Installation Instructions

Size: px

Start display at page:

Download "Installation Instructions"

Willa George
5 years ago
Views:

Installation Instructions GRS-U Instructions d installation Installationsanweisungen Instrucciones de instalación Istruzioni per l installazione Installatie-instructies インストール手順安装指示 Guest Room odular

es appareils doivent être installés par un électricien diplômé conformément à tous les codes et réglementations électriques et de construction nationaux et locaux.

1 Installation Instructions GRS-U Instructions d installation Installationsanweisungen Instrucciones de instalación Istruzioni per l installazione Installatie-instructies インストール手順安装指示 Guest Room odular ontroller Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations. es appareils doivent être installés par un électricien diplômé conformément à tous les codes et réglementations électriques et de construction nationaux et locaux. Die Geräte sind von einem qualifizierten Elektriker in Übereinstimmung mit allen geltenden Vorschriften zu installieren. os dispositivos deben ser instalados por un electricista calificado y cumpliendo todas las normas y regulaciones, tanto nacionales como locales, sobre instalaciones eléctricas y obras. I dispositivi devono essere installati da un elettricista qualificato in conformità con le norme locali e nazionali vigenti in materia di costruzioni edilizie e installazione di impianti elettrici. De apparaten moeten worden aangebracht door een gekwalificeerde elektricien en in overeenstemming met alle nationale en plaatselijke elektriciteits- en bouwvoorschriften. 装置を取り付ける際は資格のある電気技師に依頼し国および地域の電気および建設に関するすべての法令に従ってください根据国家 / 地区及当地的电气与建筑规范和法规, 该设备必须由有资质的电工进行安装. X 4 X 4 43 mm (6.97 in) 473 mm (8.62 in) 500 mm (9.69 in) RJ45 X mm (9.6 in) 286 mm (.26 in) 320 mm (2.60 in) 07 mm (4.2 in) 2 IE Pollution Degree II 40 (04 F) 90% 0 (32 F)

2 3 A 3 B 4 2V 24V 5 / hannel (H) oad Type H9 - H3 H4, H6 H5, H7 H8 - H9 OUT - OUT3 General Use Resistive 6 A, 277 V 6 A, 277 V 6 A, 277 V (/O) 6 A, 277 V A, 30 V 4 A, 250 V (/) A, 30 V A, 30 V A, 30 V 0 A, 20 V 4.3 A, 277 V 0 A, 20 V 4.3 A, 277 V Electronic Driver otor 5 A, 20 V 3 A, 277 V 9.8 FA ( /2 HP), 20 V 8 FA ( HP), 240 V 9.8 FA ( /2 HP), 20 V (/O) 8 FA ( HP), 240 V (/O) 5 A, 20 V 3 A, 277 V TV Rating TV-8, 20 V TV-5, 20 V TV-5, 20 V TV-8, 20 V Inrush urrent 65 A 00 A 00 A 65 A /Group H-H4* 0 A H5-H8* 0 A H0-H3 6 A H8-H9 6 A GRS-U 32 A * Ratings for H-H8 are based on rating. E/TE dimming supply must be from the same phase as the controller supply 2

3 6 8 5 mm V ± 0% H-4--I H-4--I H--OUT H--OUT H2--OUT H2--OUT H3--OUT H3--OUT H4--OUT H4--OUT H5-8--I H5-8--I H5--OUT H5--OUT H6--OUT H6--OUT H7--OUT H7--OUT H8--OUT H8--OUT H9-I H9-OUT H0-3-I H0-OUT H-OUT H2-OUT H3-OUT H4-I H4-OUT H5-I H5A-OUT H5B-OUT 0+ AWG 0.5 m 4.4 b-in 2/24 V 200 ma DX Tx Port Dyet RS-485 Room connection D GD +V D GD SHD RJ45 Socket +V 2/24 V D 50 ma GD Port 2 SHD Dyet RS-485 Floor connection U924 Dry contact inputs 2 X RJ45 Sockets I I I2 I3 I4 µp H-4--I H-4--I H5-8--I H5-8--I /DA+ H /DA- /DA+ H2 /DA- /DA+ H3 /DA- /DA+ H4 /DA- /DA+ H5 /DA- /DA+ H6 /DA- /DA+ H7 /DA- /DA+ H8 /DA- H9--I H9-OUT /: POWER DA+/DA-: ASS or ASS 2 H6-I H6-OUT H7-I H7A-OUT H7B-OUT H8-9-I H8-OUT H9-OUT 7 30 V A Dry contact outputs Room address OUT OUT2 OUT3 H0-3--I H0-OUT H-OUT H2-OUT H3-OUT H4--I H4-OUT H5--I H5A H5B H6--I H6-OUT H7--I H7A H7B POWER ASS / ASS mm 2 2+ AWG 0.5 m 4.4 b-in DRY OTAT OUTPUTS OUT OUT 2 OUT 3 IE Overvoltage ategory III H8-9--I H8-OUT H9-OUT 3

4 9 DG02 x 2 A curtain DGF02 x 2 A fan DGR204 2 x 4 A relay DGB200 2 H ballast DGT04 x 4 A Trailing Edge dimmer DG202 2 x 2 A eading Edge dimmer DGT202 2 x 2 A Trailing Edge dimmer DG05 x 5 A eading Edge dimmer DG402 4 x 2 A eading Edge dimmer DGT402 4 x 2 A Trailing Edge dimmer 0 2 A DG02 x 2 A curtain OUT- OUT- I- OUT- I- OUT- H-4--I H-4--I /DA+ H /DA H A /DA+ H 2 /DA H B oad Type General use otor x per hannel 2 A, 230 V 4.4 FA ( /6 HP), 20 V 4.9 FA ( /2 HP), 230 V /DA+ H 3 /DA /DA+ H 4 /DA 4

5 2 B DGF02 x 2 A fan HI ED OW OFF OUT- OUT- OUT- OUT- H-4--I H-4--I I- I- /DA+ H /DA /DA+ H 2 /DA oad Type otor x per hannel 400 VA, 230 V /DA+ H 3 /DA /DA+ H 4 /DA ot suitable for 20 V (ot U listed) 2 DGR204 2 x 4 A relay OUT- OUT- OUT2- OUT2- H-4--I oad Type General use agnetic with Halogen Electronic Driver per hannel 4 A, 230 V 600 W, 20 V 00 W, 230 V 2 A, 20 V 4 A, 20 V 3 A, 230 V I- I- H-4--I /DA+ H /DA /DA+ H 2 /DA /DA+ H 3 /DA /DA+ H 4 /DA odule oad 5 A 2 D DGB200 2 H ballast OUT-DA+ OUT-DA- OUT2-DA+ OUT2-DA- Protocol DAI/-0V/DSI DAI/-0V/DSI A B -0 V DSI/DAI -0 V DSI/DAI H-4--I H-4--I A ontrol hannel Ratings /DA+ H /DA /DA+ H 2 /DA DAI Broadcast/ DSI 5/H 3 V Guaranteed 0 ma, aximum 250 ma Insulation: basic 0 /DA+ H 3 /DA /DA+ H 4 /DA B -0 V Sink 0 ma / Source 0 ma 5

6 2 E DGT04 x 4 A TE dimmer OUT- OUT- OUT- OUT- odule supply must be on same phase as controller supply H-4--I H-4--I I- I- /DA+ H /DA oad Type Electronic Driver per hannel 4 A, 20 (U) / 230 V 4 A, 20 (U) / 230 V ot compatible with magnetic transformers. Apply de-rating for electronic and ED loads. /DA+ H 2 /DA /DA+ H 3 /DA /DA+ H 4 /DA 2 F DG202 2 x 2 A E dimmer OUT- OUT- OUT2- OUT2- odule supply must be on same phase as controller supply H-4--I oad Type agnetic with Halogen I- per hannel 2 A, 20 / 230 V 2 A, 20 / 230 V I- H-4--I /DA+ H /DA /DA+ H 2 /DA /DA+ H 3 /DA Electronic Driver* 2 A, 20 / 230 V /DA+ H 4 /DA *can be limited by load capacitance. Apply de-rating for electronic and ED loads. 2 G DGT202 2 x 2 A TE dimmer OUT- OUT- OUT2- OUT2- odule supply must be on same phase as controller supply H-4--I I- I- H-4--I /DA+ H /DA oad Type Electronic Driver per hannel 2 A, 20 (U) / 230 V 2 A, 20 (U) / 230 V /DA+ H 2 /DA /DA+ H 3 /DA /DA+ H 4 /DA ot compatible with magnetic transformers. Apply de-rating for electronic and ED loads. 6

7 2 H DG05 x 5 A E dimmer OUT- OUT- OUT- OUT- OUT- OUT- OUT- OUT- odule supply must be on same phase as controller supply H-4--I I- I- I2- I2- H-4--I oad Type per hannel 5 A, 20 / 230 V /DA+ H /DA /DA+ H 2 /DA agnetic with 5 A, 20 / 230 V Halogen Electronic 5 A, 20 / 230 V Driver* *can be limited by load capacitance Apply de-rating for electronic and ED loads. Do not place in the middle position. /DA+ H 3 /DA /DA+ H 4 /DA 2 I DG402 4 x 2 A E dimmer OUT- OUT- OUT2- OUT2- OUT3- OUT3- OUT4- OUT4- odule supply must be on same phase as controller supply H-4--I I- I- I2- I2- H-4--I /DA+ H /DA oad Type agnetic with Halogen Electronic Driver* per hannel 2 A, 20 / 230 V 2 A, 20 / 230 V 2 A, 20 / 230 V /DA+ H 2 /DA /DA+ H 3 /DA /DA+ H 4 /DA *can be limited by load capacitance Apply de-rating for electronic and ED loads. 2 J DGT402 4 x 2 A TE dimmer OUT- OUT- OUT2- OUT2- OUT3- OUT3- OUT4- OUT4- odule supply must be on same phase as controller supply H-4--I I- I- I2- I2- H-4--I /DA+ H /DA oad Type per hannel 2 A, 20 (U) / 230 V /DA+ H 2 /DA /DA+ H 3 /DA Electronic Driver 2 A, 20 (U) / 230 V /DA+ H 4 /DA ot compatible with magnetic transformers. Apply de-rating for electronic and ED loads. 7

8 3 4 A H4-I H4-OUT H5-I H5A-OUT H5B-OUT H6-I H6-OUT H7-I H7A-OUT H7B-OUT 4 B H4-I H4-OUT H5-I H5A-OUT P H5B-OUT H6-I H6-OUT H7-I H7A-OUT H7B-OUT P 5 SEV/ASS 2 POWER/ASS SEV/ASS 2 ASS 2 ASS ASS 2 ASS ASS 2 8

9 96 PORT 2 FOOR PORT 2 FOOR PORT 2 FOOR PORT ROO PORT ROO Dyet RS-485 Dyet RS-485 DX DX 7 O DX 52 OFF DX 52 9

10 8 2.5 mm 2 GD DX Tx 2+ AWG 9 A ROO 0.5 m 4.4 b-in DX SWITH +2/24 V 2.5 mm 2 2 A 2+ AWG GD Dyet RS-485 B ROO SHD 0.5 m 4.4 b-in /A +2/24 V +2/24 V /A GD GD Dyet RS A FOOR 2 A Dyet RS-485 B FOOR +2/24 V GD SHD 2.5 mm 2 2+ AWG 0.5 m 4.4 b-in Dyet RS-485 /A +2/24 V +2/24 V /A GD GD Dyet RS-485 0

11 2 U924 DRY OTAT IPUTS < 20 m O OFF ROO ADDRESS 2 DRY OTAT OUTPUTS mm 2 Dyet RS AWG 0.5 m 4.4 b-in 23 5 mm 2 0+ AWG 0.6 m 5.5 b-in Refer to product label for Earth bar and eutral bar wire gauge and torque ratings

12 DX GD +V GD SHD RJ45 +V GD SHD I OUT OUT2 OUT3 O 0 V ma max. 0 V ma max. 30 V~/, A 30 V~/, A 30 V~/, A odule Attach label here odule 2 Attach label here odule 3 Attach label here odule 4 Attach label here Table oad Type General Use Electronic Ballast Standard Ballast TV Rating Table 2 oad Type General Use otor aximum ratings 6 A, 277 V~ 200 W, 277 V~ 5 A, 20 V~ 3 A, 277 V~ 2 A, 277 V~ TV-8, 20 V~ 6 A, 277 V~ (/O only) 4 A, 250 V~ (/ only) 0.5 HP, 20 V~ (/O only) HP, 250 V~ (/O only) = ot connected / = ormally closed /O = ormally open aximum ratings Attach expansion label here 20/230 V~ +0%/-5% 50/60 Hz Single Phase 0.7 A max. hannel rating refer Table hannel rating refer Table aximum group load 6 A hannel rating refer Table 2 hannel rating refer Table 2 hannel rating refer Table 2 hannel rating refer Table 2 hannel rating refer Table aximum group load 6 A and aintenance Instruction H-4--I H-4--I H2-/DA+ H-/DA+ H-/DA- H2-/DA- H3-/DA+ H3-/DA- H4-/DA+ H4-/DA- H5-8--I H5-8--I H5-/DA+ H5-/DA- H6-/DA+ H6-/DA- H7-/DA+ H7-/DA- H8-/DA+ H8-/DA- H9-I H9-OUT H0-3-I H0-OUT H-OUT H2-OUT H3-OUT H4-I H4-OUT H5-I H5A-OUT H5B-OUT H6-I H6-OUT H7-I H7A-OUT H7B-OUT H8-9-I H8-OUT H9-OUT GRS-U - HOTE ROO OTROER ontroller Supply Dry ontact Input/U924: mm2,(#26-6 AWG) Torque: 0.33 m (3.0 b-in) Dry ontact Output/Dyet: mm2 (#22-2 AWG) Torque: 0.5 m (4.4 b-in) ASS 2/ SEV OY FOOR ROO Dry contact Dry contact Dyet Port 2 Dyet Port outputs inputs U924 RS485 RS485 2x RJ45 Sockets V: Output 2/24 V, 50 ma +V: Output 2/24 V, 200 ma, : RS485, 3.3 V, : RS485, 3.3 V E: ASS or ASS2 IE: HAZARDOUS or SEV Terminals this side in-lb max. tightening torque odule Attach label here EERGEY IRUITS AUTIO: See Instruction anual for Installation, Operation, 27 The manufacturer is not responsible for dimmable lamp selection. Each lamp/dimmer combination must be tested for compatibility prior to installation. Federal ommunications ommission (F) ompliance otice: Radio Frequency otice This equipment has been tested and found to comply with the limits for a lass B digital device, pursuant to part 5 of the F Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. onsult the dealer or an experienced radio/tv technician for help. Any modifications not approved by the manufacturer of this device could void the user s authority to operate this device. Installation of a home and building automation and control system shall comply with HD The temperature limits and current-carrying capacities for the communication wires specified in HD shall not be exceeded. This lass B digital apparatus complies with anadian IES-003: A IES-3(B)/B-3(B). et appareil numerique de la classe B est conforme a la norme B- 003 du anada: A IES-3(B)/B-3(B). 209 Signify Holding. All rights reserved. Specifications are subject to change without notice. o representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips.V. All other trademarks are owned by Signify Holding or their respective owners. AZZ R7

DMC4. Installation Instructions DMC2-UL, DMC2-CE. Modular Controller

DMC4. Installation Instructions DMC2-UL, DMC2-CE. Modular Controller Installation Instructions DMC DMC2-UL, DMC2-CE Instructions d installation Installationsanweisungen Instrucciones de instalación Istruzioni per l installazione Installatie-instructies インストール手順安装指示 Modular