LC 2 MOS 8-/16-Channel High Performance Analog Multiplexers ADG406/ADG407/ADG426

Size: px
Start display at page:

Download "LC 2 MOS 8-/16-Channel High Performance Analog Multiplexers ADG406/ADG407/ADG426"

Transcription

1 LC 2 MOS 8-/16-Channel High Performance Analog Multiplexers AG406/AG407/AG426 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (80 Ω maximum) Low power Fast switching ton < 160 ns toff < 150 ns Break-before-make switching action APPLICATIONS Audio and video routing Automatic test equipment ata acquisition systems Battery powered systems Sample hold systems Communication systems Avionics PROUCT HIGHLIGHTS 1. Extended Signal Range. 2. The AG406/AG407/AG426 are fabricated on an enhanced LC 2 MOS process giving an increased signal range which extends to the supply rails. 3. Low Power issipation. 4. Low RON. 5. Single/ual Supply Operation. 6. Single Supply Operation. 7. For applications where the analog signal is unipolar, the AG406/AG407/AG426 can be operated from a single rail power supply. The parts are fully specified with a single +12 V power supply and remain functional with single supplies as low as +5 V. FUNCTIONAL BLOCK IAGRAMS 6 A S8A B S8B AG406 1 OF 16 ECOER A0 A1 A2 A3 Figure 1. AG407 1 OF 8 ECOER A0 A1 A2 Figure 2. AG A B WR ECOER/ LATCHES A0 A1 A2 A3 Figure Rev. B Information furnished by Analog evices is believed to be accurate and reliable. However, no responsibility is assumed by Analog evices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog evices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA , U.S.A. Tel: Fax: Analog evices, Inc. All rights reserved.

2 TABLE OF CONTTS Features... 1 Applications... 1 Product Highlights... 1 Functional Block iagrams... 1 Revision History... 2 General escription... 3 Specifications... 4 ual Supply... 4 Single Supply... 6 AG426 Timing iagrams...7 Absolute Maximum Ratings...8 ES Caution...8 Pin Configurations and Function escriptions...9 Typical Performance Characteristics Test Circuits Terminology Outline imensions Ordering Guide REVISION HISTORY 5/10 Rev. A to Rev. B Changes to Ordering Guide /09 Rev. 0 to Rev. A Updated Format... Universal Removed T Grade... Universal Added Table Added Table Added Table Updated Outline imensions Changes to Ordering Guide /94 Revision 0: Initial Version Rev. B Page 2 of 20

3 GERAL ESCRIPTION The AG406, AG407, and AG426 are monolithic CMOS analog multiplexers. The AG406 and AG426 switch one of sixteen inputs to a common output as determined by the 4-bit binary address lines: A0, A1, A2, and A3. The AG426 has on-chip address and control latches that facilitate microprocessor interfacing. The AG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An input on all devices is used to enable or disable the device. When disabled, all channels are switched off. The AG406/AG407/AG426 are designed on an enhanced LC 2 MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power dissipation makes the parts suitable for battery powered systems. Each channel conducts equally well in both directions when on and has an input signal range which extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All channels exhibit breakbefore-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs. Rev. B Page 3 of 20

4 SPECIFICATIONS UAL SUPPLY V = +15 V ± 10%, VSS = 15 V ± 10%, GN = 0 V, unless otherwise noted. Table 1. Parameter C 40 C to +85 C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range VSS to V V RON 50 Ω typ V = ±10 V, IS = 1 ma Ω max V = V, VSS = 13.5 V RON Match 4 Ω typ V = 0 V, IS = 1 ma LEAKAGE CURRTS V = V, VSS = 16.5 V Source Off Leakage IS (Off) ±0.5 ±20 na max V = ±10 V, VS = +10 V, see Figure 26 rain Off Leakage I (Off) V = ±10 V, VS = +10 V; see Figure 27 AG406, AG426 ±1 ±20 na max AG407 ±1 ±20 na max Channel On Leakage I, IS (On) VS = V = ±10 V; see Figure 28 AG406, AG426 ±1 ±20 na max AG407 ±1 ±20 na max IGITAL INPUTS Input High Voltage, VINH 2.4 V min Input Low Voltage, VINL 0.8 V max Input Current IINL or IINH ±1 μa max VIN = 0 or V CIN, igital Input Capacitance 8 pf typ f = 1 MHz YNAMIC CHARACTERISTICS 2 ttransition 120 ns typ RL = 300 Ω, CL = 35 pf; V1 = ±10 V, V2 = +10 V; see Figure ns max Break Before Make elay, top ns min RL = 300 Ω, CL = 35 pf; VS = +5 V, see Figure 30 ton (, WR) ns typ RL = 300 Ω, CL = 35 pf; VS = 5 V, see Figure ns max toff (, ) ns typ RL = 300 Ω, CL = 35 pf; VS = 5 V, see Figure ns max AG426 Only tw, Write Pulse Width 100 ns min ts, Address, Enable Setup Time 100 ns min th, Address, Enable Hold Time 10 ns min t, Reset Pulse Width 100 ns min VS = +5 V Charge Injection 8 pc typ VS = 0 V, = 0 Ω, CL = 1 nf; See Figure 34 Off Isolation 75 db typ RL = 1 k Ω, f = 100 khz; V = 0 V, see Figure 35 Channel-to-Channel Crosstalk 85 db typ RL = 1 k Ω, f = 100 khz, see Figure 36 CS (Off) 5 pf typ f = 1 MHz C (Off) f = 1 MHz AG406, AG pf typ AG pf typ C, CS (On) f = 1 MHz AG406, AG pf typ AG pf typ Rev. B Page 4 of 20

5 Parameter C 40 C to +85 C Unit Test Conditions/Comments POWER REQUIREMTS V = V, VSS = 16.5 V I 1 μa typ VIN = 0 V, V = 0 V 5 μa max ISS 1 μa typ 5 μa max I 100 μa typ VIN = 0 V, V = 2.4 V μa max ISS 1 μa typ 5 μa max 1 Temperature ranges is 40 C to +85 C. 2 Guaranteed by design, not subject to production test. Rev. B Page 5 of 20

6 SINGLE SUPPLY V = +12 V ± 10%, VSS = 0 V, GN = 0 V, unless otherwise noted. Table 2. Parameter C 40 C to +85 C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range 0 to V V RON 90 Ω typ V = +3 V, +8.5 V, IS = 1 ma; Ω max V = V LEAKAGE CURRTS V = V Source Off Leakage IS (Off) ±0.5 ±20 na max V = 8 V/0.1 V, VS = 0.1 V/8 V; see Figure 26 rain Off Leakage I (Off) V = 8 V/0.1 V, VS = 0.1 V/8 V; see Figure 27 AG406, AG426 ±1 ±20 na max AG407 ±1 ±20 na max Channel On Leakage I, IS (On) VS = V = 8 V/0.1 V, see Figure 28 AG406, AG426 ±1 ±20 na max AG407 ±1 ±20 na max IGITAL INPUTS Input High Voltage, VINH 2.4 V min Input Low Voltage, VINL 0.8 V max Input Current IINL or IINH ±1 μa max VIN = 0 or V CIN, igital Input Capacitance 8 pf typ f = 1 MHz YNAMIC CHARACTERISTICS 2 ttransition 180 ns typ RL = 300 Ω, CL = 35 pf; V1 = 8 V/0 V, V2 = 0 V/8 V; see Figure ns max Break Before Make elay, top 10 ns typ RL = 300 Ω, CL = 35 pf; VS = 5 V, see Figure 30 ton (, WR) 180 ns typ RL = 300 Ω, CL = 35 pf; ns max VS = +5 V, see Figure 31 toff (, ) 135 ns typ RL = 300 Ω, CL = 35 pf; VS = 5 V, see Figure ns max AG426 Only tw, Write Pulse Width 100 ns min ts, Address, Enable Setup Time 100 ns min th, Address, Enable Hold Time 10 ns min t, Reset Pulse Width 100 ns min VS = +5 V Charge Injection 5 pc typ VS = 6 V, = 0 Ω, CL = 1 nf; see Figure 34 Off Isolation 75 db typ RL = 1 kω, f = 100 khz; see Figure 35 Channel-to-Channel Crosstalk 85 db typ RL = 1 kω, f = 100 khz; see Figure 36 CS (Off) 8 pf typ f = 1 MHz C (Off) f = 1 MHz AG406, AG pf typ AG pf typ f = 1 MHz C, CS (On) AG406, AG pf typ AG pf typ POWER REQUIREMTS V = V I 1 μa typ VIN = 0 V, V = 0 V 5 μa max I 100 μa typ VIN = 0 V, V = 2.4 V μa max 1 Temperature range is 40 C to +85 C. 2 Guaranteed by design, not subject to production test. Rev. B Page 6 of 20

7 AG426 TIMING IAGRAMS 3V WR 50% 50% 0V t W 3V 0V 50% 50% t W 3V A0, A1, A2, (A3) 0V 2V t S t H 0.8V Figure 4. Timing Sequence for Latching the Switch Address and Enable Inputs Figure 4 shows the timing sequence for latching the switch address and enable inputs. The latches are level sensitive; therefore, while WR is held low, the latches are transparent and the switches respond to the address and enable inputs. This input data is latched on the rising edge of WR SWITCH OUTPUT 0V t OFF () V 0 0.8V 0 Figure 5. Reset Pulse Width and Reset Turn Off Time Figure 5 shows the reset pulse width, trs, and the reset turn off time, toff (). Note that all digital input signals rise and fall times are measured from 10% to 90% of 3 V; tr = tf = 20 ns Rev. B Page 7 of 20

8 ABSOLUTE MAXIMUM RATINGS TA = 25 C unless otherwise noted. Table 3. Parameter Rating V to VSS 44 V V to GN 0.3 V to +25 V VSS to GN +0.3 V to 25 V Analog, igital Inputs 1 VSS 2 V to V + 2 V or 20 ma, whichever occurs first Continuous Current, S or 20 ma Peak Current, S or 40 ma (Pulsed at 1 ms, 10% duty cycle max) Operating Temperature Range Industrial (B Version) 40 C to +85 C Storage Temperature Range 65 C to +150 C Junction Temperature 150 C Plastic Package θja, Thermal Impedance 75 C/W Lead Temperature, Soldering 260 C (10 sec) PLCC Package θja, Thermal Impedance 80 C/W Lead Temperature, Soldering Vapor Phase (60 sec) 215 C Infrared (15 sec) 220 C SSOP Package θja, Thermal Impedance 122 C/W Lead Temperature, Soldering Vapor Phase (60 sec) 215 C Infrared (15 sec) 220 C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ES CAUTION 1 Overvoltages at A, S,, WR, or will be clamped by internal diodes. Current should be limited to the maximum ratings given. Rev. B Page 8 of 20

9 PIN CONFIGURATIONS AN FUNCTION ESCRIPTIONS 1 NC 2 NC S9 11 GN 12 NC 13 A3 14 AG406 TOP VIEW (Not to Scale) S8 25 S7 24 S6 23 S5 22 S4 21 S3 20 S A0 16 A1 15 A2 NC = NO CONNECT Figure Lead PIP S NC NC S PIN 1 INTFIER AG406 TOP VIEW (Not to scale) GN NC A3 A2 A1 A0 NC = NO CONNECT Figure Lead PLCC S7 S6 S5 S4 S3 S Table 4. Pin Function escriptions Pin No. Mnemonic escription 1 V Most Positive Power Supply Potential. 2, 3, 13 NC No Connect. 4 to 11 6 to S9 Source Terminal 16 to Source Terminal 9. These pins can be inputs or outputs. 12 GN Ground (0 V) Reference. 14 to 17 A3 to A0 Logic Control Input. 18 Active High igital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin is high, the Ax logic inputs determine which switch is turned on. 19 to 26 to 8 Source Terminal 1 to Source Terminal 8. These pins can be inputs or outputs. 27 VSS Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground. 28 rain Terminal. This pin can be an input or an output. Table 5. Truth Table (AG406) A3 A2 A1 A0 On Switch X X X X 0 None Rev. B Page 9 of 20

10 1 B 2 NC 3 S8B 4 S7B 5 S6B 6 28 A S8A 25 S7A 24 S6A 23 S5A S5B 7 (Not to Scale) 22 S4A S4B 8 21 S3A S3B 9 20 S2A S2B 10 B 11 GN 12 NC 13 NC 14 AG407 TOP VIEW NC = NO CONNECT 19 A A0 16 A1 15 A2 Figure Lead PIP S7B S6B S5B S4B S3B S2B B S8B NC B A S8A PIN 1 INTFIER AG407 TOP VIEW (Not to scale) GN NC NC A2 A1 A0 NC = NO CONNECT Figure Lead PLCC S7A S6A S5A S4A S3A S2A A Table 6. Pin Function escriptions Pin No. Mnemonic escription 1 V Most Positive Power Supply Potential. 2 B rain Terminal B. This pin can be an input or an output. 3, 13, 14 NC No Connect. 4 to 11 S8B to B Source Terminal 8B to Source Terminal 1B. These pins can be inputs or outputs. 12 GN Ground (0 V) Reference. 15 to 17 A2 to A0 Logic Control Input. 18 Active High igital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin is high, the Ax logic inputs determine which switch is turned on. 19 to 26 A to S8A Source Terminal 1A to Source Terminal 8A. These pins can be inputs or outputs. 27 VSS Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground. 28 A rain Terminal A. This pin can be an input or an output. Table 7. Truth Table (AG407) A2 A1 A0 On Switch Pair X X X 0 None Rev. B Page 10 of 20

11 1 NC S8 25 S S6 AG S5 TOP VIEW (Not to Scale) S S S S9 11 GN 12 WR 13 A3 14 NC = NO CONNECT A0 16 A1 15 A2 Figure Lead PIP/SSOP Table 8. Pin Function escriptions Pin No. Mnemonic escription 1 V Most Positive Power Supply Potential. 2 NC No Connect. 3 Active Low Logic Input. When this pin is low, all switches are open, and address and enable latches registers are cleared to 0. 4 to 11 6 to S9 Source Terminal 16 to Source Terminal 9. These pins can be inputs or outputs. 12 GN Ground (0 V) Reference. 13 WR The rising edge of the WR signal latches the state of the address control lines and the enable line. 14 to 17 A3 to A0 Logic Control Input. 18 Active High igital Input. When this pin is low, the device is disabled and all switches are turned off. When this pin is high, the Ax logic inputs determine which switch is turned on. 19 to 26 to S8 Source Terminal 1 to Source Terminal 8. These pins can be inputs or outputs. 27 VSS Most Negative Power Supply Potential. In single-supply applications, this pin can be connected to ground. 28 rain Terminal. This pin can be an input or an output. Table 9. Truth Table (AG426) A3 A2 A1 A0 WR On switch X X X X X 1 Retains previous switch condition X X X X X X 0 None (address and enable latches cleared) X X X X None Rev. B Page 11 of 20

12 TYPICAL PERFORMANCE CHARACTERISTICS = +5V = 5V T A = 25 C = +5V =0V T A = 25 C R ON (Ω) = +10V = 10V = +15V = 15V = +12V = 12V R ON (Ω) = +15V = 0V = +10V =0V = +12V =0V V (V S ) (V) V (V S ) (V) Figure 11. RON as a Function of V (VS): ual Supplies Figure 14. RON as a Function of V (VS): Single Supplies 100 = +15V = 15V 150 = 12V =0V R ON (Ω) C 25 C 125 C R ON (Ω) C 25 C 125 C LEAKAGE CURRT (na) V (V S ) (V) Figure 12. RON as a Function of V (VS) for ifferent Temperatures = +15V = 15V T A =+25 C V (V S ) (V) I S (OFF) I (ON) I (OFF) Figure 13. Leakage Currents as a Function of V (VS) LEAKAGE CURRT (na) V (V S ) (V) Figure 15. RON as a Function of V (VS) for ifferent Temperatures = +12V =0V T A =+25 C I S (OFF) I (OFF) I (ON) V (V S ) (V) Figure 16. Leakage Currents as a Function of V (VS) Rev. B Page 12 of 20

13 100 = +15V = 15V = +15V = 15V 10 1 I (ma) = 2.4V I SS (ma) 0.1 = 2.4V = 0V k 10k 100k 1M 10M FREQUCY (Hz) = 0V Figure 17. Positive Supply Current vs. Switching Frequency k 10k 100k 1M 10M FREQUCY (Hz) Figure 20. Negative Supply Current vs. Switching Frequency t ON = +15V = 15V t ON = +12V =0V 180 t TRANSITION t (ns) t TRANSITION t (ns) t OFF V IN (V) Figure 18. Switching Time vs. VIN (Bipolar Supply) t OFF V IN (V) Figure 21. Switching Time vs. VIN (Single Supply) V IN = +5V V IN = +5V 400 t TRANSITION 200 t ON 300 t (ns) t ON t (ns) 100 t TRANSITION 200 t OFF t OFF ±5 ±7 ±9 ±11 ±13 ±15 ±17 ±19 ±21 SUPPLY VOLTAGE (V) Figure 19. Switching Time vs. Bipolar Supply SUPPLY VOLTAGE (V) Figure 22. Switching Time vs. Single Supply Rev. B Page 13 of 20

14 140 = +15V = 15V 140 = +15V = 15V OFF ISOLATION (db) CROSSTALK (db) k 10k 100k 1M 10M k 10k 100k 1M 10M FREQUCY (Hz) Figure 23. Off Isolation vs. Frequency FREQUCY (Hz) Figure 24. Crosstalk vs. Frequency Rev. B Page 14 of 20

15 TEST CIRCUITS I S V S S V1 R ON = V1/I S V S S2 6 I (OFF) A +0.8V V Figure 25. On Resistance Figure 27. I (Off) I S (OFF) A S2 I (ON) A V S V 6 Figure 26. IS (Off) +0.8V V S 6 Figure 28. I (On) +2.4V V V V IN 50Ω A3 A2 S2 THRU 5 A1 6 A0 AG V GN WR 1 SIMILAR CONNECTION FOR AG406/AG407 V 1 V 2 R L 300Ω C L 35pF V OUT ARESS RIVE (V IN ) V OUT t TRANSITION 50% 50% 90% 90% t TRANSITION Figure 29. Switching Time of Multiplexer, ttransition 3V V IN 50Ω 2.4V A3 A2 S2 THRU 5 A1 6 A0 AG426 1 GN WR R L 300Ω V S C L 35pF ARESS RIVE (V IN ) V OUT OUTPUT 0V 80% 80% 1 SIMILAR CONNECTION FOR AG406/AG407 t OP Figure 30. Break-Before-Make elay, top Rev. B Page 15 of 20

16 V IN 2.4V 50Ω A3 A2 S2 THRU 6 A1 A0 AG426 1 GN WR V S R L 300Ω 3V ABLE RIVE (V IN ) 50% 50% 0V V O V OUT OUTPUT C L 90% 90% 35pF 0V t OFF () 1 SIMILAR CONNECTION FOR AG406/AG407 t ON () Figure 31. Enable elay, ton (), toff () A3 A2 S2 THRU 6 A1 A0 AG426 V S 3V WR 0V V 0 50% 2.4V V WR GN R L 300Ω C L 35pF V OUT OUTPUT 0V t ON (WR) 0.2V 0 V WR Figure 32. Write Turn-On Time, ton (WR) V V IN A3 A2 S2 THRU 6 A1 A0 AG426 GN WR V S R L 300Ω C L 35pF V OUT 3V 0V V 0 OUTPUT 0V 50% t OFF () 0.8V Figure 33. Reset Turn-Off Time, toff () Rev. B Page 16 of 20

17 V S R S V IN A3 A2 A1 A0 AG426 1 S GN WR 2.4V C L 1nF V OUT 3V LOGIC INPUT (V IN ) V OUT Q INJ = C L ΔV OUT ΔV OUT 1 SIMILAR CONNECTION FOR AG406/AG407. Figure 34. Charge Injection V A3 A2 A1 6 A0 AG426 1 GN WR R L 1kΩ V IN V OUT V IN 2.4V 1kΩ S2 A0 A1 AG426 1 A2 A3 GN WR 1kΩ V OUT 1 SIMILAR CONNECTION FOR AG406/AG SIMILAR CONNECTION FOR AG406/AG Figure 35. Off Isolation Figure 36. Crosstalk Rev. B Page 17 of 20

18 TERMINOLOGY V Most positive power supply potential. VSS Most negative power supply potential in dual supplies. In single supply applications, it may be connected to ground. GN Ground (0 V) reference. RON Ohmic resistance between the and S terminals. RON Match ifference between the RON of any two channels. IS (Off) Source leakage current when the switch is off. I (Off) rain leakage current when the switch is off. I, IS (On) Channel leakage current when the switch is on. V (VS) Analog voltage on Terminal, Terminal S. CS (Off) Channel input capacitance for off condition. C (Off) Channel output capacitance for off condition. C, CS (ON) On switch capacitance. CIN igital input capacitance. ton () elay time between the 50% and 90% points of the digital input and switch on condition. toff () elay time between the 50% and 90% points of the digital input and switch off condition. ttransition elay time between the 50% and 90% points of the digital inputs and the switch on condition when switching from one address state to another. top Off time measured between 80% points of both switches when switching from one address state to another. VINL Maximum input voltage for Logic 0. VINH Minimum input voltage for Logic 1. IINL (IINH) Input current of the digital input. Crosstalk A measure of unwanted signal which is coupled through from one channel to another as a result of parasitic capacitance. Off Isolation A measure of unwanted signal coupling through an off channel. Charge Injection A measure of the glitch impulse transferred from the digital input to the analog output during switching. I Positive supply current. ISS Negative supply current. Rev. B Page 18 of 20

19 OUTLINE IMSIONS (39.75) (35.05) (14.73) (12.31) (6.35) MAX (5.08) (2.92) (0.56) (0.36) (2.54) BSC (1.78) (1.27) (0.38) GAUGE PLANE (0.38) MIN SEATING PLANE (0.13) MIN (15.88) (15.24) (17.78) MAX (4.95) (3.17) (0.38) (0.20) COMPLIANT TO JEEC STANA MS-011 CONTROLLING IMSIONS ARE IN INCHES; MILLIMETER IMSIONS (IN PARTHESES) ARE ROUNE-OFF INCH EQUIVALTS FOR REFERCE ONLY AN ARE NOT APPROPRIATE FOR USE IN ESIGN. CORNER LEAS MAY BE CONFIGURE AS WHOLE LEAS. Figure Lead Plastic ual In-Line Package {PIP} Wide Body (N-28-2) imensions shown in inches and (millimeters) A (1.22) (1.07) (1.22) (1.07) PIN 1 ITIFIER TOP VIEW (PINS OWN) (11.582) SQ (11.430) (12.57) (12.32) SQ (1.42) (1.07) (1.27) BSC (3.04) (2.29) (4.57) (4.19) (0.51) MIN (0.53) (0.33) (0.81) (0.66) (1.14) (0.64) R (10.92) (9.91) BOTTOM VIEW (PINS UP) COMPLIANT TO JEEC STANA MO-047-AB CONTROLLING IMSIONS ARE IN INCHES; MILLIMETER IMSIONS (IN PARTHESES) ARE ROUNE-OFF INCH EQUIVALTS FOR REFERCE ONLY AN ARE NOT APPROPRIATE FOR USE IN ESIGN. Figure Lead Plastic Leaded Chip Carrier [PLCC] (P-28) imensions shown in inches and (millimeters) A Rev. B Page 19 of 20

20 MAX MIN COPLANARITY BSC SEATING PLANE COMPLIANT TO JEEC STANA MO-150-AH Figure Lead Shrink Small Outline Package [SSOP] (-28) imensions shown in millimeters A ORERING GUIE Model 1 Temperature Range Package escription Package Option 2 AG406BN 40 C to +85 C 28-Lead PIP N-28-2 AG406BNZ 40 C to +85 C 28-Lead PIP N-28-2 AG406BP 40 C to +85 C 28-Lead PLCC P-28 AG406BP-REEL 40 C to +85 C 28-Lead PLCC P-28 AG406BPZ 40 C to +85 C 28-Lead PLCC P-28 AG406BPZ-REEL 40 C to +85 C 28-Lead PLCC P-28 AG407BN 40 C to +85 C 28-Lead PIP N-28-2 AG407BNZ 40 C to +85 C 28-Lead PIP N-28-2 AG407BP 40 C to +85 C 28-Lead PLCC P-28 AG407BP-REEL 40 C to +85 C 28-Lead PLCC P-28 AG407BPZ 40 C to +85 C 28-Lead PLCC P-28 AG407BPZ-RL 40 C to +85 C 28-Lead PLCC P-28 AG407BCHIPS 40 C to +85 C IE AG426BN 40 C to +85 C 28-Lead PIP N-28-2 AG426BNZ 40 C to +85 C 28-Lead PIP N-28-2 AG426B 40 C to +85 C 28-Lead SSOP -28 AG426B-REEL 40 C to +85 C 28-Lead SSOP -28 AG426B-REEL7 40 C to +85 C 28-Lead SSOP -28 AG426BZ 40 C to +85 C 28-Lead SSOP -28 AG426BZ-REEL 40 C to +85 C 28-Lead SSOP Z = RoHS Compliant Part. 2 N = Plastic IP, P = Plastic Leaded Chip Carrier (PLCC), = Shrink Small Outline Package (SSOP) Analog evices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners /10(B) Rev. B Page 20 of 20

21 Mouser Electronics Authorized istributor Click to View Pricing, Inventory, elivery & Lifecycle Information: Analog evices Inc.: AG426B AG407BP-REEL AG406BNZ AG406BPZ AG426B-REEL AG407BP AG426BNZ AG406BP AG406BPZ-REEL AG407BNZ AG407BPZ AG426BZ-REEL AG406BP-REEL AG426BZ AG426B-REEL7

LC 2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409

LC 2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409 LC 2 MOS 4-/8-Channel High Performance Analog Multiplexers AG408/AG409 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance ( Ω maximum) Low power (ISUPPLY < 75 μa) Fast

More information

8-Channel Fault-Protected Analog Multiplexer ADG528F

8-Channel Fault-Protected Analog Multiplexer ADG528F 8-Channel Fault-Protected Analog Multiplexer AG528F FEATURES Low on resistance (300 Ω typical) Fast switching times ton: 250 ns maximum toff: 250 ns maximum Low power dissipation (3.3 mw maximum) Fault

More information

CMOS, 1.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers ADG708/ADG709

CMOS, 1.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers ADG708/ADG709 ata Sheet CMOS,.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers AG78/AG79 FEATURES.8 V to 5.5 V single supply ±2.5 V dual supply 3 Ω on resistance.75 Ω on resistance flatness pa leakage

More information

Quad SPDT Switch ADG333A

Quad SPDT Switch ADG333A Quad SPT Switch AG333A FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (45 Ω max) Low RON (5 Ω max) Low RON match (4 Ω max) Low power dissipation Fast switching times

More information

CMOS, 1.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers ADG708/ADG709

CMOS, 1.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers ADG708/ADG709 CMOS,.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers AG78/AG79 FEATURES.8 V to 5.5 V single supply ±2.5 V dual supply 3 Ω on resistance.75 Ω on resistance flatness pa leakage currents 4

More information

Dual SPDT Switch ADG436

Dual SPDT Switch ADG436 ual SPT Switch AG436 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (12 Ω typ) Low RON (3 Ω max) Low RON match (2.5 Ω max) Low power dissipation Fast switching times

More information

Quad SPDT ±15 V/+12 V Switches ADG1334

Quad SPDT ±15 V/+12 V Switches ADG1334 Quad SPT ±15 V/+12 witches AG1334 FEATURES 33 V supply range 13 Ω on resistance Fully specified at ±15 V/+12 V 3 V logic compatible inputs Rail-to-rail operation Break-before-make switching action 2-lead

More information

LC 2 MOS Precision Mini-DIP Analog Switch ADG419

LC 2 MOS Precision Mini-DIP Analog Switch ADG419 LC 2 MOS Precision Mini-IP Analog Switch AG419 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:

More information

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V, 4:1 Multiplexer ADG1604

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V, 4:1 Multiplexer ADG1604 ata Sheet FEATURES 1 Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual-supply operation 3.3 V to 16 V single-supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail

More information

4 Ω RON, 4-/8-Channel ±15 V/+12 V/±5 V icmos Multiplexers ADG1408-EP/ADG1409-EP

4 Ω RON, 4-/8-Channel ±15 V/+12 V/±5 V icmos Multiplexers ADG1408-EP/ADG1409-EP Enhanced Product 4 Ω RON, 4-/-Channel ±5 V/+2 V/±5 V icmos Multiplexers AG4-EP/AG49-EP FEATURES 4.7 Ω maximum on resistance @ 25 C.5 Ω on resistance flatness Up to 9 ma continuous current Fully specified

More information

1.5 Ω On Resistance, ±15 V/12 V/±5 V, 4:1, icmos Multiplexer ADG1404

1.5 Ω On Resistance, ±15 V/12 V/±5 V, 4:1, icmos Multiplexer ADG1404 ata Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, 4:, icmos Multiplexer AG44 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Up to 4 ma continuous current Fully

More information

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849 3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High

More information

Low Capacitance, Low Charge Injection, ±15 V/12 V icmos, Dual SPDT Switch ADG1236

Low Capacitance, Low Charge Injection, ±15 V/12 V icmos, Dual SPDT Switch ADG1236 ata Sheet Low Capacitance, Low Charge Injection, ±5 V/2 V icmos, ual SPT Switch FEATURES.3 pf off capacitance 3.5 pf on capacitance pc charge injection 33 V supply range 2 Ω on resistance Fully specified

More information

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719-EP

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719-EP CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPT Switch in SOT-23 AG719-EP FEATURES 1.8 V to 5.5 V single supply 4 Ω (max) on resistance.75 Ω (typ) on resistance flatness 3 db bandwidth > 2 MHz Rail-to-rail operation

More information

Low Capacitance, 16- and 8-Channel ±15 V/+12 V icmos Multiplexers ADG1206/ADG1207

Low Capacitance, 16- and 8-Channel ±15 V/+12 V icmos Multiplexers ADG1206/ADG1207 Low Capacitance, 16- and 8-Channel ±15 V/+12 V icmos Multiplexers AG126/AG127 FEATURES

More information

0.5 Ω CMOS 1.65 V TO 3.6 V 4-Channel Multiplexer ADG804

0.5 Ω CMOS 1.65 V TO 3.6 V 4-Channel Multiplexer ADG804 ata Sheet FEATURES.5 Ω typical on resistance.8 Ω maximum on resistance at 125 C 1.65 V to 3.6 V operation Automotive temperature range: 4 C to +125 C High current carrying capability: 3 ma continuous Rail-to-rail

More information

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L .5 Ω CMOS 1.65 V to 3.6 V ual SPT/2:1 MUX AG836L FEATURES.5 Ω typical on resistance.8 Ω maximum on resistance at 125 C 1.65 V to 3.6 V operation Automotive temperature range: 4 C to +125 C Guaranteed leakage

More information

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824 ata Sheet.5 Ω CMOS.65 V to 3.6 V ual SPT/2: Mux in Mini LFCSP Package FEATURES.5 Ω typical on resistance.85 Ω maximum on resistance at 85 C.65 V to 3.6 V operation High current carrying capability: 3 ma

More information

4 Ω RON, 4-/8-Channel ±15 V/+12 V/±5 V icmos Multiplexers ADG1408/ADG1409

4 Ω RON, 4-/8-Channel ±15 V/+12 V/±5 V icmos Multiplexers ADG1408/ADG1409 4 Ω RON, 4-/-Channel ±5 V/+ V/±5 V icmos Multiplexers AG4/AG49 FEATURES 4.7 Ω maximum on resistance @ 5 C.5 Ω on resistance flatness Up to 9 ma continuous current Fully specified at ±5 V/+ V/±5 V 3 V logic-compatible

More information

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839 .35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55

More information

0.58 Ω CMOS, 1.8 V to 5.5 V, Quad SPDT/2:1 Mux in Mini LFCSP ADG858

0.58 Ω CMOS, 1.8 V to 5.5 V, Quad SPDT/2:1 Mux in Mini LFCSP ADG858 ata Sheet FEATURES.58 Ω typical on resistance.82 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability: 25 ma continuous Rail-to-rail switching operation Fast-switching

More information

High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers ADG5408/ADG5409

High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers ADG5408/ADG5409 ata Sheet FEATURES Latch-up proof 8 kv human body model (HBM) ES rating Low on resistance (3.5 Ω) ±9 V to ±22 V dual-supply operation 9 V to 4 V single-supply operation 48 V supply maximum ratings Fully

More information

1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859

1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859 1.3 Ω CMOS, 1.8 V to 5.5 ingle SPT Switch/2:1 MUX in SOT-66 Package AG859 FEATURES 1.8 V to 5.5 V single supply Tiny 1.65 mm 1.65 mm package Low on resistance: 1.3 Ω at 5 V supply High current-carrying

More information

High Voltage, Latch-up Proof, 4-Channel Multiplexer ADG5404

High Voltage, Latch-up Proof, 4-Channel Multiplexer ADG5404 ata Sheet FEATURES Latch-up proof 8 kv HBM ES rating Low on resistance (

More information

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C

More information

±15 V/12 V Quad SPST Switches ADG1311/ADG1312/ADG1313

±15 V/12 V Quad SPST Switches ADG1311/ADG1312/ADG1313 ±5 V/2 V Quad PT witches AG3/AG32/AG33 FEATURE 33 V supply range Fully specified at +2 V, ±5 V 3 Ω on resistance No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 6-lead TOP and

More information

0.5 Ω CMOS, Dual 2:1 MUX/SPDT Audio Switch ADG884

0.5 Ω CMOS, Dual 2:1 MUX/SPDT Audio Switch ADG884 ata Sheet FEATURES.8 V to 5.5 V operation Ultralow on resistance.28 Ω typical at 5 V supply.4 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion. Ω typical.5 Ω maximum RON flatness

More information

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A Low Voltage, 4 MHz, Quad 2:1 Mux with 3 ns Switching Time FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation

More information

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS 4.5 Ω RON, 6-Channel, Differential 8-Channel, ±5 V,+2 V,+5 V, and +3.3 V Multiplexers ADG66/ADG67 FEATURES 4.5 Ω typical on resistance. Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3

More information

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636 FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation

More information

Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos SPST in SOT-23 ADG1201/ADG1202

Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos SPST in SOT-23 ADG1201/ADG1202 Low Capacitance, Low Charge Injection, ±15 V/+12 V icmo PT in OT-23 AG121/AG122 FEATURE 2.4 pf off capacitance

More information

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453 LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5

More information

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L CMO Low Voltage 2.5 Ω ual PT witch AG736L FEATURE 1.8 V to 5.5 V single supply 2.5 Ω (typical) on resistance Low on-resistance flatness Guaranteed leakage performance over 40 C to +85 C 3 db bandwidth

More information

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436 Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

LC 2 MOS Quad SPST Switches ADG441/ADG442/ADG444

LC 2 MOS Quad SPST Switches ADG441/ADG442/ADG444 LC 2 MOS Quad SPST Switches ADG441/ADG442/ADG444 FEATURES 44 V supply maximum ratings VSS to VDD analog signal range Low on resistance (

More information

CMOS Low Power Dual 2:1 Mux/Demux USB 2.0 (480 Mbps)/USB 1.1 (12 Mbps) ADG772

CMOS Low Power Dual 2:1 Mux/Demux USB 2.0 (480 Mbps)/USB 1.1 (12 Mbps) ADG772 CMOS Low Power ual : Mux/emux USB. (8 Mbps)/USB. ( Mbps) FEATURES USB. (8 Mbps) and USB. ( Mbps) signal switching compliant Tiny -lead.3 mm. mm mini LFCSP package and -lead 3 mm 3 mm LFCSP package.7 V

More information

0.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 ADG841/ADG842

0.28 Ω CMOS 1.65 V to 3.6 V Single SPST Switches in SC70 ADG841/ADG842 .28 Ω CMO 1.65 V to 3.6 V ingle PT witches in C7 FEATURE Ultralow on resistance.28 Ω typical.48 Ω max at 125 C Excellent audio performance, ultralow distortion.25 Ω typical.52 Ω max RON flatness 1.65 V

More information

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719 CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPT Switch in SOT-23 FEATURES 1.8 V to 5.5 V single supply 4 Ω (max) on resistance 0.75 Ω (typ) on resistance flatness 3 db bandwidth > 200 MHz Rail-to-rail operation

More information

2.1 Ω On Resistance, ±15 V/+12 V/±5 V, ADG1419. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAMS APPLICATIONS GENERAL DESCRIPTION PRODUCT HIGHLIGHTS

2.1 Ω On Resistance, ±15 V/+12 V/±5 V, ADG1419. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAMS APPLICATIONS GENERAL DESCRIPTION PRODUCT HIGHLIGHTS ata Sheet 2. Ω On Resistance, ±5 V/+2 V/±5 V, icmos SPT Switch AG49 FEATURES 2. Ω on resistance.5 Ω maximum on-resistance flatness at 25 C Up to 39 ma continuous current Fully specified at +2 V, ±5 V,

More information

LC 2 MOS Precision 5 V Quad SPST Switches ADG661/ADG662/ADG663

LC 2 MOS Precision 5 V Quad SPST Switches ADG661/ADG662/ADG663 a FEATURE +5 V, 5 V Power upplies Ultralow Power issipation (

More information

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A Data Sheet FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation Very low distortion:

More information

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 .5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:

More information

CMOS ±5 V/+5 V, 4 Ω Dual SPST Switches ADG621/ADG622/ADG623

CMOS ±5 V/+5 V, 4 Ω Dual SPST Switches ADG621/ADG622/ADG623 CMO ±5 V/+5 V, 4 Ω ual PT witches AG62/AG622/AG623 FEATURE 5.5 Ω (maximum) on resistance.9 Ω (maximum) on resistance flatness 2.7 V to 5.5 V single supply ±2.7 V to ±5.5 V dual supply Rail-to-rail operation

More information

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888 FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying

More information

Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223

Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223 Data Sheet Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223 FEATURES

More information

2.5 Ω CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch ADG787

2.5 Ω CMOS Low Power Dual 2:1 Mux/Demux USB 1.1 Switch ADG787 2.5 Ω CMOS Low Power ual 2: Mux/emux USB. Switch AG787 FEATURES USB. signal switching compliant 3 db bandwidth 5 MHz Tiny -lead LFCSP, WLCSP, MSOP packages Single-supply.8 V to 5.5 V operation Low on resistance

More information

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794 Low Voltage, 300 MHz Quad 2: Mux Analog HDTV Audio/Video Switch FEATURES Bandwidth: 300 MHz Low insertion loss and on resistance: 5 Ω typical On-resistance flatness: 0.7 Ω typical Single 3.3 V/5 V supply

More information

High Temperature, High Voltage, Latch-Up Proof, 8-Channel Multiplexer ADG5298

High Temperature, High Voltage, Latch-Up Proof, 8-Channel Multiplexer ADG5298 Data Sheet High Temperature, High Voltage, Latch-Up Proof, 8-Channel Multiplexer FEATURES Extreme high temperature operation up to 2 C Latch-up proof JESD78D Class II rating Low leakage Ultralow capacitance

More information

CMOS, Low Voltage, 4 Ω Dual SPST Switches in 3 mm 2 mm LFCSP ADG721/ADG722/ADG723

CMOS, Low Voltage, 4 Ω Dual SPST Switches in 3 mm 2 mm LFCSP ADG721/ADG722/ADG723 ata heet CMO, Low Voltage, 4 Ω ual PT witches in 3 mm 2 mm LFCP AG72/AG722/AG723 FEATURE FUNCTIONAL BLOCK IAGRAM.8 V to 5.5 V single supply 4 Ω (max) on resistance Low on resistance flatness 3 db bandwidth

More information

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736 ata heet FEATURE 1.8 V to 5.5 V single supply Automotive temperature range: 40 C to +125 C 2.5 Ω (typical) on resistance Low on resistance flatness 3 db bandwidth > 200 MHz Rail-to-rail operation 10-lead

More information

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux in Chip Scale Package ADG784

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux in Chip Scale Package ADG784 a FEATURE Low Insertion Loss and On Resistance: 4 Typical On-Resistance Flatness 2 MHz ingle 3 V/5 upply Operation Rail-to-Rail Operation Very Low istortion:

More information

CMOS Low Voltage 2 Ω SPST Switches ADG701/ADG702

CMOS Low Voltage 2 Ω SPST Switches ADG701/ADG702 CMO Low Voltage 2 Ω PT witches AG701/AG702 FEATURE 1.8 V to 5.5 V single supply 2 Ω (typical) on resistance Low on resistance flatness 3 db bandwidth > 200 MHz Rail-to-rail operation Fast switching times

More information

LC2 MOS Precision 5 V/3 V Quad SPST Switches ADG511/ADG512/ADG513

LC2 MOS Precision 5 V/3 V Quad SPST Switches ADG511/ADG512/ADG513 a FEATURE +3 V, +5 V or 5 V Power upplies Ultralow Power issipation (

More information

High Voltage Latch-Up Proof, Triple/Quad SPDT Switches ADG5433/ADG5434

High Voltage Latch-Up Proof, Triple/Quad SPDT Switches ADG5433/ADG5434 FEATURES Latch-up proof Human body model (HBM) ESD rating: 8 kv Low on resistance (13.5 Ω) ±9 V to ±22 V dual-supply operation 9 V to 4 V single-supply operation 48 V supply maximum ratings Fully specified

More information

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774 a FEATURES Low Insertion Loss and On Resistance: 2.2 Typical On Resistance Flatness.5 Typical Automotive Temperature Range 4 C to +125 C 3 db Bandwidth = 24 MHz Single 3 V/5 upply Operation Rail-to-Rail

More information

CMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620

CMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620 CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation

More information

Fault Protection and Detection, 10 Ω RON, Quad SPST Switches ADG5412F-EP

Fault Protection and Detection, 10 Ω RON, Quad SPST Switches ADG5412F-EP Enhanced Product FEATURES Overvoltage protection up to 55 V and +55 V Power-off protection up to 55 V and +55 V Overvoltage detection on source pins Low on resistance: Ω On-resistance flatness:.5 Ω 5.5

More information

ADG1411/ADG1412/ADG1413

ADG1411/ADG1412/ADG1413 .5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

High Voltage Latch-Up Proof, Single SPDT Switch ADG5419

High Voltage Latch-Up Proof, Single SPDT Switch ADG5419 ata Sheet FEATURES Latch-up immune under all circumstances Human body model (HBM) ES rating: 8 kv Low on resistance: 13.5 Ω ±9 V to ±22 V dual-supply operation 9 V to 4 V single-supply operation 48 V supply

More information

CMOS 1.8 V to 5.5 V, 2.5 2:1 MUX/SPDT Switch in SC70 Package ADG749

CMOS 1.8 V to 5.5 V, 2.5 2:1 MUX/SPDT Switch in SC70 Package ADG749 a FEATURE 1.8 V to 5.5 ingle upply 5 (Max) On Resistance.75 (Typ) On Resistance Flatness Automotive Temperature Range: 4 C to +125 C 3 db Bandwidth > 2 MHz Rail-to-Rail Operation 6-Lead C7 Package Fast

More information

Low Capacitance, Low Charge Injection, ±15 V/+12 V, icmos, SPST in SOT-23 ADG1201

Low Capacitance, Low Charge Injection, ±15 V/+12 V, icmos, SPST in SOT-23 ADG1201 Low Capacitance, Low Charge Injection, ±15 V/+12 V, icmo, PT in OT-23 FEATURE 2.4 pf typical off switch source capacitance, dual supply

More information

9.5 Ω RON, ±15 V/+12 V/±5 V icmos, Serially-Controlled Octal SPST Switches ADG1414

9.5 Ω RON, ±15 V/+12 V/±5 V icmos, Serially-Controlled Octal SPST Switches ADG1414 9.5 Ω RON, ±5 V/+2 V/±5 V icmos, Serially-Controlled Octal SPST Switches FEATURES SPI interface Supports daisy-chain mode 9.5 Ω on resistance at 25 C and ±5 V dual supply.6 Ω on-resistance flatness at

More information

16-/32-Channel, Serially Controlled V to 5.5 V, 2.5 V, Analog Multiplexers ADG725/ADG731

16-/32-Channel, Serially Controlled V to 5.5 V, 2.5 V, Analog Multiplexers ADG725/ADG731 a 6-/32-Channel, Serially Controlled 4.8 V to 5.5 V, 2.5 V, Analog Multiplexers AG725/AG73 FEATURES 3-Wire SPI Compatible Serial Interface.8 V to 5.5 ingle Supply 2.5 V ual-supply Operation 4 On Resistance.5

More information

CMOS, Low Voltage RF/Video, SPST Switch ADG751

CMOS, Low Voltage RF/Video, SPST Switch ADG751 a FEATURE High Off Isolation 7 db at 1 MHz 3 db ignal Bandwidth 3 MHz +1.8 V to +. ingle upply Low On-Resistance (1 ) Fast witching Times t ON Typically 9 ns t OFF Typically 3 ns Typical Power Consumption

More information

CMOS, Low Voltage RF/Video, SPDT Switch ADG752

CMOS, Low Voltage RF/Video, SPDT Switch ADG752 a FEATURE High Off Isolation 80 db at 30 MHz 3 db ignal Bandwidth 20 MHz +1.8 V to +. ingle upply Low On-Resistance (1 Typically) Low On-Resistance Flatness Fast witching Times t ON Typically 8 ns t OFF

More information

High Voltage Latch-Up Proof, Single SPST Switch ADG5401

High Voltage Latch-Up Proof, Single SPST Switch ADG5401 ata heet FEATURE Latch-up immune under all circumstances Human body model (HBM) E rating: kv Low on resistance: 6.5 Ω ±9 V to ±22 V dual-supply operation 9 V to V single-supply operation V supply maximum

More information

2.5 V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch ADG3248

2.5 V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch ADG3248 2. V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch FEATURES 22 ps propagation delay through the switch 4. Ω switch connection between ports Data rate 1.244 Gbps 2. V/3.3 V supply operation Level translation

More information

Fault Protection and Detection, 10 Ω RON, 4-Channel Multiplexer ADG5404F

Fault Protection and Detection, 10 Ω RON, 4-Channel Multiplexer ADG5404F ata Sheet FEATURES Overvoltage protection up to 55 V and +55 V Power-off protection up to 55 V and +55 V Overvoltage detection on source pins Interrupt flags indicate fault status Low on resistance: 1

More information

8-Channel Latchable Multiplexers

8-Channel Latchable Multiplexers 9-359; Rev ; 3/9 8-Channel Latchable Multiplexers General escription Maxim s G528/G529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce

More information

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers 8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers ESCRIPTION The G48 is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a

More information

Octal, RS-232/RS-423 Line Driver ADM5170

Octal, RS-232/RS-423 Line Driver ADM5170 a FEATURES Eight Single Ended Line Drivers in One Package Meets EIA Standard RS-3E, RS-3A and CCITT V./X. Resistor Programmable Slew Rate Wide Supply Voltage Range Low Power CMOS 3-State Outputs TTL/CMOS

More information

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 FEATURES 100 ps propagation delay through the switch 2 Ω switches connect inputs to outputs Data rates up to 933 Mbps Single

More information

Microprocessor Supervisory Circuit ADM1232

Microprocessor Supervisory Circuit ADM1232 Microprocessor Supervisory Circuit FEATURES Pin-compatible with MAX1232 and Dallas DS1232 Adjustable precision voltage monitor with 4.5 V and 4.75 V options Adjustable strobe monitor with 150 ms, 600 ms,

More information

TABLE OF CONTENTS Specifications... 3 Absolute Maximum Ratings... 4 ESD Caution... 4 Pin Configurations and Function Descriptions... 5 Terminology...

TABLE OF CONTENTS Specifications... 3 Absolute Maximum Ratings... 4 ESD Caution... 4 Pin Configurations and Function Descriptions... 5 Terminology... FEATURES Wideband switch: 3 db @ 2.5 GHz ADG904: absorptive 4:1 mux/sp4t ADG904-R: reflective 4:1 mux/sp4t High off isolation (37 db @ 1 GHz) Low insertion loss (1.1 db dc to 1 GHz) Single 1.65 V to 2.75

More information

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP FEATURES Digitally/pin-programmable gain G = 1, 2, 4, 8, 16, 32, 64, or 128 Specified from 55 C to +125 C 5 nv/ C maximum input offset

More information

Octal Channel Protectors ADG467

Octal Channel Protectors ADG467 Octal Channel Protectors ADG467 FEATURES Fault and overvoltage protection up to ±40 V Signal paths open circuit with power off Signal path resistance of RON with power on 44 V supply maximum ratings Low

More information

ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches

ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches ADG918/ FEATURES Wideband switch: 3 db @ 4 GHz Absorptive/reflective switches High off isolation (43 db @ 1 GHz) Low

More information

Programmable Low Voltage 1:10 LVDS Clock Driver ADN4670

Programmable Low Voltage 1:10 LVDS Clock Driver ADN4670 Data Sheet Programmable Low Voltage 1:10 LVDS Clock Driver FEATURES FUNCTIONAL BLOCK DIAGRAM Low output skew

More information

Rail-to-Rail, High Output Current Amplifier AD8397

Rail-to-Rail, High Output Current Amplifier AD8397 Rail-to-Rail, High Output Current Amplifier FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails High linear

More information

Fault Protection and Detection, 10 Ω RON, Dual SPDT Switch ADG5436F

Fault Protection and Detection, 10 Ω RON, Dual SPDT Switch ADG5436F FEATURES Overvoltage protection up to 55 V and +55 V Power-off protection up to 55 V and +55 V Overvoltage detection on source pins Interrupt flags indicate fault status Low on resistance: 1 Ω (typical)

More information

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers G48, G49 8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers ESCRIPTION The G48 is an 8 channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined

More information

Octal, 16-Bit DAC with 5 ppm/ C On-Chip Reference in 14-Lead TSSOP AD5668-EP

Octal, 16-Bit DAC with 5 ppm/ C On-Chip Reference in 14-Lead TSSOP AD5668-EP Data Sheet Octal, -Bit with 5 ppm/ C On-Chip Reference in -Lead TSSOP FEATURES Enhanced product features Supports defense and aerospace applications (AQEC) Military temperature range ( 55 C to +5 C) Controlled

More information

DATASHEET DG408, DG409. Features. Applications. Ordering Information. Single 8-Channel/Differential 4-Channel, CMOS Analog Multiplexers

DATASHEET DG408, DG409. Features. Applications. Ordering Information. Single 8-Channel/Differential 4-Channel, CMOS Analog Multiplexers ATASHEET G48, G49 Single 8-Channel/ifferential 4-Channel, CMOS Analog Multiplexers FN3283 Rev 8. The G48 Single 8-Channel, and G49 ifferential 4-Channel monolithic CMOS analog multiplexers are drop-in

More information

Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084

Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084 Low Cost JFET Input Operational Amplifiers ADTL/ADTL FEATURES TL/TL compatible Low input bias current: pa maximum Offset voltage 5.5 mv maximum (ADTLA/ADTLA) 9 mv maximum (ADTLJ/ADTLJ) ±5 V operation Low

More information

0.8% Accurate Quad Voltage Monitor ADM1184

0.8% Accurate Quad Voltage Monitor ADM1184 .8% Accurate Quad Voltage Monitor ADM1184 FEATURES Powered from 2.7 V to 5.5 V on the VCC pin Monitors 4 supplies via.8% accurate comparators 4 inputs can be programmed to monitor different voltage levels

More information

Precision 8-Channel/Dual 4-Channel CMOS Analog Multiplexers

Precision 8-Channel/Dual 4-Channel CMOS Analog Multiplexers G508B, G509B Precision 8-Channel/ual 4-Channel CMOS Analog Multiplexers ESCRIPTION The G508B is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as

More information

ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT FEATURES FUNCTIONAL BLOCK DIAGRAMS APPLICATIONS

ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT FEATURES FUNCTIONAL BLOCK DIAGRAMS APPLICATIONS Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT ADG918/ FEATURES Wideband switch: 3 db @ 4 GHz Absorptive/reflective switches High off isolation (43 db @ 1 GHz) Low insertion

More information

10-Channel Gamma Buffer with VCOM Driver ADD8710

10-Channel Gamma Buffer with VCOM Driver ADD8710 1-Channel Gamma Buffer with VCOM Driver ADD871 FEATURES Single-supply operation: 4.5 V to 18 V Upper/lower buffers swing to VS/GND Gamma continuous output current: >1 ma VCOM peak output current: 25 ma

More information

16-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 28-Lead TSSOP AD7490-EP

16-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 28-Lead TSSOP AD7490-EP Enhanced Product FEATURES Fast throughput rate: 1 MSPS Specified for VDD of 4.75 V to 5.25 V Low power at maximum throughput rates 12.5 mw maximum at 1 MSPS with 5 V supplies 16 (single-ended) inputs with

More information

Dual Processor Supervisors with Watchdog ADM13305

Dual Processor Supervisors with Watchdog ADM13305 Dual Processor Supervisors with Watchdog ADM335 FEATURES Dual supervisory circuits Supply voltage range of 2.7 V to 5.5 V Pretrimmed threshold options:.8 V, 2.5 V, 3.3 V, and 5 V Adjustable.6 V voltage

More information

Current Output/Serial Input, 16-Bit DAC AD5543-EP

Current Output/Serial Input, 16-Bit DAC AD5543-EP Data Sheet Current Output/Serial Input, 16-Bit DAC FEATURES FUNCTIONAL BLOCK DIAGRAM 1/+2 LSB DNL ±3 LSB INL Low noise: 12 nv/ Hz Low power: IDD = 1 μa.5 μs settling time 4Q multiplying reference input

More information

3 V LVDS Quad CMOS Differential Line Driver ADN4667

3 V LVDS Quad CMOS Differential Line Driver ADN4667 FEATURES ±15 kv ESD protection on output pins 400 Mbps (200 MHz) switching rates Flow through pinout simplifies PCB layout 300 ps typical differential skew 400 ps maximum differential skew 1.7 ns maximum

More information

AD MHz, 20 V/μs, G = 1, 10, 100, 1000 i CMOS Programmable Gain Instrumentation Amplifier. Preliminary Technical Data FEATURES

AD MHz, 20 V/μs, G = 1, 10, 100, 1000 i CMOS Programmable Gain Instrumentation Amplifier. Preliminary Technical Data FEATURES Preliminary Technical Data 0 MHz, 20 V/μs, G =, 0, 00, 000 i CMOS Programmable Gain Instrumentation Amplifier FEATURES Small package: 0-lead MSOP Programmable gains:, 0, 00, 000 Digital or pin-programmable

More information

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660 CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or

More information

15 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP

15 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP 5 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +25 C) Controlled manufacturing baseline

More information

Triple Processor Supervisors ADM13307

Triple Processor Supervisors ADM13307 Triple Processor Supervisors ADM337 FEATURES Triple supervisory circuits Supply voltage range of 2. V to 5.5 V Pretrimmed threshold options:.8 V, 2.5 V, 3.3 V, and 5 V Adjustable.6 V and.25 V voltage references

More information

800 MHz, 4:1 Analog Multiplexer ADV3221/ADV3222

800 MHz, 4:1 Analog Multiplexer ADV3221/ADV3222 8 MHz, : Analog Multiplexer ADV/ADV FEATURES Excellent ac performance db bandwidth 8 MHz ( mv p-p) 7 MHz ( V p-p) Slew rate: V/μs Low power: 7 mw, VS = ± V Excellent video performance MHz,. db gain flatness.%

More information

TABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... 2 Specifications... 3 Absolute Maximum

TABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... 2 Specifications... 3 Absolute Maximum FEATURES Offset voltage: 2.5 mv maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nv/ Hz Wide bandwidth: 24 MHz Slew rate: V/μs Short-circuit output current: 2 ma No phase reversal Low input

More information

Wideband 2.5 GHz, 37 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T ADG904

Wideband 2.5 GHz, 37 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T ADG904 Wideband 2.5 GHz, 37 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 4:1 Mux/SP4T FEATURES Wideband switch: 3 db @ 2.5 GHz : absorptive 4:1 mux/sp4t -R: reflective 4:1 mux/sp4t High off isolation (37 db

More information