IT Series Woofers and Compression Drivers

Size: px
Start display at page:

Download "IT Series Woofers and Compression Drivers"

Transcription

1 IT Series Woofers and Compression Drivers Enclosure and Crossover Applications The HC Design IT Series low frequency woofers and high frequency drivers are very high performance transducers designed for sound reinforcement and public address applications where excellent intelligibility and clarity are required. HC Design offers complete enclosure design plans as well as passive crossover designs optimized for use with the IT Series components. Additionally, there are two complete passive crossovers that are available for use with all IT Series products. IT SERIES LOUDSPEAKER COMPONENTS The IT Series consists of three low frequency components: the IT 18, IT 15 and IT 12. Each component is designed for specific applications and is optimized for superior amplitude and time domain performance. There are also three high frequency drivers: the IT 77N, IT77F, and IT44. PASSIVE CROSSOVERS There are two high performance passive crossovers available for use with all IT Series components. The IT 12PC was designed for use with the IT 12 woofer and the IT 15PC was designed to be used with the IT 15 woofer. Each crossover has an on-board jumper that allows the specific woofer to be used with the IT 77 N (neodymium), the IT 77 F (ferrite) or the IT 44 compression driver. The image below shows a rendering of the passive crossover printed circuit board and the jumper. The jumper is connected to the pin labeled IT 77N, IT 77F, or IT 4, based on which specific IT series driver is being used. The jumper must be moved to the correct position based on the specific driver being used. The jumper configuration is identical for both the IT 12PC and the IT 15PC.

2 Figure 1: The IT crossover showing the jumper wire. Figure 2: Close up view of the IT crossover shown jumper labels. HC Designs offers the passive crossover schematic free of charge but does not offer individual components. The IT 12PC and IT 15PC passive crossover assemblies may be purchased from HC Design.

3 H SERIES HORNS HC Design offers two very high performance constant directivity horn designs. Both horns are fully rotatable. H64 The H64 is a 60 degree by 40 degree medium to long throw horn that is ideal for applications that require long throw and a controlled coverage pattern. The H64 is an excellent choice in applications where large crowds are present or in long and narrow venues. The H64 has a square mouth profile and is fully rotatable so that the desired acoustic radiation angles may be rotated in either the horizontal or the vertical plane. The H64 is a constant directivity design. The H64 horn may be used with the IT15-PC crossover in the following configurations: 152B enclosure: IT 77N driver - jumper position 1 IT 77F driver - jumper position 2 IT 44 driver - jumper position 3 and 3825 adaptor 152S enclosure: IT 77N driver - jumper position 1 IT 77F driver - jumper position 2 IT 44 driver - jumper position 3 and 3825 adaptor The H64 horn may also be used with the IT12-PC crossover in the following configurations: 122S enclosure: IT 77N driver - jumper to position 1 IT 77F driver - jumper to position 2 IT 44 driver - jumper to position 3 and 3825 adaptor H94 The H94 is a 90 degree by 40 degree short throw horn that is optimized for use in wide venues and is also ideal for monitoring applications. The H94 has a square mouth geometry and is fully rotatable to allow the desired acoustic radiation angles to be rotated in either the horizontal or vertical plane. The H94 is a constant directivity design. The H94 horn may be used with the 115PC crossover in the following configuration: 152B enclosure: IT 77F driver - jumper to position 2 and Driver polarity REVERSED

4 The H94 horn may also be used with the 112PC crossover in the following configurations: 122S enclosure: IT 77F driver jumper to position 2 and Driver polarity REVERSED IT 44 driver jumper to position 2 and Driver polarity REVERSED 122M enclosure: IT 77F driver jumper to position 2 and Driver polarity REVERSED IT 44 driver jumper to position 2 and Driver polarity REVERSED ENCLOSURE DESIGNS HC Design also offers enclosure plans for use with all IT Series components and horns. There are two 15 inch two way designs and two 12 inch two way designs. 152B The 152B is a large enclosure volume trapezoidal design that offers extremely extended and high acoustic output bass response. The 152B features an IT 15 in an optimally vented enclosure and incorporates either a fully rotatable 60 degree by 40 degree constant directivity horn with a 1.4 (35.5mm) throat diameter (H64) or a fully rotatable 90 degree by 40 degree 1.4 throat diameter horn (H94). The 60x40 horn or 90x40 will mate directly with the IT 77N or the IT 77F. Use of the IT 44 requires a 35mm to 25mm coupling adaptor that is also available through HC Design. The 152B should be constructed using high quality void free plywood. The use of plywood will allow excellent acoustic performance and minimize enclosure weight. Internal bracing is required to limit mechanical resonances. Acoustic performance above 120Hz is identical for the 152B and 152S. Coverage Pattern: Passive Crossover Frequency: System Sensitivity: (1 watt -1 meter) Power Handling: 50Hz 16kHz 60H x 40V Fully Rotatable (H64) or 90H x 40V Fully Rotatable (H94) 1800 Hz 96dB * NOTE: all system power handling rating are amplifier headroom dependent

5 Nominal Impedance: System Components: Low Frequency: High Frequency: Dimensions (H x W x D): IT 15 IT 77N/IT 77F/IT x 445 x mm 152S The 152S is a medium format 15 inch two way enclosure design that is ideal for portable applications. It features less extreme low frequency output then the 152B but offers improved portability. The 152S is a wide bandwidth system design that features very high peak and continuous power handling and extremely high system reliability. The high frequency horn is full rotatable and will all the high frequency radiation pattern to be configured to acoustic spaces. Acoustic performance above 120Hz is identical for the 152B and 152S. The 152S enclosure can incorporate either the H64 or H94 constant directivity horn. (See wiring polarity and configuration notes above for driver and horn selection) The 152S should be constructed using high quality void free plywood. The use of plywood will allow excellent acoustic performance and minimize enclosure weight. Internal bracing is required to limit mechanical resonances. Coverage Pattern: Passive Crossover Frequency: System Sensitivity: (1 watt -1 meter) Power Handling: Nominal Impedance: System Components: Low Frequency: High Frequency: Dimensions (H x W x D): 66Hz 16kHz 60H x 40V Fully Rotatable (H64) or 90H x 40V Fully Rotatable (H94) 1800 Hz 96dB * NOTE: all system power handling rating are amplifier headroom dependent IT 15 IT 77N/IT 77F/IT x 440 x mm

6 122S The 122S is a medium format 12 inch two way enclosure design that is ideal for portable applications. The 122S is a wide bandwidth system design that features very high peak and continuous power handling and extremely high system reliability. The high frequency horn is full rotatable and will all the high frequency radiation pattern to be configured to acoustic spaces. The 122S design will accommodate either the H64 or H94 high frequency constant directivity horn. The 122S should be constructed using high quality void free plywood. The use of plywood will allow excellent acoustic performance and minimize enclosure weight. Internal bracing is required to limit mechanical resonances. Coverage Pattern: Passive Crossover Frequency: System Sensitivity: (1 watt -1 meter) Power Handling: Nominal Impedance: System Components: Low Frequency: High Frequency: Dimensions (H x W x D): 65Hz 16kHz 60H x 40V Fully Rotatable (H64) or 90H x 40V Fully Rotatable (H94) 1800 Hz 96dB * NOTE: all system power handling rating are amplifier headroom dependent IT 12 IT 77N/IT 77F/IT x 368 x 353 mm 122M The 122M is a very high output controlled coverage floor monitor designed for use on both small and large stages. The 112M features excellent vocal range intelligibility and clarity and has been designed to provide superior vocal reproduction even in high ambient noise (loud) environments. The 112M features a controlled low frequency roll off that provides excellent vocal character and a very tight low end response.

7 The 122M is designed and optimized for high level floor monitor applications. The design incorporates the H94 high frequency constant directivity horn. The H94 may be rotated to optimize monitor and stage coverage. The 122M should be constructed using high quality void free plywood. The use of plywood will allow excellent acoustic performance and minimize enclosure weight. Internal bracing is required to limit mechanical resonances. Coverage Pattern: Passive Crossover Frequency: System Sensitivity: (1 watt -1 meter) Power Handling: Nominal Impedance: System Components: Low Frequency: High Frequency: Dimensions (H x W x D): 70Hz 16kHz 90H x 40V Fully Rotatable (H94) 1800 Hz 96dB * NOTE: all system power handling rating are amplifier headroom dependent IT 12 IT 77N/IT 77F/IT x x 398 mm 118S/218S The HC Design 118S and 218S are extended low frequency sub woofer designs intended for use with any of the HC Design 15 inch or 12 inch two way loudspeaker systems. The 118S and 218S are professional designs and do not have an associated passive crossover. In professional applications the subwoofer should be set up in a bi-amp configuration. Suggested active filter settings are as follows: 4 th order Butterworth (24dB/Oct) High Pass at 37Hz and 4 th order Linkwitz-Riley (24dB/Oct) Low Pass at 80Hz. A 4 th order Linkwitz-Riley (24dB/Oct) High Pass set to 80Hz should then be used to drive the top box in the system. The 118S features a single IT 18 extended low frequency sub woofer transducer and the 218S features two IT 18 devices for ultra high acoustic power and extended low frequency response. A block diagram of the suggested configuration is shown below. Any high quality Digital Signal Processor (DSP) or analog based crossover (with 4 th order filters) will work well as the crossover

8 Figure 3: Subwoofer set up with active crossover and Top Box 37Hz 120Hz Recommended Active Crossover Frequency: 80Hz System Sensitivity: (1 watt -1 meter) 96dB Power Handling: 118S 218S 1600 watts Continuous 3200 watts Program 6400 watts Peak* * NOTE: all system power handling rating are amplifier headroom dependent Nominal Impedance: 118S 218S 4 Ohms System Components:118S IT S 2 ea. IT 18 Dimensions (H x W x D): 118S 785 x 526 x 526 mm 218S

9 ENCLOSURE DESIGNS All IT Series enclosures should be constructed with 18mm thick void free plywood. Other materials, such as oriented strand board or high density particle board may be used but the highest strength and stiffness to weigh ratio will be achieved with the use of 18mm void free plywood. The enclosures should be assembled using high quality water proof wood glue. The enclosure pieces should be both glued and nailed to insure good joint bonding. The vents for the 118S may be either plastic tubing or cardboard. The outside diameter of the vent material is not critical as long as the wall thickness is the same or greater then specified. HC Design offers a suitable thick wall tube that is highly damped and excellent for sub woofer applications. The internal absorption is an important addition to any loudspeaker enclosure. This material must have the proper acoustic absorption characteristics in order to properly damp the internal vibrations. HC Designs offers acoustic absorption material and strongly suggests that no substitutes be used. The material offered by HC Design is an excellent material and is well suited for use in professional loudspeaker applications. Each IT Series enclosure is shown with internal bracing. This bracing is critical to proper time domain performance and should be both glued and nailed in place. Exact placement of the bracing is not critical.

FX inch Coaxial Vocal Monitor. product specification SERIES. Performance Specifications 1

FX inch Coaxial Vocal Monitor. product specification SERIES. Performance Specifications 1 FX896 8 inch Coaxial Vocal Monitor Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 94 Hz to 21 khz SERIES Nominal Beamwidth (rotatable) 90 x 60 Transducers HF/LF:

More information

Quadra 10 Available in Black and White

Quadra 10 Available in Black and White S P E C I F I C A T I O N S Quadra 10 Available in Black and White Frequency response, 1 meter on-axis, swept-sine in anechoic environment: 74 Hz 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information

SA1521 SPEAKER SA1521 SA1521. Features. Applications Live Applications Playback Applications Portable PA Systems Corporate Events

SA1521 SPEAKER SA1521 SA1521. Features. Applications Live Applications Playback Applications Portable PA Systems Corporate Events The is an active 2-way sound reinforcement speaker system designed for extreme accuracy, high output, and smooth dispersion across the entire audio frequency range. It integrates 5 watts of amplifier power,

More information

FA28. Dual 8 inch Coaxial Loudspeaker. product specification. Performance Specifications 1

FA28. Dual 8 inch Coaxial Loudspeaker. product specification. Performance Specifications 1 FA28 Dual 8 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 48 Hz to 20 khz Nominal Beamwidth (rotatable) 90 x 60 Transducers LF: 8.0 ceramic

More information

Quadra 15 Available in Black and White

Quadra 15 Available in Black and White S P E C I F I C A T I O N S Quadra 15 Available in Black and White Frequency response, 1 meter onaxis, swept-sine in anechoic environment: 64 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information

Low frequency section: 500 Watts continuous 1,000 Watts program 2,000 Watts peak

Low frequency section: 500 Watts continuous 1,000 Watts program 2,000 Watts peak SPECIFICATIONS QW 3 Frequency response, 1 meter on-axis, swept-sine in an anechoic environment: 50 Hz 16 khz (±3 db) Usable low frequency limit (-10 db point): 33 Hz Power handling: Full range: 1,000 Watts

More information

Because of the inherent midrange coloration of any "W -horn design, the recommended crossover frequency is 300Hz or lower.

Because of the inherent midrange coloration of any W -horn design, the recommended crossover frequency is 300Hz or lower. K151 or 2240H "W Horn In answer to long-standing requests from dealers and end users, JBL is pleased to make available this plan for user construction of a "W"-format folded horn designed specifically

More information

Quadra 12 Available in Black and White

Quadra 12 Available in Black and White S P E C I F I C A T I O N S Quadra 12 Available in Black and White Frequency response, 1 meter onaxis, swept-sine in anechoic environment: 76 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point):

More information

Technical Specifications KF853

Technical Specifications KF853 Technical Specifications F853 APPLICATIONS The F853 Virtual Array System is a long-throw two way horn-loaded loudspeaker designed to cover the frequency range from 2Hz to 17kHz. The frequency response

More information

FA22. Dual 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1

FA22. Dual 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1 FA22 Dual 12 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Bi-amplified w/ DSP Operating Range 2 44 Hz to 20 khz Nominal Beamwidth (rotatable) 90 x 45 Transducers LF: 12.0 neodymium

More information

8 inch Coaxial Loudspeaker

8 inch Coaxial Loudspeaker P 8 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 90 Hz to 20 khz Nominal Beamwidth 100 x 100 Transducers HF/LF: Coaxial 1.7 titanium diaphragm

More information

SSE 26 SPECIFICATIONS

SSE 26 SPECIFICATIONS SPECIFICATIONS SSE 26 Description The new SSE enclosure series features high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 26 is a two-way system featuring

More information

SPECS. Impulse (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System SPECIFICATIONS. Built under U.S.

SPECS. Impulse (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System SPECIFICATIONS. Built under U.S. SPECS P E A V E Y E L E C T R O N I C S Impulse 1012 (4 and 8 ohm) Two-Way Weather-Resistant Injection-Molded Speaker System Built under U.S. Patent 6,064,745 SPECIFICATIONS Enclosure: Peavey Impulse 1012

More information

FW inch Coaxial Cardioid Stage Monitor. product specification. Performance Specifications 1

FW inch Coaxial Cardioid Stage Monitor. product specification. Performance Specifications 1 FW15 15 inch Coaxial Cardioid Stage Monitor Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 67 Hz to 19 khz Nominal Beamwidth (rotatable) 75 x 75 Transducers HF/LF:

More information

DX896. Dual 8 inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1

DX896. Dual 8 inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1 DX896 Dual 8 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 72 Hz to 20 khz SERIES Nominal Beamwidth (rotatable) 90 x 60 Transducers LF:

More information

THE ART EVOLUTION CONTINUES

THE ART EVOLUTION CONTINUES ART 500 SERIES ART 500 SERIES THE ART EVOLUTION CONTINUES In 1998, the ART 500 Series was launched to provide systems for larger venues in both MI and Multimedia situations. This transition represented

More information

SSE 10 SPECIFICATIONS

SSE 10 SPECIFICATIONS SPECIFICATIONS SSE 10 Description The SSE is a new enclosure series featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 10 is a twoway system featuring

More information

Description. 175 watts Test Voltages: 34.2 volts rms 68.3 volts peak R SR (1.15 R E. ): 6.67 ohms. Suspending the Xi-1082

Description. 175 watts Test Voltages: 34.2 volts rms 68.3 volts peak R SR (1.15 R E. ): 6.67 ohms. Suspending the Xi-1082 Xi-1082 X-Array Install Two-Way, Full-Range, Sound-Reinforcement System 8-inch two-way 90 x 40 horn coverage 175-watts long term power capacity Ring-Mode Decoupling (RMD ) Full-range with internal passive

More information

CX896-MT inch Coaxial Loudspeaker, 70 V. product specification SERIES. Performance Specifications 1

CX896-MT inch Coaxial Loudspeaker, 70 V. product specification SERIES. Performance Specifications 1 CX896-MT120 8 inch Coaxial Loudspeaker, 70 V SERIES Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 84 Hz to 20 khz Nominal Beamwidth (rotatable) 90 x 60 Transducers

More information

Constant Power Point Source Array A Bold New Advancement in Concert Sound

Constant Power Point Source Array A Bold New Advancement in Concert Sound Constant Power Point Source Array A Bold New Advancement in Concert Sound Step Beyond the Limitations of Line Array A Bold New Advancement in Concert Sound Reinforcement KV2 Audio s philosophy has always

More information

SSE 12 SPECIFICATIONS

SSE 12 SPECIFICATIONS SPECIFICATIONS SSE 12 Description The SSE is a new enclosure series featuring high power ratings with custom components, a sleek look and a unique, snap-in metal grille. The SSE 12 is a twoway system featuring

More information

500 W (2000 W peak) 300 W (1200 W peak) 100 W (400 W peak)

500 W (2000 W peak) 300 W (1200 W peak) 100 W (400 W peak) Key Features 60 x 40 coverage for medium-throw applications in auditoriums, worship facilities, performing arts centers, and arenas Full-range loudspeaker with single 15" (381 mm) woofer provides 50 Hz

More information

Low Frequency Section: 98.0 db SPL, (2.83 V input) High Frequency Section: db SPL, (2.83 V input)

Low Frequency Section: 98.0 db SPL, (2.83 V input) High Frequency Section: db SPL, (2.83 V input) S P E C I F I C A T I O N S ILS 1564 Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 47 Hz - 18.5 khz (±3 db) Usable Low Frequency Limit (-10 db point): 38 Hz Power Handling: Full

More information

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DXR12

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DXR12 Overview The DXR12 is an extremely high-power loudspeaker that is capable of producing a maximum SPL of 132dB with its impressive 1100W of power. It is the perfect solution for live sound applications

More information

SPECIFICATIONS QW -1. Listen To This. Mid Frequency Section: 101 db SPL, (2 Volt input) High Frequency Section: 111 db SPL, (2.

SPECIFICATIONS QW -1. Listen To This. Mid Frequency Section: 101 db SPL, (2 Volt input) High Frequency Section: 111 db SPL, (2. SPECIFICATIONS QW -1 Frequency response, 1 meter on-axis, swept-sine in an anechoic environment: 200 Hz to 18 khz (±3 db) Usable low frequency limit (-10 db point): 150 Hz Power handling: Full Range: 600

More information

GX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1

GX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1 GX1277 12 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 49 Hz to 20 khz SERIES Nominal Beamwidth (rotatable) 75 x 75 Transducers HF/LF:

More information

CX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1

CX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1 CX1295 12 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 68 Hz to 20 khz SERIES Nominal Beamwidth (rotatable) 90 x 45 Transducers HF/LF:

More information

CX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1

CX inch Coaxial Loudspeaker. product specification SERIES. Performance Specifications 1 CX826 8 inch Coaxial Loudspeaker SERIES Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 78 Hz to 20 khz Nominal Beamwidth (rotatable) 120 x 60 Transducers HF/LF: Coaxial

More information

Constant Power Point Source Array VHD5.0

Constant Power Point Source Array VHD5.0 Constant Power Point Source Array VHD5.0 Constant Power Point Source Array VHD5.0 Product Overview video VHD5.0 Introduction VHD5.0 - Mid High Module VHD8.10 - Low Mid Module SL412 - Downfill VHD5.0 Amplifiers

More information

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR112

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR112 Overview The DSR112 is the most compact and versatile multi-purpose 2-way active loudspeaker system in the series. Capable of an astonishing maximum peak SPL of 134dB, the DSR112 is a perfect match to

More information

RX599-MT inch Coaxial Loudspeaker, 70 V. product specification SERIES. Performance Specifications 1

RX599-MT inch Coaxial Loudspeaker, 70 V. product specification SERIES. Performance Specifications 1 RX599-MT30 5.25 inch Coaxial Loudspeaker, 70 V SERIES Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 100 Hz to 20 khz Nominal Beamwidth 90 x 90 Transducers HF/LF:

More information

Features: Description

Features: Description Features: Peavey Exclusive Lo Max 18" Subwoofer Extended frequency response down to 33 Hz (half-space) 2400 watts of program power rating Full power low frequency response down to 38 Hz! Neutrik Speakon

More information

SA1232 SA1232 SPEAKER SA O F 6 P A G E S. Active 3-Way Sound Reinforcement Speaker System

SA1232 SA1232 SPEAKER SA O F 6 P A G E S. Active 3-Way Sound Reinforcement Speaker System The is a high-efficiency, extreme-output, active 3-way, wide dispersion, sound reinforcement speaker system. The benefits from the integration of 13 watts of amplifier power, complete active control electronics,

More information

RD75, RD50, RD40, RD28.1 Planar magnetic transducers with true line source characteristics

RD75, RD50, RD40, RD28.1 Planar magnetic transducers with true line source characteristics RD75, RD50, RD40, RD28.1 Planar magnetic transducers true line source characteristics The RD line of planar-magnetic ribbon drivers represents the ultimate thin film diaphragm technology. The RD drivers

More information

not overpower the audience just below and in front of the array.

not overpower the audience just below and in front of the array. SPECIFICATIONS SSE LA Description Designed for use in permanent professional installations in churches, theaters, auditoriums, gyms and theme parks, the SSE LA is a dual-radius dius curved line array that

More information

VQ 60. Product Description. Features. Applications

VQ 60. Product Description. Features. Applications VQ 6 Product Description The VQ 6 is a full range, three-way loudspeaker system designed for applications which require very high output capability with class leading pattern control. The VQ 6 is perfectly

More information

Operating Mode: PERFORMANCE Operating Range: Nominal Beamwidth: (rotatable) Horz 90 Vert 45 Axial Sensitivity (whole space SPL):

Operating Mode: PERFORMANCE Operating Range: Nominal Beamwidth: (rotatable) Horz 90 Vert 45 Axial Sensitivity (whole space SPL): 2-WAY FULL-RANGE LOUDSPEAKER 90 45 See NOTES TABULAR DATA for details CONFIGURATION Subsystem: Operating Mode: Transducer LF 1 15 in cone HF 1 1.4 in exit, 3 in voice coil compression driver Single-amp

More information

Operating Mode: PERFORMANCE 1 Operating Range: 57 Hz to 15 khz Nominal Beamwidth: (rotatable) Horz 120 Vert 60 Axial Sensitivity (whole space SPL):

Operating Mode: PERFORMANCE 1 Operating Range: 57 Hz to 15 khz Nominal Beamwidth: (rotatable) Horz 120 Vert 60 Axial Sensitivity (whole space SPL): DESCRIPTION Premium Performance Application Flexibility The MK5300 Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses

More information

SPECIFICATIONS QW -215

SPECIFICATIONS QW -215 Box tuning frequency: 40 Hz Harmonic distortion: 1% rated power Second Harmonic: Hz:.58% 500 Hz:.33% Third Harmonic: Hz:.19% 500 Hz:.33% 10% rated power Second Harmonic: Hz: 1.90% 500 Hz: 1.30% Third Harmonic:

More information

SSE S5 SPECIFICATIONS

SSE S5 SPECIFICATIONS SPECIFICATIONS SSE S5 Description Designed for use in professional permanent installation in churches, theaters, auditoriums, gyms, and theme parks, the SSE S5 is a two-way speaker system, which provides

More information

Model Owner s Manual. Active 3-Way Studio Monitor System.

Model Owner s Manual. Active 3-Way Studio Monitor System. Model 4288 Active 3-Way Studio Monitor System Owner s Manual www.chrispelonisspeakers.com Model 4288 The Model 4288 is a 3-way active monitoring system for a Full range listening experience. Similarly

More information

PASSIVE SPEAKER SYSTEMS OWNER'S MANUAL ENGLISH

PASSIVE SPEAKER SYSTEMS OWNER'S MANUAL ENGLISH PASSIVE SPEAKER SYSTEMS OWNER'S MANUAL ENGLISH Warranty Information UNPACKING As a part of our system of quality control, every STK product is carefully inspected before leaving the factory to insure flawless

More information

FH1566. Full Range Coaxial Horn. product specification SERIES. Performance Specifications 1

FH1566. Full Range Coaxial Horn. product specification SERIES. Performance Specifications 1 FH1566 Full Range Coaxial Horn Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 54 Hz to 20 khz SERIES Nominal Beamwidth 60 x 60 Transducers LF: 15.0 neodymium magnet

More information

HD1531 HIGH-DEFINITION POWERED LOUDSPEAKER. FEATURES: 15" 3-way High-Definition Powered Loudspeaker System APPLICATIONS

HD1531 HIGH-DEFINITION POWERED LOUDSPEAKER. FEATURES: 15 3-way High-Definition Powered Loudspeaker System APPLICATIONS HD1531 The HD1531 3-Way High-Definition Powered Loudspeaker delivers 1800W of peak system power via Class-D Fast Recovery amplification. Class-D amp design delivers up to 95% efficiency and, along with

More information

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR115

Overview. Features. Technical Data Sheet 1 / 7. Powered Loudspeaker DSR115 Overview The DSR115 is a compact, high-power 15" 2-way active loudspeaker system capable of achieving 136dB maximum peak SPL output. Equipped with high performance 48-bit DSP and top quality 1500W (LF

More information

W8L. touring and theatre. High performance three-way line array enclosure

W8L. touring and theatre.  High performance three-way line array enclosure features High power maximum SPL 136dB continuous, 142dB peak (single unit) Superior bass impact all horn design Wide bandwidth 50Hz-18kHz ± 3dB (single unit) True 90º (-6dB) horizontal mid and HF pattern

More information

PA261 PA261 SPEAKER. Vision Series

PA261 PA261 SPEAKER. Vision Series Vision Series The is an extremely versatile wide-dispersion, low-profile, two-way loudspeaker system offering substantial power and value for a variety of professional applications that include primary

More information

F1 Model 812 Flexible Array Loudspeaker

F1 Model 812 Flexible Array Loudspeaker F1 Model 812 Flexible Array Loudspeaker Product Description The Bose F1 Model 812 Flexible Array Loudspeaker is the first powered portable loudspeaker that lets you control its vertical coverage pattern.

More information

SA W (RMS), 10-Inch, two-way, passive KTV speaker 30. SA W (RMS), 12-Inch, two-way, passive KTV speaker 31

SA W (RMS), 10-Inch, two-way, passive KTV speaker 30. SA W (RMS), 12-Inch, two-way, passive KTV speaker 31 SINCE 1958 SPOT COLOUR FOR LIGHT BACKGROUND SPOT COLOUR FOR DARK BACKGROUND Black, Cool Grey 7 & Pantone 5405C Black, Cool Grey 7 & Pantone 5405C FANE PRO AUDIO LOUDSPEAKER SYSTEMS WWW.FANEPROAUDIO.COM

More information

AQ12. architectual. Compact, full-range system. features. applications. w w w w w

AQ12. architectual.   Compact, full-range system. features. applications. w w w w w features Wide 80 x 50 dispersion Rotatable HF horn Architecturally friendly styling 1st & 2nd fix all and ceiling brackets available Alternative textured paint colours to order applications Clubs, bars

More information

MK2399i Specifications

MK2399i Specifications DESCRIPTION Premium Performance Application Flexibility The MK2300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses

More information

PACX81. 1 OF of 6 PAGES PACX81 SPEAKER. Vision Series

PACX81. 1 OF of 6 PAGES PACX81 SPEAKER. Vision Series Vision Series The model (black) and W (white) are professional full-range, ultra-compact coaxial loudspeaker systems providing wide bandwidth and light weight in a low profile enclosure. The coaxial configuration

More information

RoomMatch Utility RMU108 TECHNICAL DATA SHEET. small-format under-balcony fill loudspeaker. Key Features. Technical Specifications

RoomMatch Utility RMU108 TECHNICAL DATA SHEET. small-format under-balcony fill loudspeaker. Key Features. Technical Specifications Key Features Award-winning RoomMatch sound now in smaller, 2-way, point-source designs for high-level foreground music, under-balcony, zone-fill and vocalrange floor monitor applications Bose EMB2 compression

More information

APP TECH DATA VOLUME ONE

APP TECH DATA VOLUME ONE 3.0 F300I VA SYSTEM 3.1 F300I ARCHITECTURAL SPECIFICATIONS The three-way full range loudspeaker system shall incorporate a 12-inch low frequency transducer, a 170 mm (nominal 7-inch) cone mid frequency

More information

140 W (560 W peak) 140 W (560 W peak) 75 W (300 W peak)

140 W (560 W peak) 140 W (560 W peak) 75 W (300 W peak) Key Features 90 x 40 coverage for medium-throw applications in auditoriums, worship facilities, performing arts centers, stadiums and arenas Mid/high-frequency loudspeaker designed for use in arrays with

More information

PA OF of 6 PAGES PA121 SPEAKER. Vision Series

PA OF of 6 PAGES PA121 SPEAKER. Vision Series Vision Series The is an extremely versatile wide-dispersion, two-way loudspeaker system offering substantial power and value for a variety of professional applications that include primary sound reinforcement

More information

PA OF of 6 PAGES PA151 SPEAKER. Vision Series

PA OF of 6 PAGES PA151 SPEAKER. Vision Series Vision Series The is an extremely versatile, wide-dispersion, two-way loudspeaker system offering substantial power and value for a variety of professional applications that include primary sound reinforcement

More information

AM404. architectual. Large format mid/high horn. features. applications

AM404. architectual.  Large format mid/high horn. features. applications features! 40º x 40º large format horn! High SPL mid/high install system! Lightweight composite construction! Port assisted, large format 10" (250mm) mid horn! 1.4" (35mm) exit high frequency horn! Constant

More information

See Connections section. 1 3/8 diameter.)

See Connections section. 1 3/8 diameter.) Eliminator Monitor Floor Monitor Exclusive Ring Mode Decoupling (RMD ) Integral stand adaptor PRO circuit provides HF driver protection Constant-directivity 80 x 55 horn Usable monitor angles of 50 and

More information

FA12ac. Self-Powered 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1

FA12ac. Self-Powered 12 inch Coaxial Loudspeaker. product specification. Performance Specifications 1 FA12ac Self-Powered 12 inch Coaxial Loudspeaker Performance Specifications 1 Operating Mode Self-Powered, w/ On-Board DSP Operating Range 2 46 Hz to 20 khz Nominal Beamwidth (rotatable) 90 x 45 Transducers

More information

WPL. Optimised Line Array Three-way, bi-amp line array element. Features. Applications. Benefits. LIVE SOUND + INSTALLATION

WPL. Optimised Line Array Three-way, bi-amp line array element. Features. Applications. Benefits.   LIVE SOUND + INSTALLATION Features High-performance large format line array All-horn, maximum-efficiency design Exceptional signature sonic performance Exemplary 90 horizontal constant directivity pattern control. External, dedicated,

More information

ArenaMatch AM20 DeltaQ array loudspeaker

ArenaMatch AM20 DeltaQ array loudspeaker TECHNICAL DATA PROFESSIONAL Product Overview Bose Professional ArenaMatch loudspeakers bring proven DeltaQ sound quality and flexibility to outdoor installations sports stadiums, arenas, outdoor entertainment

More information

W8CT. touring and professional. Dedicated longthrow high-mid / HF enclosure. features. applications

W8CT. touring and professional.  Dedicated longthrow high-mid / HF enclosure. features. applications features! Dedicated longthrow high-mid/hf enclosure! Very high SPL capability! Constant 55º horizontal dispersion! Load certified MAN flying points applications! Live sound open-air venues Throwing high

More information

ONLINE TUTORIALS. Log on using your username & password. (same as your ) Choose a category from menu. (ie: audio)

ONLINE TUTORIALS. Log on using your username & password. (same as your  ) Choose a category from menu. (ie: audio) ONLINE TUTORIALS Go to http://uacbt.arizona.edu Log on using your username & password. (same as your email) Choose a category from menu. (ie: audio) Choose what application. Choose which tutorial movie.

More information

APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT

APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS SINGLE 21, BAND-PASS SUBWOOFER KIT KEY FEATURES > High performance 21 subwoofer system. > Double Reflex Band-Pass design for high output, extended low frequency

More information

PRELIMINARY. group S. M i cro W e dge M W 15 Speci f i cations. 2-Way full-range stage monitor See NOTES TABULAR DATA for details FEATURES DESCRIPTION

PRELIMINARY. group S. M i cro W e dge M W 15 Speci f i cations. 2-Way full-range stage monitor See NOTES TABULAR DATA for details FEATURES DESCRIPTION FEATURES Highly coherent coaxial design (15 inch LF) Enhanced fidelity and power handling Upgraded transducers and crossover design Switchable single-amp/bi-amp modes Convenient input connector location

More information

W8LC Compact Line Array

W8LC Compact Line Array features High power - maximum SPL 129dB continuous, 135dB peak (single unit) Superior bass impact - all horn design Wide bandwidth - 60Hz-18KHz ± 3dB (single unit) True 90 (-6dB) horizontal mid and HF

More information

SRM350v2 PRECISION ACTIVE LOUDSPEAKER. FEATURES: 2-way bi-amplified, optimized powered loudspeaker system APPLICATIONS

SRM350v2 PRECISION ACTIVE LOUDSPEAKER. FEATURES: 2-way bi-amplified, optimized powered loudspeaker system APPLICATIONS SRM350v2 The Mackie SRM350v2 is a full-range, portable, powered loudspeaker system providing high-output, ultra-wide dispersion and low-distortion performance in a compact, lightweight design. Two Fast

More information

PRELIMINARY. group S. MicroWedge MW12 Specifications 2-WAY FULL-RANGE STAGE MONITOR FEATURES DESCRIPTION. CONFIGURATION Subsystem

PRELIMINARY. group S. MicroWedge MW12 Specifications 2-WAY FULL-RANGE STAGE MONITOR FEATURES DESCRIPTION. CONFIGURATION Subsystem FEATURES Highly coherent coaxial design (12-inch LF) Enhanced fidelity and power handling Upgraded transducers and crossover design Switchable single-amp/bi-amp modes Convenient input connector location

More information

touring and theatre Arrayable two-way compact trapezoid system

touring and theatre  Arrayable two-way compact trapezoid system features Arrayable compact trapezoid enclosure High SPL output capability 70º coverage angle Multi-laminate birch plywood construction Switchable active/passive operation Certified MAN quick-connect flying

More information

Professional Loudspeaker Systems and their Real World applications. High Performances Crossovers for. By Mario Di Cola, Audio Labs Systems,

Professional Loudspeaker Systems and their Real World applications. High Performances Crossovers for. By Mario Di Cola, Audio Labs Systems, High Performances Crossovers for Professional Loudspeaker Systems and their Real World applications By Mario Di Cola, Audio Labs Systems, Milano, Italia Senior Loudspeaker System Engineer mdicola@lisasystem.com

More information

Speaker Systems. Designed, engineered. and manufactured in Italy

Speaker Systems. Designed, engineered. and manufactured in Italy Speaker Systems Designed, engineered and manufactured in Italy EvoMaxX 3 > > More powerful Class D amplifiers > > Extra lighweight polypropylene cabinets > > Higher SPL for optimal audio reproduction >

More information

QS 350i QS SERIES. User Manual

QS 350i QS SERIES. User Manual QS 350i QS SERIES Contents Safety Precautions............................ 1 General Description........................... 3 Getting The Best From Your............... 4 Flying the.............................

More information

Tower Mains. A new breed of Main Monitors

Tower Mains. A new breed of Main Monitors Tower Mains A new breed of Main Monitors / TMS 36 In the search for precision it was decided to apply closed box designs only as they principally allow the best approximation to ideal transient behaviour.

More information

Blackline F10. professional. Compact two-way passive system. features. applications

Blackline F10. professional.  Compact two-way passive system. features. applications features!! Multi-angle birch ply enclosure! User rotatable 90 x 50 horn! High power output! Flexible mounting options! Five year limited warranty applications! Club sound reinforcement! Unobtrusive stage

More information

CKT-TF1020 Kit System

CKT-TF1020 Kit System CKT-TF1020 Kit System The CKT-TF1020 kit system is a compact 2-way speaker design suitable for stand or floor mounting. This system comprises the TF1020 10 (250mm) bass/midrange driver and CDX1-1445 compression

More information

AM10. architectual. Full-range weatherised enclosure. features. applications

AM10. architectual.   Full-range weatherised enclosure. features. applications features! Compact two-way passive system! Textured high-density polyurethane coating both internal and external! User rotatable 90º x 50º horn! High power output! Five year limited warranty applications!

More information

FL283. Dual 8 inch Subcardioid Line Array Module. product specification. Performance Specifications 1

FL283. Dual 8 inch Subcardioid Line Array Module. product specification. Performance Specifications 1 FL283 Dual 8 inch Subcardioid Line Array Module Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 54 Hz to 18.6 khz Nominal Beamwidth Horizontal: 90 Vertical: Array

More information

A C T I V E P A E N C L O S U R E S

A C T I V E P A E N C L O S U R E S A C T I V E P A E N C L O S U R E S P R O F E S S I O N A L P E R F O R M A N C E A N D P O W E R L 6 1 2 L 6 1 2 M L 6 1 5 L 1 2 1 2 L 1 2 1 5 A C T I V E P A E N C L O S U R E S LIVE! ACTIVE PA MONITORS

More information

Blackline F215. portable club. Two-way passive, vented trapezoidal enclosure with dual low frequency drivers

Blackline F215. portable club.   Two-way passive, vented trapezoidal enclosure with dual low frequency drivers features! Very high SPL from a full range passive enclosure! Extended low frequency performance from dual 15" drivers! Dedicated low distortion bass-mid driver! User rotatable 80 x 50 horn! 1.4" (35mm)

More information

PROFESSIONAL. EdgeMax EM90 and EM180 In-Ceiling Loudspeakers. Design Guide

PROFESSIONAL. EdgeMax EM90 and EM180 In-Ceiling Loudspeakers. Design Guide PROFESSIONAL EdgeMax and In-Ceiling Loudspeakers Design Guide Contents EdgeMax Loudspeaker Overview. 3 Comparison of In-Ceiling and Surface Mounted Loudspeaker Performance. 3 EdgeMax Loudspeaker Performance.

More information

ED120A 12 (305mm), 2-way, Full-range, CORE Processed, Powered, Loudspeaker System

ED120A 12 (305mm), 2-way, Full-range, CORE Processed, Powered, Loudspeaker System KEY FEATURES Powered two-way point source 12 woofer, 1.4 HF compression driver 96KHz / 4 bit floating point CORE processing with PRONET remote control Digitally controlled Class D amplifier module with

More information

Application Guide. AcousticPerformance Series Loudspeakers

Application Guide. AcousticPerformance Series Loudspeakers Application Guide AcousticPerformance Series Loudspeakers Rev. B, March 2017 THE ACOUSTICPERFORMANCE SERIES. THE NAME SAYS IT. The highly versatile AcousticPerformance Series comprises six models: three

More information

X:SIDER. The guidelines of the project are high power, fine tuning, endurance, care for details and high fidelity in any situation.

X:SIDER. The guidelines of the project are high power, fine tuning, endurance, care for details and high fidelity in any situation. X:SIDER VERSE X:SIDER is a sound system intended for many different situations. It fits in large and medium spaces, whether you need sound power, quality, and flexibility. The guidelines of the project

More information

StageSource L2m Compact, 2-Way Powered PA Speaker with Studio-Quality Sound

StageSource L2m Compact, 2-Way Powered PA Speaker with Studio-Quality Sound StageSource L2m StageSource L2m combines multi function design, powerful DSP and precision components to deliver the perfect blend of performance and scalability in a compact package for musicians on the

More information

UBL SOUND POWER M SERIES

UBL SOUND POWER M SERIES UBL SOUND POWER M SERIES As the expertise expected of the working musician becomes more complex, and the performance standards demanded by audiences become ever more sophisticated, JBL is continuously

More information

Description. Applications

Description. Applications Xw15 X-Array TM Two-Way, Full-Range Floor Monitor EVX-155 woofer with increased LF output and low distortion New DH6, 1.4-inch compression driver for maximum HF output and low distortion Rugged 13-ply

More information

VX 8.2. Product Description. Features. Applications

VX 8.2. Product Description. Features. Applications Product Description Conceived, engineered and built with precision in the United Kingdom, VX Series represents the latest evolution of Tannoy s core philosophies in professional loudspeaker design. VX

More information

WT2. touring and theatre. Arrayable two-way compact theatre enclosure

WT2. touring and theatre.   Arrayable two-way compact theatre enclosure features Arrayable compact trapezoid enclosure High SPL output capability 70º coverage angle Multi-laminate birch plywood construction Switchable active/passive operation Certified MAN quick-connect flying

More information

EQUIVALENT THROAT TECHNOLOGY

EQUIVALENT THROAT TECHNOLOGY EQUIVALENT THROAT TECHNOLOGY Modern audio frequency reproduction systems use transducers to convert electrical energy to acoustical energy. Systems used for the reinforcement of speech and music are referred

More information

RoomMatch RM9060 TECHNICAL DATA SHEET. array module loudspeaker. Key Features. Product Overview. Technical Specifications

RoomMatch RM9060 TECHNICAL DATA SHEET. array module loudspeaker. Key Features. Product Overview. Technical Specifications Key Features Concert-quality sound New Bose patented technologies combine to provide audio quality equaling that of the best concert-sound systems, in a fixed-installation format RoomMatch waveguide technology

More information

SETTING THE STANDARDS FOR STADIUM SOUND

SETTING THE STANDARDS FOR STADIUM SOUND SETTING THE STANDARDS FOR STADIUM SOUND The STADIA100 LA range comprises three loudspeaker modules of very similar dimensions but identical horizontal directivity (100 ) and which offer a choice of 10,

More information

CKT-TF1225 System. Components System Bass Driver Compression Horn Crossover CKT-TF1225 TF1225 CDX H CX-TF1225 CELESTION CKT-TF1225

CKT-TF1225 System. Components System Bass Driver Compression Horn Crossover CKT-TF1225 TF1225 CDX H CX-TF1225 CELESTION CKT-TF1225 CKT-TF1225 System The CKT-TF1225 system is a medium sized 2-way speaker design suitable for stand or floor mounting. This system comprises the TF1225 12 (300mm) bass/midrange driver and CDX1-1745 compression

More information

V12. Product Description. Features. Applications

V12. Product Description. Features. Applications Product Description A premium quality installation loudspeaker, the V2 combines high power handling, high efficiency and low distortion into a compact solution for class leading music and speech reproduction

More information

Panaray 402 Series II TECHNICAL DATA SHEET. loudspeaker. Key Features. Product Overview. Technical Specifications

Panaray 402 Series II TECHNICAL DATA SHEET. loudspeaker. Key Features. Product Overview. Technical Specifications Key Features Articulated Array design provides wide 120 x 60 coverage to deliver voice and music reproduction over a broad dispersion area Four Bose 4.5" (114 mm) full-range drivers for unsurpassed natural

More information

Elevation Series Synergy Horn Line Array Loudspeaker Enclosure

Elevation Series Synergy Horn Line Array Loudspeaker Enclosure Elevation Series Synergy Horn Line Array Loudspeaker Enclosure Features: Paraline High Frequency Horn Element (patent pending) Highly efficient Synergy Horn Design (patent pending) 10 Vertical Directivity

More information

MB12 / MB12 WR TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications

MB12 / MB12 WR TECHNICAL DATA SHEET. modular bass loudspeaker. Key Features. Product Overview. Technical Specifications Key Features Low-frequency reinforcement for Bose LT arrays and other subwoofer applications that require 4-28 Hz bass response Front-loaded tapered transmission line design provides peakfree extended

More information

datasheet THL-4.3 HILIGHT SERIES ENGINEERING FEATURES APPLICATIONS Controlled dispersion Seamless mid range Ultra-low distortion Sound contracting

datasheet THL-4.3 HILIGHT SERIES ENGINEERING FEATURES APPLICATIONS Controlled dispersion Seamless mid range Ultra-low distortion Sound contracting HILIGHT SERIES ENGINEERING INFORMATION datasheet THL-4.3 The THL-4.3 is a bi-amped 3-way full range loudspeaker enclosure incorporating Turbosound s unique loading principles in a particularly powerful

More information

TOA SPEAKER SYSTEM CONSTANT DIRECTIVITY HORN LE-M124/LE-M94/LE-M64/LE-M42

TOA SPEAKER SYSTEM CONSTANT DIRECTIVITY HORN LE-M124/LE-M94/LE-M64/LE-M42 TOA SPEAKER SYSTEM CONSTANT DIRECTIVITY HORN LE-M124/LE-M94/LE-M64/LE-M42 DESCRIPTION The LE Series constant directivity horns employ original TOA technology to meet stringent professional standards that

More information

FLS inch Subcardioid Subwoofer. product specification. Performance Specifications 1

FLS inch Subcardioid Subwoofer. product specification. Performance Specifications 1 FLS115 15 inch Subcardioid Subwoofer Performance Specifications 1 Operating Mode Single-amplified w/ DSP Operating Range 2 31 Hz to 135 Hz Nominal Beamwidth Subcardioid (6 db rear rejection) within operating

More information