back to index Definition Compact, lightweight, highfrequency

Size: px

Start display at page:

Download "back to index Definition Compact, lightweight, highfrequency"

Reynold Cannon
6 years ago
Views:

1 MASTER 165 W 55 W Universal 85 W Definition Compact, lightweight, highfrequency system for fluorescent induction lamps. Description Ultra-long life up to 15 years based on 4 burning hours / year Low energy consumption Constant light, independent of mains voltage fluctuations Automatic stop circuit is activated within 5 seconds in case of lamp failure (safety stop) Flicker-free start, ideal for areas with high switching frequency Applications Typical areas of application include: Indoor general lighting Suitable for use with infrared remote control systems Outdoor lighting Special areas like tunnels, signs, cleanrooms, obstruction, and explosion-proof applications Philips quality This implies optimum quality regarding: Ultra-long life. As manufacturer of lamps and HF generator, Philips ensures that, from the earliest development stage, optimum lamp/ HF generator performance is maintained. International standards. Philips systems comply with all relevant international rules and regulations. Compliances and approvals RFI < 3 MHz EN 5515 RFI > 3 MHz EN 5522 Harmonics EN Immunity EN Safety EN 6928 Performance EN 6929 Vibration & bump tests IEC Fc IEC Eb Quality standards: ISO 91 Enviroental standard ISO 141 Approval marks: Burning position A CE marking A 13 B C B x l x w = 15 x 13 L = 4 Type A B 55W W A = Lamp B = Power coupler C = HF generator Note: The lamp system is constructed to give designers maximum freedom for positioning the different system components.this limits the use of the system to luminaires which have provisions for additional cooling and which comply with the international Electro Magnetic Compatibility (EMC) standards. Disregarding this regulation can lead to damage of the lamp system, and unwanted interference with the enviroent. Indicated test house approvals are valid for entire system.these approvals simplify the procedure of obtaining approvals for the total luminaire system. 5 l x w = 19 x 112 L = 4 A booklet, Philips Lamp Systems - Information for Original Equipment Manufacturers, gives detailed guidance for developing appropriate luminaire designs. 165 W Dimensions in mm 159

2 MASTER system System Lamp Power Efficacy Lumen* Colour Average Lumen rendering luminance maintenance index 6.hrs W lm/w lm cd/cm 2 % 55W 23V or 12V W 23V or 12V W 2V /23V /277V Note: * Typical values for /827, /83 and /84 Technical data for installation Mains operation 23 V Rated mains voltage V With tolerances for safety V Tolerances for performance V Mains frequency 5 / 6 Hz Operating frequency 2.65 MHz Power factor >.96 DC voltage operation Required battery voltage for guaranteed ignition V DC Nominal light output is obtained at DC voltage of V DC Overvoltage protection Constant light operation 48 hrs at 32 V AC 2 hrs at 35 V AC Mains operation 12 V Rated mains voltage 12 V With tolerances for safety 14 V Tolerances for performance V Mains frequency 5 / 6 Hz Operation frequency 2.65 MHz Power factor >.96 in case of mains voltage fluctuations within V, the luminous flux changes by a maximum of ± 2 % DC voltage operation Required battery voltage for guaranteed ignition V DC Nominal light output is obtained at DC voltage of 12 V DC Overvoltage protection Constant light operation 2 hrs at 2 V AC in case of mains voltage fluctuations within V, the luminous flux change by a maximum of ± 2 % Technical data for design and mounting system in fixtures Temperatures Min. ambient ignition temperature of lamp -2 C T case +65 C 6. Hrs (failure rate 1 %) Max.T case +75 C Hum and noise level inaudible Permitted humidity is tested according to IEC 928 par.12. Note that no moisture or condensation may enter the ballast. Approvals system 55W S/3 85W S/3 55W S/13 85W S/13 165W S/1 Typical voltage and current values for system Inrush current 1/2 value time at typical mains impedance V nom I max / τ 55W S/3 23V 45A / 35µs 85W S/3 23V 45A / 35µs 165W S/1 23V 45A / 5µs 55W S/13 12V 25A / 55µs 85W S/13 12V 25A / 55µs l max Current supply τ 5% S/3 S/1 S/13 55W 85W 165W 55W 85W 26 ma 4 ma 7 ma 46 ma 71 ma µsec. 165 W system also applicable on 2, 23 and 277 V General Earth leakage current Ignition time Insulation resistance test 16 <.5 ma per system <.5 s 5 V DC from Line/Neutral to earth (not between Line and Neutral). Note: Ensure that the Neutral is reconnected again after the above test is carried out and before the installation is put into operation. Performance during start up Typical luminous flux 1 Time in sec.

3 MASTER Survivals in % Life expectancy curves low heat dissipation high heat dissipation Operating hours ( C) ( F) ambient temperature Effects of ambient temperature on luminous flux ( 55 and 85 W), for different luminaire types and heat dissipation Lumen in % Lumen maintainance Operating hours Temperature dependence for a closed street luminaire inclusive the recommended heat sink T ambient (ºC) The above 165 W curve has been measured using a heat sink with surface area of 4 cm 2. Use of smaller heat sink will result in the curve shifting to the left whereas the use of larger heat sinks will result in the curve shifting to the right. Ordering and packing data Commercial Type Bulk packing name Qty. Dimensions Volume Weight EAN code EOC l x w x h Gross cm m 3 kg Lamp MASTER 55W/827 27K 6 41 x 29.5 x MASTER 55W/83 3K 6 41 x 29.5 x MASTER 55W/84 4K 6 41 x 29.5 x MASTER 85W/827 27K 6 41 x 29.5 x MASTER 85W/83 3K 6 41 x 29.5 x MASTER 85W/84 4K 6 41 x 29.5 x MASTER 165W/83 3K x 34 x MASTER 165W/84 4K x 34 x Power coupler MASTER 55W/PC x 25 x MASTER 85W/PC x 25 x MASTER 165W/PC x 25 x HF generator MASTER 55W S/ V ac 6 35 x 17 x MASTER 85W S/ V ac 6 35 x 17 x MASTER 165W S/ V ac x 25 x MASTER 55W S/ V ac 6 35 x 17 x MASTER 85W S/ V ac 6 35 x 17 x

4 MASTER Φ [µw/(5 - lm)] W/827 Φ [µw/(5 - lm)] W/ Φ [µw/(5 - lm)] W/83 Φ [µw/(5 - lm)] W/ Φ [µw/(5 - lm)] W/84 Φ [µw/(5 - lm)] W/ Φ [µw/(5 - lm)] W/83 Φ [µw/(5 - lm)] W/ Spectral power distributions 162

MASTER 55W 55W 85W 85W C-27 C-18 C-27 C-18 C-27 C-18 C-27 C-18 γ=18 γ=18 γ=18 γ=18 C- γ=9 γ= C-9 C- γ=9 γ= C-9 C- γ=9 γ= C-9 C- γ=9 γ= C-9 (cd/ lm) 15 18 15 (cd/ lm) 21 18 15 (cd/ lm) 15 18 15 (cd/

5 MASTER 55W 55W 85W 85W C-27 C-18 C-27 C-18 C-27 C-18 C-27 C-18 γ=18 γ=18 γ=18 γ=18 C- γ=9 γ= C-9 C- γ=9 γ= C-9 C- γ=9 γ= C-9 C- γ=9 γ= C-9 (cd/ lm) (cd/ lm) (cd/ lm) (cd/ lm) cd cd cd cd C= + C=18 γ = 9 C= + C=18 γ = 9 C=9 + C=27 C=9 + C=27 165W 165W C-27 C-18 C-27 C-18 γ=18 γ=18 C- γ=9 γ= C-9 C- γ=9 γ= C-9 (cd/ lm) (cd/ lm) cd cd C= + C=18 C=9 + C=27 γ = 9 Polar light distributions 163

BASIC T5 Short Emergency Lighting

osram.com BASIC T5 Short Emergency Lighting Versatile solutions for emergency lighting applications Basic T5 EL Basic T5 EL QT-ECO TECHNICAL INFORMATION 01 Benefits Suitable for emergency power operation