HS-1 Hi-End audio amplifier. The first HS-class 1000WRMS

Transcription

1 HS-1 Hi-End audio amplifier The first HS-class 1000WRMS

2 The dynamics of music If music is art and the source is its chest, then a good amplifier constitutes along with speakers the mean which allows us to enjoy the feelings and the message of the artist with best vividness. It is a gold chain of different elements, and if just one of these has poor dynamics we will have a low quality result, even if all the others are valid: Often the amplifiers themselves limit sound quality in an important way, mortifying all the resources spent for the rest of the audio system. The high dynamics of HS-1 allow the listener to fully enjoy the best sources and to valorize the speakers with any sound level and musical genre: Tape dynamics: MP3 dynamics : Vinyl dynamics: CD dynamics: HS-1 dynamics: 60dB 50-90dB 75dB 96dB 120dB (with the best of materials) (depends on compression rate) (theoretical, with new disc) (only good quality players) (in every condition)

3 Quality made in Italy HS-1 is entirely designed, built and tested in Italy, with the best components on the market. In its small dimensions find place hundreds of pieces which would have otherwise needed a very large cabinet using dated technologies. An original project: the new Hi-End class type HS To achieve an Hi-End result the signal conditioning should be as less complex as possible, in order to avoid some unwanted consequences on tracks with a high density of information, such as: non existing audio components (intermodulation), loud signals hiding weak ones (blocking) or undesired effects due to certain frequency ratios (resonances). Distortion has many faces, and often shows itself in case of numerous tracks (i.e. classical music, choirs, live sessions, electronic or symphonic music). Because of this, sometimes, a good analog system is preferred to a modest digital one: so that complexity won't degenerate into chaos. HS-1 sounds like a tube-type A class, but without its limitations. Signal path, peak behavior and fluidity make the listening a pleasing and never tiering experience, for consecutive hours of pure audiophile pleasure.

4 The quadrature of the disc HS-1 is born to make you listen to music. No need for gigantic rigs to achieve high quality in audio performances. From 0 to 1000W Hi-Fi...in less than 33RPM! The amplifier smaller than a vinyl that will make your LPs, CDs and DVDs great, and your favorite sources, too. The beneficiary is a lover of music, to whom we dedicate this "black-gold" of velvety but very powerful sound, which required hundreds of hours of testing. The greatness of HS-1 is not in its measures and weight, consumption or heat. It lies in the granitic and precise construction; in the meticolouse calibration aimed at making the listener satisfied (rather than the instruments); in an aesthetics that fits nicely in any environment, be it a luxury lounge or sedan. With discrection and elegance, as only high quality objects do. The design: essential, original, elegant

5 The right image To obtain an adequate sound image it is necessary to have a final stage with the authority to drive the speakers without suffering their impedance ripple. If the global response is not well calibrated and capable of high currents, as in the case of an excessive output resistance (typical of some old tube or solid state amplifiers), then fluctuation and loss of control may occur, resulting in loud sounds disturbing delicate ones and in a loss of amplitude and localization of the scene. The Damping Factor (DF) along with the step response summarize the phenomena above, and indicate how well the amplifier performs when matched with speakers. If the damping factor is below 50, woofers and crossovers may induce ringing resulting in an imprecise, rough and opaque sound: Step response for a mixed reactive load Blue: input; Yellow: HS-1 output; Purple: low DF amplifier HS-1 is capable to carry to the output up to 20A, to drive the speakers in a fast and precise way, without which there can be no sound spacing nor definition. Thanks to a sophisticated output stage, overall noise is also much lower.

6 Sound stands on mechanics To eliminate any vibration and give the maximum mechanical solidity, the case has been extracted from the whole of an aluminium block. CAD-CAM design, minimum thickness is 12mm Precision machining from a whole piece

7 Characteristics monobloc case of anticorodal aluminium obtained from the whole pure copper, high density multilayer circuitry with oxidation protection balanced inputs for professional sources, adaptable for standard audio jack anti vibration and anti slip feet (removable for frame mounting) elegantly painted, translucent GOLD-BLACK case (other colors on demand) finely lighted push-buttons for power on and output level (100% or 50%) colored multistate display for operating state and sound level 1, 2, 3 or 4 channels (1kW total, M, S, T, Q versions) for multivia or surround separate continue current supply, for maximum audio purity possibility of installation on vehicles (compatible with 12-24V systems) Detail of controls and indicators level on/off display

8 Professional connectivity The inputs are balanced, to be connected to professional sources or preamplifiers. XLR-PinJack adapters for standard audio connection are supplied with the unit. The outputs consist of modern SpeakOn, able to transfer over 2kW on 4 channels. Power supply requires any DC source, battery or adapter with voltage between 10V-30V range (not necessary stabilized), provided that the current be adequate, but the efficiency is so high that HS-1 is capable to work with less than 1A, allowing low volume listening even if powered with a solar panel or consumer batteries. The choice of DC supply presents great advantages (as do some of the first-rate amplifiers in the world), blocking the transmission of interferences coming from electric motors or appliance, making the installation cleaner because the absence of AC cables near the signal ones decouples the audio paths from noise. Moreover there is no risk of electric shocks, and mounting takes up the minimum amount of space. HS-1 is protected against: supply polarity inversion (Reverse Polarity) too low supply voltage (Under Voltage) too high supply voltage (Over Voltage) too low speaker impedance too high input levels too high temperatures internal fail (Over Load) (Over Driving) (Over Temp) (Speaker Saving)

9 Technical specification HS-1/S (stereo) Working class: HS (analog, digitally controlled) Bandwidth: 10Hz-20kHz (±0,5dB, linear phase response) Dynamic range: 120dB Distortion: 0,01% (THD+N, 1kHz, 150WRMS, 8Ohm) Input impedance: 20kOhm (balanced or unbalanced input) Power supply: 10-30Vcc 1100Wmax (also not stabilized) Damping factor: > 200 (at maximum load impedance) Load impedance: 1,5-16Ohm (module, reactive load) Power output: 2x 200WRMS, 2x 400WPP (8Ohm load) 2x 400WRMS, 2x 800WPP (4Ohm load) 2x 500WRMS, 2x 1000WPP ( 3Ohm load) The power output can be halved with the level button, for any load impedance Size and weight: 20x20x10cm (WxDxH), 4kg