R&S ZN-Zxxx Calibration Units Specifications. Data Sheet V04.00
|
|
|
- Ruby Wilkinson
- 5 years ago
- Views:
Transcription
1 R&S ZN-Zxxx Calibration Units Specifications Data Sheet V04.00
2 Version 03.00, January 2019 CONTENTS Definitions... 4 Specifications... 6 Model description R&S ZN-Z5x... 6 Model description R&S ZN-Z15x... 7 Input power limits... 7 Effective system data... 8 Effective system data of the R&S ZN-Z50 (model.30)... 8 Effective system data of the R&S ZN-Z50 (model.32)... 9 Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z53 (model.32) Effective system data of the R&S ZN-Z53 (model.72) Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z151, R&S ZN-Z152, R&S ZN-Z Rohde & Schwarz R&S ZN-Z5x Calibration Units
3 Effective system data of the R&S ZN-Z Effective system data of the R&S ZN-Z General data Dimensions and weight Ordering information R&S ZN-Z5x R&S ZN-Z15x Port options for the R&S ZN-Z51 calibration unit Accredited calibration Service options Rohde & Schwarz R&S ZN-Zxxx Calibration Units 3
4 Definitions General Product data applies under the following conditions: Three hours storage at ambient temperature followed by 30 minutes warm-up operation Specified environmental conditions met Recommended calibration interval adhered to All internal automatic adjustments performed, if applicable Specifications with limits Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked with limiting symbols such as <,, >,, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if applicable. 4 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
5 Specifications without limits Represent warranted product performance for the specified parameter. These specifications are not specially marked and represent values with no or negligible deviations from the given value (e.g. dimensions or resolution of a setting parameter). Compliance is ensured by design. Typical data (typ.) Characterizes product performance by means of representative information for the given parameter. When marked with <, > or as a range, it represents the performance met by approximately 80 % of the instruments at production time. Otherwise, it represents the mean value. Nominal values (nom.) Characterize product performance by means of a representative value for the given parameter (e.g. nominal impedance). In contrast to typical data, a statistical evaluation does not take place and the parameter is not tested during production. Measured values (meas.) Characterize expected product performance by means of measurement results gained from individual samples. Uncertainties Represent limits of measurement uncertainty for a given measurand. Uncertainty is defined with a coverage factor of 2 and has been calculated in line with the rules of the Guide to the Expression of Uncertainty in Measurement (GUM), taking into account environmental conditions, aging, wear and tear. Device settings and GUI parameters are indicated as follows: parameter: value. Typical data as well as nominal and measured values are not warranted by Rohde & Schwarz. In line with the 3GPP/3GPP2 standard, chip rates are specified in Mcps (million chips per second), whereas bit rates and symbol rates are specified in Gbps (billion bits per second), Mbps (million bits per second), kbps (thousand bits per second), Msps (million symbols per second) or ksps (thousand symbols per second), and sample rates are specified in Msample/s (million samples per second). Gbps, Mcps, Mbps, Msps, kbps, ksps and Msample/s are not SI units. Rohde & Schwarz R&S ZN-Zxxx Calibration Units 5
6 Specifications Impedance 50 Ω Model description R&S ZN-Z5x Type Model Connector Number of ports Frequency range R&S ZN-Z mm, female 2 9 khz to 9 GHz khz to 26.5 GHz R&S ZN-Z mm, female khz to 8.5 GHz type N, female R&S ZN-Z mm, female khz to 26.5 GHz R&S ZN-Z mm, female khz to 26.5 GHz.72 type N, female khz to 18 GHz R&S ZN-Z mm, female 2 9 khz to 40 GHz, characterized up to 43.5 GHz R&S ZN-Z mm, female 2 9 khz to 50 GHz 6 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
7 Model description R&S ZN-Z15x Type Model Connector Number of ports Frequency range R&S ZN-Z type N, female 2 5 khz to 6 GHz R&S ZN-Z type N, female khz to 8.5 GHz.32 SMA, female 2 R&S ZN-Z R&S ZN-Z R&S ZN-Z154 6 to 24 R&S ZN-Z mm, female 2 5 GHz to 67 GHz Input power limits Nominal input level range R&S ZN-Z50/-Z54/-Z55 45 dbm to +20 dbm R&S ZN-Z51/-Z52/-Z53 45 dbm to +20 dbm R&S ZN-Z150/-Z151/-Z152/-Z153/-Z dbm to +10 dbm R&S ZN-Z dbm to +10 dbm Damage level R&S ZN-Z50/-Z54/-Z dbm R&S ZN-Z51/-Z52/-Z dbm R&S ZN-Z150/-Z151/-Z152/-Z153/-Z154 R&S ZN-Z156 Damage DC voltage R&S ZN-Z50/-Z54/-Z55 0 V R&S ZN-Z51/-Z52/-Z53 12 V R&S ZN-Z150/-Z151/-Z152/-Z153/-Z154 R&S ZN-Z156 Rohde & Schwarz R&S ZN-Zxxx Calibration Units 7
8 Effective system data Effective system data of the R&S ZN-Z50 (model.30) This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 9 khz to 100 khz > 40 db > 42 db 100 khz to 2 GHz > 44 db > 45 db 2 GHz to 6 GHz > 41 db > 43 db 6 GHz to 9 GHz > 41 db > 43 db Source match and load match 9 khz to 100 khz > 36 db > 38 db 100 khz to 2 GHz > 42 db > 43 db 2 GHz to 6 GHz > 39 db > 40 db 6 GHz to 9 GHz > 38 db > 39 db Reflection tracking and transmission tracking 9 khz to 100 khz < 0.10 db < 0.08 db 100 khz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 6 GHz < 0.07 db < 0.06 db 6 GHz to 9 GHz < 0.07 db < 0.06 db 1 At +23 C. 8 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
9 Effective system data of the R&S ZN-Z50 (model.32) This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 9 khz to 100 khz > 40 db > 42 db 100 khz to 2 GHz > 44 db > 45 db 2 GHz to 6 GHz > 41 db > 43 db 6 GHz to 10 GHz > 41 db > 43 db 10 GHz to 20 GHz > 39 db > 41 db 20 GHz to 26.5 GHz > 37 db > 39 db Source match and load match 9 khz to 100 khz > 36 db > 38 db 100 khz to 2 GHz > 42 db > 43 db 2 GHz to 6 GHz > 39 db > 40 db 6 GHz to 10 GHz > 38 db > 39 db 10 GHz to 20 GHz > 36 db > 37 db 20 GHz to 26.5 GHz > 34 db > 36 db Reflection tracking and transmission tracking 9 khz to 100 khz < 0.10 db < 0.08 db 100 khz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 6 GHz < 0.07 db < 0.06 db 6 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 20 GHz < 0.09 db < 0.08 db 20 GHz to 26.5 GHz < 0.12 db < 0.10 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 9
10 Effective system data of the R&S ZN-Z51 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 2 Specification 3 Directivity 100 khz to 10 MHz > 40 db 42 db > 40 db 10 MHz to 4 GHz > 46 db 46 db > 40 db 4 GHz to 8.5 GHz > 40 db 42 db > 36 db Source match 100 khz to 10 MHz > 34 db 38 db > 34 db 10 MHz to 4 GHz > 40 db 40 db > 36 db 4 GHz to 8.5 GHz > 36 db 38 db > 30 db Load match 100 khz to 10 MHz > 40 db 42 db > 40 db 10 MHz to 4 GHz > 46 db 46 db > 36 db 4 GHz to 8.5 GHz > 40 db 42 db > 32 db Reflection tracking and transmission tracking 100 khz to 10 MHz < 0.1 db 0.08 db < 0.1 db 10 MHz to 4 GHz < 0.04 db 0.04 db < 0.06 db 4 GHz to 8.5 GHz < 0.1 db 0.08 db < 0.12 db 2 At +23 C. 3 With optional port connectors (see Port options for the R&S ZN-Z51 calibration unit on page 25). 10 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
11 Effective system data of the R&S ZN-Z52 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 100 khz to 1 MHz > 40 db > 42 db 1 MHz to 2 GHz > 44 db > 45 db 2 GHz to 6 GHz > 41 db > 43 db 6 GHz to 10 GHz > 41 db > 43 db 10 GHz to 20 GHz > 39 db > 41 db 20 GHz to 26.5 GHz > 37 db > 39 db Source match and load match 100 khz to 1 MHz > 38 db > 40 db 1 MHz to 2 GHz > 42 db > 43 db 2 GHz to 6 GHz > 39 db > 40 db 6 GHz to 10 GHz > 37 db > 38 db 10 GHz to 20 GHz > 35 db > 36 db 20 GHz to 26.5 GHz > 33 db > 35 db Reflection tracking and transmission tracking 100 khz to 1 MHz < 0.10 db < 0.08 db 1 MHz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 6 GHz < 0.07 db < 0.06 db 6 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 20 GHz < 0.09 db < 0.08 db 20 GHz to 26.5 GHz < 0.12 db < 0.10 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 11
12 Effective system data of the R&S ZN-Z53 (model.32) This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 100 khz to 1 MHz > 40 db > 42 db 1 MHz to 2 GHz > 44 db > 45 db 2 GHz to 6 GHz > 41 db > 43 db 6 GHz to 10 GHz > 41 db > 43 db 10 GHz to 20 GHz > 39 db > 41 db 20 GHz to 26.5 GHz > 37 db > 39 db Source match and load match 100 khz to 1 MHz > 38 db > 40 db 1 MHz to 2 GHz > 42 db > 43 db 2 GHz to 6 GHz > 39 db > 40 db 6 GHz to 10 GHz > 37 db > 38 db 10 GHz to 20 GHz > 35 db > 36 db 20 GHz to 26.5 GHz > 33 db > 35 db Reflection tracking and transmission tracking 100 khz to 1 MHz < 0.10 db < 0.08 db 1 MHz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 6 GHz < 0.07 db < 0.06 db 6 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 20 GHz < 0.09 db < 0.08 db 20 GHz to 26.5 GHz < 0.12 db < 0.10 db 12 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
13 Effective system data of the R&S ZN-Z53 (model.72) This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 100 khz to 1 MHz > 40 db > 42 db 1 MHz to 2 GHz > 44 db > 45 db 2 GHz to 6 GHz > 41 db > 43 db 6 GHz to 10 GHz > 41 db > 43 db 10 GHz to 18 GHz > 39 db > 41 db Source match and load match 100 khz to 1 MHz > 38 db > 40 db 1 MHz to 2 GHz > 42 db > 43 db 2 GHz to 6 GHz > 39 db > 40 db 6 GHz to 10 GHz > 37 db > 38 db 10 GHz to 18 GHz > 35 db > 36 db Reflection tracking and transmission tracking 100 khz to 1 MHz < 0.10 db < 0.08 db 1 MHz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 6 GHz < 0.07 db < 0.06 db 6 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 18 GHz < 0.09 db < 0.08 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 13
14 Effective system data of the R&S ZN-Z54 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Measured Directivity 9 khz to 100 khz > 40 db > 41 db 100 khz to 2 GHz > 44 db > 45 db 2 GHz to 10 GHz > 40 db > 41 db 10 GHz to 20 GHz > 38 db > 40 db 20 GHz to 30 GHz > 36 db > 38 db 30 GHz to 40 GHz > 34 db > 36 db 40 GHz to 43.5 GHz >34 db Source match and load match 9 khz to 100 khz > 37 db > 39 db 100 khz to 2 GHz > 41 db > 42 db 2 GHz to 10 GHz > 37 db > 38 db 10 GHz to 20 GHz > 34 db > 35 db 20 GHz to 30 GHz > 32 db > 34 db 30 GHz to 40 GHz > 30 db > 32 db 40 GHz to 43.5 GHz > 30 db Reflection tracking and transmission tracking 9 khz to 100 khz < 0.10 db < 0.08 db 100 khz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 20 GHz < 0.09 db < 0.08 db 20 GHz to 30 GHz < 0.12 db < 0.10 db 30 GHz to 40 GHz < 0.15 db < 0.12 db 40 GHz to 43.5 GHz < 0.15 db 14 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
15 Effective system data of the R&S ZN-Z55 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 9 khz to 100 khz > 40 db > 41 db 100 khz to 2 GHz > 44 db > 45 db 2 GHz to 10 GHz > 39 db > 41 db 10 GHz to 20 GHz > 37 db > 39 db 20 GHz to 30 GHz > 35 db > 37 db 30 GHz to 40 GHz > 34 db > 36 db 40 GHz to 50 GHz > 32 db > 34 db Source match and load match 9 khz to 100 khz > 37 db > 40 db 100 khz to 2 GHz > 41 db > 42 db 2 GHz to 10 GHz > 36 db > 38 db 10 GHz to 20 GHz > 34 db > 36 db 20 GHz to 30 GHz > 31 db > 33 db 30 GHz to 40 GHz > 30 db > 32 db 40 GHz to 50 GHz > 27 db > 29 db Reflection tracking and transmission tracking 9 khz to 100 khz < 0.10 db < 0.08 db 100 khz to 2 GHz < 0.05 db < 0.04 db 2 GHz to 10 GHz < 0.07 db < 0.06 db 10 GHz to 20 GHz < 0.09 db < 0.08 db 20 GHz to 30 GHz < 0.12 db < 0.10 db 30 GHz to 40 GHz < 0.15 db < 0.12 db 40 GHz to 50 GHz < 0.20 db < 0.14 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 15
16 Effective system data of the R&S ZN-Z150 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Directivity 5 khz to 1 MHz > 38 db 1 MHz to 3 GHz > 40 db 3 GHz to 6 GHz > 38 db Source match and load match 5 khz to 1 MHz > 36 db 1 MHz to 3 GHz > 38dB 3 GHz to 6 GHz > 36 db Reflection tracking and transmission tracking 5 khz to 1 MHz < 0.18B 1 MHz to 3 GHz < 0.10 db 3 GHz to 6 GHz < 0.14 db 16 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
17 Effective system data of the R&S ZN-Z151, R&S ZN-Z152, R&S ZN-Z153 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Directivity 100 khz to 10 MHz > 38 db 10 MHz to 4 GHz > 40 db 4 GHz to 8.5 GHz > 38 db Source match and load match 100 khz to 10 MHz > 32 db 10 MHz to 4 GHz > 36 db 4 GHz to 8.5 GHz > 32 db Reflection tracking and transmission tracking 100 khz to 10 MHz < 0.20 db 10 MHz to 4 GHz < 0.10 db 4 GHz to 8.5 GHz < 0.2 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 17
18 Effective system data of the R&S ZN-Z154 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Directivity 100 khz to 10 MHz > 38 db 10 MHz to 4 GHz > 40 db 4 GHz to 8.5 GHz > 36 db Source match and load match 100 khz to 10 MHz > 20 db 10 MHz to 4 GHz > 36 db 4 GHz to 8.5 GHz > 32 db Reflection tracking and transmission tracking 100 khz to 10 MHz < 0.20 db 10 MHz to 4 GHz < 0.10 db 4 GHz to 8.5 GHz < 0.20 db 18 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
19 Effective system data of the R&S ZN-Z156 This data is valid at an ambient temperature between +18 C and +28 C, at a measurement bandwidth of 10 Hz, and a nominal power of 10 dbm at the calibration ports. Effective error coefficient Frequency range Specification Typical 1 Directivity 5 GHz to 20 GHz > 36 db 42 db 20 GHz to 40 GHz > 32 db 36 db 40 GHz to 67 GHz > 30 db 34 db Source match and load match 5 GHz to 20 GHz > 34 db 38 db 20 GHz to 40 GHz > 30 db 34 db 40 GHz to 60 GHz > 26 db 32 db 60 GHz to 67 GHz > 26 db 30 db Reflection tracking and transmission tracking 5 GHz to 20 GHz < 0.10 db 0.08 db 20 GHz to 40 GHz < 0.15 db 0.10 db 40 GHz to 60 GHz < 0.20 db 0.12 db 60 GHz to 67 GHz < 0.20 db 0.15 db Rohde & Schwarz R&S ZN-Zxxx Calibration Units 19
20 General data Temperature loading operating temperature range +5 C to +40 C permissible temperature range 0 C to +50 C storage temperature range 40 C to +70 C, in line with IEC and IEC Damp heat +40 C at 85 % rel. humidity Mechanical resistance vibration test, sinusoidal 5 Hz to 55 Hz, displacement: 0.15 mm constant amplitude (1.8 g at 55 Hz); 55 Hz to 150 Hz, acceleration: 0.5 g constant, in line with IEC vibration test, random 10 Hz to 300 Hz, acceleration 1.2 g (RMS), in line with IEC shock test 40 g shock spectrum, in line with MIL-STD-810E method no , procedure I Calibration interval 12 months EMC RF emission in line with CISPR 11/EN group 1 class A (for a shielded test setup); instrument complies with the emission requirements stipulated by EN and EN class A making the instrument suitable for use in industrial environments immunity in line with EMC Directive EC2014/30/EU, including IEC/EN (immunity test requirement for industrial environment, EN table 2) 20 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
21 Safety Power supply Power consumption in line with IEC EN UL , CSA C22.2 No R&S ZN-Z50/-Z51/-Z52/-Z53/-Z54/-Z55/ via USB, 5 V, 450 ma, max. 500 ma -Z152/-Z153 R&S ZN-Z150/-Z151 via USB, 5 V, 300 ma R&S ZN-Z V to 240 V (AC) ± 10 %, 50 Hz to 60 Hz/400 Hz ± 5 %, safety class I to VDE 411 R&S ZN-Z156 via USB, 5 V, 220 ma R&S ZN-Z50/-Z51/-Z52/-Z53/-Z54/-Z55/ 2.3 W -Z152/-Z153 R&S ZN-Z150/-Z W R&S ZN-Z VA R&S ZN-Z W Rohde & Schwarz R&S ZN-Zxxx Calibration Units 21
22 Dimensions and weight Designation Dimensions (W H D) Weight Shipping weight R&S ZN-Z5x 118 mm 35 mm 125 mm 1 kg (2.2 lb) 3 kg (6.61 lb) (4.65 in 1.38 in 4.92 in) R&S ZN-Z150 and R&S ZN-Z151 model mm 34 mm 142 mm 900 g (1.98 lb) 2 kg (4.41 lb) (4.88 in 1.34 in 5.59 in) R&S ZN-Z151 model mm 37 mm 112 mm 780 g (1.63 lb) 1.9 kg (4.19 lb) (4.88 in 1.46 in 4.41 in) R&S ZN-Z mm 38 mm 167 mm 1.4 kg (3.09 lb) 2.5 kg (5.5 lb) (6.89 in 1.50 in 6.57 in) R&S ZN-Z mm 38 mm 125 mm 790 g (1.74 lb) 2 kg (4.4 lb) (4.88 in 1.50 in 4.92 in) R&S ZN-Z mm 88 mm 300 mm 5 kg to 7 kg (11 lb to 15.4 lb) (17.52 in 3.46 in in) R&S ZN-Z mm 28 mm 134 mm (2.01 in 1.10 in 5.28 in) 80 g (0.18 lb) 22 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
23 Ordering information R&S ZN-Z5x Designation Frequency range Type Order No. Calibration unit, 2 ports, 3.5 mm, female 9 khz to 9 GHz R&S ZN-Z Calibration unit, 2 ports, 3.5 mm, female 9 khz to 26.5 GHz Calibration unit, 2 ports, 3.5 mm, female 100 khz to 8.5 GHz R&S ZN-Z Calibration unit, 2 ports, type N, female Calibration unit, 4 ports, 3.5 mm, female Calibration unit, 4 ports, type N, female Calibration unit, 4 ports, 3.5 mm, female 100 khz to 26.5 GHz R&S ZN-Z Calibration unit, 2 ports, 3.5 mm, female 100 khz to 26.5 GHz R&S ZN-Z Calibration unit, 2 ports, type N, female 100 khz to 18 GHz Calibration unit, 2 ports, 2.92 mm, female 9 khz to 40 GHz, R&S ZN-Z characterized up to 43.5 GHz Calibration unit, 2 ports, 2.4 mm, female 9 khz to 50 GHz R&S ZN-Z Rohde & Schwarz R&S ZN-Zxxx Calibration Units 23
24 R&S ZN-Z15x Designation Frequency range Type Order No. Calibration unit, 2 ports, type N, female 5 khz to 6 GHz R&S ZN-Z Calibration unit, 2 ports, type N, female 100 khz to 8.5 GHz R&S ZN-Z Calibration unit, 2 ports, SMA, female Calibration unit, 6 ports, SMA, female R&S ZN-Z Calibration unit, 4 ports, SMA, female R&S ZN-Z Calibration unit, 6 ports, SMA, female 10 MHz to 8.5 GHz R&S ZN-Z Additional ports 7 to 12 for R&S ZN-Z154 R&S ZN-Z154-B Additional ports 13 to 18 for R&S ZN-Z154 R&S ZN-Z154-B Additional ports 19 to 24 for R&S ZN-Z154 R&S ZN-Z154-B Calibration unit, 2 ports, 1.85 mm, female 5 GHz to 67 GHz R&S ZN-Z Rohde & Schwarz R&S ZN-Zxxx Calibration Units
25 Port options for the R&S ZN-Z51 calibration unit Designation Type Order No. Connector port mm, female 4 R&S ZNZ51-B Connector port 2 R&S ZNZ51-B Connector port 3 R&S ZNZ51-B Connector port 4 R&S ZNZ51-B Connector port mm, male 4 R&S ZNZ51-B Connector port 2 R&S ZNZ51-B Connector port 3 R&S ZNZ51-B Connector port 4 R&S ZNZ51-B Connector port 1 type N, male 4 R&S ZNZ51-B Connector port 2 R&S ZNZ51-B Connector port 3 R&S ZNZ51-B Connector port 4 R&S ZNZ51-B Connector port 1 7/16, female 4 R&S ZNZ51-B Connector port 2 R&S ZNZ51-B Connector port 3 R&S ZNZ51-B Connector port 4 R&S ZNZ51-B Connector port 1 7/16, male 4 R&S ZNZ51-B Connector port 2 R&S ZNZ51-B Connector port 3 R&S ZNZ51-B Connector port 4 R&S ZNZ51-B Adapters are only available for the.72/.74 models. Only one option per port is possible as the adapters are not removable to assure accurate calibration results. The upper frequency limit of the ports with 7 /16 adapters is limited to 7.5 GHz. Rohde & Schwarz R&S ZN-Zxxx Calibration Units 25
26 Connector port female 4 R&S ZNZ51 B Connector port 2 R&S ZNZ51 B Connector port 3 R&S ZNZ51 B Connector port 4 R&S ZNZ51 B Rohde & Schwarz R&S ZN-Zxxx Calibration Units
27 Accredited calibration Accredited calibration Type Order No. DAKKS calibration for R&S ZN-Z50 R&S ZNZ50-ACA R&S ZN-Z51 R&S ZNZ4-DAKKS R&S ZN-Z52 R&S ZNZ52-ACA R&S ZN-Z53 R&S ZNZ53-ACA R&S ZN-Z54 R&S ZNZ54-ACA R&S ZN-Z55 R&S ZNZ55-ACA R&S ZN-Z150 R&S ZNZ150-ACA R&S ZN-Z151 R&S ZNZ2-DAKKS R&S ZN-Z152 R&S ZNZ152-ACA R&S ZN-Z153 R&S ZNZ153-ACA R&S ZN-Z154 R&S ZNZ154-ACA Rohde & Schwarz R&S ZN-Zxxx Calibration Units 27
28 Service options Service options Extended warranty, one year R&S WE1 Please contact your local Extended warranty, two years R&S WE2 Rohde & Schwarz sales Extended warranty, three years R&S WE3 office. Extended warranty, four years R&S WE4 Extended warranty with calibration coverage, one year R&S CW1 Extended warranty with calibration coverage, two years R&S CW2 Extended warranty with calibration coverage, three years R&S CW3 Extended warranty with calibration coverage, four years R&S CW4 Extended warranty with accredited calibration coverage, one year R&S AW1 Extended warranty with accredited calibration coverage, two years R&S AW2 Extended warranty with accredited calibration coverage, three years R&S AW3 Extended warranty with accredited calibration coverage, four years R&S AW4 Extended warranty with a term of one to four years (WE1 to WE4) Repairs carried out during the contract term are free of charge 5. Necessary calibration and adjustments carried out during repairs are also covered. Extended warranty with calibration (CW1 to CW4) Enhance your extended warranty by adding calibration coverage at a package price. This package ensures that your Rohde & Schwarz product is regularly calibrated, inspected and maintained during the term of the contract. It includes all repairs 5 and calibration at the recommended intervals as well as any calibration carried out during repairs or option upgrades. 5 Excluding defects caused by incorrect operation or handling and force majeure. Wear-and-tear parts are not included. 28 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
29 Extended warranty with accredited calibration (AW1 to AW4) Enhance your extended warranty by adding accredited calibration coverage at a package price. This package ensures that your Rohde & Schwarz product is regularly calibrated under accreditation, inspected and maintained during the term of the contract. It includes all repairs 5 and accredited calibration at the recommended intervals as well as any accredited calibration carried out during repairs or option upgrades. Rohde & Schwarz R&S ZN-Zxxx Calibration Units 29
30 30 Rohde & Schwarz R&S ZN-Zxxx Calibration Units
31 Rohde & Schwarz R&S ZN-Zxxx Calibration Units 31
32 Service that adds value Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability Sustainable product design Environmental compatibility and eco-footprint Energy efficiency and low emissions Longevity and optimized total cost of ownership Certified Quality Management ISO 9001 Certified Environmental Management ISO Rohde & Schwarz GmbH & Co. KG Regional contact Europe, Africa, Middle East North America TEST RSA ( ) customer.support@rsa.rohde-schwarz.com Latin America customersupport.la@rohde-schwarz.com Asia Pacific customersupport.asia@rohde-schwarz.com China customersupport.china@rohde-schwarz.com R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners PD Version January 2019 (as) R&S ZN-Zxxx Calibration Units Data without tolerance limits is not binding Subject to change Rohde & Schwarz GmbH & Co. KG Munich, Germany PDP 1 en
R&S ZN-Z5x Calibration Units Specifications. Data Sheet V03.00
R&S ZN-Z5x Calibration Units Specifications Data Sheet V03.00 CONTENTS Definitions... 4 Specifications... 6 Model description R&S ZN-Z5x... 6 Model description R&S ZN-Z15x... 7 Input power limits... 7
R&S RSC Step Attenuator Specifications
R&S RSC Step Attenuator Specifications Data Sheet Version 05.00 CONTENTS Definitions... 3 Specifications... 4 Step attenuator, 139 db, 1 db steps, DC to 6 GHz (models.03 and.13)... 4 Step attenuator, 139.9
R&S ZV-Z5x Calibration Units Specifications
R&S ZV-Z5x Calibration Units Specifications Test & Measurement Data Sheet 10.00 Specifications apply under the following conditions: Sufficient warm-up time (approx. 15 minutes) at ambient temperature,
R&S ZV-Z3xx T-Checker Specifications
ZV-Z3xx_dat-sw_en_3607-0575-22_cover.indd 1 Data Sheet 01.00 Test & Measurement R&S ZV-Z3xx T-Checker Specifications 17.06.2014 15:14:20 CONTENTS Definitions... 3 Specifications... 4 Measurement range...
R&S ZNC Vector Network Analyzer Specifications
ZNC3_dat-sw_en_5214-5610-22_v0300_cover.indd 1 Data Sheet 03.00 Test & Measurement R&S ZNC Vector Network Analyzer Specifications 04.09.2012 13:39:47 CONTENTS Definitions... 3 Measurement range... 4 Measurement
R&S ZV-Z5x Calibration Units Specifications
R&S ZV-Z5x Calibration Units Specifications Test & Measurement Data Sheet 09.01 Specifications apply under the following conditions: Sufficient warm-up time (approx. 15 minutes) at ambient temperature,
R&S ZNBT8 Vector Network Analyzer Specifications
E stablished 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) ZNBT8_dat-sw_en_3606-9727-22_v0200_cover.indd 1 Data Sheet 02.00 Test & Measurement R&S ZNBT8 Vector Network Analyzer
R&S ZVT Vector Network Analyzer Specifications
ZVT_dat-sw_en_0758-065-22_v0900_cover.indd Data Sheet 09.00 Test & Measurement R&S ZVT Vector Network Analyzer Specifications 06.03.205 5:50:4 CONTENTS Definitions... 3 Specifications... 4 Measurement
R&S ZNB Vector Network Analyzer Specifications
Umschlag_ZNB4-8_dat-sw_en_5214-5384-22.indd 1 Data Sheet 02.00 Test & Measurement R&S ZNB Vector Network Analyzer Specifications 07.11.2011 10:03:35 CONTENTS Definitions... 3 Measurement range... 4 Measurement
R&S ZVT Vector Network Analyzer Specifications
R&S ZVT Vector Network Analyzer Specifications Test & Measurement Data Sheet 08.00 CONTENTS Definitions... 3 Specifications... 4 Measurement range...4 Measurement speed...5 Measurement accuracy...6 Effective
R&S ZV-Z135 Calibration Kit Specifications
R&S ZV-Z135 Calibration Kit Specifications Test & Measurement Data Sheet 01.01 CONTENTS Definitions... 3 Specifications... 4 Mechanical data... 4 Electrical data of R&S ZV-Z135 (3.5 mm, female)... 4 Electrical
R&S FS-K112PC NFC Measurement Software Specifications
FS_K112-PC_dat-sw_3606-7047-22_cover.indd 1 Data Sheet 03.00 Test & Measurement R&S FS-K112PC NFC Measurement Software Specifications 06.10.2014 18:19:15 CONTENTS Definitions... 3 Specifications... 4 Minimum
Noise Figure Measurement Applications Specifications
Noise Figure Measurement Applications Specifications R&S FSW-K30 R&S FSWP-K30 R&S FPS-K30 R&S FSV-K30 R&S FPL1-K30 Data Sheet Version 02.02 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4
R&S FSC Spectrum Analyzer Specifications
R&S FSC Spectrum Analyzer Specifications year Data Sheet Version 03.00 CONTENTS Base unit... 3 Frequency... 3 Sweep time... 3 Bandwidths... 3 Level... 4 Trigger functions... 5 Tracking generator (model.13/.16
Analog Modulation Analysis (AM/FM/φM) Specifications
Analog Modulation Analysis (AM/FM/φM) Specifications R&S FSW-K7 R&S ESW-K7 R&S FSWP-K7 R&S FSV-K7 R&S FSL-K7 R&S FPS-K7 R&S FPL1-K7 R&S VSE-K7 Data Sheet Version 06.00 CONTENTS Definitions... 3 Specifications...
Vector Network Analyzers ZVB
Specifications Version 05.00 Vector Network Analyzers ZVB September 2005 Specifications MEASUREMENT RANGE...3 MEASUREMENT SPEED...5 MEASUREMENT ACCURACY...6 EFFECTIVE SYSTEM DATA...8 TEST PORT OUTPUT...8
R&S EB500 Monitoring Receiver Specifications
Radiomonitoring & Radiolocation Data Sheet 01.02 R&S EB500 Monitoring Receiver Specifications CONTENTS Definitions... 3 Specifications... 4 Frequency...4 Linearity...4 Interference rejection...4 Noise
R&S FPC Spectrum Analyzer Specifications
R&S FPC Spectrum Analyzer Specifications year Data Sheet Version 04.00 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Sweep time... 4 Bandwidth... 4 Level... 5 Trigger functions... 6 Tracking
Data Sheet Version R&S RT-ZVCxx Multi-Channel Power Probe Specifications
Data Sheet Version 05.01 R&S RT-ZVCxx Multi-Channel Power Probe Specifications CONTENTS Definitions... 3 Probe characteristics... 4 Voltmeter of the R&S RT-ZVC02/02A/04/04A... 4 Amperemeter of the R&S
R&S ZNA Vector Network Analyzer Specifications
R&S ZNA Vector Network Analyzer Specifications Data Sheet Version 01.02 year ZNA_dat-sw_en_5215-4652-22_v0102_cover.indd 1 07.01.2019 12:23:03 Version 01.02 January 2019 CONTENTS Definitions... 3 Measurement
R&S ZVL Vector Network Analyzer Specifications
R&S ZVL Vector Network Analyzer Specifications Data Sheet Version 10.00 CONTENTS Definitions... 3 Specifications... 4 Measurement range... 4 Measurement speed... 4 Measurement accuracy... 5 Effective system
R&S CBT/R&S CBT32 Bluetooth Tester Specifications
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) R&S CBT/R&S CBT32 Bluetooth Tester Specifications Test & Measurement Data Sheet 06.00 CONTENTS Unit specifications...
R&S ZVA-Zxx Millimeter-Wave Converters Network analysis up to 500 GHz
ZVA-Zxx_bro_en_5214-2033-12.indd 1 Product Brochure 06.02 Test & Measurement R&S ZVA-Zxx Millimeter-Wave Converters Network analysis up to 500 GHz 28.10.2014 21:05:04 R&S ZVA-Zxx Millimeter-Wave Converters
Attenuators and Matching Pads, Terminations 75 mw to 1000 W, DC to 18 GHz
Product Brochure Version 8. Attenuators and Matching Pads, Terminations 75 mw to W, DC to 8 GHz Attenuators_dat-bunt_en_758-96_3_v8.indd 3.3.7 7:33:39 Attenuators As a rule, the reflection coefficient
R&S FU129 Antenna Filter Unit Antenna switching, rotator control and signal attenuation, amplification and filtering
Radiomonitoring & Radiolocation Product Brochure 02.01 R&S FU129 Antenna Filter Unit Antenna switching, rotator control and signal attenuation, amplification and filtering R&S FU129 Antenna Filter Unit
R&S NRP Power Meter Family Specifications
R&S NRP Power Meter Family Specifications year Data Sheet Version 06.00 CONTENTS Definitions... 3 Overview of the R&S NRP power sensors... 4 Specifications in brief of the R&S NRP power sensors... 5 Multipath
R&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs
R&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs Test & Measurement Data Sheet 03.00 R&S ENV216 Two-Line V-Network At a glance The R&S ENV216 two-line V-network meets
R&S NRP-Zxx Power Sensors Specifications
R&S NRP-Zxx Power Sensors Specifications year Data Sheet Version 11.00 CONTENTS Definitions... 3 Overview of the R&S NRP-Zxx power sensors... 4 Specifications in brief of the R&S NRP-Zxx power sensors...
Guide Version Five techniques for fast, accurate power integrity measurements
Guide Version 01.00 Five techniques for fast, accurate power integrity measurements Rail voltages are getting smaller, and tolerances are decreasing. As a result, making accurate power rail measurements
R&S ESCI/ESCI7 EMI Test Receiver Specifications
R&S ESCI/ESCI7 EMI Test Receiver Specifications Test & Measurement Data Sheet 03.00 Specifications Specifications apply under the following conditions: 15 minutes warm-up time at ambient temperature, specified
R&S SMC100A Signal Generator Specifications
R&S SMC100A Signal Generator Specifications Test & Measurement Data Sheet 01.00 CONTENTS Key features... 3 Specifications... 4 RF characteristics...4 Frequency...4 Frequency sweep...4 Reference frequency...4
R&S NRPM Over-the-Air (OTA) Power Measurement Solution For 5G, WLAN IEEE ad and IEEE ay
year Product Brochure Version 0.00 R&S NRPM Over-the-Air (OTA) Power Measurement Solution For 5G, WLAN IEEE 80.ad and IEEE 80.ay NRPM_bro_en_607-4687-_v000.indd 8.0.09 5:59:08 R&S NRPM Over-the-Air (OTA)
R&S TS8997 Regulatory Test System for Wireless Devices
R&S TS8997 Regulatory Test System for Wireless Devices Product Brochure Version 03.01 ETSI EN 300328 V1.8.1/ETSI EN 301893 V1.7.1 compliance tests in the 2.4/5 GHz band TS8997_bro_en_3606-8095-12_v0301.indd
R&S NRP USB and LAN Power Sensors Specifications
NRP-Family_dat-sw_en_3607-0852-22_v0200_Cover.indd 1 Data Sheet 02.00 Test & Measurement R&S NRP USB and LAN Power Sensors Specifications 01.12.2015 13:55:03 CONTENTS Definitions... 3 Overview of the R&S
R&S FSH4/8 Spectrum Analyzer Specifications
R&S FSH4/8 Spectrum Analyzer Specifications Test & Measurement Data Sheet 02.00 CONTENTS Specifications... 3 Frequency...3 Sweep time...3 Bandwidths...4 Level...4 Trigger functions...5 Inputs and outputs...6
R&S FSWP Phase Noise Analyzer Specifications
FSWP_dat-sw_en_3607-2090-22_v0300_cover.indd 1 Data Sheet 03.00 Test & Measurement R&S FSWP Phase Noise Analyzer Specifications 19.05.2016 10:13:04 CONTENTS Definitions... 3 Specifications... 4 Frequency...
R&S MNT100 RF Interference Locator Specifications
R&S MNT100 RF Interference Locator Specifications Data Sheet Version 02.00 CONTENTS Specifications... 3 RF data... 3 Noise figure, DANL... 3 Phase noise... 3 Sensitivity (demodulation path) with ITU-T
R&S FSWP Phase Noise Analyzer Specifications
R&S FSWP Phase Noise Analyzer Specifications Test & Measurement Data Sheet 02.01 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Phase noise measurements... 4 Phase noise sensitivity with
R&S ESRP EMI Test Receiver Specifications
R&S ESRP EMI Test Receiver Specifications Test & Measurement Data Sheet 01.01 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Preselection and preamplifier (R&S ESRP-B2 option)... 6 RF preamplifier
Spectrum Analyzer FSL
Specifications Version 02.00 Spectrum Analyzer FSL August 2005 Specifications Specifications Specifications apply under the following conditions: 15 minutes warm-up time at ambient temperature, specified
R&S SMB100N SIGNAL GENERATOR
R&S SMB100N SIGNAL GENERATOR PERFORMANCE SPECIFICATIONS VERSION 02.00, SEPTEMBER 2009 CONTENTS Specifications...3 Definitions... 3 RF performance... 4 Frequency... 4 Frequency sweep... 4 Reference frequency...
RF Signal Generator SM300
RF Signal Generator SM300 9 khz to 3 GHz With compliments Helmut Singer Elektronik www.helmut-singer.de info@helmut-singer.de fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany
Data Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
R&S OSP Open Switch and Control Platform Specifications
R&S OSP Open Switch and Control Platform Specifications Data Sheet Version 18.00 CONTENTS Definitions... 4 Introduction... 5 R&S OSP120... 5 R&S OSP130... 5 R&S OSP150... 5 R&S OSP-B200S2... 5 General
Signal Generator SMA 100A
Specifications Version 01.01 Signal Generator SMA 100A April 2006 Specifications CONTENTS CONTENTS... 2 KEY FEATURES... 3 SPECIFICATIONS... 4 RF CHARACTERISTICS... 4 Frequency... 4 Frequency sweep... 4
MDS-21 Absorbing Clamp, EZ-24 Ferrite Clamp
Version 06.00 MDS-21 Absorbing Clamp, EZ-24 Ferrite Clamp July 2007 Measurement of disturbance power and screening effectiveness on cables Reproducible measurements of disturbance field strength and disturbance
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
R&S OSP Open Switch and Control Platform Specifications
R&S OSP Open Switch and Control Platform Specifications Data Sheet Version 15.00 CONTENTS Definitions... 4 Introduction... 5 R&S OSP120... 5 R&S OSP130... 5 R&S OSP150... 5 R&S OSP-B200S2... 5 General
Voltage Sensors URV5-Z
Data sheet Version 05.00 Voltage Sensors URV5-Z May 2005 Universal voltage measurements from RF to microwaves The voltage sensors of the URV5-Z series are indispensable tools in RF and microwave laboratories,
R&S TS-EMF EMF Measurement System Easy, frequency-selective measurement of EMF emissions
TS-EMF_dat_en_0758-2777-12_v0501.indd 1 Product Brochure 05.01 Test & Measurement R&S TS-EMF EMF Measurement System Easy, frequency-selective measurement of EMF emissions 11.04.2016 09:35:59 R&S TS-EMF
Bring satellites into your lab: GNSS simulators from the T&M expert.
Bring satellites into your lab: GNSS simulators from the T&M expert. www.rohde-schwarz.com/gnss-solutions Your challenge GNSS receiver tests can only be conclusive when they are performed under realistic
Complimentary Reference Material
Complimentary Reference Material This PDF has been made available as a complimentary service for you to assist in evaluating this model for your testing requirements. TMG offers a wide range of test equipment
ENY81 Coupling Network
Version 01.00 ENY81 Coupling Network January 2008 For radio disturbance measurements on unshielded, symmetrical telecommunications ports Eight-wire network Radio disturbance measurements in line with CISPR
R&S NRP USB and LAN Power Sensors Specifications
R&S NRP USB and LAN Power Sensors Specifications year warranty Test & Measurement Data Sheet 03.00 CONTENTS Definitions... 3 Overview of the R&S NRP power sensors... 4 Specifications in brief of the R&S
R&S CMU-Z10/-Z11 Antenna Coupler/ RF Shielding Cover Simple interference-free testing of all mobiles
R&S CMU-Z1/-Z11 Antenna Coupler/ RF Shielding Cover Simple interference-free testing of all mobiles Test & Measurement Data Sheet 3. R&S CMU-Z1 /-Z11/-Z1/-Z13/-Z1 At a glance Anyone engaged in mobile phone
R&S FSWP Phase Noise Analyzer Specifications
R&S FSWP Phase Noise Analyzer Specifications Data Sheet Version 06.00 CONTENTS Definitions... 4 Specifications... 5 Frequency... 5 Phase noise measurements... 5 Phase noise sensitivity with R&S FSWP-B61
R&S ZVH Cable and Antenna Analyzer Specifications
Umschlag_ZVH_dat-sw_v0300.indd 1 Data Sheet 03.00 Test & Measurement R&S ZVH Cable and Antenna Analyzer Specifications 18.05.2011 11:30:50 CONTENTS Definitions... 3 Specifications of the R&S ZVH cable
R&S NRPC Calibration Kits Calibration of power sensors
R&S NRPC Calibration Kits Calibration of power sensors Product Brochure Version 03.00 year NRPC_bro_en_5214-6297-12_v0300.indd 1 10.04.2018 10:30:29 R&S NRPC Calibration Kits At a glance The five modular
Spectrum Analyzer R&S FS300
Spectrum Analyzer R&S FS300 9 khz to 3 GHz The new product family from Rohde & Schwarz Professional test equipment for laboratory, service and production The R&S FS300 is a highly accurate spectrum analyzer
R&S ESR EMI Test Receiver Specifications
ESR_dat-sw_en_3606-7201-22_cover.indd 1 Data Sheet 02.00 Test & Measurement R&S ESR EMI Test Receiver Specifications 30.07.2013 16:02:30 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Preselection
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
R&S FSV Signal and Spectrum Analyzer Specifications
R&S FSV Signal and Spectrum Analyzer Specifications Test & Measurement Data Sheet 02.02 CONTENTS Specifications... 3 Frequency...3 Sweep time...4 Resolution bandwidths...4 Level...5 Measurement speed...8
R&S ZVH Cable and Antenna Analyzer Specifications
ZVH_dat-sw_en_5214-4588-22_cover.indd 1 Data Sheet 06.00 Test & Measurement R&S ZVH Cable and Antenna Analyzer Specifications 26.03.2015 15:40:31 CONTENTS Definitions... 3 Specifications... 4 Frequency...
R&S NRT Power Reflection Meter Family R&S NRT2 and R&S NRT-Zxx
R&S NRT Power Reflection Meter Family R&S NRT2 and R&S NRT-Zxx Product Brochure Version 01.00 year NRT_bro_en_5215-0986-12_v0100.indd 1 07.08.2017 10:45:57 R&S NRT Power Reflection Meter Family At a glance
Power Added Efficiency Measurement with R&S ZNB/ R&S ZVA
Power Added Efficiency Measurement with R&S ZNB/ R&S ZVA Application Note Products: R&S ZNB R&S ZVA Power Added Efficiency (PAE) is a key parameter for the characterization of an amplifier. This application
R&S ETH Handheld TV Analyzer Specifications
R&S ETH Handheld TV Analyzer Specifications year Data Sheet Version 11.00 CONTENTS Definitions... 3 Specifications... 4 TV analyzer... 4 Frequency... 4 Level... 4 RF preselection (R&S ETH-K1 option)...
R&S TS-PSAM Analog Source and Measurement Module Scanning multimeter and data acquisition unit
TS-PSAM_bro_en_0758-0580-12.indd 1 Product Brochure 03.00 Test & Measurement R&S TS-PSAM Analog Source and Measurement Module Scanning multimeter and data acquisition unit 12.12.2013 15:34:44 R&S TS-PSAM
R&S UMS175 Compact Radiomonitoring System High performance for outdoor deployment
UMS175_bro_en_3607-1488-12_v0201.indd 1 Product Brochure 02.01 Radiomonitoring & Radiolocation R&S UMS175 Compact Radiomonitoring System High performance for outdoor deployment 11.02.2016 09:50:15 R&S
R&S Spectrum Rider FPH Handheld Spectrum Analyzer Specifications
R&S Spectrum Rider FPH Handheld Spectrum Analyzer Specifications year Data Sheet Version 06.00 CONTENTS Definitions... 3 Frequency... 4 Sweep time... 4 Bandwidths... 4 Level... 5 Trigger functions... 7
R&S ESRP EMI Test Receiver Specifications
R&S ESRP EMI Test Receiver Specifications Test & Measurement Data Sheet 03.00 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Preselection and preamplifier (R&S ESRP-B2 option)... 6 RF preamplifier
HF Transmit/Receive Broadband System XB 2900
Data sheet HF Transmit/Receive Broadband System XB 2900 Especially designed for naval operational environment Full HF frequency band (2 MHz to 30 MHz) for voice, data, and ALE operation Flexible system
Keysight N9310A RF Signal Generator
Keysight N9310A RF Signal Generator 9 khz to 3.0 GHz Data Sheet 02 Keysight N9310A RF Signal Generator - Data Sheet Definitions and Conditions Specifications describe the performance of parameters that
FMU36 Baseband Signal Analyzer
Version 01.00 FMU36 Baseband Signal Analyzer January 2007 Specifications Contents SPECIFICATIONS... 3 FREQUENCY... 3 SWEEP... 3 RESOLUTION BANDWIDTHS... 3 LEVEL... 4 DYNAMIC RANGE... 5 PHASE... 5 PROBE
ESU EMI Test Receiver
Version 02.00 ESU EMI Test Receiver October 2007 Data sheet CONTENTS BASE UNIT...3 FREQUENCY...3 RECEIVER SCAN...4 SWEEP...4 PRESELECTION...4 IF AND RESOLUTION BANDWIDTHS...5 LEVEL...5 I/Q DATA...11 AUDIO
Handheld Spectrum Analyzer R&S FSH khz to 3 GHz
Handheld Spectrum Analyzer R&S FSH3 100 khz to 3 GHz Spectrum analysis anywhere, anytime The R&S FSH3 is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It
R&S FSV Signal Analyzer Specifications
R&S FSV Signal Analyzer Specifications Test & Measurement Data Sheet 01.00 CONTENTS Specifications... 3 Frequency...3 Sweep time...4 Resolution bandwidths...4 Level...5 Measurement speed...7 Trigger functions...8
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz Application Note
Measurement Setup for Phase Noise Test at Frequencies above 50 GHz Application Note Products: R&S FSWP With recent enhancements in semiconductor technology the microwave frequency range beyond 50 GHz becomes
NI PXIe-5601 Specifications
NI PXIe-5601 Specifications RF Downconverter This document lists specifications for the NI PXIe-5601 RF downconverter (NI 5601). Use the NI 5601 with the NI PXIe-5622 IF digitizer and the NI PXI-5652 RF
Signal Generator SML
Signal Generator SML Economy at its best 9 khz to 1.1 GHz/2.2 GHz/3.3 GHz SSB phase noise: < 122 dbc (1 Hz) (at f = 1 GHz, f = 20 khz) Setting times
R&S NRPC Calibration Kits Calibration of power sensors
R&S NRPC Calibration Kits Calibration of power sensors Test & Measurement Product Brochure 02.00 R&S NRPC Calibration Kits At a glance The four modular R&S NRPC calibration kits are used to calibrate power
R&S EM510 HF Digital Wideband Receiver Efficient and versatile solution for radiomonitoring
EM510_bro_en_5213-7731-32_v0200.indd 1 Product Brochure 02.00 Radiomonitoring & Radiolocation R&S EM510 HF Digital Wideband Receiver Efficient and versatile solution for radiomonitoring 27.05.2015 16:01:58
Handheld Spectrum Analyzer R&S FSH3
Handheld Spectrum Analyzer R&S FSH3 100 khz to 3 GHz Fourth Edition July 2003i Spectrum analysis anywhere, anytime The R&S FSH3 is the ideal spectrum analyzer for rapid, high-precision, cost-effective
R&S CLGD DOCSIS Cable Load Generator Multichannel signal generator for DOCSIS 3.1 downstream and upstream
CLGD_bro_en_3607-0123-12_v0200.indd 1 Product Brochure 02.00 Broadcast & Media Test & Measurement R&S CLGD DOCSIS Cable Load Generator Multichannel signal generator for downstream and upstream 24.07.2015
Agilent 8703B Lightwave Component Analyzer Technical Specifications. 50 MHz to GHz modulation bandwidth
Agilent 8703B Lightwave Component Analyzer Technical Specifications 50 MHz to 20.05 GHz modulation bandwidth 2 The 8703B lightwave component analyzer is a unique, general-purpose instrument for testing
Provided by R&S FSH4/FSH8 Spectrum Analyzer Specifications
Provided by www.aaatesters.com R&S FSH4/FSH8 Spectrum Analyzer Specifications Test & Measurement Data Sheet 04.00 CONTENTS Specifications...3 Frequency...3 Sweep time...3 Bandwidths...4 Level...4 Trigger
R&S NRP USB and LAN Power Sensors Specifications
R&S NRP USB and LAN Power Sensors Specifications year Test & Measurement Data Sheet 04.00 CONTENTS Definitions... 3 Overview of the R&S NRP power sensors... 4 Specifications in brief of the R&S NRP power
Options and their applications Extensions for basic model OCXO Reference Oscillator For long-term stability OCXO Reference Oscillator For extremely high long-term stability Duplex Modulation Meter Allows
NI PXIe-5630 Specifications
NI PXIe-5630 Specifications RF Vector Network Analyzer This document lists specifications for the NI PXIe-5630 RF vector network analyzer (NI 5630). Specifications are warranted under the following conditions:
Agilent N9342C Handheld Spectrum Analyzer (HSA)
Agilent N9342C Handheld Spectrum Analyzer (HSA) Data Sheet Field testing just got easier The Agilent N9342C handheld spectrum analyzer (HSA) is more than easy-to-use its measurement performance gives you
Keysight Technologies N9320B RF Spectrum Analyzer
Keysight Technologies N9320B RF Spectrum Analyzer 9 khz to 3.0 GHz Data Sheet Definitions and Conditions The spectrum analyzer will meet its specifications when: It is within its calibration cycle It has
R&S FSWP Phase Noise Analyzer Specifications
R&S FSWP Phase Noise Analyzer Specifications Test & Measurement Data Sheet 05.00 CONTENTS Definitions... 4 Specifications... 5 Frequency... 5 Phase noise measurements... 5 Phase noise sensitivity with
Agilent N9320B RF Spectrum Analyzer
Agilent N9320B RF Spectrum Analyzer 9 khz to 3.0 GHz Data Sheet Definitions and Conditions The spectrum analyzer will meet its specifications when: It is within its calibration cycle It has been turned
Modulation Accuracy Measurements of DVB-S2 and DVB-S2X Signals Application Note
Modulation Accuracy Measurements of DVB-S2 and DVB-S2X Signals Application Note Products: ı ı ı ı R&S FSW-K70 R&S FSW-K70M R&S FPS-K70 R&S VSE-K70 This Application Note gives a short overview how signals
R&S DF-ATC-S ATC DF System Solution Accurate and reliable direction finding for civil and military air traffic control
Product Brochure Version 0.00 R&S DF-ATC-S ATC DF System Solution Accurate and reliable direction finding for civil and military air traffic control DF-ATC-S_bro_en_525-0792-2_v000.indd 20.02.208 :9:40
R&S FSUP Signal Source Analyzer Specifications
Test & Measurement Data Sheet 06.03 R&S FSUP Signal Source Analyzer Specifications CONTENTS Specifications... 3 All operating modes... 3 Signal source analyzer mode... 3 Phase noise measurement with PLL
R&S CMW100 Communications Manufacturing Test Set Specifications
R&S CMW100 Communications Manufacturing Test Set Specifications Data Sheet Version 02.00 CONTENTS Definitions... 6 General technical specifications... 7 RF generator... 8 Modulation source: arbitrary waveform
Agilent. E5071C ENA Network Analyzer 9 khz to 4.5/6.5/8.5 GHz 100 khz to 4.5/6.5/8.5 GHz (with bias tees) 300 khz to 14/20 GHz (with bias tees)
Agilent E5071C ENA Network Analyzer 9 khz to 4.5/6.5/8.5 GHz 0 khz to 4.5/6.5/8.5 GHz (with bias tees) 300 khz to 14/20 GHz (with bias tees) E5091A Multiport Test Set E5092A Configurable Multiport Test
Noise Figure Measurement in the 60 GHz Range Application Note
Noise Figure Measurement in the 60 GHz Range Application Note Products: R&S FSU67 Noisecom Noise Figure Test Set - NC5115-60G - NC5115-60GT This application note describes how noise figure and gain of
R&S ESR EMI Test Receiver Specifications
R&S ESR EMI Test Receiver Specifications Data Sheet Version 06.00 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Preselection and preamplifier... 6 IF and resolution bandwidths... 7 Level...