SAW Bandpass Filter F4521

Size: px
Start display at page:

Download "SAW Bandpass Filter F4521"

Transcription

1 Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant Package Dimensions.80±0..00±0..90± ±0.0.80±0. ITF A 6.0± ±0.0 Dimensions shown are nominal in millimeters Body : Al O Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0. ~.0 um, Over a.7 ~ 8.89 um Ni Plating Pin Configurations Input Output,,, 6 Case ground Maximum Ratings Parameters Unit Minimum Typical Maximum Operating Temperature Range C 0 8 Storage Temperature Range C 0 8 Power Handling Capability dbm 0 Electrostatics Sensitive Device (ESD) F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7

2 Specifications Minimum Typical Maximum Unit Center Frequency ( Fc ). MHz Insertion Loss (In Fc +/. MHz).0.8 db Amplitude Ripple (In Fc +/. MHz) 0.8. db VSWR (In Fc +/. MHz)..0 Relative Attenuation 0. MHz ~ 7. MHz 7. MHz ~. MHz 60.0 MHz ~ 6.0 MHz 0 0 db 6.0 MHz ~ 700 MHz 700 MHz ~ 000 MHz 7 0 Temperature Range (Operational) 0 8 Input RF Power (In Fc +/. MHz) 0 dbm Input/Output Impedance 0 Ohms Notes : ) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full port calibration. ) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances ) All attenuation measurements are measured relative to insertion loss F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7

3 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 0Ω Output 0Ω Marking Configuration ) ITF ) ) A ) ) Pad Number Index ) Manufacturer name ) Marking Number ) Lot Number * Ink or Laser Marking available F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7

4 Typical Performance ( at ) CH S log MAG 0 db/ REF 0 db Oct 00 :8:7 _:.706 db MHz _:. db 0 MHz _:.889 db MHz _:8. db 60 MHz _:6.87 db 6 MHz CH CENTER MHz SPAN MHz CH S log MAG db/ REF 0 db Oct 00 6::7 _:.6 db MHz mean:.8 7 db REF= s.dev:.967 db pp:.660 db CH CENTER MHz SPAN MHz F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7

5 Input / Output VSWR Charts CH S SWR / REF Oct 00 6:0:6 _:.6 CH S SWR / REF Oct 00 6:0:9 _: MHz MHz _:.7 0 MHz _:.8 0 MHz _:.67 MHz _:.0989 MHz _:.0 60 MHz _:.8 60 MHz _: MHz _: MHz CH CENTER MHz SPAN MHz CH CENTER MHz SPAN MHz Input / Output Smith Charts CH S U FS Oct 00 ::0 _: pf CH S U FS Oct 00 ::8 _: pf MHz MHz _: MHz _: MHz _: m MHz _: MHz _: MHz _: MHz _: MHz _: MHz CH CENTER MHz SPAN MHz CH CENTER MHz SPAN MHz F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 /7

6 Packing Specification. Reeling Quantity : 000 pcs / reel ( or 000 pcs / 7 reel ). Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification. Leader part and vacant position specification Vacant 0mm min. Component contained Vacant 0mm min. Leader part 0mm min. END START Tape Running Direction. Tensile strength of carrier tape.n/mm width Direction of pull. Top cover tape adhesion ) pull off angle : 0~ ) speed : 00mm/min ) force : 0~70g Top cover tape Carrier tape 0~ degree F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 6/7

7 Carrier Tape Dimensions [unit : mm] A.0 ± 0. B.0 ± 0. C 7. ± 0. D.70 ± 0. E.00 ± 0. F 8.00 ± 0. Part Direction Tape Running Direction Reel Dimensions [unit : mm] F 090, Bucheon Technopark 6, Rev. Date GyounggiDo, Korea 809 Rev. NR06AS0 7/7

SAW Bandpass Filter F2G12

SAW Bandpass Filter F2G12 SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation

More information

Pin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm

Pin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm Features For WiBro and WiMAX applications Usable bandwidth 10 MHz High attenuation operation 200 Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb 6 MHz SAW Filter Package

More information

Pin Configuration. Surface Mount 1.40 x 1.20 x 0.46 mm

Pin Configuration. Surface Mount 1.40 x 1.20 x 0.46 mm Features For Satellite Radio Applications Usable Bandwidth 5 MHz Low Loss Good Selectivity Ceramic Chip Scale Package (CSP) Singleended Input,, 100Ω or 200Ω Hermetic RoHS compliant (2002/95/EC), Pbfree

More information

Pin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C

Pin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C Features For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb Package Surface

More information

Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf

Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC

More information

Pin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B

Pin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B Features For broadband applications Typical 3 bandwidth of 4.9 MHz High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851551 (BW 3=4.5 MHz) Hermetic RoHS compliant

More information

Pin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B

Pin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B Features For broadband applications Typical 3 bandwidth of 65 High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851948 (BW 3=64 ) Hermetic RoHS compliant (2002/95/EC),

More information

MHz SAW Filter

MHz SAW Filter Applications Smart metering Remote meter reading wireless modules Licensed band wireless General purpose wireless Product Features Usable bandwidth 15 MHz Low loss Dimensions: 3.80 x 3.80 x 1.27 mm Singleended

More information

1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C

1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25

More information

SAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C

SAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C SAW BANDPASS FILTER ACT PART NO.: ACTF9201_2535MHz_DCC6C Product Type: SAW Filter Part NO.: Customer: Customer Part NO.: ACTF9201_2535MHz_DCC6C Issued Date: PREPARED BY CHECKED BY APPROVED BY Features

More information

MHz SAW Filter

MHz SAW Filter Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard Band 1 Uplink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block Diagram 60 MHz

More information

Vectron International Filter specification TFS 243E 1/5

Vectron International Filter specification TFS 243E 1/5 Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics

More information

Preliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units

Preliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband

More information

MHz SAW Filter

MHz SAW Filter Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard UMTS Bands 1 and 10 Downlink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block

More information

MHz SAW Filter

MHz SAW Filter Applications General Purpose For IF applications Product Features Typical 3 db bandwidth of 18.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:

More information

/881.5 MHz SAW Duplexer

/881.5 MHz SAW Duplexer Applications General purpose wireless Femtocells Repeaters Data cards and dongles Product Features Usable bandwidth 25 MHz No matching required for operation at Ω Excellent rejection for Bluetooth and

More information

Vectron International Filter specification TFS 125P 1/5

Vectron International Filter specification TFS 125P 1/5 Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics

More information

Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler

Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It

More information

Model BD1722J50100A00

Model BD1722J50100A00 Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation

More information

Vectron International Filter specification TFS140AV 1/5

Vectron International Filter specification TFS140AV 1/5 Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics

More information

VI TELEFILTER Filter specification TFS 130C 1/5

VI TELEFILTER Filter specification TFS 130C 1/5 VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics

More information

Model BD1631J50100AHF

Model BD1631J50100AHF Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output

More information

Vectron International Filter specification TFS 1632A 1/5

Vectron International Filter specification TFS 1632A 1/5 Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics

More information

TQQ MHz LTE Band 7 Uplink BAW Filter

TQQ MHz LTE Band 7 Uplink BAW Filter Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 70 MHz Bandwidth High Attenuation Low Loss

More information

Model BD3238N5050AHF. Ultra Low Profile 0404 Balun

Model BD3238N5050AHF. Ultra Low Profile 0404 Balun Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and

More information

Vectron International Filter specification TFS 400P 1/5

Vectron International Filter specification TFS 400P 1/5 Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics

More information

Vectron International Filter specification TFS246R 1/5

Vectron International Filter specification TFS246R 1/5 Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics

More information

Vectron International Filter specification TFS180L 1/5

Vectron International Filter specification TFS180L 1/5 Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49

More information

TQQ MHz LTE Band 7 Uplink BAW Filter

TQQ MHz LTE Band 7 Uplink BAW Filter Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features 70 MHz Bandwidth High Attenuation Low Loss 50 Ohm Input/Output Impedance

More information

MHz SAW Filter

MHz SAW Filter Applications General Purpose For IF applications Product Features Typical 1 db Bandwidth of 1.2 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:

More information

Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C

Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on

More information

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for

More information

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1. Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

VI TELEFILTER Filter specification TFS 70Z 1/5

VI TELEFILTER Filter specification TFS 70Z 1/5 VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics

More information

Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.

Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram. ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The

More information

SPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-69 DATE May 16, 2014 WISOL. Byun,Kyung-Su. User WISOL CO., LTD.

SPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-69 DATE May 16, 2014 WISOL. Byun,Kyung-Su. User WISOL CO., LTD. SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE May 16, 2014 REVISION Preliminary WISOL Kim,Young-Hun Byun,Kyung-Su Choi. Jae hyeong ISSUED BY APPROVED BY (R&D)

More information

Model PD3150J5050S2HF

Model PD3150J5050S2HF Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF

More information

MHz SAW Filter

MHz SAW Filter Applications Base Station Infrastructure LTE Macrocells General Purpose Wireless Product Features SMP28B 7.1 x 5.51 x 1.63 mm Functional Block Diagram Usable bandwidth of 6 MHz Balanced operation High

More information

SAW Components Data Sheet B4926

SAW Components Data Sheet B4926 Features Low-loss IF filter for mobile telephone Channel selection in GSM systems Hermetically sealed ceramic SMD package Balanced and unbalanced operation possible No coupling coil required Terminals

More information

Vectron International Filter specification TFS 600 1/5

Vectron International Filter specification TFS 600 1/5 Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics

More information

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker. Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

Features. = +25 C, Vcc = +5V [1]

Features. = +25 C, Vcc = +5V [1] Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics

More information

MHz BAW Filter

MHz BAW Filter Applications Satellite Radio antenna modules Satellite Radio devices Suitable for Automotive applications Compliant to the AECQ0 Grade 2 reliability standard CSP 1713, 1.7 X 1.3 X 6 mm Product Features

More information

Model C2327J5003AHF Rev D

Model C2327J5003AHF Rev D Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf

More information

Vectron International Filter specification TFS1220 1/5

Vectron International Filter specification TFS1220 1/5 Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics

More information

Vectron International Filter specification TFS455D 1/5

Vectron International Filter specification TFS455D 1/5 Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

TQQ MHz LTE Band 3 Uplink BAW Filter

TQQ MHz LTE Band 3 Uplink BAW Filter Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss

More information

Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler

Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:

More information

Vectron International Filter specification TFS1590 1/5

Vectron International Filter specification TFS1590 1/5 Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Model BD4859L50100A00 Rev A

Model BD4859L50100A00 Rev A Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output

More information

VI TELEFILTER Filter specification TFS 230 1/5

VI TELEFILTER Filter specification TFS 230 1/5 VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3

More information

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:

More information

Vectron International Filter specification TFS1575AG 1/5

Vectron International Filter specification TFS1575AG 1/5 Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:

More information

Model PD0409J7575S2HF

Model PD0409J7575S2HF Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is

More information

VI TELEFILTER Filter specification TFS 248F 1/5

VI TELEFILTER Filter specification TFS 248F 1/5 VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference

More information

VI TELEFILTER Filter Specification TFS 211 C 1/5

VI TELEFILTER Filter Specification TFS 211 C 1/5 Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω

More information

Model PD0409J5050S2HF

Model PD0409J5050S2HF Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for

More information

Vectron International Filter specification TFS 281 1/5

Vectron International Filter specification TFS 281 1/5 Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics

More information

Vectron International Filter specification TFS1255A 1/5

Vectron International Filter specification TFS1255A 1/5 Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

Model PD2328J5050S2HF

Model PD2328J5050S2HF Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF

More information

Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced

Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics

More information

Data Sheet. ACFF-1025 LTE Band 41 Bandpass Filter. Features. Description. Specifications. Functional Block Diagram. Applications

Data Sheet. ACFF-1025 LTE Band 41 Bandpass Filter. Features. Description. Specifications. Functional Block Diagram. Applications ACFF-125 LTE Band 41 Bandpass Filter Data Sheet Description The Avago ACFF-125 is a highly miniaturized LTE Band 41 (2496 269 MHz) bandpass filter combined with a WLAN/Wi-Fi band reject filter. The ACFF-125

More information

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:

More information

Vectron International Filter specification TFS 1227A 1/5

Vectron International Filter specification TFS 1227A 1/5 Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics

More information

A 2.4 GHz WLAN/BTLTE Co-Existence Filter

A 2.4 GHz WLAN/BTLTE Co-Existence Filter Applications Automotive Telematics and Infotainment 2.4 GHz ISM Applications & Smart Energy WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TD-LTE & WiFi signals WLAN systems (Higher power

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum

More information

Vectron International Filter specification TFS 500 1/5

Vectron International Filter specification TFS 500 1/5 Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External

More information

Vectron International Filter specification TFS 1575AA 1/5

Vectron International Filter specification TFS 1575AA 1/5 Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location

Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile

More information

Vectron International Filter specification TFS 868P 1/5

Vectron International Filter specification TFS 868P 1/5 Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics

More information

VI TELEFILTER Preliminary specification TFS 1575N 1/5

VI TELEFILTER Preliminary specification TFS 1575N 1/5 VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

VI TELEFILTER Filter Specification TFS 246 H4 1/5

VI TELEFILTER Filter Specification TFS 246 H4 1/5 Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh

More information

GHz BAW Filter

GHz BAW Filter Applications WiFi/ ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS,

More information

GHz WLAN/BT LTE Co-Existence Filter

GHz WLAN/BT LTE Co-Existence Filter Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject

More information

Vectron International Filter specification TFS 522 1/5

Vectron International Filter specification TFS 522 1/5 Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS 867A 1/5

Vectron International Filter specification TFS 867A 1/5 Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data

More information

Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram

Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data

More information

Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.

Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port. Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output

More information

Preliminary Datasheet

Preliminary Datasheet Device Features This can be operated at Vd of 3.0V N.F = 0.78 db @ 1850MHz at Demo board 31.5 dbm Output IP3 at 0dBm/tone at 1850MHz 15.6 db Gain at 1850MHz 17.7 dbm P1dB at 1850 MHz Lead-free/Green/RoHS

More information

PART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz

PART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators

More information

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth

More information

TELEFILTER Filter Specification TFS 141 C 1/5

TELEFILTER Filter Specification TFS 141 C 1/5 TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics

More information

DATASHEET. It needs tuning process for customer s device. AMOTECH

DATASHEET. It needs tuning process for customer s device. AMOTECH Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure

More information

VI TELEFILTER Filter Specification TFS 70U - 1/5

VI TELEFILTER Filter Specification TFS 70U - 1/5 Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics

More information

Vectron International Filter specification TFS 942G 1/5

Vectron International Filter specification TFS 942G 1/5 Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

GHz WLAN/BT LTE Co-Existence Filter

GHz WLAN/BT LTE Co-Existence Filter Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TDLTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters Highpower WLAN Access Points Applicable reject

More information

Vectron International Filter specification TFS 737 1/5

Vectron International Filter specification TFS 737 1/5 Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

SAW Components Data Sheet B3750

SAW Components Data Sheet B3750 Features Ceramic package QCC8C RF low-loss filter for remote control receivers Package for Surface Mounted Technology (SMT) Balanced and unbalanced operation possible Passivation layer: Protec Terminals

More information

Vectron International Filter specification TFS 121 1/5

Vectron International Filter specification TFS 121 1/5 Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics

More information

Data Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E

More information

TQQ1013 Band 13 SAW Duplexer

TQQ1013 Band 13 SAW Duplexer Applications LTE Handsets, Data Cards & Mobile Routers Band 13 777 787 MHz Uplink 746 756 MHz Downlink 8 Pin 2.5 x 2.0 mm Package Product Features NoDrift SAW Technology With Near Zero TCF Low Insertion

More information

Data Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications

Data Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications ACMD-765 Miniature UMTS Band 8 Duplexer Data Sheet Description The Avago Technologies ACMD-765 is a miniature duplexer designed for use in UMTS Band 8 (88 915 MHz UL, 925 96 MHz DL) handsets and mobile

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information