PLUG FULL CRIMP TYPE FOR FLEXIBLE CABLE imensions (mm) Cable group Cable group dia. Part number A B C RG178/RG196 2// R RG174/RG // R Packaging 100 RIGHT ANGLE PLUG Fig. 1 Fig. 2 Fig. 3 Cable group Cable group dia. Part number Fig. imensions (mm) A B Packaging Note RG " R RG178/RG196 2// R R110A ECO version RG174/RG // R R110A ECO version Fig. 4 PCB EGE CAR RECEPTACLE Fig. 1 Fig Part number Fig. Gende Assembly instructions Packaging Note R M04 MT 100 R Jack M05 MT/offset R110A M04 reel of 10 pieces ECO version To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

17 TRAIGHT PCB RECEPTACLE RECEPTACLE MMCX Part number Fig. Gender Panel drilling R Assembly instructions Packaging R110A P ECO version R Non magnetic Jack R MT R Fig. 1 Fig. 2 Fig. 3 Fig. 4 M02 reel of 0 pieces Note solder legs R110A ECO version RiGHT ANGLE FEMALE RECEPTACLE Part number Panel drilling Packaging R P02 0 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 2-17

18 MMCX RECEPTACLE PACKAGING ACCORING TO IEC TANAR MATERIAL Reel: polyester Carrier tape: antistatic PETG (polyester) Cover tape: polyester A VIEW PRECAUTION FOR UE Automated pick and place machines use standard tooling to peel the antistatic film off. ometimes the "a" dimension of this tool is shorter than the overall "b" width between the two legs of the receptacle. There is thus a risk for the two legs being deformed while they pass through the tool during the suction operation. The user must then widen the "a" dimension of the peeling tool. A VIEW Part number R Part number R Part number R R PANEL RILLING P01 P02 mm inch max. min. max. min. A B

19 M02 OLERING PATTERN AEMBLY INTRUCTION video shadows MMCX Part number R M03 OLERING PATTERN video shadows Part number R R110A M04 OLERING PATTERN video shadows Part number R R M05 OLERING PATTERN video shadows Part number R

20 MML INTROUCTION RAIALL has developed a new MML series to address the market demand for smaller microminiature coaxial connectors for applications such as cell relay, WiFi access points, GP and other mobile terminals. There are three types of plugs with mated heights of, H2.5, H2.0 and H1.5, as well as two types of vertical PCB receptacles with good electrical performance up to 6 GHz. FEATURE Two vertical PCB receptacles - MML H2.5 and MML H2.0 - MML H1.5 pace saving - Three mated heights 2.5 mm, 2.0 mm, 1.5 mm - PCB patterns 3.08 mm x 3 mm for H2.5 and H2.0, 2 mm x 2 mm for H1.5 C - 6GHz, typical VWR 1.35 max Cable assemblies are offered with three high performance cables: 1.33 mm for MML H2.5, 1.13 mm for MML H2.0, 0.81 mm for MML H1.5 MML H1.5 series PCB receptacle H1.5: R MML H2.0 series MML H2.5 series PCB receptacle H2.5 and 2.0: R APPLICATION Handhelds/GP/WLAN GM/CMA/WCMA/T-CMA cards CHARACTERITIC ELECTRICAL CHARACTERITIC Values/remarks Nominal impedance Ω Frequency range C - 6 GHz Typical VWR 1.35 max Contact resistance Center contact Outer contact 25 MΩ 15 MΩ Insulation resistance 0 MΩ min Voltage rating H2.5 and H2 H Vrms 1 Vrms Withstanding voltage H2.5 and H2 H Vrms 200 Vrms Mechanical durability 30 cycles Center contact axial force 0.15 N RoH Compliant Temperature range -40 / +90 C Humidity 96 hours at temperature of 40 C and humidity of 95% Corrosion (salt spray) 5% salt water solution, 48 hours MATERIAL and PLATING Materials PLatings Connector bodies Phosphor Bronze Gold Female center contact Phosphor Bronze Gold Male center contact Brass Gold 2-20

21 MT receptacles RECEPTACLE, pigtails and cable assemblies MML MML type Part number imensions (mm) A B C Packaging H2.5 & H2.0 R piece/reel H1.5 R piece/reel MML pigtails Fig. 1 Fig. 2 imensions (mm) Cable group dia. MML type Part number Fig. A B 1.33// H2.5 R // H2.0 R // H1.5 R MML to MML cable assemblies Packaging 100 Cable group dia. MML type Part number imensions (mm) A B 1.33// H2.5 R // H2.0 R // H1.5 R MML to sma plug cable assemblies Packaging 100 imensions (mm) Cable group dia. MML type Part number A B 1.33// H2.5 R // H2.0 R To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. Packaging

22 MML cable assemblies, adapters, tool and cable characteristics MML to sma bulkhead jack cable assemblies Cable group dia. MML type Part number imensions (mm) A B Packaging Note 1.33// H2.5 R // H2.5 R Panel sealed MA 1.13// H2.0 R adapters imensions (mm) MML type Part number Fig Packaging Note A B C R MML plug - MA plug H2.5 & H2.0 R MML jack - MA plug unit R MML plug - MA plug H1.5 R MML jack - MA plug extraction tools Fig. 1 Fig. 2 Part number To disconnect Packaging R H2.5 & H2.0 unit R H CABLE CHARACTERITIC (typical) Cable Impedance (Ω) 1.33// 1.13// 0.81// Cable imension mm (inch) Insertion Loss db/m (db/ft) Core type Core ia. Insulator ia. creen Outer 1 GHz 2 GHz 3 GHz 6 GHz 7*.102 (7*.004) 7*.08 (7*.003) 7*.05 (7*.002).305 (.012) PC.24 (.009) PC.15 (.006) PC.88 (.035) FEP.70 (.028) FEP.41 (.016) PFA 1.13 (.044) TPC.95 (.037) TPC.65 (.026) TPC 1.33 (.052) FEP 1.13 (.044) FEP.81 (.032) PFA 1.61 (0.49) 2.00 (0.61) 3.00 (0.91) 2.33 (0.71) 2.90 (0.88) 4.40 (1.34) 2.92 (0.89) 3.70 (1.13) 5. (1.68) 4.31 (1.31) 5.30 (1.62) 8.30 (2.53) PC = ilver Plated Copper TPC = Tin Plated Copper FEP = Fluorinated Ethylene Propylene PFA = Perfluoroalkoxy To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

23 Company Profile AUTOMOTIVE AEROspace Cable designation Cable Group /Ω Imp. Ω Core type Cable dimensions mm (inch) Core Insulator creen RG 174 A/U RG 178 B/U RG 178 B/U RG 178 non m. RG 179 B/U RG 187 A/U RG 188 A/U RG 196 A/U RG 212 /U RG 213 /U RG 214 /U RG 215 RG 216 /U RG 217 /U RG 218 /U RG 223 /U RG 225 /U RG 303 /U RG 316 /U R 316 RG 393 RG / 2 / 2 / 2 / 2.6 / / / 2 / 8 / 10 / 11 / 10 / 11 / / 22 / 5 / 11 / 5 / 2.6 / 2.6 / 10 / 5 / / x x x x x x x x x x x x x x x x x (.019) 0.30 (.012) 0.30 (.012) 0.29 (.011) 0.30 (.012) 0.30 (.012) 0.51 (.020) 0.30 (.012) 1.41 (.056) 2.26 (.089) 2.25 (.089) 2.25 (.089) 1.21 (.048) 2.69 (.106) 4.95 (.195) 0.89 (.035) 2.38 (.094) 0.94 (.037) 0.53 (.021) 0.53 (.021) 2.39 (.094) 0.98 (.039) R 179 BT 3002 BT / / 75 5 / x x (.012) 0.31 (.012) 0.60 (.024) 1.52 (.060) 0.84 (.033) 0.84 (.033) 0.84 (.033) 1.60 (.063) 1.60 (.063) 1.52 (.060) 0.86 (.034) 4.70 (.185) 7.24 (.285) 7.24 (.285) 7.25 (.285) 7.24 (.285) 9.40 (.370) (.680) 2.95 (.116) 7.24 (.285) 2.95 (.116) 1.52 (.060) 1.52 (.060) 7.24 (.285) 2.95 (.116) Outer 2.79 (.110) 1.78 (.070) 1.83 (.072) 1.80 (.071) 2.54 (.010) 2.79 (.110) 2.79 (.110) 2.03 (.080) 8.43 (.331) (.406) (.425) (.405) (.425) (.545) (.870) 5.38 (.212) (.429) 4.32 (.170) 2.49 (.098) 2.80 (.110) 9.91 (.390) 4.95 (.195) EFENE INUTRIAL INTRUMENTATION MEICAL PACE TELECOM Radiall cable if applicable P/N Remark C C C C C C C C na C C na C C C C C na C C C C PVC jacket FEP jacket PVC jacket non magnetic / FEP jacket FEP jacket PTFE jacket PTFE jacket PTFE jacket C C C LOH jacket FEP jacket FEP jacket s.a. PointVirgule imply Your Best Connection. Technical information and sales contacts are available at : The Best End-to-End Interconnect olutions PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket glass fiber jacket We offer an extensive range of solutions that supports the most demanding signal transmission applications. 4G wireless infrastructure, active array radars, IE s detection, electrical wiring in aircrafts, soldier tactical radios, in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex applications that we support. RF coaxial connectors Multipin rectangular connectors Fiber optic connectors and transceivers Rack and panel connectors Coaxial and fiber optic cable assemblies and harnesses Antennas for tactical networks, aerospace High frequency microwave components and instrumentation Coaxial switches, including the smallest and most reliable PT relay. FEP jacket FEP jacket FEP jacket FEP jacket Flexible cable BT approved 3.07 (.121) 3.55 (.140) 5.1 (.200) India - Radiall India Pvt. Ltd. emi rigid cables MIL-C-17 standard RG 401 /U RG 401 alu RG 402 /U RG 402 tin RG 402 silver RG 402 alu RG 402 non m. RG 405 /U RG 405 tin RG 405 alu RG 405 non m..047".047" tin.2".2".141".141".141".141".141".085".085".085".085".047".047" 1.63 (.064) 1.63 (.064) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.29 (.011) 0.29 (.011) Hand-formable Hand-formable Hand-formable Hand-formable.085".141".141".141" 0.51 (.020) 0.92 (.036) 0.92 (.036) 0.92 (.036) 5.31 (.209) 5.31 (.209) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 1.68 (.066) 1.68 (.066) 1.68 (.066) 1.68 (.066) 0.94 (.037) 0.94 (.037) (.2) 6.35 (.2) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 2.20 (.087) 2.20 (.087) 2.20 (.087) 2.20 (.087) 1.19 (.047) 1.19 (.047) C copper tubing C tinned alu tubing C copper tubing C tinned copper tubing C silvered copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing 2.21 (.087) 3. (.138) 4.05 (.159) 4. (.177) C C C C Best Value-added ervices 1C004XE November Edition 1.6 (.063) 1.95 (.077) 2.5 (.098) Collaboration: We work closely with your engineers to understand your business, your technical needs, and your budgetary issues; Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of standard products at an affordable cost; Custom Products: We can tailor products to specific equipment and application needs; Global Presence: We re everywhere you need us, with worldwide sales, engineering support, R& in North America, Europe, and Asia, and manufacturing facilities strategically located in the United tates, Mexico, France, India, and China; Responsive upport and ervice: From the design stage, planning to post-installation support, we re with you at every step, whether you need sales support or engineering expertise; On-time elivery: We support your logistical needs so you get the products when and where you need them; Warranty: We proudly stand behind our products. Hand-formable cable 1.63 (.064) 2.95 (.116) 2.98 (.117) 2.98 (.117) tin soaked braid tin soaked braid FEP jacket LZH jacket Certifications and Environmental Corrugated cables (with helical or ringed/annular copper tube) Flexible Flexible Flexible Flexible Flexible uper flexible uper flexible uper flexible uper flexible 1/4" 1/2" 7/8" 1 1/4" 1 5/8" 1/4" 3/8" 1/2" 7/8" Note: = single braid. = dual braid. tube 2.38 (.094) 4.80 (.189) 9.13 (.359) 12.7 (.0) 17.3 (.681) 1.90 (.075) 2.60 (.102) 3.60 (.142) 9.04 (.356) 6.40 (.252) 11.6 (.457) 22.5 (.866) 32.5 (1.28) 43.5 (1.71) 4.70 (.185) 6.30 (.248) 8.70 (.343) (.930) (.343) (.644) 27.7 (1.091) 39.5 (1.55).5 (1.99) 7.40 (.291) 10.8 (.425) 13.2 (.520) (1.082) na C na na na C C C C Coaxial, rf & microwave ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube helical tube helical tube helical tube helical tube Full Line Catalog Radiall is IO 9001: 2008 certified and dedicated to continuous improvement programs that have resulted in also being A9100, T16949 and IO certified. In addition, Radiall is committed to investing in its people, future technologies and the environment, such as being RoH (Restriction of Hazardous ubstances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemical substances) compliant. For more information about cables manufactured by Radiall, please consult our online catalog. Radiall is a global leader in the design, development and manufacturing of leading edge interconnect solutions. edicated to understanding its customers needs since 1952, Radiall has earned the reputation of being the best of the best in engineering ingenuity by providing a constant flow of creative system solutions serving the telecommunications, aerospace, defense, instrumentation, automotive, industrial, medical and broadcast markets. Coaxial, rf & microwave