Data Sheet. HFBR-1312T Transmitter HFBR-2316T Receiver 1300 nm Fiber Optic Transmitter and Receiver. Description. Features. Applications.
|
|
- Tobias Price
- 5 years ago
- Views:
Transcription
1 HFBR-11T Transmitter HFBR-1T Receiver 100 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-000 Series is designed to provide the most cost-effective 100 nm fiber optic links for a wide variety of data communication applica tions from low-speed distance extenders up to SONET OC- signal rates. Pinouts identical to Avago HFBR-0400 Series allow designers to easily upgrade their 80 nm links for farther distance. The transmit ter and receiver are compatible with two popular optical fiber sizes: 50/15 m and.5/15 m diameter. This allows flexibility in choosing a fiber size. The 100 nm wave length is in the lower dispersion and attenua tion region of fiber, and provides longer distance capabilities than 80 nm LED technology. Typi cal distance capabilities are km at 15 MBd and 5 km at MBd. Transmitter The HFBR-11T fiber optic transmitter contains a 100 nm InGaAsP light emitting diode capable of efficiently launching optical power into 50/15 μm and.5/15 m diameter fiber. Converting the interface circuit from a HFBR-14XX 80 nm transmitter to the HFBR-11T requires only the removal of a few passive components. Features Low cost fiber optic link Signal rates over 155 megabaud 100 nm wavelength Link distances over 5 km Dual-in-line package panel-mountable ST* and SC connector receptacles Auto-insertable and wave-solderable Specified with.5/15 m and 50/15 m fiber Compatible with HFBR-0400Z Series Receiver also specified for SM cable spec (9/15 m) Applications Desktop links for high speed LANs Distance extension links Telecom switch systems TAXlchip compatible Receiver The HFBR-1T receiver con tains an InGaAs PIN photodiode and a low-noise transimpedance preamplifier that operate in the 100 nm wavelength region. The HFBR- 1T receives an optical signal and converts it to an analog voltage. The buffered output is an emitter-follower, with frequency response from DC to typically 15 MHz. Low-cost external compo nents can be used to convert the analog output to logic compatible signal levels for a variety of data formats and data rates. The HFBR-1T is pin compatible with HFBR-4X receivers and can be used to extend the distance of an existing application by substituting the HFBR-1T for the HFBR-41. *ST is a registered trademark of AT&T Lightguide Cable Connectors
2 HFBR-11T Transmitter HFBR-1T Receiver, ANODE CATHODE, V CC ANALOG SIGNAL V EE BOTTOM VIEW PIN NO. 1 INDICATOR PIN NO. 1 INDICATOR PIN * 8 FUNCTION ANODE CATHODE ANODE PIN 1 * 4 5 * 8 FUNCTION SIGNAL V EE V CC V EE * PIN IS ELECTRICALLY ISOLATED FROM PINS 1, 4, 5, AND 8, BUT IS CONNECTED TO THE HEADER. PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER. * PINS AND ARE ELECTRICALLY CONNECTED TO THE HEADER. PINS 1, 4, 5, AND 8 ARE ISOLATED FROM THE INTERNAL CIRCUITRY, BUT ARE ELECTRICALLY CONNECTED TO EACH OTHER.
3 HFBR-000 Series Mechanical Dimensions PART NUMBER DATE CODE 1. (0.495) YYWW HFBR-X1XTZ 1. (0.495) 9.8 (1.14) 5.05 (0.199).05 (0.8) DIA. Package Information HFBR-000 Series transmitters and receivers are housed is a dual-in-line package made of high strength, heat resistant, chem ically resistant, and UL V-0 flame retardant plastic. Transmitters are identified by the brown port color; receivers have black ports. The package is autoinsertable and wave solderable for high volume production applications. Note: The T in the product numbers indicates a Threaded ST connector (panel mountable), for both transmitter and receiver. Handling and Design Information When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean com pressed air is often sufficient to remove particles of dirt; methanol on a cotton swab also works well..81 (0.150).54 (0.100) /8- UNEF-A. (0.00).0 (0.48) 8.1 (0.).0 (0.140) 10.0 (0.400).54 (0.100) 5.10 (0.0) 1. (0.050) PINS 1,4,5, X 0.8 (0.00 X 0.015) PINS,,, 0.4 (0.018) DIA PIN NO. 1 INDICATOR
4 Panel Mounting Hardware The HFBR-4411 kit consists of 100 nuts and 100 washers with dimensions as shown in Figure 1. These kits are available from Avago or any authorized distrib utor. Any standard size nut and washer will work, provided the total thickness of the wall, nut, and washer does not exceed 0. inch (5.1 mm). When preparing the chassis wall for panel mounting, use the mounting template in Figure. When tightening the nut, torque should not exceed 0.8 N-m (8.0 in-lb). /8 - UNEF - B THREAD Recommended Chemicals for Cleaning/Degreasing HFBR-000 Products Alcohols (methyl, isopropyl, isobutyl) Aliphatics (hexane, heptane) Other (soap solution, naphtha) Do not use partially halogenated hydrocarbons (such as tri chloroethane), ketones (such as MEK), acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride, or N-methylpyrolldone. Also, Avago does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm. 9.5 (0.5) DIA. 1.0 (0.50) DIA. HEX-NUT 1.5 (0.05) 14. TYP. (0.5) DIA (0.8) DIA MAX. (0.410) DIA. INTERNAL TOOTH LOCK WASHER 8.0 (0.15) ALL DIMENSIONS IN MILLIMETERS AND (INCHES). Figure 1. HFBR-4411 mechanical dimensions. Figure. Recommended cut-out for panel mounting. HFBR-11T Transmitter Absolute Maximum Ratings Parameter Symbol Min. Max. Units Reference Storage Temperature T S C Operating Temperature T A C Lead Soldering Cycle Temperature 0 C Note 8 Lead Soldering Cycle Time 10 sec Forward Input Current DC I FDC 100 ma Reverse Input Voltage V R 1 V 4 CAUTION: The small junction sizes inherent to the design of this bipolar component increase the component s suscep ti bility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
5 HFBR-11T Transmitter Electrical/Optical Characteristics 0 C to 0 C unless otherwise specified Parameter Symbol Min. Typ. [1] Max. Unit Condition Ref. Forward Voltage V F V I F = 5 ma Fig. 1.5 I F = 100 ma Forward Voltage Temperature V F / T -1.5 mv/ C I F = ma Coefficient Reverse Input Voltage V R 1 4 V I R = 100 A Center Emission Wavelength C nm Full Width Half Maximum FWHM nm Diode Capacitance C T 1 pf V F = 0 V, f = 1 MHz Optical Power Temperature P T / T -0.0 db/ C I F = ma DC Coefficient Thermal Resistance JA 0 C/W Note HFBR-11T Transmitter Output Optical Power and Dynamic Characteristics Parameter Symbol Min. Typ. [1] Max. Unit Peak Power.5/15 m NA = 0.5 Peak Power 50/15 m NA = 0.0 Condition T A I F, peak P T dbm 5 C 5 ma Notes, 4, C 5 ma Fig C 100 ma C 100 ma P T dbm 5 C 5 ma Notes, 4, C 5 ma Fig C 100 ma C 100 ma Optical Overshoot OS 5 10 % 0-0 C 5 ma Note Fig. 5 Rise Time t r ns 0-0 C 5 ma Note Fig. 5 Fall Time t f. 4.0 ns 0-0 C 5 ma Note Fig. 5 Notes: 1. Typical data are at T A = 5 C.. Thermal resistance is measured with the transmitter coupled to a connector assembly and mounted on a printed circuit board; JC < JA.. Optical power is measured with a large area detector at the end of 1 meter of mode stripped cable, with an ST* precision ceramic ferrule (MILSTD-85/1), which approximates a standard test connector. Average power measurements are made at 1.5 MHz with a 50% duty cycle drive current of 0 to I F,peak ; I F,average = I F,peak /. Peak optical power is db higher than average optical power. 4. When changing from W to dbm, the optical power is referenced to 1 mw (1000 W). Optical power P(dBm) = 10*log[P( W)/1000 W]. 5. Fiber NA is measured at the end of meters of mode stripped fiber using the far-field pattern. NA is defined as the sine of the half angle, determined at 5% of the peak intensity point. When using other manufacturer s fiber cable, results will vary due to differing NA values and test methods.. Overshoot is measured as a percentage of the peak amplitude of the optical waveform to the 100% amplitude level. The 100% amplitude level is determined at the end of a 40 ns pulse, 50% duty cycle. This will ensure that ringing and other noise sources have been eliminated.. Optical rise and fall times are measured from 10% to 90% with.5/15 m fiber. LED response time with recommended test circuit (Figure ) at 5 MHz, 50% duty cycle mm from where leads enter case. Ref. 5
6 IF FORWARD CURRENT ma V F FORWARD VOLTAGE V Figure. Typical forward voltage and current characteristics. RELATIVE POWER RATIO I F FORWARD CURRENT ma Figure 4. Normalized transmitter output power vs. forward current. DATA + DATA 0.1 F V MC10H11A NE F TANTALUM 0.1 F 150 NE414 HFBR-11TZ, MC10H11B V bb MC10H11C NOTES: 1. ALL RESISTORS ARE 5% TOLERANCE.. BEST PERFORMANCE WITH SURFACE MOUNT COMPONENTS.. DIP MOTOROLA MC10H11 IS SHOWN, PLCC MAY ALSO BE USED. 0 Figure 5. Recommended transmitter drive and test circuit.
7 HFBR-1T Receiver Absolute Maximum Ratings Parameter Symbol Min. Max. Units Reference Storage Temperature T S C Operating Temperature T A C Lead Soldering Temperature 0 C Note 1 Cycle Time 10 Signal Pin Voltage V O -0.5 V CC V Supply Voltage V CC V EE V Note Output Current I O 5 ma CAUTION: The small junction sizes inherent to the design of this bipolar component increase the component s suscep ti bility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. HFBR-1T Receiver Electrical/Optical and Dynamic Characteristics 0 to 0 C; 4.5 V < V CC V EE < 5.5 V; power supply must be filtered (see note ). Parameter Symbol Min. Typ. [] Max. Unit Condition Ref. Responsitivity R P.5 m mv/ W p = 100 nm, 50 MHz Multimode Fiber Note 4 Fig., 10.5/15 m R P 9 m Singlemode Fiber 9/15 m RMS Output Noise Voltage V NO mv RMS 100 MHz Bandwidth, P R = 0 W Note 5 Fig. 1.0 mv RMS Unfiltered Bandwidth, P R = 0 W Equivalent Optical P N, RMS MHz, P R = 0 W Note 5 Noise Input Power (RMS) W Peak Input Optical Power P R dbm 50 MHz, 1 ns PWD Note Fig W Output Resistance R O 0 Ohm f = 50 MHz DC Output Voltage V O,DC V V CC = 5 V, V EE = 0 V P R = 0 W Supply Current I CC 9 15 ma R LOAD = Electrical Bandwidth BW E 5 15 MHz - db electrical Note Bandwidth * Rise Time Product 0.41 Hz *s Note 11 Electrical Rise, Fall Times, 10-90% t r,t f. 5. ns P R = -15 dbm 50 MHz Note 8 Fig. 9 Pulse-Width Distortion PWD ns P R = -11 dbm, peak Note, 9 Fig. 8 Overshoot % P R = -15 dbm, peak Note 10 *Mini-Circuits Division of Components Corporation.
8 Notes: 1..0 mm from where leads enter case.. The signal output is referred to V CC, and does not reject noise from the V CC power supply. Consequently, the V CC power supply must be filtered. The recommended power supply is +5 V on V CC for typical usage with +5 V ECL logic. A -5 V power supply on V EE is used for test purposes to minimize power supply noise.. Typical specifications are for operation at T A = 5 C and V CC = +5 V DC. 4. The test circuit layout should be in accordance with good high frequency circuit design techniques. 5. Measured with a 9-pole brick wall low-pass filter [Mini-Circuits TM, BLP-100*] with - db bandwidth of 100 MHz dbm is the maximum peak input optical power for which pulse-width distortion is less than 1 ns.. Electrical bandwidth is the frequency where the responsivity is - db (electrical) below the responsivity measured at 50 MHz. 8. The specifled rise and fall times are referenced to a fast square wave optical source. Rise and fall times measured using an LED optical source with a.0 ns rise and fall time (such as the HFBR-11T) will be approximately 0. ns longer than the specifled rise and fall times. E.g.: measured t r,f [(specifled t r,f ) + (test source optical t r,f ) ] 1/ ns pulse width, 50% duty cycle, at the 50% amplitude point of the waveform. 10. Percent overshoot is defined as: ((V PK - V 100% )/V 100% ) x 100%. The overshoot is typically % with an input optical rise time 1.5 ns. 11. The bandwidth*risetime product is typically 0.41 because the HFBR-1TZ has a second-order bandwidth limiting characteristic. HFBR-1TZ V CC = 0 V 10 V O, TEST LOAD 5 pf GHz FET PROBE pf 0.1 F 100 pf 0.1 F V EE = -5 V V EE = -5 V Figure. HFBR-1T receiver test circuit. 8
9 150.0 SPECTRAL NOISE DENSITY nv/ HZ PWD PULSE WIDTH DISTORTION ns FREQUENCY MHZ Figure. Typical output spectral noise density vs. frequency P R INPUT OPTICAL POWER W Figure 8. Typical pulse width distortion vs. peak input power. tr tf RESPONSE TIME ns t f.0 t r TEMPERATURE C Figure 9. Typical rise and fall times vs. temperature. NORMALIZED RESPONSE WAVELENGTH nm Figure 10. Normalized receiver spectral response. For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright Avago Technologies. All rights reserved. Obsoletes EN AV0-591EN - June 11, 01
Data Sheet. HFBR-1312TZ Transmitter HFBR-2316TZ Receiver nm Fiber Optic Transmitter and Receiver. Description. Features.
HFBR-11TZ Transmitter HFBR-1TZ Receiver 100 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-11TZ Transmitter and HFBR-1TZ Receiver are designed to provide the most cost-effective
More informationData Sheet. HFBR-0300Z Series HFBR-1312TZ Transmitter HFBR-2316TZ Receiver nm Fiber Optic Transmitter and Receiver. Features.
HFBR-000Z Series HFBR-TZ Transmitter HFBR-TZ Receiver 00 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-000Z Series is designed to provide the most cost-effective 00 nm fiber optic
More informationData Sheet. HFBR-1506AMZ/HFBR-2506AMZ Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications. Description. Features.
HFBR-0AMZ/HFBR-20AMZ Fiber Optic SMA Transmitters and Receivers for MBd SERCOS Applications Data Sheet Description SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard digital interface
More informationData Sheet HFBR-1506AFZ/HFBR-2506AFZ. Full Metal Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications. Description.
HFBR-0AFZ/HFBR-20AFZ Full Metal Fiber Optic SMA Transmitters and Receivers for MBd SERCOS Applications Data Sheet Description SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard
More informationAFBR-1555ARZ, AFBR-2555ARZ (SMA Tx/Rx for SERCOS)
Reinforced Metal Fiber Optic Transmitter and Receiver for SERCOS Applications Description SERCOS The Serial Realtime Communications System (SERCOS) is a standard digital interface for communication in
More informationRECEIVER. Package Options. Transmitter (TX) PLD-1315TM PLD-1315M. Receiver (RX) PLD-23XXTM PLD-23XXM
PLD- and PLD-XX Series Long wavelength Single-mode Fiber Optic TX & RX Modules Product Data Sheet FEATURES, RX InGaAs photodiode w/ integrated TIA, 0nm operation Up to 0 Mb/s differential signal output
More informationHFBR-1505AFZ/2505AFZ (SMA Tx/Rx for SERCOS) HFBR-1515BFZ/2515BFZ (ST Tx/Rx for PROFIBUS) HFBR-1505CFZ/2505CFZ (SMA Tx/Rx for INTERBUS-S)
HFBR-0AFZ/20AFZ (SMA Tx/Rx for SERCOS) HFBR-BFZ/2BFZ (ST Tx/Rx for PROFIBUS) HFBR-0CFZ/20CFZ (SMA Tx/Rx for INTERBUS-S) Full Metal Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S
More informationHFBR-1505AZ/2505AZ (SMA
HFBR-0AZ/20AZ (SMA Tx/Rx for SERCOS) HFBR-BZ/2BZ (ST Tx/Rx for PROFIBUS) HFBR-0CZ/20CZ (SMA Tx/Rx for INTERBUS-S) Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications
More informationFiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications. Technical Data
Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications Technical Data HFBR-0A/20A (SMA Tx/Rx for SERCOS) HFBR-B/2B (ST Tx/Rx for PROFIBUS) HFBR-0C/20C (SMA Tx/Rx for INTERBUS-S)
More informationThe HFBR-1604 is a selected version of the HFBR-1602, with power specified to meet the
SERCOS Fiber Optic Transmitters and Receiver Technical Data HFBR-0600 Series Features Fully Compliant to SERCOS Optical Specifications Optimized for 1 mm Plastic Optical Fiber Compatible with SMA Connectors
More informationFeatures. Applications
HFBR-8 Series HFBR-8 Transmitter HFBR-8 Receiver Megabaud Versatile Link Fiber Optic Transmitter and Receiver for mm POF and µm HCS Data Sheet Description The HFBR-8 Series consists of a fiber-optic transmitter
More informationIsolation in Test and Measurement Instruments Error Free Signalling for Industrial and Manufacturing
Versatile Link The Versatile Fiber Optic Connection Technical Data HFBR-0501 Series Features Low Cost Fiber Optic Components Enhanced Digital Links dc-5 MBd Extended Distance Links up to 120 m at 40 kbd
More informationData Sheet. HFBR-0500ETZ Series Versatile Link The Versatile Fiber Optic Connection. Description. Features. Applications
HFBR-0500ETZ Series Versatile Link The Versatile Fiber Optic Connection Data Sheet Description The Versatile Link series is a complete family of fiber optic link components for applications requiring a
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HFBR-0400 Series HFBR-14xx Transmitters HFBR-24xx Receivers Low Cost, Miniature
More informationData Sheet AFBR-2419MZ. 50 MBd Miniature Link Fiber Optic Receiver. Description. Features. Applications. AFBR-24x9xZ Available Part Numbers
AFBR-2x9xZ 0 MBd Miniature Link Fiber Optic Receiver Data Sheet Description The AFBR-2x9Z series components provide cost effective, high performance fiber optic communication links for information systems
More information12 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 μm HCS. Features. Applications
HFBR-EZ Transmitter HFBR-EZ Receiver Megabaud Versatile Link Fiber Optic Transmitter and Receiver for mm POF and μm HCS Data Sheet Description The HFBR-EZ transmitter is an LED in a low cost plastic housing
More informationData Sheet AFBR-2418MZ. DC-50MBd Miniature Link Fiber Optic Receiver. Description. Features. Applications. AFBR-24x8xZ Available Part Numbers
AFBR-2xxZ DC-0MBd Miniature Link Fiber Optic Receiver Data Sheet Description The component is designed to provide cost effective, high performance fiber optic communication links for information systems
More informationData Sheet. HFBR-0500Z Series Versatile Link The Versatile Fiber Optic Connection. Description. Features. Applications
HFBR-0500Z Series Versatile Link The Versatile Fiber Optic Connection Data Sheet Description The Versatile Link series is a complete family of fiber optic link components for applications requiring a low
More informationFiber Optic LAN Components VF45 Quad Transceiver for 10Mb/s and 100Mb/s Ethernet
FEATURES Key component for making a fiber optic Ethernet truly scalable and switchable from 10 to 100Mb/s Ethernet. Innovative NEW interconnect is cost competitive with copper solutions, thus enabling
More informationData Sheet. HFBR-0400Z, HFBR-14xxZ and HFBR-24xxZ Series. Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports.
HFBR-0400Z, HFBR-14xxZ and HFBR-4xxZ Series Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports Data Sheet Description The HFBR-0400Z Series of components is designed to provide cost
More informationData Sheet. HFBR-14xxZ and HFBR-24xxZ Series Low-Cost, 820 nm Miniature Link Fiber Optic Components with ST, SMA, SC and FC Ports.
HFBR-14xxZ and HFBR-4xxZ Series Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC and FC Ports Data Sheet Description The 80 nm Miniature Link Series of components is designed to provide
More informationDistributed by: www.jameco.com -800-83-22 The content and copyrights of the attached material are the property of its owner. 25 Megabaud Versatile Link The Versatile Fiber Optic Connection Technical Data
More informationData Sheet. AFBR-3950xxRZ High Voltage Galvanic Insulation Link for DC to 50MBaud. Features. Description. Applications. Ordering Information
AFBR-3950xxRZ High Voltage Galvanic Insulation Link for DC to 50MBaud Data Sheet Description Avago Technolgies AFBR-3950xxRZ is a high voltage galvanic insulation link for DC to 50 MBaud. The AFBR- 3950xxRZ
More informationHFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports Description The 80 nm Miniature Link Series of components is designed to provide cost-effective, high-performance fiber
More informationAFBR-1528CZ and AFBR-2528CZ
DC to 10-MBd Versatile Link Fiber Optic Analog Transmitter and Digital Receiver for 1-mm POF and 200-μm PCS Description The AFBR-1528CZ analog transmitter utilizes a 650-nm LED source, and the AFBR-2528CZ
More informationHFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports Description The 80 nm Miniature Link Series of components is designed to provide cost-effective, high-performance fiber
More informationData Sheet. AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm PCS.
AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm PCS Data Sheet Description The AFBR-16xxZ transmitter utilizes a 650 nm LED source with
More informationFIBER105.TIF OUTLINE DIMENSIONS in inches (mm) .176 (4.47).165 (4.19) .500 MIN (12.7) FIBER203.DIM. Pinout 1. Capacitor 2. VÙÙ 3.
FEATURES Converts fiber optic input signals to TTL digital outputs Typical sensitivity 500 nw peak ( 33 dbm) Single 5 V supply requirement Edge detection circuitry gives 20 db minimum dynamic range, low
More informationHFD3029. Schmitt Input, Non-Inverting TTL Output Receiver
FEATURES Converts fiber optic input signals to TTL totem pole outputs Sensitivity is 1.5 µw peak (-28.2 dbm) Single 5 V supply requirement Schmitt circuitry gives 17 db dynamic range and low Pulse Width
More informationOPF2416, OPF2416T, OPF2416TC
Features: Up to 155Mbps operation 850nm wavelength ST style port Wave solderable Wide temperature range Description: The OPF2416 family is a low cost solution for high speed fiber optic communications
More informationEuropean Connectorized Receivers
European Connectorized Receivers Honeywell receiver components are available in the following connector styles. Each style has a three-digit reference used in the order guides. SMA SINGLE HOLE MOUNTING
More informationFT10MHNR FT10MVNR. 650 nm DC 10 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT10MHNR FT10MVNR 650 nm DC 10 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC to 10 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity
More informationData Sheet. AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 m PCS.
AFBR-6xxZ and AFBR-6x4Z/5x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for mm POF and 00 m PCS Data Sheet Description The AFBR-6xxZ transmitter utilizes a 650 nm LED source with integrated
More informationFT05MHNR FT05MVNR. 650 nm DC 5 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT05MHNR FT05MVNR 650 nm DC 5 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC to 5 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity
More informationHFD Mbit Direct Coupled Receiver
FEATURES Converts fiber optic input signals to TTL digital outputs Typical sensitivity 2 µw (-27 dbm) Single 5 V supply requirement Direct coupled receiver circuit Open collector output Microlens optics
More informationFT01MHNG FT01MVNG. 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT01MHNG FT01MVNG 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 1 MBd green 530 nm transmitter is designed for maximum distance at low speed communication in
More informationRoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationHFD /XXX. h 479. Schmitt Input, Non-Inverting TTL Output Receiver
FEATURES Converts fiber optic input signals to TTL totem pole outputs Maximum sensitivity 1.5 µw peak (-28.2 dbm) Wide variety of cable options, operates with 50/125, 62.5/125, and 100/140 µm cables Schmitt
More informationFT10MHLR FT10MVLR. 650 nm DC-10 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT10MHLR FT10MVLR 650 nm DC-10 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 10 MBd low current RedLink transmitter is a highly reliable Resonant Cavity Light Emitting Diode
More informationData Sheet. HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd. Description.
HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd Data Sheet Description The HFBR-1119TZ/-2119TZ series of data links are highperformance, cost-efficient,
More informationFT05MxNR. 650 nm DC-5 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT05MxNR 650 nm DC-5 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 5 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity Light Emitting
More informationRoHS compliant 1310 nm Single-mode Transceiver (S1.1, 19dB margin) 1x9, SC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (S1.1) Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More informationRoHS compliant 1310 nm Single-mode Transceiver (L1.1) 1x9, ST Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet.
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationData Sheet. HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd
HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd Data Sheet Description The HFBR-1119TZ/-2119TZ series of data links are high-performance, cost-efficient,
More informationData Sheet. HFBR-1116T Transmitter HFBR-2116T Receiver Fiber Optic Transmitter and Receiver Data Links for 155 MBd
HFBR-1116T Transmitter HFBR-2116T Receiver Fiber Optic Transmitter and Receiver Data Links for 155 MBd Data Sheet Description The HFBR-1116/-2116 series of data links are highperformance, cost-efficient,
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More information4N25 Phototransistor Optocoupler General Purpose Type. Features
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More informationFT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet
FT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC 50 MBd RedLink transmitter consists of a highly reliable Resonant
More informationFT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet
FT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink transmitter consists of a highly reliable Resonant Cavity Light Emitting
More informationFeatures. Applications. Truth Table (Positive Logic) LED ENABLE OUTPUT
ACNVE mm DTI, MBd Digital Optocoupler Data Sheet Description The new ACNVE is an optically coupled gate that combines a AlGaAs light emitting diode and an integrated photo detector housed in a widebody
More informationRoHS compliant 1310 nm multi-mode Transceiver (2 km) 1x9, SC Duplex Connector, 5.0 V 155 Mbps ATM/ Fast Ethernet
Features RoHS compliant Industry standard 1 9 footprint SC duplex connector Single power supply 5.0 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser
More informationAgilent 4N35 Phototransistor Optocoupler General Purpose Type
Agilent N3 Phototransistor Optocoupler General Purpose Type Data Sheet Description The N3 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a phototransistor.
More informationData Sheet. AFBR-S10TR001Z Compact 650 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF. Description.
AFBR-STRZ Compact 65 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF Data Sheet Description Avago Technologies' AFBR-STRZ transceiver provides system designers with the
More informationSchematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1).
CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Technical Data HCPL-7601 HCPL-7611 Features Low Input Current Version of HCPL-2601/11 and 6N137 Wide Input Current Range: I F =
More informationRoHS compliant 1310 nm Single-mode Transceiver (10km) 1 9, ST Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet
Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V/5V Differential LVPECL/PECL
More informationPARAMETER SYMBOL MIN MAX UNITS NOTE
Features Industry standard 2 5 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser product complies with
More informationData Sheet. Description. Features. Transmitter. Applications. Receiver. Package
AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver
More informationFeatures 8.6 (0.34) 1.52 (0.060) 20.8 (0.82) 11.7 (0.46) 1.78 ± 0.10* (0.070 ± 0.004) 2.92 ± 0.10** (0.115 ± 0.004) 10.2 (0.400)
HEDS-92 Series Linear Optical Incremental Encoder Modules Data Sheet Note: Codestrip not included with HEDS-92 Description The HEDS-92 series is a high performance, low cost, optical incremental encoder
More informationData Sheet. ASSR-4118, ASSR-4119 and ASSR Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35 ) Features. Description. Functional Diagram
ASSR-, ASSR-9 and ASSR- Form A, Solid State Relay (Photo MOSFET) (00V/0.0A/ ) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled
More informationHDSP-740x Series 7.6 mm (0.3 inch) Micro Bright Seven Segment Displays. Features. Green [1]
HDSP-74x Series 7.6 mm (.3 inch) Micro Bright Seven Segment Displays Data Sheet HDSP-74x Series, HDSP-75x Series, HDSP-78x Series, HDSP-A5x Series, HDSP-A4x Series Description The 7.6 mm (.3 inch) LED
More information8.6 (0.34) 1.52 (0.060) 20.8 (0.82) 11.7 (0.46) 1.78 ± 0.10 (0.070 ± 0.004) 2.92 ± 0.10 (0.115 ± 0.004) 10.2 (0.400)
HEDS-9200 Series Linear Optical Incremental Encoder Modules Data Sheet Note: Codestrip not included with HEDS-9200 Description The HEDS-9200 series is a high performance, low cost, optical incremental
More informationData Sheet. HFBR-1116TZ Transmitter HFBR-2116TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 155 MBd. Description.
HFBR-1116TZ Transmitter HFBR-2116TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 155 MBd Data Sheet Description The HFBR-1116TZ/-2116TZ series of data links are highperformance, cost-efficient,
More informationData Sheet. AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links. Description. Features. Specifications.
AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links Data Sheet Description The AFBR-1310xZ is a compact, high performance, cost effective transmitter for multi GHz analog communication
More informationDC-5 MBd RedLink Transmitter and Receiver Pair
DC-5 MBd RedLink Transmitter and Receiver Pair DATA SHEET 650 nm DC-5 MBd RedLink Fiber Optic Transmitter and Receiver FEATURES Ideal for use with POF Optimized for data transmission from DC to 5 MBd Industrial
More informationHDSP-Uxxx Series HDSP-U1xx/U2xx/U3xx/U4xx/U5xx Series 8 mm (0.31 inch) Ultra Mini Seven Segment Displays. Features. Green
Uxxx Series Uxx/U2xx/U3xx/Uxx/U5xx Series 8 mm (.3 inch) Ultra Mini Seven Segment Displays Data Sheet Description The 8 mm (.3 inch) LED seven segment displays are Avago s most space-efficient character
More informationData Sheet. AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST. Features. Description. Applications.
AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST Data Sheet Description MOST150 transmitter and receiver are designed to transmit/ receive up to 150 MBit/s optical data
More informationData Sheet. ASSR-1218, ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Features. Description. Functional Diagram
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
More informationFeatures. Description. PART NUMBER TX RX VOLTAGE TEMPERATURE KSB2-A3S-PC-N nm 1310 nm 3.3 V 0 C to 70 C
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationHOD /BBA HOD /BBA
FEATURES Full duplex over single fiber DC to 160 MHz link bandwidth Link budgets of 2 km [1.24 miles] or greater 40 db isolation Low profile ST housing Other options available VCSEL is Class 1 eye safe
More informationPART NUMBER TX RX VOLTAGE TEMPERATURE. LSB2-A3M-PC-N nm 1310 nm 3.3 V 0 C to 70 C LSB2-A3M-PI-N nm 1310 nm 3.
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationData Sheet. AFCT-5815xZ 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1. Description General. Features. Transmitter Section
AFCT-5815xZ 155 Mb/s Single Mode Fiber Optic Transceiver for ATM, SONET OC-3/SDH STM-1 Data Sheet Description General The AFCT 5815xZ transceiver is a high performance, cost effective module for serial
More informationAFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package
AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver
More information1550 nm Single-mode Transceiver (80km) 1 9, SC Duplex Connector, 3.3 V 622 Mbps ATM/SONET OC-12/SDH STM-4
No Shield Forward Clipper Backward Clipper Features Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL data inputs and outputs LVPECL Signal Detect output
More informationHDSP-U1xx Series 8 mm (0.31 inch) Ultra Mini Seven Segment Displays
HDSP-Uxx Series 8 mm (.3 inch) Ultra Mini Seven Segment Displays Data Sheet HDSP-Uxx/U2xx/U3xx/Uxx/U5xx Series Description The 8 mm (.3 inch) LED seven segment displays are Avago s most space-efficient
More informationHI-201HS. High Speed Quad SPST CMOS Analog Switch
SEMICONDUCTOR HI-HS December 99 Features Fast Switching Times, N = ns, FF = ns Low ON Resistance of Ω Pin Compatible with Standard HI- Wide Analog Voltage Range (±V Supplies) of ±V Low Charge Injection
More informationFM10DHIR FM10DHNR FM10DVIR FM10DVNR DC 10 RedLink Fiber Optic Receiver Preliminary Data Sheet
NOT RECOMMENDED FOR NEW DESIGNS * For new designs please see part numbers: FR10DHIR FR10DHNR FR10DVIR FR10DVNR FM10DHIR FM10DHNR FM10DVIR FM10DVNR DC 10 RedLink Fiber Optic Receiver Preliminary Data Sheet
More informationFeatures. Applications
HCPL-9000/-0900, -900/-090, HCPL-90/-09, -900J/-090J, HCPL-90J/-09J, -90J/-09J High Speed Digital Isolators Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe
More information1310NM FP LASER FOR 10GBASE-LRM SC AND LC TOSA
DATA SHEET 1310NM FP LASER FOR 10GBASE-LRM SC AND LC TOSA FP-1310-10LRM-X FEATURES: 1310nm FP laser Very low power dissipation SC and LC optical receptacles 10Gbps direct modulation Impedance matching
More informationFeatures. Applications 9.19 (0.352) 8.43 (0.332) 6.35 (0.250) 5.58 (0.220) 23.0 (0.90) MIN. CATHODE 1.27 (0.050)
HLMP-DB25, HLMP-KB45 T-1¾ (5 mm), T-1 (3 mm) Blue LED Lamps Data Sheet Description These blue LEDs are designed in industry standard T-1 and T-1¾ package with clear and non diffused optics. They are also
More informationACNT-H50L. 1-MBd Optocoupler in 15-mm Stretched SO8 Package. Data Sheet. Description. Features. Applications. Functional Diagram
ACNT-H5L -MBd Optocoupler in 5-mm Stretched SO8 Package Description The ACNT-H5L is a single-channel -MBd optocoupler in Stretched SO8 footprint. It uses an insulating layer between the light emitting
More informationUltrafast Comparators AD96685/AD96687
a FEATURES Fast: 2.5 ns Propagation Delay Low Power: 118 mw per Comparator Packages: DIP, SOIC, PLCC Power Supplies: +5 V, 5.2 V Logic Compatibility: ECL 50 ps Delay Dispersion APPLICATIONS High Speed
More informationWide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and 5-Pin SMT Package. Features. Applications ANODE
ACPL-MT Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and -Pin SMT Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;
More information1.52 (0.060) 20.8 (0.82) 11.7 (0.46) 1.78 ± 0.10 (0.070 ± 0.004) 2.92 ± 0.10 (0.115 ± 0.004) (0.400)
HEDS-9000/9100 Two Channel Optical Incremental Encoder Modules Data Sheet Description The HEDS-9000 and the HEDS-9100 series are high performance, low cost, optical incremental encoder modules. When used
More informationFR10DxxR. DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR10DxxR DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-10 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationHDSP-740x Series, HDSP-750x Series, HDSP-780x Series, HDSP-A15x Series, HDSP-A40x Series 7.6 mm (0.3 inch) Micro Bright Seven Segment Displays
HDSP-74x Series, HDSP-75x Series, HDSP-78x Series, HDSP-A5x Series, HDSP-A4x Series 7.6 mm (.3 inch) Micro Bright Seven Segment Displays Data Sheet Description The 7.6 mm (.3 inch) LED seven segment displays
More informationHOD /BBA HOD /BBA
FEATURES Full duplex over single fiber DC to 60 MHz link bandwidth Link budgets of km [.4 miles] or greater 40 db isolation Low profile ST housing Other options available VCSEL is Class eye safe APPLICATIONS
More informationVOLTAGE TEMPERATURE LD TYPE
Features Compliant with IEEE 802.3z Gigabit Ethernet standard Industry standard 1 9 footprint SC connector Single power supply 3.3/5.0 V Differential PECL inputs and outputs Compatible with solder and
More informationACPL-M50L, ACPL-054L, ACPL-W50L and ACPL-K54L Low Power, 1MBd Digital Optocoupler. Features. Applications GND
ACPL-M5L, ACPL-5L, ACPL-W5L and ACPL-K5L Low Power, MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
More informationHEDS-9000/9100 Two Channel Optical Incremental Encoder Modules. Features. Applications
HEDS-9000/9100 Two Channel Optical Incremental Encoder Modules Data Sheet Description The HEDS-9000 and the HEDS-9100 series are high performance, low cost, optical incremental encoder modules. When used
More informationFR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationFM20VHIR FM20VVIR. RedLink Fiber Optic Receiver for Direct High Voltage Switching Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
FM0VHIR FM0VVIR RedLink Fiber Optic Receiver for Direct High Voltage Switching Preliminary Data Sheet DESCRIPTION This Firecomms RedLink receiver is based on a fully integrated photodiode with TIA, limiting
More informationHFBR-5805/-5805T ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style Data Sheet
HFBR-5805/-5805T ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style Data Sheet Description The HFBR-5800 family of transceivers from Agilent provide the system designer with products
More informationFR05DHCR FR05DVCR. DC-5 MBd Open Collector Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FR05DHCR FR05DVCR DC-5 MBd Open Collector Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION The Firecomms DC to 5 MBd Dual supply voltage RedLink receiver is based on a fully integrated photo-diode
More information1300nm Fast Ethernet Transceiverin1x9SC Duplex Package
1300nm Fast Ethernet Transceiverin1x9SC Duplex Package OPF5102 Technical Data Features 1310nm LED Data Rate: 155Mbps, NRZ Single +3.3V Power Supply PECL Differential Electrical Interface Industry Standard
More informationSFH551/1-1 and SFH551/1-1V Receiver with Digital Output Stage for Polymer Optical Fiber Applications. Data Sheet. Description.
and V Receiver with Digital Output Stage for Polymer Optical Fiber Applicatio Data Sheet Description The receiver is a traimpedance amplifier with an integrated photodiode and TTL open-collector output
More informationRoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 1 9, SC Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet
No Shield Forward Clipper Backward Clipper Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint SC duplex connector Single
More informationData Sheet. AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector. Description. Features.
AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector Data Sheet Description The AFBR-59E4APZ is a new power saving Small Form Factor transceiver that gives the
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-2530 HCPL-2531 HCPL-4534 HCPL-0530 HCPL-0531 HCPL-0534 Features 15 kv/µs Minimum Common Mode Transient Immunity at V CM = 1500 V (HCPL-4534/0534)
More informationAgilent HCPL-354 AC Input Phototransistor Optocoupler SMD Mini-Flat Type
Agilent HCPL-34 AC Input Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Description The HCPL-34 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel.
More information