Maintenance/ Discontinued

Size: px
Start display at page:

Download "Maintenance/ Discontinued"

Transcription

1 PLL LSI with Built-In Prescaler Overview The is a CMOS LSI for a phase-locked loop (PLL) frequency synthesizer with serial data parameter input. It consists of a two-coefficient prescaler, variable frequency divider, phase comparator, and charge pump. It offers high-speed operation on a low power supply voltage (1.0 to 1.4 V) and low power consumption (1.65 mw for V DD =1.1 V, F IN = R IN =90 MHz). Other features include intermittent operation by the power save (PS) control signal and high-speed pull-in that rapidly corrects the phase differences occurring at the start of operation. It also offers two choices for the reference signal: selfexcited operation using the built-in inverter amplifier or use of an external, separately excited oscillator. Features Low power supply voltage: V DD =1.0 to 1.4V Low power consumption: 1.65mW(V DD =1.10V, F IN =90MHz, R IN =90MHz) High-speed operation: F IN =90MHz, R IN =90MHz (V DD =1.1V) Frequency dividing ratios in reference frequency dividing stage 6 to 131,070 for RSL at "H" level (even number setting is available) 272 to 131,071 for RSL at "L" level Frequency dividing ratios for comparator stage: 272 to 262,143 Power supply pin for built-in charge pump V CP =2.5 to 3.2V Output monitor pins for both comparator and reference frequency dividing stages Pin Assignment X IN X OUT FV V DD D OP V SS V CP F IN (TOP VIEW) SSOP016-P-0225 R IN RSL LC FR PS includes following four Product lifecycle stage.

2 Block Diagram RSL R IN X IN X OUT Swallow counter Prescaler and phase adjustment PS Switching circuit 3-bit counter F IN 13-bit programmable counter Prescaler Phase adjustment 17-bit latch 18-bit shift register Data control 18-bit latch Control 14-bit programmable counter Swallow counter Prescaler and phase adjustment V DD V SS FR V CP D OP LC FV Phase comparator includes following four Product lifecycle stage.

3 Pin Descriptions Pin No. Symbol Function Description 1 X IN Crystal oscillator connection pins: 2 X OUT X IN =Oscillator circuit input pin; (X IN is attached to a pull-up resistor when the PS or RSL pin is at "L" level.) X OUT =Oscillator circuit output pin. 3 FV Frequency divider output signal in comparator stage. 4 V DD Power supply Phase comparator input monitor. 5 D OP Low-pass filter connection pin. Use a passive filter. 6 V SS Ground 7 V CP Power supply pin for built-in charge pump 8 F IN Frequency divider input pin in comparator stage. 9 Shift register clock input pin. 10 Shift register data input pin. The chip latches data at the rising edge of the signal. The final two bits in the data select the write latch: "11" for R-latch; "01" for N-latch. 11 Load enable signal input pin. This is the latch-write-enable signal. It is at "H" level for write. 12 PS Power save control signal input pin. "H" level input starts the frequency divider and places the chip in operational mode. "L" level input places the chip in standby mode, which saves power. The chip switches the internal charge pump output to the H-z state and the loop is opened. 13 FR Reference frequency divider output signal. Phase comparator input monitor. 14 LC Charge pump control signal output pin. When frequency divider operation is stopped, this pin is at "L" level, the internal charge pump output is in the high-impedance state, and the loop is opened. 15 RSL Reference signal selection pin. "H" level selects self-excited oscillator (X IN and X OUT ). "L" level selects external oscillator (R IN ). 16 R IN External reference oscillation input pin. This pin is attached to a pull-up resistor when the PS pin is at "L" level or the RSL pin is at "H" level. includes following four Product lifecycle stage.

4 Frequency Dividing Data Settings 1) Comparator side frequency dividing data FV = F IN {(16 N) + A} 2) Reference side frequency dividing data a) Low-speed operation (RSL pin at "H" level, using X IN ) FR = X IN R b) High-speed operation (RSL pin at "L" level, using R IN ) FR =R IN {(16 NR) + AR} where F IN : Comparator side frequency R IN : High-speed reference frequency X IN : Low-speed reference oscillator frequency FV : Comparator frequency divider stage output frequency FR : Reference frequency divider stage output frequency N : Setting for 14-bit programmable counter on comparator side A : Setting for 4-bit swallow counter on comparator side R : Setting for 17-bit programmable counter on low-speed reference side NR : Setting for 13-bit programmable counter on high-speed reference side AR : Setting for 4-bit swallow counter on low-speed reference side (Note that N should be greater than A; NR, greater than AR.) N-Side Latch Data R-Side Latch Data Low-speed operation High-speed operation 13 bits 14 bits 4 bits LSB Programmable counter setting (N) Programmable counter setting (NR) 17 bits Programmable counter setting (N) Swallow counter setting (A) 4 bits Swallow counter setting (AR) includes following four Product lifecycle stage. LSB LSB

5 Note on Setting Frequency Dividing Data Input 1) Frequency dividing data input (1) Reference side Data input direction LSB Control bits (2) Comparating side *1 17-bit frequency dividing data Data input direction Notes 1.*1: Preceding the input of the frequency dividing data for the comparating side, input test pattern consisting of three "L" level bits to produce normal operation. Never use any other pattern. 2. When the power is first applied, internal operation remains in an unstable state until data is written. To eliminate the risk of excessive current consumption, keep the PS pin at "L" level. 3. When the power is first applied, the data settings are indeterminate. Always write data to the chip before starting operation. 4. Enter the data to fill the entire latch: Reference side: 19 bits (17 bits for the frequency divider setting and 2 for control bits) Comparating side: 23 bits (3 bits for the test pattern, 18 bits for the frequency divider setting, and 2 for control bits) 5. Drive the pin at "L" level while writing the data. 6. "H" level input from the pin causes the chip to read the data only when the pin and the pin are both at "L" level. 7. Writes are possible when the PS pin is either "H" or "L" level. 8. Input the data first. 9. The data are inputted at the rising edge of the signal. 1 bit Control bits 1 bit 1 bit 1 bit "L" Frequencey Write selection dividing stage "H" level selection "H" level bit test data 3 bits "L" level LSB 18-bit frequency dividing data LSB Frequencey Write selection dividing stage "H" level selection "L" level includes following four Product lifecycle stage. "L"

6 Absolute Maximum Ratings Parameter Symbol Rating Unit Power supply voltage V DD 0.3 to +3.0 Power supply voltage V CP 0.3 to +4.0 Input pin voltage V I V SS 0.3 to V DD +0.3 Output pin voltage V O V SS 0.3 to V DD +0.3 Power dissipation P D 20 mw Operating ambient temperature T opr 10 to +60 Storage temperature T stg 55 to +125 Operating Conditions V SS =0V, Ta= 10 to +60 C Parameter Symbol Test Conditions min typ max Unit Power supply voltage V DD V Power supply voltage V CP V Electric Characteristics V CP =2.5V, Ta= 10 to +60 C Parameter Symbol Test Conditions min typ max Unit Power supply pin V DD V DD =1.1V Power supply current I DD F IN =90MHz, RIN=90MHz, 2.3 ma PS="H", RSL="L" Input Pins,,, and PS V DD =1.0 to 1.4 V I Dstop PS="L" (Power Save operation) 3 µa "H" level input voltage V IH V DD 0.2 V DD V "L" level input voltage V IL V SS 0.2 Input leakage current I LI ±1.0 µa Input Pins F IN, R IN V DD =1.0 to 1.4V Input voltage V IN 0.4 V p-p Input current I IF Pull-up resistor is present 10 µa (PS="L") Input leakage current I LIF V IN =0 or V DD (PS="H") ±20 µa Maximum operating frequency F INMAX V IN =0.4 V p-p 90 MHz R INMAX Minimum operating frequency F INMIN V IN =0.4 V p-p 1.0 MHz Input Pin X IN V DD =1.0 to 1.4V R INMIN Input voltage V IN 0.4 V p-p Input current I IX Pull-up resistor is present ma (PS="L") includes following four Product lifecycle stage. Input leakage current I LIX V IN =0 or V DD 5.0 µa Maximum operating frequency X INMAX V IN =0.4 V p-p 15 MHz V C

7 Electrical Characteristics (continued) V CP =2.5V, Ta= 10 to +60 C Parameter Symbol Test Conditions min typ max Unit Crystal Oscillator Pins X IN, X OUT V DD =1.0 to 1.4V Crystal oscillator frequency f Xtal 15 MHz Output Pins FV, FR, LC V DD =1.0 to 1.4V "H" level output voltage V OH I OH = 10µA V DD 0.3 V DD V "L" level output voltage V OL I OL =10µA V SS 0.3 Output Pin X OUT V DD =1.0 to 1.4V "H" level output voltage V XOH I XOH = 100µA V DD 0.3 V DD V "L" level output voltage V XOL I XOL =100µA V SS 0.3 Output Pin D OP V DD =1.0 to 1.4V "H" level output voltage I DOH V Dop =V CP 0.3V 100 µa "L" level output voltage I DOL V Dop =0.3V 100 Output leakage current I LOH V Dop =V CP 2.0 Output leakage current I LOL V Dop =0.0V 2.0 V DD =1.0 to 1.4V Setup time *1 t sul 500 ns t su2 500 ns Hold time *1 t H 500 ns Note*1: The following timing chart shows the setup and hold times. 50% t su1 t H t su2 Usage Note Be particularly careful with this product as it is more sensitive on the static electricity damage than most of our other products. includes following four Product lifecycle stage.

8 Application Circuit Example 0.22µF *1 Loop filter VF V DD =1.0V to 1.4V 10kΩ 100Ω VCO VCC 35kΩ 1µF 10µF V CP =3V 80 to 90MHz 390Ω 0.1µF 0.1µF 1000pF V CC =3V Amplifier X IN X OUT FV V DD D OP V SS V CP F IN R IN RSL LC FR PS Separately excited oscillator Intermittent operation control Frequency dividing data input Frequency dividing data input Frequency dividing data input includes following four Product lifecycle stage. *1 VCO characteristics may necessitate design revisions.

9 Package Dimensions (Unit: mm) SSOP016-P (0.45) ± ± ± ± ± ± ± ± SEATING PLANE ±0.1 0 to 10 includes following four Product lifecycle stage.

10 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. includes following four Product lifecycle stage.

Maintenance/ Discontinued

Maintenance/ Discontinued Operational Amplifier ANSSM CMOS single power supply Overview ANSSM is an operational amplifier with a single power supply by CMOS diffusion process. It has low current-consumption compared to general

More information

DATA SHEET. Part No. AN17821A

DATA SHEET. Part No. AN17821A DATA SHEET Part No. Package Code No. AN17821A HSIP012-P-0000E Publication date: November 2006 1 Contents Applications. 3 Package.... 3 Type.... 3 Application Circuit Example... 4 Block Diagram.... 4 Pin

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. AN17831A HSIP012-P-0000E planed Publication date: November 2006 1 Contents Applications. 3 Package.... 3 Type.... 3 Application Circuit Example... 4 Block Diagram....

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Mobile Communication AN8SSM Ripple filter IC Overview The AN8SSM is a ripple filter IC that rejects the ripple component superimposed on the regulator output. Use for the VCO bias of cellular phones

More information

Maintenance/ Discontinued

Maintenance/ Discontinued olyage Detector IC CMOS IC for oltage Detection Overview The are elements that monitor the power supply voltage supplied to microcomputers and other LSI systems and issue reset signals for initializing

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. SSIP003-P-0000S (Exclusive use for AN80xx) includes following four Product lifecycle stage. Publication date: October 2008 1 Contents Overview. 3 Features.. 3 Applications

More information

Maintenance/ Discontinued

Maintenance/ Discontinued AN Dual Operational Amplifier Overview The AN is a dual operational Amplifier with a phase compensation circuit built-in. It is suitable for application to various electronic circuits such as active filters

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN -W BTL audio power amplifier Overview The AN is an audio power amplifier IC with -ch output. The BTL (Balanced Transformer-Less) method can provide fewer external parts and

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. SOP008-P-0225G includes following four Product lifecycle stage. Publication date: October 2008 Contents Overview. 3 Features. 3 Applications. 3 Package.. 3 Type.. 3

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Small Signal Transistor Arrays UNA225 (UN225) Silicon PNP epitaxial planar type (4 elements) Silicon NPN epitaxial planar type (4 elements) For motor drives Features Small and lightweight Low power consumption

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Others 32-bit Shift Register atch Driver IC Overview The is an IC which iorporates a 32-bit shift register and a latch driver to meet high-speed operation low power consumption and high-density printout

More information

Maintenance/ Discontinued

Maintenance/ Discontinued This product complies with the RoHS Directive (EU 22/95/EC). Optoisolators CNCS7 (ON37) Optoisolator For isolated signal transmission Features High current transfer ratio: CTR > 5% High I/O isolation voltage:

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following four Product lifecycle stage. Publication date: October 2008 1 Contents Overview. 3 Features.. 3 Applications 3 Package. 3 Type....

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Optoisolators (Photocouplers) This product complies with the RoHS Directive (EU 22/95/EC). CNCS (ON33) Optoisolators Overview CNCS is a DIL type 4-pin single-channel optoisolator which is housed in a small

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Transmissive Photosensors (Photo lnterrupters) This product complies with the RoHS Directive (EU /95/EC). CNAK (ON) Photo lnterrupter For contactless SW and object detection Overview CNAK is an ultraminiature,

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for TV AN723 3-W BTL audio power amplifier Overview The AN723 is an audio power amplifier IC of -ch. output. In the BTL (balanced transformerless) method, fewer external parts and easier design for

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Zener Diodes Silicon planar type For constant voltage, constant current, waveform clipper and surge absorption circuit Features SS-Mini type 2-pin package (SSMini2-F) Low noise type V Z rank classified(v

More information

Maintenance/ Discontinued

Maintenance/ Discontinued AN, ANS General Purpose Long Interval Timers Overview The AN and ANS are ICs designed for general purpose long interval timers. They consists of an oscillator, frequency divider (flip-flop steps), output

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Infrared Light Emitting Diodes GaAs Infrared Light Emitting Diode For optical control systems This product complies with the RoHS Directive (EU 22/95/EC). Features High-power output, high-efficiency: P

More information

Maintenance/ Discontinued

Maintenance/ Discontinued This product complies with the RoHS Directive (EU 22/95/EC). Transistors Silicon NPN epitaxial planar type For low-frequency output amplification Complementary to 2SA1531 Features Low noise voltage NV

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following four Product lifecycle stage. Publication date: October 2008 1 DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Optoisolators (Photocouplers) This product complies with the RoHS Directive (EU 22/95/EC). CNZ373 (ON373) Optoisolators Overview The CNZ373 of optoisolators consist of a GaAs infrared LED which is optically

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN74 Dual. Audio Power Amplifier Overview The AN74 is an integrated circuit designed for power amplifier of. (9V, 4Ω) output. Stereo operation is enabled due to incorporating two

More information

Discontinued AN W 2 (18 V, 8 Ω) Power Amplifier with Mute Function and Volume Control

Discontinued AN W 2 (18 V, 8 Ω) Power Amplifier with Mute Function and Volume Control ICs for Audio Common Use 4.0 W 2 (8 V, 8 Ω) Power Amplifier with Mute Function and Volume Control Overview The is a monolithic integrated circuit designed for 4.0 W (8 V, 8 Ω) output audio power amplifier.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for FM/AM Tuner FM-IF, NC, MPX IC for car radio Overview The is an IC having FM-IF, NC and MPX functions for car radio. A tuner block of car radio can be constructed in combination with the AN7289NFBQ/NSC.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use ANN Dual.W Audio Power Amplifier Overview The ANN is an integrated circuit designed for power amplifier of.w (.V, Ω) output. Stereo operation is enabled due to incorporating two

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN7555Z BTL output power IC for car audio Overview The AN7555Z is an audio power IC developed as the sound output of car audio (35 W 4-channel). It has realized the voltage gain

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for TV AN22 Dual -W BTL audio power amplifier Overview AN22 is an audio power amplifier IC for the stereo system. In the BTL (balanced transformerless) method, fewer external parts and easier design

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN9 Dual.W Audio Power Amplifier Overview The AN9 is an integrated circuit designed for low distortion, low noise and low power dissipation audio set of.w (.V, Ω) output. Stereo

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN7395K, AN7395S Spatializer IC (3-D Surround) Overview Spatializer Audio Processor is a signal processing technology, monopolized by Desper Products, Inc., that was developed

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Cassette, Cassette Deck AN751K, AN751SC Dual Pre-Amplifier ICs for Hi-Fi Cassette Deck Overview The AN751K and the AN751SC are the single chip ICs designed for pre-amp. for stereo cassette (double

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN752 Dual -W BTL audio power amplifier Overview The AN752 is an audio power amplifier IC for stereo system. The BTL (Balanced Transformer-Less) method can provide fewer external

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. Package Code No. AN781NSP SP-SUA Publication date: October 008 1 Contents Overview. Features.. Applications Package. Type.... Block Diagram.... 4 Pin Descriptions. 5 Absolute Maximum

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for / Tuner AN77, AN77S Tuner, / IF Amplifier Circuit Overview The AN77 and the AN77S are the ICs designed for Hi-Fi stereo tuner. They are functioned with stop signal pin besides the AN7S function.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for / Tuner AN7289NSC -FE+ IC for car radio Overview The AN7289NSC is an IC having -FE+ functions for car radio. A tuner block of car radio can be constructed by combination of this IC and the AN7293NSC

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Infrared Light Emitting Diodes This product complies with the RoHS Directive (EU 22/95/EC). LNA2WL (LN57) GaAs Infrared Light Emitting Diode For optical control systems Features High-power output, high-efficiency:

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Compact Disc/CD-ROM Player AN8472SA Spindle motor driver IC for optical disk Overview The AN8472SA is a high performance IC suited for driving a spindle motor of an optical disk such as CD-ROM,

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Infrared Light Emitting Diodes This product complies with the RoHS Directive (EU 22/95/EC). LNA293L (LN66A) GaAs Infrared Light Emitting Diode For remote control systems Features High-power output, high-efficiency:

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Vertical Driver SI for Video Camera CCD Area Image Sensor Overview The is a vertical driver SI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction

More information

Maintenance/ Discontinued

Maintenance/ Discontinued MN Series MN 8-Stage Ultra Low Voltage Operation BBD for Audio Signals Overview The MN is a 8-stage ultra low voltage operation BBD variable delay line in audio frequency range. The device operates on

More information

Maintenance/ Discontinued

Maintenance/ Discontinued N00, N00S Overvoltage Protective Circuits Built-in Switching Power Supply Overview The N00 and the N00S enables high-speed control up to 00 khz and have various protective functions for overcurrent, overvoltage,

More information

LNJ757W86RA. High Bright Surface Mounting Chip LED. ESS Type. Absolute Maximum Ratings T a = 25 C. Lighting Color

LNJ757W86RA. High Bright Surface Mounting Chip LED. ESS Type. Absolute Maximum Ratings T a = 25 C. Lighting Color High Bright Surface Mounting Chip LED ESS Type Absolute Maximum Ratings T a = 5 C Power dissipation P D 75 mw Forward current I F 0 ma Pulse forward current * I FP 70 ma Reverse voltage V R 5 V Operating

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Is for Audio ommon Use AN74 Dual 3. W Audio Power Amplifier Overview The AN74 is a monolithic integrated circuit designed for dual audio power amplifier of portable radio cassette. Features Audio output

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN Dual Channel BTL Power Amplifier Overview AN is a monolithic integrated circuit designed for. W ( V, Ω) output audio power amplifier.it is a dual channel BTL IC suitable for

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Compact Disc/CD-ROM Player AN8481SB Spindle motor driver IC for optical disk Overview The AN8481SB is a high performance IC suited for driving a spindle motor of an optical disk such as CD-ROM,

More information

FK Silicon N-channel MOS FET. For switching circuits. Overview. Package. Features. Marking Symbol: CV. Packaging

FK Silicon N-channel MOS FET. For switching circuits. Overview. Package. Features. Marking Symbol: CV. Packaging FK6 Silicon N-channel MOS FET For switching circuits Overview FK6 is N-channel small signal MOS FET employed small size surface mounting package. Features High-speed switching Low drain-source ON resistance:

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for T AN5177NK IF/SIF Signal Processor IC for T and CR Overview The AN5177NK is a IF/SIF signal processor IC for T and CR. Features PLL full-synchronization detection An equalization amplifier for

More information

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification.

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification. DMG24 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) Unit: mm For general amplification Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Cassette, Cassette Deck AN78S Recording/Playback Pre-/Power Amplifier IC for V Microcassette Overview The AN78S is an integrated circuit developed for recording playback pre-/power amp., built-in

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for TV AN5385K Contour correction IC Overview The AN5385K is an IC which conducts contour correction for luminance signal and color difference signal. It corresponds to all broadcasting systems of

More information

XN04312 (XN4312) Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Composite Transistors. For switching/digital circuits

XN04312 (XN4312) Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Composite Transistors. For switching/digital circuits Composite Transistors XN (XN) Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr) For switching/digital circuits Features Two elements incorporated into one package (Transistors

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Hall ICs DN8897/SE/S Wide operating temperature range ( 4 C to + C) Alternating magnetic field operation DN8897 4.5±.2 4.±.2 Unit: mm 2.±.2 (.7) (5 ) Overview In each of Hall ICs, a Hall element, an amplifier

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Audio Common Use AN7348K Dual Record/Playback Pre-Amplifier IC for Double Cassette Overview The AN7348K is a monolithic integrated circuit designed for double cassette recorder. It has dual channel

More information

I F = I R = 100 ma, I rr = 0.1 I R, Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.

I F = I R = 100 ma, I rr = 0.1 I R, Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. Silicon epitaxial planar type For small current rectification DB2J316 in SSMini2 type package Unit: mm Features Low forward voltage V F Short reverse recovery time t rr Halogen-free / RoHS compliant (EU

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Others 8-Bit Shift Register Latch Cotant Driver IC Overview The is a semiconductor integrated circuit which iorporates a 8-bit shift register, a latch driver and a cotant current driver to satisfy the

More information

Maintenance/ Discontinued

Maintenance/ Discontinued DATA SHEET Part No. AN26261A Package Code No. ULGA031-W-3525 includes following four Product lifecycle stage. Publication date: January 2006 1 Contents Overview. 3 Features.. 3 Applications 3 Package.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Digital Still Camera Sound input/output interface IC for digital still camera Overview The is a sound input/output interface IC which is optimum for incorporation of sound functions in a digital

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Hall ICs DN6852 Switch type, Wide operating supply voltage range (V CC = 3.6 V to 16 V) One-way magnetic field operation Overview DN6852 is a semiconductor integrated circuit utilizing the Hall effect.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued Hall ICs DN6848/SE/S Wide operating temperature range ( 40 C to +00 C) One-way magnetic field operation Overview In each of Hall ICs, a Hall element, an amplifier circuit, a Schmidt circuit, a stabilized

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for FM/AM Tuner ANS FM Front-end Circuit for Car Radio Overview The ANS is an FM front-end IC designed for DTS except RF amp. of car radio. It is built-in local oscillation frequency buffer output

More information

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification.

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification. DMG242 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) Unit: mm For general amplification Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter

More information

DB2J50100L DB2J50100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For high speed switching circuits. Internal Connection

DB2J50100L DB2J50100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For high speed switching circuits. Internal Connection Revised : 03-- Doc No. TT-EA-350 Revision. Silicon epitaxial planar type For high speed switching circuits.5 0.35 Unit: mm 0.3 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free

More information

DME20B01. Silicon PNP epitaxial planar type (Tr1) Silicon NPN epitaxial planar type (Tr2) For general amplification. Features. Marking Symbol: A3

DME20B01. Silicon PNP epitaxial planar type (Tr1) Silicon NPN epitaxial planar type (Tr2) For general amplification. Features. Marking Symbol: A3 DME2B Silicon PNP epitaxial planar type (Tr) Silicon NPN epitaxial planar type (Tr2) For general amplification Unit: mm Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter

More information

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For general amplification DMG20401 in SMini6 type package

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For general amplification DMG20401 in SMini6 type package DMG54 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) For general amplification DMG24 in SMini6 type package Unit: mm Features High forward current transfer ratio h FE with

More information

UNA0216 (UN216) Silicon PNP epitaxial planar type (3 elements) Silicon NPN epitaxial planar type (3 elements) Small Signal Transistor Arrays

UNA0216 (UN216) Silicon PNP epitaxial planar type (3 elements) Silicon NPN epitaxial planar type (3 elements) Small Signal Transistor Arrays Small Signal Transistor Arrays UNA26 (UN26) This product complies with the RoHS Directive (EU 22/95/EC). Silicon PNP epitaxial planar type (3 elements) Silicon NPN epitaxial planar type (3 elements) For

More information

DA3J101F0L DA3J101F0L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3

DA3J101F0L DA3J101F0L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3 Revised : 201-06-0 Doc No. TT-EA-11766 Silicon epitaxial planar type For high speed switching circuits DAX101F in SMini type package 2.0 0. Unit: mm 0.1 Features Small reverse current IR Short reverse

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Optical Disk Drive AN8737SB 3-channel driver IC for optical disk drive Overview The AN8737SB is a BTL type 3-channel driver IC, adopting a current feedback system for channels, which makes it optimum

More information

DA2J10100L DA2J10100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection

DA2J10100L DA2J10100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection Revised : 03-05-9 Doc No. TT-EA-88 Silicon epitaxial planar type For high speed switching circuits.5 0.35 Unit: mm 0.3 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS

More information

DATA SHEET. Part No. AN44075A

DATA SHEET. Part No. AN44075A DATA SHEET Part No. Package Code No. AN4407A HSOP034-P-0300A Publication date: October 2008 1 Contents Overview.. 3 Features.. 3 Applications. 3 Package. 3 Type.... 3 Application Circuit Example (Block

More information

DMC904F0. Silicon NPN epitaxial planar type. For high frequency amplification. Features. Marking Symbol: D3. Basic Part Number.

DMC904F0. Silicon NPN epitaxial planar type. For high frequency amplification. Features. Marking Symbol: D3. Basic Part Number. DMC9F Silicon NPN epitaxial planar type For high frequency amplification Unit: mm Features High forward current transfer ratio h FE with excellent linearity High transition frequency f T Halogen-free /

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Compact Disc/CD-ROM Player AN8730SB 4-channel driver IC for optical disk Overview The AN8730SB is a 4-channel driver IC, which can operate in a low voltage, employing the low power consumption

More information

BAS16 Silicon epitaxial planar type

BAS16 Silicon epitaxial planar type Silicon epitaxial planar type For high speed switching circuits Panasonic parts No. DAY101K 2.9 Unit : mm 0. 0.1 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS compliant

More information

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For digital circuits DMG26401 in SMini6 type package

DMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For digital circuits DMG26401 in SMini6 type package Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) For digital circuits DMG264 in SMini6 type package Unit: mm Features Low collector-emitter saturation voltage V CE(sat) Halogen-free

More information

DB L DB L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection

DB L DB L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection Established : -3- Revised : 3-4- Doc No. TT4-EA-49 Revision. DB466L Silicon epitaxial planar type For rectification Features Low forward voltage VF Forward current (Average) IF(AV) = 3 A rectification

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for TV AN5186FB VIF/SIF IC for car-tv Overview The AN5186FB is a VIF/SIF signal processing IC for in-car television. The video and sound are completely separated by the adoption of split carrier method.

More information

DA22F2100L DA22F2100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection

DA22F2100L DA22F2100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection Established : 00-0- Revised : 03-05-3 Doc No. TT-EA-363 Silicon epitaxial planar type For high speed switching circuits.6 Unit: mm 0.3 Features Small reverse current IR Short reverse recovery time trr

More information

Parameter Symbol Conditions Min Typ Max Unit Forward voltage V F I F = 10 ma V V

Parameter Symbol Conditions Min Typ Max Unit Forward voltage V F I F = 10 ma V V Zener Diodes MAZDxxx Series Silicon planar type For constant voltage, constant current, waveform clipper and surge absorption circuit 0.60±0.05 0.20±0.05 0.2 +0.05 0.02 Unit: mm Features Low noise type.00±0.05.40±0.05

More information

DA6X102S0R Silicon epitaxial planar type

DA6X102S0R Silicon epitaxial planar type Silicon epitaxial planar type For high speed switching circuits 2.9 0.5 0.3 Unit: mm 0.13 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free / RoHS compliant (EU RoHS / UL-9

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs f CD/CD-ROM Player AN83N 3-channel Linear Driver Overview The AN83N is an IC which incpates 3 circuits of drivers f driving various DC mots such as actuats (focus, tracking, traverse), sdles, and loading

More information

DB4X501K0R Silicon epitaxial planar type

DB4X501K0R Silicon epitaxial planar type Silicon epitaxial planar type For high speed switching circuits DB2J501 in Mini type package 2.9 (0.95) (0.95) Unit: mm 0.1 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free

More information

DA4X106U0R Silicon epitaxial planar type

DA4X106U0R Silicon epitaxial planar type Established : 2010-0-19 Doc No. TT-EA-12528 DAX106U0R DAX106U0R Silicon epitaxial planar type For small current rectification 2.9 (0.95) (0.95) Unit: mm 0.13 Features Short reverse recovery time trr Low

More information

DA6X106U0R Silicon epitaxial planar type

DA6X106U0R Silicon epitaxial planar type Silicon epitaxial planar type For high speed switching circuits 2.9 0.3 Unit: mm 0.13 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free / RoHS compliant (EU RoHS / UL-9

More information

MTM761110LBF MTM761110LBF. Silicon P-channel MOSFET. for Switching. Internal Connection. Pin name

MTM761110LBF MTM761110LBF. Silicon P-channel MOSFET. for Switching. Internal Connection. Pin name MTM76111LBF Silicon P-channel MOSFET for Switching MTM76111LBF Unit: mm Features Low drain-source ON resistance:rds(on) typ = 26 mω (VGS = -4.5 V) Low drive voltage: 1.8 V drive Halogen-free / RoHS compliant

More information

DA2J10400L DA2J10400L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection

DA2J10400L DA2J10400L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection Established : 009-09- Revised : 03-05-9 Doc No. TT-EA-89 Silicon epitaxial planar type For high speed switching circuits.5 0.35 Unit: mm 0.3 Features Small reverse current IR Low terminal capacitance Ct

More information

DA2S00100L DA2S00100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For band switching. Internal Connection

DA2S00100L DA2S00100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For band switching. Internal Connection Doc No. TT-EA-3073 Silicon epitaxial planar type For band switching 0.8 Unit: mm 0.3 Features Low forward dynamic resistance rf Halogen-free / RoHS compliant (EU RoHS / UL-9 V-0 / MSL:Level compliant)..6

More information

FCAB22370L1 Gate resistor installed Dual N-channel MOS FET

FCAB22370L1 Gate resistor installed Dual N-channel MOS FET Established : 205--23 Doc No. TT4-EA-5073 Revision. Gate resistor installed Dual N-channel For lithium-ion secondary battery protection circuits 3.05 6 5 4 Unit: mm Features Low source-source ON resistance:rss(on)

More information

MTM232232LBF Silicon N-channel MOSFET

MTM232232LBF Silicon N-channel MOSFET MTM33LBF Silicon N-channel MOSFET For switching MTM33LBF Unit: mm Features Low drain-source ON resistance:rds(on)typ. = mω (VGS = 4. V) Low drive voltage:.5 V drive Halogen-free / RoHS compliant (EU RoHS

More information

DSA7101. Silicon PNP epitaxial planar type. For low frequency amplification Complementary to DSC7101. Features. Marking Symbol: 4C.

DSA7101. Silicon PNP epitaxial planar type. For low frequency amplification Complementary to DSC7101. Features. Marking Symbol: 4C. DSA711 Silicon PNP epitaxial planar type For low frequency amplification Complementary to DSC711 Unit: mm Features Low collector-emitter saturation voltage V CE(sat) Halogen-free / RoHS compliant (EU RoHS

More information

MTM861280LBF MTM861280LBF. Silicon P-channel MOSFET. Doc No. TT4-EA Revision. 2. For Switching. Internal Connection.

MTM861280LBF MTM861280LBF. Silicon P-channel MOSFET. Doc No. TT4-EA Revision. 2. For Switching. Internal Connection. Established : 2-2-4 Revised : 237 Doc No. TT4-EA238 MTM8628LBF Silicon P-channel MOSFET For Switching MTM8628LBF Unit : mm Features Low drain-source On-state Resistance : RDS(on) typ. = 3 mω (VGS = -4.

More information

BAS16 Silicon epitaxial planar type

BAS16 Silicon epitaxial planar type Silicon epitaxial planar type For high speed switching circuits Panasonic parts No. DAY101K 2.9 Unit : mm 0. 0.1 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS compliant

More information

DB2L33500L1 For rectification

DB2L33500L1 For rectification Doc No. 4-EA-15065 For rectification Features Average Forward Current IF(AV) 0.1 A rectification is possible Low Forward Voltage High power capability due to Chip Size Package RoHS compliant (EU RoHS /

More information

130 Reverse current IR VR = 1 V. 20 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma mv/ C Note) 1.

130 Reverse current IR VR = 1 V. 20 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma mv/ C Note) 1. Established : 009-0-4 Revised : 03-07-0 Doc No. TT4-EA-540 Silicon epitaxial planar type For constant voltage / For surge absorption circuit.5 0.35 Unit: mm 0.3 Features Excellent rising characteristics

More information

DB2J41100L DB2J41100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection

DB2J41100L DB2J41100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection Established : 9--9 Revised : 3-4- Doc No. TT4-E-487 Revision. DBJ4L Silicon epitaxial planar type For rectification.5.35 DBJ4L Unit: mm.3 Features Low forward voltage and low reverse leakage current Short

More information

MTM232270LBF Silicon N-channel MOSFET

MTM232270LBF Silicon N-channel MOSFET MTM37LBF Silicon N-channel MOSFET For switching MTM37LBF Unit: mm MTM37 in SMini3 type package Features Low drain-source ON resistance:rds(on) typ. = 85 mω (VGS = 4. V) Low drive voltage:.5 V drive Halogen-free

More information

DB2W31800L DB2W31800L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 4. For rectification. Internal Connection

DB2W31800L DB2W31800L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 4. For rectification. Internal Connection Silicon epitaxial planar type For rectification.6 Unit: mm.3 Features Low forward voltage VF Low terminal capacitance Ct Halogen-free / RoHS compliant (EU RoHS / UL-94 V- / MSL:Level compliant).6 3.5 Marking

More information

1 000 pcs / reel (standard) Max 40. Min - Symbol VR VF IF = 1.0 A

1 000 pcs / reel (standard) Max 40. Min - Symbol VR VF IF = 1.0 A Doc No. 4-EA-15069 For rectification Features Low forward voltage VF Forward current (Average) IF(AV) 1.0 A rectification is possible RoHS compliant (EU RoHS / MSL:Level 1 compliant) Marking Symbol: D5

More information

FK6K0335ZL Resistors, Zener Diode installed N-channel MOS FET

FK6K0335ZL Resistors, Zener Diode installed N-channel MOS FET Resistors, Zener Diode installed N-channel For passive cell balancing circuits 2.0 0.2 Unit : mm 0.3 Features Build in Gate Resistor, Gate-source Resistor and Zener Diode Drain-source ON-state Resistance

More information

DB L DB L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection

DB L DB L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For rectification. Internal Connection Established : -3- Revised : 3-4- Doc No. TT4-EA-49 Revision. DB466L Silicon epitaxial planar type For rectification Features Low forward voltage VF Forward current (Average) IF(AV) = 3 A rectification

More information

FK L FK L. Silicon N-channel MOSFET. Doc No. TT4-EA Revision. 4. For switching FK in SMini3 type package

FK L FK L. Silicon N-channel MOSFET. Doc No. TT4-EA Revision. 4. For switching FK in SMini3 type package Established : 2-5-3 Revised : 25-5-8 Doc No. TT4-EA-385 FK353L Silicon N-channel MOSFET For switching FK333 in SMini3 type package FK353L Unit : mm Features Low drive voltage : 2.5 V drive Halogen-free

More information

FK L Silicon N-channel MOS FET

FK L Silicon N-channel MOS FET Established : 2-5-7 Revised : 2-6-24 Doc No. TT4-EA-2576 FKL Silicon N-channel For switching FK5 in SSSMini type package.2. FKL Unit : mm. Features Low drive voltage: 2.5 V drive Halogen-free / RoHS compliant

More information