N - CHANNEL 100V mω - 180A - ISOTOP POWER MOSFET

Transcription

1 STE180N10 N - CHANNEL 100V mω - 180A - ISOTOP POWER MOSFET TYPE V DSS R DS(on) I D STE180N V < 7 mω 180 A TYPICAL RDS(on) = 5.5 mω 100% AVALANCHE TESTED LOW INTRINSIC CAPACITANCE GATE CHARGE MINIMIZED REDUCED VOLTAGE SPREAD INDUSTRIAL APPLICATIONS: SMPS & UPS MOTOR CONTROL WELDING EQUIPMENT OUTPUT STAGE FOR PWM, ULTRASONIC CIRCUITS ISOTOP INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V DS Drain-source Voltage (V GS = 0) 100 V V DGR Drain- gate Voltage (R GS =20kΩ) 100 V V GS Gate-source Voltage ± 20 V I D Drain Current (continuous) at T c =25 o C 180 A ID Drain Current (continuous) at Tc =100 o C 119 A I DM ( ) Drain Current (pulsed) 540 A P tot Total Dissipation at T c =25 o C 450 W Derating Factor 3.6 W/ o C VISO Iulation Withstand Voltage (AC-RMS) 2500 V T stg Storage Temperature -55 to 150 T j Max. Operating Junction Temperature 150 ( ) Pulse width limited by safe operating area ( 1) ISD 180 Α, di/dτ 200 A/µs, VDD V(BR)DSS, Tj TJMAX February 1999 o C o C 1/8

2 THERMAL DATA R thj-case R thc-h Thermal Resistance Case-heatsink With conductive Thermal Resistance Junction-case Max Grease Applied Max o C/W o C/W AVALANCHE CHARACTERISTICS Symbol Parameter Max Value Unit I AR Avalanche Current, Repetitive or Not-Repetitive 60 A (pulse width limited by T j max) E AS Single Pulse Avalanche Energy (starting T j =25 o C, I D =I AR,V DD =25V) 720 mj ELECTRICAL CHARACTERISTICS (Tcase =25 o C unless otherwise specified) OFF Symbol Parameter Test Conditio Min. Typ. Max. Unit V (BR)DSS Drain-source Breakdown Voltage I D =1mA V GS = V I DSS I GSS Zero Gate Voltage Drain Current (V GS =0) Gate-body Leakage Current (VDS =0) V DS =MaxRating V DS =MaxRating T c = 125 o C V GS = ± 20 V ± 400 na µa µa ON ( ) Symbol Parameter Test Conditio Min. Typ. Max. Unit V GS(th) Gate Threshold Voltage V DS =V GS I D = 250 µa V R DS(on) Static Drain-source On Resistance V GS =10V I D =90A mω I D(on) On State Drain Current V DS >I D(on) xr DS(on )max V GS =10V 180 A DYNAMIC Symbol Parameter Test Conditio Min. Typ. Max. Unit g fs ( ) Forward Traconductance V DS >I D(on) xr DS(on )max I D =90A 70 S C iss C oss C rss Input Capacitance Output Capacitance Reverse Trafer Capacitance V DS =25V f=1mhz V GS = nf nf nf 2/8

3 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol Parameter Test Conditio Min. Typ. Max. Unit td(on) t r Q g Q gs Q gd Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD =50V ID=90A R G =4.7 Ω V GS =10V (Resistive Load, see fig. 3) V DD =80V I D =180A V GS = 10 V nc nc nc SWITCHING OFF Symbol Parameter Test Conditio Min. Typ. Max. Unit t d(on) tr t r(voff) t f t c Turn-off Delay Time Fall Time Off-voltage Rise Time Fall Time Cross-over Time V DD =50V I D =90A RG=4.7 Ω VGS =10V (Resistive Load, see fig. 3) V DD =80V I D =180A R G =4.7 Ω V GS =10V (Inductive Load, see fig. 5) SOURCE DRAIN DIODE Symbol Parameter Test Conditio Min. Typ. Max. Unit I SD I SDM ( ) Source-drain Current Source-drain Current (pulsed) V SD ( ) Forward On Voltage I SD = 180 A V GS =0 1.5 V t rr Reverse Recovery I SD = 180 A di/dt = 100 A/µs 250 Time V DD =50V T j = 150 o C Qrr IRRM Reverse Recovery Charge Reverse Recovery Current (see test circuit, fig. 5) µc A A A ( ) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % ( ) Pulse width limited by safe operating area Safe Operating Area Thermal Impedance 3/8

4 Output Characteristics Trafer Characteristics Traconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variatio 4/8

5 Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Source-drain Diode Forward Characteristics 5/8

6 Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/8

7 ISOTOP MECHANICAL DATA DIM. mm inch MIN. TYP. MAX. MIN. TYP. MAX. A B C D E F G H J K L M N O G A O B N H D E F J K L M C 7/8

8 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no respoibility for the coequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licee is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics 1999 STMicroelectronics Printed in Italy All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 8/8

9 This datasheet has been download from: Datasheets for electronics components.