BE96-V BE96-A BE96-HZ. AC Voltmeters (moving iron) ~A

Transcription

1 ELECMIT PANEL METER BE9V BE9A BE9HZ AC Voltmeters (moving iron) ~V Item: BE9V BE72V : 30,, 75, 0, 0, 1, 0, 2, 300, 00, 5, 00V For 00KV meters use potential transformer with secondary voltage 0V DC Voltmeters (moving coil) V Item: BE9V BE72V : 0.1,0.3,0.5,,15,,30,,75,0, 1,2,2,300,0,0,00V rated voltage over 00V use external resistor (rated Current 5mA) AC Voltmeters (moving iron) ~A Item: BE9A BE72A : 0.1, 0.5, 1, 1.5,, 7.5,, 15,, 25, 30,, 0, 75, 0A For 75AKA, Use external current transformer, which secondary current is 5A. Note: For 0A, 75A, 0A meters, when these meters direct connect circuit their assfuracy are class 2.5 /5, 15/5, 25/5, 30/5, /5, 0/5, 75/5, 0/5, /5, 0/5,2/5, 00/5, 00/5, 00/5, 00/5, 10/5, 00/5, 20/5, 000/5, 000/5. DC Voltmeters (moving coil) A Item: BE9A BE72A : 1, 3, 5,, 15,, 30,, 75, 0, 1, 0, 2, 300, 0mA 1, 3, 5, 735,,, 30,, 0, 0, 1, 2, 00, 00A For 0AKA use external 75mV shunt. Frequency Meters (rectifier) ~Hz Item: BE9HZ BE72HZ Accuracy class: 2.5 voltage: 1, 2, 30, 0V frequency: ~Hz, ~5Hz, ~5Hz, ~0Hz, ~0Hz BE9VHZ BE9KW Frequency Meters (Vibrating reed) ~Hz Item: BE9VHZ BE72VHZ voltage: 1, 2, 30, 0V frequency: ~Hz, ~5Hz, ~5Hz, 7~53Hz, 57~3Hz Power Factor Meters (electronic) 3~1ECOS Item: BE9PF BE72PF Accuracy class: 2.5 (ELECTRICAL) voltage: 1, 2, 30, 0V frequency: ~0Hz COS: LEAD0.5~1~LAG0.5 test voltage: 2kV, ~0Hz Single Phase Power Meters (electronic) ~W Item: BE9W Accuracy class: 2.5 voltage: 1, 2, 30, 0V current: 5A test voltage: 2kV, ~0Hz These meters are used with potential transformer or current transformer, which secondary voltage is 1V secondary current is 5A.

2 SWITCHBOARD METER BE9B MaximumDemand Meter The thermal/time characteristic of MDIs monitors the most economic use of cable and transformers. The directly heated bimetal element indicates mean r.i.s current over, 15 or mins. A red slave pointer shows highest value reached and has a wire sealable reset knob. The optional saturating C.T. limits the power into the MDI and is used where a protection relay is connected in series from the same C.T. Scales are calibrated to match the C.T. plus % overload (e.g. 05A). Accuracy: Class 3.0 Ratings: 5A for use with sparate C.T. 5/5 A saturating C.T. Burdens: /0 Hz MDI2.5VA, CT 1VA Overload withstand Standard: 5*FL for 5 sec *FL for 1 sec With saturating C.T.: 0*FL for 3 sec *FL for 1 sec Frequency: /0 Hz WIDE ANGLE SCALE INSTRUMENT BE9W PANEL CUTOUT BE9 A/V: Measuring Ranges: Moving Coil Type: 0 A30A, DC 30V300V DC Rectifier Type: 1V00V AC, 1A5A AC For ranges higher than 30A DC, use external Multiplier with a mv DC Ammeter. For ranges higher than 300V DC, use external Multiplier with a 1 ma Voltmeter. For ranges higher than 5A AC, use external Current Transformer with a 5A AC Ammeter. For ranges higher than 00V AC, use external Potential Transformer with a 1V AC Voltmeter. BE9W KW: 1V, 2V, 30V, 0V. 1A, 5A. For any rating other listed above, use external Current Transformer and/or external Potential Transformer with a 1V/5A instrument. BE9W COS : 1V, 2V, 30V, 0V. 1A, 5A. For any rating other listed above, use external Potential Transformer with a 1V/5A instrument. BE9W Hz: 1V, 2V, 30V, 0V For a voltage rating higher than above, use an external Potential Transformer with a 1V instrument. Accuracy: BE9W A / V Class 1.5 BE9W kw Class 1.5 BE9W COS in phase angle. BE9W HzClass 1.5 Full scale deflection: 2 Composition: Glass window, ABS Resin frame and case. PC glass fiber base mounting fittings included. Colour: Black base and frame, white scale plate and meter body. Pointer: Stick shape in black colour. K BE BE9B BE9W BE

3 ELECMIT PANEL METER BO5/52 PANEL CUTOUT ITEM NO. A B C D E F G H K L BO5 BO BO52P PANEL CUTOUT : (Accuracy: class 2.5) ITEM NO. Moving Iron Type Moving Coil Type BO5 BO52 BO52P maa AC 1V0V AC ma30a AC 1V0V AC maa AC 1V300V AC AA DC 1V00V DC Case and composition: Glass window and Bakelite case for BO5, BO52. Three Stud mounting. Acrylic Resin front and Bakelite case for BO52P. Two Stud mounting. Colour: Black case, white scale plate. Pointer: Tube or knif type, colour in black or red. BP0/0/5/0/3 PANEL CUTOUT BP0 BP0 BP5 BP0 BP Measuring Range: Moving Coil Type: AA DC Accuracy: class 1.5 class 2.5 Moving Iron Type: maa AC 1V0V AC Accuracy: class 2.5 Rectifier Type: 3V0V AC Accuracy: class 2.5 BP 0S/0S/0A// PANEL CUTOUT BP0S BP0S BP0A BP BP Measuring Range: Moving Coil Type: AA DC Accuracy: class 1.5 class 2.5 Moving Iron Type: maa AC 1V0V AC Accuracy: class 2.5 Rectifier Type: 3V0V AC Accuracy: class 2.5 K L M

4 SHUNT BEA~0A K L M BEA/0mV ~ BE1A/0mV BE0A/0mV BE0A~00A ITEM NO. A B C BE0A/0mV 32 9 D 9 E BE2A/0mV 1 BE300A/0mV 3 BE00A/0mV 9 BE0A/0mV BE00A/0mV 2 BE00A~00A ITEM NO. A B C D E F G BE00A/0mV 2 35 BE00A/0mV BE10A/0mV BE00A/0mV BE3000A~00A ITEM NO. A B C D E F G H I BE3000A/0mV BE000A/0mV BE00A/0mV

5 CURRENT TRANSFORMER The series of current transformers can be applied to test, control, display and record the running of the electrical equipment, and to protect the equipment against the damage, in the AC circuit with the rated voltage value below 0V and the frequency of 0Hz. The product can be also applied to form a complete set of mine transformer. The product conforms to IEC A/5 2T 0A/5 0A/5 MFO30CT 1A/5 0A/5 2A/5 300A/5 MFO0CT 00A/5 0A/5 00A/5 MFO0CT 00A/5 MFO0CT 00A/5 00A/5 10A/5 A/5 00A/5 20A/5 3000A/5 9